100% found this document useful (1 vote)
1K views7 pages

Decoder

Uploaded by

kolwin .chindwin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
1K views7 pages

Decoder

Uploaded by

kolwin .chindwin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

The new national standard version of the integrated decoder

of Xinshida and Monak

1: Detailed equipment :

2 Basic description
The left side of the decoder device is powered by a power bank or computer
through an Android data cable, and the right side is clamped
Clip it to the designated chip on the motherboard.
3: Need to clip the chip number of the chip

Chip location number


Board model Version requirements

U16
F5021 F5021 and special version,

S8/AS380/DP
U10
Version,U7/U30 S8/AS380?DP-Cand Special
MCTC-MCB-G
MNK 1000 U92

MCTC-MCB-A/B/K1 Chip
MNK 3000/K1-1 U22 version before 20790

MNK3000-2
U22
Chip version 20790 and later
MCTC-MCB-C1 MCTC-
MCB-C2
MNK3000(15.00) U45
MCTC-MCB-C3

MNK3000(16-19) U45
Monarch version 16.00 -19.00
Monarch 5000 motherboard
MNK5000 U45

YIINGWEITEN U25
INVT EC100 motherboard

ME320 inverter U6 ME320LN inverter

MNK1000-1
U92 MCTC-MCB-G later version

Monarch 3000NEW new


3000+(20.02-) U45/U37 national standard 20.00
Later version

MCTC-PES-E1
MCTC-PES-E1
4: Precautions for the use of test clips
The red wire corresponds to pin 1. When the test clip is connected to the chip, the pin should
be aligned with the chip pin
Yes, do not reverse the connection.
5: The connection position of the test clip and the motherboard

Newstar F5021
motherboard
U16 chip
Newstar S8
motherboard
Connect U7 chip
Xinshida AS380
access
U30 chip

Monarch
MCTC-MCB-G
connection chip
U92
Monarch
NICE3000-
K1-1 connect to
U22 chip

Monarch
MCTC-MCB-
C1 C2 C3 connect
to U45 core

Monarch
3000-XGB
U37 or U45
3000+(20.02 double
panel U37

After 16.00 and the new national standard


motherboard decryption method:
1: Remove the motherboard from the control cabinet and remove the waterproof paint on the
chip pins:
2: Use the decoder menu 3000+ (16.00-19.00) or 3000+ (20.02) to clamp the motherboard
chip,
After successful decryption, the motherboard displays the advanced password 11110
3: The main board is installed on the control cabinet to power on, and the server long presses
the green RUN and red STOP buttons ,
Display and enter five horizontal lines, enter 11110, enter the FP-00 menu, and change the
password to 0.
6: Matters needing attention

1 .When decrypting, make sure that the motherboard has been powered off and remove the
motherboard .
2. Newstar motherboard directly displays the primary, secondary and tertiary passwords of
the motherboard.
3. Monarch MCB-G\MCB-A\MCB-B will display the unique password
4. Monak MCB-C will display the first, second and third level passwords.
5 Test clip to the designated chip, and power on. If the screen brightness is dim, it means that
the chip holder
To the wrong direction, you need to change the direction of the chip holder and then send
power, select the type button through the motherboard.

You might also like