Scribd
Upload
18 views

Fator - Torque Value

This document provides suggested torque values for bolts according to EN 14339 for preloading assemblies with a grade of 10.9. It includes values calculated using friction coefficients of 0.10, 0.12, and 0.16. The values given are the minimum and maximum torque that can be applied based on standard EN 14399-4. The document states that other k values and torques can be used, and it is up to the final user to decide which value is appropriate.

Uploaded by

mahmoud fawzy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views

Fator - Torque Value

This document provides suggested torque values for bolts according to EN 14339 for preloading assemblies with a grade of 10.9. It includes values calculated using friction coefficients of 0.10, 0.12, and 0.16. The values given are the minimum and maximum torque that can be applied based on standard EN 14399-4. The document states that other k values and torques can be used, and it is up to the final user to decide which value is appropriate.

Uploaded by

mahmoud fawzy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

C/ Catalunya No.11 – Pol. Ind.

Can Oller
08130 Santa Perpètua de Mogoda BARCELONA
Tel. + 34 93 692 97 11 Fax. + 34 93 692 98 12
www.tindsa.com [email protected]

Barcelona 16/07/2018

Suggested, not mandatory, torque values for bolts EN 14339 for preloading assemblies grade
10.9:
This document includes some values of torque based on K 0.10, 0.12 and 0.16, minimum
and maximum values related to K1 condition of EN 14399-4. Other values with different K values
can be used.
The final decision about which k value or torque to use is decision of the final user.

M 12: EN 14399-1 *: M A = 70.80 N*m Fp. Cd= 59 KN


M 14: EN 14399-1 *: M A = 112.7 N*m Fp. Cd= 80.5 KN
M 16: EN 14399-1 *: M A = 176 N*m Fp. Cd= 110 KN
M 18: EN 14399-1 *: M A = 241.92 N*m Fp. Cd= 134.4 KN
M 20: EN 14399-1 *: M A = 343 N*m Fp. Cd= 171.5 KN
M 22: EN 14399-1 *: M A = 466 N*m Fp. Cd= 212.1 KN
M 24: EN 14399-1 *: M A = 593.04 N*m Fp. Cd= 247.1 KN
M 27: EN 14399-1 *: M A = 867.51 N*m Fp. Cd= 321.3 KN
M 30: EN 14399-1 *: M A = 1178.10 N*m Fp. Cd= 392.7 KN
M 36: EN 14399-1 *: M A = 2058.84 N*m Fp. Cd= 571.9 KN
Values calculated using a friction coefficient = 0.10

M 12: EN 14399-1 *: M A = 84.96 N*m Fp. Cd= 59 KN


M 14: EN 14399-1 *: M A = 134.24 N*m Fp. Cd= 80.5 KN
M 16: EN 14399-1 *: M A = 211. 2N*m Fp. Cd= 110 KN
M 18: EN 14399-1 *: M A = 290.30 N*m Fp. Cd= 134.4 KN
M 20: EN 14399-1 *: M A = 471.16 N*m Fp. Cd= 171.5 KN
M 22: EN 14399-1 *: M A = 559.94 N*m Fp. Cd= 212.1 KN
M 24: EN 14399-1 *: M A = 711.64 N*m Fp. Cd= 247.1 KN
M 27: EN 14399-1 *: M A = 1041.01 N*m Fp. Cd= 321.3 KN
M 30: EN 14399-1 *: M A = 1413.72 N*m Fp. Cd= 392.7 KN
M 36: EN 14399-1 *: M A = 2470.60N*m Fp. Cd= 571.9 KN
Values calculated using a friction coefficient = 0.12
C/ Catalunya No.11 – Pol. Ind. Can Oller
08130 Santa Perpètua de Mogoda BARCELONA
Tel. + 34 93 692 97 11 Fax. + 34 93 692 98 12
www.tindsa.com [email protected]

Values calculated using a friction coefficient = 0.16.

Technical dep
www.fator.es

You might also like