Scribd
Upload
61 views4 pages

Sensor de Humedad y Temperatura MTH100

The MTH100 is a single probe temperature and humidity transmitter that uses an advanced sensor module to measure temperature from -20 to 80°C and humidity from 0-100% with high accuracy and stability. It has an output of 0-5VDC, 0-10VDC, or RS485 and is widely used for temperature and humidity measurement in indoor air applications.

Uploaded by

Joseba El mismo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views4 pages

Sensor de Humedad y Temperatura MTH100

The MTH100 is a single probe temperature and humidity transmitter that uses an advanced sensor module to measure temperature from -20 to 80°C and humidity from 0-100% with high accuracy and stability. It has an output of 0-5VDC, 0-10VDC, or RS485 and is widely used for temperature and humidity measurement in indoor air applications.

Uploaded by

Joseba El mismo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

WALL TYPE

T&H Transmitter
0-5VDC, 0-10VDC, RS485 OUTPUT
Model No.: MTH100

1
General TEMPERATURE HUMDITY

Specifications HIGH QUALITY


GS 19A16D01-01EN MTH100

◼ Overview
D
MTH100 is single probe temperature and humidity transmitter,
adopting original international advanced sensor module and high
performance, single chip designed for temperature humidity air
measurement indoor room, widely used in air T &H measurement
as the integrated part in equipment and machine

◼ Feature
⚫ High Accuracy, High Stability, Excellent sealing technology
⚫ Measure range: T: -20 to 80°C, H: 0-100%
⚫ Output: 0-5VDC,0-10VDC, RS485 output
⚫ Accuracy: T:±0.3°C, H:±3%; Resolution: T:0.1, H:0.1%RH
⚫ Long-term stability: T:＜ 0.04/year, H: ＜0.5%RH/year
⚫ Response time T: 6t (63%): min=2s, max=5s; H(90%): 2s
⚫ Size:115mm x16 (LXD)
⚫ Wide power supply: 9-30VDC

◼ Specification

T:±0.3℃ (Full range in average); Power Supply 15-36VDC (4-20mA Output);


Accuracy RH: 3%RH (including non-linear, Power consumption 15mA
repeatability, hysteresis)
Long Stability T: ＜0.04℃/year; RH: ＜0.05%RH/year Probe Material ABS
Range T: -20 to 80℃; Probe Type Dust-proof (standard); water-proof
RH:0-99.9% Installation Wall Type
Resolution T: 0.1℃, RH:0.1%RH Probe Size 115mmx16mm (LXD);
Response time T: 6t(63%): min=2s, max=5s; Terminals Size 1x2.5 mm² or 2x1.5 mm²
H (90% static air): 2second Entry connector M16×1.5mm
Load resistor ＜500ohm Protection IP54 (Probe)
Output 0-5VDC, 1-5VDC; RS485 output Working Ambient T:-40 to 80℃,
RS485 Protocol Standard MODBUS-RTU protocol H:0-99.9%, no dew
Baud rate 9600; customized Storage Temperature 10-50℃ (0-125℃ at peak)
◼ Size (mm)
Size

◼ Diagram
MTH100: 0-5VDC,0-10VDC output Terminals& Diagram

MTH100: RS485 Terminals &Diagram

3
◼ Accuracy
Analog Output: 4-20mA, 0-5VDC, 0-10VDC

RS485 Output

◼ Order Code
MTH100 temperature and humidity transmitter
Order Code: MTH100-NNVN Description
MTH100 -X -X X X MTH100 temperature and humidity transmitter
Type -N Wall Type
-D Duct Type
N Temperature and humidity
Measurement Type T Temperature only
H Humidity only
V 0-5VDC
Installation V2 0-10VDC
R RS485 output
N Standard type, dust-proof
Probe Type
W Water-proof (special)

You might also like