Project Catalog # Type

Prepared by Notes Date

HLB6

6" LED Lens Downlight with Remote Driver /

Junction Box

Typical Applications
Residential

Product Certification
Interactive Menu
• Order Information page 2
• Photometric Data page 2
Refer to ENERGY STAR® Certified Products List.
• Energy Data page 3 Can be used to comply with California Title 24 High Efficacy requirements.
Certified to California Appliance Efficiency Database under JA8.

• Product Specifications page 3

• Product Warranty Product Features

• Dimming Guide

Top Product Features

• Direct mount (does not require recessed housing or junction box)
• Delivers up to 1,150 lumens; Achieves L70 at 50,000 hours in IC and non-IC applications
• 2700K, 3000K, 3500K, 4000K and 5000K field selectable CCT; 3000K and 4000K fixed CCT
• 90 CRI (min), R9 50 and color accuracy within 4 SDCM
• Wet location listed for showers and protected ceilings; Available in 120V or 120-277V

Dimensional and Mounting Details

HLB6ROTMW
6-1/8"
[155.58mm] Oversized trim
cutout .47"
8.86"
[11.9mm] [225mm]
4.18" max. ceiling cutout
[106.3mm]
Ø 5.02" .12"
[127.6mm] [3.05mm]
6.7" [170.07mm] 6.8" [172.72mm]
3.87"
[98.2mm]
2.86" wire length
[72.74mm] 10"
3.16" [254mm]
[80.29mm] wire length
1.66" 4.92"
[42.15mm]
6.42" [125mm]
(HLB4069FS1EMW only) [163mm]
Ø.20" 1.66"
[5mm] [42.15mm]

Ø.47" 6.5" [165mm]

5.7"
[144.5mm] [12mm]

PS518048EN page 1
February 10, 2021 11:04 AM
 HLB6 Series
Order Information
SAMPLE ORDER NUMBER: HLB6099FS1EMWR

Models Lumens CRI / CCT Driver Finish Packaging

Models Lumens CRI / CCT Driver Finish Packaging

HLB6 = 6 -Inch LED lens 09 = 900 lumens (nominal) 930 = 90 CRI minimum, 3000K CCT 1E = 120V 60Hz, LE & TE phase MW = matte white flange R = recyclable 4-color unit carton suitable for
downlight with remote 940 = 90 CRI minimum, 4000K CCT cut 5% dimming point of purchase merchandising display
driver / junction box 9FS = 90 CRI minimum, field selectable E010 = 120-277V, 0-10V 5%
2700K, 3000K, 3500K, 4000K or dimming (1)
5000K CCT

Notes Notes Notes Notes Notes Notes

(1) E010 driver is only available in FS
color temperature.

Accessories

Accessories

HL6RSMF = 6” round and square mounting frame Extension Cable | Dedicated Driver/Jbox
HLB6ROTMW = 6” round oversized trim, matte white HLB06EC – 6 ft. extension cable
HLB12EC – 12 ft. extension cable
Designer Trims HLB20EC – 20 ft. extension cable
HLB6RTRMMW = 6” round decorative overlay, matte white
HLB6RTRMSN = 6” round decorative overlay, satin nickel Extension Cable | seleCCTable Driver/Jbox
HLB6RTRMTBZ = 6” round decorative overlay, tuscan bronze HLB06FSEC – 6 ft. extension cable
HLB12FSEC – 12 ft. extension cable
HLB20FSEC – 20 ft. extension cable

Photometric Data
HLB6099FS1EMWR-3000K Color Metric Summary - 3000K Product Specifications

Luminaire lumens 1023

Rf = 90.9
Input watts 13.8 TM-30-15
Rg = 100.7 PRODUCT
LER (LPW) 74.1
Ra = 94.1 SPECIFICATIONS
0-180 1.31 CRI/CIE
R9 = 68.5 110°
Spacing Lumens 1023
90-270 1.31
Criteria CCT - Range of 2700K- 5000K
Diagonal 1.41 Watts 13.8
Beam angle (degrees) 112.2
Lumens Per Watt (Efficacy) 74.1
Field angle (degrees) 161.3
Color Accuracy (CRI) 94
Zonal lumen Lumens % Lumens
0-30 294 27.7 Light Color (CCT) 3000K
Correlated Color Temperature (CCT)
0-40 486 45.8
0-60 851 80.2
warm white soft white bright white
0-90 1061 100
2700K 3000K 4500K 6500K

HLB6 6-inch CCT Lumens Power (W) LPW

3000K 992.3 13.6 73.4
Fixed CCT
4000K 1057.7 13.6 78.0
2700K 989 13.7 72.2
3000K 1023 13.8 74.1
* Tested in accordance with IES LM63. Field results may vary. Field
3500K 1060 13.8 76.8
Selectable CCT
4000K 1096 13.8 79.4

5000K 1141 13.7 83.3

PS518048EN page 2
February 10, 2021 11:04 AM
 HLB6 Series
Energy Data
Lumens 900 Series
Input Voltage 120V
Input Current 132 (mA)
Input Power 13.8 (W)
Efficiency 74.1 (LPW)
Inrush (A) 2.1 A @ 14mS
THD ≤ 20%
PF ≥ 0.90
T Ambient -30° - +40°C
Sound Rating ≤ 22 dba

Product Specifications
Housing Remote Driver/Junction Box Optical Mounting Frame
• Die-cast aluminum mounting frame with integral • Pre-galvanized steel driver/junction box with captive • Pre-galvanized steel mounting frame locates fixture
flange provides passive thermal cooling hinged junction box cover fittings during electrical rough-in and provides
• Achieves L70 at 50,000 hours in IC and non-IC • Listed for six #12 AWG 90° C splice conductors: two cutout guidance for drywall contractor
applications in, two out plus two ground • Provides attachment of remote driver/junction box
• High impact diffuse lens provides shielding to the • Two 1⁄2" conduit pry-outs
light guide minimizing pixilation • Two Slide-N-Side™ non-metallic (NM) wire traps Compliance
allows wiring outside the box • cULus Certified type IC suitable for direct contact
Gasket • Accepts NM cable types: 14-2, 14-3, 12-2, 12-3 (U.S.) with air permeable insulation
• Closed cell gasket achieves restrictive airflow and and 14-2, 14-3, 12-2 (Canadian) • Not recommended for use in direct contact
wet location listing without additional gaskets or • Three 4-port push wire nuts with clear caps for quick with spray foam insulation (reference NEMA
caulking and reliable mains voltage connections LSD57-2013)
• Integral mounting holes facilitate direct mounting to • Wet location listed and IP44 ingress protection
Optics • Airtight per ASTM-E283-04
building structure or mounting frame
• Precision acrylic light guide organizes source flux • Suitable for use in clothes closets when installed
into wide distribution with 1.4 spacing criteria, useful in accordance with the NEC 410.16 spacing
Driver
for general area illumination requirements
• Available in 120V or 120-277V, providing noise free
LED Array operation • EMI/RFI emissions per FCC 47CFR Part 15
• Continuous flicker-free dimming down to 5% with consumer limits
• Plurality of mid power LED’s provides a uniform
source with high efficiency and long life select dimmers • Contains no mercury or lead and RoHS compliant
• 90 CRI minimum; R9 greater than 50 provides high • Plenum rated inline electrical quick connect provides • Photometric testing in accordance with IES
color rendering low voltage connection to fixture fitting, CMP/FT6 LM-79-08
rated • Lumen maintenance projections in accordance with
• Fixed 3000K and 4000K CCT color temperatures;
color accuracy within 3 SDCM IES LM-80-08 and TM-21-11
Installation • State of California Title 24 high efficacy
• Optional field selectable color temperature, select • Can be installed in 1/2" to 1-1/4" thick ceilings
2700K, 3000K, 3500K, 4000K or 5000K CCT; color • LED compliance under JA8, reference Modernized
accuracy within 4 SDCM • Cutout utilizes standard round hole saw sizes; Appliance Efficiency Database System (MAEDBS)
cutout template provided for 2016 JA8 High Efficacy Lighting
• Meets ENERGY STAR® color angular uniformity
requirements; Deviation is less than 0.006 u' v' • Heat treated springs hold fixture fitting securely in • ENERGY STAR® certified (reference “Certified Light
the ceiling eliminating light leak Fixtures” database)
• Housing is less than 1⁄2" thick and can span a 2"
nominal framing member Warranty
• Can be removed from below the ceiling for service • Five-year limited warranty
or replacement

Cooper Lighting Solutions © 2020 Cooper Lighting Solutions

1121 Highway 74 South All Rights Reserved.
Peachtree City, GA 30269
P: 770-486-4800 Specifications and dimensions PS518048EN page 3
www.cooperlighting.com subject to change without notice. February 10, 2021 11:04 AM