Fileupload 1381940945
Fileupload 1381940945
APPLICATIONS
• Pressure boosting domestic plants
• Small-scale irrigation
• Moving non-aggressive liquids for civil and industrial use
• Washing plants
• Washing vehicles
TECHNICAL DETAILS
• Available with brass impeller (CMA 0.50 M GO, CMA 0.75 M GO,
CMA 1.00 M GO)
• The CMR version is equipped with an open impeller
CMA-B-C-D
• They can be inserted into machinery for industrial use
TECHNICAL DATA
• Maximum working pressure:
- 6 bar for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00 - 1.50 - 2.00 -
3.00, CMC 0.75 - 1.00, CMD 1.50 - 2.00 - 3.00 - 4.00, CMR 0.75 -
1.00
- 8 bar for CMA 1.50 - 2.00 - 3.00, CMB 4.00 - 5.50
CMR
• Maximum temperature of the liquid:
- 40°C for CMA 0.50 - 0.75 - 1.00
- 90°C for the rest of the range
• Self-ventilated 2 pole asynchronous motor
• Class of insulation F
CMA-B-C-D – CMR IDENTIFICATION CODE
• IP44 Protection rating
CMB 1.50 M • 230V ±10%, 50Hz single phase voltage,
M 230/400V ±10%, 50Hz three phase voltage
SINGLE PHASE
THREE PHASE T • Permanent capacitor inserted and thermo-amperometric protection
with automatic rearm incorporated for the single phase motor
0.50 • Protection under user's responsibility for the three phase version
0.75 • G1 suction connection for CMA 0.50 - 0.75 - 1.00,
0.80 G1¼ for CMA 1.50 - 2.00 - 3.00, G1½ for CMR, G2 for CMB - CMC,
1.00 G2½ for CMD
POWER [HP] • G1 discharge connection for CMA, G1¼ for CMB, G1½ for CMR,
1.50
2.00 G2 for CMC, G2½ for CMD
3.00
4.00 MATERIALS
5.50 • Cast iron pump body
• Mechanical seal in Carbon/Ceramic/NBR
CMA • Impeller:
MODEL CMB - in PPO reinforced with fibreglass for CMA 0.50 - 0.75 - 1.00
CMC - in brass for CMA 1.50 - 2.00 - 3.00, CMB 2.00 - 3.00 - 4.00 - 5.50,
CMD CMR 0.75 - 1.00
CMR - in cast iron for CMB 0.75 - 1.00 - 1.50, CMC, CMD
• Shaft:
ACCESSORIES (on request) - in AISI 303 for CMA 1.50 - 2.00 - 3.00, CMB 1.50 - 2.00 - 3.00,
• 5 litre 10 bar ¾ EPDM vessel CMD 1.50 - 2.00 - 3.00
• 24 litre 8 bar 1” EPDM vessel - in AISI 304 for CMB 4.00 - 5.50, CMD 4.00
• 24 litre 10 bar 1” EPDM vessel - in AISI 416 for CMA 0.50, CMR 0.75 - 1.00
• PVC 5m key float with counter-weight - in AISI 420 for CMA 0.75 - 1.00, CMB 0.75 - 1.00, CMC 0.75 - 1.00
• PVC 10m key float with counter-weight • Support:
• SQUARE-D FSG-2 1.4÷4.6 bar G¼ F pressure switch - in aluminium for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00,
• FYG-22 2.8÷7 bar G¼ F pressure switch CMC 0.75 - 1.00, CMR 0.75 - 1.00
• Presscomfort - Pressure regulator (see page 70) - in cast iron for the rest of the range
• Press•o•Matic - Variable speed control system
(230V±10% single phase - power supply three phase 220V output – CONTROL PANELS
maximum motor power 2.2 kW - 3 HP - see page 71) • 1EPBH (see page 68)
DIMENSIONS TABLE
Model Dimensions [mm] Weight
[1] [2] [2] [1]
A B C D E F H H1 H2 H3 H4 M M1 N N1 R T V W S DNA DNM [kg]
CMA 0.50 M 160 261,8 158,8 30 44 8 202 82 120 - 173 40 40 110 150 44 PG11 - 30 9,5 G1 G1 7,3
CMA 0.50 T 160 261,8 158,8 30 44 8 202 82 120 172,5 - 40 40 110 150 44 - PG11 30 9,5 G1 G1 7,3
CMA 0.75 M 185 300,3 171,8 36,8 45 9 232 97 135 - 198 45 40 140 180 45 PG11 - 36,8 9,5 G1 G1 11,7
CMA 0.75 T 185 300,3 171,8 36,8 45 9 232 97 135 197,5 - 45 40 140 180 45 - PG11 36,8 9,5 G1 G1 11,7
CMA 1.00 M 185 300,3 171,8 36,8 45 9 232 97 135 - 198 45 40 140 180 45 PG11 - 36,8 9,5 G1 G1 12,0
CMA 1.00 T 185 300,3 171,8 36,8 45 9 232 97 135 197,5 - 45 40 140 180 45 - PG11 36,8 9,5 G1 G1 12,0
CMA 1.50 M 200 347,3 208,3 41,8 45,5 9 252 100 152 - 232 50 40 155 194 45,5 PG13,5 - 41,8 9,5 G1¼ G1 19,4
CMA 1.50 T 200 347,3 208,3 41,8 45,5 9 252 100 152 214 - 50 40 155 194 45,5 - PG11 41,8 9,5 G1¼ G1 19,4
CMA 2.00 M 225 360,3 208,3 41,8 45,5 9 285 115 170 - 247 50 40 180 220 45,5 PG13,5 - 41,8 9,5 G1¼ G1 21,3
CMA 2.00 T 225 347,3 208,3 41,8 45,5 9 285 115 170 229 - 50 40 180 220 45,5 - PG11 41,8 9,5 G1¼ G1 21,3
CMA 3.00 T 225 360,3 208,3 41,8 45,5 9 285 115 170 229 - 50 40 180 220 45,5 - PG11 41,8 9,5 G1¼ G1 22,0
CMB 0.75 M 188 315,3 182,3 36,8 49,5 9 251,5 101,5 150 - 127,5 45 40 140 180 65,5 PG11 - 52,8 9,5 G2 G1¼ 12,5
CMB 0.75 T 188 315,3 182,3 36,8 49,5 9 251,5 101,5 150 127 - 45 40 140 180 65,5 - PG11 52,8 9,5 G2 G1¼ 12,5
CMB 1.00 M 188 315,3 182,3 36,8 49,5 9 251,5 101,5 150 - 127,5 45 40 140 180 65,5 PG11 - 52,8 9,5 G2 G1¼ 13,8
CMB 1.00 T 188 315,3 182,3 36,8 49,5 9 251,5 101,5 150 127 - 45 40 140 180 65,5 - PG11 52,8 9,5 G2 G1¼ 13,8
CMB 1.50 M 188 349,3 206,3 36,8 49,5 9 251,5 101,5 150 - 233,5 45 40 140 180 65,5 PG13,5 - 52,8 9,5 G2 G1¼ 20,5
CMB 1.50 T 188 349,3 206,3 36,8 49,5 9 251,5 101,5 150 215,5 - 45 40 140 180 65,5 - PG11 52,8 9,5 G2 G1¼ 20,5
CMB 2.00 M 200 373,3 209,3 36,8 57,5 9 271,5 111,5 160 - 243,5 45 40 160 200 76,5 PG13,5 - 55,8 9,5 G2 G1¼ 21,5
CMB 2.00 T 200 360,3 209,3 36,8 57,5 9 271,5 111,5 160 225,5 - 45 40 160 200 76,5 - PG11 55,8 9,5 G2 G1¼ 21,5
CMB 3.00 T 200 373,3 209,3 36,8 57,5 9 271,5 111,5 160 225,5 - 45 40 160 200 76,5 - PG11 55,8 9,5 G2 G1¼ 21,5
CMB 4.00 T 247 428,8 222,3 48 60 12 323,5 133,5 190 264,5 - 60 50 190 240 77,5 - PG16 65,5 12 G2 G1¼ 39,0
CMB 5.50 T 247 428,8 222,3 48 60 12 323,5 133,5 190 264,5 - 60 50 190 240 77,5 - PG16 65,5 12 G2 G1¼ 41,0
CMC 0.75 M 186 313,3 186,8 36,8 43 9 247 97 150 - 198 45 40 140 180 63,5 PG11 - 57,3 9,5 G2 G2 12,0
CMC 0.75 T 186 313,3 186,8 36,8 43 9 247 97 150 197,5 - 45 40 140 180 63,5 - PG11 57,3 9,5 G2 G2 12,0
CMC 1.00 M 186 313,3 186,8 36,8 43 9 247 97 150 - 198 45 40 140 180 63,5 PG11 - 57,3 9,5 G2 G2 13,0
CMC 1.00 T 186 313,3 186,8 36,8 43 9 247 97 150 197,5 - 45 40 140 180 63,5 - PG11 57,3 9,5 G2 G2 13,0
CMD 1.50 M 213 384,3 222,8 36,8 68 12 271,5 111,5 160 - 243,5 45 40 160 200 100,5 PG13,5 - 69,3 9,5 G2½ G2½ 22,0
CMD 1.50 T 213 384,3 222,8 36,8 68 12 271,5 111,5 160 225,5 - 45 40 160 200 100,5 - PG11 69,3 9,5 G2½ G2½ 22,0
CMD 2.00 M 213 397,3 222,8 36,8 68 12 271,5 111,5 160 - 243,5 45 40 160 200 100,5 PG13,5 - 69,3 9,5 G2½ G2½ 24,0
CMD 2.00 T 213 384,3 222,8 36,8 68 12 271,5 111,5 160 225,5 - 45 40 160 200 100,5 - PG11 69,3 9,5 G2½ G2½ 24,0
CMD 3.00 T 213 397,3 222,8 36,8 68 12 271,5 111,5 160 225,5 - 45 40 160 200 100,5 - PG11 69,3 9,5 G2½ G2½ 24,0
CMD 4.00 T 213 449,3 234,8 36,8 68 12 271,5 111,5 160 354 - 45 50 160 200 100,5 - PG16 69,3 9,5 G2½ G2½ 31,5
CMR 0.75 180 310,3 181,8 36,8 45 9 229 97 132 197,5 198 45 40 140 180 60,5 PG11 PG11 52,3 9,5 G1½ G1½ 11,0
CMR 1.00 180 310,3 181,8 36,8 45 9 229 97 132 197,5 198 45 40 140 180 60,5 PG11 PG11 52,3 9,5 G1½ G1½ 12,2
[1]= Three-phase only
[2]= Single phase only
MATERIALS TABLE
Ref. Name Material Ref. Name Material
1 Pump body Cast iron 21 Adjusting ring Steel C70
3 Motor support Aluminium 22 Tie-rod Galvanised Fe 42
4 Seal housing disc AISI 304 23 Capacitor [2] -
6 Shaft see page 16 24 Filler cap Brass
7 Impeller see page 16 25 Drain plug Brass
11 Mechanical seal Carbon/Ceramic/NBR 26 O-Ring NBR
12 Motor casing with stator - 30 Seal spacer [3] Brass
13 Motor cover [1] Aluminium 34 Impeller nut [4] AISI 304
14 Fan PA6 42 Foot PVC
15 Fan cover Galvanised Fe P04 52 Capacitor-holder box [2] ABS
16 Terminal box - 53 Capacitor-holder box cover [2] ABS
17 Terminal box cover [1] Aluminium 75 Washer Aluminium
18 Spray protector ring NBR 76 Washer Aluminium
19 Bearing (pump side) - 200 Screw (pump body) A2 UNI7323 stainless steel
20 Bearing (motor side) -
[1]= For three-phase only [2]= For single phase only
[3]= For CMA 0.50, CMB 0.75-1.00, CMC 0.75-1.00 only [4]= Except for CMA 0.50
18,3
MATERIALS TABLE
Ref. Name Material Ref. Name Material
1 Pump body Cast iron 22 Tie-rod Galvanised Fe 42
3 Motor support Cast iron 23 Capacitor [1] -
6 Rotor shaft see page 16 24 Filler cap Brass
7 Impeller see page 16 25 Drain plug Brass
11 Mechanical seal Carbon/Ceramic/NBR 26 O-Ring NBR
12 Motor case - 32 Key AISI 304
13 Motor cover [1] Aluminium 34 Impeller nut AISI 304
14 Fan PA6 42 Foot PVC
15 Fan cover Galvanised Fe P04 52 Capacitor-holder box [2] ABS
16 Terminal box - 53 Capacitor-holder box cover [2] ABS
17 Terminal box cover [1] Aluminium 75 Washer Aluminium
18 Spray protector ring NBR 76 Washer Aluminium
19 Bearing (pump side) - 101 Seeger ring AISI 420
20 Bearing (motor side) - 110 Motorprotector -
21 Adjusting ring Steel C70 200 Screw (pump body) A2 UNI7323 stainless steel
[1]= Three phase only [2]= Single phase only
32**
*= Ø20 for CMB 4.00 - 5.50
**= 33 for CMB 4.00 - 5.50
MATERIALS TABLE
Ref. Name Material Ref. Name Material
1 Pump body Cast iron 21 Adjusting ring Steel C70
3 Motor support Aluminium 22 Tie-rod Galvanised Fe 42
4 Seal housing disc AISI 304 23 Capacitor [2] -
6 Rotor shaft AISI 420 24 Filler cap Brass
7 Impeller Brass 25 Drain plug Brass
11 Mechanical seal Carbon/Ceramic/NBR 26 O-Ring NBR
12 Motor case - 30 Seal spacer Brass
13 Motor cover [1] Aluminium 34 Impeller nut AISI 304
14 Fan Polypropylene 42 Foot PVC
15 Fan cover Galvanised Fe P04 52 Capacitor-holder box [2] Polypropylene
16 Terminal box - 53 Capacitor-holder box cover [2] Polypropylene
17 Terminal box cover [1] Aluminium 75 Washer Aluminium
18 Spray protector ring NBR 76 Washer Aluminium
19 Bearing (pump side) - 200 Screw (pump body) A2 UNI7323 stainless steel
20 Bearing (motor side) -
[1]= For three phase only [2]= For single phase only
Ø26
18,3