Scribd
Upload
38 views2 pages

Gasket Storage Conditions

This document provides storage conditions and lifetimes for various types of gasket materials: 1. It lists the minimum and maximum applied temperatures for different gasket materials including NBR, NBRHT, HNBR, EPDM, HTEPDM, CR, VB, and VG. 2. The initial storage period before inspection/retesting is 3 years for most materials and 5 years for EPDM/HTEPDM/VB/VG. The extended storage period after initial inspection is 2 years for most and 3 years for EPDM/HTEPDM/VB/VG. 3. Proper storage conditions include a dry, dust-free room at 0-40°

Uploaded by

Khawaja Javed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views2 pages

Gasket Storage Conditions

This document provides storage conditions and lifetimes for various types of gasket materials: 1. It lists the minimum and maximum applied temperatures for different gasket materials including NBR, NBRHT, HNBR, EPDM, HTEPDM, CR, VB, and VG. 2. The initial storage period before inspection/retesting is 3 years for most materials and 5 years for EPDM/HTEPDM/VB/VG. The extended storage period after initial inspection is 2 years for most and 3 years for EPDM/HTEPDM/VB/VG. 3. Proper storage conditions include a dry, dust-free room at 0-40°

Uploaded by

Khawaja Javed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Gasket Storage Conditions

Material NBR NBRHT HNBR EPDM HTEPDM CR VB VG


Gasket Applied
MIN -30 -30 -30 -54 -54 -30 -15 -15
Temperature
MAX 110 120 160 150 165 110 180 200

Group Initial Storage Period (Years) Extended Storage Period (Years)


Storage
Lifetim NBR/ NBRHT/ HNBR/ CR 3 2
EPDM/ HTEPDM/ VB/ VG 5 3

Note:

1. Initial storage period: the longest period of time that a


properly packaged rubber product can be stored under
speci ed conditions from the date of manufacture
before the sample needs to be inspected or retested;
2. Extended storage period: After the initial storage
period, properly packaged rubber products need to
undergo further inspection or retest the storage time.


fi

Storage Conditions：

1. The storage room is dry, dust-free, and moderately ventilated; avoid direct sunlight. It is recommended to use red or
orange shades for windows in the storage place;
2. The storage temperature is 0-40℃. If it is transported at low temperature, it must be thawed at a room temperature of
20℃, and care must be taken during transportation and operation to prevent deformation or damage due to the
hardening of the rubber;
3. Ozone equipment, uorescent lamps or strong arti cial power sources with high ultraviolet content, mercury vapor, high-
voltage electrical appliances, electric motors, etc. should not be used in the storage room;
4. The storage of rubber gaskets should avoid their deformation as much as possible. The stored rubber gaskets should
avoid heavy pressure, and should not be stretched or compressed; it is forbidden to hang the rubber gaskets with
strings, iron wires, etc;
5. Conditionally use bags or boxes for storage and the packaging materials must not contain substances that have a
degrading e ect on rubber, so as to reduce air circulation and slow down aging;
6. Separately store gaskets of di erent materials.
ff
fl

ff

fi

You might also like