NELES® TRUNNION MOUNTED

BALL VALVE – SERIES D

Metso's Neles series D is a trunnion mounted ball
valve for demanding on/off and control
applications. Valve series incorporates Metso's
several decade experience of metal-to-metal seat
technology, application based seat selection and
overall robust construction.
Equipped with Metso B1 series actuator and
VG9000 intelligent safety solenoid the valve
assembly delivers high availability in demanding
safety valve applications upto SIL 3.
For control applications valves can be equipped
with top of the line rotary valve noise attenuation
trim options - including the new Q2 trim for gas
applications.
Valves are well suited in various of oil and gas,
refining, petrochemical and chemical industries-
conforming to today's demanding requires of safety
and emissions.

APPLICATIONS Trunnion mounted

□ ESD / ESV service (upto SIL 3) □ Good controllability
□ HIPPS □ Low friction and operating torque
□ De-pressurizing and blow down service □ Large low friction bearings for long cycle life
□ Low noise and anti-cavitation
□ Cryogenic service
Metal seats
□ High temperature service □ Spring loaded seats for continuous contact with ball
□ High cycle and switching service □ Durable tightness with extensive selection of hard fac-
□ Oxygen construction for gaseous oxygen service ings for different applications and fluids
□ Molecular sieves □ Two way tight with double seated design
□ Solids handling □ Double Block and Bleed seat design
□ Chemical and petrochemical plants
□ Oil and gas production
Control service
□ Steam □ Excellent control characteristics
□ Natural gas, LNG, LPG □ Equal percentage inherent characteristic
□ Power plant □ Full ball and two throttling stages reduces cavitation
and noise
DESIGN FEATURES □ Self flushing low noise anti-cavitation Q-trim.
□ High noise reduction Q2-trim for gas applications
Size range □ High rangeability
□ NPS 02” – 36” (DN 50 – 900)
ESD service
Pressure classes □ D series valves are certified to be used safety systems
□ ASME Class 150, 300 and 600 up to and including SIL 3.
□ Full ESD package from single source supplier; valve,
Body design actuator and automated PST device VG9000 series. All
□ Full bore and reduced bore components are certified to be used up to SIL 3.
□ Possibility of on-line condition monitoring and diag-
Stemball nostics of safety valve assembly
□ Ball and stem of one piece □ Valve design makes it suitable for solids and fiberous
□ No-dead band , no hysteresis in throttling service
1 D 21 EN • 9/2017

fluids
□ Reliable operation and excellent response even with
high differential pressure
 METSO 1 D 21 EN

EXPLODED VIEWS AND LISTS OF PARTS

D2 62 7 63 64
16 15
17 11 S and T seat
12 62130 129 7 63 64

77
D and R seat
129 7
2

C seat
62 7
5 61

D2 PTFE H seat
65
bearings 75 76 62 78 7 64 63
3
D2 metal
bearings 10 E seat
Seat options
5 89 60 4

66 8

69 9b 42 9a

4
19 150 14 18
1
16 15
13 17

Item Part description Material

1 Body half (female) Stainless steel, ASTM A 351 gr. CF8M Carbon steel, ASTM A 216 gr. WCB
2 Body half (male) Stainless steel, ASTM A 351 gr. CF8M Carbon steel, ASTM A 216 gr. WCB
3 Ball Stainless steel, ASTM A 351 gr. CF8M + Hard chrome
4 Trunnion bearing Stainless steel, AISI 316 (Cobalt based alloy bushing in high temperature construction)
5 Trunnion bearing Stainless steel, AISI 316 (Cobalt based alloy bushing in high temperature construction)
7 Ball seat Stainless steel, AISI 316 + Cobalt based alloy
8 Bonnet Stainless steel, ASTM A 351 gr. CF8M Carbon steel, ASTM A 216 gr. WCB
9a Gland Stainless steel, ASTM A 351 gr. CF8M
9b Compression sleeve Stainless steel, ASTM A 351 gr. CF8M
10 Key Stainless steel, AISI 329
11 Stud ASTM A 193 gr. B8M ASTM A 320 gr. L7M
12 Stud ASTM A 193 gr. B8M ASTM A 320 gr. L7M
13 Stud ASTM A 193 gr. B8M ASTM A 320 gr. L7M
14 Stud ASTM A 193 gr. B8M ASTM A 320 gr. L7M
15 Hexagon nut ASTM A 194 gr. 8M ASTM A 194 gr. 2HM
16 Hexagon nut ASTM A 194 gr. 8M ASTM A 194 gr. 2HM
17 Hexagon nut ASTM A 194 gr. 8M ASTM A 194 gr. 2HM
18 Hexagon nut ASTM A 194 gr. 8M ASTM A 194 gr. 2HM
19 Identification plate Stainless steel, AISI 304
42 Retainer ring ASTM A 479 gr. XM-19
60* Bearing strip PTFE on stainless steel net, standard construction
61* Bearing strip PTFE on stainless steel net, standard construction
62 Spring Special alloy UNS N07750, in standard construction / gr. 660 / F6NM in high temperature construction
63 O-ring Viton GF
64 Back-up ring Polytetrafluoroethylene (PTFE)
65 Seal strip Graphite
66 Sheet ring Graphite
69 Packing ring Graphite + PTFE
75 O-ring Viton GF
76 Back-up ring PTFE
77 Hexagon plug Stainless steel, AISI 316
78 Spring pin Stainless steel
89* Thrust bearing PTFE on stainless steel net
129 Back seal Graphite
130 Set ring Stainless steel, AISI 316
150 Disc spring set EN10088-1.8159 + ENP
Note: * Only in PTFE bearing construction.

2 TECHNICAL BULLETIN 9/17

1 D 21 EN NELES® TRUNNION MOUNTED BALL VALVE – SERIES D

D1F 62 7 63 64
16 15
17 11 S and T seat
12 62130 129 7 63 64

77
D and R seat
129 7
2

C seat
62 7
5 61 89
D1F PTFE H seat
65
bearings 75 76 62 78 7 64 63
3
D1F metal
bearings 10 E seat

5 Seat options
89 60 4

66 8

69 9b 42 9a

4
19 150 14 18
1
16 15 13 17

Item Part description Material

1 Body half (female) Stainless steel, ASTM A 351 gr. CF8M Carbon steel, ASTM A 216 gr. WCB
2 Body half (male) Stainless steel, ASTM A 351 gr. CF8M Carbon steel, ASTM A 216 gr. WCB
3 Ball Stainless steel, ASTM A 351 gr. CF8M + Hard chrome
4 Trunnion bearing Stainless steel, AISI 316 (Cobalt based alloy bushing in high temperature construction)
5 Trunnion bearing Stainless steel, AISI 316 (Cobalt based alloy bushing in high temperature construction)
7 Ball seat Stainless steel, AISI 316 + Cobalt based alloy
8 Bonnet Stainless steel, ASTM A 351 gr. CF8M Carbon steel, ASTM A 216 gr. WCB
9a Gland Stainless steel, ASTM A 351 gr. CF8M
9b Compression sleeve Stainless steel, ASTM A 351 gr. CF8M
10 Key Stainless steel, AISI 329
11 Stud ASTM A 193 gr. B8M ASTM A 320 gr. L7M
12 Stud ASTM A 193 gr. B8M ASTM A 320 gr. L7M
13 Stud ASTM A 193 gr. B8M ASTM A 320 gr. L7M
14 Stud ASTM A 193 gr. B8M ASTM A 320 gr. L7M
15 Hexagon nut ASTM A 194 gr. 8M ASTM A 194 gr. 2HM
16 Hexagon nut ASTM A 194 gr. 8M ASTM A 194 gr. 2HM
17 Hexagon nut ASTM A 194 gr. 8M ASTM A 194 gr. 2HM
18 Hexagon nut ASTM A 194 gr. 8M ASTM A 194 gr. 2HM
19 Identification plate Stainless steel, AISI 304
42 Retainer ring ASTM A 479 gr. XM-19
60* Bearing strip PTFE on stainless steel net, standard construction
61* Bearing strip PTFE on stainless steel net, standard construction
62 Spring Special alloy UNS N07750, in standard construction / gr. 660 / F6NM in high temperature construction
63 O-ring Viton GF
64 Back-up ring Polytetrafluoroethylene (PTFE)
65 Seal strip Graphite
66 Sheet ring Graphite
69 Packing ring Graphite + PTFE
75 O-ring Viton GF
76 Back-up ring PTFE
77 Hexagon plug Stainless steel, AISI 316
78 Spring pin Stainless steel
89* Thrust bearing PTFE on stainless steel net
129 Back seal Graphite
130 Set ring Stainless steel, AISI 316
150 Disc spring set EN10088-1.8159 + ENP
Note: * Only in PTFE bearing construction.

TECHNICAL BULLETIN 9/17 3

 METSO 1 D 21 EN

TECHNICAL SPECIFICATION
Product type Bolting
Full or reduced bore, trunnion mounted ball valve. B8M/8M with stainless steel body.
Ball and stem are integrally cast. L7M/2H or 2MH with carbon steel body.
Split body design.
Standard options
Flanged. Cryogenic design.
Pressure ratings Bonnet extension.
ASME Class 150, 300 and 600. Oxygen construction for gaseous oxygen service.
High temperature design.
Size range, full bore
DN 300 … 900 / 12" - 36" in ASME Class 150. Carbide hard facing or NiBo ball coating.
DN 100 … 900 / 4" - 36" in ASME Class 300. Noise/cavitation reduction ball insert; Q-trim design.
DN 50 … 600 / 2" - 28" in ASME Class 600. Fire safety API 607 (on selected seat designs).
NACE MR-01-03 or MR-01-75.
Size range, reduced bore
DN 250 ... 600 / 10" - 24" in ASME Class 150. Material and test certification
DN 200 ... 600 / 8" - 24" in ASME Class 300. EN 10204-3.1 material certificates for body, ball and bonnet.
DN 80 ... 600 / 3" - 24" in ASME Class 600. Valve tightness
Larger sizes on request. ANSI/FCI 70-2 class V for metal seats.
ANSI/FCI 70-2 class VI for soft seats, for selected metal seats
Temperature range
-200 … +450 °C (+600 °C) ISO 5208 rate C or D for metal seats.
-330 … +840 °F (+1100 °F). ISO 5208 rate B for soft seats.
Other tigthness rates upon request.
Design standards
Valve body ASME B16.34. Maximum allowable differential pressure curves
Valve body joint ASME VIII. DIV. 1 APPX 2.
Valve flanges ASME B16.5.
Face-to-face ASME B16.10.
Standard materials
Body ASTM A351 gr. CF8M.
ASTM A216 gr. WCB.
Ball ASTM A351 gr. CF8M + hard chrome or
other special coating with metal seats.
Bearings SS 316 + PTFE net or Cobalt based alloy
Seats AISI 316 + Cobalt based alloy.
AISI 316 + PTFE insert.
Seals/gaskets PTFE, graphite.
Standard bearing construction
Large, low friction bearings.
SS 316 + PTFE net or Cobalt based alloy.

Emissions
ISO 15848-1 type approved and certified

STANDARD SEAT SELECTION FOR D SERIES VALVES

Soft seat design, seat code T Fire safe soft seat design, seat code D

Size range: DN 50 … 900 / 2" … 36" Size range: DN 50 … 900 / 2" … 36"
Seat material: AISI 316 + PTFE + C25 % insert Seat material: AISI 316 + PTFE + C25 % insert
O-ring: Viton GF Seat seal : Viton GF / graphite
Spring: UNS N07750 Spring: UNS N07750
Temperature range: -30 … +200 °C / -22 … +390 °F. Temperature range: -30 … +200 °C / -22 … +390 °F.
The standard PTFE-seated design is most suitable for shut-off service, The fire safe PTFE-seated design is most suitable for shut-off service,
for temperatures up to +200 °C/+390 °F and when pressure drop is for temperatures up to +200 °C/+390 °F and when pressure drop is
relatively low and medium does not contain wearing particles. relatively low and medium does not contain wearing particles.
4 TECHNICAL BULLETIN 9/17
1 D 21 EN NELES® TRUNNION MOUNTED BALL VALVE – SERIES D

Control metal seat design, seat code E Fire safe on-off metal seated design, seat code R

Size range: DN 50 … 900 / 2" … 36" Size range: DN 50 … 900 / 2" … 36"
Seat material: AISI 316 + Cobalt based alloy. Seat material: AISI 316 + Cobalt based alloy.
O-ring: Viton GF Seat seal : Viton GF / graphite
Spring: UNS N07750 Spring: UNS N07750
Temperature range: -30 … +200 °C / -22 … +390 °F. Temperature range: -30 … +200 °C / -22 … +390 °F.
The control metal seat features the ejector seat principle providing The fire safe metal seat is most suitable for high pressure drop
non-contact in control service. applications and for fluids containing impurities.
This seat design is intended for demanding control applications.

Low and high temperature on-off and High temperature solids proof metal seat, seat code K
control metal seat, seat code C

Size range: DN 50 … 600 / 2" … 24" Ball seat: Stainless steel + hard facing.
Seat seal: Graphite Seat seal: Graphite/graphite
Bellows seat material: gr. 660/F6NM + hard facing Spring: INCONEL® 625.
Temperature range: -200 … +400 °C (+600 °C) / Temp. range: -50 ... 450 °C / -60 ... +840 °F.
-330 … +750 °F (+1110 °F).
The Cobalt based alloy seat is preloaded with a bellows ring made of
special stainless steel. The bellows acts as a spring and seal, and also
increases the seat pressure at higher pressure differentials. Designed
for demanding applications containing impurities. Alternative bel-
lows spring materials are available for temperatures up to +600 °C/
+1110 °F. The bellows seat design is the choice for cryogenic service.

Metal seated design, seat code S

Size range: DN 50 … 900 / 2" … 36"

Seat material: AISI 316 + Cobalt based alloy.
O-ring: Viton GF
Spring: UNS N07750
Temperature range: -30 … +200 °C / -22 … +390 °F.
The metal seat is most suitable for high pressure drop applications
and for fluids containing impurities.

TECHNICAL BULLETIN 9/17 5

 METSO 1 D 21 EN

DIMENSIONS AND WEIGHTS

D2C, ASME CLASS 150 D1F ASME CLASS 600

D2D, ASME CLASS 300
Key acc. to ØO
ØO
M ANSI B17.1 UL S M P
Dimensions of mounting P
level acc. to ISO 5211
N N
UNC
W L H
R

E E
K
T K

(ØD) DN ØD DN

PLUG PLUG
ØB
A1 ØB A
A

D2C, ASME CLASS 150

Dimensions, mm Plug
Type Cv 90° ζ 90° Mounting face kg
DN A ØB ØD E K M N ØO P NPTF
D2C 12 300 610 596 304 756 600 22.22 156 95 104.8 22400 0.04 F16, F25, F30 1 420
D2C 14 350 686 668 337 818 662 22.22 156 95/105 104.8 28300 0.04 F16, F25, F30 1 550
D2C 16 400 762 744 387 840 684 22.22 156 95/120 104.8 37700 0.04 F16, F25, F30 1 720
D2C 18 450 864 814 440 890 734 22.22 156 95/120 104.8 48000 0.03 F16, F25, F30 1 1300
D2C 20 500 914 904 490 969 789 25.40 180 95/105 116.1 59500 0.03 F16, F25, F30, F35 1 1500
D2C 24 600 1067 1084 590 1128 923 31.75 205 95/120 133.8 86300 0.03 F25, F30, F35, F40 1 2300
D2C 28 700 1244 1245 692 1263 1038 31.75 225 105/135 149 118000 0.03 F30, F35, F40 1 3800
D2C 30 750 1295 1318 740 1485 1235 38.10 250 150 166.6 136000 0.03 F30, F35, F40 1 4400
D2C 36 900 1524 1560 880 1661 1381 38.10 280 165 181.8 192000 0.03 F40, F48 1 6500

Dimensions, inch Plug

Type Cv 90° ζ 90° Mounting face lb
Size A ØB ØD E K M N ØO P NPTF
D2C 12 12 24.02 23.46 11.97 29.76 23.62 0.87 6.14 3.74 4.13 22400 0.04 F16, F25, F30 1 924
D2C 14 14 27.01 26.30 13.27 32.20 26.06 0.87 6.14 3.74/4.13 4.13 28300 0.04 F16, F25, F30 1 1210
D2C 16 16 30.00 29.29 15.24 33.07 26.93 0.87 6.14 3.74/4.72 4.13 37700 0.04 F16, F25, F30 1 1584
D2C 18 18 34.02 32.05 17.32 35.04 28.90 0.87 6.14 3.74/4.72 4.13 48000 0.03 F16, F25, F30 1 2860
D2C 20 20 35.98 35.59 19.29 38.15 31.06 1.00 7.09 3.74/4.13 4.57 59500 0.03 F16, F25, F30, F35 1 3300
D2C 24 24 42.01 42.68 23.23 44.41 36.34 1.25 8.07 3.74/4.72 5.27 86300 0.03 F25, F30, F35, F40 1 5060
D2C 28 28 48.98 49.02 27.24 49.72 40.87 1.25 8.86 4.13/5.31 5.87 118000 0.03 F30, F35, F40 1 8360
D2C 30 30 50.98 51.89 29.13 58.46 48.62 1.50 9.84 5.91 6.56 136000 0.03 F30, F35, F40 1 9680
D2C 36 36 60.00 61.42 34.65 65.39 54.37 1.50 11.02 6.50 7.16 192000 0.03 F40, F48 1 14300
Valve-actuator assembly dimensions:
See K-dimension from drawing, mounting face from table and actuator dimensions from related actuator bulletin.

6 TECHNICAL BULLETIN 9/17

1 D 21 EN NELES® TRUNNION MOUNTED BALL VALVE – SERIES D

D2D, ASME CLASS 300

Dimensions, mm Plug
Type Cv 90° ζ 90° Mounting face kg
DN A ØB ØD E K M N ØO P NPTF
D2D 04 100 305 262 100 373 305 9.52 68 40 44.2 2120 0.05 F10, F12, F14 1/2 60
D2D 06 150 403 368 152 480 390 12.70 90 55 60.6 5100 0.05 F12, F14, F16 3/4 140
D2D 08 200 502 454 202 575 456 19.05 119 70 78.2 9300 0.04 F14, F16, F25 3/4 240
D2D 10 250 568 558 254 684.5 538.5 22.22 146 85 94.6 15200 0.04 F16, F25, F30 1 380
D2D 12 300 648 630 304 756 600 22.22 156 95 104.8 22400 0.04 F16, F25, F30, F35 1 590
D2D 14 350 762 706 337 818 638 25.40 180 105 116.2 28300 0.04 F25, F30, F35 1 770
D2D 16 400 838 792 387 910.5 705.5 31.75 205 120 133.8 37700 0.04 F25, F30, F35 1 1050
D2D 18 450 914 884 440 1005 849 22.22 156 95 104.8 48000 0.03 F25, F30, F35 1 1250
D2D 20 500 991 966 490 1085 905 25.40 180 105 116.2 59500 0.03 F25, F30, F35, F40 1 1950
D2D 24 600 1143 1130 590 1229 1024 31.75 205 120 133.8 86300 0.03 F30, F35,F40 1 3100
D2D 28 700 1346 1340 690 1323 1098 31.75 225 135 149 118000 0.03 F35,F40 1 5250
D2D 30 750 1397 1414 740 1485 1235 38.10 250 150 166.6 136000 0.03 F35, F40, F48 1 5500
D2D 32 800 1524 1490 785 1521 1271 38.10 250 150 166.6 151000 0.03 F35, F40 1 6700
D2D 36 900 1727 1684 880 1720 1440 38.10 280 165 181.8 192000 0.03 F40, F48 1 8700

Dimensions, inch Plug

Type Cv 90° ζ 90° Mounting face lb
Size A ØB ØD E K M N ØO P NPTF
D2D 4 4 12.01 10.31 3.94 14.69 12.01 0.37 2.68 1.57 1.74 2120 0.05 F10, F12, F14 1/2 132
D2D 6 6 15.87 14.49 5.98 18.90 15.35 0.50 3.54 2.17 2.39 5100 0.05 F12, F14, F16 3/4 308
D2D 8 8 19.76 17.87 7.95 22.64 17.95 0.75 4.69 2.76 3.08 9300 0.04 F14, F16, F25 3/4 528
D2D 10 10 22.36 21.97 10.00 26.95 21.20 0.87 5.75 3.35 3.72 15200 0.04 F16, F25, F30 1 836
D2D 12 12 25.51 24.80 11.97 29.76 23.62 0.87 6.14 3.74 4.13 22400 0.04 F16, F25, F30, F35 1 1298
D2D 14 14 30.00 27.80 13.27 32.20 25.12 1.00 7.09 4.13 4.57 28300 0.04 F25, F30, F35 1 1694
D2D 16 16 32.99 31.18 15.24 35.85 27.78 1.25 8.07 4.72 5.27 37700 0.04 F25, F30, F35 1 2310
D2D 18 18 35.98 34.80 17.32 39.57 33.43 0.87 6.14 3.74 4.13 48000 0.03 F25, F30, F35 1 2750
D2D 20 20 39.02 38.03 19.29 42.72 35.63 1.00 7.09 4.13 4.57 59500 0.03 F25, F30, F35, F40 1 4290
D2D 24 24 45.00 44.49 23.23 48.39 40.31 1.25 8.07 4.72 5.27 86300 0.03 F30, F35,F40 1 6820
D2D 28 28 52.99 52.76 27.17 52.09 43.23 1.25 8.86 5.31 5.87 118000 0.03 F35,F40 1 11550
D2D 30 30 55.00 55.67 29.13 58.46 48.62 1.50 9.84 5.91 6.56 136000 0.03 F35, F40, F48 1 12100
D2D 32 32 60.00 58.66 30.90 59.88 50.04 1.50 9.84 5.91 6.56 151000 0.03 F35, F40 1 14740
D2D 36 36 68.00 66.30 34.65 67.72 56.69 1.50 11.02 6.50 7.16 192000 0.03 F40, F48 1 19140

D1F, ASME CLASS 600

Dimensions, mm Mounting face Plug
Type Cv 90° ζ 90° kg
DN A ØB ØD E K M N ØO P NPTF
D1F 02 50 292 206 50 305 300 6.35 46 25 27.8 480 0.06 F07, F10, F12, F14 1/2 35
D1F 03 80 356 262 77 375 340 9.52 58 35 39.1 1200 0.05 F12, F14, F16 1/2 60
D1F 04 100 432 314 100 427 387 9.52 68 40 44.2 2120 0.05 F14, F16, F25 1/2 120
D1F 06 150 559 404 152 540 485 12.70 90 55 60.6 5100 0.05 F14, F16,F25, F30 3/4 280
D1F 08 200 660 507 202 645 575 19.05 119 70 78.2 9300 0.04 F14, F16,F25, F30 3/4 380
D1F 10 250 787 610 254 765 680 22.22 146 85 94.6 15200 0.04 F16, F25,F30, F35 1 690
D1F 12 300 838 748 302 890 795 22.22 156 95 104.8 22400 0.04 F25, F30, F35, F40 1 1134
D1F 14 350 889 824 340 970 865 25.40 180 105 116.1 28300 0.04 F25, F30, F35, F40 1 1500
D1F 16 400 991 954 390 1068 948 31.75 205 120 133.8 37700 0.04 F30, F35, F40 1 2500
D1F 18 450 1092 1090 440 1200 1065 31.75 225 135 149.0 48000 0.03 F30, F35, F40 1 3300
D1F 20 500 1194 1176 490 1355 1205 38.10 250 150 166.6 59500 0.03 F35, F40, F48 1 3880
D1F 24 600 1397 1224 591 1440 1275 38.10 280 165 181.8 86300 0.03 F35, F40, F48 1 6500

Dimensions, inch Mounting face Plug

Type Cv 90° ζ 90° lb
Size A ØB ØD E K M N ØO P NPTF
D1F 2 2 11.50 8.11 1.97 12.01 11.81 0.25 1.81 0.98 1.09 480 0.06 F07, F10, F12, F14 1/2 77
D1F 3 3 14.02 10.31 3.03 14.76 13.39 0.37 2.28 1.38 1.54 1200 0.05 F12, F14, F16 1/2 132
D1F 4 4 17.01 12.36 3.94 16.81 15.24 0.37 2.68 1.57 1.74 2120 0.05 F14, F16, F25 1/2 264
D1F 6 6 22.01 15.91 5.98 21.26 19.09 0.50 3.54 2.17 2.39 5100 0.05 F14, F16,F25, F30 3/4 616
D1F 8 8 25.98 19.96 7.95 25.39 22.64 0.75 4.69 2.76 3.08 9300 0.04 F14, F16,F25, F30 3/4 836
D1F 10 10 30.98 24.02 10.00 30.12 26.77 0.87 5.75 3.35 3.72 15200 0.04 F16, F25,F30, F35 1 1518
D1F 12 12 32.99 29.45 11.89 35.04 31.30 0.87 6.14 3.74 4.13 22400 0.04 F25, F30, F35, F40 1 2495
D1F 14 14 35.00 32.44 13.39 38.19 34.06 1.00 7.09 4.13 4.57 28300 0.04 F25, F30, F35, F40 1 3300
D1F 16 16 39.02 37.56 15.35 42.05 37.32 1.25 8.07 4.72 5.27 37700 0.04 F30, F35, F40 1 5500
D1F 18 18 42.99 42.91 17.32 47.24 41.93 1.25 8.86 5.31 5.87 48000 0.03 F30, F35, F40 1 7260
D1F 20 20 47.01 46.30 19.29 53.35 47.44 1.50 9.84 5.91 6.56 59500 0.03 F35, F40, F48 1 8536
D1F 24 24 55.00 48.19 23.27 56.69 50.20 1.50 11.02 6.50 7.16 86300 0.03 F35, F40, F48 1 14300
Valve-actuator assembly dimensions:
See K-dimension from drawing, mounting face from table and actuator dimensions from related actuator bulletin.

TECHNICAL BULLETIN 9/17 7

 METSO 1 D 21 EN

VALVE + B1C/B1J/B1JA

NPT
X
DN
G
NPT F

V K J
¯ØB

B1C ACTUATOR
DIMENSIONS, mm DIMENSIONS, inch
Actuator NPT kg Actuator NPT lbs
F G J V X F G J V X
B1C6 400 260 283 36 90 1/4 4.2 B1C6 15.75 10.24 11.14 1.42 3.54 1/4 9
B1C9 455 315 279 43 110 1/4 9.6 B1C9 17.91 12.40 10.98 1.69 4.33 1/4 21
B1C11 540 375 290 51 135 3/8 16 B1C11 21.26 14.76 11.42 2.01 5.31 3/8 35
B1C13 635 445 316 65 175 3/8 31 B1C13 25.00 17.52 12.44 2.56 6.89 3/8 68
B1C17 770 545 351 78 215 1/2 54 B1C17 30.31 21.46 13.82 3.07 8.46 1/2 119
B1C20 840 575 385 97 215 1/2 73 B1C20 33.07 22.64 15.16 3.82 8.46 1/2 161
B1C25 1040 710 448 121 265 1/2 131 B1C25 40.94 27.95 17.64 4.76 10.43 1/2 289
B1C32 1330 910 525 153 395 3/4 256 B1C32 52.36 35.83 20.67 6.02 15.55 3/4 564
B1C40 1660 1150 595 194 505 3/4 446 B1C40 65.35 45.28 23.43 7.64 19.88 3/4 983
B1C50 1970 1350 690 242 610 1 830 B1C50 77.56 53.15 27.17 9.53 24.02 1 1829

B1J/B1JA ACTUATOR
DIMENSIONS, mm DIMENSIONS, inch
Actuator NPT kg Actuator NPT lbs
F G J V X F G J V X
B1J/B1JA6 485 368 273 36 110 3/8 8 B1J/B1JA6 19.09 14,49 10.75 1.42 4.33 3/8 20
B1J/B1JA8 560 420 279 43 135 3/8 17 B1J/B1JA8 22.05 16.54 10.98 1.69 5.31 3/8 37
B1J/B1JA10 650 490 290 51 175 3/8 30 B1J/B1JA10 25.59 19.29 11.42 2.01 6.89 3/8 66
B1J/B1JA12 800 620 316 65 215 1/2 57 B1J/B1JA12 31.50 24.41 12.44 2.56 8.46 1/2 126
B1J/B1JA16 990 760 351 78 265 1/2 100 B1J/B1JA16 38.98 29.92 13.82 3.07 10.43 1/2 220
B1J/B1JA20 1200 935 358 97 395 3/4 175 B1J/B1JA20 47.24 36.81 14.09 3.82 15.55 3/4 386
B1J/B1JA25 1530 1200 448 121 505 3/4 350 B1J/B1JA25 60.24 47.24 17.64 4.76 19.88 3/4 771
B1J/B1JA32 1830 1410 525 153 540 1 671 B1J/B1JA32 72.05 55.51 20.67 6.02 21.26 1 1479
B1J/B1JA40 2095 1578 580 194 724 1 1100 B1J/B1JA40 82.48 62.13 22.8 7.64 28.5 1 2424

8 TECHNICAL BULLETIN 9/17

1 D 21 EN NELES® TRUNNION MOUNTED BALL VALVE – SERIES D

HOW TO ORDER

Q 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
- D1 F E 06 D A E 02 G / - P

Q Q-CODE PRODUCT OPTIONS 7. SEAT TYPE

Standard low noise trim for gas and liquid application, single seated T Soft seat
Q (const. E or B) with open down stream side ball sur face D Soft seat, fire safe
Q2G Q2-trim for gas application (single seated const. E or B) S Metal seat
Q-CODE SPECIAL PRODUCT OPTIONS E Metal seat
Standard low noise trim for gas and liquid application, double seated C Bellows seat
Q
(construction A or H), ball with solid two sealing surfaces K Solids proof metal seat
QLM Partial baffle inside the ball for increased cavitation resistance. R Fire safe metal seat
Q2GH Q2-trim for gas application, high capacity (single seated const. E or B)
8. STANDARD MATERIAL
1. SERIES Body Wound spring or
Seat seal Gland packing
D Center split body, trunnion mounted, bonnet gasket bellows spring
D2, D1(F) Full bore, flanged 02 Viton GF Graphite Graphite W X-750
D3 Full bore, weld ends 03
Graphite Graphite B W.no.1.4418
D4 Reduced bore, weld ends Graphite Graphite W X-750
D5 Reduced bore, flanged 18 Graphite Graphite Graphite B gr. 660/F6NM
NON-STANDARD MATERIALS
2. PRESSURE RATING Viton GF,
63 Graphite Graphite W X-750
graphite
C ASME class 150
D ASME class 300
9. PACKING CONSTRUCTION CODE
F ASME class 600
G Standard packing, live loaded graphite packing, ISO 15848-1 certified
3. CONSTRUCTION
10. FLANGE FACING
General construction, PTFE bearings, 2 seats,
A temperature range: -50 … +230 °C. ASME B16.5 raised face Ra 3.2-6.3 or
- EN 1092-1 Type B1 (Ra 3.2-12.5) up to PN 40,
Single seated, one-way tight, metal bearings, type B2 in PN 63, 100
B temperature range: -50 … +450/600 ºC
05 Ring Joint
Single seated, one-way tight, PTFE bearings,
E
temperature range: -50 … +230 °C
High-temperature construction, metal bearings, 2 seats, 11. FLANGE
H temperature range: -50 … +450/600 ºC - Acc. to valve pressure rating, without sign (standard)
Cryogenic construction, PTFE bearings, 2 seats, C ASME class 150***
C temperature range: -200 … +230 °C D ASME class 300***
Oxygen construction F ASME class 600***
BAM tested non-metallic materials J EN PN 10
- T = -50 … +200 °C
- Max pressure based on body rating K EN PN 16
Z
- Metal bearings, cobalt based alloy L EN PN 25
- 2 seats, seat type C, WC-Co coated ball and seats M EN PN 40
(other seat types shall be consulted with Product Center)
- Oxygen cleaning acc. to Metso internal procedure FC-QC-0001 N EN PN 63
P EN PN 100
Y Special construction
R JIS 10K
S JIS 16K
4. SIZE (in)
T JIS 20K
D1F 02, 03, 04, 06, 08, 10, 12, 14, 16, 18, 20, 24, 28
U JIS 30K
D2D 04, 06, 08, 10, 12, 14, 16, 18, 20, 24, 28*, 30*, 32*, 36*
W JIS 40K
D2C 10, 12, 14, 16, 18, 20, 24, 28*, 30*, 36*
Y Special
*) Flanges acc. to ASME B16.47 series A in sizes 26" or larger.
Flanges in sizes up to NPS 24" are acc. to ASME B 16.5. ***) Flange acc. to ASME B16.47 series A in sizes 26" or larger.
Flange in sizes up to NPS 24" are acc. to ASME B 16.5
5. BODY BOLTING
STANDARD MATERIALS
A CF8M B8M / 8M
D WCB L7M / 2HM
Y Special

6. BALL
A CF8M / AISI 316 + Chrome
D CF8M / AISI 316 + NiBo, only size ≤ 24
H CA6NM + Chrome
H3 CA6NM + CrC, general service up to + 425 °C
R3 CF8M / AISI 316 + CrC, high temperature
Y Special

TECHNICAL BULLETIN 9/17 9

 Subject to change without prior notice. Product names in this
Metso Corporation bulletin are all trademarks of Metso Flow Control Inc.
Töölönlahdenkatu 2, PO Box 1220, 00100 Helsinki, Finland
Tel. +358 20 484 100

Metso Flow Control Inc.

Vanha Porvoontie 229, P.O. Box 304, FI-01301 VANTAA, Finland.
Tel. +358 20 483 150. Fax +358 20 483 151

www.metso.com/valves