SPESIFIKASI TEKNIS
ZEISS OPMI Lumera 300 Standard with Integrated Camera
Optics:
Motorized zoom system with apochromatic optics, 1:6 zoom ratio,
Magnification :
magnification factor γ = 0.4x - 2.4x
Focusing : Motorized, focusing range 48 mm
Focal Length of objective lens : f = 200 mm
Illumination:
Red reflex (by dialing different combination between 2° and 6°, you could get
Illumination Technique :
different red reflex effect).
Light Source : LED
Filter protect the patient's eye against unnecessary exposure to radiation (blue
Filters :
light).
Color enhancement, HaMode & Blue-Blocking
Tubes & Co-Observation:
Binocular Tube : 180 degree Tiltable Tube, f = 170mm
Eyepieces : 12.5x Widefield push-in eyepiece with dioptric setting
Video:
Video Camera : Integrated HD Camera (1080p)
Mechanics:
XY Coupling : Traversing range: max. 60 mm x 60 mm
Automatic centering at the push of a button
Weight approx. 3 kg
Suspension Arm : Length: 600 mm
0
Swivel angle: ± 150
Vertical lift: ± 300 mm (height of center position 1434 mm)
Carrier Arm : Length: 500 mm
Swivel angle: ± 3600
Stand Height : 1,735 mm
Base (dimension) : Approx. 600 x 600 mm
Maximum permissible weight load of suspension With complete microscope equipment, including accessories: must not exceed
:
arm 9.5kg for floor stand S200
Total Weight of microscope : OPMI with floor stand S200 approx. 102 kg (without accessories)
Electrical System
Rated Voltage : 100VAC - 240
VAC Current Consumption : max. 60 VA
Rated frequency : 50 – 60 Hz
Fuses : Automatic thermal circuit breaker
Electrical Interface : Power input 100VAC - 240 VAC, max. 5 A
Foot control panel connector
Integrated video unite interface (optional) : HDMI
LED Light Source with temperature sensor : Color Temperature : approx. 4500 K (± 500 K)
Rated power : approx.. 5 W
Retina Protection Filter
Additional Component
UPS : 1000VA, 600 watt; merk APC
Media Recording System & External Storage : Recording System Capacity 1 Tb
External Monitor : LCD Monitor 43 inch