Scribd
Upload
193 views2 pages

MECH-ND-2020-ME 8694-Hydraulics and Pneumatics-930483875-X10710 (ME8694) HYDRAULICS AND PNEUMATICS

This document is a question paper for an examination in Mechanical Engineering on the topic of hydraulics and pneumatics. It contains 3 parts with multiple choice and numerical answer questions. Part A contains 10 short answer questions worth 2 marks each about fluid power applications, components, and circuits. Part B has 5 longer answer questions worth 13 marks each, asking about pump and motor types, hydraulic circuits, and pneumatic components. Part C is a single 15 mark question about designing fluid circuits for machine operations or sequencing multiple cylinders automatically. Students are required to answer all questions, drawing diagrams where needed, in their responses.

Uploaded by

Dharma Raja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
193 views2 pages

MECH-ND-2020-ME 8694-Hydraulics and Pneumatics-930483875-X10710 (ME8694) HYDRAULICS AND PNEUMATICS

This document is a question paper for an examination in Mechanical Engineering on the topic of hydraulics and pneumatics. It contains 3 parts with multiple choice and numerical answer questions. Part A contains 10 short answer questions worth 2 marks each about fluid power applications, components, and circuits. Part B has 5 longer answer questions worth 13 marks each, asking about pump and motor types, hydraulic circuits, and pneumatic components. Part C is a single 15 mark question about designing fluid circuits for machine operations or sequencing multiple cylinders automatically. Students are required to answer all questions, drawing diagrams where needed, in their responses.

Uploaded by

Dharma Raja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

*X10710* Reg. No.

Question Paper Code : X10710


B.e./B.tech. Degree Examinations, November/december 2020 and
april/may 2021
Fifth/Sixth Semester
Mechanical Engineering
me 8694 – hydraulics and pneumatics
(Common to Manufacturing Engineering/Mechanical Engineering (Sandwich)/
Robotics and Automation)
(Regulations 2017)

Time : Three Hours Maximum : 100 Marks

Answer all questions

Part – A (10×2=20 Marks)

1. List the application of fluid power.


2. Why the Fluid Power System is called muscle of Industry ?
3. Explain the term cylinder cushioning.
4. What is the difference between pressure relief valve and pressure reduce valve ?
5. What is the function of intensifier ? Mention the application.
6. What is the advantages of using sequencing circuit ?
7. Define fluidics.
8. What is FRL Unit and give the standard graphical symbol for FRL unit ?
9. Explain the low cost automation.
10. Describe the important component of hydraulic power pack.

Part – B (5×13=65 Marks)


11. a) List out the selection procedure of oil in Industrial hydraulic application.
(OR)
b) What is the difference between a fixed displacement pump and variable
displacement pump ? Explain with neat sketch construction and working of
external gear pump.
X 10710 *X10710*

12. a) Explain the construction, working of gear type motor and vane type motor.
(OR)
b) Explain any three types of special cylinder used in hydraulics with neat sketch.

13. a) Draw and explain the Air-over-oil circuit used in the hydraulic circuit.
(OR)
b) With help of circuit diagram explain types and applications of accumulator.

14. a) Explain with ANSI symbols a) All the types of Actuators used in pneumatics
b) Quick exhaust valve and 5/2 direction control valve.
(OR)
b) With the aid of circuit diagram explain the working principle of impulse
operation circuit in pneumatics.

15. a) How would you describe the failure and trouble shooting is carried out in
hydraulic system.
(OR)
b) How would you show and describe a hydraulic circuit to actuate a shaping
machine ram. Incorporate the following features in the circuit. i) Rapid tool
approach ii) Slow cutting and iii) Rapid tool retraction/return.

Part – C (1×15=15 Marks)

16. a) Design and explain the fluid power circuit for a drilling machine to discuss
the following functions, (i) Clamping the work piece (ii) drilling the work
piece (iii) unclamping the work piece.
(OR)
b) Three pneumatic cylinders A, B, C are used in an automatic sequence of
operation. A cylinder extends, B cylinders extends, B cylinder retracts, and
then A cylinder retracts, C cylinder extends and C cylinder retracts develop
pneumatic circuit by cascade method. Sketch also travel step diagram and
explain briefly.

–––––––––––––

You might also like