Scribd
Upload
187 views

Warehouse Load Schedule

The document appears to be a panel schedule that includes: 1) Information about the panel name, voltage, phases, main circuit breaker rating, and cable/conduit sizes. 2) A table listing the circuit number, load description, voltage, phase, circuit breaker rating, wire size, and conduit size for various loads. 3) Calculations for full load current, circuit breaker ampacity, and wire ampacity. Locations for the panels and loads are also included.

Uploaded by

Alvin Pangilinan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
187 views

Warehouse Load Schedule

The document appears to be a panel schedule that includes: 1) Information about the panel name, voltage, phases, main circuit breaker rating, and cable/conduit sizes. 2) A table listing the circuit number, load description, voltage, phase, circuit breaker rating, wire size, and conduit size for various loads. 3) Calculations for full load current, circuit breaker ampacity, and wire ampacity. Locations for the panels and loads are also included.

Uploaded by

Alvin Pangilinan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

PANEL NAME MAIN MCCB CABLE SIZED AND CONDUIT SIZE KAIC ENCLOSURE LOCA

PHASE VOLTS
DP-2A POLE AT AF 3 - #REF! + #REF! MAIN: 10 NEMA-1 UTILI
3 230 3 #REF! #REF! AT #REF! IMC BRS: 10 WALL MTD (PLAT
CKT. BRS MCCB LOAD DISTRIBUTION CABLE/GROUNDING CONDU
LOAD DESCRIPTION PHASE VOLTS KVA BREAKER WIRE
NO POLE AT AF RN SN TN 3Ø AMP TYPE & SIZE TYPE
1 PP-UTIY-1 3 230 3 #REF! #REF! #REF! #REF! #REF! #REF! #REF! 1.732 #REF! #REF! #REF! 3 - #REF! + #REF! IMC
2 PP-UTIY-2 3 230 3 #REF! #REF! #REF! #REF! #REF! #REF! #REF! 1.732 #REF! #REF! #REF! 3 - #REF! + #REF! IMC
3 PP-UTIY-3 3 230 3 #REF! #REF! #REF! #REF! #REF! #REF! #REF! 1.732 #REF! #REF! #REF! 3 - #REF! + #REF! IMC
4 PP-PROD-230V 3 230 3 #REF! #REF! #REF! #REF! #REF! #REF! #REF! 1.732 #REF! #REF! #REF! 3 - #REF! + #REF! IMC
5 PP-CT 3 230 3 #REF! #REF! #REF! #REF! #REF! #REF! #REF! 1.732 #REF! #REF! #REF! 3 - #REF! + #REF! IMC

TOTAL #REF! #REF! #REF! #REF! #REF!


COMPUTATION: Demand Factor : 80% Correction Factor: 94% HMR: 80.30 A

Full Load Current L-L (A): Circuit Breaker Ampacity (A):

I_FL = ( I_3Ø+ √3 x I_1Ø+25% HMR ) x DF I_CB = ( I_FL x 125%)


= ( #REF! + √3 x #REF! + 25% x 80.3 ) x 80% = ( #REF! x 125%)
I_FL = #REF! A I_CB ###
= #REF! A

Wire Ampacity (A): USE : #REF! / #REF! , 3 - #REF! + #REF!


I_WA =( I_FL x 125%) / 𝐂𝐅 AT #REF!
= ( #REF! x 125%)/0.94
I_WA = #REF! A
LOCATION
UTILITY RM
(PLATFORM)
CONDUIT SIZE
SIZE
#REF!
#REF!
#REF!
#REF!
#REF!
PANEL NAME MAIN MCCB CABLE SIZED AND CONDUIT SIZE KAIC ENCLOSURE LOCATION
PHASE VOLTS
MDP-230A POLE AT AF 3 - #REF! + #REF! MAIN: 10 NEMA-1
UTILITY RM
3 230 3 #REF! #REF! AT #REF! IMC BRS: 10 WALL MTD
CKT. BRS MCCB LOAD DISTRIBUTION CABLE/GROUNDING CONDUIT SIZE
LOAD DESCRIPTION PHASE VOLTS KVA
NO POLE AT AF RN SN TN 3Ø TYPE & SIZE TYPE SIZE
1 DP - 1 3 230 3 #REF! #REF! #REF! #REF! #REF! #REF! #REF! 3 - #REF! + #REF! IMC #REF!
2 DP - 2A 3 230 3 #REF! #REF! #REF! #REF! #REF! #REF! #REF! 3 - #REF! + #REF! IMC #REF!
3 DP - 3 3 230 3 #REF! #REF! #REF! - - - #REF! 3 - #REF! + #REF! IMC #REF!
4 100 KVA DT TRANSFORMER 230V/200V 3 230 3 300 350 100.00 - - - 251.0 3 - 150mm² THHN + 22mm²(E) IMC 75mmØ
5 CAPACITOR BANK ( 150KVAR - 6 STEPS) 3 230 3 20 63 3 - 3.5mm² THHN + 3.5mm²(E) IMC 15mmØ

TOTAL #REF! #REF! #REF! #REF! #REF!


COMPUTATION: Demand Factor : 80% Correction Factor: 94% HMR: - A

Full Load Current L-L (A): Circuit Breaker Ampacity (A): TRANSFORMER COMPUTATION: Use Diversity Factor of 1.3

I_FL = ( I_3Ø+ √3 x I_1Ø+25% HMR ) x DF I_CB = ( I_FL x 125%) ((√3×𝐼_𝐹𝐿×𝑉))⁄1000


KVA_𝑇𝑅 =
= ( #REF! + √3 x #REF! + 25% x 0.0 ) x 80% = ( #REF! x 125%) =(√3× #REF! × )/ 1000
230
I_FL = #REF! A I_CB ###
= #REF! A = #REF! / 1.3
KVA_𝑇𝑅 = #REF!
Wire Ampacity (A): USE : #REF! / #REF! , 3 - #REF! + #REF! USE : #REF! DRY TYPE TRANSFORMER 230V/200V 3P 60HZ
I_WA =( I_FL x 125%) / 𝐂𝐅 AT #REF!
= ( #REF! x 125%)/0.94
I_WA = #REF! A
PANEL NAME MAIN MCCB CABLE SIZED AND CONDUIT SIZE KAIC ENCLOSURE LOCATIO
PHASE VOLTS
PP-OFFICE POLE AT AF 2 - 14mm² THHn + 8.0mm² THHN E MAIN: 10 NEMA-1
OFFICE
1 230 2 63 100 AT 25mmØ CONDUIT IMC BRS: 10 WALL MTD
CKT. BRS MCCB CABLE/GROUNDING CONDUIT
NO LOAD DESCRIPTION PHASE VOLTS KVA Ampere Breaker Wire
POLE AT AF 1Ø TYPE & SIZE TYPE
1 Wall Mounted AC(1.5HP) 1 230 2 30 63 1.40 6.1 1 6.09 15.22 7.61 2 - 5.5mm² THHN + 3.5mm² E IMC
2 Wall Mounted AC(1.5HP) 1 230 2 30 63 1.40 6.1 1 6.09 15.22 7.61 2 - 5.5mm² THHN + 3.5mm² E IMC
3 WAC (1HP) 1 230 2 20 63 0.93 4.0 1 4.04 10.11 5.05 2 - 3.5mm² THHN + 3.5mm² E IMC
4 13 RECEPTACLE OUTLET 1 230 2 20 63 2.60 11.3 1 11.30 14.13 14.13 2 - 3.5mm² THHN + 3.5mm² E PVC
5 8 RECEPTACLE OUTLET 1 230 2 20 63 1.60 7.0 1 6.96 8.70 8.70 2 - 3.5mm² THHN + 3.5mm² E PVC
2 - DL 12W, 8 - TROFFER 2x16W, 3 - 2x18W WP, 4 - EF 50 W,
6 2 - EL, 2-EM 1 230 2 20 63 0.76 3.3 1 3.30 8.26 4.13 2 - 3.5mm² THHN + 3.5mm² E PVC

7 SPARE 1 230 2 20 63 1.5 6.5 1 6.52 16.30 8.15 2 - 3.5mm² THHN + 3.5mm² E PVC
8 SPARE 1 230 2 20 63 1.5 6.5 1 6.52 16.30 8.15 2 - 3.5mm² THHN + 3.5mm² E PVC
9 SPARE 1 230 2 20 63 1.5 6.5 1 6.52 16.30 8.15 2 - 3.5mm² THHN + 3.5mm² E PVC
10 SPARE 1 230 2 20 63 1.5 6.5 1 6.52 16.30 8.15 2 - 3.5mm² THHN + 3.5mm² E PVC

TOTAL 9.5 57.35


COMPUTATION: Demand Factor : 70% Correction Factor: 94% HMR: 6.09 A

Full Load Current L-L (A): Circuit Breaker Ampacity (A):

I_FL = I_1Ø+25% HMR ) x DF I_CB = ( I_FL x 125%)


= ( 57.3 + 25% x 6.1 )x 70% = ( 41.2 x 125%)
I_FL = 41.2 A I_CB =### 51.5 A

Wire Ampacity (A): USE : 63AT / 125AT , 2 - 14mm² THHn + 8.0mm² THHN E
I_WA =( I_FL x 125%) / 𝐂𝐅 AT 25mmØ CONDUIT
= ( 41.2 x 125%)/0.94
I_WA = 54.80 A
LOCATION

OFFICE

CONDUIT SIZE
SIZE
20mmØ
20mmØ
15mmØ
20mmØ
20mmØ

20mmØ

20mmØ
20mmØ
20mmØ
20mmØ

You might also like