®

Direct-Drive
Plunger Pumps

Model 2SFX
SPECIFICATIONS
Electric Motor or Gas Engine U.S. Metric U.S. Metric
must be purchased separately. Measure Measure Measure Measure

MODEL 2SFX20ES 2SFX22ES

Flow ................................ 2.0 GPM (7.6 L/M) 2.2 GPM (8.3 L/M)
Max. Discharge Pressure 2000 PSI (140 BAR) 2000 PSI (140 BAR)
Max. RPM ....................... 3450 RPM (3450 RPM) 3450 RPM (3450 RPM)
Stroke.............................. 0.122" (3.1 mm) 0.132" (3.35 mm)

PUMP FEATURES MODEL 2SFX22GS

Flow ................................................................................ 2.2 GPM (8.3 L/M)
• Triplex design provides smoother liquid flow. Max. Discharge Pressure ............................................... 2000 PSI (140 BAR)
Max. RPM....................................................................... 3450 RPM (3450 RPM)
• Ultimate portability—less than 12 pounds—less than 10" long. Stroke ............................................................................. 0.132" (3.35 mm)
Optional Electric-3/4" Shaft - 2SFX22GES
• Your choice of motorized unit or hollow shaft pump only for
direct mounting to gas or electric motor. MODEL 2SFX25ES 2SFX25GZ
Flow ................................ 2.5 GPM (9.5 L/M) 2.5 GPM (9.5 L/M)
• Regulating Unloader with By-pass Hose is standard on Max. Discharge Pressure 1500 PSI (105 BAR) 2500 PSI (175 BAR)
each 2SFX pump to assure system pressure control and Max. RPM ....................... 3450 RPM (3450 RPM) 3450 RPM (3450 RPM)
pump protection. Stroke.............................. 0.150" (3.8 mm) 0.169" (4.3 mm)

• Optional Thermo Valve mounts directly into by-pass hose for MODEL 2SFX29ELS
Flow................................................................................. 2.85 GPM (10.8 L/M)
optimum heat protection while in by-pass. Max. Discharge Pressure................................................ 1500 PSI (105 BAR)
Max. RPM ....................................................................... 1725 RPM (1725 RPM)
Stroke.............................................................................. 0.335" (8.5 mm)
COMMON PUMP SPECIFICATIONS
MODEL 2SFX30GS 2SFX30GZ
Inlet Pressure Range............. Flooded to 75 PSI (Flooded to 5.25 BAR) Flow ................................ 3.0 GPM (11.4 L/M) 3.0 GPM (11.4 L/M)
Bore ....................................... 0.708" (18 mm) Max. Discharge Pressure 2000 PSI (140 BAR) 2500 PSI (175 BAR)
Max. Liquid Temperature ....... 160°F (71°C) Max. RPM ....................... 3450 RPM (3450 RPM) 3450 RPM (3450 RPM)
Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations. Stroke.............................. 0.189" (4.8 mm) 0.189" (4.8 mm)
Optional Electric-3/4" Shaft - 2SFX30GES
Crankcase Capacity .............. 11.83 oz. (.35 L)
Inlet Ports (1) ......................... 3/8" NPTF (3/8" NPTF) MODEL 2SFX35GS
Discharge Ports (2)................ 3/8" NPTF (3/8" NPTF) Flow................................................................................ 3.5 GPM (13.2 L/M)
By-pass Port .......................... 1/4" NPTF (1/4" NPTF) Max. Discharge Pressure............................................... 2000 PSI (140 BAR)
Max. RPM....................................................................... 3450 RPM (3450 RPM)
Weight (Pump Only) .............. 11.83 lbs. (4.8 kg)
Stroke ............................................................................. 0.220" (5.6 mm)
Dimensions (Pump Only)....... 9.13 x 6.65 x 6.50" (232 x169 x165mm) Optional Electric-3/4" Shaft - 2SFX35GES

ES = Electric 5/8" hollow shaft with bolt mount.

WARNING GES = Electric 3/4" hollow shaft with bolt mount.
All systems require both a primary pressure regulating device (i.e., regulator, unloader) and GS, GZ = Gas 3/4" hollow shaft with bolt mount and adapter.
a secondary pressure safety relief device (i.e., pop-off valve, safety valve). Failure to Add “3” to Part Number for Hi-Temp version.
install such relief devices could result in personal injury or damage to the pump or to
system components. CAT PUMPS does not assume any liability or responsibility for the Refer to pump Service Manual for repair procedures, additional technical
operation of a customer’s high pressure system.
information and pump warranty.

“Customer confidence is our greatest asset”

EXPLODED VIEW SFX PLUNGER PUMP MODELS
September 2007 2SFX20, 2SFX22, 2SFX25, 2SFX29, 2SFX30, 2SFX35

PARTS LIST
ITEM P/N MATL DESCRIPTION MODEL USED QTY ITEM P/N MATL DESCRIPTION MODEL USED QTY
5 547161 STCP Screw, HH (M6x14) [3/03] All Models 3 152 ✝ 26089 NBR O-Ring, Adapter - 80D All Models 3
549360 STCP R Screw, HH (M6x14) [3/03] All Models 3 11377 FPM O-Ring, Adapter - 80D All Models 3
8 547153 AL Cover, Bearing, Inner [3/03] All Models 1 157 45859 BB Adapter, Discharge, Seat All Models 3
10 14041 NBR O-Ring, Bearing Cover-70D [3/03] All Models 1 546938 BB Adapter, Discharge, Seat w/O-Rings 2SFX29ELS 3
11 55337 NBR Seal, Oil - 70D [3/03] All Models 1 44878 BB Spacer, Discharge, Valve 2SFX25GZ, 30GZ 3
15 14488 STL Bearing, Ball, Inner All Models 1 159 ✝ 26089 NBR O-Ring, Adapter - 80D All Models 3
20 547046 TNM Rod, Connecting All Models 3 11377 FPM O-Ring, Adapter - 80D All Models 3
25 46109 FCM Crankshaft, 3450 RPM, 5/8", 3.1mm 2SFX20ES 1 164 44881 S Seat 2SFX25GZ, 30GZ 3
44929 FCM Crankshaft, 3450 RPM, 5/8", 3.35mm 2SFX22ES 1 166 43723 S Valve All Models 3
46074 FCM Crankshaft, 3450 RPM, 3/4", 3.35mm 2SFX22GS 1 167 541062 S Spring All Models 3
45844 FCM Crankshaft, 3450 RPM, 5/8", 3.8mm 2SFX25ES 1 168 44565 PVDF Retainer, Spring All Models 3
542967 FCM Crankshaft, 3450 RPM, 3/4", 4.3mm 2SFX25GZ 1 185 44879 BB Manifold, Discharge All Models 1
45426 FCM Crankshaft, 1725 RPM, 5/8", 8.5mm 2SFX29ELS 1 188 87859 STZP Screw, HSH (M8x75) All Models 6
44931 FCM Crankshaft, 3450 RPM, 5/8", 4.5mm 2SFX30ES 1 126762 STCP R Screw, HSH (M8x75) All Models 6
546334 FCM Crankshaft, 3450 RPM, 3/4", 4.8mm [12/01] 2SFX30GS,GZ 1 249 30520 — Assy, Adapter Mount, Gas All Gas Models 1
46017 FCM Crankshaft, 3450 RPM, 3/4", 5.6mm 2SFX35GS 1 46271 AL Flange 1
26 12385 STL Ring, Retaining All Models 1 549351 STCP R Screw, HH (5/16-24x20) 4
27 15710 STL Bearing, Ball, Outer All Models 1 15845 STZP Lockwasher (M8) 4
32 547961 RTP Cap, Oil Filler w/O-Ring All Models 1 126232 STCP R Lockwasher (M8) 4
33 14179 NBR O-Ring, Oil Filler Cap - 70D All Models 1 126573 STCP R Washer, Flat (M8) 4
37 92241 — Gauge, Oil, Bubble w/Gasket All Models 1 255 30517 STZP Assy, Bolt Mount All Models 1
38 44428 NBR Gasket, Oil Gauge - 80D All Models 1 30980 STZP R Washer, Flat (3/8") 4
48 44842 NY Plug, Drain (1/2" NPT) All Models 1 30921 STZP R Lockwasher, Split (3/8") 4
49 14179 NBR O-Ring, Drain Plug - 70D All Models 1 34100 STZP Screw, HH (3/8"-16x1-3/8") 4
53 547285 AL Crankcase [3/03] All Models 1 126543 STCP R Screw, HH (3/8"-16x1-3/8") 4
64 16948 CM Pin, Crosshead All Models 3 6106 — Lubricant, Antiseize 1
65 540073 SZZ Rod, Plunger, Unchromed 2SFX20,22,25,30,35 3 30050 STL Key (3/16x3/16x1-1/4" HD) 1
540089 SZZ Rod, Plunger, Unchromed 2SFX29ELS 3 285 80228 STL Screw (M8-1.25x80) (Motor Removal) All Models 2
542958 SHS Rod, Plunger 2SFX25GZ,30GZ 3 300 34053 NBR Kit, Seal (Inclds: 106,125,152,159) All Models 1
69 126259 STCP R Washer (M24) All Models 3 33953 HT Kit, Seal, Hi-Temp All Models 1
70 25461 NBR Seal, Oil All Models 3 (Inclds: 106,125,134,152,159)
90 45847 CC Plunger (M18x14) All Models 3 33453 FPM Kit, Seal (Inclds: 106,125,152,159) All Models 1
45429 CC Plunger (M18x16) 2SFX29ELS 3 310 34056 NBR Kit, Valve All except 29ELS, GZ 1
100 44869 PVDF Retainer, Seal All Models 3 (Inclds: 152,157,159,166,167,168)
106 ✝ 44876 NBR Seal, LPS w/S-Spg All Models 3 34052 NBR Kit, Valve 2SFX25GZ, 30GZ 1
545192 FPM Seal, LPS w/SS-Spg All Models 3 (Inclds: 152,159,164,166,167,168)
110 44874 BB Manifold, Inlet All Models 1 31642 NBR Kit, Valve (Inclds: 157,166,167,168) 2SFX29ELS 1
125 43245 SNG Seal, HPS w/S All Models 3 311 34668 NBR Kit, Inlet Valve (Inclds: 134-137,152,159) All Models 1
46652 HT Seal, HPS, “Hi-Temp”, 2-Pc w/S-Support All Models except GZ 3 352 44050 STZP Gauge, Oil, Removal Tool All Models 1
134 45854 S Valve, Inlet All Models 3 400 7500XS BB Unloader, Regulating Std. 2SFX Models 1
33873 NY Valve, Inlet, Hi-Temp All Models 3 — 7625 BB Unloader, Regulating 2SFX25GZ, 30GZ 1
135 549520 S Spacer All Models 3 467 45868 BB Barb, Pump Inlet (1/4" Hose x 1/4" NPT) All Models 1
136 44872 S Spring, Inlet All Models 3 — 34455 — Assembly, Pulsator All Models 1
137 88575 S Washer, Conical (M6) All Models 3 — 6575 — Plunger Pump Service DVD 1
138 81240 SS Nut, Hex (M6) All Models 3 — 6107 — Oil, Bottle (21 oz) ISO 68 Multi-Viscosity Hydraulic All Models 1
(Fill to specified crankcase capacity prior to start-up)
Italics are optional items. [ ] Date of latest production change. ✝ Production parts are different than service parts.
R Components comply with RoHS Directive. See Tech Bulletins 002, 024, 036, 043, 055, 064, 065, 070, 073, 074, 083 , 91 and 92 for additional information.
Effective with 1/90 Mfg. date 45853, 14036, 44861, 92519 have been replaced with new one piece crankcase. ✝Production parts are different than service parts.
Note: Discard Key which may come standard with most motors and engines and use only the key included in this kit.
MATERIAL CODES (Not Part of Part Number): AL=Aluminum BB=Brass CC=Ceramic CM=Chrome-moly FCM=Forged Chrome-moly FPM=Fluorocarbon
HT=Hi-Temp (EPDM Alternative) NBR=Medium Nitrile (Buna-N) NY=Nylon PVDF=Polyvinylidene Fluoride RTP=Reinforced Composite S=304SS SHS=304SS/High Strength
SNG=Special Blend (Buna) SS=316SS STL=Steel STCP=Steel/ Chrome-Plated STZP=Steel/Zinc Plated SZZ=304SS/Zamak TNM=Special High Strength
Center raised pilot guide on the Adapter Plate assures proper alignment of pump and engine. Before mounting pump onto engine inspect engine for recessed seal and
bearing guide to permit adapter to completely seat into recess and four bosses to be flush with engine face.
 7500XS UNLOADER 7625 UNLOADER
FOR “ELS, ES, GS” PUMP MODELS FOR “GZ” PUMP MODELS
Specifications U.S. Measure Metric Measure Specifications U.S. Measure Metric Measure
Flow ....................................... 0.5-6.0 GPM (2-23 L/M) Flow ....................................... 0.5-7.8 GPM (2-30 L/M)
PSI Range.............................. 100-2000 PSI (7-140 BAR) PSI Range.............................. 100-2500 PSI (7-175 BAR)
Max. Temperature .................. 190°F (88°C) Max. Temperature .................. 194°F (90°C)
Inlet Port - Rear ..................... 3/8" NPTM (3/8" NPTM) Inlet Port................................. 3/8" BSPM (3/8" BSPM)
Discharge Port - Front ........... 3/8" NPTM (3/8" NPTM) Discharge Port ....................... 3/8" BSPF (3/8" BSPF)
By-pass Port - Barb ............... 1/4" NPT (1/4" NPT) By-pass Port .......................... 3/8" BSPF (3/8" BSPF)
Weight .................................... 14 oz. (0.40 kg) Auxiliary Port.......................... 1/4" BSPF (1/4" BSPF)
Dimensions ............................ 3.0 x 1.0 x 4.25" (76 x 25 x 108 mm) Weight .................................... 19.5 oz. (0.55 kg)
Dimensions ............................ 3.2 x 1.5 x 4.7" (81 x 38 x 119.4 mm)

PARTS LIST
ITEM P/N MATL DESCRIPTION QTY
402 540081 BB Cap, Adjusting 1
404 31047 BB Nut, Lock 1
408 32094 STZP R Spring, Pressure 1
410 107672 BB Retainer, Spring 1 PARTS LIST
412 45694 S Stem, Piston (M5) 1 ITEM P/N MATL DESCRIPTION QTY
414 20184 PTFE Back-up-Ring, Piston Stem 1 401 32088 NY Handle, Black 1
415 14190 NBR O-Ring, Piston Stem - 70D 1 402 33859 BB Cap, Adjusting 1
14161 FPM O-Ring, Piston Stem - 70D 1 403 33857 BB Nut, Lock (M18x1) 1
425 107673 BB Retainer, Piston 1
428 13969 NBR O-Ring, Retainer- 70D 1 404 33061 STZP Screw, Set (M4x4) 1
14320 FPM O-Ring, Retainer - 70D 1 408 32094 STZP R Spring, Pressure 1
429 14759 NBR O-Ring, Body 1 410 32819 STZP Retainer, Spring 1
14160 FPM O-Ring, Body - 70D 1 412 33860 S Stem, Valve 1
430 107675 PTFE Back-up-Ring, Body 1 414 33278 PTFE Back-up-Ring, Stem 1
435 45696 BB Valve and Ball Assembly (M5) 1 415 — NBR O-Ring, Stem 1
436 107680 S Seat 1 425 33861 BB Retainer, Piston 1
437 13963 NBR O-Ring, Seat - 70D 1 428 33043 NBR O-Ring, Retainer 1
— 14303 FPM O-Ring, Seat - 70D 1
439 13969 NBR O-Ring, By-pass Fitting- 70D 1 429 — NBR O-Ring, Body 1
— 14320 FPM O-Ring, By-pass Fitting - 70D 1 430 33276 PTFE Back-up-Ring, Body 1
440 — BB Body 1 435 33853 SSS Valve and Ball Assembly (M6) 1
443 541060 BB Valve, Check w/O-Ring 1 436 33806 NBR Seat, w/O-Ring 1
444 45924 S Spring 1 437 — NBR O-Ring, Seat 1
446 13969 NBR O-Ring, Discharge Fitting - 70D 1 439 — NBR O-Ring, By-pass Fitting - 85D 1
14320 FPM O-Ring, Discharge Fitting - 70D 1 440 — BB Valve Body 1
455 45865 BB Barb, By-pass Fitting 1
460 107681 BB Fitting, Discharge (3/8" NPTM) 1 441 — NBR O-Ring, Flow Balancer 1
465 46140 — By-pass Hose (5-1/2"x1/4") 1 443 33852 BB Valve, Check 1
45983 — By-pass Hose (8-1/2"x1/4") (UMS) 1 444 33843 S Spring 1
466 — STZP Clamp, Hose 2 446 — NBR O-Ring, Discharge Fitting 1
468 32097 NBR Kit, O-Ring 1 454 33865 BB Barb, By-pass (3/8" NPTx1/4) 1
(Inclds: 414,415,428,429,430,437,439,446) 455 33846 BB Fitting, By-pass (3/8" BSP) 1
31627 FPM Kit, O-Ring 1 460 33847 BB Fitting, Discharge (3/8" BSP) 1
(Inclds: 414,415,428,429,430,437,439,446) 465 46140 — By-pass Hose (5-1/2"x1/4") 1
485 7140 BB Valve, Thermo 1
7135 RTP Valve, Thermo 1 466 — STZP Clamp, Hose 2
486 — BB Tee, T.V. Mount 1 468 33098 NBR Kit, O-Ring 1
487 — BB Nipple, T.V. Mount 1 (Inclds: 414,415,428,429,430,437,439,441)
Italics are optional items. R Components comply with RoHS Directive. Italics are optional items. R Components comply with RoHS Directive.
MATERIAL CODES (Not Part of Part Number): BB=Brass FPM=Fluorocarbon MATERIAL CODES (Not Part of Part Number): BB=Brass
NBR=Medium Nitrile (Buna-N) PTFE=Pure Polytetrafluoroethylene NBR=Medium Nitrile (Buna-N) NY=Nylon PTFE=Pure Polytetrafluoroethylene
RTP=Reinforced Composite S=304SS STZP=Steel/Zinc Plated S=304SS SSS=416SS STZP=Steel/Zinc Plated

OPERATION operation. Excessive temperatures will cause premature wear or

damage to the pump and VOID THE WARRANTY.
A Regulating Unloader comes with each 2SFX pump to provide system
pressure regulation and pump protection. Hi-Temp Units with special Hi-Temp seals do not use the Thermo Valve.
Use optional Dual Pressure Switches and Mechanical Relay in Auto Shut
For MAXIMUM SUCTION capability, Regulating Unloader should be Off Kits 34870 and 34871.
remounted on discharge manifold, OPPOSITE from pump inlet port.
If unit is INFREQUENTLY USED OR PERIODICALLY STORED, seals
Standard Units with return of by-pass back to the inlet of the pump should may become dry. UNDER SUCTION FEED, system must be PURGED
have a Thermo Valve in the by-pass line. BEFORE OPERATION (system liquid must flow through the pump without
By-pass HOSE ASSEMBLY is designed for cold water or ambient discharge restriction) to assure full system pressure is reached.
temperature operation. DO NOT EXCEED 6 MINUTES in by-pass
 OPTIONAL CHEMICAL INJECTORS CHEMICAL INJECTOR PERFORMANCE CHART
7192 - 7193 Adjustable CHEMICAL INJECTOR Optional Special Ported Chemical Injector for Unloader Mounting
FOR 7500XS UNLOADER MODELS Lo-Pressure Nozzle Rating Max. Chem. Draw Hi-Press Nozzle
Specifications U.S. Measure Metric Measure Pump Injector (Max. Downstream) (0 PSI) “Deduction” (Press
Flow ....................................... 2.0-3.5 GPM (7.6-13.2 L/M) Flow Orifice Size (Press for Injector) (Downstream) drop across Inj.)
Nozzle Orifice......................... 1.8 / 2.1 mm (1.8 / 2.1 mm) 2.0 1.8 /2.1 mm 255/100 PSI 60/52 oz/min 150 /100 PSI
Hose Barb .............................. 1/4" (1/4") 2.2 1.8 /2.1 mm 240/110 PSI 60/52 oz/min 175/110 PSI
Inlet Port................................. M18 x 1.0" (M18 x 1.0")
Discharge Port ....................... 3/8" NPTM (3/8" NPTM) 3.0 1.8 /2.1 mm 275/225 PSI 60/54 oz/min 300/150 PSI
Weight .................................... 6.3 oz. (0.18 kg) 3.5 1.8 /2.1 mm 350/300 PSI 56/50 oz/min 350 /200 PSI
Dimensions ............................ 2.0 x 1.0 x 3.0" (51 x 25 x 76 mm) Optimum performance of chemical injector occurs with a 35 ft. high pressure hose
and a minimum 3/8" I.D. The type of hose, extended lengths, reduced I.D. and fit-
7224 Adjustable CHEMICAL INJECTOR tings may create back pressures in excess of the low pressure nozzle rating and
FOR 7625 UNLOADER MODEL - GZ prevent the injector from drawing chemical. Deduct hose friction loss from
Specifications U.S. Measure Metric Measure above low PSI Nozzle. Contact CAT PUMPS for assistance with other options.
Flow ....................................... 2.0-3.5 GPM (7.6-13.2 L/M) Refer to Hose Friction Loss Chart in the Service Manual for pressure loss with
Nozzle Orifice......................... 2.3 mm (2.3 mm) longer hose.
Hose Barb .............................. 1/4" (1/4")
Inlet Port................................. M22 x 1.5 (M22 x 1.5)
Discharge Port ....................... 3/8" NPTM (3/8" NPTM)
Weight .................................... 6.3 oz. (0.18 kg) An optional, specially ported chemical injector may be
Dimensions ............................ 2.0 x 1.0 x 3.0" (51 x 25 x 76 mm) mounted directly to the discharge of the unloader. Remove
7233 - 7235 Fixed CHEMICAL INJECTOR o-ring, check valve and spring from discharge fitting of
FOR 7625 UNLOADER MODEL - GZ unloader; insert into injector and thread into unloader
Specifications U.S. Measure Metric Measure discharge port. Discard o-ring and discharge fitting. Refer
Flow ....................................... 2.0-3.5 GPM (7.6-13.2 L/M)
Nozzle Orifice......................... 1.8 / 2.1 mm (1.8 / 2.1 mm) to the performance chart to determine the orifice size best
Hose Barb - Exterior .............. 1/4" (1/4") suited to the system flow. Chemical draw occurs under low
Hose Barb - Interior ............... 8/32" UNCF (8/32" UNCF)
Inlet Port................................. M22 x 1.5 (M22 x 1.5) pressure. Select the Change Over Nozzle (32149),
Discharge Port ....................... 3/8" NPTM (3/8" NPTM) Adjustable Nozzle (32151), or Vari-Nozzle (7930-7980) to
Weight .................................... 6.3 oz. (0.18 kg)
Dimensions ............................ 2.25 x 1.0 x 2.63" (57 x 25 x 67 mm) permit the adjustment from low to high pressure.

Adjustable Fixed For optimum performance when using a chemical injector,

use a single wire braid hose on the discharge line. Too
flexible a hose will prevent the unloader from receiving the full
pressure signal to activate the by-pass mode.

For correct nozzle selection, read system pressure at the

pump. DO NOT READ SYSTEM PRESSURE AT THE HIGH
PRESSURE GUN. Incorrect pressure reading may result in:
pump operation at excessive pressures, inconsistent chemical
draw or possible damage to the pump or unloader.

TORQUE CHART
7192 - 7193 PARTS LIST Pump Item Thread Tool Size Torque
ITEM P/N MATL DESCRIPTION MODEL USED QTY. [Part No.] in. lbs. ft. lbs. Nm
471 — BB Collar, Adjustment All Models 1
472 — BB Barb, Hose All Models 1 Outer Bearing Case Screw M6 M10 Hex/Phil. 50 4.0 5.4
473 — NBR O-Ring, Hose Barb All models 1 [25082]
474 33500 S Spring All Models 1
Inner Bearing Case Screw M6 M10 Hex/Phil. 50 4.0 5.4
475 — BB Retainer, Ball Seat All Models 1
476 33504 FPM O-Ring, Retainer All Models 1 [25082]
477 34620 SS Ball (1/4") All Models 1 Manifold Screw M8 M6 Allen 115 9.58 13
478 33501 SS Spring All Models 1 [30941]
479 32372 S Orifice, Injector (1.8mm) 7192 1
32373 S Orifice, Injector (2.1mm) 7193 1 Plunger Rod Nut M6 M10 Hex 55 4.6 6.2
480 — BB Body-Unloader Mount All Models 1 [25082]
481 33481 BBNY Adjustable Barb Assy All Models 1
(Inclds: 471-478) Bubble Oil Gauge M28 Oil Gauge Tool 45 3.6 5
482 13969 NBR O-Ring, Body - 70D All Models 1 [44050]
MATERIAL CODES (Not Part of Part Number): BB=Brass BBNY= Brass/Nylon Mounting Screws
FPM=Fluorocarbon NBR=Medium Nitrile (Buna-N) S=304SS SS=316SS
Adapter Plate to Gas Engine 5/16-24 1/2" Hex 90 7.2 10
7233 - 7235 PARTS LIST Pump to Adapter Plate 3/8-16 9/16" Hex 110 9.0 12
ITEM P/N MATL DESCRIPTION MODEL USED QTY. Pump to Electric Motor 3/8-16 9/16" Hex 110 9.0 12
472 33505 BB Barb, Hose All Models 1
476 33504 FPM O-Ring, Retainer All Models 1
477 34620 SS Ball (1/4") All Models 1
478 33501 SS Spring All Models 1
479 32073 SSS Orifice, Injector (2.1 mm) 7233 1
32072 SSS Orifice, Injector (1.8 mm) 7235 1
480 — BB Body-Unloader Mount — 1
481 33480 BB Fixed Barb Assembly All Models 1
(Inclds: 472,476,477,478)
482 13969 NBR O-Ring, Body -70D All Models 1
Italics are optional items
MATERIAL CODES (Not Part of Part Number): BB=Brass FPM=Fluorocarbon
NBR=Medium Nitrile (Buna-N) SS=316SS SSS=416SS
 MOTOR SPECIFICATIONS
Model 8050 Model 8055 ★ Model 8060 Common Motor Specifications
Horsepower ................. 1.5 Horsepower ................. 3.0 Horsepower ................. 1.5 Max. Ambient Temp.................... 104°F
Shaft Diameter............. 5/8" Shaft Diameter............. ● 3/4" Shaft Diameter............. 5/8" Hertz ........................................... 60 Hz
Max. Volts .................... 115/230 Max. Volts .................... 208/230 Max. Volts .................... 115/230 Capacitor Start ........................... Yes
FULL LOAD AMPS ...... 12.1 FULL LOAD AMPS ...... 15.2/13.6 FULL LOAD AMPS ...... 14.0/7.0 Thermal Overload-Manual Reset Yes
RPM............................. 3450 RPM............................. 3450 RPM............................. 1725 U.L. Construction Reference
Weight ......................... 32.1 lbs. Weight ......................... 46.3 lbs. Weight ......................... 40 lbs. (8050,8055)................................. E49747
Phase .......................... Single Phase .......................... Single Phase .......................... Single (8052, 8057, 8060, 8062) ............ E44549
Frame Size .................. 56-C TEFC Frame Size .................. 56-C TEFC Frame Size .................. 56-C TEFC U.L. Insulation Reference (All) ... E37878
Service Factor ............. 1.15 Service Factor ............. 1.15 Service Factor ............. 1.2 CSA Reference
● Use 3/4" shaft size motor with GES Pumps. (8050) ......................................... LR45148
(8052, 8057, 8060, 8062)........... LR4642
★ Model 8052 Model 8057 ★ Model 8062 (8055) ......................................... LR2025
Horsepower ................. 2.0 Horsepower ................. 5.0 Horsepower ................. 2.0
Shaft Diameter............. 5/8" Shaft Diameter............. ● 3/4" Shaft Diameter............. 5/8" Note:Motor Start-Up AMPS may vary, then settle
Max. Volts .................... 115/230 Max. Volts .................... 230 Max. Volts .................... 115/230 within FULL LOAD AMPS rating after initial
FULL LOAD AMPS ...... 17.0/9.2-8.5 FULL LOAD AMPS ...... 22.0 FULL LOAD AMPS ...... 17.0/8.5 run in time.
RPM............................. 3450 RPM............................. 3450 RPM............................. 1725 ★ ★ Before mounting pump on motor, apply P.N.
Weight ......................... 32.5 lbs. Weight ......................... 40 lbs. Weight ......................... 43.7 lbs. 6106 Antiseize Lubricant to pump shaft.
Phase .......................... Single Phase .......................... Single Phase .......................... Single ★ ★ Refer to Tech Bulletin 055 for instructions on
Frame Size .................. 56-C TEFC Frame Size .................. 56-C OPEN DRIP Frame Size .................. 56-C TEFC removing pump from gas engine or electric
Hertz ............................ 60 Service Factor ............. 1.15 Service Factor ............. 1.15 motor.
Service Factor ............. 1.15 ● Use 3/4" shaft size motor with GES Pumps.

For warranty consideration contact CAT PUMPS for the local Authorized Service Center. If you are uncertain as to the cause of failure (Pump or Motor),
secure Returned Goods Authorization number and return complete assembly PREPAID to CAT PUMPS for evaluation.

ELECTRIC HORSEPOWER REQUIREMENTS DETERMINING THE REQUIRED H.P.

Pressure GPM x PSI Electric Brake
ES, ELS, GES PSI PSI PSI PSI Pump =
Flow 1000 1200 1500 2000 RPM 1460 H.P. Required
GPM L/M BAR BAR BAR BAR Consult your engine supplier for proper gas or diesel engine selection.
70 85 105 140
2.2 8.3 1.5 1.8 2.3 3.0 3450
2.85 10.8 2.0 2.3 2.9 — 1725 MOTORIZED PUMPING UNITS
3.0 11.4 2.1 2.5 3.1 4.2 3450
3.5 13.2 2.4 2.9 3.6 4.8 3450 Model...... 2SFX20ESD 2SFX22ESD2 2SFX29ELSD2 2SFX30GESD3
GS, GZ PSI PSI PSI PSI Pump Weight .... 43.9 lbs. 44.3 lbs. 55.5 lbs. 58.1 lbs.
Flow 1200 1500 2000 2500 RPM
Dimensions
GPM L/M BAR BAR BAR BAR
85 105 140 175 Length .... 18.21" 19.21" 19.21" 20.71"
2.5 9.5 2.1 2.6 3.4 4.3 3450 Width ...... 7.36" 7.36" 7.36" 7.36"
3.0 11.4 2.5 3.1 4.2 5.2 3450 Height ..... 9.14" 9.14" 9.14" 9.14"

2SFX DIMENSIONAL

★ Dual Capacitor on top and front side electrical box

World Headquarters CAT PUMPS (U.K.) LTD.

1 Fleet Business Park, Sandy Lane, Church Crookham
CAT PUMPS FLEET, Hampshire, GU52 8BF, England
1681 - 94th Lane N.E. Minneapolis, MN 55449 - 4324 Phone Fleet 44 1252-622031 — Fax 44 1252-626655
e-mail: [email protected]
Phone (763) 780-5440 — FAX (763) 780-2958 N.V. CAT PUMPS INTERNATIONAL S. A.
e-mail: [email protected] Heiveldekens 6A, B-2550 Kontich, Belgium
www.catpumps.com The Pumps with Nine Lives Phone 32- 3- 450.71.50 — Fax 32-3- 450.71.51
e-mail: [email protected] www.catpumps.be
International Inquiries CAT PUMPS DEUTSCHLAND GmbH
FAX (763) 785-4329 Buchwiese 2, D-65510 Idstein, Germany
Phone 49 6126-9303 0 — Fax 49 6126-9303 33
e-mail: [email protected] e-mail: [email protected] www.catpumps.de

PN 993103 Rev D 7723