Datasheet Pneumatic Actuators PA 30 – PA 90
Advantages
- Integrated NAMUR interface
- Fast cycle times
- Wide torque range from 8 Nm up to 3840 Nm
- Very good price-performance ratio for all types
- Easy assembly with various limit switch options
- Low installation heigth
Combinations
Ball Valve Type 546 from d63DN50 to d110DN100
Butterfly Valve Type 567/568 and Type 037/038/039 from d63DN50 to d315DN300
Nominal torque Mdn Control medium
4 Nm (2.9 lb. ft.) up to 1920 Nm (1416 lb. ft.) Neutral, non aggressive gases
Peak torque (Control with fluids on request)
8 Nm (5.9 lb. ft.) up to 3840 Nm (2832 lb. ft.) Allowable humidity
Actuator connection 0 - 95 %
R 1/8 with Namur plate R 1/4 Position indicator
Control time Optical integrated
0.5 - 4s Housing materials
Mode of operation Aluminium hard anodized
Fail safe close (FC) Weight
Fail safe open (FO) 2.022 kg - 34.40 kg
Double acting (DA) Accessories
Control angle Namur connector plate
90 ° 3/2-Way pilot solenoid valve PV94/95
Ambient temperature 3/2 and 5/2-way pilot solenoid valve MNL532
-10 ° to +80 °C 4/2-way solenoid valve 5470
Control pressure in bar Pilot valve cluster PV2000
single acting double acting Electropneumatic positioner DSR500-3
min. 2.8 3 Limit switch box for feedback
max. 7 7 AS-Interface connections
Emergency manual override
1
Combinations
Pneumatic actuated Ball Valves Type 230-235
Actuated valves type 230 - 235 are based on manual ball valve type 546 d16DN10 to
d110DN100 and pneumatic actuators PA11 (DN10-DN25) PA21 (DN32-DN50) or on
PA30-PA45 (DN65-DN100).
Ball Valve Pneumatic Manual Ball Dimensions Materials Standards
Pneumatic Actuator Valve
Type 230 PA 11 - PA 45 Type 546 DN 10 - DN 100 PVC-U, PVC-C, ABS, ISO/DIN
Type 231 PA 11 - PA 45 Type 546 DN 10 - DN 100 PP-H all standards
Type 232 PA 11 - PA 45 Type 546 DN 10 - DN 50 PVDF all standards
Type 233 PA 11 - PA 45 Type 546 DN 10 - DN 100 PVC-U, PVC-C, ASTM/ANSI
Type 234 PA 11 - PA 45 Type 546 DN 10 - DN 100 PVC-U, ABS, BS
Type 235 Type 546 DN 10 - DN 100 PVC-U, PVC-C, PP-H, JIS
PA 11 - PA 45
PVDF
Pneumatic actuated Butterfly Valves
The pneumatic actuated wafer butterfly valve type 240 offer a wide variety of applications.
Due to an optional positioner it can be used as an open / close valve as well as a precise flow
control valve.
The pneumatic actuated Lug Butterfly Valves Type 241/242 offer a wide variety of applications.
Due to an optional positioner it can be used as an open / close valve as well as a precise flow
control valve.
Butterfly Valve Pneumatic Manual Dimensions Materials Standards
pneumatic Actuator Butterfly Valve
Type 240 PA 30 – PA 90 Type 567 DN 50 – DN 300 all all standards
Type 241 PA 30 – PA 90 Type 568 DN 50 – DN 200 All ISO/DIN
Type 242 PA 30 – PA 90 Type 568 DN 50 – DN 200 All ANSI
The metal butterfly valves type 037P / 038P / 039P can be used as open / close or control valve.
The easy installation of the valve between pipe flanges warrants reliable operation and sealing.
The Rilsan®-coating of the valve body and the ductile iron disc provide a high resistance against
corrosion. The butterfly valves are also available in a standard version with stainless steel disc.
Butterfly Valve Pneumatic Manual Dimensions Standards
pneumatic Actuator Butterfly Valve
Type 037P PA 30 - PA 90 Type 037 Wafer style DN 50 - DN 300 all standards
Type 038P PA 30 - PA 90 Type 038 Lug style DN 50 - DN 300 ISO/DIN;
ASTM
Type 039P PA 30 - PA 90 Type 039 Wafer style DN 50 - DN 1200 all standards
2
Exploded view
1. The special design allows high end torques.
2. Special seals and piston guide rings
3. Automatic bolt lubrication
4. ISO/Namur connecting shaft of stainless steel
5. End position damping
6. The cylinder bore is lapped and hard anodized
7. Outer surface is hard anodized
Dimensions
Single acting (FC/FO)
Type D1 D2 D3 D4 D5 L L2 L3 L4 L5 H H1 H2 H3 H4 H5 H6 H7 H8
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
PA30 F03/05 36/50 30 M5/6 1/8” 10 276 11 35 70 - 97 70 21 18 65.5 13 20 36 -
PA35 F05/07 50/70 35 M6/8 1/8” 12 326 14 35 70 - 105 78 21 18 72 13 20 36 -
PA40 F05/07 50/70 35 M6/8 1/8” 12 370 14 35 70 - 129 86 25 21 80.5 13 30 36 -
PA45 F05/07 50/70 55 M6/8 1/8” 15 411 17 35 70 - 139 96 25 21 90 16 30 36 -
PA50 F05/07 50/70 55 M6/8 1/8” 15 423 17 35 70 - 149 106 25 26 101 17 30 36 -
PA55 F07/10 70/102 70 M8/10 1/8” 19 452 22 35 70 - 161 118 25 25 112 19 30 36 -
PA60 F07/10 70/102 70 M8/10 1/8” 19 503 22 35 70 - 173 130 25 32 125 19 30 36 -
PA65 F10/12 102/125 85 M10/12 1/4" - 648 27 - - 32 191 148 24 34 137 - - - 22
PA70 F12 125 85 M12 1/4" - 663 27 - - 32 196 153 24 38 145 - - - 24
PA75 F14 140 100 M16 1/4" - 824 36 - - 32 229 186 24 43 166 - - - 27
PA80 F14 140 100 M16 1/4" - 918 36 - - 32 241 198 24 44 180 - - - 32
Double acting (DA)
Type D1 D2 D3 D4 ( G) D5 L L2 L3 L4 L5 H H1 H2 H3 H4 H5 H6 H7 H8
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
PA30 F03/05 36 25 M5/6 1/8 9 177 9 35 70 - 87 60 25 12 55.5 10 20 36 -
PA35 F03/05 42 30 M5/6 1/8 10 190 11 35 70 - 92.7 66 25 13 60 13 20 36 -
PA40 F03/05 42 30 M5/6 1/8 1 198 11 35 70 - 97 70 21 18 65.5 13 20 36 -
PA45 F05/07 50 35 M6/8 1/8 12 235 14 35 70 - 105 78 21 18 72 13 20 36 -
PA50 F05/07 50 35 M6/8 1/8 12 250 14 35 70 - 129 86 25 21 80.5 13 30 36 -
PA55 F05/07 70 55 M6/8 1/8 15 279 17 35 70 - 139 96 25 21 90 16 30 36 -
PA60 F05/07 70 55 M6/8 1/8 15 341 17 35 70 - 149 106 25 26 101 17 30 36 -
PA65 F07/10 102 70 M8/10 1/8 19 350 22 35 70 - 161 118 25 25 112 19 30 36 -
PA70 F07/10 102 70 M8/10 1/8 19 381 22 35 70 - 173 130 25 32 125 19 30 36 -
PA75 F10/12 125 85 M10/12 1/4 - 416 27 - - 32 191 148 24 34 137 - - - 22
PA80 F12 125 85 M12 1/4 - 466 27 - - 32 197 153 24 38 145 - - - 24
PA85 F14 140 100 M16 1/4 - 555 36 - - 32 229 186 24 43 166 - - - 27
PA90 F14 140 100 M16 1/4 - 581 36 - - 32 241 198 24 44 180 - - - 32
3
Operating Diagram FC, FO, DA
Double acting with Namur 5/2-way valve Single acting with Namur 5/2-way valve Single acting with 3/2-way valve
Torque in relation to control pressure
Torques in Nm Single acting
Type 2.8 bar 4.2 bar 5.6 bar*
Air Spring Air Spring Air Spring
PA30 FC/FO 0° 15.0 10.0 22.5 15.0 30.0 20.0
45 ° 7.5 7.5 11.3 11.3 15.0 15.0
90 ° 10.0 15.0 15.0 22.5 20.0 30.0
PA35 FC/FO 0° 22.5 15.0 33.9 22.5 45.0 30.0
45 ° 11.1 11.1 16.8 16.8 22.5 22.5
90 ° 15.0 22.5 22.5 33.9 30.0 45.0
PA40 FC/FO 0° 30.0 20.0 45.0 30.0 60.0 40.0
45 ° 15.0 15.0 22.5 22.5 30.0 30.0
90 ° 20.0 30.0 30.0 45.0 40.0 60.0
PA45 FC/FO 0° 45.0 30.0 67.5 45.0 90.0 60.0
45 ° 22.5 22.5 33.9 33.9 45.0 45.0
90 ° 30.0 45.0 45.0 67.5 60.0 90.0
PA50 FC/FO 0° 60.0 40.0 90.0 60.0 120.0 80.0
45 ° 30.0 30.0 45.0 45.0 60.0 60.0
90 ° 40.0 60.0 60.0 90.0 80.0 120.0
PA55 FC/FO 0° 90.0 60.0 135.0 90.0 180.0 120.0
45 ° 45.0 45.0 67.5 67.5 90.0 90.0
90 ° 60.0 90.0 90.0 135.0 120.0 180.0
PA60 FC/FO 0° 120.0 80.0 180.0 120.0 240.0 160.0
45 ° 60.0 60.0 90.0 90.0 120.0 120.0
90 ° 80.0 120.0 120.0 180.0 160.0 240.0
PA65 FC/FO 0° 180.0 120.0 270.0 180.0 360.0 240.0
45 ° 90.0 90.0 135.0 135.0 180.0 180.0
90 ° 120.0 180.0 180.0 270.0 240.0 360.0
PA70 FC/FO 0° 240.0 160.0 360.0 240.0 480.0 320.0
45 ° 120.0 120.0 180.0 180.0 240.0 240.0
90 ° 160.0 240.0 240.0 360.0 320.0 480.0
PA75 FC/FO 0° 360.0 240.0 540.0 360.0 720.0 480.0
45 ° 180.0 180.0 270.0 270.0 360.0 360.0
90 ° 240.0 360.0 360.0 540.0 480.0 720.0
PA80 FC/FO 0° 480.0 320.0 720.0 480.0 960.0 640.0
45 ° 240.0 240.0 360.0 360.0 480.0 480.0
90 ° 320.0 480.0 480.0 720.0 640.0 960.0
* Standard series. For reduced torques special springs are available.
4
Torques in Nm Double acting
Type 3 bar 4 bar 5 bar 5.6 bar* 6 bar 7 bar
PA30 DA 0° 16.1 21.4 26.8 30.0 32.1 37.5
45 ° 8.0 10.7 13.4 15.0 16.1 18.8
90 ° 12.0 16.1 20.1 22.5 24.1 28.1
PA35 DA 0° 24.0 32.1 40.2 45.0 48.3 56.4
45 ° 12.0 16.2 20.1 22.5 24.0 28.2
90 ° 18.0 24.3 30.3 34.0 36.3 42.3
PA40 DA 0° 32.1 42.9 53.6 60.0 64.3 75.0
45 ° 16.1 21.4 26.8 30.0 32.1 37.5
90 ° 24.1 32.1 40.2 45.0 48.2 56.3
PA45 DA 0° 48.0 64.2 80.4 90.0 96.6 112.8
45 ° 24.0 32.4 40.2 45.0 48.0 56.4
90 ° 36.0 48.6 60.6 68.0 72.6 84.6
PA50 DA 0° 64.3 85.7 107.1 120.0 128.6 150.0
45 ° 32.1 42.9 53.6 60.0 64.3 75.0
90 ° 48.1 64.3 80.4 90.0 96.4 112.5
PA55 DA 0° 96.0 128.4 160.8 180.0 193.2 225.6
45 ° 48.0 64.8 80.4 90.0 96.0 112.8
90 ° 72.0 97.2 121.2 135.0 145.2 169.2
PA60 DA 0° 128.1 171.4 214.3 240.0 257.1 300.0
45 ° 64.3 85.7 107.1 120.0 128.6 150.0
90 ° 96.4 128.6 160.7 180.0 192.9 225.0
PA65 DA 0° 192.0 256.8 321.6 360.0 386.4 451.2
45 ° 96.0 129.6 160.8 180.0 192.0 225.6
90 ° 144.0 194.4 242.4 270.0 290.4 338.4
PA70 DA 0° 257.1 342.9 428.6 480.0 514.3 600.0
45 ° 128.6 171.4 214.3 240.0 257.1 300.0
90 ° 192.9 257.1 321.4 360.0 385.7 450.0
PA75 DA 0° 384.0 513.6 643.2 720.0 772.8 902.4
45 ° 192.0 259.2 321.6 360.0 384.0 451.2
90 ° 288.0 388.8 484.8 540.0 580.8 676.8
PA80 DA 0° 514.3 685.7 857.1 960.0 1028.6 1200.0
45 ° 257.1 342.9 428.6 480.0 514.3 600.0
90 ° 385.7 514.3 642.9 720.0 771.4 900.0
PA85 DA 0° 768.0 1027.2 1286.4 1440.0 1545.6 1804.8
45 ° 384.0 518.4 643.2 720.0 768.0 902.4
90 ° 576.0 777.6 969.9 1080.0 1161.6 1353.6
PA90 DA 0° 1028.6 1371.4 1714.3 1920.0 2057.1 2400.0
45 ° 514.3 685.8 857.1 960.0 1028.6 1200.0
90 ° 771.4 1028.6 1285.7 1440.0 1542.9 1800.0
5
Torque Characteristics
Single acting
Double acting
Planning Fundamentals
The following link will lead you to the Georg Fischer Planning Fundamentals. These detailed documents will
support you by choosing the right valve for your application.
http://www.gfps.com/content/gfps/com/en/support_and_services/planning_assistance/planning_fundamentals.html?lang=en
6
