Scribd
Upload
111 views

Welder and Welding Operator Qualification Test Record (Asme Ix Code)

Rodelio Ebora passed a welder qualification test on September 9-10, 2023. The test qualified him to manually weld 4-inch schedule 80 carbon steel pipe in the 6G position using gas tungsten arc welding with ER2209 filler metal. Radiographic, visual, guided bend, and tensile tests of test welds met ASME Section IX acceptance criteria, qualifying Ebora for pipe groove welds from 1/4-inch to unlimited thickness. Representatives from the testing laboratory and Ebora's employer Turgen-Omsi certified that the tests were conducted according to ASME Code requirements.

Uploaded by

Neil Taneo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
111 views

Welder and Welding Operator Qualification Test Record (Asme Ix Code)

Rodelio Ebora passed a welder qualification test on September 9-10, 2023. The test qualified him to manually weld 4-inch schedule 80 carbon steel pipe in the 6G position using gas tungsten arc welding with ER2209 filler metal. Radiographic, visual, guided bend, and tensile tests of test welds met ASME Section IX acceptance criteria, qualifying Ebora for pipe groove welds from 1/4-inch to unlimited thickness. Representatives from the testing laboratory and Ebora's employer Turgen-Omsi certified that the tests were conducted according to ASME Code requirements.

Uploaded by

Neil Taneo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

WELDER AND WELDING

OPERATOR QUALIFICATION TEST


RECORD (ASME IX CODE)
NAME RODELIO EBORA TEST DATE SEPTEMBER 9-10, 2023 REV. 0
WQT NO. CWT-WQT-001 RT REPORT NO.
WELDER NO. CWT-001 STD. TEST NO
COMPANY TURGEN-OMSI WPS NO. TURGEN-OMSI-WPS-002
DIVISION QUALIFIED TO
BASE METALS SPECIFICATION TYPE OR GRADE GROUP NO. SIZE (NPS) SCHEDULE THICKNESS DIAMETER
BASE MATERIAL ASTM A790 1 4" 80 9.07mm 114.3mm
WELDED TO ASTM A790 1 4" 80 9.07mm 114.3mm

VARIABLES ACTUAL VALUES RANGE QUALIFIED


TYPE OF WELD JOINT PIPE-GROOVE WITH BACKING PIPE-GROOVE WITH/WITHOUT BACKING
BASE METAL (QW-403) P NO. 10H TO P NO. 10H P NO. 10H TO P NO. 10H
GROOVE FILLET GROOVE FILLET
PLATE THICKNESS
PIPE/TUBE THICKNESS 8.56mm ALL
PIPE DIAMETER 114.3 ≥ 73mm OD ALL
WELDING PROCESS GTAW GTAW
TYPE (MANUAL, SEMI-AUTO,
MECHANIZED, AUTOMATIC) MANUAL MANUAL
GAS BACKING (QW-408) GTAW WITH 99.995% ARGON GTAW WITH 99.995% ARGON
FILLER METAL (AWS SPEC.) (QW-404) SFA 5.9 SFA 5.9
AWS CLASSIFICATION ER2209 ER2209
F-NUMBER 6-5 6-5
POSITION (QW-405) 6G
GROOVE-PLATE &PIPE ≥ 73mm ALL
GROOVE-PIPE < 73mm
FILLET- PLATE & PIPE ≥ 73mm ALL
FILLET- PIPE < 73mm ALL
PROGRESSION UPHILL UPHILL
GMAW TRANSFER MODE NONE NONE
SINGLE OR MULTIPLE ELECTRODES SINGLE SINGLE
GAS/FLUX TYPE ARGON ARGON
ELECTRICAL CHARACTERISTICS (QW-409)
CURRENT DC DC
POLARITY DCSP DCSP
MODE OF TRANSFER NONE NONE

TEST RESULTS
TYPE OF TEST ACCEPTANCE CRITERIA RESULT REMARKS
RADIOGRAPIC EXAMINATION TEST ASME SEC. IX (QW-191.1.2) ACCEPTED

VISUAL EXAMINATION TEST ASME SEC. IX (QW-194) ACCEPTED


GUIDED BEND TEST RESULT (QW-160) FILLET WELD TEST RESULTS (QW-180)
FACE BEND VISUAL TEST
ROOT BEND FRACTURE TEST
SIDE BEND MACRO TEST

TENSILE TEST (QW-150)

TENSILE TEST

CERTIFICATION

TEST CONDUCTED BY: WELDERS TESTING LABORATORIES (PHILS.), INC.


LABORATORY
TEST NUMBER
FILE NAME

WE, THE UNDERSIGNED, CERTTIFY THAT THE STATEMENTS IN THIS RECORD ARE CORRECT AND THAT THE TEST WELDS ARE PREPARED, WELDED, AND TESTED IN ACCORDANCE WITH
THE REQUIREMENTS OF SEC. IX OF THE ASME CODE.

PREPARED BY: APPROVED BY: APPROVED BY: REPRESENTATIVE (QA/QC)

NEIL TANEO ALFONSO BORJA


DATE AND SIGNATURE DATE AND SIGNATURE DATE AND SIGNATURE

You might also like