Mu l ti-

ti - DO
D OFF Net
N e tw
work
o r k e d C o n tro l
S y ste
s t em
m In
Instruc
stru c ti
t ions
ons
All rights reserved by Beijing Hollysys Electric Technology Co.,LTD.

When you use our products,if any doubt about the contents of this product
specification,please contact with us.
Beijing Hollysys Electric Technology Co.,LTD (Hollysys Electric Technology for
short)reserves the right without prior notice to modify products and product
specification and other documents of authority.
Hollysys Electric Technology does not assume the use or misuse of the product in
this product specification,caused direct,indirect,special,incidental or
consequential loss or liability.
Hollysys Electric Technology has the products and software patents,copyright and
other intellectual property rights.unauthorized shall not directly or indirectly
copy,manufacture,processing,use of the product and its associated parts.

1 / 11
 Multi-DOF networked control system is completely independent development by
Beijing Hollysys Electric Technology Co,LTD, which consists of CAN(or RS485) and
Ethernet network. The system technology is based on the research achievement of the
key technologies of national science and technology major project. HS series of all-digital
networked servo drive has four national patents ( including three invention patents). The
product is stable,reliable and feature rich.

„ System components

System configuration description

Motion controller Ethernet to CAN bus bidirectional data transfer

（SC-MBOX） Please refer to “SC-MBOX Motion Controller User’s Guide”.

Communication adapter Support 3-way(or 6) CAN communication or RS485

plate（COM-EXT） communication adapter.

Support CAN/RS485/RS232 communications

HS networked servo
Please refer to the “all-digital AC servo drives HS series
drives
Guide”

CAN bus
Communication cable

Achieve motion controller and communication adapter plate CAN

communication
communication connection
cable

HS servo Achieve communication adapter plate to connect CAN/RS485

communication communication of HS servo drive. Each servo drive is equipped

cable with a communication cable.

† SC-MBOX Introduction

SC-MBOX is a motion controller of bi-directional data transfer from Ethernet to CAN bus which is

designed for application of the HS servo networked control. It is a multifunction controller including

RS232/RS485, 12-way digital outputs, 2-way analog outputs, 8-way digital inputs signal interface, etc. the

CAN bus uses electrical isolation techniques to ensure a reliable and safe bus driver.

2 / 11
  

SC-MBOX Motion Controller

† SC-MBOX Features

a. Controlled by CAN(or RS485) bus and two-level networked servo

b. Location information, speed information, the load rate information and control state

information for each servo motor feed back to the host computer.

c. Set the operating parameters of application communication controller according to a

particular condition. Such as initial positioning origin, and a plurality of servo motors can be

adjusted according to the given target position.

d. Built-in 12 digital outputs, 2 analog outputs, 8 digital input signal interface

e. Built-in multiple fault protection measures

NOTE: Please refer to “SC-Mbox Motion Platform System User Manual” for detailed

instructions.

† Communication Adapter Plate

For the SC-MBOX motion controller and HS servo drives communication connections, providing

COM-EXT-3 and COM-EXT-6 which are respectively for 3-axis motion platform and 6-axis motion platform.

The communication adapter plate is installed directly on the 35mm rail, the COM-EXT-3 length is

75mm, the COM-EXT-6 length is 96mm.

3 / 11
Triaxial communications adapter palte COM-EXT-3

Six-axis communications adapter palte COM-EXT-6

4 / 11
 † HS Servo Drive Introduction

HS series networked servo drives are a new generation of cost-effective , practical and reliable

all-digital AC servo motor drives which are launched by Beijing Hollysys Electric Technology CO.,LTD.

HS series servo drives appearance

HS series networked servo drives use the latest 32 TI with floating point capability of dual-core digital

signal processing chip and a new motor control algorithm, which precisely control the position, velocity,

acceleration and output torque of PMSM. It is used in CNC servo control, textile machinery and other

industrial automation industries and fields.

5 / 11
† HS series networked servo drives’ features

a. General motion control functions: position, speed, torque control, mode switch

b. Fast CLA current loop floating point kemel processes, has good performance of dynamic

following.

c. Built-in grid voltage compensation control and automatically adapt to fluctuations of the

grid voltage.

d. Built-in 2-way optional resonance low-pass filter and two resonance notch filter response

to mechanical resonance effectively.

e. Built-in proprietary intelligent regenerative braking control technology

f. Built-in torque observer technology to automatically adapt to changes in load.

g. Control gain or internal adaptive matched

h. Built-in dynamic brake control, to provide additional security for drive.

i. With overload automatic load shedding algorithm and can be parameterized to choose

whether overload protection and automatic smooth load shedding and restoration.

j. Support RS232 and RS485 communication interface, direct communication with the host

computer and touchscreen.

k. Support CAN bus interface and built-in proprietary communication protocol to easy to use

customization.

l. Control port supports logic settings and programmable filter, flexible and reliable.

m. Pulse analog interface: pulse input frequency is up to 1MHZ.

n. 2-way analog outputs can be observed internal state of drive and be convenient on-site

commissioning.

o. Built-in power tube temperature monitoring, overcurrent, overvoltage and overheating

protection to ensure reliable drive.

p. Has history fault records and other reliable management functions.

6 / 11
„ System features
HS series networked servo drives offer three kinds of bus interfaces: RS232, RS485 and CAN bus.

RS232 interface is standard communication interface. RS485 and CAN bus communication interface is

optional, with electrical isolation and transient voltage suppression protection technology and good

electromagnetic compatibility and reliability. RS232 and RS485 communication protocol is a common used

industrial protocols. CAN bus communication protocol is the method of the company with independent

intellectual property rights.

HS networked servo drives enhance the control function in bus mode, support RS232, RS485 and

multiple bus mode control of CAN bus interface. Including:

1. Torque control mode

2. Speed control mode

3. Relative position control mode

4. Absolute position control mode

Standard RS232 interface achieves the point to point communication of touchscreen or HS servo drive

and PC, and monitors HS servo drive status, parameters read mode and bus mode, which is commonly

used in the parameter configuration and operation monitoring of servo drive. You can choose RS485 bus or

CAN bus to achieve HS servo drives networked operation. Generally, CAN bus is flexibility and reliability

and suitable for networked real-time control, and MODBUS communications can carry large packets to be

suitable for less demanding real-time and large capacity parameter passing and data monitoring.

The figure is the HS networked servo drive using CAN bus and SC-MBOX motion controller constitute

a typical architecture of networked control systems.

SC-MBOX and host computer achieve Ethernet communication via switch. SC-MBOX and HS servo

achieve CAN bus communication. In addition, SC-MBOX also achieve MODBUS communication via such

as RS232 interfaces with a local computer or a touch screen to facilitate monitoring and debugging.

Meanwhile, SC-MBOX also provide 8 digital inputs, 12 digital outputs and 2 analog output interface, easy to

implement low-cost digital and analog interfaces for data acquisition and control via Ethernet bus.

7 / 11
 

Multi-DOF Networked Control System

8 / 11
„ Multi-node Network Control Application
CAN bus maximum nodes of each SC-MBOX is related with transmission distance and baud rate.

The common application nodes are 3, 6, 9, 16, and so on. SC-MBOX Ethernet interface is connected

through switch. When a switch port is not enough, can be extended by another switch. In the application,

each SC-MBOX has an ID number which is represented by IP address of the Ethernet, for example:

192.168.1.100. The control node of each SC-MBOX is a whole, external cable requires only a 220V power

cord and an Ethernet network line, which greatly simplifies the implementation of on-site wiring project. In

addition, Ethernet communication uses 10M/100M adaptive way that has a high-speed data transfer,

reliability and large capacity and other characteristics.

Multi-node Network Control Scheme

9 / 11
„ Dimensions（Unit：mm）

SC-MBOX Dimension

HS Series Servo Drive Dimenstion

10 / 11
 Weight L1 L2 L3 L4 L5 L6 L7
Model
(Kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

HS0020A-xxxx 1.8 210 196 77 135 15.5 46 5

HS0040A-xxxx 1.8 210 196 77 135 15.5 46 5

HS0075A-xxxx 2.5 230 216 92 144 23 46 5

HS0100A-xxxx 2.5 230 216 92 144 23 46 5

HS0150A-xxxx 3.75 265 251 102 180 26 50 7

HS0200A-xxxx 3.75 265 251 102 180 26 50 7

HS0250A-xxxx 3.75 265 251 102 180 26 50 7

HS Series Servo Drive Dimension and Weight Data

11 / 11
Add: A-10F,HuiZhi Building,No.9 XueQing Road,
HaiDian District Beijing,100085,China
Tel: (86)-10-62932100
Fax: (86)-10-62927946
Http: //www.syn-tron.com
Ver 12/2013