Scribd
Upload
25 views

Lab 4

The document describes the configuration of VLANs on two switches (Sw1 and Sw2) by: 1) Creating VLANs 12, 15, 17 on each switch and assigning names for each; 2) Assigning ports on each switch to the appropriate VLANs - ports Fa0/1-3 to VLAN 12, ports Fa0/4-6 to VLAN 15, and ports Fa0/7-8 to VLAN 17; 3) Verifying the VLAN assignments on each switch using the "show vlan brief" command.

Uploaded by

Mohammad Hamza Noor
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
25 views

Lab 4

The document describes the configuration of VLANs on two switches (Sw1 and Sw2) by: 1) Creating VLANs 12, 15, 17 on each switch and assigning names for each; 2) Assigning ports on each switch to the appropriate VLANs - ports Fa0/1-3 to VLAN 12, ports Fa0/4-6 to VLAN 15, and ports Fa0/7-8 to VLAN 17; 3) Verifying the VLAN assignments on each switch using the "show vlan brief" command.

Uploaded by

Mohammad Hamza Noor
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Designing

Switch 1 Configuration
Switch>
Switch>en
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname sw1
sw1(config)#vlan 12
sw1(config-vlan)#name Admin
sw1(config-vlan)#exit
sw1(config)#vlan 15
sw1(config-vlan)#name Finance
sw1(config-vlan)#exit
sw1(config)#vlan 17
sw1(config-vlan)#name Software
sw1(config-vlan)#exit
sw1(config)#exit
sw1#
%SYS-5-CONFIG_I: Configured from console by console

sw1#sh vlan br

Switch>
Switch>en
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname sw1
Sw1(config)#vlan 12
Sw1(config-vlan)#name Admin
Sw1(config-vlan)#exit
Sw1(config)#vlan 15
Sw1(config-vlan)#name Finance
Sw1(config-vlan)#exit
Sw1(config)#vlan 17
Sw1(config-vlan)#name Software
Sw1(config-vlan)#exit
Sw1(config)#exit
Sw1#
%SYS-5-CONFIG_I: Configured from console by console

sw1#sh vlan br

VLAN Name Status Ports


---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24 Gig0/1, Gig0/2
12 Admin active
15 Finance active
17 Software active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
sw1#

sw1#config t

sw1(config)#int fa0/1
sw1(config-if)#switchport mode access
sw1(config-if)#switchport access vlan 12
sw1(config-if)#exit
sw1(config)#int fa0/2
sw1(config-if)#switchport mode access
sw1(config-if)#switchport access vlan 12
sw1(config-if)#exit

sw1(config)#int fa0/3
sw1(config-if)#switchport mode access
sw1(config-if)#switchport access vlan 12
sw1(config-if)#exit
sw1(config)#int fa0/4
sw1(config-if)#switchport mode access
sw1(config-if)#switchport access vlan 15
sw1(config-if)#exit
sw1(config)#int fa0/5
sw1(config-if)#switchport mode access
sw1(config-if)#switchport access vlan 15
sw1(config-if)#exit
sw1(config)#int fa0/6
sw1(config-if)#switchport mode access
sw1(config-if)#switchport access vlan 15
sw1(config-if)#exit
sw1(config)#int fa0/7
sw1(config-if)#switchport mode access
sw1(config-if)#switchport access vlan 17
sw1(config-if)#exit
sw1(config)#int fa0/8
sw1(config-if)#switchport mode access
sw1(config-if)#switchport access vlan 17
sw1(config-if)#exit
sw1(config)#exit
sw1#
%SYS-5-CONFIG_I: Configured from console by console

sw1#sh vlan br

VLAN Name Status Ports


---- -------------------------------- --------- -------------------------------
1 default active Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24
Gig0/1, Gig0/2
12 Admin active Fa0/1, Fa0/2, Fa0/3
15 Finance active Fa0/4, Fa0/5, Fa0/6
17 Software active Fa0/7, Fa0/8
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
sw1#

Test Connection
Switch 2 Configuration
Switch>
Switch>en
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname sw1
sw1(config)#vlan 12
sw1(config-vlan)#name Admin
sw1(config-vlan)#exit
sw1(config)#vlan 15
sw1(config-vlan)#name Finance
sw1(config-vlan)#exit
sw1(config)#vlan 17
sw1(config-vlan)#name Software
sw1(config-vlan)#exit
sw1(config)#exit
sw1#
%SYS-5-CONFIG_I: Configured from console by console

sw1#sh vlan br

Switch>
Switch>en
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname Sw1
Sw2(config)#vlan 12
Sw2(config-vlan)#name Admin
Sw2(config-vlan)#exit
Sw2(config)#vlan 15
Sw2(config-vlan)#name Finance
Sw2(config-vlan)#exit
Sw2(config)#vlan 17
Sw2(config-vlan)#name Software
Sw2(config-vlan)#exit
Sw2(config)#exit
Sw2#
%SYS-5-CONFIG_I: Configured from console by console

Sw2#sh vlan br

VLAN Name Status Ports


---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24 Gig0/1, Gig0/2
12 Admin active
15 Finance active
17 Software active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
Sw2#

Sw2 con0 is now available


Press RETURN to get started.
Sw2 con0 is now available
Press RETURN to get started.
The Vlan Configuration for sw2 is same as sw1

After commands
int fao/1
switchport mode access
switchport access vlan 12
….

…..

….

…..

Then,

Sw2>en

sw2#sh vlan br

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/1, Fa0/8, Fa0/9, Fa0/10

Fa0/11, Fa0/12, Fa0/13, Fa0/14

Fa0/15, Fa0/16, Fa0/17, Fa0/18

Fa0/19, Fa0/20, Fa0/21, Fa0/22

Fa0/23, Fa0/24, Gig0/1, Gig0/2

12 Admin active Fa0/2, Fa0/3

15 Finance active Fa0/4, Fa0/5

17 Software active Fa0/6, Fa0/7

1002 fddi-default active

1003 token-ring-default active

1004 fddinet-default active

1005 trnet-default active

sw2#

You might also like