Scribd
Upload
33 views

Creating A CD in USB Pen Drive

This document provides instructions for creating a bootable CD-ROM partition on a USB flash drive using a Phison PS2134 controller and Phison utility software. It describes downloading and running the utility to initialize the controller in standard mode first if needed. Then it outlines the two step process to: 1) initialize the controller in standard mode and 2) create an extended CD-ROM partition and select an ISO image file to make the flash drive bootable for installing operating systems, running live CDs, or Windows PE.

Uploaded by

Sounak Choudhury
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
33 views

Creating A CD in USB Pen Drive

This document provides instructions for creating a bootable CD-ROM partition on a USB flash drive using a Phison PS2134 controller and Phison utility software. It describes downloading and running the utility to initialize the controller in standard mode first if needed. Then it outlines the two step process to: 1) initialize the controller in standard mode and 2) create an extended CD-ROM partition and select an ISO image file to make the flash drive bootable for installing operating systems, running live CDs, or Windows PE.

Uploaded by

Sounak Choudhury
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 14

Creating a CD-ROM partition on the flash

(controller Phison PS2134)


Bootable USB Flash

This article describes the option to create an extended partition on the flash CD-ROM. In
this section, you can place any image CD / DVD. For example, images of Windows PE /
BartPE, LiveCD or any other images to install operating systems. For example, used the
flash Kingston DataTraveler 1Gb controller Phison PS2134 and utility Phison UP13 UP14
UP12 v1.96 .( http://www.flashboot.ru/files/file/10/)

Below instructions for sticks with a Phison model PS2134 controller, grabbed
as they are from here (http://flashboot.ru/index.php?
name=News&op=article&sid=23). I personally re-flashed 2 sticks, a 1 GByte
Kingston Data Traveler II and a 4 GByte Apacer AH320. I have tested these
'flash CdRoms' by installing Linux Ubuntu, Windows XP Cds and Windows 7
Dvd (this one using the 4 Gbyte stick). In order to find out if a stick can be re-
flashed by following the technique below described the first step is to test, by
using an appropriate software, if the Phison controller is 'on board'. Download
(always from the same russian site): the appropriate software (it's in English
http://flashboot.ru/index.php?name=Files&op=view_file&lid=125) ant it's just
the utility suppliead by Phison to initialize and flash it own controllers.
before you go on be aware that there is no warranty you will be able to
succesfully flash a CdRom drive, in worst case you may totally destroy
(become unrecoverable) the stick !.
1) Insert the stick in an USB port and make sure it has been recognized by
Windows
2) Run F1_90_v196_00.exe (you get it from zip
'Phison_UP13UP14UP12_V1.96')
3) Press the 'Get Info.' button. Pay attantion, do not press any other button or
you may erase the stick !.
4) If you get the message 'No drive found!' you can't go on, you stick can not
be flashed by this software.
5) If you see all the stick technical information in the 'Test Information' window
then you can try.
6) Go on by following the instructions written here
(http://flashboot.ru/index.php?name=News&op=article&sid=23).

The utility allows you to set the controller to one of the following
configurations:
Mode 3 - standard mode. The standard stick: a read / write disk unit
Mode 4 - 2 sections. A Floppy unit and the standard disk unit (*)
Mode 7 - 2 sections. Two independent flash disk units
Mode 8 - 2 sections. Hidden, password protected section and a standard disk
unit (*)
Mode 14 - 3 sections. Standard disk unit, HDD (not visible in Windows XP)
and CD sections
Mode 21 - 2 sections. A CD (read only) section and the standard disk unit (*)
(*) : the unused flash memory part is left availabe to user as a second disk
unit so you can use it as a standard USB stick

Stefano

Kind flash from the controller. View from the memory.First you need to flash the controller
with standard settings. This is useful if a flash was already a partition (hidden or CD-ROM).If
additional sections were not - go to step 2.

Step 1. Unpack utility, such as the directory C: \ Temp Run ParamEdt-F1-


v1 .0.20.2.exe. On the F1-PS223X that does not change, go to the tab F1-1. Fill in the
values as in the screenshot. VID & PID - can be real, or any value in the format
0x0000. Fields Manufacturer, Product can be arbitrary. Inquiry Revision value does not
change. Noting box Preformat we include low-level format. Utstanavlivaem values tab
Controller as in the screenshot. Then, save the settings Save As, for example
PS2134_flash.ini Close the configuration utility. Run F1_90_v196_00.exe and select the
previously created file PS2134_flash.ini Connect flash to the computer. Press Start. This
starts the process of low-level formatting. then the completion message appears
formatting. reconnect flash, flash forward to the definition in the system. Flash is defined as
USB DISK 28X USB Device. LED at this time will periodically flash. Now click OK. Formatting
completed successfully.reconnect flash. Format the standard stredstv Windows.

Step 2. Create an extended partition CD-ROM. Run ParamEdt-F1-v1.0.20.2.exe Go to the


tab F1-1. Fill in the values as in the screenshot. I draw your attention that the mode is set
to Mode 21 and removed the flag Preformat. F1-2 tab select the image CD, for example, the
selected image of Windows XP. Sets the value of the tab Controller as in the
screenshot. Then save the settings Save As under the name, for example
PS2134_flash_cd.ini Run F1_90_v196_00.exe, select the created ini file
PS2134_flash_cd.ini Click Start. Start the process of testing and recording the image. When
the image is recorded window will be painted green. The LED will blink
continuously. reconnect flash. Windows will detect the two devices, CD-ROM and a regular
removable drive. now by booting from flash you can install the operating system, to run a
LiveCD or Windows PE for the treatment of viruses and resuscitation system.

You might also like