WASTEWATER TREATMENT PLANT
Dr.Pallavi Das
Assistant Professor
Department of Environmental Science
IGNTU, Amarkantak (M.P.)
Wastewater Treatment
Purpose:
-To manage water discharged from homes, businesses,
and industries to reduce the threat of water pollution.
-Water discharged from homes, businesses, and industry
enters sanitary sewers.
-Water from rainwater on streets enters storm water
sewers.
-Combined sewers carry both sanitary wastes and storm
water
Wastewater Treatment
Pre-treatment
Preliminary treatment
Primary treatment
Secondary treatment
Tertiary Treatment
Wastewater Treatment
Pre-Treatment:
-Occurs in business or industry prior to discharge
-Prevention of toxic chemicals or excess nutrients being discharged
in wastewater.
-Water moves toward the wastewater plant primarily by gravity
flow.
-Lift stations pump water from low lying areas over hills
Preliminary Treatment:
- removes large objects and non-degradable materials
- protects pumps and equipment from damage
- bar screen and grit chamber
Wastewater Treatment
Measurement and sampling at the inlet structure
- a flow meter continuously records the volume of water
entering the treatment plant
- water samples are taken for determination of suspended
solids and B.O.D.
Measurements of Suspended Solids and B.O.D. indicate
the effectiveness of treatment processes
Both Suspended Solids and B.O.D. decrease as water
moves through the wastewater treatment processes
Wastewater Treatment
PRE-LIMINARYTREATMENT
Bar Screen
- catches large
objects that have
gotten into sewer
system such as
bricks, bottles,
pieces of wood, etc.
Preliminary Treatment
Grit Chamber
- removes rocks, gravel, broken glass, etc.
Mesh Screen
- removes diapers, combs, towels, plastic
bags, syringes, etc.
Wastewater Treatment
Preliminary Treatment
Wastewater Treatment
Primary Treatment
PRIMARY TREATMENT
Primary treatment reduces the suspended solids and the
B.O.D. of the wastewater.
From the primary treatment tanks water is pumped to the
trickling filter for secondary treatment.
Sludge from the primary sedimentation tanks is pumped to
the sludge thickener.
- more settling occurs to concentrate the sludge prior to
disposal
Secondary treatment will further reduce the suspended
solids and B.O.D. of the wastewater.
SECONDARY TREATMENT
Secondary treatment is a biological process
Utilizes bacteria and algae to metabolize organic matter in the
wastewater
Secondary treatment systems are classified as Aerobic
suspended –growth treatment and Anaerobic suspended-growth
treatment.
SECONDARY TREATMENT
AEROBIC SUSPENDED –GROWTH TREATMENT
Activated sludge process
Aerated lagoons
Trickling Filter
Aerobic digestion
ANAEROBIC SUSPENDED-GROWTH TREATMENT
Anaerobic filters or fixed-film consists of column filled with
solid media for the treatment of organic matter in sewage.
ACTIVATED SLUDGE PROCESS
Raw Water
Air Treated Water
Clarifier-Settler
Waste
Aeration Tank sludge
To sludge Treatment
Activated sludge process
The effluent from the primary clarifier goes to aeration tank.
Aeration tank also receives microorganisms from the secondary settling
tank known as activated sludge.
Oxygen is pumped into aeration tank for maintaining aerobic conditions.
After few hours of agitation, the waste water goes to secondary settling
tank where solids settle at the bottom .
The sludge is produced, dewatered and disposed off.
Sludge can be used for landfills or disposed off in ocean or used in
croplands, pastures, etc.,
AERATED LAGOONS
Lagooning describes the process of placing effluents in a
shallow impermeable water basin to allow degradation to take
place. This type of containment is used for wastewater with low
organic contents. The cleaning of the effluents takes place as a
result of bacterial action, algae or aquatic vegetation.
Oxygenation for bacterial oxidation of organics comes from
photosynthesis by algae and a bit from wind. CO2 released by
bacteria is used by the algae. Excess biomass and other
settlables are treated by anaerobic bacteria at the bottom.
AEROBIC DIGESTION
Aerobic digestion is an extension of the activated sludge aeration process
whereby waste primary and secondary sludges are continually aerated for long
periods of time.
In aerobic digestion the microorganisms extend into the endogenous
respiration phase, which is a phase where materials previously stored by the
cell are oxidized, with a reduction in the biologically degradable organic
matter. This organic matter, from the sludge cells is oxidized to carbon dioxide,
water and ammonia.
The ammonia is further converted to nitrates as the digestion process
proceed.
The oxygen uptake rate levels off and the sludge matter is reduced to
inorganic matter and relatively stable volatile solids.
The major advantage of aerobic digestion is that it produces a biologically
stable end product suitable for subsequent treatment in a variety of processes.
Volatile solids reductions similar to anaerobic digestion are possible.
Wastewater Treatment
Secondary Treatment
SECONDARY TREATMENT-TRICKLING FILTER
The trickling filter does not “filter” the water.
Water runs over a plastic media and organisms clinging to
the media remove organic matter from the water.
It consist of a bed of crushed stones/pebbles covered with
slime which consists of aerobic bacteria, algae, fungi, protozoa,
worms & insect larvae.
Sewage is degraded by the aerobic bacteria when it passes
through the bed and is collected at the bottom of the filter.
It helps in better removal of organic matter and also keeps the
filter moist when the flow rate is slow
TRICKLING FILTER
The final
clarifiers remove
additional sludge
and further
reduce suspended
solids and B.O.D.
SECONDARY TREATMENT
TERTIARY TREATMENT
To provide final treatment stage to further improve the effluent
quality before it is discharged to the receiving environment (Sea, river,
lake etc).
Sand filtration removes residual suspended matter.
Filtration over activated carbon remove residual matter.
IMPORTANCE OF TERTIARY TREATMENT
To remove total suspended solids and organic matter those are present in
effluents after secondary treatment.
To remove specific organic and inorganic constituents from industrial
effluent to make it suitable for reuse.
To make treated wastewater suitable for land application purpose or
directly discharge it into the water bodies like rivers, lakes, etc.
To remove residual nutrients beyond what can be accomplished by earlier
treatment methods.
To remove pathogens from the secondary treated effluents.
To reduce total dissolved solids (TDS) from the secondary treated effluent
to meet reuse quality standards.
TERTIARY TREATMENT
Nutrient removal (ammonia and phosphorus)
Nitrification/ Dinitrification
Ion exchange
Membrane Process
anaerobic microbiological process with a different microbe
where O2 is toxic (more sludge)
NO3- N2 (escapes to atmosphere)
PO4-3 if not removed in sludge in secondary process
PO4-3 + Al+3 AlPO4 (s) (into sludge)
- aeration to strip N2 and re-oxygenate (add DO).
Phosphorus Removal
A) Physical:
a) filtration for particulate phosphorus
b) membrane technologies
A) Chemical:
a) precipitation
C) Biological: •
a) enhanced biological phosphorus removal (EBPR)
BIOLOGICAL NITRIFICATION
Conversion of Ammonia to Nitrite (Nitrosomonas)
NH4 + + 2 O2 NO2- + 2 H+ + H2O
Conversion of Nitrite to Nitrate (Nitrobacter)
NO2- + 0.5 O2 NO3 -
Denitrification :
Denitrifying bacteria obtain energy from the conversion of
NO3 - to N2 gas
NO3 - + CH3OH + H2CO3 C5H7O2N + N2 + H2O + HCO3-
Organic matter Cell mass
AMMONIA REMOVAL
The most common processes for removal of ammonia from
wastewater are
i) Air stripping
ii) Biological nitrification and denitrification.
Air Stripping
i) It consists of converting ammonium to gaseous phase and
then dispersing the liquid in air, thus allowing transfer of
the ammonia from wastewater to the air.
ii) The most important and efficient reactor for air stripping is
counter current spray tower.
DISINFECTION
1) Uv radiaton :- killing bacteria , virus and other pathogens
. by damaging their genetic structure . • No chemical are
used • More Rapid
2) Ozonation :- Disinfection achieved by formation of free
radicals as oxidizing agents • more effective against
viruses and bacteria then chlorination .
3) Chlorination :- chlorine is used in 2 forms – Cl2 gas form
or hypochlorite tablets.
• Chlorine react with water to form HOCL , which rapidly
dissociate to form hypochlorite ion.
• Chlorine effective against bacteria..
Ion- exchange - Ion exchange can be used in waste water treatment
plants to swap one ion for another for the purpose of demineralization . The
widest application of this process is in domestic water softening.
Membrane process
1) Microfiltration –
Pore sizes 0.01 – 12 um
Capable of removing bacteria , macromolecules .
2) Ultra filtration- Remove organic molecules, virus, bacteria or a molecules
weight above about 800 daltons
Pore size 0.002 -0.03um
3) Nanofiltration:- Allow monlovalent ions such as sodium or potassium to
pass but reject a high proportion of divalent ions such calcium and
magnesium .
Pore sizes are typically 0.001 – 0.01um
Effective for removal of colour – forming organic compounds.
4) Reverse osmosis :- Rejects monovalent ions and organics of molecular
weight > 50 dalton • Pore sizes <0.002um • Used for desalination of sea
water.
SAND FILTER
Sand ,either fine or coarse is generally used as filter media.
They consist of fine sand supported by gravel are used in
water treatment process of water purification.
sand filter is an environmental friendly waste water
treatment process.
Simple to use and inexpensive.
ADVANCED TERTIARY TREATMENT
Disposal of Sludge or Bio-solids
The sludge undergoes lime stabilization (pH is raised by
addition of lime) to kill potential pathogens.
The stabilized sludge is land applied by injection into
agricultural fields