Scribd
Upload
59 views1 page

Z-N720 SW1218 Update Preparation and Installation Guide Web Revb

This document provides instructions for installing a software update that includes improvements and bugfixes for a navigation system. The update requires extracting files from a downloaded executable onto a FAT32 formatted USB drive and then inserting the drive into the navigation system to initiate the update process. The update takes approximately 3 minutes to complete and users should validate that the new software versions match what is listed to ensure full success of the update.

Uploaded by

yoga new
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
59 views1 page

Z-N720 SW1218 Update Preparation and Installation Guide Web Revb

This document provides instructions for installing a software update that includes improvements and bugfixes for a navigation system. The update requires extracting files from a downloaded executable onto a FAT32 formatted USB drive and then inserting the drive into the navigation system to initiate the update process. The update takes approximately 3 minutes to complete and users should validate that the new software versions match what is listed to ensure full success of the update.

Uploaded by

yoga new
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Improvments and bugfixes:

 Improved system stability


 New default system settings
 Correction of various media player application errors
 Implementation of new library for better “PI-SCAN”
 Playback will be pause during TA
 Reworked IR-protocol because fast for/- backwards via steering wheel remote control
 Improved split-screen logic
Split-Screen stays active, also when source switch is done.
 Additional improvements and software code streamlining

Requirements:
 USB stick of at least 4 GB data size.
Note: The USB stick must be formatted to FAT32 before use (right-click on the USB drive in the Win
Explorer  choose “Format”  select FAT 32  start).
 A Windows based PC or notebook to prepare the USB stick.

Installation of the software update:


1. Download the software update package „ Z-N720_SW20141218.exe”.
2. The software package is a self-unzipping executable. Start extraction with a doubleclick and select
your USB stick as target for the uncompressed files.
3. You obtain a folder called „ C9Plus_SW_Update “in the root directory of the USB stick.
4. Connect the USB stick to your naviceiver.
5. Enter the naviceiver setup. Tap on “MISC” ”Update” Software “OK”.
6. The naviceiver will restart and show the update dialog menu.
7. Make sure, checkboxes „1. APP“ and “7. MCU” are selected. If so, tap on the „Update“ button to start
the update process.
8. Your system will be updated in a step-by-step process. The complete update procedure takes approx.
3 minutes. A status bar shows the update progress.
9. The Naviceiver will restart automatically once the update process has completed successfully.
10. Calibrate the touch screen with a suitable pen.
11. Remove the USB stick.

Version checking:
After completion of the software update, version checking is crucial to validate full success. If the installed
software version differs with listed versions below, a full re-installation of the entire software update is
required.

Review of device software version:


To check the versions of Application and MCU, enter the Naviceiver setup. Tap on “MISC“  ”Info” 
Show Info Software “OK”

MCU: 0.2.9_03V3_141218
APP: 1.0.22_03V3_141125
(Only the version numbers stated are relevant)

Note:
 Do not operate or turn off while device is performing software update.
 After completion of the software update do load factory defaults.
[Setup  „Misc“  „Help“  „Load factory“  „OK“]

Page 1 of 1 AL

You might also like