Scribd
Upload
28 views2 pages

Vinsco Tolerance

This document provides tolerance specifications for various dimensions of springs, including: - Diameter tolerance ranges from 0/-0.12mm to 0/-0.57mm depending on diameter size. - Thickness tolerance ranges from +0.02/-0.06mm to +0.10/-0.10mm depending on thickness size. - Overall height tolerance ranges from +0.10/-0.05mm to +0.30/-0.30mm depending on height size. - Force tolerance ranges from +25%/-7.5% to +5%/-5% depending on height size.

Uploaded by

Manusawin Pinsong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views2 pages

Vinsco Tolerance

This document provides tolerance specifications for various dimensions of springs, including: - Diameter tolerance ranges from 0/-0.12mm to 0/-0.57mm depending on diameter size. - Thickness tolerance ranges from +0.02/-0.06mm to +0.10/-0.10mm depending on thickness size. - Overall height tolerance ranges from +0.10/-0.05mm to +0.30/-0.30mm depending on height size. - Force tolerance ranges from +25%/-7.5% to +5%/-5% depending on height size.

Uploaded by

Manusawin Pinsong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Tolerance https://www.vinscospring.

com

Diameter Tolerance
De or Di mm Permissible deviation in mm

De Di Concentricity

over 3 to 6 0 / -0.12 +0.12 / 0 0.15

over 6 to 10 0 / -0.15 +0.15 / 0 0.18

over 10 to 18 0 / -0.18 +0.18 / 0 0.22

over 18 to 30 0 / -0.21 +0.21 / 0 0.26

over 30 to 50 0 / -0.25 +0.25 / 0 0.32

over 50 to 80 0 / -0.30 +0.30 / 0 0.60

over 80 to 120 0 / -0.35 +0.35 / 0 0.70

over 120 to 180 0 / -0.40 +0.40 / 0 0.80

over 180 to 250 0 / -0.46 +0.46 / 0 0.92

over 250 to 315 0 / -0.52 +0.52 / 0 1.04

over 315 to 400 0 / -0.57 +0.57 / 0 1.14

over 400 to 500 0 / -0.63 +0.63 / 0 1.26

Thickness Tolerance
t or t' mm Tolerance for t mm

Group 1 0.2 to 0.6 +0.02 / -0.06

> 0.6 to < 1.25 +0.03 / -0.09

Group 2 1.25 to 3.8 +0.04 / -0.12

> 3.8 to 6.0 +0.05 / -0.15

Group 3 > 6.0 to 16.0 +0.10 / -0.10


Overall Height Tolerance

t mm Tolerance for lo mm

Group 1 < 1.25 +0.10 / -0.05

Group 2 1.25 to 2.0 +0.15 / -0.08

> 2.0 to 3.0 +0.20 / -0.10

> 3.0 to 6.0 +0.30 / -0.15

Group 3 > 6.0 to 16.0 +0.30 / -0.30

To ensure the specified spring forces, DIN EN 16983 (Previousely DIN 2093) allows the overall height tolerance
to be slightly exceeded.

Force Tolerance

t mm Tolerance for F at the test length lp=l0-0.75h0

Group 1 < 1.25 +25% / -7.5%

Group 2 1.25 to 3.0 +15% / -7.5%

> 3.0 to 6.0 +10% / -5.0%

Group 3 > 6.0 to 16.0 +5.0% / -5.0%

Vinsco Spring Limited

108 Baotashan Rd, Changzhou213022, P. R. China T +86 519 8387 6527 [email protected]
Doc no.: VD01120V1

You might also like