CATALOGUE

1. FEATURE INTRODUCTION……………………………….2
2. PARTS LIST………………………………………………….3
3. SYSTEM ASSEMBLY……………………………………….3
4. SYSTEM OPERATION………………………………………4
5. SYSTEM SETTING………………………………………….5
6. COIN AND CREDIT VALUE SETTING TABLE…………...5
7. SYSTEM FUNCTION SETTING TABLE…………………...5
8. VIDEO OUTPUT MODE SETTING…………………………5
9. GAME LIST HIDE/SHOW…………………………………...6
10. SAVE MODIFIED GAME LIST……………………………...8
11. ONE GAME BUSINESS MODE……………………………..9
12. DELETE GAME FROM GAME LIST……………………….9
13. ADD GAMES FROM ALL GAME LIST
TO ONE OF GAME LISTS…………………………………….10
14. LANGUAGE SETTING……………………………………....11
15. NEW GAMES UPDATE……………………………………...12
16. GAME CONFIGURATION SETTING…….…………………12
Type 1: Original setting is on screen setting mode……………...12
SAVE MODIFIED GAME CONFIGURATION SETTING…... 13
Type 2: Original setting is DIP SW setting mode…………….…14
Type 3: Special setting mode…………………………………....15
17. CHANGE 2P or 4P PLAY MODE…………………………......17
18. TROUBLE SHOOTING……………………………………….17
19. GAMES FAMILY HARD DISC DATA RETRIEVE…………. 18
20.JAMMA CONNECTOR PIN OUT DEFINITION……………...19

-1-
 JAMMA CONNECTOR PIN OUT DEFINITION:
GAMES FAMILY USER MANUAL (4P) SOLID SIDE PART SIDE
Thank you for purchasing this product. For your convenient to GND A 1 GND
understand this system operation, we hope you read this manual detail. GND B 2 GND
+5V C 3 +5V
+5V D 4 +5V
FEATURE INTRODUCTION: N． ．C．． E 5 N． ．C．．
1. Protect JAMMA I/O from damage of incorrect connection +12V F 6 +12V
2. Use P4 motherboard, Intel Celeron4 CPU, Hard Disc, 256M DDR. KEY NO PIN H 7 KEY NO PIN
3. Installed multi game emulators software. N． ．C．． J 8 COIN COUNTER
N． ．C．． K 9 N． ．C．．
4. Allow coins inserted before game selection.
RIGHT SPEAKER L 10 LEFT SPEAKER
5. After power on player can insert coin at any time GND M 11 N.C.
6. Support 4 people play mode. VIDEOGREEN N 12 VIDEO RED
7. Support one game / multi games business mode. VIDEO SYNC P 13 VIDEO BLUE
8. Support 3D games. N.C. R 14 N.C.
9. Support video mode: VGA (31KHZ), NTSC (15KHZ), PAL N.C. S 15 N.C.
COIN 2 T 16 COIN 1
(15KHZ), SEGA (24KHZ).
2P START U 17 1P START
10. Support two-channel stereo audio. 2P UP V 18 1P UP
11. Faster I/O response and more stable system operation. 2P DOWN W 19 1P DOWN
12. Classified all games to Stage, Flying/Shooting, Wrestle/Fighting, 2P LEFT X 20 1P LEFT
Maze/Puzzle, Adult, Sport, Misc./Others, and Special/Classical 2P RIGHT Y 21 1P RIGHT
game list. 2P SHOOT 1 Z 22 1P SHOOT 1
2P SHOOT 2 a 23 1P SHOOT 2
13. Each game list can be hided or showed.
2P SHOOT 3 b 24 1P SHOOT 3
14. Each game in list can be deleted or called back. 2P SHOOT 4 c 25 1P SHOOT 4
15. Support simple Chinese and English. 2P SHOOT 5 d 26 1P SHOOT 5
16. Game configurations are adjustable. GND e 27 GND
17. Support coin counter. GND f 28 GND
18. Set all games coin and credit value by one DIP SW.
19. One touch key can retrieve data automatically when Hard Disc
data lost.
20. Support new games update.

-2- - 19 -
next power on. PARTS LIST:
A: After mode changed, please excuse any game and then exit from 1. Games Family mainboard. (Double deck).
the game to the game list. 2. 3&4p connector board with a Cable wire.
3. A/V wires. (8 wires for 3&4P audio and video input).
Q: When connected 2 machines for 4 people playing, one of the
4. 5 line wires. (For 1P&2P shooting button 5th& 6th).
chassis always be destroyed, why?
5. ATX power supplier with an AC power wire.
A: Please install transformer into machine to isolate A.C. power of 6. User manual.
chassis with another one.
GAMES FAMILY HARD DISC DATA RETRIEVE Suggestion: If you need to deliver this product to your customer
1. Connect hard disc(data lost) to IED2 port of GAMES FAMILY please mind keeping the cushion package box complete to avoid the
mainframe and connect power to hard disc. (Figure 45) HARD DISC damaged.
2. Set bit 4 of SW2 at ON position.
SYSTEM ASSEMBLY:
3. After turn ON cabinet power, click 2P START button immediately
1. Finish each parts connection as the picture below (Figure 1):
until the Ghost clone program display on screen, system will
proceed data retrieve procedure automatically. (It’s on VGA mode.
To monitor the procedure, please connect VGA monitor.)
4. Around 20 minutes later, system will complete clone procedure
and shut down automatically.
5. Remove IDE2 hard disc and set bit 4 of SW2 at OFF position and
proceeds as normal.

(Figure 45)
(Figure 1)
- 18 - -3-
Warning: Use a wrong A.C. power input or connect the mainboard 10. Operate step 6 to 11 on page 13 for saving the game configuration
with JAMMA slot opposite direct would destroy power supplier or setting (Figure 33).
mainboard seriously. CHANGE 2P or 4P PLAY MODE:
1. Switch ON bit 4 of SW2 (Figure 3).
2.Two channel stereo audio circuit (Figure 2):
2. Press MODE key (Figure 28) to change 2P or 4P mode.
3. Switch OFF bit 4 of SW2 (Figure 3).
4. enter any game and play once then exit from the game to the game
list ,It will save the setting.

TROUBLE SHOOTING
(Figure 2) (Figure 2.1) Q & A:
3. Counter connect circuit (Figure 2.1) Q: Pressed 1P START button for 3 seconds, also can’t back to game
list.
A: Switch off SW2 bit 4 and bit 3.
SYSTEM OPERATION:
Q: 3&4P connector board doesn’t work.
1. Switch on machine power and ATX Power Supplier (DO NOT A: Switch ON SW2 bit4.
press switch bottom of mainboard. The system will start Q: System can start but can’t entry game mode.
automatically in 3 seconds). After 90 seconds game list will shows A: Execute “GAMES FAMILY HARD DISC DATA RETRIEVE” on page
on screen 18.
2. Insert coins first and than select game. (It also could be adjusted to Q: After power on around 2 minutes, the picture still got messy (no
insert coins after game select. Please see SYSTEM FUNCTION synchronous).
SETTING TABLE on page 5.) A: It might be got a unbefitting video output mode, please change
3. Select game name by moving 1P joystick. Press 1P Start Button to video output mode to PAL or NTSC. (See page 6 “VIDEO OUTPUT
MODE SETTING”.)
start game mode.
Q: During 3P and 4P are playing, video mode always be changed.
4. Escape from game mode to game list by pressing 1P Start Button
A: Check bit 4 of SW2 whether it’s set at ON position, please set it at
(or pressing 1P start and A button, Please see SYSTEM OFF position after corrected video output mode.
FUNCTION SETTING TABLE on page 5.) for 3 seconds. Q: After power on, press the switch bottom of mainboard, system can’t
5. Change game list by pressing 1P button A or B. start and the fan have no rotation.
A: After switch machine power on, DO NOT press switch bottom of
mainboard. The system will start automatically in 3 seconds.
Q: Changed 2p or 4p playing mode but can’t keep playing mode after
-4- - 17 -
2. Select the game that will be set (Ex. Tank Force) and start the SYSTEM SETTING
game (Figure 40). COIN AND CREDIT VALUE SETTING TABLE:
3. Press ADJ2 (Figure 28). SW1:
4. Select “Dip Switches” item (Figure 40) and press 1P START
SW1
button. COIN CREDIT
4 2 1
1 COIN 1 CREDIT OFF OFF OFF
1 COIN 2 CREDITS ON OFF ON
1 COIN 3 CREDITS ON ON OFF
1 COIN 4 CREDITS ON ON ON
2 COINS 1 CREDIT OFF OFF ON
3 COINS 1 CREDIT OFF ON OFF
(Figure 41) (Figure 42) 4 COINS 1 CREDIT OFF ON ON
5. Select “Service Mode” item and set “On” by moving 1P joystick (TABLE 1)
left or right (Figure 41). SYSTEM FUNCTION SETTING TABLE
6. Press ADJ2 key (Figure 28) to close the current setting window
and modify configuration setting by 1P joystick (Figure 42).
7. After finished all configurations setting, press ADJ2 key (Figure
28) and set “Service Mode” Off (Figure 43).

(Figure 43) (Figure 44)

8. Press ADJ2 key (Figure 28) to delete the small setting window (TABLE 2)
(Figure 44). VIDEO OUTPUT MODE SETTING:
9. Press ESC key (Figure 28) to back to game list (Figure 29). 1. Switch ON bit 4 of SW2 (Figure 3).
- 16 - -5-
 (Figure 37). Select setting item or modify setting by moving 1P
joystick left or right (Figure 37).
5. After setting modified, select “Return to Main Menu” (Figure 38)
and press 1P START button to back to main menu (Figure 39).
6. Select “Return to Game” (Figure 39) and press 1P START button
to back to game mode (Figure 35).
7. Press ESC key (Figure 28) to back to game list (Figure 29).
8. Some of games will appears the dialog window (Figure 30) after
press ESC key (Figure 28), please select “Quit Game” item by 1P
joystick and press 1P START button to back to game list (Figure
(Figure 3) 29).
1. Press VIDEO key (Figure 4), video output mode will be changed 9. Operate step 6 to 11 on page 13 for saving the game configuration
as below: setting (Figure 33).
VGA NTSC PAL SEGA VGA

(Figure 4)
2. Switch OFF bit 4 of SW2. (Figure 37) (Figure 38)

GAME LIST HIDE/SHOW

1. Switch ON bit 4 of SW2 (Figure 3).

(Figure 39) (Figure 40)

Type 3: Special setting mode (Example: NAMCO SYSTEM 1 serial
etc).
(Figure 5) 1. Switch ON bit 4 of SW2 (Figure 3).
-6- - 15 -
 twice to save modified configurations (Figure 33). 2. Keep system working at game list (Figure 5).
9. Select “Back to Main Menu” (Figure 32) and press 1P START 3. Press SETUP key (Figure 6) to entry “System Setting” menu
button to back to “System Setting” (Figure 31). (Figure 7).
10. Select “Exit” (Figure 31) and press 1P START button to back to
game list (Figure 34).
3&4P CONNECTOR BOARD
11. Switch OFF bit 4 of SW2.

(Figure 6)
4. Select “Game List Setting” item by 1P joystick (Figure 7) and press
1P START button to entry “Game List Setting” menu (Figure 8).

(Figure 33) (Figure 34)

Type 2: Original setting is DIP SW setting mode. (Example:
CAPCOM CPS1 serial etc).
1. Switch ON bit 4 of SW2 (Figure 3).
2. Select the game that will be set (Ex. Street fighter II’) and start the
game (Figure 35). (Figure 7) (Figure 8)
5. Select “Show/Hide Game list” item by 1P joystick (Figure 8).

(Figure 35) (Figure 36)

3. Press ADJ2 key (Figure 28) and select “Dip Switches” by 1P (Figure 9) (Figure 10)
joystick (Figure 36). 6. Press 1P START button to entry “Show/Hide Game List” menu
4. Press 1P START button to entry configuration setting menu (Figure 9).
- 14 - -7-
7. Select game list item by 1P joystick and press 1P START button to 5. Some of games will appears the dialog window (Figure 30) after
decide show or hide. Dark square means show and light square press ESC key (Figure 28), please select “Quit Game” item by 1P
stands for hide. After finish all game lists Show or Hide setting, joystick and press 1P START button to back to game list (Figure
select “Exit” (Figure 9) and press 1P START button to back to 29).
“Game List Setting” menu (Figure 10).

(Figure 11) (Figure 12) (Figure 29) (Figure 30)

* SAVE MODIFIED GAME LIST* *SAVE MODIFIED GAME CONFIGURATION
8. Select “Save Current Game List” item (Figure 10) and press 1P SETTING*
START button twice to save game list (Figure 11). 6. Press SETUP key (Figure 28) to entry “System Setting” mode
9. Select “Back to Main Menu” (Figure 12) and press 1P START (Figure 31).
button to back to “System Setting” menu (Figure 13). 7. Select “Config Files” item (Figure 31) and press 1P START key to
entry “Config Files” menu (Figure 32).

(Figure 13) (Figure 14)

10. Select “Exit” (Figure 13) and press 1P START button to back to
game list (Figure 14). (Figure 31) (Figure 32)
11. Switch OFF bit 4 of SW2. 8. Select “Save Configuration” item (Figure 32) and press 1P START

-8- - 13 -
NEW GAMES UPDATE: Note:
About new game update information please ask to vender. We’ll 1. Working list can’t be hided.
2. “Restore Game List” (Figure 12) means to get back the older game
deliver new games and tools to all of our venders when new games
list.
announce. 3. “Restore Default Game List” (Figure 12) means to retrieve to
GAME CONFIGURATION SETTING: factory game list setting.
Type 1: Original setting is on screen setting mode. ONE GAME BUSINESS MODE:
(Example: SNK NEO GEO, CAPCOM CPSII serial etc). 1. Select a favorite game and entry to game mode.
2. Switch on SW2 bit 3 (Figure 15).
1. Switch ON bit 4 of SW2 (Figure 3).
3. “Escape to game menu” function will be disabled.
2. Select the game that will be set (Ex. Metal Slug 3) and start the
game (Figure 26).

(Figure 15)
(Figure 26) (Figure 27) DELETE GAME FROM GAME LIST
3. Press ADJ1 key (Figure 28) to entry the game original setting 1. Switch ON bit 4 of SW2 (Figure 3).
mode (Figure 27). 2. Select the game name that will be deleted at game list (Figure 16)
and press DEL key (Figure 18). The game will disappear from game
list (Figure 17).

3&4P CONNECTOR BOARD

(Figure 28)
4. After finished the game setting and exited to the game mode
(Figure 26), press ESC key (Figure 28) to back to game list (Figure
.
29).
(Figure 16) (Figure 17)
- 12 - -9-
 (Figure 18)
2. Press SETUP key (Figure 6) to entry “System Setting” menu
(Figure 7). (Figure 20) (Figure 21)
3. Select “Game List Setting” item (Figure 7) and press 1P SART
button to entry “Game List Setting” menu (Figure 10).
4. Execute step 6 to 9 operations on page 8.
ADD GAMES FROM ALL GAME LIST TO ONE OF GAME
LISTS
1. Switch ON bit 4 of SW2 (Figure 3).
2. Press LIST key (Figure 19) to entry game lists menu (Figure 20).
3. Select “All Games” and press 1P START button to entry “All”
game list (Figure 21). (Figure 22) (Figure 23)
4. Select a favorite game (Figure 21) and press “ADD” key (Figure LANGUAGE SETTING:
19) to entry game lists menu (Figure 22). 1. Switch ON bit 4 of SW2 (Figure 3).
5. Select a destination game list and press 1P START button (Figure 2. Press SETUP key (Figure 6) and select “Language Setting” item
22). The game will be added to the game list (Figure 23). (Figure 24).
6. Press SETUP key (Figure 6) to entry “System Setting” menu 3. Press 1P START button to change language from English to simple
Chinese or simple Chinese to English (Figure 24,Figure 25).
(Figure 7).
4. Switch OFF bit 4 of SW2.
7. Select “Game List Setting” item (Figure 7) and press 1P SART
button to entry “Game List Setting” menu (Figure 10).
8. Execute step 6 to 9 operations on page 8.

(Figure 19) (Figure 24) (Figure 25)

- 10 - - 11 -