EU-Type Examination Certificate

1. EU-TYPE EXAMINATION CERTIFICATE

2. Equipment or Protective System Intended for use in Potentially Explosive Atmospheres
Directive 2014/34/EU

3. EU-Type Examination Certificate Number: ITS09ATEX26868X Issue 6

4. Product: iCAM502 Intrinsically Safe Digital Camera

5. Manufacturer: Extronics Limited

6. Address: 1 Dalton Way

Midpoint 18, Middlewich
Cheshire, CW10 0HU, United Kingdom

7. This product and any acceptable variation thereto is specified in the schedule to this certificate and the
documents therein referred to.

8. Intertek Testing and Certification Limited, Notified Body number 0359 in accordance with Article 17
of Directive 2014/34/EU of the European Parliament and of the Council dated 26 February 2014,
certifies that the product has been found to comply with the Essential Health and Safety
Requirements relating to the design and construction of products intended for use in potentially
explosive atmospheres given in Annex II to the Directive.

In accordance with Article 41 of Directive 2014/34/EU, EC-Type Examination Certificate referring to

94/9/EC that were in existence prior to the date of application of 2014/34/EU (20 April 2016) may be
referenced as if they were issued in accordance with Directive 2014/34/EU. New issues of such EC-
Type Examination Certificates, and Supplementary Certificates to such certificates, may continue to
bear the original certificate number issued prior to 20 April 2016.

The examination and test results are recorded in confidential Intertek Report Ref 102698719LHD-001
Issue 1 dated January 2017.

9. Compliance with the Essential Health and Safety Requirements has been assured by compliance with
EN 60079-0:2009, EN 60079-11:2007, EN 60079-26:2007 and EN 50303:2000 except in respect of
those requirements referred to at item 16 of the Schedule.

10. If the sign “X” is placed after the certificate number, it indicates that the product is subject to Specific
Conditions of Safe Use specified in the Schedule to this certificate.

11. This EU-Type Examination Certificate relates only to the design and construction of the specified
product. Further requirements of the Directive apply to the manufacturing process and supply of this
product. These are not covered by this certificate.

12. The marking of the product shall include the following:

II 1 G Ex ia IIB T4/T3 Ga -20°C ≤ Ta ≤ +60°C

II 2 G Ex ia IIC T4/T3 Gb -20°C ≤ Ta ≤ +60°C
I M1 Ex ia I Ma 0°C ≤ Ta ≤ +60°C

Intertek Testing & Certification Limited A T Austin

Intertek House, Cleeve Road, Leatherhead, Surrey, KT22 7SB Certification Officer
th
Tel: +44 (0)1372 370900 Fax: +44 (0)1372 370977 27 January 2017
www.intertek.com
Registered No 3272281 Registered Office: Academy Place, 1-9 Brook Street, Brentwood, Essex,
CM14 5NQ.

Page 1 of 4
This certificate may only be reproduced in its entirety and without any change, schedule included and is
subject to Intertek Testing and Certification’s Conditions for Granting Certification.
EU-Type Examination Certificate

SCHEDULE

EU-TYPE EXAMINATION CERTIFICATE NUMBER ITS09ATEX26868X Issue 6

13. Description of Equipment or Protective System

The Extronics Limited iCAM502 is intrinsically safe digital camera with a voice recording function. It
comprises an anti-static PC/ABS enclosure housing an assembly of 3 PCB's; a CPU board, a keypad
board and an LED flash board. The CPU and keypad PCB stack is encapsulated along with the
camera lens assembly. The LED flash board is soldered to the encapsulated board assembly and the
LED flash units are encapsulated.

The camera is powered by 2 off AA alkaline cells connected in series and housed within the camera’s
battery compartment, accessible by a cover opened by a quarter turn screw. The AA alkaline cells are
spark ignition safe for gas group IIC and Temperature Class T4 or T3 depend of type of cell used and
the upper ambient temperature of +60°C. Changing the batteries in Group II hazardous areas is
permitted.
The iCAM502 camera may also be used in Group I applications, with reduced ambient temperature
range 0°C ≤ Ta ≤ +60°C with respect to Special Conditions of Use.

Underneath the battery compartment cover is a USB port for the purposes of offloading picture or other
data or for programming the camera. The unit may be connected to any PC or similar device with a
USB port.

USB Interface: Um = 250V ac

14. Report Number

Intertek Report Ref 102698719LHD-001 Issue 1 dated January 2017.

15. Special Conditions of Certification

(a). Specific Conditions of Safe Use

• For Group II applications only, the user shall not carry more than a maximum of 2 spare
approved AA Cells into the hazardous area. Precautions shall be taken to prevent short
circuiting of un-protected battery terminals. Discharged cells shall be removed from the
hazardous area.
• The Temperature Class for the equipment is determined by type of batteries used:
T4: Duracell MN 1500, Duracell Industrial ID1500
T3: Energizer E91, Panasonic LR6XWA
• For Group I applications, the changing of the batteries in the hazardous area and the
transportation of spare batteries into the hazardous area are not permitted.
• Duracell MN 1500 and Duracell Industrial ID1500 are the only types of battery permitted for
Group I applications.
• The USB port shall only be connected in the non-hazardous area.
• If the camera is damaged in any way, it shall be removed from the hazardous area.

(b). Conditions of Manufacture - Routine Tests

• None.

Page 2 of 4

This Certificate is the property of Intertek Testing and Certification Ltd and is subject to Intertek Testing and
Certification’s Conditions for Granting Certification
EU-Type Examination Certificate

SCHEDULE

EU-TYPE EXAMINATION CERTIFICATE NUMBER ITS09ATEX26868X Issue 6

16. Essential Health and Safety Requirements (EHSRs)

The relevant Essential Health and Safety Requirements (EHSRs) have been identified and assessed in
Intertek Report Ref 102698719LHD-001 Issue 1 dated November 2016.

17. Drawings and Documents

Title: Drawing No.: Rev. Level: Date:

Keypad PCB Schematic 322847 04 24/11/2009
Flash LED board schematic 323507 04 02/03/2012
Keypad PCB BOM (2 sheets) 323878 05 17/07/2012
iCAM501 Flash LED board BOM 323868 04 20/03/2012
Keypad PCB Layout (5 sheets) 323465 07 11/07/2012
Flash LED board PCB Layout (7 sheets) 323508 05 04/05/2012
iCAM502 General Arrangement Drawings (3 sheets) 332002 01 20/03/2012
iCAM502 Main PCB Layout (17 sheets) 330132 01 23/03/2012
iCAM502 Certification Label 333300 01 18/04/2012
iCAM502 Main PCB Schematic (9 sheets) 330423 2 17/10/2016
iCAM502 Main PCB BOM (2 sheets, replaces 329870) 401634 1.3 28/10/2016

18. Details of Certificate changes

Modifications to the product covered under Issue 2 (June 2011):

• Use of alternative flash LED part.

Modifications to the product covered under Issue 3 (September 2011):

• Introduction of alternative enclosure material for model iCAM501U.
• Addition of M1 marking on model iCAM501U.
• Updates to drawings.

Modifications to the product covered under Issue 4 (July 2012):

• Introduction of alternative modified model iCAM502.
• Use of new boards used in iCam502 as alternatives for existing models.
• Introduction of new alternative batteries.
• Addition of T3 marking when used with alternative batteries.
• Updates to drawings.

Modifications to the product covered under Issue 4 (February 2013 Amended):

• The following typographical errors have been corrected.
• Removed the “Procell” description from the Duracell MN1500 battery text.
• Amended drawing number 321407 to be 323868 in the drawing table.

Modifications to the product covered under Issue 5 (April 2014):

• Introduction of alternative camera module for use in iCAM502.
• Amended drawing number 401634 Rev 1.2 replacing 329870 Rev 1 to reflect modification of BOM
lists including the alternative camera module.

Page 3 of 4

This Certificate is the property of Intertek Testing and Certification Ltd and is subject to Intertek Testing and
Certification’s Conditions for Granting Certification
EU-Type Examination Certificate

SCHEDULE

EU-TYPE EXAMINATION CERTIFICATE NUMBER ITS09ATEX26868X Issue 6

18. Details of Certificate changes (continued)

Modifications to the product covered under Issue 6 (November 2016):

• Addition of alternative camera with autofocus module.
• Addition of alternative alkaline battery cell, manufactured by Duracell model Industrial ID1500, as a
rebranded from Duracell Procell PC1500.
• Removal of reference to models iCAM501 and iCAM501U as these are no longer manufactured.
• Update to the drawings (see Section 17 for the latest).

Page 4 of 4

This Certificate is the property of Intertek Testing and Certification Ltd and is subject to Intertek Testing and
Certification’s Conditions for Granting Certification

This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and
its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no
liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage
occasioned by the use of this Certificate. Only the Client is authorized to permit copying or distribution of this Certificate and
then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested
material, product or service must first be approved in writing by Intertek.