Surface Mount JPS-2-1+

Power Splitter/Combiner JPS-2-1

2 Way-0° 50Ω 1 to 500 MHz
Maximum Ratings Features
Operating Temperature -40°C to 85°C • low insertion loss, 0.25 dB typ. Generic photo used for illustration purposes only
Storage Temperature -55°C to 100°C
• excellent insertion loss flatness, 0.3 dB peak to peak
• excellent amplitude unbalance, 0.1 dB typ. CASE STYLE: BH292
Power Input (as a splitter) 1W max. • very good phase unbalance, 0.1 deg. typ. +RoHS Compliant
Internal Dissipation 0.125W max. • J-leads for excellent solderability and strain relief The +Suffix identifies RoHS Compliance. See our web site
Permanent damage may occur if any of these limits are
for RoHS Compliance methodologies and qualifications
exceeded.
Applications
• VHF receivers/transmitters
Pin Connections • instrumentation
SUM PORT 1
PORT 1 3 Electrical Specifications
PORT 2 4 FREQ. ISOLATION INSERTION LOSS (dB) PHASE AMPLITUDE
GROUND 6 RANGE (dB) ABOVE 3.0 dB UNBALANCE UNBALANCE
(MHz) (Degrees) (dB)
NOT USED 2,5
L M U L M U L M U L M U
fL-fU Typ. Min Typ. Min Typ. Min Typ. Max. Typ. Max. Typ. Max. Max. Max. Max. Max. Max. Max.

Outline Drawing 1-500 34 20 30 20 27 20 0.2 0.8 0.25 0.7 0.4 0.9 1.0 2.0 3.0 0.1 0.2 0.3

L = 1-10 MHz M = 10-250 MHz U = 250-500 MHz

Typical Performance Data

PCB Land Pattern
Frequency Total Loss1 Amplitude Isolation Phase VSWR VSWR VSWR
(MHz) (dB) Unbalance (dB) Unbalance S 1 2
(dB) (deg.)
S-1 S-2
1.00 3.36 3.29 0.06 29.23 0.10 1.07 1.30 1.30
5.00 3.23 3.18 0.05 34.66 0.09 1.09 1.21 1.21
30.00 3.20 3.14 0.05 32.92 0.05 1.10 1.19 1.20
Suggested Layout, 50.00 3.21 3.16 0.05 32.19 0.17 1.11 1.19 1.20
Tolerance to be within ±.002 70.00 3.22 3.16 0.06 31.58 0.09 1.11 1.19 1.19
100.00 3.25 3.17 0.08 30.87 0.02 1.12 1.19 1.19
130.00 3.26 3.19 0.08 30.21 0.09 1.12 1.19 1.19
160.00 3.29 3.19 0.11 29.71 0.02 1.13 1.19 1.19
190.00 3.29 3.20 0.10 29.18 0.07 1.14 1.19 1.19
230.00 3.33 3.24 0.09 28.58 0.11 1.15 1.18 1.19
290.00 3.37 3.25 0.12 27.91 0.04 1.16 1.18 1.18
Outline Dimensions ( inch
mm )
340.00
400.00
3.40
3.42
3.30
3.30
0.10
0.12
27.53
27.41
0.02
0.01
1.17
1.18
1.18
1.18
1.18
1.18
A B C D E F G 460.00 3.49 3.38 0.11 27.55 0.16 1.20 1.18 1.18
.280 .310 -- .100 .225 .055 .100 500.00 3.52 3.39 0.13 27.81 0.32 1.21 1.19 1.19
7.11 7.87 -- 2.54 5.72 1.40 2.54 1. Total Loss = Insertion Loss + 3dB splitter loss.

H J K L wt JPS-2-1 JPS-2-1
.047 .065 .065 .300 grams TOTAL LOSS ISOLATION
4.0 40
1.19 1.65 1.65 7.62 0.45
S-1(dB) S-2(dB)
3.8
TOTAL LOSS (dB)

35
ISOLATION (dB)

3.6
Demo Board MCL P/N: TB-48+ 30
Suggested PCB Layout (PL-035) 3.4
25
3.2

3.0 20
0 100 200 300 400 500 0 100 200 300 400 500
FREQUENCY (MHz) FREQUENCY (MHz)
JPS-2-1
VSWR
1.5
#S-VSWR #1-VSWR #2-VSWR
1.4 electrical schematic
1.3
VSWR

1.2

1.1

1.0
0 100 200 300 400 500
FREQUENCY (MHz)
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
REV. E
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
M151107
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
JPS-2-1

Mini-Circuits
® ED-7773/2
DY/TD/CP/AM
200413
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 1