#
SAIC NUMBER ISSUE DATE DISCIPLINE
SAUDI ARAMCO INSPECTION CHECKLIST
BOOM SUPPORTED ELEVATING WORK PLATFORM SAIC-U-7013 1-Jan-23 ELEVATING/LIFTING EQUIPMENNT
PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY
EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO. REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A Remark
No.
1 GENERAL REQUIREMENTS:
ANSI/SAIA A92.5,
1.1 Equipment documentation is available Sec: 4.16.1.1
G.I. 7.030
ANSI/SAIA A92.5,
1.2 Previous inspection reports are checked Sec: 5.11.1.3
G.I. 7.030
GI 7.030
1.3 Daily pre-operational inspection checklists are checked (if applicable)
Para: 5.1.2
Preventive Maintenance is established and updated records are ANSI/SAIA A92.5,
1.4
maintained Sec: 6.4.1
ANSI/SAIA A92.5
1.5 Equipment is operated by a qualified operator
Sec: 4.13.13
Warning notice, cautions or restrictions for safe operation and ANSI/SAIA A92.5
1.6
maintenance are clearly displayed and legible Sec: 4.13.1
A sign is posted warning the operator not to rely solely on any automatic G.I. 7.030
1.7
device as a substitute for safe operating practice Para: 5.6.2
Manufacturer name, address, serial number and model are clearly ANSI/SAIA A92.5
1.8
marked or tagged Sec: 4.13.2
ANSI/SAIA
Safe working load and number of persons are clearly marked on the work
1.9 A92.5,
platform
Sec: 4.13.3
ANSI/SAIA A92.5
1.10 Maximum platform height and reach are clearly marked
Sec: 4.13.4 & 5
ANSI/SAIA A92.5
1.11 Maximum travel height and travel directions are clearly marked
Sec: 4.13.9
ANSI/SAIA A92.5
1.12 Power rating are provided and marked (for AC and/or DC)
Sec: 4.13.6
ANSI/SAIA A92.5
1.13 Platform and guardrails electrical insulation data are provided
Sec: 4.13.10
2 INSPECTION POINTS:
ANSI/SAIA A92.5
2.1 Platform surfaces are at least 18" (width & length) and are slip-resistant
4.12.1
ANSI/SAIA A92.5
2.2 Platform guardrails are provided and secure
4.12.2
ANSI/SAIA A92.5
2.3 Platform guardrails are 42" height (+/- 3")
Sec: 4.12.2.1
ANSI/SAIA A92.5
2.4 Platform toeboard is fitted and at least 4" high
Sec: 4.12.3
Saudi Aramco: Company General Use
#
Saudi Aramco: Company General Use
#
SAIC NUMBER ISSUE DATE DISCIPLINE
SAUDI ARAMCO INSPECTION CHECKLIST
BOOM SUPPORTED ELEVATING WORK PLATFORM SAIC-U-7013 1-Jan-23 ELEVATING/LIFTING EQUIPMENNT
PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY
EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO. REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A Remark
No.
ANSI/SAIA A92.5
2.5 Moving parts are guarded
Sec: 4.11
Personnel on the platform is protected against the hazards of moving ANSI/SAIA A92.5
2.6
parts of the aerial platforms. Sec: 7.10
ANSI/SAIA A92.5
2.7 Access to the platform is provided
Sec: 4.12.4
Access gates or openings shall be properly closed per the manufacturer’s ANSI/SAIA A92.5
2.8
instructions Sec: 4.12.4
ANSI/SAIA A92.5
2.9 Electrical cables, wiring and components are undamaged
Sec:8.3
ANSI/SAIA A92.5
2.10 Safety harness anchorage is fitted in the platform
Sec: 4.12.5.1
ANSI/SAIA A92.5
2.11 Battery is secure, guarded and ventilated
Sec: 4.15.2
Outrigger position microswitches and interlocks are fully functional at their ANSI/SAIA A92.5
2.12
control panel Sec: 4.7
ANSI/SAIA A92.5
2.13 Air, Hydraulic and fuel systems are not leaking
Sec: 6.6.5
ANSI/SAIA A92.5
2.14 Emergency stop button is available at ground control station
Sec: 4.6.3
There are no loose nuts, bolts, missing, worn or damaged parts around ANSI/SAIA A92.5
2.15
the structure Sec: 6.6.2
ANSI/SAIA A92.5
2.16 The equipment is free of defective and/or corroded members/joints
Sec:6.4.3
ANSI/SAIA A92.5
2.17 Working environment is hazard free and machine can be safely operated
Sec:7.9
ANSI/SAIA A92.5
2.18 An hour meter is fitted
Sec:4.15.3
ANSI/SAIA A92.5
2.19 A fire extinguisher is fitted (type depends on operating location)
General
ANSI/SAIA A92.5
2.20 All moving parts are lubricated
Sec: 6.6.5
ANSI/SAIA A92.5
2.21 All fluid levels for oil, water and hydraulic are adequate
Sec: 6.6.5
ANSI/SAIA A92.5
2.22 Platform controls operate the machine correctly
Sec: 6.6.1
ANSI/SAIA A92.5
2.23 Platform controls are clearly marked with direction and mode of operation
Sec: 4.6.1.6
Saudi Aramco: Company General Use
#
Saudi Aramco: Company General Use
#
SAIC NUMBER ISSUE DATE DISCIPLINE
SAUDI ARAMCO INSPECTION CHECKLIST
BOOM SUPPORTED ELEVATING WORK PLATFORM SAIC-U-7013 1-Jan-23 ELEVATING/LIFTING EQUIPMENNT
PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY
EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO. REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A Remark
No.
ANSI/SAIA A92.5
2.24 Platform controls accessible to the operator
Sec: 4.6.1.1
ANSI/SAIA A92.5
2.25 Platform controls return to "off" or "neutral" position when released
Sec: 4.6.1.4
ANSI/SAIA A92.5
2.26 Platform controls are protected against inadvertent operation
Sec: 1.3
ANSI/SAIA A92.5
2.27 Over-ride control for power functions is fitted at ground level control panel
Sec: 4.6.2.1
ANSI/SAIA A92.5
2.28 Lower controls return to "off" or "neutral" position when released
Sec: 4.6.2.4
ANSI/SAIA A92.5
2.29 Lower controls are clearly marked for direction and mode of operation
Sec: 4.6.2.6
ANSI/SAIA A92.5
2.30 Lower controls do not include drive and steering functions
Sec: 4.6.2.2
ANSI/SAIA A92.5
2.31 Lower controls are protected against inadvertent operation
Sec: 4.6.2.5
ANSI/SAIA A92.5
2.32 Boom raise/extend is operable from platform and ground control
Sec: 4.6.2.2
ANSI/SAIA A92.5
2.33 Boom lower/retract is operable from platform and ground control
Sec: 4.6.2.2
ANSI/SAIA A92.5
2.34 Platform rotation is operable from both platform and ground controls
Sec: 4.6.2.2
Emergency stop button is operable from both platform and ground ANSI/SAIA A92.5
2.35
controls Sec: 4.6.3
Auxiliary/emergency lowering is operable from platform and ground ANSI/SAIA A92.5
2.36
controls Sec: 4.6.4
Auxiliary/emergency retracting is operable from platform and ground ANSI/SAIA A92.5
2.37
controls Sec: 4.6.4
Auxiliary/emergency rotating is operable from platform and ground ANSI/SAIA A92.5
2.38
controls Sec: 4.6.4
ANSI/SAIA A92.5
2.39 Hydraulic/Pneumatic systems are leak-free with platform raised
Sec: 4.10.2
Tilt alarm is operable (5 degrees out of level) (manually depress the edge ANSI/SAIA A92.5
2.40
of the tilt switch to cause alarm condition) Sec: 4.7.3
Aerial platforms is fitted with a warning device at the platform which
ANSI/SAIA A92.5
2.41 activates automatically when the aerial platform is at and beyond the
Sec: 4.6.6
slope
Tilt alarm is not combined with boom raise cut-out (dependent on ANSI/SAIA A92.5
2.42
machine manufacturer) Sec: 4.6.6
Saudi Aramco: Company General Use
#
Saudi Aramco: Company General Use
#
SAIC NUMBER ISSUE DATE DISCIPLINE
SAUDI ARAMCO INSPECTION CHECKLIST
BOOM SUPPORTED ELEVATING WORK PLATFORM SAIC-U-7013 1-Jan-23 ELEVATING/LIFTING EQUIPMENNT
PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY
EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO. REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A Remark
No.
Steering is properly working when moving forward and in reverse ANSI/SAIA A92.5
2.43
directions Sec: 6.6.3.1
Brakes are in good working condition and can hold the machine on any ANSI/SAIA A92.5
2.44
slope (parking and moving) Sec: 4.14.1
ANSI/SAIA A92.5
2.45 Extendable axles function is satisfactory (where fitted)
Sec: 7.3.3.8
ANSI/SAIA A92.5
2.46 Outriggers (stabilizers) extension-retraction operation is satisfactory
Sec: 7.10.3
Extendable elevating assembly operation is satisfactory (retracted vs. ANSI/SAIA A92.5
2.47
extended) Sec: 4.2.1
ANSI/SAIA A92.5
2.48 Elevating assembly operation is satisfactory (elevated vs. lowered)
sec: 4.2.1( c )
ANSI/SAIA A92.5
2.49 Wheels and tires are serviceable and undamaged
Sec: 7.3.3 (6)
ANSI/SAIA A92.5
2.50 Travel alarm is operable
Sec: 6.6 (4)
ANSI/SAIA A92.5
2.51 Platform lowering alarm is operable
Sec: 6.6 (4)
ANSI/SAIA A92.5
2.52 Auxiliary power source available (to use in event of primary power loss)
Sec; 4.15.2
ANSI/SAIA A92.5
2.53 Platform does not descend when in raised position and the power is off
Sec: 4.6.3
Machine is safely drivable from the platform when raised (fast, slow, ANSI/SAIA A92.5
2.54
forward and reverse modes) Sec: 6.6.3.1
The platform does not descend when in raised position and the power is ANSI/SAIA A92.5
2.55
off Sec: 4.6.3
ANSI/SAIA A92.5
2.56 Engine powered machines fuel lines are supported to minimize chafing
Sec: 4.15.1
Engine powered machines fuel lines are positioned to minimize exposure ANSI/SAIA A92.5
2.57
to engine and exhaust heat Sec: 4.15.1
ANSI/SAIA A92.5
2.58 Engine powered machines exhaust system is provided with muffler
Sec: 4.15.1
Letter No. CIU-L-
2.59 Installation of Anti- Entrapment device on work platform
019/2016
REMARKS:This check list will be applied for Vehicle Mounted Elevating Work Platform - ANSI/SAIA A92.2.
- Inspected equipment with refrence to ANSI/SAIA A92.5 shall be equipped with Anti- Entrapment device on work platform.
REFERENCE DOCUMENTS:
1- ANSI/SAIA A92.5 - 2014 Issue: Boom - Supported Elevating Work Platforms
2- SAES-B067 - 2020 Issue: Safety Identification and Safety Colors
3- SA GI 7.025 -2018 Issue: Heavy Equipment Operator and Rigger Testing and Certification
Saudi Aramco: Company General Use
#
Saudi Aramco: Company General Use
#
SAIC NUMBER ISSUE DATE DISCIPLINE
SAUDI ARAMCO INSPECTION CHECKLIST
BOOM SUPPORTED ELEVATING WORK PLATFORM SAIC-U-7013 1-Jan-23 ELEVATING/LIFTING EQUIPMENNT
PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY
EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO. REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A Remark
No.
4- SA GI 7.030 - 2023 Issue: Inspection and Testing Requirements for Elevating/Lifting Equipment
Load Tested By (If Applicable):
Name, Signature, & Date:
□ Inspected □ Witnessed by 3rd Party Certified Inspector:
Name, Signature, Certificate No. & Company:
User Representative:
Name, Signature, & Date:
Saudi Aramco: Company General Use
#
Saudi Aramco: Company General Use
