PATROL® Parameter

Reference Manual

Supporting
PATROL
 Contacting BMC Software
You can access the BMC Software Web site at http://www.bmc.com. From this Web site, you can obtain information
about the company, its products, corporate offices, special events, and career opportunities.
United States and Canada Outside United States and Canada
Address BMC Software, Inc. Telephone (01) 713 918 8800
2101 CityWest Blvd.
Houston TX 77042-2827 Fax (01) 713 918 8000
Telephone 713 918 8800 or
800 841 2031
Fax 713 918 8000

Copyright 2004 BMC Software, Inc., as an unpublished work. All rights reserved.
BMC Software, the BMC Software logos, and all other BMC Software product or service names are registered trademarks or trademarks of BMC Software, Inc.
IBM is a registered trademark of International Business Machines Corporation.
DB2 is a registered trademark of International Business Machines Corporation.
Oracle is a registered trademark, and the Oracle product names are registered trademarks or trademarks of Oracle Corporation.
All other trademarks belong to their respective companies.
PATROL® technology holds U.S. Patent Number 5655081.
BMC Software considers information included in this documentation to be proprietary and confidential. Your use of this information is subject to the terms and conditions
of the applicable End User License Agreement for the product and the proprietary and restricted rights notices included in this documentation.

Restricted Rights Legend

U.S. Government Restricted Rights to Computer Software. UNPUBLISHED -- RIGHTS RESERVED UNDER THE COPYRIGHT LAWS OF THE UNITED STATES. Use,
duplication, or disclosure of any data and computer software by the U.S. Government is subject to restrictions, as applicable, set forth in FAR Section 52.227-14, DFARS
252.227-7013, DFARS 252.227-7014, DFARS 252.227-7015, and DFARS 252.227-7025, as amended from time to time. Contractor/Manufacturer is BMC Software, Inc., 2101
CityWest Blvd., Houston, TX 77042-2827, USA. Any contract notices should be sent to this address.
 Customer Support
You can obtain technical support by using the Support page on the BMC Software Web site or by contacting Customer Support by telephone or e-mail. To expedite your
inquiry, please see “Before Contacting BMC Software.”

Support Web Site

You can obtain technical support from BMC Software 24 hours a day, 7 days a week at
http://www.bmc.com/support_home. From this Web site, you can
■ read overviews about support services and programs that BMC Software offers
■ find the most current information about BMC Software products
■ search a database for problems similar to yours and possible solutions
■ order or download product documentation
■ report a problem or ask a question
■ subscribe to receive e-mail notices when new product versions are released
■ find worldwide BMC Software support center locations and contact information, including e-mail addresses, fax numbers, and telephone numbers

Support by Telephone or E-mail

In the United States and Canada, if you need technical support and do not have access to the Web, call 800 537 1813. Outside the United States and Canada, please contact
your local support center for assistance. To find telephone and e-mail contact information for the BMC Software support center that services your location, refer to the
Contact Customer Support section of the Support page on the BMC Software Web site at http://www.bmc.com/support_home.

Before Contacting BMC Software

Before you contact BMC Software, have the following information available so that Customer Support can begin working on your problem immediately:
■ product information
— product name
— product version (release number)
— license number and password (trial or permanent)
■ operating system and environment information
— machine type
— operating system type, version, and service pack or other maintenance level such as PUT or PTF
— system hardware configuration
— serial numbers
— related software (database, application, and communication) including type, version, and service pack or maintenance level
■ sequence of events leading to the problem
■ commands and options that you used
■ messages received (and the time and date that you received them)
— product error messages
— messages from the operating system, such as file system full
— messages from related software
 Contents

Contents
Parameter Tables 1
Latest Information Online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Column Headings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PATROL Adapter for WBEM 1.2.03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PATROL for Baan Applications 1.3.05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PATROL for BEA Tuxedo 6.1.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PATROL for BEA WebLogic 2.3.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
PATROL for Check Point FireWall-1 2.0.01. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
PATROL for Cisco Secure PIX Firewall 1.1.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
PATROL for Compaq Insight Manager 1.5.04 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
PATROL for Compaq NonStop Himalaya Servers 1.2.08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
PATROL for DB2 Universal Database 6.4.20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
PATROL for Dell OpenManage 1.3.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
PATROL KM for Event Management 2.6.00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
PATROL for Informix 9.1.10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
PATROL Integration for DashBoard 1.2.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
PATROL Internet Server Manager 6.2.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
PATROL for iSeries 3.2.10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379
PATROL KM for Log Management 2.0.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403
PATROL for Lotus Domino 4.5.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407
PATROL for Microsoft Exchange Servers 5.0.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 515
PATROL for Microsoft SMS 2.1.01 for Microsoft SMS 1.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607
PATROL for Microsoft SMS 2.1.01 for Microsoft SMS 2.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 619
PATROL for Microsoft Host Integration Server 1.2.03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 635
PATROL for Microsoft SQL Server 4.1.20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 643
PATROL for Microsoft Windows Servers 3.0.03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 685

BMC Software, Inc., Confidential and Proprietary Information

PATROL Parameter Reference Manual Contents i
 PATROL for Microsoft Window Terminal Services 2.1.02. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 857
PATROL for Netware 1.6.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869
PATROL for OpenVMS 2.6.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 905
PATROL for Oracle 8.5.10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 957
PATROL for Oracle E-Business Suite 3.4.02 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1009
PATROL KM for Oracle Parallel Server 8.5.10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1131
PATROL for PeopleSoft 2.0.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1135
PATROL Integration for SAP System Management 1.0.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1199
PATROL for SAP BugsEye 1.0.00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1201
PATROL for SAP Internet Transaction Server 4.3.10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1211
PATROL for SAP Solutions 4.3.50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1221
PATROL for Siebel eBusiness Applications 3.5.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1337
PATROL for Site Monitor/Site Monitor Connector 1.2.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1375
PATROL for Sun Automated Dynamic Reconfiguration (ADR) 1.1.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1423
PATROL for Sybase 10.3.00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1425
PATROL for Unix 9.1.10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1481
PATROL for Web Data Optimizer 1.2.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1533
PATROL for WebSphere Application Server 2.2.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1543
PATROL for WebSphere MQ 4.2.00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1735

Appendix A How To Convert a Parameter Table into a Microsoft Excel File A1

General Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A 1
Access the Files in HTML Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A 1
Copy a Parameter Table from the PPRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A 2
Save a Parameter Table to an Excel File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A 3

Index

BMC Software, Inc., Confidential and Proprietary Information

PATROL Parameter Reference Manual Contents ii
1 Parameter Tables
This book contains a series of tables describing the parameters used in PATROL® by BMC Software. A separate table is provided for
each product, and within each table parameters are grouped by application class and listed alphabetically. A brief description of each
parameter and its default settings are provided.

For additional information about the types of parameters and their functions, see the PATROL for Microsoft Windows Servers User
Guide and the PATROL for Unix User Guide. As a quick source of information on individual parameters, refer to the online Help for
the product.

Latest Information Online

This document is updated periodically and generally contains current information. However, if a product has a release before the
scheduled updating of the book, you may encounter a few discrepancies. Check the version number of the product in the table title,
and remember that the Help always contains the latest information.
Column Headings
The column headings used in all the parameter tables are defined as follows:

Table Column Heading Description

Description states the parameter name and describes the parameter’s function; for consumer
parameters, lists the collector parameters that gather the data displayed by this parameter

Active at indicates whether the parameter is active or inactive by default

Installation

Parameter indicates the parameter type: standard (Std) gathers and displays a single data value;
collector (Coll) gathers multiple data values but has no display capabilities; consumer
Type
(Con) displays values gathered by collector or standard parameters

Border defines the default range for the parameter; can be set so that values that fall outside this
range trigger warnings, alarms, or recovery actions
Range*

Alarm1 specifies the thresholds for the first-level alarm; not applicable to collector parameters
Range*

Alarm2 specifies the thresholds for the second-level alarm; not applicable to collector parameters
Range*

Scheduling specifies how frequently the parameter will run and collect data (polling cycle); not
applicable to consumer parameters
(poll time)

Icon Style specifies whether the parameter is represented as a graph, gauge, text box, stoplight
(signal), or Boolean state

Unit specifies the unit of measure in which the parameter output is expressed, such as a
percentage, a number, or bytes

* Border, Alarm1, and Alarm2 ranges that are also labeled inactive by default may not be recommended ranges for
the parameter.
Abbreviations
The following abbreviations are used throughout the tables.

Abbreviation Description

bool Boolean; shows a state, such as on or off, OK or not OK

coll collector parameter

con consumer parameter

disc discovery; refers to the PATROL discovery process

GB gigabyte or gigabytes

hr hour or hours

kB kilobyte or kilobytes

MB megabyte or megabytes

MHz megahertz

min minute or minutes

msec millisecond or milliseconds

N no; parameter is inactive after KM is installed

NA not applicable; a value cannot be set

nsec nanosecond or nanoseconds

sec second or seconds

std standard parameter

TB terabyte or terabytes

undef undefined; a value can be set, but no default is provided

warn warning; type of alert

Y yes; parameter is active after KM is installed

PATROL Adapter for WBEM 1.2.03

Table 1 PATROL Adapter for WBEM 1.2.03 (Part 1 of 3)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
WBEM Application Class
There are no parameters associated with the WBEM Application Class.
WBEM_CIMOM Application Class
There are no parameters associated with the WBEM_CIMOM Application Class.
WBEM_NAMESPACE Application Class
There are no parameters associated with the WBEM_NAMESPACE Application Class.
WBEM_PROCESS Application Class
PageFaultsPerSec Y con NA undef undef set by coll graph number of page
faults per sec
Displays the number of page faults per second by the
threads executing in this process. A page fault occurs
when a thread refers to a virtual memory page that is not
in the working set of pages in main memory (those pages
recently touched by the threads in the process)..

Collector: ProcessColl
PageFileBytes Y con NA undef undef set by coll graph MB

Displays the current number of bytes this process has

used in the paging file.

Collector: ProcessColl

PATROL Parameter Reference Manual 5

PATROL Parameter Reference Manual 6

Table 1 PATROL Adapter for WBEM 1.2.03 (Part 2 of 3)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PrivTimePercent Y con NA 90–95 95–100 set by coll graph percentage of time
warn alarm this process has spent
Displays the percentage of elapsed time that this process executing code in
has spent executing code in privileged mode. privileged mode

Collector: ProcessColl
ProcessColl Y coll NA NA NA 1 min none none

Collects Process statistics from the Process performance

objects in the Windows NT Performance Database.
ProcessorTimePercent Y con NA 90–95 95–100 set by coll graph percentage of time
warn alarm the selected process
Displays the percentage of elapsed time the selected used the processor to
process used the processor to execute instructions. execute instructions

Collector: ProcessColl
ThreadCount Y con NA undef undef set by coll graph number of threads

Displays the number of threads currently active in this

process.

Collector: ProcessColl
Table 1 PATROL Adapter for WBEM 1.2.03 (Part 3 of 3)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UserTimePercent Y con NA 90–95 95–100 set by coll graph percentage of time
warn alarm process has spent
Displays the percentage of elapsed time that this process executing code in
has spent executing code in user mode. user mode

Collector: ProcessColl
WorkingSet Y con NA undef undef set by coll graph MB

Displays the current number of megabytes in the working

set of this process. The working set is the set of memory
pages recently touched by the threads in the process.

Collector: ProcessColl
WBEM_PROVIDER Application Class
There are no parameters associated with the WBEM_PROVIDER Application Class.

PATROL Parameter Reference Manual 7

PATROL Parameter Reference Manual 8
PATROL for Baan Applications 1.3.05

Table 2 PATROL for Baan Applications 1.3.05 (Part 1 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BAAN_APP_ERRORS_FILTERED Application Class
ErrorCount Y con NA 1–25 26–1000 alarm set by coll graph number of errors
warn
Indicates the number of errors that have occurred that
match at least one search string filter.

Collector: patcol_baan
BAAN_DAEMON Application Class
DaemonStatus Y con NA 1 undef set by coll stop- none
alarm light
Indicates the status of a Baan daemon.

Collector: patcol_baan
BAAN_DBSTATUS Application Class
DbStatus Y con NA 1 undef set by coll stop- none
alarm light
Indicates the status of a Tbase/bisam database
(proprietary Baan database, discontinued in BaanERP).

Collector: patcol_baan
BAAN_HOST_LIC Application Class
LicenseExpiryAlert Y con NA 0–7 8–30 set by coll stop- none
alarm warn light
Indicates that a Baan license will expire soon.

Collector: patcol_baan

PATROL Parameter Reference Manual 9

PATROL Parameter Reference Manual 10

Table 2 PATROL for Baan Applications 1.3.05 (Part 2 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumBshellsFound Y con NA undef undef set by coll graph number of active
sessions
Indicates the number of active sessions (number of
bshells on local and remote hosts).

Collector: patcol_baan
NumBshellsNotFound Y con NA 1–10 11–100 set by coll graph number of baan seats
warn alarm with undetermined
Indicates the number of Baan seats whose status cannot status
be determined (perhaps used by a host not registered in
the PATROL software as a remote host).

Collector: patcol_baan
NumLicSeatsFree Y con NA 0–10 11–25 set by coll graph number of available
alarm warn seats
Indicates the number of available seats.

Collector: patcol_baan
NumLicSeatsLocked Y con NA 1–10 11–500 set by coll graph number of locked
warn alarm seats
Indicates the number of locked seats (difference between
the number of seats in use as shown by license manager,
and the number of seats with corresponding bshell
processes).

Collector: patcol_baan
NumLicSeatsUsed Y con NA undef undef set by coll graph number of registered
seats
Indicates the number of registered seats (seats identified
as in use by the Baan license manager).

Collector: patcol_baan
Table 2 PATROL for Baan Applications 1.3.05 (Part 3 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PercLicSeatsFree Y con NA 0–5 6–10 set by coll graph percentage of
alarm warn available seats
Indicates the percentage of available seats (based on
NumLicSeatsFree).

Collector: patcol_baan
PercLicSeatsLocked Y con NA 5–10 11–100 set by coll graph percentage of locked
warn alarm seats
Indicates the percentage of locked seats (based on
NumLicSeatsLocked).

Collector: patcol_baan
BAAN_JOB_MGMT Application Class
LstJobsOvertime Y con NA undef undef set by coll text none

Lists jobs that exceeded their configured maximum

duration by at least one hour during the last period.

Collector: patcol_baan
LstJobsRTError Y con NA undef undef set by coll text none

Lists jobs that reported runtime errors during the last

period.

Collector: patcol_baan
LstJobsRunning Y con NA undef undef set by coll text none

Lists all jobs currently executing.

Note: If the job daemon dies while running a job, it may

be incorrectly flagged as running.

Collector: patcol_baan

PATROL Parameter Reference Manual 11

PATROL Parameter Reference Manual 12

Table 2 PATROL for Baan Applications 1.3.05 (Part 4 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LstJobsSuccess Y con NA undef undef set by coll text none

Lists all jobs that terminated without error during the last
period.

Collector: patcol_baan
LstJobsTotal Y con NA undef undef set by coll text none

Lists all jobs that ended during the last period.

Collector: patcol_baan
LstLateJobsInQueue Y con NA undef undef set by coll text none

Lists jobs for which the current time exceeds the next
scheduled execution start time by at least one hour.

Collector: patcol_baan
LstWaitingJobs Y con NA undef undef set by coll text none

Lists jobs that will be waiting for at least one hour for the
next scheduled execution start time.

Collector: patcol_baan
NumJobsOvertime Y con NA 1–10 11–100 set by coll graph number of jobs
warn alarm
Indicates the number of jobs that exceeded their
configured maximum duration during the last period.

Collector: patcol_baan
NumJobsRTError Y con NA 1–10 11–100 set by coll graph number of jobs
warn alarm
Indicates the number of jobs that reported errors while
executing during the last period.

Collector: patcol_baan
Table 2 PATROL for Baan Applications 1.3.05 (Part 5 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumJobsRunning Y con NA undef undef set by coll graph number of jobs

Indicates the number of jobs currently executing.

Collector: patcol_baan
NumJobsSuccess Y con NA undef undef set by coll graph number of jobs

Indicates the number of jobs that terminated without

error during the last period.

Collector: patcol_baan
NumJobsTotal Y con NA undef undef set by coll graph number of jobs

Indicates the total number of jobs that ended during the

last period.

Collector: patcol_baan
NumLateJobsInQueue Y con NA 1–10 11–100 set by coll graph number of jobs
warn alarm
Indicates the number of jobs for which the current time
exceeds the next scheduled execution start time by at least
1 hour.

Collector: patcol_baan
NumWaitingJobs Y con NA 1–100 undef set by coll graph number of jobs
warn
Indicates the number of jobs that will be waiting for at
least 1 hour for a next scheduled execution start time.

Collector: patcol_baan

PATROL Parameter Reference Manual 13

PATROL Parameter Reference Manual 14

Table 2 PATROL for Baan Applications 1.3.05 (Part 6 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BAAN_JOBDAEMON Application Class
DaemonStatus Y con NA 1 undef set by coll stop- none
alarm light
Indicates whether the Baan job daemon is operating for a
target Baan company.

Collector: patcol_baan
BAAN_KEY_TABLES Application Class
NumRecords Y con NA 5000–10000 10001–1000000 set by coll graph number of records
warn alarm
Indicates the number of records in a target key table.

Collector: patcol_baan
BAAN_LICDAEMON Application Class
DaemonStatus Y con NA 1 undef set by coll stop- none
alarm light
Indicates whether a Baan license daemon is available.

Collector: patcol_baan
BAAN_LOGS Application Class
ListArchives Y con NA undef undef set by coll text none

Lists log archive directories under $BSE/log.

Collector: patcol_baan
ListLogFiles Y con NA undef undef set by coll text none

Lists nonempty log files in descending order by

modification date.

Collector: patcol_baan
Table 2 PATROL for Baan Applications 1.3.05 (Part 7 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumErrors Y con NA 1–25 26–1000 set by coll graph number of errors
warn alarm
Indicates the number of errors between collection
iterations.

Collector: patcol_baan
BAAN_PRINTING Application Class
LogicalQueueList Y con NA undef undef set by coll stopligh none
t
Lists the status of the device queue for type Logical
Printer.

Collector: patcol_baan
LongestLogical Queue Y con NA 5–10 11–100 set by coll graph number of requests
warn alarm
Indicates the number of pending requests in the longest
logical printer queue.

Collector: patcol_baan
LongestPrinterQueue Y con NA 5–10 11–100 set by coll graph number of requests
warn alarm
Indicates the number of pending requests in the longest
printer queue.

Collector: patcol_baan
PrinterList Y con NA undef undef set by coll text none

Lists the names of all available devices configured as type

Printer.

Collector: patcol_baan

PATROL Parameter Reference Manual 15

PATROL Parameter Reference Manual 16

Table 2 PATROL for Baan Applications 1.3.05 (Part 8 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PrinterQueueList Y con NA undef undef set by coll text none

Lists the status of the device queue for type Printer.

Collector: patcol_baan
BAAN_PROCESSES Application Class
LstCPUIntensive Y con NA undef undef set by coll text none

Lists the Baan-specific operating system processes that

have exceeded predetermined CPU usage thresholds.

Note: The CPU intensive threshold is defined by the Baan

KM Setup => Baan System Setup menu command.

Collector: patcol_baan
LstRunawayProcesses Y con NA undef undef set by coll text none

Lists Baan-specific operating system processes that are

running independent of their parent (spawning) user
session.

Note: Use this parameter to identify stray processes that

may need to be killed to free resources or locks.

Collector: patcol_baan
LstTop10Processes Y con NA undef undef set by coll text none

Lists the top 10 Baan-specific operating system processes

according to CPU usage.

Note: a process can be counted as a top process even if it

does not exceed the CPU intensive threshold set during
configuration.

Collector: patcol_baan
Table 2 PATROL for Baan Applications 1.3.05 (Part 9 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumCPUIntensive Y con NA 1–10 11–100 set by coll graph number of Baan-
warn alarm specific operating
Indicates the number of Baan-specific operating system system processes
processes that exceeded predetermined usage thresholds.

Collector: patcol_baan
NumRunawayProcesses Y con NA 1–5 6–100 set by coll graph number of Baan-
warn alarm specific operating
Indicates the number of Baan-specific operating system system processes
processes that are running independent of their parent
(spawning) user session (see LstRunawayProcesses).

Collector: patcol_baan
Top10CPUProcesses Y con NA undef undef set by coll graph none

Indicates data points for the top processes over time (see
LstTop10Processes).

Note: Click a data point for a listing of the top 10

operating system processes at the corresponding time. If a
process is idle, it does not appear.

Collector: patcol_baan
BAAN_PTR_DAEMON Application Class
DaemonStatus Y con NA 1 undef set by coll stop- none
warn light
Indicates whether a Baan printer daemon is available.

Collector: patcol_baan

PATROL Parameter Reference Manual 17

PATROL Parameter Reference Manual 18

Table 2 PATROL for Baan Applications 1.3.05 (Part 10 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BAAN_SHARED_MEM Application Class
SHMAttachments Y con NA undef undef set by coll graph number of
connections
Indicates connections to shared memory segments; this
does not necessarily equal the number of users.

Collector: patcol_baan
SHMInUse Y con NA 5000–25000 25001–100000 set by coll graph number of KB
warn alarm
Indicates shared memory currently in use.

Collector: patcol_baan
SHMPercInUse Y con NA 75–90 91–100 set by coll graph percentage of shared
warn alarm memory allocated
Indicates the percentage of shared memory allocated
relative to maximum configurable shared memory.

Collector: patcol_baan
SHMRTDataDictLoaded Y con 1–2 1 2 set by coll stop- none
warn alarm light
Indicates whether the Baan objects have been loaded into
shared memory.

Collector: patcol_baan
BAAN_TBASE Application Class
PercBuffers Y con NA 75–90 91–100 set by coll graph percentage of
warn alarm configured Tbase
Indicates the percentage of configured Tbase buffers in buffers in use
use.

Collector: patcol_baan
Table 2 PATROL for Baan Applications 1.3.05 (Part 11 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PercConnections Y con NA 75–90 91–100 set by coll graph percentage of
warn alarm configured
Indicates the percentage of configured connections in use. connections in use

Collector: patcol_baan
PercFiles Y con NA 75–90 91–100 set by coll graph percentage of open
warn alarm configured Tbase
Indicates the percentage of configured Tbase files that are files
open.

Collector: patcol_baan
PercIndexes Y con NA 75–90 91–100 set by coll graph percentage of open
warn alarm configured Tbase
Indicates the percentage of configured Tbase indexes that indexes
are open.

Collector: patcol_baan
PercLocks Y con NA 75–90 91–100 set by coll graph percentage of
warn alarm configured Tbase
Indicates the percentage of configured Tbase locks in use. locks in use

Collector: patcol_baan
BAAN_USERS Application Class
LstBaanUsers Y con NA undef undef set by coll text none

Lists all users currently logged into Baan.

Collector: patcol_baan

PATROL Parameter Reference Manual 19

PATROL Parameter Reference Manual 20

Table 2 PATROL for Baan Applications 1.3.05 (Part 12 of 12)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumBaanUsers Y con NA undef undef set by coll graph number of users

Indicates the number of users (including the job daemon)

currently logged into Baan.

Collector: patcol_baan
NumIdleUsers Y con NA 25–50 51–100 set by coll graph number of users
warn alarm
Indicates the number of idle users on the local host in a
Baan system.

Collector: patcol_baan
PATROL for BEA Tuxedo 6.1.01

Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 1 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
APPS_LOG Application Class
_archiveLog Y std NA NA NA 600 sec none none

Displays results from the previous archive process;

shown only for the TUXEDO user log (ULOG).
_LogDateCheck Y coll NA NA NA 30 sec none none

Checks log file date and archives log if necessary.

LogEvent Y std NA undef undef 24 sec graph number of events

Displays the number of events in the log file matching the

sniff pattern since the pattern was registered for the log
file; only the first occurrence of a sniff pattern in a line is
counted; parameter annotation reflects the text that
matched the registered pattern.
LogDiskFreeSpace Y std NA 5–10 10–10 600 sec gauge percentage of free
warn alarm space
Displays the percentage of free space on the disk where
the log file is located.
LogFileSize Y std NA undef undef 600 sec graph MB

Displays the size of the log file (in megabytes).

LogIncreaseRate Y std NA undef undef 600 sec graph percentage increase
over previous polling
Shows log file increase rate for each collection cycle period
(alarm range can be set to flag abnormally fast increases).

PATROL Parameter Reference Manual 21

PATROL Parameter Reference Manual 22

Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 2 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BEATUX_APPQ Application Class
NumDiskPage Y con NA undef undef set by coll graph number of pages

Indicates the number of disk pages consumed.

Collector: _APPQueueAttriDisc
NumMessages Y con NA undef undef set by coll graph number of messages

Indicates the number of messages in the queue.

Collector: _APPQueueAttriDisc
BEATUX_CLIENT Application Class
_ClntCollector N coll NA NA NA 600 sec none none

Collector parameter for client information.

NumDequeue Y con NA undef undef set by coll graph number of operations

Indicates the number of dequeue operations.

Collector: _ClntCollector
NumEnqueue Y con NA NA NA set by coll graph number of operations

Indicates the number of enqueue operations.

Collector: _ClntCollector
NumRequest Y con NA NA NA set by coll graph number of requests

Indicates the number of requests.

Collector: _ClntCollector
Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 3 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumTranAbt Y con NA NA NA set by coll graph number of requests

Indicates the number of transactions aborted.

Collector: _ClntCollector
NumTranBegun Y con NA NA NA set by coll graph number of
transactions
Indicates the number of transactions started.

Collector: _ClntCollector
NumTranCmt Y con NA undef undef set by coll graph number of
transactions
Indicates the number of transactions committed.

Collector: _ClntCollector
BEATUX_EVENT Application Class
_checkEvent Y coll NA NA NA 60 sec none none

Data collector for the BEATUX_EVENT application class.

ErrorEvent Y con NA undef undef set by coll graph number of events

Indicates the number of error events.

Collector: _checkEvent
InfoEvent Y con NA undef undef set by coll graph number of events

Indicates the number of information events.

Collector: _checkEvent
WarnEvent Y con NA undef undef set by coll graph number of events

Indicates the number of warn events.

Collector: _checkEvent

PATROL Parameter Reference Manual 23

PATROL Parameter Reference Manual 24

Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 4 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BEATUX_GROUP Application Class
_SrvPerfAttrDisc Y coll NA NA NA 600 sec none none

Discovers run-time performance attributes of Tuxedo

application servers.
_serverDisc Y coll NA NA NA 300 sec none none

Discovers information about servers within a group.

GroupStatus Y con NA undef undef set by coll stoplight none

Indicates the status (up or down) of the group.

Collector: groupDisc
BEATUX_MACHINE Application Class
NumDequeue Y con NA undef undef set by coll graph number of operations

Indicates the number of dequeue operations.

Collector: machineDisc
NumEnqueue Y con NA undef undef set by coll graph number of operations

Indicates the number of enqueue operations.

Collector: machineDisc
NumEventPost Y con NA undef undef set by coll graph number of operations

Indicates the number of event post operations.

Collector: machineDisc
NumRequests Y con NA undef undef set by coll graph number of requests

Indicates the number of requests.

Collector: machineDisc
Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 5 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumTranAbt Y con NA undef undef set by coll graph number of
transactions
Indicates the number of transactions aborted.

Collector: machineDisc
NumTranCmt Y con NA undef undef set by coll graph number of
transactions
Indicates the number of transaction committed.

Collector: machineDisc
NumTranInit Y con NA undef undef set by coll graph number of
transactions
Indicates the number of transactions initiated.

Collector: machineDisc
NumWorkCompl Y con NA undef undef set by coll graph number of requests

Indicates the total service load successfully dequeued and

processed.

Collector: machineDisc
NumWorkInit Y con NA undef undef set by coll graph number of requests

Indicates the total service load enqueued by clients/

servers.

Collector: machineDisc
BEATUX_PROCESS Application Class (Windows NT only)
PROCProcessColl Y coll NA NA NA 30 min none none

Collects data for the BEATUX_PROCESS application

class.

PATROL Parameter Reference Manual 25

PATROL Parameter Reference Manual 26

Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 6 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PROCprocPageFaultsPerSec Y con NA undef undef set by coll graph faults per sec

Indicates the number of page faults per second.

Collector: PROCProcessColl
PROCprocPageFileBytes Y con NA undef undef set by coll graph MB

Indicates the number of page file bytes.

Collector: PROCProcessColl
PROCprocPrivTimePercent Y con 0–100 90–95 95–100 set by coll graph percentage of
warn alarm privileged time used
Indicates the percentage of privileged time used.

Collector: PROCProcessColl
PROCprocProcessorTimePercent Y con 0–100 90–95 95–100 set by coll graph percentage of
warn alarm processor time used
Indicates the percentage of processor time used.

Collector: PROCProcessColl
PROCprocThreadCount Y con NA undef undef set by coll graph number of threads

Indicates the process thread count.

Collector: PROCProcessColl
PROCprocUserTimePercent Y con NA undef undef set by coll graph percentage of user
time used
Indicates the percentage of user time used.

Collector: PROCProcessColl
PROCprocWorkingSet Y con NA undef undef set by coll graph MB

Indicates the working set.

Collector: PROCProcessColl
Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 7 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BEATUX_QSPACE Application Class
_APPQueueDisc N std NA NA NA 300 sec none none

Discovers application queue instances within each queue

space.
_APPQueueAttriDisc N std NA NA NA 300 sec none none

Discovers data for attributes of application class.

_QspaceCollector Y coll NA NA NA 600 sec none none

Collects data for the BEATUX_QSPACE application class.

DiskFreeSpace Y std NA 10–10 5–10 600 sec gauge percentage of disk
warn alarm space that is free
Indicates the amount of free disk space.
MsgCapacity Y con 0–100 80–90 90–100 set by coll gauge percentage of queue
warn alarm space
Indicates the percentage of messages contained in the
queue space.

Collector: _QspaceCollector
NumExistingQueue Y con 0–100 undef undef set by coll graph number of queues

Indicates the number of queues existing in the queue

space.

Collector: _QspaceCollector
NumMessageInQueue Y con NA undef undef set by coll graph number of messages

Indicates the number of messages in the queue space.

Collector: _QspaceCollector

PATROL Parameter Reference Manual 27

PATROL Parameter Reference Manual 28

Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 8 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumProcessForQueue Y con NA NA NA set by coll graph number of processes

Indicates the number of processes accessing the queue

space.

Collector: _QspaceCollector
NumQueueExtents Y con NA undef undef set by coll graph number of extents

Indicates the number of extents used by the queue space.

Collector: _QspaceCollector
NumTransactions Y con NA NA NA set by coll graph number of
transactions
Indicates the number of outstanding transactions.

Collector: _QspaceCollector
QspaceFreeDiskSpace Y con NA 10–10 0–10 set by coll gauge percentage of actual
warn alarm free disk space in a
Displays the percentage of actual free disk space in a queue
queue’s allocated queue space.

Collector: _QspaceCollector
BEATUX_QUEUE Application Class
NumReqQueued Y con NA undef undef set by coll graph number of requests

Indicates the number of requests currently enqueued.

Note: If the monitored Tuxedo system uses the MP

Model, or if the Load Balance attribute for the domain is
set to “N“, then this parameter will be inactive.

Collector: QueueAttrDisc
Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 9 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumWrkQueued Y con NA NA NA set by coll graph number of requests

Indicates the amount of work load currently enqueued.

Collector: QueueAttrDisc
QueueCapacity Y con NA undef undef set by coll gauge percentage of
message queue used
Indicates the percentage of the message queue used.

Collector: QueueAttrDisc
ServerCnt Y con NA undef undef set by coll graph number of active
servers
Indicates the number of active servers associated with
this queue.

Collector: QueueAttrDisc
TotalReqQueued Y con NA undef undef set by coll graph number of requests

Indicates the total requests enqueued since active.

Note: If the monitored Tuxedo system uses the MP

Model, or if the Load Balance attribute for the domain is
set to “N“, then this parameter will be inactive.

Collector: QueueAttrDisc
TotalWrkQueued Y con NA NA NA set by coll graph none

Indicates the total work load enqueued since active.

Note: If the monitored Tuxedo system uses the MP

Model, or if the Load Balance attribute for the domain is
set to “N“, then this parameter will be inactive.

Collector: QueueAttrDisc

PATROL Parameter Reference Manual 29

PATROL Parameter Reference Manual 30

Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 10 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BEATUX_SERVER Application Class
_ServiceDisc Y coll NA NA NA 30 min text none

Collector parameter discovers information about services

running on the server.
NumConversation Y con NA undef undef set by coll graph number of
conversations
Indicates the number of conversations initiated.

Collector: SysSrvPerfAttrDisc
NumDequeue Y con NA undef undef set by coll graph number of operations

Indicates the number of dequeue operations initiated.

Collector: SysSrvPerfAttrDisc
NumEnqueue Y con NA NA NA set by coll graph number of operations

Indicates the number of enqueue operations initiated.

Collector: SysSrvPerfAttrDisc
NumReqPerHour Y con NA undef undef set by coll graph requests per hr

Indicates the number of requests per hour.

Collector: SysSrvPerfAttrDisc
NumRequest Y con NA undef undef set by coll graph number of requests

Indicates the number of requests initiated by the server.

Collector: SysSrvPerfAttrDisc
Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 11 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumTranAbt Y con NA NA NA set by coll graph number of
transactions
Indicates the total number of transactions aborted.

Collector: SysSrvPerfAttrDisc
NumTranBegun Y con NA NA NA set by coll graph number of
transactions
Indicates the total number of transactions begun.

Collector: SysSrvPerfAttrDisc
NumTranCmt Y con NA undef undef set by coll graph number of
transactions
Indicates the total number of transactions committed.

Collector: SysSrvPerfAttrDisc
ServerStatus Y con NA 2–4 4–4 set by coll stoplight none

Indicates whether the server is up or down.

Collector: SysSrvPerfAttrDisc
TotReqCompl Y con NA undef undef set by coll gauge number of requests

Indicates the total number of requests completed by the

server.

Collector: SysSrvPerfAttrDisc
TotWorkloadCompleted Y con NA undef undef set by coll graph number of jobs

Indicates the total workload completed by the server.

Collector: SysSrvPerfAttrDisc

PATROL Parameter Reference Manual 31

PATROL Parameter Reference Manual 32

Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 12 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BEATUX_SETUP Application Class
_monitorRegisterInstance Y coll NA NA NA 30 sec none none

Collects information about the Tuxedo environment

during initial KM discovery cycle.
BEATUX_SYSTEM Application Class
AppQueueDisc Y std NA NA NA 300 sec none none

Discovers Tuxedo application queue information; creates

and updates BEATUX_APPQ instance icons.
ClientAttrDisc Y std NA NA NA 900 sec none none

Discovers run-time attributes of Tuxedo active clients in

an application (T_CLIENT).
GroupAttrDisc Y std NA NA NA 20 min none none

Discovers run-time attributes of Tuxedo server group

(T_GROUP).
groupDisc Y std NA NA NA 10 min none none

Discovers Tuxedo group information based on group

configuration; creates and updates the BEATUX_GROUP
instance icons.
MachineAttrDisc Y std NA NA NA 20 min none none

Discovers run-time attributes of a particular machine

(T_MACHINE).
machineDisc Y std NA NA NA 10 min none none

Discovers a Tuxedo instance’s logical machine

information and system administrative server
information (such as BBL, DBBL, and BRIDGE); also
creates and updates BEATUX_MACHINE and
BEATUX_SERVER instance icons.
Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 13 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MIBDiscovery Y std NA 0–0 0–0 30 min text none
warn alarm
Discovers MIB attributes in TUXEDO system.
MSGAttrDisc Y std NA NA NA 600 sec none none

Discovers run-time attributes of Tuxedo system managed

Unix System message queues (T_MSG).
NumActiveClients Y std NA 0–0 0–0 10 min graph number of clients
warn alarm
Indicates the number of active clients.
NumServers Y std NA 0–0 0–0 600 sec graph number of servers
warn alarm
Indicates the current number of servers.
OthersAttrDisc Y std NA NA NA 600 sec none none

Discovers run-time attributes of the Tuxedo application

queue space (T_APPQSPACE).
QSpaceDisc Y std NA NA NA 360 sec none none

Discovers Tuxedo queue space information; creates and

updates the BEATUX_QSPACE instance icons.
QueueAttrDisc Y std NA NA NA 600 sec none none

Discovers run-time attributes of the Tuxedo system

queue.
queueDiscovery Y std NA NA NA 60 sec none none

Discovers a Tuxedo instance’s queue information and

creates and updates BEATUX_QUEUE instance icons.
PATCOLStatus Y std NA 1–1 1–1 60 sec stoplight none
warn alarm
Indicates whether the PATROL collector is available and
running. If this parameter is in alarm, restart the collector.

PATROL Parameter Reference Manual 33

PATROL Parameter Reference Manual 34

Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 14 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SysSrvCfgAttrDisc Y std NA NA NA 600 sec none none

Discovers configuration attributes of the Tuxedo system

servers, such as BBL, DBBL, and BRIDGE.
SysSrvPerfAttrDisc Y std NA NA NA 600 sec none none

Discovers run-time performance attributes of the Tuxedo

system servers, such as BBL, DBBL, and BRIDGE.
WSHAttrDisc Y std NA NA NA 600 sec none none

Discovers run-time attributes of the Tuxedo Workstation

Handler (T_WSH).
WSHDisc Y std NA NA NA 240 sec none none

Discovers Tuxedo workstation handler information;

creates and updates the BEATUX_WSH instance icons.
WSLAttrDisc Y std NA NA NA 600 sec none none

Discovers run-time attributes of Tuxedo workstation

listener server (T_WSL).
BEATUX_WSH Application Class
NumBlockQ Y con NA NA NA set by coll graph number of
occurrences
Indicates the number of times the workstation handler
was unable to enqueue a message.

Collector: WSHAttrDisc
NumRcvdMessage Y con NA undef undef set by coll graph number of messages

Displays the number of received messages from the

network from workstation clients.

Collector: WSHAttrDisc
Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 15 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumRcvdMessagePerMin Y con NA undef undef set by coll graph messages per minute

Displays the number of received messages from the

network from workstation clients per minute.

Collector: WSHAttrDisc
NumSentMessages Y con NA undef undef set by coll graph number of messages

Indicates the number of messages sent by the network to

the workstation clients.

Collector: WSHAttrDisc
NumSentMsgPerMin Y con NA undef undef set by coll graph messages per minute

Displays the number of sent messages from the network

to workstation clients per minute.

Collector: WSHAttrDisc
TotalActiveTime Y con NA NA NA set by coll gauge sec

Indicates the active time since the workstation handler

started.

Collector: WSHAttrDisc
TotalIdleTime Y con NA NA NA set by coll gauge sec

Indicates the idle time since the workstation handler

started.

Collector: WSHAttrDisc

PATROL Parameter Reference Manual 35

PATROL Parameter Reference Manual 36

Table 3 PATROL for BEA Tuxedo 6.1.01 (Part 16 of 16)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TotalRcvdBytes Y con NA undef undef set by coll graph bytes

Indicates the number of bytes from the network received

by workstation clients.

Collector: WSHAttrDisc
TotalSentBytes Y con NA undef undef set by coll graph KB

Indicates the number of kilobytes sent to the network by

workstation clients.

Collector: WSHAttrDisc
BEATUX_WSL Application Class
MaxActHandler Y con NA undef undef set by coll graph number of handlers

Indicates the maximum number of currently active

handles associated with a workstation listener.

Collector: WSLAttrDisc
NumCurHandler Y con NA undef undef set by coll gauge number of handlers

Indicates the number of currently active handlers for this

workstation listener.

Collector: WSLAttrDisc
PctHandlerUsed Y con NA undef undef set by coll gauge percentage of
workstation handler
Displays the percent of the workstation handler being being used
used.

Collector: WSLAttrDisc
PATROL for BEA WebLogic 2.3.00

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 1 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
BEAWLI_INTEGRATION Application Class
_IntegAttrDisc Y coll undef undef undef 5 min none none

Internal integration server attribute collector.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).
AppEventErrCount Y con 0–10 1–5 6–10 set by coll graph number of errors
alarm warn alarm
The number of encountered event delivery errors of the
application view.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: _IntegAttrDisc
AppSvcAsynErrCount Y con 0–5 0–5 5–5 set by coll graph number of errors
warn OK OK
The error count of application view of the asynchronous
service.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: _IntegAttrDisc

PATROL Parameter Reference Manual 37

PATROL Parameter Reference Manual 38

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 2 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
AppSvcAvgElapsedTime Y con 0–8000 4000–6000 6000–8000 set by coll graph msec
alarm warn alarm
The average elapsed time for all services providedby the
application views.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: _IntegAttrDisc
AppSvcSynErrCount Y con 0–5 0–5 5–5 set by coll graph number of errors
warn OK OK
The error count of application view of the synchronous
service.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: _IntegAttrDisc
IntegDiscovery Y coll undef undef undef 2 min none none

Internal business process object discovery.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (ful).
NumEventRowCount Y con 0–100 0–100 100–100 set by coll graph number of events
OK OK OK
The number of events in the process tracking table.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: _IntegAttrDisc
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 3 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
NumTotalDeadMsg Y con 0–1 0–1 1–1 set by coll graph number of messages
warn OK OK
The total number of undelivered messages for all the
channels of a message broker.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: _IntegAttrDisc
BEAWLi_PROCESS Application Class
ElapsedTime Y con 0–100 0–100 100–100 set by coll graph sec
OK OK OK
The average time spent executing messages to this
operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: _IntegAttrDisc
NumTotalExceededSLA Y con 0–100 0–100 100–100 set by coll graph number of instances
OK OK OK
The total number of instances that exceeded the SLA set
for this process.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: _IntegAttrDisc

PATROL Parameter Reference Manual 39

PATROL Parameter Reference Manual 40

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 4 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
ProcessThroughput Y con 0–100 0–100 100–100 set by coll graph percentage of
OK OK OK process instances
The percentage of the number of “completed“ process
instances divided by the number of all process instances.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: _IntegAttrDisc
BEAWLP_CACHE Application Class
CacheMode Y con 0–1 0–0 1–1 set by coll bool 0 - False,
OK warn OK 1 - True
The enabled mode of this cache.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: PortalDiscovery
BEAWLP_PORTAL Application Class
PortalDiscovery Y coll undef undef undef 15 min text NA

Internal collector for WebLogic portal data.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 5 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
BEAWLS_CLUSTER Application Class
ClusteredServerStatus Y std undef 0–0 1–1 set by coll stoplight none
alarm warn
stoplight icon indicating whether or not the clustered
server is available.

Required Configuration is basic (full).

Collector: AttrDiscovery
BEAWLS_DBURL Application Class
AvgResponseTime N con undef 4000–6000 6000–8000 set by coll graph msec

Average response time, in milliseconds, for all SQL

statements with this database URL that have been
executed.

Required Configuration is inst.

Collector: _SQLRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _SQLRespColl (BEAWLS_SERVER)
HighestInvocationCount N con undef 4000–6000 6000–10000 set by coll graph number of requests

Number of times that the SQL statement most often

requested during the previous polling cycle was invoked.

Required Configuration is inst.

Collector: _SQLRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _SQLRespColl (BEAWLS_SERVER)

PATROL Parameter Reference Manual 41

PATROL Parameter Reference Manual 42

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 6 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
InvocationRate N con undef inactive by 100–100 set by coll graph calls per sec
default
Frequency at which a database URL is called.

Required Configuration is inst.

Collector: _SQLRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _SQLRespColl (BEAWLS_SERVER)
LongestSQLAvgRespTime N con undef 4000–6000 6000–8000 set by coll graph msec

Time (in ms) needed to run the SQL statement with the
slowest average response time.

Required Configuration is inst.

Collector: _SQLRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _SQLRespColl (BEAWLS_SERVER)
LongestSQLTotalRespTime N con undef 8000–10000 10000–16000 set by coll graph msec

Time (in ms) needed to run the SQL statement with the
slowest total response time.

Required Configuration is inst.

Collector: _SQLRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _SQLRespColl (BEAWLS_SERVER)
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 7 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
TotalInvocationCount N con undef 4000–6000 6000–10000 set by coll graph number

Number of invocations of all SQL statements executed

during the most recent polling cycle.

Required Configuration is inst.

Collector: _SQLRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _SQLRespColl (BEAWLS_SERVER)
TotalResponseTime N con undef 8000–10000 10000–160000 set by coll graph msec

Total response time for all SQL statements with the

monitored URL over the most recent polling cycle.

Required Configuration is inst.

Collector: _SQLRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _SQLRespColl (BEAWLS_SERVER)
BEAWLS_EJB_HOME Application Class
ActivationCount Y con undef undef undef set by coll graph number of beans

Number of beans that need to be activated to satisfy a

client request. An EJB is activated if a suitable EJB cannot
be found in the cache. This parameter does not apply to
stateless session EJBs.

Required Configuration is basic (key).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 43

PATROL Parameter Reference Manual 44

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 8 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
AvgResponseTime N con undef 800–900 900–1000 set by coll graph msec

Average response time during previous polling cycle, of

the EJB across all methods.

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)
BeanAccessCount Y con 0–100 0–100 100–100 set by coll graph number of attempts
OK OK OK
The total number of attempts made to get a bean instance
from the free pool.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
BeanDestroyedCount Y con 0–100 0–100 100–100 set by coll graph number of beans
OK OK OK
The total number of times a bean instance from this pool
was destroyed due to a non-application exception being
thrown from it.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 9 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
BeanDestroyedRatio Y con 0–100 0–100 100–100 set by coll graph percentage of
OK OK OK number of requests
The ratio of the number of beans destroyed to the total for a bean
number of requests for a bean.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
BeanMissCount Y con 0–100 0–100 100–100 set by coll graph number of attempts
OK OK OK
The total number of times a failed attempt was made to
get a bean instance from the free pool.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
BeansIdle Y con undef undef undef set by coll graph number of beans

Number of unused beans available for assignment. This

parameter does not apply to stateful session EJBs.

Required Configuration is basic (key).

Collector: AttrDiscovery
BeansInUse Y con undef undef undef set by coll graph number of beans

Number of beans currently being used. This parameter does

not apply to stateful session EJBs.

Required Configuration is basic (key).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 45

PATROL Parameter Reference Manual 46

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 10 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
CacheAccessCount Y con undef undef undef set by coll graph number of accesses

Total number of times the cache has been

accessed,whther or not the target was found. This
parameter does not apply to stateless session EJBs.

Required Configuration is basic (key).

Collector: AttrDiscovery
CachedBeansCurrentCount Y con undef undef undef set by coll graph number of beans

Number of EJB instances maintained in the cache. This

parameter does not apply to stateless session EJBs.

Required Configuration is basic (key).

Collector: AttrDiscovery
CacheHitCount Y con undef undef undef set by coll graph number of hits

Number of times that a target EJB sought in the cache was

actually found. This parameter applies to stateless session and
entity EJBs.

Required Configuration is basic (key).

Collector: AttrDiscovery
CacheMissRatio Y con 0–100 0–100 100–100 set by coll graph percentage of cache
OK OK OK access count
The BeanMissCount divided by the CacheAccessCount.
This parameter applies to stateless session and entity EJBs.

Required Configuration is basic (key).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 11 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
FreePoolMissRatio Y con 0–100 0–100 100–100 set by coll graph percentage of total
OK OK OK number of requests
The ratio of the number of times a request was made to for a bean
get a bean from the pool when no beans were available,
divided by the total number of requests for a bean for a
pool.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
FreePoolTimeout Y con undef undef undef set by coll graph number of beans

Number of beans that timed out waiting for the free pool.
If this number is other than zero, it indicates that
transactions failed due to insufficient beans in the free
pool; you may wish to allocate additional EJBs to the
pool. This parameter does not apply to stateful session beans.

Required Configuration is basic (key).

Collector: AttrDiscovery
FreePoolTimeoutRatio Y con 0–100 0–100 100–100 set by coll graph percentage of total
OK OK OK number of requests
The ratio of the number of requests that have timed out made
waiting for a bean from the pool divided by the total
number of requests made.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 47

PATROL Parameter Reference Manual 48

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 12 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
FreePoolWaiter Y con undef undef undef set by coll graph number of beans

Number of beans waiting for the free pool. If this number

is growing, you may wish to allocate additional EJBs to
the pool (see the online Help). This parameter does not apply
to stateful session EJBs.

Required Configuration is basic (key).

Collector: AttrDiscovery
InvocationCount N con undef 4000–6000 6000–10000 set by coll graph number of calls

Number of times the EJB was invoked during the

previous polling cycle (across all methods).

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)
InvocationRate N con undef undef undef set by coll graph calls per sec

Number of times per millisecond (frequency rate) that the

EJB was invoked during the previous polling cycle
(across all methods).

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 13 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
JMSConnectionAlive Y con undef undef undef set by coll state bool none

Status of JMS connection (up or down).

Required Configuration is basic (key).

Collector: AttrDiscovery
LockEntriesCount Y con undef undef undef set by coll graph number of entries

Number of currently locked entries.

Required Configuration is basic (key).

Collector: AttrDiscovery
LockManagerAccessCount Y con undef undef undef set by coll graph number of accesses

Number of times the lock manager was accessed.

Required Configuration is basic (full).

Collector: AttrDiscovery
LockTimeoutCount Y con undef undef undef set by coll graph number of accesses

Number of times an access to the lock manager timed out.

Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 49

PATROL Parameter Reference Manual 50

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 14 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
LockimeoutRatio Y con 0–100 0–100 100–100 set by coll graph percentage of lock
OK OK OK access count
The LockTimeoutCount divided by the
LockAccessCount.

Required Configuration is basic (key).

Collector: AttrDiscovery
LockWaiterCount Y con undef undef undef set by coll graph number of beans

Number of beans currently waiting for service from the

lock manager.

Required Configuration is basic (full).

Collector: AttrDiscovery
LockimeoutRatio Y con 0–100 0–100 100–100 set by coll graph percentage of lock
OK OK OK access count
The LockWaiterCount divided by the LockAccessCount.

Required Configuration is basic (key).

Collector: AttrDiscovery
LongestEJBAvgRespTime N con undef 800–900 900–1000 set by coll graph msec

Longest average response time of any method executed

for this specific EJB during the previous polling cycle.

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 15 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
LongestEJBTotalRespTime N con undef 1000–2000 2000–3000 set by coll graph msec

Longest total response time of any method, during the

previous polling cycle.

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)
MostInvocationEJB N con undef 4000–6000 6000–10000 set by coll graph number of calls

Highest invocation count for any method executed by the

EJB during the previous polling cycle.

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)
PassivationCount Y con undef undef undef set by coll graph number of beans

Number of beans passivated since last cycle. An EJB is

passivated either because the cache is full or because the
bean was not accessed over a long period of time.

Required Configuration is basic (key).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 51

PATROL Parameter Reference Manual 52

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 16 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
TotalResponseTime N con undef 1000–2000 2000–3000 set by coll graph msec

Cumulative response time of the EJB across all methods

during the previous polling cycle.

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)
TransactionCommitRate Y con undef undef undef set by coll graph number of commits

Rate at which transactions are committed. This is

measured as number of commits per discovery cycle.

Required Configuration is basic (key).

Collector: AttrDiscovery
TransactionRollbackRate Y con undef undef undef set by coll graph number of rollbacks

Number of transaction rollback operations performed by

this EJB per discovery cycle.

Required Configuration is basic (key).

Collector: AttrDiscovery
TransactionTimeoutRate Y con undef undef undef set by coll graph number of timeouts

Number of transactions that failed per discovery cycle

because they could not complete within a satisfactory
time.

Required Configuration is basic (key).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 17 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
BEAWLS_EJB_METHOD Application Class
AvgResponseTime N con undef 800–900 900–1000 set by coll graph msec

Average response time of the method during previous

polling cycle.

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)
InvocationCount N con undef 4000–6000 6000–10000 set by coll graph number of calls

Number of times the method was invoked during the

previous polling cycle.

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)
InvocationRate N con undef undef undef set by coll graph calls per sec

Number of times per millisecond (frequency rate) that the

method was invoked during the previous polling cycle.

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)

PATROL Parameter Reference Manual 53

PATROL Parameter Reference Manual 54

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 18 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
TotalResponseTime N con undef 1000–2000 2000–3000 set by coll graph msec

Cumulative response time of the method during the

previous polling cycle.

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)
BEAWLS_EXEC_QUEUE Application Class
ExecQThroughput Y con undef undef undef set by coll graph number of jobs

Execution queue throughput. This parameter indicates

the rate at which requests are processed by the WebLogic
Server. (Number of requests processed during the
previous polling cycle.)

Required Configuration is basic (key).

Collector: AttrDiscovery
ExecuteQueueLength Y con undef undef undef set by coll graph number of requests

Number of requests waiting in the execution queue.

Required Configuration is basic (key).

Collector: AttrDiscovery
IdleExecThreadCount Y con undef undef undef set by coll graph number of queues

Number of execution queues currently idle.

Required Configuration is basic (key).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 19 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
QueueLengthPercent Y con 0–100 0–100 100–100 set by coll graph percentage of
OK OK OK maximum queue
The percentage of current queue length divided by the length
maximum queue length.

Required Configuration is basic (key).

Collector: AttrDiscovery
BEAWLS_JCA Application Class
ActiveConnectionsCurrentCount Y con undef undef undef set by coll graph number of connects

Number of active Connector connections in the JCA pool.

Required Configuration is basic (key).

Collector: AttrDiscovery
ActiveConnectionsHighCount Y con undef undef undef set by coll graph number of connects

Highest number of active Connector connections in the

JCA pool (highwater mark) since the pool was
established.

Required Configuration is basic (full).

Collector: AttrDiscovery
AverageActiveUsage Y con undef undef undef set by coll graph number of connects

Running average of connections that are active in the

connection pool since it was last shrunk.

Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 55

PATROL Parameter Reference Manual 56

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 20 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
ConnectionIdleProfileCount Y con undef undef undef set by coll graph number of connects

Number of idle leak connection profiles stored for this

JCA pool.

Required Configuration is basic (full).

Collector: AttrDiscovery
ConnectionLeakProfileCount Y con undef undef undef set by coll graph number of connects

Number of leak connection profiles stored for this JCA

pool.

Required Configuration is basic (full).

Collector: AttrDiscovery
CreatedConnectionsTotalCount Y con undef undef undef set by coll graph number of connects

Total number of connections created in this Connector

connection pool since the pool was created.

Required Configuration is basic (full).

Collector: AttrDiscovery
DestroyedConnectionsTotalCount Y con undef undef undef set by coll graph number of connects

Total number of connections destroyed in this Connector

connection pool since the pool was created.

Required Configuration is basic (full).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 21 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
FreeConnectionsCurrentCount Y con undef undef undef set by coll graph number of connects

Total number of currently free connections in the JCA

connector pool.

Required Configuration is basic (key).

Collector: AttrDiscovery
FreeConnectionsHighCount Y con undef undef undef set by coll graph number of connects

Highest number of currently free connections in the JCA

connector pool since the pool was created (high water
mark).

Required Configuration is basic (full).

Collector: AttrDiscovery
IdleConnectionsTotalCount Y con undef undef undef set by coll graph number of connects

Total number of idle connections detected in the lifetime

of this pool.

Required Configuration is basic (full).

Collector: AttrDiscovery
LeakedConnectionsTotalCount Y con undef undef undef set by coll graph number of connects

Total number of leaked connections detected over the

lifetime of this pool.

Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 57

PATROL Parameter Reference Manual 58

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 22 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
MatchedConnectionsTotalCount Y con undef undef undef set by coll graph number of connects

Total number of times since the pool was created that a

request for a connection was satisfied by using an existing
connection from the pool.

Required Configuration is basic (full).

Collector: AttrDiscovery
RecycledTotalCount Y con undef undef undef set by coll graph number of connects

Total number of connections recycled during the

previous polling cycle.

Required Configuration is basic (full).

Collector: AttrDiscovery
RejectedConnectionsTotalCount Y con undef undef undef set by coll graph number of connects

Total number of rejected requests for a connection since

the pool was created.

Required Configuration is basic (full).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 23 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
BEAWLS_JDBC Application Class
ActiveConnections Y con undef undef undef set by coll graph number of connects

Number of active database connections held by a JDBC

pool. If this number is at or close to the maximum
capacity (shown in the InfoBox), consider increasing the
maximum number of connections to decrease the amount
of time that requests will have to wait for a connection.

Required Configuration is basic (key).

Collector: AttrDiscovery
AvailableConnections Y con 0–100 0–100 100–100 set by coll graph number of
OK OK OK connections
The number of available connections in this pool.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
ConnectionDelayTime Y con undef undef undef set by coll graph msec

Average time (in milliseconds) needed to get a connection

from the database connection pool.

Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 59

PATROL Parameter Reference Manual 60

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 24 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
ConnectionLeakProfileCount Y con undef undef undef set by coll graph number of profiles

Number of connection leak profiles. Connection leaks

occur when a pool is closed without an explicit close()
statement and is then scooped up during garbage
collection. Use the Connection Leak Report to view a
stack trace with details.

Required Configuration is basic (full).

Collector: AttrDiscovery
FailuresToReconnectCount Y con undef 1–1000 1000–1000 set by coll graph number of failures

Number of database connections that failed to reconnect

during the most recent collection cycle. Failure to
reconnect may indicate that a database is down, or that
configuration information must be updated.

Required Configuration is basic (key).

Collector: AttrDiscovery
LeakedConnectionsCount Y con undef 1–5 5–100 set by coll graph number of leaks

Number of connections that leaked. See the online Help

for details.

Required Configuration is basic (key).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 25 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
PoolState Y con undef 1–1 1–1 set by coll stoplight none

Status of the connection pool. Available (0) or other (1),

which can include a pool that is unavailable, suspended,
shut down, or is in an unknown state.

Required Configuration is basic (key).

Collector: AttrDiscovery
StatementCacheHitCount Y con undef undef undef set by coll graph number of statements

Number of statements that were found in cache.

Required Configuration is basic (full).

Collector: AttrDiscovery
StatementCacheMissCount Y con undef undef undef set by coll graph number of statements

Number of statements that were sought in the cache, but

not found.

Required Configuration is basic (full).

Collector: AttrDiscovery
StatementProfileCount Y con undef undef undef set by coll graph number of profiles

Number of SQL statements profiled. If SQL statement

profiling is turned on, information such as execution
time, statement text, and performance metrics, will be
retained. SQL profiles can be viewed using the SQL
Roundtrip report command in the JDBC application class.

Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 61

PATROL Parameter Reference Manual 62

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 26 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
UnavailableConnections Y con 0–100 0–100 100–100 set by coll graph number of
OK OK OK connections
The number of unavailable connections in this pool.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
WaitingForConnections Y con undef undef undef set by coll graph number of requests

Number of requests waiting for an available database

connection. Connections may be waiting because all
connections in the pool are in use. See the online Help for
details.

Required Configuration is basic (key).

Collector: AttrDiscovery
BEAWLS_JMS Application Class
HealthStatus Y con 0–3 1–3 3–3 set by coll stoplight 0 - OK,
OK OK Ok 1 - warn,
The health status of the JMS service. 2 - critical,
3 - failed or unkown
This parameter only supports WebLogic Server version
7.0 and higher.
Required Configuration is basic (key).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 27 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
JMSConnectionsCurrentCount Y con 0–100 0–100 100–100 set by coll graph number of
OK OK Ok connections
The current number of connections to this WebLogic
Server.

Required Configuration is basic (key).

Collector: AttrDiscovery
JMSServersCurrentCount Y con 0–100 0–100 100–100 set by coll graph number of JMS
OK OK Ok servers
The number of JMS servers that are curently deployed on
this WebLogic Server instance.

Required Configuration is basic (key).

Collector: AttrDiscovery
BEAWLS_JMS_DESTINATION Application Class
BytesCurrentCount Y con 0–100 0–100 100–100 set by coll graph number of bytes
OK OK OK
The number of bytes currently stored in the destination.
This does not include pending bytes.

Required Configuration is basic (full).

Collector: AttrDiscovery
BytesPendingCount Y con 0–100 0–100 100–100 set by coll graph number of bytes
OK OK OK
The number of pending bytes (bytes for pending
messages) stored in the destination.

Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 63

PATROL Parameter Reference Manual 64

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 28 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
BytesReceivedCount Y con 0–100 0–100 100–100 set by coll graph number of bytes
OK OK OK
The number of bytes received in this destination since the
last reset.

Required Configuration is basic (full).

Collector: AttrDiscovery
BytesThresholdTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The amount of time in the threshold condition since the
last reset.

Required Configuration is basic (full).

Collector: AttrDiscovery
ConsumersCurrentCount Y con 0–100 0–100 100–100 set by coll graph number of consumers
OK OK OK
The number of consumers currently accessing this
destination.

Required Configuration is basic (full).

Collector: AttrDiscovery
MessagesCurrentCount Y con 0–100 0–100 100–100 set by coll graph number of messages
OK OK OK
The current number of messages in the destination. This
does not include pending messages.

Required Configuration is basic (full).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 29 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
MessagesPendingCount Y con 0–100 0–100 100–100 set by coll graph number of messages
OK OK OK
The number of pending messages in the destination.

Required Configuration is basic (full).

Collector: AttrDiscovery
MessagesReceivedCount Y con 0–100 0–100 100–100 set by coll graph number of messages
OK OK OK
The number of messages received in this destination since
the last reset.

Required Configuration is basic (full).

Collector: AttrDiscovery
MessagesThresholdTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The amount of time in the threshold condition since the
last reset.

Required Configuration is basic (full).

Collector: AttrDiscovery
BEAWLS_JMSSERVER Application Class
BytesCurrentCount Y con undef undef undef set by coll graph number of bytes

Current number of bytes stored on this JMS server. This

does not include pending bytes.

Required Configuration is basic (key).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 65

PATROL Parameter Reference Manual 66

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 30 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
BytesHighCount Y con undef undef undef set by coll graph number of bytes

Peak number of bytes stored on this JMS server.

Required Configuration is basic (full).

Collector: AttrDiscovery
BytesPendingCount Y con undef undef undef set by coll graph number of bytes

Current number of bytes pending (unacknowledged or

uncommitted) that are stored on the server.

Required Configuration is basic (key).

Collector: AttrDiscovery
BytesReceivedCount Y con undef undef undef set by coll graph number of bytes

Number of bytes received by this JMS server since the last

reset.

Required Configuration is basic (full).

Collector: AttrDiscovery
BytesThresholdTime Y con undef undef undef set by coll graph msec

Bytes threshold time.

Required Configuration is basic (full).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 31 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
DestinationsCurrentCount Y con undef undef undef set by coll graph number of
destination
Current number of destinations for this JMS server.

Required Configuration is basic (full).

Collector: AttrDiscovery
DestinationsHighCount Y con undef undef undef set by coll graph number of
destination
Peak number of destinations for this JMS server.

Required Configuration is basic (full).

Collector: AttrDiscovery
DestinationsTotalCount Y con undef undef undef set by coll graph number of
destination
Total number of destinations for this JMS server since the
last reset.

Required Configuration is basic (full).

Collector: AttrDiscovery
HealthStatus Y con undef 1–1 2–3 set by coll stoplight 0 - OK,
1 - warn,
Health status (general condition) of the JMS server. 2 - critical,
3 - failed or unknown
This parameter only supports WebLogic Server version
7.0 and higher.
Required Configuration is basic (key).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 67

PATROL Parameter Reference Manual 68

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 32 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
Note about statuses:

WARN may indicate:

■ msg count has been above threshold for 1 hour
■ msg count has been above threshold for 90% of its total running time,
■ byte count has been above threshold for 1 hour
■ byte count has been above threshold for 90% of its total running time
CRITICAL may indicate:
■ all JMS threads have been blocked for 10 minutes
■ I/O(store operation) exception in last 10 minutes
FAILED indicates that the server status is unknown
OK indicates that there are no WARN, CRITICAL, or FAILED conditions
MessagesCurrentCount Y con undef undef undef set by coll graph number of messages

Current number of messages stored on this JMS server.

This does not include pending messages.

Required Configuration is basic (key).

Collector: AttrDiscovery
MessagesHighCount Y con undef undef undef set by coll graph number of messages

Highest number of messages stored on this JMS server.

This does not include pending messages.

Required Configuration is basic (full).

Collector: AttrDiscovery
MessagesPendingCount Y con undef undef undef set by coll graph number of messages

Number of messages currently pending

(unacknowledged or uncommitted) on this JMS server.

Required Configuration is basic (key).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 33 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
MessagesReceivedCount Y con undef undef undef set by coll graph number of messages

Number of messages received by this JMS server since the

last reset.

Required Configuration is basic (full).

Collector: AttrDiscovery
MessagesThresholdTime Y con undef undef undef set by coll graph msec

Message threshold time.

Required Configuration is basic (full).

Collector: AttrDiscovery
SessionPoolsCurrentCount Y con undef undef undef set by coll graph number of pools

Current number of session pools running on this JMS

server.

Required Configuration is basic (full).

Collector: AttrDiscovery
SessionPoolsHighCount Y con undef undef undef set by coll graph number of pools

Peak number of session pools running on this JMS server.

Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 69

PATROL Parameter Reference Manual 70

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 34 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
SessionPoolsTotalCount Y con undef undef undef set by coll graph number of pools

Total number of session pools on this JMS server.

Required Configuration is basic (full).

Collector: AttrDiscovery
BEAWLS_JVMPROFILER Application Class
AvgGCTime N con undef undef undef set by coll graph sec

Average time spent on garbage collection during the

previous polling cycle.

Required Configuration is prof.

Collector: _JVMProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _JVMProfColl (BEAWLS_SERVER)
CPUUsage N con undef undef undef set by coll graph sec

Total amount of CPU time used by the Java Virtual

Machine.

Required Configuration is prof.

Collector: _JVMProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _JVMProfColl (BEAWLS_SERVER)
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 35 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
GCCount N con undef undef undef set by coll graph number of times

Number of times that garbage collection was performed

duirng the previous polling cycle.

Required Configuration is prof.

Collector: _JVMProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _JVMProfColl (BEAWLS_SERVER)
GCTime N con undef undef undef set by coll graph sec

Amount of CPU usage spent on garbage collection during

the previous polling cycle.

Required Configuration is prof.

Collector: _JVMProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _JVMProfColl (BEAWLS_SERVER)
MemoryUsage N con undef undef undef set by coll graph MB

Total amount of real memory allocated by the Java

Virtual Machine.

Required Configuration is prof.

Collector: _JVMProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _JVMProfColl (BEAWLS_SERVER)

PATROL Parameter Reference Manual 71

PATROL Parameter Reference Manual 72

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 36 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
ThreadHighestCPUTime N con undef undef undef set by coll graph sec

Highest CPU time used by one JVM thread in seconds

(this parameter can be used as an indicator to look for
stuck threads).

Required Configuration is prof.

Collector: _JVMProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _JVMProfColl (BEAWLS_SERVER)
TotalHeapSize N con undef undef undef set by coll graph MB

Total amount of memory allocated to heap.

Required Configuration is prof.

Collector: _JVMProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _JVMProfColl (BEAWLS_SERVER)
TotalThreadCPU N con undef undef undef set by coll graph sec

Total CPU time used by all JVM threads.

Required Configuration is prof.

Collector: _JVMProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _JVMProfColl (BEAWLS_SERVER)
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 37 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
UsedHeapByAllThreads N con undef undef undef set by coll graph MB

Total amount of memory used by all thread objects

during the previous collection cycle.

Required Configuration is prof.

Collector: _JVMProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _JVMProfColl (BEAWLS_SERVER)
VMemoryUsage N con undef undef undef set by coll graph MB

Total virtual memory used by the Java Virtual Machine.

Required Configuration is prof.

Collector: _JVMProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _JVMProfColl (BEAWLS_SERVER)
BEAWLS_J2EE_APPS Application Class
LongestEJBAvgRespTime N con 0–8000 4000–6000 6000–8000 set by coll graph msec
alarm warn alarm
The longest EJB average response time of this application;
advanced monitoring setting and byte-code
instrumentation is required.

Required Configuration is inst.

Collector: _EJBRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _EJBRespColl (BEAWLS_SERVER)

PATROL Parameter Reference Manual 73

PATROL Parameter Reference Manual 74

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 38 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
LongestWebAppAvgRespTime N con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The longest web application average response time of this
application; advanced monitoring setting and byte-code
instrumentation is required.

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SERVER)
BEAWLS_LOCAL_MANAGED Application Class
_EJBRespColl N coll undef none none 120 sec text none

Collector parameter for EJB instrumentation and

reporting.

Required Configuration is inst.

_JVMProfColl N coll undef none none 180 sec text none

Collector parameter for JVM profiling and reporting.

Required Configuration is prof.

_MethodProfColl N coll undef none none 180 sec text none

Collector parameter for method level profiling and

reporting.

Required Configuration is meth.

_SQLRespColl N coll undef none none 120 sec text none

Collector parameter for SQL instrumentation and

reporting.

Required Configuration is inst.

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 39 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
_WebAppRespColl N coll undef none none 120 sec text none

Collector parameter to get servlet response data.

Required Configuration is inst.

ConnectionStatus Y con undef 2–3 3–4 set by coll stoplight none

WebLogic server client connection status, based on ping

and connect commands. An alarm condition means that
the Patrol collector cannot connect to the server, usually
because WebLogic is not running. Restarting WebLogic
will usually clear an alarm within two minutes.

Required Configuration is basic (key).

Collector: AttrDiscovery
ForeignFragmentsDropped Y con undef undef undef set by coll graph number of fragments

Number of foreign fragments dropped. A foreign

fragment is one that originates in a domain or cluster
using a different multicast address.

Required Configuration is basic (full).

Collector: AttrDiscovery
FragmentsReceived Y con undef undef undef set by coll graph number of fragments

Number of multicast messages received on this server

from within the cluster.

Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 75

PATROL Parameter Reference Manual 76

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 40 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
FragmentsSent Y con undef undef undef set by coll graph number of fragments

Number of multicast messages sent from this server onto

the cluster.

Required Configuration is basic (full).

Collector: AttrDiscovery
FreeHeap Y con undef 5–10 0–5 set by coll graph percentage of JVM
heap space
Percentage of allocated JVM heap space currently
available for use.

Required Configuration is basic (full).

Collector: AttrDiscovery
HealthStatus Y con undef 1–1 2–3 set by coll stoplight none

Health status (general condition) of the managed server.

This parameter only supports WebLogic Server version

7.0 and higher.
Required Configuration is basic (key).

Collector: AttrDiscovery
HeapUsed Y con undef 90–95 95–100 set by coll graph percentage of Java
heap space
Percent of Java heap space in use.

Required Configuration is basic (key).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 41 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
MulticastMsgLost Y con undef 5–100 100–100 set by coll graph number of messages

Total number of incoming multicast messages onto the

cluster that were lost according to the server.

Required Configuration is basic (key).

Collector: AttrDiscovery
NumOpenConnections Y con undef undef undef set by coll graph number of connects

Number of connections to this server.

Required Configuration is basic (key).

Collector: AttrDiscovery
NumOpenSockets Y con undef undef undef set by coll graph number of sockets

Number of open sockets on the managed server.

Required Configuration is basic (key).

Collector: AttrDiscovery
ResentRequests Y con undef undef undef set by coll graph number of messages

Number of state-change (delta) messages that were resent

becaue a receiving server in the cluster missed a message.

Required Configuration is basic (key).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 77

PATROL Parameter Reference Manual 78

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 42 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
BEAWLS_LOG Application Class
LogDiskFreeSpace Y std undef undef undef 600 sec gauge percentage of space
on disk
Percentage of free space on the disk where the log file is
located.

Required Configuration is basic (full).

LogEvent Y std undef undef undef 600 sec graph number of events

Number of events matching sniff pattern since the sniff

pattern was registered for the log file. Only the first
occurrence of a sniff pattern in a line is counted.
Parameter annotation reflects the text that matched the
registered pattern.

Required Configuration is basic (full).

LogIncreaseRate Y std undef undef undef 600 sec graph percentage of log file
size
Rate of increase in the log file size since the last collection
cycle. Set the alarm range to flag abnormally fast
increases in log file size.

Required Configuration is basic (full).

BEAWLS_MANAGED Application Class
ConnectionStatus Y con undef 2–3 3–4 set by coll stoplight none

WebLogic server client connection status, based on ping

and connect commands. An alarm condition means that
the Patrol collector cannot connect to the server, usually
because WebLogic is not running. Restarting WebLogic
will usually clear an alarm within two minutes.

Required Configuration is basic (full).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 43 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
ForeignFragmentsDropped Y con undef undef undef set by coll graph number of fragments

Number of foreign fragments dropped. A foreign

fragment is one that originates in a domain or cluster
using a different multicast address.

Required Configuration is basic (full).

Collector: AttrDiscovery
FragmentsReceived Y con undef undef undef set by coll graph number of fragments

Number of multicast messages received on this server

from within the cluster.

Required Configuration is basic (full).

Collector: AttrDiscovery
FragmentsSent Y con undef undef undef set by coll graph number of fragments

Number of multicast messages sent from this server onto

the cluster.

Required Configuration is basic (full).

Collector: AttrDiscovery
FreeHeap Y con undef 5–10 0–5 set by coll graph percentage of JVM
heap space
Percentage of allocated JVM heap space currently
available for use.

Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 79

PATROL Parameter Reference Manual 80

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 44 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
HealthStatus Y con undef 1–1 2–3 set by coll stoplight none

Health status (general condition) of the managed server.

This parameter only supports WebLogic Server version

7.0 or higher.
Required Configuration is basic (full).

Collector: AttrDiscovery
HeapUsed Y con undef 90–95 95–100 set by coll graph percentage of Java
heap space
Percent of Java heap space in use.

Required Configuration is basic (full).

Collector: AttrDiscovery
MulticastMsgLost Y con undef undef undef set by coll graph number of messages

Total number of incoming multicast messages that were

lost according to the server.

Required Configuration is basic (full).

Collector: AttrDiscovery
NumOpenConnections Y con undef undef undef set by coll graph number of connects

Number of connections to this server.

Required Configuration is basic (full).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 45 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
NumOpenSockets Y con undef undef undef set by coll graph number of sockets

Number of open sockets on the managed server.

Required Configuration is basic (full).

Collector: AttrDiscovery
ResentRequests Y con undef undef undef set by coll graph number of messages

Number of state-change (delta) messages that were resent

becaue a receiving server in the cluster missed a message.

Required Configuration is basic (full).

Collector: AttrDiscovery
BEAWLS_OS Application Class
_ProcColl Y coll undef none none 300 sec text none

Collector parameter to discover performance information

at the local operating system level and to populate
parameter data in the OS application class.

Required Configuration is basic (full).

ActiveProcesses Y con undef undef undef set by coll text none

List of currently active JVM processes running on a

monitored server.

Required Configuration is basic (full).

Collector: _ProcColl

PATROL Parameter Reference Manual 81

PATROL Parameter Reference Manual 82

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 46 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
NumActiveJVMProcesses Y con undef undef undef set by coll graph number of processes

Number of currently active JVM processes running on a

monitored server.

Required Configuration is basic (full).

Collector: _ProcColl
NumHighCpuJVMProcesses Y con undef undef 1–1 set by coll graph number of processes

Number of processes on the monitored server that exceed

the threshold established by the system administrator to
define a “high CPU” process.

Required Configuration is basic (full).

Collector: _ProcColl
ServerJVMsCpuUtil Y con undef undef undef set by coll graph percentage of CPU
utilization
Percentage of a machine’s CPU utilization attributed to a
WebLogic server JVM.

Required Configuration is basic (full).

Collector: _ProcColl
ServerJVMsMemUsage Y con undef undef undef set by coll graph MB

Total memory being used by a monitored WebLogic

server’s JVM processes.

Required Configuration is basic (full).

Collector: _ProcColl
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 47 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
BEAWLS_PROBE Application Class
AvgConnTime Y std undef 9500–9999 9999–10000 180 sec graph msec

Average connection time for a client to connect through

the WebLogic Server to the applications. See the Help for
recommended alarm ranges.

Required Configuration is basic (full).

AvgPingTime Y std undef 60–90 90–1000 120 sec graph msec

Average ping time. This indicates the average time

needed to query the status of a server.

Required Configuration is basic (full).

BEAWLS_PROF_METHOD Application Class
AvgCPUTime N con undef undef undef set by coll graph sec

Average CPU time used by methods during the previous

polling cycle.

Required Configuration is meth.

Collector: _MethodProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _MethodProfColl (BEAWLS_SERVER)

PATROL Parameter Reference Manual 83

PATROL Parameter Reference Manual 84

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 48 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
CPUTime N con undef undef undef set by coll graph sec

Total CPU time used by methods during the previous

polling cycle.

Required Configuration is meth.

Collector: _MethodProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _MethodProfColl (BEAWLS_SERVER)
ExecutionTime N con undef undef undef set by coll graph sec

Total method execution time during the previous polling

cycle.

Required Configuration is meth.

Collector: _MethodProfColl
(BEAWLS_LOCAL_MANAGED)
Collector: _MethodProfColl (BEAWLS_SERVER)
BEAWLS_SERVER Application Class
_EJBRespColl N coll undef none none 120 sec text none

Collector parameter for EJB instrumentation and

reporting.

Required Configuration is inst.

_JVMProfColl N coll undef none none 600 sec text none

Collector parameter for JVM profiling and reporting.

Required Configuration is prof.

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 49 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
_MethodProfColl N coll undef none none 600 sec text none

Collector parameter for method level profiling and

reporting.

Required Configuration is meth.

_SQLRespColl N coll undef none none 120 sec text none

Collector parameter for SQL instrumentation and

reporting.

Required Configuration is inst.

_WebAppRespColl N coll undef none none 120 sec text none

Collector parameter to get servlet response data.

Required Configuration is inst.

AttrDiscovery Y coll undef none none 180 sec text none

Collector parameter to discover server configuration

attributes.

Required Configuration is basic (full).

CheckNotification Y coll undef none none 10 sec text none

Collector parameter that checks JMX notification log and

creates notification messages and events for PATROL
Event Manager.

Required Configuration is basic (full).

PATROL Parameter Reference Manual 85

PATROL Parameter Reference Manual 86

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 50 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
ConnectionStatus Y con undef 2–3 3–4 set by coll stoplight none

WebLogic server connection status. An alarm condition

means that the Patrol collector cannot connect to the
server, usually because WebLogic is not running.
Restarting WebLogic will usually clear an alarm within
two minutes.

Required Configuration is basic (key).

Collector: AttrDiscovery
FreeHeap Y con undef 5—10 0—5 set by coll graph percentage of
memory in the JVM
Amount of available memory in the JVM heap. See the heap
Help for more information.

Required Configuration is basic (full).

Collector: AttrDiscovery
HealthStatus Y con undef 1–1 2–3 set by coll stoplight 0 - OK,
1 - warn,
Health status (general condition) of the server. 2- critical,
3 - failed
This parameter only supports WebLogic Server version
7.0 and higher.

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 51 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
Note about statuses:

WARN may indicate:

■ msg count has been above threshold for 1 hour
■ msg count has been above threshold for 90% of its total running time,
■ byte count has been above threshold for 1 hour
■ byte count has been above threshold for 90% of its total running time
CRITICAL may indicate:
■ all JMS threads have been blocked for 10 minutes
■ I/O(store operation) exception in last 10 minutes
FAILED indicates that the server status is unknown
OK indicates that there are no WARN, CRITICAL, or FAILED conditions
HeapUsed Y con undef 90–95 95–100 set by coll graph percentage of Java
heap space
Percentage of Java heap space in use. This reflects
memory used by both applications and the WebLogic
Server. See the online Help for details.

Required Configuration is basic (key).

Collector: AttrDiscovery
LogDiscovery Y coll undef none none 600 sec text none

Collector parameter that determines the availability of

log files.

Required Configuration is basic (full).

MainDiscovery Y std undef undef undef 60 sec text none

Discovers configuration information for a registered

server and creates instances of application classes.

Required Configuration is basic (full).

PATROL Parameter Reference Manual 87

PATROL Parameter Reference Manual 88

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 52 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
NumOpenConnections Y con undef undef undef set by coll graph number of
connections
Number of connections to this server.

Collector: AttrDiscovery
NumOpenSockets Y con undef undef undef set by coll graph number of sockets

Number of open sockets on the server.

Required Configuration is basic (key).

Collector: AttrDiscovery
PatrolCollectorStatus Y std undef 3–4 4–4 15 sec stoplight none

Logon status of the Java collector for WebLogic Server.

If PatrolCollectorStatus is in alarm, check the

ConnectionStatus parameter; if it is also in alarm, restart
WebLogic Server, otherwise, use the Update Registered
Server command to verify server attributes. See the online
Help.

Required Configuration is basic (key).

ServletDiscovery Y coll undef none none 600 sec text none

Collector for servlet information.

Required Configuration is basic (full).

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 53 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
BEAWLS_SERVLET Application Class
ExecutionTimeAverage Y con undef 800–900 900–1000 set by coll graph msec

Average execution time for this servlet. This is calculated

as ExecutionTimeTotal divided by InvocationCount.

Required Configuration is basic (key).

Collector: ServletDiscovery
ExecutionTimeHigh Y con undef undef undef set by coll graph msec

Longest execution time for this servlet. This is the slowest

run time since the servlet was created.

Required Configuration is basic (full).

Collector: ServletDiscovery
ExecutionTimeLow Y con undef undef undef set by coll graph msec

Shortest execution time for this servlet.

Required Configuration is basic (full).

Collector: ServletDiscovery
ExecutionTimeTotal Y con undef undef undef set by coll graph msec

Total execution time for this servlet.

Required Configuration is basic (full).

Collector: ServletDiscovery

PATROL Parameter Reference Manual 89

PATROL Parameter Reference Manual 90

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 54 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
InvocationCount Y con undef 4000–6000 6000–10000 set by coll graph number of calls

Number of times a servlet has been invoked.

Required Configuration is basic (key).

Collector: ServletDiscovery
BEAWLS_SERVLET_METHOD Application Class
AvgResponseTime N con undef 800–900 900–1000 set by coll graph msec

Average response time for this servlet to execute.

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SERVER)
InvocationCount N con undef 4000–6000 6000–10000 set by coll graph number of calls

Number of times this servlet was invoked during the

previous collection cycle.

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SERVER)
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 55 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
InvocationRate N con undef undef undef set by coll graph calls per msec

Frequency at which the servlet method was invoked

during the previous collection cycle (number of calls per
millisecond).

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SERVER)
TotalResponseTime N con undef 1000–2000 2000–3000 set by coll graph msec

Total response time for this servlet method during the

previous collection cycle.

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SREVER)
BEAWLS_SETUP Application Class
_monitorRegisterServer Y coll undef none none 1200 sec text none

Collector that discovers WebLogic instances. This runs

only five times after initialization.

Required Configuration is basic (full).

About Y std 0–100 0–100 100–100 600 sec text none
OK OK OK
The information about the product.

Required Configuration is basic (full).

PATROL Parameter Reference Manual 91

PATROL Parameter Reference Manual 92

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 56 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
BEAWLS_SQL Application Class
_SQLResponseColl N coll undef none none 60 sec text none

Collector that discovers SQL response rate data and

populates all consumer parameters for the SQL
application class.

Required Configuration is inst.

AvgResponseTime N con undef 800–900 900–1000 set by coll graph msec

Average response time for this SQL statement to execute.

Required Configuration is inst.

Collector: _SQLResponseColl
InvocationCount N con undef 4000–6000 6000–10000 set by coll graph number of calls

Number of times this SQL was invoked during the

previous collection cycle.

Required Configuration is inst.

Collector: _SQLResponseColl
InvocationRate N con undef undef undef set by coll graph calls per msec

Frequency at which the SQL was invoked during the

previous collection cycle (number of calls per
millisecond).

Required Configuration is inst.

Collector: _SQLResponseColl
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 57 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
TotalResponseTime N con undef 1000–2000 2000–3000 set by coll graph msec

Total response time for this SQL during the previous

collection cycle.

Required Configuration is inst.

Collector: _SQLResponseColl
BEAWLS_WEBAPP Application Class
AvgResponseTime N con undef 800–900 900–1000 set by coll graph msec

Average response time for this web application to

execute.

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SERVER)
InvocationCount N con undef 4000–6000 6000–10000 set by coll graph number of calls

Number of times this web application was invoked

during the previous collection cycle.

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SERVER)

PATROL Parameter Reference Manual 93

PATROL Parameter Reference Manual 94

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 58 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
InvocationRate N con undef undef undef set by coll graph calls per msec

Frequency at which the web application was invoked

during the previous collection cycle (number of calls per
millisecond).

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SERVER)
LongestServletAvgRespTime N con undef 800–900 900–1000 set by coll graph msec

Average response time of the slowest servlet in this web

application.

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SERVER)
LongestServletTotalRespTime N con undef 1000–2000 2000–3000 set by coll graph msec

Longest total response time for any given servlet in a web

application.

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SERVER)
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 59 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
MostInvocationServlet N con undef 4000–6000 6000–10000 set by coll graph number of calls

Highest number of servlet invocations over a user-

selected time range.

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SERVER)
OpenSessionsCount Y con undef undef undef set by coll graph number of sessions

Number of sessions currently open for this application or

component.

Required Configuration is basic (key).

Collector: AttrDiscovery
OpenSessionHighCount Y con undef undef undef set by coll graph number of sessions

High water mark of concurrently open sessions.

Required Configuration is basic (full).

Collector: AttrDiscovery
TotalOpenSessions Y con undef undef undef set by coll graph number of sessions

Total number of open sessions.

Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 95

PATROL Parameter Reference Manual 96

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 60 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
TotalResponseTime N con undef 1000–2000 2000–3000 set by coll graph msec

Total response time for this web application to execute.

Required Configuration is inst.

Collector: _WebAppRespColl
(BEAWLS_LOCAL_MANAGED)
Collector: _WebAppRespColl (BEAWLS_SERVER)
BEAWLS_WS Application Class
HighestHdlTotReqFail Y con 0–100 0–100 100–100 set by coll graph number of requests
OK OK OK
The highest number of total failed request including
SOAP faults, errors, and terminations.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
HighestHdlTotRespFail Y con 0–100 0–100 100–100 set by coll graph number of requests
OK OK OK
The highest number of total failed responses including
SOAP faults, errors, and terminations.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 61 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
NumHighestInvocation Y con 0–100 0–100 100–100 set by coll graph number of calls
OK OK OK
The highest number of invocations for any service
operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
NumHomePageHit Y con 0–100 0–100 100–100 set by coll graph number of hits
OK OK OK
The number of times that the home page of this service
has been visited.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
NumMalformedRequest Y con 0–100 0–100 100–100 set by coll graph number of requests
OK OK OK
The number of times that this service has received a
malformed or otherwise invalid request.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 97

PATROL Parameter Reference Manual 98

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 62 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
NumWSDLHit Y con 0–100 0–100 100–100 set by coll graph number of hits
OK OK OK
The number of times the WSDL of this service has been
retrieved since this webservice was deployed.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
SlowestOpAvgDisp Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The slowest average dispatch time of the service
operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
SlowestOpAvgExec Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The slowest average execution time of the service
operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 63 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
SlowestOpAvgResp Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The slowest average response time of the service
operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
BEAWLS_WS_HDL Application Class
NumReqError Y con 0–100 0–100 100–100 set by coll graph number of times
OK OK OK
The number of times that the handler’s “handlerRequest“
method has thrown a runtime exception.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
NumReqSOAPFault Y con 0–100 0–100 100–100 set by coll graph number of times
OK OK OK
The number of times that the handler’s “handlerRequest“
method has thrown a SOAPFaultException.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 99

PATROL Parameter Reference Manual 100

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 64 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
NumReqTermination Y con 0–100 0–100 100–100 set by coll graph number of times
OK OK OK
The number of times that the handler’s “handlerRequest“
method has returned a “false”.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
NumRespError Y con 0–100 0–100 100–100 set by coll graph number of times
OK OK OK
The number of times that the handler’s
“handlerResponse“ method has thrown a runtime
exception.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
NumRespSOAPFault Y con 0–100 0–100 100–100 set by coll graph number of times
OK OK OK
The number of times that the handler’s
“handlerResponse“ method has thrown a
SOAPFaultException.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 65 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
NumRespTermination Y con 0–100 0–100 100–100 set by coll graph number of times
OK OK OK
The number of times that the handler’s
“handlerResponse“ method has returned a “false”.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
BEAWLS_WS_OPER Application Class
AvgDispTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The average amount of time spent dispatching a single
message to this operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
AvgExecTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The average amount of time spent on a single execution
of this operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 101

PATROL Parameter Reference Manual 102

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 66 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
AvgRespTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The average amount of time spent sending a single
response from this operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
HandlerReqErrorCount Y con 0–100 0–100 100–100 set by coll graph number of errors
OK OK OK
The error count of the handler’s request method.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
HandlerRespErrorCount Y con 0–100 0–100 100–100 set by coll graph number of errors
OK OK OK
The error count of the handler’s response method.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 67 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
HighestDispTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The largest amount of time spent on a single execution of
this operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
HighestExecTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The largest amount of time spent on a single execution of
this operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
HighestRespTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The largest amount of time spent sending a single
response from this operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 103

PATROL Parameter Reference Manual 104

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 68 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
LowestDispTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The smallest amount of time spent dispatching a single
message to this operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
LowesttExecTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The smallest amount of time spent on a single execution
of this operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
LowestRespTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The lowest amount of time spent sending a single
response from this operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 69 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
NumInvocation Y con 0–100 0–100 100–100 set by coll graph number of calls
OK OK OK
The number of times that this operation has been invoked
since the webservice was deployed.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
NumRespError Y con 0–100 0–100 100–100 set by coll graph number of errors
OK OK OK
The number of errors that were encountered sending
responses from this operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (key).

Collector: AttrDiscovery
TotalDispTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The total time spent dispatching messages to this
operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery

PATROL Parameter Reference Manual 105

PATROL Parameter Reference Manual 106

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 70 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
TotalExecTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The total time spent executing this operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
TotalRespTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK OK
The total time spent sending responses from this
operation.

This parameter only supports WebLogic Server version

8.1.
Required Configuration is basic (full).

Collector: AttrDiscovery
JMX_DOMAIN Application Class
MBeanCount Y con undef undef undef set by coll graph number of MBeans

Tracks the number of MBeans registered in an MBean

domain. JMX Discovery runs a thread that updates
parameter values on a flexible schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 71 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
JMX_MAIN Application Class
SetupRequired Y con undef undef undef set by coll text none

Indicates that setup is required for the KM. JMX

Discovery runs a thread that updates parameter values
on a flexible schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

JMX_SERVER Application Class
Availability Y con undef 0–0 undef set by coll bool none

Displays the availability of the registered server (up or

down). This parameter triggers an alarm if the server is
down or if the JMX client is unable to connect to the
server. A value of 0 indicates a server is unavailable, a
value of 1 indicates available. JMX Discovery runs a
thread that updates parameter values on a flexible
schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

MBeanCount Y con undef undef undef set by coll graph number of MBeans

Displays the number of MBeans registered in the MBean

server. JMX Discovery runs a thread that updates
parameter values on a flexible schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

PATROL Parameter Reference Manual 107

PATROL Parameter Reference Manual 108

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 72 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
JMX_CONDITION Application Class
AnnotatedStatus Y con undef 3–5 1–3 set by coll stoplight flag value:
0 - OK,
Tracks the status of a condition. The numeric value 2 - warn,
indicates the status of the condition. When the status 4 - alarm
changes or actions are taken, the graph is annotated. JMX
Discovery runs a thread that updates parameter values
on a flexible schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

BooleanFalseCount Y con undef undef undef set by coll graph number of MBeans

Displays the number of monitored MBeans for which the

current value of the attribute is “false”. JMX Discovery
runs a thread that updates parameter values on a flexible
schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

BooleanTrueCount Y con undef undef undef set by coll graph number of MBeans

Displays the number of monitored MBeans for which the

current value of the attribute is “true”. JMX Discovery
runs a thread that updates parameter values on a flexible
schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 73 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
MBeanCount Y con undef undef undef set by coll graph number of MBeans

Displays the number of MBeans being monitored by this

condition. JMX Discovery runs a thread that updates
parameter values on a flexible schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

StatusCriticalCount Y con undef 1–10000 10000–10000 set by coll graph number of MBeans

Displays the number of monitored MBeans for which the

current status is “alarm”, as defined by notifications or
attribute values. JMX Discovery runs a thread that
updates parameter values on a flexible schedule, as
needed.

Required Configuration is basic.

Collector: JMX Discovery

StatusOKCount Y con undef undef undef set by coll graph number of MBeans

Displays the number of monitored MBeans for which the

current status is “OK”, as defined by notifications or
attribute values. JMX Discovery runs a thread that
updates parameter values on a flexible schedule, as
needed.

Required Configuration is basic.

Collector: JMX Discovery

PATROL Parameter Reference Manual 109

PATROL Parameter Reference Manual 110

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 74 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
StatusWarningCount Y con undef 1–10000 10000–10000 set by coll graph number of MBeans

Displays the number of monitored MBeans for which the

current status is “warning”, as defined by notifications or
attribute values. JMX Discovery runs a thread that
updates parameter values on a flexible schedule, as
needed.

Required Configuration is basic.

Collector: JMX Discovery

StringMatchCount Y con undef undef undef set by coll graph number of MBeans

Displays the number of monitored MBeans for which the

current value of the string matches the specified value.
JMX Discovery runs a thread that updates parameter
values on a flexible schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

StringNoMatchCount Y con undef undef undef set by coll graph number of MBeans

Displays the number of monitored MBeans for which the

current value of the string does not match the specified
value. JMX Discovery runs a thread that updates
parameter values on a flexible schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 75 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
ValueAverage Y con undef undef undef set by coll graph number

Displays the average attribute value across all MBeans

being monitored by this condition. JMX Discovery runs a
thread that updates parameter values on a flexible
schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

ValueMaximum Y con undef undef undef set by coll graph number

Displays the highest value in any MBean being

monitored by this condition. JMX Discovery runs a
thread that updates parameter values on a flexible
schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

PATROL Parameter Reference Manual 111

PATROL Parameter Reference Manual 112

Table 4 PATROL for BEA WebLogic 2.3.00 when used in a WebLogic 6.1, 7.0, or 8.1 environment (Part 76 of 76)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Valuest
Alarm1

Alarm2
Border
Range

Range

Range

Units
Type
Parameter

or
ValueMinimum Y con undef undef undef set by coll graph number

Displays the lowest value in any MBean being monitored

by this condition. JMX Discovery runs a thread that
updates parameter values on a flexible schedule, as
needed.

Required Configuration is basic.

Collector: JMX Discovery

ValueSum Y con undef undef undef set by coll graph number

Displays the total value of all MBeans being monitored by

this condition. JMX Discovery runs a thread that updates
parameter values on a flexible schedule, as needed.

Required Configuration is basic.

Collector: JMX Discovery

PATROL for Check Point FireWall-1 2.0.01

Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 1 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FW_FIREWALL Application Class
kmAdvisor Y std NA NA NA 60 sec text none

Displays the current status of the knowledge module.

This parameter does not provide the status of the Check
Point Management Module or any of the firewall
modules.
FW1_MGMT_MODULE Application Class
collectorCol Y coll NA NA NA 60 sec text none

Collector parameter for the Check Point Management

Module. This parameter is used to set up connections to
the collector binaries (fw_col, fw_objects, fw_objects_ng,
and fw_diskcheck). It creates instances for the monitored
firewalls. It also creates other instances for application
classes, which are created under the FW1_FW_MODULE
instance (for example, FW1_DoS_Attacks).
inAcceptedLogs Y con NA NA NA set by graph number of log entries
mgmtLogCol (60
Graphs the number of inbound accepted log entries for all sec)
the firewall modules that are connected to the Check
Point Management Module.

Collector: mgmtLogCol

PATROL Parameter Reference Manual 113

PATROL Parameter Reference Manual 114

Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 2 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
inDroppedLogs Y con NA NA NA set by graph number of log entries
mgmtLogCol (60
Graphs the number of inbound dropped log entries for all sec)
the firewall modules that are connected to the Check
Point Management Module.

Collector: mgmtLogCol
inTotalLogs Y con NA NA NA set by graph number of log entries
mgmtLogCol (60
Graphs the total number of inbound log entries for all the sec)
firewall modules that are connected to the Check Point
Management Module.

Collector: mgmtLogCol
mgmtLogCol Y coll NA NA NA 60 sec none none

Collects information associated with the accepted and

dropped log entries at the Check Point Management
Module level.
mgmtRuleLogCol Y coll NA NA NA 60 sec none none

Collects all the information associated with the rules at

the Check Point Management Module level.
outAcceptedLogs Y con NA NA NA set by graph number of log entries
mgmtLogCol (60
Graphs the number of outbound accepted log entries for sec)
all the firewall modules that are connected to the Check
Point Management Module.

Collector: mgmtLogCol
Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 3 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
outDroppedLogs Y con NA NA NA set by graph number of log entries
mgmtLogCol (60
Graphs the number of outbound dropped log entries for sec)
all the firewall modules that are connected to the Check
Point Management Module.

Collector: mgmtLogCol
outTotalLogs Y con NA NA NA set by graph number of log entries
mgmtLogCol (60
Graphs the total number of outbound log entries for all sec)
the firewall modules that are connected to the Check
Point Management Module.

Collector: mgmtLogCol
sinceLastLog Y con 0-60 0-14 14-60 set by graph number of log entries
alarm ok warn mgmtLogCol (60
Graphs the number of seconds since a log has been sec)
posted into the Check Point log.

Collector: mgmtLogCol
FW1_DoS_ATTACKS Application Class
DoSCol Y coll NA NA NA 60 sec none none

Compiles the DoS attack information and populates the

consumer parameters.
portScan Y con NA 0-0 1–1 set by graph none
ok alarm DoSCol
Alarms when a port scan attack is potentially occurring. (60 sec)
This is based on the configuration of the parameter. The
default is 5 different ports in 5 minutes from the same
source host.

Collector: DoSCol

PATROL Parameter Reference Manual 115

PATROL Parameter Reference Manual 116

Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 4 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
smurf Y con NA 0-0 1–1 set by graph none
ok alarm DoSCol
Alarms when a smurf attack is potentially occurring. This (60 sec)
is based on the configuration of the parameter. The
default is 25 ICMP packets within 5 seconds to the same
destination.

Collector: DoSCol
spoof Y con NA 0-0 1–1 set by graph none
ok alarm DoSCol
Alarms when a spoof attack is potentially occurring. (60 sec)

Collector: DoSCol
FW1_MgmtModStatus Application Class
fwState Y std NA 0–0 1–1 60 sec graph number of sec
ok alarm
Displays the overall status of the Check Point
Management Module.
remainingDiskPercentage Y con 0–5 0–3 3–5 set by graph percentage of
alarm warn fwModDiskCol available disk space
Graphs the amount of disk space available, in a (60 sec)
percentage, for the disk partition where the Check Point
logs are written.

Collector: fwModDiskCol
remainingDiskSpace Y con undef undef undef set by graph MB of available disk
fwModDiskCol space
Graphs the amount of disk space available, in megabytes, (60 sec)
for the disk partition where the Check Point logs are
written.

Collector: fwModDiskCol
Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 5 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
estTimeUntilDiskFull Y con 0–60 0–31 31–60 set by graph min until disk is full
alarm warn fwModDiskCol
Graphs the estimated amount of time, in minutes, before (60 sec)
the disk is full based on the current usage.

Collector: fwModDiskCol
fwModDiskCol Y coll NA NA NA 60 sec text none

Collects information about the FW1_MgmtModStatus

application class.
FW1_DEBUG Application Class
remainingDiskPercentage Y con 0–5 0–3 3–5 set by NA percentage of total
alarm warn debugDiskCol disk space
Graphs the amount of disk space available where the (60 sec)
debug logs are written. The value is a percent of the total
amount of disk space on the disk.

Collector: debugDiskCol
remainingDiskSpace Y con undef undef undef set by graph MB of available disk
debugDiskCol space
Graphs the amount of disk space available, in megabytes, (60 sec)
for the disk partition where the debug logs are written.

Collector: debugDiskCol
estTimeUntilDiskFull Y con 0–60 0–31 31–60 set by graph min until disk is full
alarm warn debugDiskCol
Graphs the amount of time, based on current usage, (60 sec)
before the disk partition is full. This parameter monitors
the disk partition where the debug logs are written.

Collector: debugDiskCol
debugDiskCol Y coll NA NA NA 60 sec none none

Collects information on the total disk space.

PATROL Parameter Reference Manual 117

PATROL Parameter Reference Manual 118

Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 6 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FW1_Objects Application Class
userCol Y coll NA NA NA 1 hour none none

Collects information on monitored users.

policyContCol Y coll NA NA NA 60 sec none none

Creates or destroys the instances of

FW1_OBJECT_POLICY that are monitored.
daysUntilNextUserExpiry Y con NA NA NA set by graph number of days
userCol
Displays the number of days until the next user ID (1 hour)
expires.

Collector: userCol
adminChanges Y std 0-0 0-0 NA 1 hour stopligh number of changes
alarm ok t
Displays the number of changes to the administrators
since the last discovery cycle. This parameter goes into
alarm when changes occur to the administrators of the
Check Point Management Module.
expiredUsers Y con 0-0 0-0 NA set by graph number of user IDs
alarm ok userCol
Graphs the number of expired users IDs. (1 hour)

Collector: userCol
userChanges Y con 0-0 0-0 NA set by stopligh number of changes
alarm ok userCol t
Displays the number of changes to the users since the last (1 hour)
discovery cycle.

Collector: userCol
networkObjectChanges Y std 0-0 0-0 NA 1 hour stopligh number of changes
alarm ok t
Displays the number of changes to the network objects
since the last discovery cycle.
Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 7 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FW1_OBJECT_POLICY Application Class
numOfChanges Y std 0-0 NA NA 360 graph number of changes to
alarm sec the policy
Displays the number of changes to the monitored policy
since the last discovery cycle. If there are any changes to
the policy, the parameter goes into alarm.
FW1_FW_MODULE Application Class
fwdLogCol Y coll NA NA NA 60 sec none none

Collector parameter that collects the log information for

the firewall module. This parameter collects the
information associated with the accepted and dropped
log entries.
fwRuleLogCol Y coll NA NA NA 60 sec none none

Collector parameter that collects all the information

associated with all the monitored rules at the firewall
module level.
fwStatus Y con 0-2 1-1 202 set by stopligh none
ok warn alarm policyInfoCol (60 t
Displays the overall status of the firewall module. This sec)
parameter monitors changes to the policies that are
installed on the firewall and alarms on changes to the
install date, install time, or the policy that is installed.

Collector: policyInfoCol
inAcceptedLogs Y con NA NA NA set by graph number of log entries
fwdLogCol
Graphs the number of inbound accepted log entries for (60 sec)
the firewall module that is being monitored.

Collector: fwdLogCol

PATROL Parameter Reference Manual 119

PATROL Parameter Reference Manual 120

Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 8 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
inDroppedLogs Y con NA NA NA set by graph number of log entries
fwdLogCol
Graphs the number of inbound dropped log entries for (60 sec)
the firewall module that is being monitored.

Collector: fwdLogCol
inTotalLogs Y con NA NA NA set by graph number of log entries
fwdLogCol
Graphs the total number of log entries for the firewall (60 sec)
module that is being monitored.

Collector: fwdLogCol
nicCol Y coll NA NA NA 60 sec none none

Collector parameter that discovers which network cards

are installed on the firewall computer if SNMP is enabled
on the firewall module and the user has configured it in
the KM.
outAcceptedLogs Y con NA NA NA set by graph number of log entries
fwdLogCol
Graphs the number of outbound accepted log entries for (60 sec)
the firewall module that is being monitored.

Collector: fwdLogCol
outDroppedLogs Y con NA NA NA set by graph number of log entries
fwdLogCol
Graphs the number of outbound dropped log entries for (60 sec)
the firewall module that is being monitored.

Collector: fwdLogCol
outTotalLogs Y con NA NA NA set by graph number of log entries
fwdLogCol
Graphs the total number of outbound log entries for the (60 sec)
firewall module that is being monitored.

Collector: fwdLogCol
Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 9 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
policyInfoCol Y coll NA NA NA 60 sec none none

Collector parameter that collects the policy status

information for the firewall module.
sinceLastLog Y con 0-60 0-14 14-60 set by graph number of sec
alarm ok warn fwdLogCol
Graphs the amount of time in seconds since the last log (60 sec)
entry for the firewall module.This might indicate possible
problems with the firewall.

Collector: fwdLogCol
PingAvailability Y std 0–2 1–1 2–2 300 sec stopligh none
warn alarm t
Graphs the ping test showing whether it is successful or
not.
FW1_SPECIFIC Application Class
inAcceptedLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of inbound accepted log entries for (60 sec)
the specific object that is being monitored.

Collector: specificLogCol
inDroppedLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of inbound dropped log entries for (60 sec)
the specific object that is being monitored.

Collector: specificLogCol
inTotalLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of total inbound log entries for the (60 sec)
specific object that is being monitored.

Collector: specificLogCol

PATROL Parameter Reference Manual 121

PATROL Parameter Reference Manual 122

Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 10 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
outAcceptedLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of outbound accepted log entries for (60 sec)
the specific object that is being monitored.

Collector: specificLogCol
outDroppedLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of outbound dropped log entries for (60 sec)
the specific object that is being monitored.

Collector: specificLogCol
outTotalLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of total outbound log entries for the (60 sec)
specific object that is being monitored.

Collector: specificLogCol
sinceLastLog Y con NA NA NA set by graph number of sec
specificLogCol
Graphs the number of seconds since a log has been (60 sec)
posted into the Check Point log for the specific object.

Collector: specificLogCol
specificLogCol Y coll NA NA NA 60 sec none none

Collector parameter that collects the log information for

the specific object. This parameter collects the
information associated with the accepted and dropped
log entries.
FW1_NIC Application Class
nicStatusCol Y coll NA NA NA 60 sec none none

Collector parameter for the network interface card (NIC)

information. This information is based on the SNMP MIB.
Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 11 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
bandwidthUtil Y con NA NA NA set by graph percent of
nicStatusCol (60 utilization
Graphs the percentage of utilization for the network card sec)
being monitored. This percentage is based on throughput
of the NIC and the amount of traffic passing through the
NIC.

Collector: nicStatusCol
operStatus Y con NA NA NA set by stopligh none
nicStatusCol (60 t
Displays the current state of the interface. The status can sec)
be up, down, or testing.

Collector: nicStatusCol
adminStatus Y con NA NA NA set by stopligh none
nicStatusCol (60 t
Displays the desired state of the interface. The status can sec)
be up, down, or testing.

Collector: nicStatusCol
inErrors Y con NA NA NA set by graph number of
nicStatusCol (60 packets
Graphs the number of inbound packets discarded sec)
because of errors.

Collector: nicStatusCol
inOctets Y con NA NA NA set by graph number of bytes
nicStatusCol (60
Graphs the total number of bytes received, including sec)
framing characters.

Collector: nicStatusCol

PATROL Parameter Reference Manual 123

PATROL Parameter Reference Manual 124

Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 12 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
outErrors Y con NA NA NA set by graph number of packets
nicStatusCol (60
Graphs the number of outbound packets discarded sec)
because of errors.

Collector: nicStatusCol
outOctets Y con NA NA NA set by graph number of bytes
nicStatusCol (60
Graphs the total number of outbound bytes, including sec)
framing characters.

Collector: nicStatusCol
FW1_RULELOGS Application Class
inAcceptedLogs Y con NA NA NA set by graph number of entries
fwdLogCol and
Graphs the number of inbound accepted log entries for mgmtRuleLogCol
the specific rule that is being monitored. (60 sec)

Collector: fwdLogCol and mgmtRuleLogCol

inDroppedLogs Y con NA NA NA set by graph number of entries
fwdLogCol and
Graphs the number of inbound dropped log entries for mgmtRuleLogCol
the specific rule that is being monitored. (60 sec)

Collector: fwdLogCol and mgmtRuleLogCol

outAcceptedLogs Y con NA NA 100-100 set by graph number of entries
ok fwdLogCol and
Graphs the number of outbound accepted log entries for mgmtRuleLogCol
the specific rule that is being monitored. (60 sec)

Collector: fwdLogCol and mgmtRuleLogCol

Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 13 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
outDroppedLogs Y con NA NA NA set by graph number of entries
fwdLogCol and
Graphs the number of outbound dropped log entries for mgmtRuleLogCol
the specific rule that is being monitored. (60 sec)

Collector: fwdLogCol and mgmtRuleLogCol

sinceLastLog Y con NA NA NA set by graph number of entries
fwdLogCol and
Graphs the number of seconds since a log has been mgmtRuleLogCol
posted into the Check Point log for the specific rule. (60 sec)

Collector: fwdLogCol and mgmtRuleLogCol

FW1_SPECIFIC_CONT Application Class
specificCol Y coll NA NA NA 60 sec none none

Creates and destroys the specified objects being

monitored for the specific type.
InstancesCount Y std undef undef undef 300 sec graph number of unique
objects
Displays the number of unique objects found during the
last discovery cycle for the specific type.
FW1_SPECIFIC Application Class
specificLogCol Y coll NA NA NA 60 sec none none

Collects the information associated with the accept and

dropped log entries for the specific report.
sinceLastLog Y con NA NA NA set by graph number of sec
specificLogCol
Graphs the number of seconds since a log has been (60 sec)
posted into the Check Point Log for the specific object
being monitored.

Collector: specificLogCol

PATROL Parameter Reference Manual 125

PATROL Parameter Reference Manual 126

Table 5 PATROL for Check Point FireWall-1 2.0.01 (Part 14 of 14)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
outAcceptedLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of outbound accepted log entries for (60 sec)
the specific object being monitored.

Collector: specificLogCol
inAcceptedLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of inbound accepted log entries for (60 sec)
the specific object that is being monitored.

Collector: specificLogCol
outDroppedLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of outbound dropped log entries for (60 sec)
the specific object that is being monitored.

Collector: specificLogCol
inDroppedLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of inbound dropped log entries for (60 sec)
the specific object that is being monitored.

Collector: specificLogCol
inTotalLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of total inbound log entries for the (60 sec)
specific object that is being monitored.

Collector: specificLogCol
outTotalLogs Y con NA NA NA set by graph number of entries
specificLogCol
Graphs the number of total outbound log entries for the (60 sec)
specific object that is being monitored.

Collector: specificLogCol
PATROL Parameter Reference Manual 127
PATROL Parameter Reference Manual 128
PATROL for Cisco Secure PIX Firewall 1.1.00

Table 6 PATROL for Cisco Secure PIX Firewall 1.1.00 (Part 1 of 5)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PIX_MODULE Application Class
DiskSpaceRemaining Y std 0–5 0–3 3–5 120 sec gauge percent

Indicates the amount of disk space used on the agent

machine as a percentage.
PIX_DEVICE Application Class
BufferLogging Y con undef undef undef upon disc text not applicable

Indicates whether buffer logging is currently on or off, at

what level it is set, and the current number of messages.
ConnectionsMade Y con undef undef undef upon disc graph number of
connections made to
Graphs the number of connections made to the PIX the PIX device
device. This information is derived from the PIX log file.
ConsoleLogging Y con undef undef undef upon disc text not applicable

Indicates whether console logging is currently on or off,

at what level it is set, and the current number of
messages.
DeniedConnections Y con undef undef undef upon disc graph number of denied
connections
Graphs the number of connections that were derived
during the current discovery cycle. This information is
derived from the PIX log file.
FreeMemory Y con undef undef undef upon disc graph total free memory
space in bytes
Reports total free memory space.

PATROL Parameter Reference Manual 129

PATROL Parameter Reference Manual 130

Table 6 PATROL for Cisco Secure PIX Firewall 1.1.00 (Part 2 of 5)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LINKPortStatus Y con none 0–0 1–1 upon disc Boolean not applicable

Indicates the status of the COM port link or the TCP

socket link (on or off). LINKPortStatus activates an alarm
if the PIX device is offline (for example, because of a loss
of power) or if the communication port (TCP or serial) is
down.
LogExport Y con undef undef undef upon disc text not applicable

Displays IP addresses for log file export.

LogMessages Y con undef undef undef upon disc graph number of log
messages present
Graphs the number of log messages present.
MonitorLogging Y con undef undef undef upon disc text not applicable

Indicates whether monitor logging is currently on or off,

at what level it is set, and the current number of
messages.
PasswordAlert Y con 0–100 1–3 3–100 upon disc graph number of
PIX_DEVICE
Tracks the number of PIX_DEVICE password faults. This password faults
information is derived from the PIX log file.
SecurityAlert Y con 0–100 1–3 3–100 upon disc graph number of security
faults
Tracks the number of PIX_DEVICE security faults. This
information is derived from the PIX log file.
SpoofAlert Y con 0–100 1–3 3–100 upon disc graph number of spoof
attacks
Tracks the number of spoof attacks.
SyslogLogging Y con undef undef undef upon disc text not applicable

Indicates whether syslog logging is currently on or off.

Table 6 PATROL for Cisco Secure PIX Firewall 1.1.00 (Part 3 of 5)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TimeStampLogging Y con undef undef undef upon disc graph not applicable

Indicates whether time stamp logging is currently on or

off.
TrapLogging Y con undef undef undef upon disc text not applicable

Indicates whether trap logging is currently on or of, at

what level it is set, and the current number of messages.
PIX_INTERFACE Application Class
Abort Y con undef undef undef upon disc graph number of aborted
packet errors on the
Graphs the number of aborted packet errors on the interface
interface.
Babbles Y con undef undef undef upon disc graph number of babble
errors on the
Graphs the number of babble errors on the interface. interface
Collisions Y con undef undef undef upon disc graph number of packet
collision errors on the
Graphs the number of packet-collision errors on the interface
interface.
CRC Y con undef undef undef upon disc graph number of CRCs
received on the
Graphs the number of CRCs (cyclic redundancy checks) interface
received on the interface.
Deferred Y con undef undef undef upon disc graph number of deferred
delivery packet
Graphs the number of deferred delivery packet errors on errors on the
the interface. interface
Frame Y con undef undef undef upon disc graph number of frame
errors received on the
Graphs the number of frame errors received on the interface
interface.

PATROL Parameter Reference Manual 131

PATROL Parameter Reference Manual 132

Table 6 PATROL for Cisco Secure PIX Firewall 1.1.00 (Part 4 of 5)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Giants Y con undef undef undef upon disc graph number of giants
received on the
Graphs the number of giants received on the interface. interface
Ignored Y con undef undef undef upon disc graph number of ignored-
packet errors on the
Graphs the number of ignored-packet errors on the interface
interface.
InputBroadcasts Y con undef undef undef upon disc graph number of broadcasts
received on the
Graphs the number of broadcasts received on the interface
interface.
InputBytes Y con undef undef undef upon disc graph number of bytes
received
Graphs the number of bytes received on the interface.
InputErrors Y con undef undef undef upon disc graph number of input
errors occurring on
Graphs the number of input errors occurring on the the interface
interface.
InputPackets Y con undef undef undef upon disc graph number of packets
received on the
Graphs the number of packets received on the interface. interface
InterfaceResets Y con undef undef undef upon disc graph number of interface
rest errors on the
Graphs the number of interface-reset errors. interface
LateCollisions Y con undef undef undef upon disc graph number of late-
collision errors on the
Graphs the number of late-collision errors on the interface
interface.
LineStatus Y con undef undef undef upon disc Boolean not applicable

Displays the line status of the interface card.

LostCarrier Y con undef undef undef upon disc graph number of lost-
carrier errors on the
Graphs the number of lost-carrier errors on the interface. interface
Table 6 PATROL for Cisco Secure PIX Firewall 1.1.00 (Part 5 of 5)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NICStatus Y con undef undef undef upon disc Boolean not applicable

Displays the status of the interface card.

NoBuffer Y con undef undef undef upon disc graph number of no-buffer
errors on the
Graphs the number of no-buffer errors on the interface. interface
NoCarrier Y con undef undef undef upon disc graph number of no-carrier
errors on the
Graphs the number of no-carrier errors on the interface. interface
OutputBytes Y con undef undef undef upon disc graph number of bytes sent

Graphs the number of bytes sent on the interface.

OutputErrors Y con undef undef undef upon disc graph number of output
errors occurring on
Graphs the number of output errors occurring on the the interface
interface.
OutputPackets Y con undef undef undef upon disc graph number of packets
sent on the interface
Graphs the number of packets sent on the interface.
OverRuns Y con undef undef undef upon disc graph number of overrun
errors received on the
Graphs the number of overrun errors received on the interface
interface.
Runts Y con undef undef undef upon disc graph number of runts
received on the
Graphs the number of runts received on the interface. interface
UnderRuns Y con undef undef undef upon disc graph number of underrun
errors received on the
Graphs the number of underrun errors received on the interface
interface.

PATROL Parameter Reference Manual 133

PATROL Parameter Reference Manual 134
PATROL for Compaq Insight Manager 1.5.04

hi

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 1 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
PATROL_for_CIM Application Class
Connection_Errors see con NA NA NA NA text NA
Parameter
During pre-discovery and discovery checks will be made descriptio
to see if SNMP is enabled. If SNMP is not enabled this n for
parameter is set active and populated with a generic error details
message. This parameter is a text box parameter. If SNMP
is functioning, the parameter is set inactive and will not
appear.
CPQCLRAID Application Class
_cpqClRaidCntlrColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQCLRAID application class.
_cpqClRaidCntlrSummColl Y coll NA NA NA 3 min none NA

Collects information for the consumer parameters in the

CPQCLRAID application class.
_cpqClRaidLogDrvCondColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQCLRAID application class.
_cpqClRaidLogDrvSumColl Y coll NA NA NA 23 hr 59 min none NA

Collects information for the consumer parameters in the

CPQCLRAID application class.

PATROL Parameter Reference Manual 135

PATROL Parameter Reference Manual 136

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 2 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
_cpqClRaidPhyDrvCondColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQCLRAID application class.
_cpqClRaidPhyDrvSummColl Y coll NA NA NA 23 hr 59 min none NA

Collects information for the consumer parameters in the

CPQCLRAID application class.
CPQCLRAIDCNTLR Application Class
cpqCRCondCntlr Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors clustered RAID array controller condition. 2 - OK,
3 - degraded,
Collector: _cpqClRaidCntlrColl 4 - failed
cpqCRSumCntlr N con NA NA NA set by coll text NA

Monitors clustered RAID summary information.

Collector: _cpqClRaidCntlrSummColl
CPQCLRAIDEMU Application Class
_cpqCLRaidEmuColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQCLRAIDEMU application class.
cpqCREmuBoardTemp N con undef undef undef set by coll graph degrees Fahrenheit

Monitors clustered Raid EMU system board temperature

(F).

Collector: _cpqCLRaidEmuColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 3 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqCREmuCond Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors clustered Raid EMU overall condition. 2 - OK,
3 - degraded,
Collector: _cpqCLRaidEmuColl 4 - failed
cpqCREmuCondFan Y con 1–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - other,
Monitors clustered RAID EMU primary enclosure overall range 2 - OK,
fan condition. 3 - degraded,
4 - failed
Collector: _cpqCLRaidEmuColl
cpqCREmuCondPwrSup Y con 1–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - other,
Monitors clustered RAID EMU primary enclosure power range 2 - OK,
supply overall condition. 3 - degraded,
4 - failed
Collector: _cpqCLRaidEmuColl
cpqCREmuCondTemp Y con 1–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - other,
Monitors clustered RAID EMU primary enclosure range 2 - OK,
temperature condition. 3 - degraded,
4 - failed
Collector: _cpqCLRaidEmuColl
cpqCREmuEncTemp N con undef undef undef set by coll graph degrees Fahrenheit

Monitors clustered RAID EMU primary enclosure

temperature (F).

Collector: _cpqCLRaidEmuColl
cpqCREmuStatusBoardTemp N con 1–8 4–5 6–7 set by coll stoplight number
OK if out of warn alarm 1,3, 8 - OK,
Monitors clustered RAID system board temperature range 4,5 - warn,
status. 6,7 - alarm

Collector: _cpqCLRaidEmuColl

PATROL Parameter Reference Manual 137

PATROL Parameter Reference Manual 138

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 4 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqCREmuStatusEncTemp N con 1–8 4–5 6–7 set by coll stoplight number
OK if out of warn alarm 1,3, 8 - OK,
Monitors clustered RAID enclosure temperature status. range 4,5 - warn,
6,7 - alarm
Collector: _cpqCLRaidEmuColl
cpqCREmuStatusFan Y con 1–4 3 undef set by coll stoplight number
OK if out of alarm 1 - other,
Monitors clustered RAID EMU primary enclosure fan range 2 - OK,
status. 3 - critical,
4 - unknown
Collector: _cpqCLRaidEmuColl
cpqCREmuStatusPwrSup Y con 1–4 3 4 set by coll stoplight number
OK if out of alarm warn 1 - other,
Monitors clustered RAID EMU primary enclosure power range 2 - OK,
supply status. 3 - critical,
4 - not installed
Collector: _cpqClRaidExpCabColl
cpqCREmuStatusTemp Y con 1–4 3 4 set by coll stoplight number
OK if out of alarm warn 1 - other,
Monitors clustered RAID EMU primary enclosure range 2 - OK,
temperature status. 3 - critical,
4 - non-crit,
Collector: _cpqClRaidExpCabColl 5 - unknown
cpqCREmuTemp Y con undef unef undef set by coll graph degrees Celsius

Monitors clustered RAID EMU primary enclosure

temperature (C)..

Collector: _cpqCLRaidEmuColl
CPQCLRAIDEXP Application Class
_cpqClRaidExpCabColl Y coll NA NA NA 60 sec NA NA

Collects information for the consumer parameters in the

CPQCLRAIDEXP application class.
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 5 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqCRExpCond Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors clustered RAID expansion cabinet overall 2 - OK,
condition. 3 - degraded,
4 - failed
Collector: _cpqClRaidExpCabColl
cpqCRExpCondFan Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors clustered RAID expansion cabinet fan 2 - OK,
condition. 3 - degraded,
4 - failed
Collector: _cpqClRaidExpCabColl
cpqCRExpCondPwrSup Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors clustered RAID expansion cabinet power 2 - OK,
supply condition. 3 - degraded,
4 - failed
Collector: _cpqClRaidExpCabColl
cpqCRExpCondTemp Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors clustered RAID expansion cabinet power 2 - OK,
supply temperature. 3 - degraded,
4 - failed
Collector: _cpqClRaidExpCabColl
cpqCRExpStatusFan Y con 1–4 4 undef set by coll stoplight pages per second
OK if out of warn 1 - other,
Monitors clustered RAID expansion cabinet fan status. range 2 - OK,
4 - non-critical,
Collector: _cpqClRaidExpCabColl 5 - not installed,
6 - unknown

PATROL Parameter Reference Manual 139

PATROL Parameter Reference Manual 140

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 6 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqCRExpStatusPwrSup Y con undef 3 undef set by coll stoplight number
warn 1 - other,
Monitors clustered RAID expansion cabinet power 2 - OK,
supply status. 3 - noncritical,
5 - unknown
Collector: _cpqClRaidExpCabColl
cpqCRExpStatusTemp Y con 1–4 3 4 set by coll stoplight 1 - other,
OK if out of alarm warn 2 - OK,
Monitors clustered RAID expansion cabinet temperature range 3 - critical,
status. 4 - non-critical,
5 - not installed,
Collector: _cpqClRaidExpCabColl 6 - unknown
CPQCLRAIDLOGDRV Application Class
cpqCRCondLogDrv Y con undef 3 4 set by coll stoplight 1 - other,
warn alarm 2 - OK,
Monitors clustered RAID logical drive condition. 3 - degraded,
4 - failed
Collector: _cpqClRaidLogDrvCondColl
cpqCRStatusLogDrv Y con undef undef undef set by coll stoplight 1 - other,
2 - OK,
Monitors clustered RAID logical drive status. 3 - degraded,
4 - failed,
Collector: _cpqClRaidLogDrvCondColl 5 - reconst
(The RAID set is
regenerating a failed
physical drive's data
onto a replacement
drive that is part of
the RAIDset), 6 - init
(The controller is
writing its file
structure onto the
RAID set's member
devices)
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 7 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqCRSummLogDrv N con undef undef undef set by coll text NA

Monitors clustered RAID logical drive summary

information.

Collector: _cpqClRaidLogDrvSumColl
CPQCLRAIDPARTITION Application Class
cpqCRCondPart Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors clustered RAID logical drive partition 2 - OK,
condition. 3 - degraded,
4 - failed
Collector: _cpqClRaidPhyDrvCondColl
cpqCRStatusPart Y con undef undef undef set by coll stoplight number
1 - other,
Monitors clustered RAID logical drive partition status. 2 - OK,
3 - degraded,
Collector: _cpqClRaidPhyDrvCondColl 4 - failed,
5 - recons.,
6 - init
CPQCLRAIDPHYDRV Application Class
cpqCRCondPhyDrv Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors clustered RAID physical drive condition. 2 - OK,
3 - degraded,
Collector: _cpqClRaidPhyDrvCondColl 4 - failed
cpqCRCondSpare N con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors clustered RAID spare drive condition. 2 - OK,
3 - degraded,
Collector: _cpqClRaidPhyDrvCondColl 4 - failed

PATROL Parameter Reference Manual 141

PATROL Parameter Reference Manual 142

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 8 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqCRSumPhyDrv N con undef undef undef set by coll text NA

Monitors clustered RAID physical drive summary

information.

Collector: _cpqClRaidPhyDrvSummColl
cpqCRSumSpare N con undef undef undef set by coll text NA

Monitors clustered RAID spare drive summary

information.

Collector: _cpqClRaidPhyDrvSummColl
CPQCONFIGURATION Application Class
cpqConfigASR Y std undef undef undef 23 hr 59 min text NA

Provides the settings for the Automatic Server Recovery

(ASR) options as well as the fan degradation recovery
actions.
cpqConfigExpBoards N std undef undef undef 23 hr 59 min text NA

Contains summary information for the expansion boards.

cpqConfigLogs Y std undef undef undef 37 min text NA

Monitors the Integrated Management Log (IML) as

reported by the Compaq Insight Manager product. Part
of the functionality for this parameter is to warn/alarm
based on the contents of the IML. There is a built in
default warn/alarm capability that may be overridden.
cpqConfigSecurity N std undef undef undef 23 hr 59 min text NA

Describes how the security features on the server are

configured.
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 9 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqConfigStorage Y std undef undef undef 23 hr 59 min text NA

Contains summary information for the various storage

devices on the server. This includes diskette drive size,
system volume information, disk, and controller
information.
cpqConfigSysInfo Y std undef undef undef 23 hr 59 min text NA

Contains summary information for the system. The

information is further divided into sections (System
Information, ROM Information, Memory Board
Information, Processor Information, and System Port
Information).. If information for a particular section is
absent from a server then it will not appear in the output
text.
CPQCPU Application Class
_CPQCPUColl Y coll NA NA NA 5 min NA NA

Collects information for the consumer parameters in the

CPQCPU application class.
cpqCpuUtilFiveMin Y con undef 80–90 90–100 set by coll graph percent
warn alarm
Provides the CPU utilization as a percent of the
theoretical maximum during the last five minutes.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _CPQCPUColl

PATROL Parameter Reference Manual 143

PATROL Parameter Reference Manual 144

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 10 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqCpuUtilThirtyMin Y con undef 80–90 90–100 set by coll graph percent
warn alarm
Provides the CPU utilization as a percent of the
theoretical maximum during the last thirty minutes.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _CPQCPUColl
CPQCPUHLTH Application Class
cpqCpuHlthStatus Y con 2–5 3 4–5 set by coll stoplight none
warn out of warn alarm 1 - other,
Monitors status of the CPU as reported by Compaq range 2 - OK,
Insight Manager. If status reporting is not supported by 3 - degraded,
Compaq Insight Manager this parameter will be set to 4 - failed,
OFFLINE. 5 - disabled

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _HLTHCondColl
cpqCpuHlthSummary N con undef undef undef set by coll text NA

Provides a summary of CPU information, including CPU

name, speed, designer, step, and socket.

Collector: cpqNumOfCPUs
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 11 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqCpuHlthThreshold Y con undef 3 undef set by coll stoplight none
alarm 1 - unsupported,
Displays CPU self-correcting error threshold status. 2 - OK,
Excessive corrected internal errors can predict future 3 - alarm
hard processor failures. Compaq Insight Manager will set
this attribute if an internal processor error threshold is
passed. If status reporting is not supported by Compaq
Insight Manager this parameter will be set to OFFLINE.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _HLTHCondColl
CPQFAN Application Class
cpqHeFanStatus Y con 1–4 3 4 set by coll stoplight number
warn when out warn alarm 1 - other,
Monitors whether the fan is operating properly. of range 2 - OK,
3 - degraded,
Recovery Actions: If the parameter enters a warning or 4 - failed
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _HLTHCondColl

PATROL Parameter Reference Manual 145

PATROL Parameter Reference Manual 146

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 12 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
CPQFCAACCEL Application Class
cpqFcaAccelBatteryStatus Y con undef 4 5 set by coll gauge number
alarm warn 1 - other,
Monitors the status of each battery pack on the Compaq 2 - OK,
Fiber Channel Array Accelerator board. The batteries can 3 - charging (OK),
recharge only when the system has power applied. 4 - failed,
5 - degraded,
Recovery Actions: If the parameter enters a warning or 6 - not present
alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _FCAAccelCondColl
cpqFcaAccelCondition Y con undef 3 4 set by coll stoplight number
warm alarm 1 - other,
Monitors the overall condition of the Compaq Fiber 2 - OK,
Channel Array Accelerator board. 3 - degraded,
4 - failed
Recovery Actions: If the parameter enters a warning or
alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _FCAAccelCondColl
cpqFcaAccelReadErrors N con undef undef undef set by coll graph errors

Provides the number of read memory parity errors that

were detected while reading from the Array Accelerator
board.

Collector: _FCAAccelCondColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 13 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqFcaAccelWriteErrors N con undef undef undef 1 min graph errors

Provides the total number of write memory parity errors

that were detected while writing to the Array Accelerator
board.

Collector: _FCAAccelCondColl
cpqFcaStatusAccel Y con undef undef undef set by coll stoplight number
1 - other, 2 - invalid, 3
Monitors fibre channel array accelerator board status. - enabled, 4 -
temporarily disabled,
Collector: _FCAAccelCondColl 5 - permanently
disabled
cpqFcaSumAccel N con undef undef undef set by coll text NA

Monitors fibre channel array accelerator summary

information.

Collector: _FCAAccelCondColl
CPQFCACHCOND Application Class
cpqFCAChChassisCond Y con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array overall chassis condition. range 2 - OK,
3 - warning,
Collector: _FCAChCondColl 4 - failed
cpqFCAChCntlrCond Y con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array chassis overall controller range 2 - OK,
condition. 3 - warning,
4 - failed
Collector: _FCAChCondColl

PATROL Parameter Reference Manual 147

PATROL Parameter Reference Manual 148

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 14 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqFCAChFanCond Y con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array chassis overall fan range 2 - OK,
condition. 3 - warning,
4 - failed
Collector: _FCAChCondColl
cpqFCAChLogDrvCond Y con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array chassis logical drive overall range 2 - OK,
condition. 3 - warning,
4 - failed
Collector: _FCAChCondColl
cpqFCAChPhyDrvCond Y con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1- not recognized,
Monitors FCA chassis overall physical drive condition. range 2 - OK,
3 - warning,
Collector: _FCAChCondColl 4 - failed
cpqFCAChPwrSupCond Y con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array chassis overall power range 2 - OK,
supply condition. 3 - warning,
4 - failed
Collector: _FCAChCondColl
cpqFCAChTempCond Y con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array chassis temperature range 2 - OK,
condition. 3 - warning,
4 - failed
Collector: _FCAChCondColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 15 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
CPQFCACHFANENTRY Application Class
cpqFCAChCondFan Y con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array chassis fan module range 2 - OK,
condition. 3 - warning,
4 - failed
Collector: _FCAChCondColl
cpqFCAChInstalledFan Y con undef undef undef set by coll bool true or false

Monitors fibre channel array fibre channel installed fan

module.

Collector: _FCAChCondColl
cpqFCAChStatusFan Y con 2–5 4 5 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array chassis fan module status. range 2 - OK,
3 - not installed,
Collector: _FCAChCondColl 4 - degraded,
5 - failed
CPQFCACHPSENTRY Application Class
cpqFCAChCondPwrSup Y con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array power supply condition. range 2 - OK,
3 - degraded,
Collector: _FCAChCondColl 4 - failed
cpqFCAChInstalledPS Y con undef undef undef set by coll bool true or false

Monitors fibre channel array fibre installed power

supply.

Collector: _FCAChCondColl

PATROL Parameter Reference Manual 149

PATROL Parameter Reference Manual 150

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 16 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqFCAChStatusPwrSup Y con undef 1 4 set by coll stoplight number
OK alarm 1 - not recognized,
Monitors fibre channel array power supply status. 2 - not installed,
3 - OK,
Collector: _FCAChCondColl 4 - failed
cpqFCAChUpsStatusPwrSup Y con 2–5 4 5 set by coll stoplight number
OK if out of alarm warn 1 - not recognized,
Monitors fibre channel uninterruptible power supply range 2 - none,
(UPS). 3 - OK,
4 - failed,
Collector: _FCAChCondColl 5 - low battery
CPQFCACHTEMPENTRY Application Class
cpqFCAChCondTemp Y con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array chassis temperature probe range 2 - not installed,
condition. 3 - degraded,
4 - failed
Collector: _FCAChCondColl
cpqFCAChCurrTemp Y con undef undef undef set by coll gauge degrees Celsius

Monitors fibre channel array chassis temperature probe

current temperature (C).

Collector: _FCAChCondColl
cpqFCAChStatusTemp Y con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array chassis temperature probe range 2 - not installed,
status. 3 - degraded,
4 - failed
Collector: _FCAChCondColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 17 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
CPQFCACNTLR Application Class
cpqFcaCntlrCondition Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors the overall condition of a Compaq Fiber 2 - OK,
Channel Array Controller. 3 - degraded,
4 - failed
Recovery Actions: If the parameter enters a warning or
alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _FCACntlrCondColl
cpqFcaStatusCntlr Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors fibre channel array status controller summary. 2 - OK,
3 - failed,
Collector: _FCACntlrCondColl 4 - offline
cpqFcaSumCntlr N con undef undef undef set by coll text NA

Monitors fibre channel array controller summary.

Collector: _FCACntlrSumColl
CPQFCAHCENTRY Application Class
cpqFCACondHCntlr Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors fibre channel array host controller condition. 2 - OK,
3 - degraded,
Collector: _cpqFCAHCCondColl 4 - failed
cpqFCAOvCondHCntlr Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors fibre channel array host controller overall 2 - OK,
condition. 3 - degraded,
4 - failed
Collector: _cpqFCAHCCondColl

PATROL Parameter Reference Manual 151

PATROL Parameter Reference Manual 152

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 18 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqFCAStatusHCntlr Y con undef undef undef set by coll stoplight number
1 - other,
Monitors fibre channel array host controller status. 2 - OK,
3 - failed,
Collector: _cpqFCAHCCondColl 4 - sutdown,
5 - loop degraded,
6 - loop failed
cpqFcaSumHCntlr N con undef undef undef set by coll text NA

Monitors fibre channel array host controller summary

information.

Collector: _cpqFCAHCSumColl
CPQFCAHOSTCNTLR Application Class
_cpqFCAHCCondColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQFCAHOSTCNTLR application class.
_cpqFCAHCSumColl Y coll NA NA NA 13 min none NA

Collects information for the consumer parameters in the

CPQFCAHOSTCNTLR application class.
CPQFCALOGDRV Application Class
_FCALogDrvSumColl Y coll NA NA NA 7 min none NA

Collects information for the consumer parameters in the

cpqFCALogDrvSummary application class.
cpqFCALogDrvCondition Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors fibre channel array logical drive condition. 2 - OK,
3 - degraded,
Collector: _FCAChCondColl 4 - failed
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 19 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqFCALogDrvStatus Y con undef undef undef set by coll stoplight number
1 - other,
Monitors fibre channel array logical drive status. 2 - OK,
3 - failed,
Collector: _FCAChCondColl 4 - unconfigured,
5 - ercovering,
6 - ready for rebuild,
7 - rebuilding,
8 - wrong drive,
9 - bad connect,
10 - overheating,
11 - shutdown,
12 - expanding,
13 - not available,
14 - queued for
expansion,
15 - hard error
cpqFCALogDrvSummary N con undef undef undef set by coll text NA

Monitors fibre channel array logical drive summary.

Collector: _FCALogDrvSumColl
CPQFCAPHYDRV Application Class
_FCAPhyDrvSumColl Y coll NA NA NA 10 min none NA

Collects information for the consumer parameters in the

CPQFCAPHYDRV application class.
cpqFCACondPhyDrv Y con undef 3 4 set by coll stoplight number
warn alarm 1 - unable–determine,
Monitors fibre channel array physical drive condition. 2 - OK,
3 - degraded,
Collector: _FCAChCondColl 4 - failed

PATROL Parameter Reference Manual 153

PATROL Parameter Reference Manual 154

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 20 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqFCAFunc1PhyDrv N con undef 0–80 undef set by coll gauge percent
warn
Provides information about a series of tests that indicate
how well a physical drive works. These tests compare the
current operation of the physical drive and the operation
of the drive when it was new.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _FCAPhyDrvSumColl
cpqFCAFunc2PhyDrv N con undef 0–80 undef set by coll gauge percent
warn
Provides information about a series of tests that indicate
how well a physical drive works. These tests compare the
current operation of the physical drive and the operation
of the drive when it was new.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _FCAPhyDrvSumColl
cpqFCAFunc3PhyDrv N con undef 0–80 undef set by coll gauge percent
warn
Provides information about a series of tests that indicate
how well a physical drive works. These tests compare the
current operation of the physical drive and the operation
of the drive when it was new.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _FCAPhyDrvSumColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 21 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqFCASpareCond N con 2–4 3 4 set by coll stoplight number
OK if out of warn alarm 1 - not recognized,
Monitors fibre channel array spare drive overall range 2 - OK,
condition. 3 - degraded,
4 - failed
Collector: _FCAChCondColl
cpqFCASpareStatus Y con undef 3 4–5 set by coll stoplight number
alarm warn 1 - other,
Monitors fibre channel array spare drive status. 2 - inactive,
3 - failed,
Collector: _FCAChCondColl 4 - adr in process,
5 - active, adr done
cpqFCASpareSum Y con undef undef undef set by coll text NA

Monitors fibre channel array spare drive summary

information.

Collector: _FCAPhyDrvSumColl
cpqFCAStatusPhyDrv Y con undef 4 5–6 set by coll stoplight number
warn alarm 1 - not recognized,
Monitors fibre channel array physical drive status. 2 - unconfigured,
3 - OK,
Collector: _FCAChCondColl 4 - threshold
exceeded,
5 - predictive failure,
6 - failed
CPQFCASTORSYS Application Class
_FCAAccelCondColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQFCASTORSYS application class.

PATROL Parameter Reference Manual 155

PATROL Parameter Reference Manual 156

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 22 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
_FCAAccelSumColl Y coll NA NA NA 11 min none NA

Collects information for the consumer parameters in the

CPQFCASTORSYS application class.
_FCAChCondColl Y coll NA NA NA 7 min none NA

Collects information for the consumer parameters in the

CPQFCASTORSYS application class.
_FCACntlrCondColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQFCASTORSYS application class.
_FCACntlrSumColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQFCASTORSYS application class.
_FCALogDrvSumColl Y coll NA NA NA 7 min none NA

Collects information for the cpqFCALogDrvSummary

parameter.
_FCAPhyDrvSumColl Y coll NA NA NA 10 min none NA

Collects information for the consumer parameters in the

CPQFCAPHYDRV application class.
_FCAStorSysColl Y coll NA NA NA 11 min none NA

Collects information for the consumer parameters in the

CPQFCASTORSYS application class.
cpqFCAStorSysSumm N con undef undef undef set by the coll text NA

Monitors fibre channel array storage system summary.

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 23 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
CPQHLTH Application Class
_HLTHColl Y coll NA NA NA 13 min none NA

Collects information for the consumer parameters in the

CPQHLTH application class.
_HLTHCondColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQHLTH application class.
cpqAsrCondition Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors the overall condition of the Automatic Server 2 - OK,
Recovery feature. 3 - degraded,
4 - falied
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _HLTHCondColl
cpqCorrMemErrorDesc Y con undef undef undef set by coll text NA

Provides the text description of the memory error.

Collector: _HLTHColl
cpqCorrMemLogCondition Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors the overall condition of the correctable memory 2 - OK,
error log feature. 3 - degraded,
4 - falied
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _HLTHCondColl

PATROL Parameter Reference Manual 157

PATROL Parameter Reference Manual 158

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 24 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqCritLogCondition Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors the overall condition of the critical error log 2 - OK,
feature. 3 - degraded,
4 - falied
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _HLTHCondColl
cpqCriticalErrorDesc Y con undef undef undef set by coll text NA

Provides the text description of the critical error.

Collector: _HLTHColl
cpqNumOfCPUs Y std undef undef undef 7 min gauge CPUs

Provides notification, via standard Patrol alarm actions,

whenever the number of CPU's reported by CIM does not
match the historical count. It allows the user to see the
historical and current CPU count.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.
cpqPostMsgCondition Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors the overall condition of the POST error 2 - OK,
recording feature. 3 - degraded,
4 - falied
Recovery Actions: If the parameter enters a warning or
alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _HLTHCondColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 25 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqPostMsgDesc N con undef undef undef set by coll text NA

Provides the description of the POST error.

Collector: _HLTHColl
cpqThermalCondition Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors the overall condition of the system’s thermal 2 - OK,
environment. 3 - degraded,
4 - falied
Collector: _HLTHCondColl
CPQHPLUGCHASSIS Application Class
hplugslot_coll Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQHPLUGSLOT application class.
CPQHPLUGSLOT Application Class
cpqSiHotPlugBoardPresent Y con undef undef undef set by coll none 1 - other,
2 - present,
Monitors the presence of the hot plug slot. 3 - absent

Collector: hplugslot_coll
cpqSiHotPlugSlotBoardCondition Y con undef 3 4 60 sec stoplight number
warn alarm 1 - other,
Monitors the condition of the hot plug slot. 2 - OK,
3 - degraded,
Recovery Actions: If the parameter enters a warning or 4 - failed
alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: hplugslot_coll

PATROL Parameter Reference Manual 159

PATROL Parameter Reference Manual 160

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 26 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqSiHotPlugSlotErrorStatus Y con undef undef undef set by coll text 1 - no error, 2 -
general error, 3 -
Monitors the status of the hot plug slot. wrong revision, 4 -
wrong board, 5 -
Collector: hplugslot_coll cannot config, 6 -
power fault, 7 -
unexpected power
loss
cpqSiHotPlugSlotPowerState Y con undef 4 undef set by coll stoplight number
alarm 1 - other,
Monitors the power state of the hot plug slot. 2 - power on,
3 - power off and no
Recovery Actions: If the parameter enters a warning or board present,
alarm state, a message is displayed in the PATROL 4 -power off
output window and an event is posted in the event log.

Collector: hplugslot_coll
CPQIDA Application Class
_IDAColl Y coll NA NA NA 13 min none NA

Collects information for the consumer parameters in the

CPQIDA application class.
_IDACondColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQIDA application class.
cpqAccelBattery Y con undef 4 5 set by coll gauge number
warn alarm 1 - other,
Monitors the status of each battery pack on the board. 2 - OK,
3 - recharging,
Recovery Actions: If the parameter enters a warning or 4 - degraded,
alarm state, a message is displayed in the PATROL 5 - failed,
output window and an event is posted in the event log. 6 - not present

Collector: _IDACondColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 27 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqAccelCondition Y con NA 3 4 set by coll gauge number
warn alarm 1 - other,
Monitors the overall condition of the SMART array 2 - OK,
accelerator. 3 - degraded,
4 - failed
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _IDACondColl
cpqAccelReadErrs Y con undef 2 3–100 set by coll graph errors
warn alarm
Indicates the rate of accelerator read errors over the
scheduling interval.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _IDACondColl
cpqAccelWriteErrs Y con undef 1 2–100 NA graph errors
warn alarm
Indicates the rate of accelerator write errors over the
scheduling interval.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _IDACondColl

PATROL Parameter Reference Manual 161

PATROL Parameter Reference Manual 162

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 28 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqCntlrCondition Y con NA 3 4 set by coll gauge number
warn alarm 1 - other,
Monitors the overall condition of the SMART array 2 - OK,
controller and any associated logical drives, physical 3 - degraded,
drives, and array accelerators. 4 - failed

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _IDACondColl
cpqSpareCondition Y con undef 3 4 set by coll gauge number
warn alarm 1 - other,
Provides information about the overall condition of this 2 - OK,
spare. 3 - degraded,
4 - failed
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _IDACondColl
CPQIDALOGDRV Application Class
cpqLogDrvCondition Y con undef 3 4 set by coll gauge number
warn alarm 1 - other,
Monitors the overall condition of the logical drive and 2 - OK,
any associated physical drives. 3 - degraded,
4 - failed
Recovery Actions: If the parameter enters a warning or
alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _IDACondColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 29 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
CPQIDAPHYDRV Application Class
cpqPhyDrvCondition Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors the overall condition of the physical drive. 2 - OK,
3 - degraded,
Recovery Actions: If the parameter enters a warning or 4 - failed
alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _IDACondColl
cpqPhyDrvFunctTest1 N con undef 0–80 undef set by coll gauge percent
warn
Provides information about a series of tests that indicate
how well a physical drive works. These tests compare the
current operation of the physical drive and the operation
of the drive when it was new.

Recovery Actions: If the parameter enters a warning or

alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _IDACondColl
cpqPhyDrvFunctTest2 N con undef 0–80 undef set by coll gauge percent
warn
Provides information about a series of tests that indicate
how well a physical drive works. These tests compare the
current operation of the physical drive and the operation
of the drive when it was new.

Recovery Actions: If the parameter enters a warning or

alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _IDACondColl

PATROL Parameter Reference Manual 163

PATROL Parameter Reference Manual 164

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 30 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqPhyDrvFunctTest3 N con undef 0–80 undef set by coll gauge percent
warn
Provides information about a series of tests that indicate
how well a physical drive works. These tests compare the
current operation of the physical drive and the operation
of the drive when it was new.

Recovery Actions: If the parameter enters a warning or

alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _IDACondColl
cpqPhyDrvHSeeks Y con undef undef undef set by coll graph seek operations

Provides the total number of seek operations over the

scheduling interval.

Collector: _IDACondColl
cpqPhyDrvHardReadErrs Y con undef undef undef set by coll graph errors

Monitors the rate of physical hard drive read errors over

the scheduling interval.

Recovery Actions: If the parameter enters a warning or

alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _IDACondColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 31 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqPhyDrvHardWriteErrs Y con undef undef undef set by coll graph errors

Monitors the rate of physical hard drive write errors over

the scheduling interval.

Recovery Actions: If the parameter enters a warning or

alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _IDACondColl
cpqPhyDrvSeekErrs Y con undef undef undef set by coll graph errors

Provides the total number of times that the physical disk

drive detected a seek error over the scheduling interval.

Recovery Actions: If the parameter enters a warning or

alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _IDACondColl
cpqPhyDrvSeeks Y con undef undef undef set by coll graph seek operations

Provides the total number of seek operations over the

scheduling interval.

Collector: _IDACondColl
CPQNET Application Class
_NetCondColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQNET application class.
_NetSumColl Y coll NA NA NA 13 min none NA

Collects information for the consumer parameters in the

CPQNET application class.

PATROL Parameter Reference Manual 165

PATROL Parameter Reference Manual 166

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 32 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqifCondition Y con 1–4 3 4 set by coll stoplight 1 - other,
warn if out of warn alarm 2 - OK,
Displays condition of the network interface. range 3 - warn,
4 - failed
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _NetCondColl
cpqifInErrors N con undef undef undef set by coll graph errors

Monitors the number of errors over the scheduling

interval.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _NetSumColl
cpqifInNUcastPkts N con undef undef undef set by coll graph packets

Monitors the number of non-unicast (subnetwork-

broadcast or subnetwork-multicast) packets delivered to
a higher layer protocol.

Collector: _NetSumColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 33 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqifOutErrors N con undef undef undef set by coll graph errors

Monitors the number of errors over the scheduling

interval.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _NetSumColl
cpqifOutNUcastPkts N con undef undef undef set by coll graph packets

Monitors the number of packets that higher level

protocols requested be transmitted to a non-unicast
(subnetwork-broadcast or subnetwork-multicast)
address, including those that were discarded or not sent.

Collector: _NetSumColl
cpqifStatus Y con 1–5 3 4 set by coll stoplight 1 - other,
warn if out of warn alarm 2 - OK,
Displays status of the network interface. range 3, 4 - warn,
5 - failed
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _NetCondColl
CPQNIC Application Class
_NicCondColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQNIC application class.

PATROL Parameter Reference Manual 167

PATROL Parameter Reference Manual 168

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 34 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
_NicSummColl Y coll NA NA NA 13 min none NA

Collects information for the consumer parameters in the

CPQNIC application class.
cpqNicCond Y con 1–4 3 4 set by coll stoplight 1 - other,
OK if out of warn alarm 2 - OK,
Displays condition of the Network Interface Card (NIC). range 3 - degraded,
4 - failed
Recovery Actions:If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _NicCondColl
cpqNicStatus Y con 1–4 3 4 set by coll stoplight 1 - unknown,
warn if out of alarm warn 2 - OK,
Displays status of the Network Interface Card (NIC). range 3 - gen. failure,
4 - link failure
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _NicCondColl
cpqNicSummary N con undef undef undef set by coll text NA

Contains port, role, slot, and state for the Network

Interface Card (NIC).

Collector: _NicSummColl
CPQPWRSUP Application Class
_cpqFltTolPwrSupColl Y coll NA NA NA 3 min none NA

Collects information for the consumer parameters in the

CPQPWRSUP application class.
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 35 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqPwrSupSysCond Y con undef 3 4 set by coll stoplight 1 - other,
warn alarm 2 - OK,
Displays overall condition of the power supply sub- 3 - degraded,
system as reported by Compaq Insight Manager. 4 - failed

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _cpqFltTolPwrSupColl
CPQPWRSUPENTRY Application Class
cpqPwrSupEntryCond Y con undef 3 4 set by coll stoplight 1- other,
warn alarm 2 - OK,
Indicates the reported condition of the power supply. 3 - degraded,
4 - failed
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _cpqFltTolPwrSupColl
cpqPwrSupEntrySummary N con undef undef undef set by coll text NA

Reports summary information for the power supply.

Information included in the summary includes the
current status, voltage, used capacity, max capacity,
whether or not the supply is redundant, model, and serial
number.

Collector: _cpqFltTolPwrSupColl
CPQSCSI Application Class
_ScsiCondColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQSCSI application class.

PATROL Parameter Reference Manual 169

PATROL Parameter Reference Manual 170

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 36 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
_ScsiSumColl Y coll NA NA NA 11 min none NA

Collects information for the consumer parameters in the

CPQSCSI application class.
CPQSCSICNTLR Application Class
cpqCntlrCondition Y con undef 3 4 set by coll gauge number
warn alarm
Monitors the overall condition of the SCSI controller and
any associated logical drives and physical drives
controlled by it.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _ScsiCondColl
CPQSCSIPHYDRV Application Class
cpqPhyDrvCondition Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors the overall condition of the SCSI physical drive. 2 - OK,
3 - degraded,
Recovery Actions: If the parameter enters a warning or 4 - failed
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _ScsiCondColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 37 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqPhyDrvHardReadErrs Y con 0–100 1 2–100 set by coll graph errors
alarm out of warn alarm
Monitors the rate of physical hard drive read errors over range
the scheduling interval.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _ScsiSumColl
cpqPhyDrvHardWriteErrs Y con 0–100 1 2–100 set by coll graph errors
alarm out of warn alarm
Monitors the rate of physical hard drive write errors over range
the scheduling interval.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _ScsiSumColl
cpqPhyDrvSum N con undef undef undef set by coll text NA

Provides summary of physical drive information.

Collector: _ScsiSumColl

PATROL Parameter Reference Manual 171

PATROL Parameter Reference Manual 172

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 38 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
CPQSCSITAPE Application Class
cpqTapeCountersTotalErrs N con undef undef undef set by coll graph errors

Monitors the rate of tape drive errors over the scheduling

interval.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _ScsiSumColl
cpqTapeCountersTotalUnc N con undef undef undef set by coll graph errors

Monitors the rate of uncorrectable tape drive errors over

the scheduling interval.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _ScsiSumColl
cpqTapeDrvCondition Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors the status of the physical tape drive. 2 - OK,
3 - degraded,
Recovery Actions: If the parameter enters a warning or 4 - failed
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _ScsiCondColl
CPQSCST Application Class
_SCSTColl Y coll NA NA NA 11 min none NA

Collects information for the consumer parameters in the

CPQSCST application class.
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 39 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqBoxCondition Y con undef 3 4 set by coll stoplight 1 - other,
warn alarm 2 - OK,
Provides the SCSI drive box condition. 3 - degraded,
4 - failed
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _SCSTColl
cpqFanStatus Y con undef 3 5 set by coll stoplight number
alarm warn 1 - other,
Monitors the status of the Compaq Drive Box Fan. 2 - OK,
3 - failed,
Recovery Actions: If the parameter enters a warning or 4 - no fan present,
alarm state, a message is displayed in the PATROL 5 - degraded
output window and an event is posted in the event log.

Collector: _SCSTColl
cpqSidePanelStatus Y con undef 3 undef set by coll stoplight number
warn 1 - other,
Monitors the status of the Compaq Drive Box Side Panel. 2 - OK,
3 - failed,
Recovery actions: If the parameter enters a warning or 4 - not supported
alarm state, a message appears in the PATROL output
window and an event appears in the event log.

Collector: _SCSTColl

PATROL Parameter Reference Manual 173

PATROL Parameter Reference Manual 174

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 40 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqTempStatus Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors the temperature of the drive system. 2 - OK,
3 - degraded,
Recovery Actions: If the parameter enters a warning or 4 - failed,
alarm state, a message is displayed in the PATROL 5 - not supported
output window and an event is posted in the event

Collector: _SCSTColl
CPQSM2 Application Class
_SM2CondColl Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQSM2 application class.
_SM2SUMColl Y coll NA NA NA 11 min none NA

Collects information for the consumer parameters in the

CPQSM2 application class.
cpqSm2BatteryPercentCharged Y con undef 0–20 20–50 set by coll gauge percent
alarm warn
Monitors the charge percent of the Remote Insight
battery.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _SM2CondColl
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 41 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqSm2CntlrBatteryStatus Y con undef 3 4 set by coll stoplight number
alarm warn 1 - other,
Monitors the status of the Remote Insight battery. 2 - OK,
3 - failed,
Recovery Actions: If the parameter enters a warning or 4 - degraded
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _SM2CondColl
cpqSm2CntlrInterfaceStatus Y con undef 3 undef set by coll stoplight number
alarm 1 - other,
Monitors the overall status of the interface between the 2 - OK,
Remote Insight board and the host server. 3 - failed,
4 - degraded
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _SM2CondColl
cpqSm2CntlrKeyboardCableStatus Y con 3 undef undef set by coll stoplight number
alarm 1 - other,
Monitors the overall status of the keyboard interface on 2 - connected,
the Remote Insight Board. 3 - disconnected

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _SM2CondColl
cpqSm2NicCond Y con undef 3 4 set by coll stoplight number
warn alarm 1 - other,
Monitors the condition of the Remote Insight Board 2 - OK,
network interface card. 3 - failed,
4 - degraded
Collector: _SM2CondColl

PATROL Parameter Reference Manual 175

PATROL Parameter Reference Manual 176

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 42 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqSm2NicSumm N con undef undef undef set by coll text NA

Provides a summary of Remote Insight Board network

interface card information.

Collector: _cpqSm2_coll
cpqSm2Summ Y con undef undef undef set by coll text NA

Monitors summary information for the remote insight

board, including ROM date, ROM version, Video Status,
Battery enabled alert status, board CIM agent location,
cold reboot setting, serial number, session status, system
ID, IP address, model, mouse cable status, internal and
external power cable status.

Collector: _cpqSm2_coll
CPQTEMPSENSOR Application Class
_CPQTEMPSENSCONDCOLL Y coll NA NA NA 60 sec none NA

Collects information for the consumer parameters in the

CPQTEMPSENSOR application class.
_CPQTEMPSENSORCOLL Y coll NA NA NA 11 min none NA

Collects information for the consumer parameters in the

CPQTEMPSENSOR application class.
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 43 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
CPQTEMPSENSORENTRY Application Class
cpqTempSensorActual Y con undef see Parameter see Parameter set by coll graph degrees Celsius
description for description for
Displays current temperature, in degrees Celsius, details details
reported by this sensor.

If no Border, Alarm1, or Alarm2 ranges are set for this

parameter the actual value is compared to the max
temperature value maintained by Compaq Insight
Manager. If the actual value exceeds the max temperature
value the parameter is set to the ALARM status. If the
user sets the Border, Alarm1, or Alarm2 ranges those
values are used to determine parameter status.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _CPQTEMPSENSCONDCOLL
cpqTempSensorSummary N con undef undef undef set by coll text NA

Contains summary information for this sensor.

Collector: _CPQTEMPSENSORCOLL
CPQUPS Application Class
_UPSColl Y coll NA NA NA 11 min none NA

Collects information for the consumer parameters in the

CPQUPS application class.

PATROL Parameter Reference Manual 177

PATROL Parameter Reference Manual 178

Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 44 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqAutoShutdownDelay Y con undef undef undef set by coll gauge minutes

Provides the number of minutes of battery power

remaining before the UPS driver begins a graceful
shutdown of the operating system.

Collector: _UPSColl
cpqEstimatedBatteryLife Y con undef undef undef set by coll gauge minutes

Provides estimated number of minutes of battery power

available. A UPS may not provide the estimated battery
life when AC power is available. The parameter value
will be negative one (-1) when the PATROL Agent is
unable to determine the estimated battery life.

Collector: _UPSColl
cpqLinestatus Y con undef 4 undef set by coll gauge number
alarm 1 - other,
Provides the status of the AC line input to the UPS. 2 - OK,
4 - failed
Recovery Actions: If the parameter enters a warning or
alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _UPSColl
CPQUTIL Application Class
_UTILIZATIONColl Y coll NA NA NA 7 min none NA

Collects information for the consumer parameters in the

CPQUTIL application class.
Table 7 PATROL for Compaq Insight Manager 1.5.04 (Part 45 of 45)

Listed Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type

or
Parameter
cpqSysUtilEISABusFiveMin Y con undef 80–90 90–100 set by coll graph percent
warn alarm
Provides the EISA bus utilization as a percent of the
theoretical maximum during the last five minutes.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _UTILIZATIONColl
cpqSysUtilEISABusHour Y con undef 80–90 90–100 set by coll graph percent
warn alarm
Provides the EISA bus utilization as a percent of the
theoretical maximum during the last hour.

Recovery Actions: If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _UTILIZATIONColl
cpqSysUtilEISABusThirtyMin Y con undef 80–90 90–100 set by coll graph percent
warn alarm
Provides the EISA bus utilization as a percent of the
theoretical maximum during the last 30 minutes.

Recovery Actions:If the parameter enters a warning or

alarm state, a message is displayed in the PATROL
output window and an event is posted in the event log.

Collector: _UTILIZATIONColl

PATROL Parameter Reference Manual 179

PATROL Parameter Reference Manual 180
PATROL for Compaq NonStop Himalaya Servers 1.2.08

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 1 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NSK_ASYNC Application Class
Errors Y con undef undef undef set by coll graph errors per sec

Reports the number of Asynchronous communication

line errors occurring each second.

Collector: HOSTlineAsyncColl
InRate Y con undef undef undef set by coll graph messages per sec

Reports the number of incoming messages per second for

all device sizes.

Collector: HOSTlineAsyncColl
LineState Y con 0–1 0–0 undef set by coll graph 0 - Down,
alarm when out alarm 1 - Up
Indicates whether the ASYNC line is available. of range

Collector: HOSTlineAsyncColl
OutRate Y con undef undef undef set by coll graph messages per sec

Reports the number of incoming messages per second for

all device sizes.

Collector: HOSTlineAsyncColl

PATROL Parameter Reference Manual 181

PATROL Parameter Reference Manual 182

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 2 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NSK_BUSY Application Class
ListBusyDisks Y con undef undef undef set by coll text disks

Lists the busy disks on the system. The value is derived

from a TCM connection.

Collector: HOSTbusyDiskColl
ListBusyProcesses Y con undef undef undef set by coll text processes

Lists all the busy Tandem NSK processes on the system.

The value is derived from a TCM connection.

Collector: HOSTbusyProcColl
NSK_CHANNEL Application Class
ChannelActive Y con 0–1 0–0 1–1 set by coll graph 1 - Active,
(inactive by (inactive by 0 - Inactive
Indicates whether a channel is active. default) default)

This parameter is set during the execution of all collectors

that use channels for communication (i.e. RCF or TCM
collectors).
NSK_CP6100 Application Class
Errors Y con undef undef undef set by coll graph errors per sec

Reports the number of CP6100 communication line errors

occurring each second.

Collector: HOSTlineCP6100Coll
LineState Y con 0–1 0–0 undef set by coll graph 0 - Down,
alarm when out alarm 1 - Up
Indicates whether the CP6100 line is available. of range

Collector: HOSTlineCP6100Coll
Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 3 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ReceiveRate Y con undef undef undef set by coll graph bytes per sec

Reports the volume of incoming data per second.

Collector: HOSTlineCP6100Coll
Retries Y con undef undef undef set by coll graph number of retries

Reports the total number of data retransmission attempts

if the line is down.

Collector: HOSTlineCP6100Coll
SendRate Y con undef undef undef set by coll graph bytes per sec

Reports the volume ofoutgoing data per second.

Collector: HOSTlineCP6100Coll
NSK_CPU Application Class
AverageQueueLength Y con undef 5–10 10–100 set by coll graph none
warn alarm
Displays the average CPU queue length, which is
calculated as change in queue length over the collection
interval. The value is derived from an RCF connection.

Collector: HOSTcpuColl
CPUBusy Y con 0–100 70–90 90–100 set by coll graph percentage of time
alarm when out warn alarm busy
Displays the percentage of time that the processor is busy of range
over the collection interval.
When an alarm threshold is exceeded, the data point on
the CPUBusy chart will be annotated with the
ListBusyProcesses parameter details from the NSK_BUSY
application class.The value is derived from an RCF
connection.

Collector: HOSTcpuColl

PATROL Parameter Reference Manual 183

PATROL Parameter Reference Manual 184

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 4 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
CPUstate Y con 0–1 0–0 undef set by coll stoplight 0 - unavailable,
alarm when out warn 1 - available
Indicates whether the CPU is available. The value is of range
derived from an RCF connection.

Collector: HOSTcpuColl
DispatchRate Y con undef undef undef set by coll graph dispatches per sec

Displays the rate that processes are selected from the

Ready list and executed. The value is derived from an
RCF connection.

Collector: HOSTcpuColl
FreeLowPinPCBs Y con 0–254 0–35 35–50 set by coll gauge number of process
alarm when out alarm warn control blocks
Displays the number of available low-pin process control of range
blocks. The value is derived from an RCF connection.

Collector: HOSTcpuColl
FreePCBs Y con undef 0–35 35–50 set by coll gauge number of process
alarm warn control blocks
Displays the number of available process control blocks.
The value is derived from an RCF connection.

Collector: HOSTcpuColl
FreeTLEs Y con undef 0–100 100–300 set by coll gauge number of time list
alarm warn elements
Displays the number of unused time list elements. The
value is derived from an RCF connection.

Collector: HOSTcpuColl
Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 5 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
MemoryFreePages Y con undef 0–200 200–1000 set by coll gauge number of memory
alarm warn pages
Displays the number of memory pages available. The
value is derived from an RCF connection.

Collector: HOSTcpuColl
MemoryPageSwapRate Y con undef 5–10 10–100 set by coll graph pages swapped per
warn alarm sec
Reports the memory swap rate per second. The value is
derived from an RCF connection.

Collector: HOSTcpuColl
NSK_DISK Application Class
DiskRate Y con undef undef undef set by coll graph number of reads and
writes per sec
Displays the rate of reads and writes that are performed
by the disk process per second. The value is derived from
a TCM connection.

Collector: HOSTdiskColl
DiskState Y con undef undef undef set by coll stoplight 1 - Up,
2–8 - Other
Indicates the accessibility of the disk. The value is derived (annotated),
from an RCF connection. 9 - Hard down,
10 - Down
Collector: HOSTdiskColl
FreeExtents Y con undef undef undef set by coll graph number of pages

Reports the number of pages of available extents on the

disk. The value is derived from an RCF connection.

Collector: HOSTdiskColl

PATROL Parameter Reference Manual 185

PATROL Parameter Reference Manual 186

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 6 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
IORequests Y con undef undef undef set by coll graph requests per sec

Displays the number of input and output requests

received per second by the disk process. This parameter
does not take into consideration whether the requests
resulted in a successful read or write. The value is
derived from a TCM connection.

Collector: HOSTdiskColl
LargestAvailableExtent Y con undef undef undef set by coll graph MB

Reports the largest free contiguous extent on the disk.

The value is derived from an RCF connection.

Collector: HOSTdiskColl
PercentBusy Y con 0–100 60–80 80–100 set by coll graph percentage of time
alarm when out warn alarm the disk is busy
Displays the percentage of time that the disk is busy. The of range
value is derived from a TCM connection.

Collector: HOSTdiskColl
PercentFree Y con 0–100 0–10 10–20 set by coll graph percentage of
alarm when out alarm warn available disk space
Displays the percentage of disk space that is available. of range
The value is derived from an RCF connection.

Collector: HOSTdiskColl
PercentFull Y con 0–100 80–90 90–100 set by coll graph percentage of disk
alarm when out warn alarm space used
Displays the percentage of disk space that is used. The of range
value is derived from an RCF connection.

Collector: HOSTdiskColl
Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 7 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ReadBusy Y con undef undef undef set by coll graph percentage of time
the disk process
Displays the percentage of time that the disk process spent reading
spent reading. The value is derived from a TCM
connection.

Collector: HOSTdiskColl
WriteBusy Y con undef undef undef set by coll graph percentage of time
the disk process
Displays the percentage of time that the disk process spent writing
spent writing. The value is derived from a TCM
connection.

Collector: HOSTdiskColl
NSK_EMS Application Class
RecoveryStatus Y con 0–2 1–1 2–2 set by coll gauge 0 - Recovery
alarm when out alarm (launches successful,
Starts the recovery script and displays the status of an of range EMSEventReco 1 - Recovery
EMS recovery action. Recovery action scripts are tied to very recovery required,
the warning value of 1. After the action runs, the status action) 2 - Recovery failed
value will either become 0 if the action is successful or
become 2 if it fails and enters an alarm state.

Collector: HOSTemsColl
EventDetails Y con NA NA NA set by coll text NA

Displays details for each recovery event. These stored

details are used by the script to execute EMS recovery
actions.

Collector: HOSTemsColl

PATROL Parameter Reference Manual 187

PATROL Parameter Reference Manual 188

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 8 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
RecovExecOutput Y con NA NA NA set by coll text NA

Displays the output of an EMS event recovery action.

Collector: HOSTemsColl
NSK_ENVOY Application Class
Errors Y con undef undef undef set by coll graph errors per sec

Reports the number of Envoy communication line errors

occurring each second.

Collector: HOSTlineEnvoyColl
LineState Y con 0–1 0–0 undef set by coll graph 0 - Down,
alarm when out alarm 1 - Up
Indicates whether the Envoy line is available. of range

Collector: HOSTlineEnvoyColl
ReceiveRate Y con undef undef undef set by coll graph bytes per sec

Reports the volume of incoming data per second.

Collector: HOSTlineEnvoyColl
Retries Y con undef undef undef set by coll graph number of retries

Reports the total number of the number of data

retransmission attempts if the line is down.

Collector: HOSTlineEnvoyColl
SendRate Y con undef undef undef set by coll graph bytes per sec

Reports the volume ofoutgoing data per second.

Collector: HOSTlineEnvoyColl
Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 9 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NSK_EXPAND Application Class
Errors Y con undef undef undef set by coll graph errors per sec

Reports the number of Expand communication line errors

occurring each second.

Collector: HOSTlineExpandColl
FramesDropped Y con undef undef undef set by coll graph frames per sec

Reports the number of frames dropped per second.

Collector: HOSTlineExpandColl
LineState Y con 0–1 0–0 undef set by coll graph 0 - Down,
alarm when out alarm 1 - Up
Indicates whether the Envoy line is available. of range

Collector: HOSTlineExpandColl
ReceiveDataRate Y con undef undef undef set by coll graph bytes per sec

Reports the volume of incoming data per second.

Collector: HOSTlineExpandColl
ReceiveFrameRate Y con undef undef undef set by coll graph frames per sec

Reports the number of incoming frames per second.

Collector: HOSTlineExpandColl
SendDataRate Y con undef undef undef set by coll graph bytes per sec

Reports the volume ofoutgoing data per second.

Collector: HOSTlineExpandColl

PATROL Parameter Reference Manual 189

PATROL Parameter Reference Manual 190

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 10 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
SendFrameRate Y con undef undef undef set by coll graph frames per sec

Reports the number ofoutgoing frames per second.

Collector: HOSTlineExpandColl
NSK_FILE Application Class
AvailableFileExtents Y con 0–1000 0–1 1–3 set by coll graph number of extents
OK when out of alarm warn
Reports the number of unallocated file extents. The value range
is derived from an RCF connection.

Collector: HOSTfileColl
BrokenState Y con 0–1 1–1 undef set by coll stoplight 0 - Not broken,
alarm when out alarm 1 - Broken
Indicates that the file has the broken attribute. The value of range
is derived from an RCF connection.

Collector: HOSTfileColl
CorruptState Y con 0–1 1–1 undef set by coll stoplight 0 - Not corrupt,
alarm when out alarm 1 - Corrupt
Indicates that the file has the corrupt attribute. The value of range
is derived from an RCF connection.

Collector: HOSTfileColl
CrashopenState Y con 0–1 1–1 undef set by coll stoplight 0 - Not crashed while
alarm when out alarm open,
Indicates that the file has crashed while it was open. The of range 1 - Crashed while
value is derived from an RCF connection. open

Collector: HOSTfileColl
Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 11 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
FileToDiskExtentSizeRatio Y con 0–100 80–90 90–100 set by coll graph ratio of file’s
alarm when out warn alarm secondary extent size
Displays the ratio of the file’s secondary extent size to the of range to largest disk
largest disk fragment. The value is derived from an RCF fragment
connection.

Collector: HOSTfileColl
GrowthRateKb Y con undef undef undef set by coll graph KB

Reports the change in file size since the last time data was
collected. If the file size has been reduced, the number
will be negative. If the file size is larger, the number will
be positive. The value is derived from an RCF connection.

Collector: HOSTfileGrowthColl
GrowthRatePercent Y con undef undef undef set by coll graph percentage of file size
change
Displays the percentage of file size change since the last
time data was collected. If the file size has been reduced,
the percent will be less than 0. If the file size is larger, the
percent will be greater than 0. The value is derived from
an RCF connection.

Collector: HOSTfileGrowthColl
PercentFull Y con 0–100 80–90 90–100 set by coll graph percentage of file that
OK when out of warn alarm is full
Displays the percentage of the file that is full. The value is range
derived from an RCF connection.

Collector: HOSTfileColl

PATROL Parameter Reference Manual 191

PATROL Parameter Reference Manual 192

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 12 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
RollforwardState Y con 0–1 1–1 undef set by coll stoplight 0 - Not rolled
alarm when out alarm forward,
Indicates that the file has been rolled forward since the of range 1 - Rolled forward
last time data was collected. The value is derived from an
RCF connection.

Collector: HOSTfileColl
NSK_FILE_GROUP Application Class
There are no parameters associated with the
NSK_FILE_GROUP application. All monitoring occurs in
the background.
NSK_HOST Application Class
HOSTbusyDiskColl Y coll NA NA NA 215 sec None NA

Gathers data and updates the ListBusyDisks consumer

parameter for the NSK_BUSY application.
HOSTbusyProcColl Y coll NA NA NA 20 sec None NA

Gathers data and updates the ListBusyProcesses

consumer parameter for the NSK_BUSY application.
HOSTchanColl Y coll NA NA NA 85 sec None NA

Monitors all channels. Blocked channels that do not

respond within 3 invocations of the script will be closed
and restarted. Channels with no matching instances will
have instances created for them. Channel instances with
no matching channels will have channels created for
them.
Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 13 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
HostConnectionState Y coll 0–2 0–0 1–1 none stoplight 0 - Down,
alarm when out alarm warn 1 - Connecting,
Collector: Displays the state of the RCF connection to the of range 2 - Connected
host. The state is updated each time RCF data collection
occurs. Also, a separate collection script periodically
issues a heartbeat or echo request to check that the host
is accessible and then updates the HostConnectionState
parameter.
HOSTcpuColl Y coll NA NA NA 1 min None NA

Gathers data and updates the consumer parameters for

the instances in the NSK_CPU application.
HOSTdiskColl Y coll NA NA NA 175 sec None NA

Gathers data and updates the consumer parameters for

the instances in the NSK_DISK application.
HOSTemsColl Y coll NA NA NA 20 sec None NA

Collects EMS events selected using rules and creates

matching PATROL events. These events are then
displayed in the Event Manager window. This parameter
also creates NSK_EMS recovery instances for received
EMS events that match a recovery rule and then updates
NSK_EMS consumer parameters for those instances. The
update will trigger the recovery action for the NSK_EMS
instance.
HOSTfileColl Y coll NA NA NA 132 sec None NA

Gathers data and updates the consumer parameters for

specific instances in the NSK_FILE application. It
destroys any instance added by the HOSTfileGroupColl
that no longer exceeds the threshold.

PATROL Parameter Reference Manual 193

PATROL Parameter Reference Manual 194

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 14 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
HOSTfileGroupColl Y coll NA NA NA 70 min None NA

Checks each file Group for any file that exceeds a

threshold. The thresholds are: Percentful,
ExtentsAvailable, ExtentSizeRatio, and File state. All files
that exceed these thresholds are added to the NSK_FILE
application and monitored individually.
HOSTfileGrowthColl Y coll NA NA NA 12 hrs None NA

Collects the current file size of selected files and updates

GrowthRatePercent and GrowthRate KB in the
NSK_FILE application.
HOSTheartBeatColl Y coll NA NA NA 20 sec None NA

Periodically issues a heartbeat or echo request to check

that the host is accessible and then updates the
HostConnectionState parameter.
HOSTipColl Y coll NA NA NA 98 sec None NA

Collects data and updates the consumer parameters for

the IP communication line instances in the NSK_TCPIP
KM under the NSK_COMM group.
HOSTlineAsyncColl Y coll NA NA NA 85 sec None NA

Collects data and updates the consumer parameters for

the Async communication line instances in the
NSK_ASYNC KM under the NSK_COMM group.
HOSTlineCP6100Coll Y coll NA NA NA 101 sec None NA

Collects data and updates the consumer parameters for

the CP6100 communication line instances in the
NSK_CP6100 KM under the NSK_COMM group.
Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 15 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
HOSTlineEnvoyColl Y coll NA NA NA 94 sec None NA

Collects data and updates the consumer parameters for

the Envoy communication line instances in the
NSK_ENVOY KM under the NSK_COMM group.
HOSTlineExpandColl Y coll NA NA NA 71 sec None NA

Collects data and updates the consumer parameters for

the Expand communication line instances in the
NSK_EXPAND KM under the NSK_COMM group.
HOSTlineX25Coll Y coll NA NA NA 101 sec None NA

Collects data and updates the consumer parameters for

the X25 communication line instances in the NSK_X25
KM under the NSK_COMM group.
HOSTprocBadStateColl Y coll NA NA NA 45 sec None NA

Gathers data for all processes that are looping,

suspended, or in debug. Each instance is added to the
NSK_PROCESS application.
HOSTprocColl Y coll NA NA NA 130 sec None NA

Gathers data and updates the consumer parameters for

specific instances in the NSK_PROCESS application. It
destroys any instance added by the HOSTbusyProcColl,
HOSTprocGroupColl, and HOSTprocBadStateColl that
no longer exceed a threshold.
HOSTprocGroupColl Y coll NA NA NA 195 sec None NA

Gathers data and updates the consumer parameters for

the NSK_PROCESS_GROUP application.

PATROL Parameter Reference Manual 195

PATROL Parameter Reference Manual 196

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 16 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
HOSTrestartRequired Y con 0–1 1–1 undef None none NA
OK when out of alarm
Runs a recovery action to collect the majority of the range
monitored NonStop HImalaya host data after the
PATROL Agent initializes its memory for the NonStop
KMs (if, for example, the Agent is stopped). The
NSK_HOST application discovery script sets the value of
this consumer parameter to start the recovery action.
HOSTspoolerColl Y coll NA NA NA 2 min None NA

Gathers data and updates the consumer parameters for

the instances in the NSK_SPOOLER application.
HOSTtcpColl Y coll NA NA NA 108 sec None NA

Gathers data and updates the consumer parameters for

the TCP communication line instances in the NSK_TCPIP
KM under the NSK_COMM group.
HOSTtmfAuditColl Y coll NA NA NA 2 min None NA

Gathers data and updates the AudittrailPercentFull,

HungTransaction, and RolloverRequired consumer
parameters in the NSK_TMF application.
HOSTtmfColl Y coll NA NA NA 30 sec None NA

Gathers data and updates the consumer parameters for

the NSK_TMF application.
HOSTudpColl Y coll NA NA NA 2 min None NA

Gathers data and updates the consumer parameters for

the UDP communication line instances in the NSK_TCPIP
KM under the NSK_COMM group.
Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 17 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NSK_PROCESS Application Class
PercentBusy Y con 0–100 50–70 70–100 set by coll graph percentage of time
OK when out of warn alarm the process is busy
Displays the percentage of time that the process is busy. range
The value is derived from an RCF connection.

Collector: HOSTprocColl
ProcessDesc Y con undef undef undef set by coll text NA

Displays the description of the process. The description

contains the Process Identifier (PID), the Priority,
Memory usage, Owner, Wait State, Hometerm, Object,
Process Time, and Create Time. The value is derived from
an RCF connection.

Collector: HOSTprocColl
ProcessState Y con 1–5 2–5 undef set by coll stoplight 1 - Active,
alarm when out warn 2 - Looping,
Indicates the current state of a process in the process of range 3 - Debug,
group. The value is derived from an RCF connection. 4 - Suspended,
5 - Absent
Collector: HOSTprocColl
SwapRate Y con undef 5–10 10–100 set by coll graph memory swap faults
warn alarm per sec
Displays the memory swap faults per second for the
process. The value is derived from an RCF connection.

Collector: HOSTprocColll

PATROL Parameter Reference Manual 197

PATROL Parameter Reference Manual 198

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 18 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NSK_PROCESS_GROUP Application Class
AcceptableVolatility Y con undef 0–0 undef set by coll bool 1 - Acceptable
alarm volatility,
Indicates whether the current volatility of the number of 2 - Unacceptable
processes being monitored is at an acceptable level. A volatility
checkmark means okay; an X means not okay. (The
current process count is measured against the number of
processes when the group was first added. The difference
is then compared to the Count Volatility number to
determine whether the volatility is acceptable.) The value
is derived from an RCF connection.

Collector: HOSTprocGroupColl
CPUUtilizationSummary Y con undef undef undef set by coll text NA

Displays the utilization of each CPU within the process

group. The value is derived from an RCF connection.

Collector: HOSTprocGroupColl
CurrentProcessCount Y con undef 0–0 undef set by coll graph number of processes
alarm
Reports the number of processes in the process group.
The value is derived from an RCF connection.

Collector: HOSTprocGroupColl
MaxProcessCount Y con undef undef undef set by coll graph number of processes

Reports the largest number of processes that have

occurred in the process group. The value is derived from
an RCF connection.

Collector: HOSTprocGroupColl
Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 19 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ProcessCountVolatility Y con undef undef undef set by coll graph number of processes

Reports the change in the number of processes in the

process group. The value is derived from an RCF
connection.

Collector: HOSTprocGroupColl
ProcessDetail Y con undef undef undef set by coll text NA

Displays memory consumption, object name, and owner

for each process in the group.

Collector: HOSTprocGroupColl
SystemCPUUtilization Y con 0–100 25–50 50–100 set by coll graph percentage of system
OK when out of OK OK CPUs used by the
Displays the percentage of the system CPUs that the range process group
process group is using. The value is derived from an RCF
connection.

Collector: HOSTprocGroupColl
NSK_SPOOLER Application Class
CollectorState Y con 1–5 2–5 undef set by coll stoplight 1 - Up,
alarm when out alarm 2 - Unknown,
Indicates whether the collector is currently collecting of range 3 - Drained,
data. The value is derived from an RCF connection. 4 - Dormant,
5 - Error
Collector: HOSTspoolerColl
PercentFull Y con 0100 85–90 90–100 set by coll gauge percentage of spooler
warn alarm collector that is used
Displays the percentage of the spooler collector that is
used. The value is derived from an RCF connection.

Collector: HOSTspoolerColl

PATROL Parameter Reference Manual 199

PATROL Parameter Reference Manual 200

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 20 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
TotalNumberOfJobs Y con undef undef undef set by coll graph jobs

Reports the total number of jobs in the spooler collector.

Collector: HOSTspoolerColl
NSK_TCPIP Application Class
IPPacketsBad Y con undef undef undef set by coll graph packets per sec

Reports the number of IP packet errors occurring per

second.

Collector: HOSTipColll
IPPacketsIn Y con undef undef undef set by coll graph packets per sec

Reports the number of incoming IP packets per second.

Collector: HOSTipColl
IPPacketsOut Y con undef undef undef set by coll graph packets per sec

Reports the number of outgoing IP packets per second.

Collector: HOSTipColl
TCPPacketsDropped Y con undef undef undef set by coll graph packets per sec

Reports the number of TCP connections dropped per

second.

Collector: HOSTtcpColl
TCPPacketsIn Y con undef undef undef set by coll graph packets per sec

Reports the number of incoming TCP packets per second.

Collector: HOSTtcpColl
Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 21 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
TCPPacketsOut Y con undef undef undef set by coll graph packets per sec

Reports the number of outgoing TCP packets per second.

Collector: HOSTtcpColl
TCPPacketsRetransmitted Y con undef undef undef set by coll graph packets per sec

Reports the number of TCP packets that have been

retransmitted per second.

Collector: HOSTtcpColl
UDPPacketsBad Y con undef undef undef set by coll graph packets per sec

Reports the number of UDP packet errors occurring per

second.

Collector: HOSTudpColl
UDPPacketsDropped Y con undef undef undef set by coll graph packets per sec

Reports the number of UDP connections dropped per

second.

Collector: HOSTudpColl
UDPPacketsIn Y con undef undef undef set by coll graph packets per sec

Reports the number of incoming UDP packets per

second.

Collector: HOSTudpColl
UDPPacketsOut Y con undef undef undef set by coll graph packets per sec

Reports the number of outgoing UDP packets per second.

Collector: HOSTudpColl

PATROL Parameter Reference Manual 201

PATROL Parameter Reference Manual 202

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 22 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NSK_TMF Application Class
AudittrailPercentFull Y con 0–100 85–95 95–100 set by coll graph percentage of audit
alarm when out warn alarm trail that is full
Displays the percent full for the current audit trail file. of range

Collector: HOSTtmfColl
HungTransaction Y con 0–1 1–1 undef set by coll bool 0 - No transactions
alarm when out alarm hung,
Displays whether or not a TMF transaction is hung. of range 1 - One or more
transactions hung
Collector: HOSTtmfColl
LocalTransRate Y con undef undef undef set by coll graph transactions per sec

Displays the number of local transactions generated per

second. The value is derived from a TCM connection.

Collector: HOSTtmfColl
NetworkTransRate Y con undef undef undef set by coll graph transactions per sec

Displays the number of network transactions occurring

each second. The value is derived from a TCM
connection.

Collector: HOSTtmfColl
RemoteTransRate Y con undef undef undef set by coll graph transactions per sec

Displays the number of remote transactions occurring

each second. The value is derived from a TCM
connection.

Collector: HOSTtmfColl
Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 23 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
RolloverRequired Y con 0–1 1–1 undef set by coll graph 0 - No rollover
alarm when out alarm required,
Indicates if the TMF audit trail file needs to be rolled over of rnage 1 - Rollover required
to the next audit trail file.

Collector: HOSTtmfColl
TMFstate Y con 1–5 2–5 undef set by coll stop-light 1 - Started,
alarm when out alarm 2 - Unknown,
Indicates whether the TMF has been started. The value is of range 3 - Unavailable,
derived from a TCM connection. 4 - Stopping,
5 - Stopped
Collector: HOSTtmfColl
TotalTransRate Y con undef undef undef set by coll graph transactions per sec

Displays the total number of transactions processed per

second. The value is derived from a TCM connection.

Collector: HOSTtmfColl
NSK_X25 Application Class
InvalidPackets Y con undef undef undef set by coll graph packets per sec

Reports the number of invalid X25 packets received each

second.

Collector: HOSTlineX25Coll
LineState Y con 0–1 0–0 undef set by coll graph 0 - Down,
alarm when out alarm 1 - Up
Indicates whether the X25 line is available. of range

Collector: HOSTlineX25Coll

PATROL Parameter Reference Manual 203

PATROL Parameter Reference Manual 204

Table 8 PATROL for Compaq NonStop Himalaya Servers 1.2.08 (Part 24 of 24)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
PacketReceivedRate Y con undef undef undef set by coll graph packets per sec

Reports the number of incoming X25 packets per second.

Collector: HOSTlineX25Coll
PacketSentRate Y con undef undef undef set by coll graph packets per sec

Reports the number of outgoing X25 packets per second.

Collector: HOSTlineX25Coll
PATROL for DB2 Universal Database 6.4.20

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 1 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DB2_AGENT Application Class in DB2 UDB EE
DB2EEE_AGENT_PARAM and DB2EEE_SUBAGENT Application Classes in DB2 UDB EEE
ApplCommitsAttempted N con NA NA NA set by coll graph number of SQL
COMMIT statements
Indicates the average number of SQL COMMIT
statements that have been attempted for a particular
application.

Collector: CollAgent
ApplDDLExec N con NA NA NA set by coll graph number of SQL DDL
statements
Indicates the average number of SQL Data Definition
Language (DDL) statements that have been executed for a
particular application.

Collector: CollAgent
ApplIdleTime Y con NA annotate annotate and set by coll graph min
force
(in DB2_AGENT and DB2EEE_AGENT only) application

Indicates application idling time in minutes. Requires the

STATEMENT monitor switch to be turned on.

Collector: CollAgent

PATROL Parameter Reference Manual 205

PATROL Parameter Reference Manual 206

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 2 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ApplIntDeadlockRollbacks N con NA NA NA set by coll graph number of deadlock
rollbacks
Indicates the number of rollbacks that were initiated by
the database manager because of deadlock for the
selected application.

Collector: CollAgent
ApplRollbacksAttempted N con NA NA NA set by coll graph number of SQL
ROLLBACK
Indicates the average number of SQL ROLLBACK statements attempted
statements that have been attempted for a particular
application.

Collector: CollAgent
ApplSelectsExec N con NA NA NA set by coll graph number of SQL
SELECT statements
Indicates the average number of SQL SELECT statements executed
that have been executed for a particular application.

Collector: CollAgent
ApplTotThroughput N con NA NA NA set by coll graph number of SQL
statements
Indicates the number of successful SQL statements
processed for the selected application.

Collector: CollAgent
ApplTotUOW N con NA NA NA set by coll graph number of units of
work
Indicates the number of units of work for the selected
application.

Collector: CollAgent
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 3 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ApplUpdInsDelExec N con NA NA NA set by coll graph number of SQL
UPDATE, INSERT,
Indicates the average number of SQL UPDATE, INSERT, and DELETE
and DELETE statements that have been executed for a statements
particular application.

Collector: CollAgent
AveApplSortTime N con NA NA NA set by coll graph msec

Indicates the average time required for each sort that has
been executed on behalf of the selected application.

The SORT DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollAgent
AveApplWaitForLock N con NA NA NA set by coll graph msec

Indicates the average amount of time that the selected

application waited for locks.

The LOCK DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollAgent
CpuUtilPct Y con NA NA NA set by coll graph percentage of total
CPU time used
Indicates the percentage of total CPU time used by the
database manager agent process associated with the
selected application.

Collector: CollAgent

PATROL Parameter Reference Manual 207

PATROL Parameter Reference Manual 208

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 4 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CtlgCacheHitRatio N con NA NA NA set by coll graph percentage of catalog
references
(in UDB-EEE only)

Indicates the percentage of catalog references that did not

require a catalog access.

Collector: CollAgent
CurrLockWaitTime N con NA 480–600 600–10000 set by coll graph sec
warn * alarm *
Indicates the amount of time that has passed since the
selected application began waiting on a lock.

The LOCK DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

(*No default thresholds are set for DB2EEE-SUBAGENT.)

Collector: CollAgent
DurationCurrUOW N con NA NA NA set by coll graph sec

Indicates the length of time the current unit of work

(UOW) has been running for the selected application.

The UOW DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollAgent
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 5 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DurationMostRecentUOW N con NA NA NA set by coll graph sec

Indicates the length of time it took the most recent unit of

work to complete for the selected application.

The UOW DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollAgent
NumApplDeadlocks Y con NA NA NA set by coll graph number of deadlocks

Indicates the number of deadlocks that have occurred for

the selected application.

The LOCK DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollAgent
NumApplExclLockEscals N con NA NA NA set by coll graph number of
escalations
Indicates the number of times that several row locks have
been escalated to one exclusive table lock, or the number
of times an exclusive row lock forced the table lock to
become an exclusive lock for the selected application.

Collector: CollAgent
NumApplLockEscals N con NA NA NA set by coll graph number of row lock
escalations
Indicates the number of times that several row locks have
been escalated to a table lock for the selected application.

Collector: CollAgent

PATROL Parameter Reference Manual 209

PATROL Parameter Reference Manual 210

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 6 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumApplLockTimeouts Y con NA NA NA set by coll graph number of timeouts

Indicates the number of times that a lock request on

behalf of the selected application timed out.

Collector: CollAgent
PctApplmaxlocksHeld N con NA NA NA set by coll graph percentage of
allowed locks
Indicates the percentage of allowed locks that the selected
application is holding.

Collector: CollAgent
PctApplOverflowSortReqs N con NA NA NA set by coll graph percentage of sorts

Indicates the percentage of sorts for the selected

application that ran out of sort heap and required disk
space for temporary storage purposes.

The SORT DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollAgent
PctBlkOpenLocCursors N con NA NA NA set by coll graph percentage local
blocking cursors
Indicates the percentage of local blocking cursors
currently open for a particular application.

Collector: CollAgent
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 7 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PkgCacheHitRatio N con NA NA NA set by coll graph percentage

(in DB2 UDB EEE only)

Indicates the percentage of times an application found a

section or package in the package cache without causing
it to be loaded.

Collector: CollAgent
RowsReadByAppl N con NA NA NA set by coll graph number of rows read

Indicates the average number of data rows read for the

selected application.

Collector: CollAgent
RowsWrittenByAppl N con NA NA NA set by coll graph number of rows
written
Indicates the average number of data rows that have been
written by the selected application.

Collector: CollAgent
SystemCPUTimebyAgent Y con NA NA NA set by coll graph sec

Indicates the total system CPU time used by the database

manager agent process associated with the selected
application.

Collector: CollAgent

PATROL Parameter Reference Manual 211

PATROL Parameter Reference Manual 212

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 8 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SystemCPUTimebyStmt N con NA NA NA set by coll graph sec

Indicates the total system CPU time used by the

statement currently executing.

The STATEMENT DB2 Monitor Switch must be set ON to

make this parameter active and collect data.

Collector: CollAgent
TimeBtwnRecentCommRbkPts N con NA NA NA set by coll graph sec

Indicates the total elapsed time between the most recent

COMMIT/ROLLBACK points for the selected
application.

The UOW DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollAgent
UOWLockWaitTime N con NA NA NA set by coll graph msec

Indicates the total amount of time the current unit of

work has spent waiting for locks.

The UOW DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollAgent
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 9 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UOWLogSpaceUsed N con NA NA NA set by coll graph bytes

Indicates the amount of log space the current unit of work

is using.

The UOW DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollAgent
UserCPUTimebyAgent Y con NA NA NA set by coll graph sec

Indicates the total user CPU time used by the database

manager agent process associated with the selected
application.

Collector: CollAgent
UserCPUTimebyStmt N con NA NA NA set by coll graph sec

Indicates the total user CPU time used by the current

statement for the selected application.

The STATEMENT DB2 Monitor Switch must be set ON to

make this parameter active and collect data.

Collector: CollAgent
DB2_DIAGLOG Application Class in DB2 UDB EE
DB2EEE_DIAGLOG Application Class in DB2 UDB EEE
DiagLogFSFreeSpace Y con NA NA NA set by coll graph MB

Indicates the amount of free space that is available on the

file system where the DB2 diagnostic logs reside.

Collector: CollDiaglog

PATROL Parameter Reference Manual 213

PATROL Parameter Reference Manual 214

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 10 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DiagLogFSPctUsed Y con NA NA NA set by coll graph percentage of the file
system used
Indicates the percentage of the file system used where the
DB2 diagnostic logs reside.

Collector: CollDiaglog
DiagLogOK Y con NA NA NA set by coll graph bool

Determines whether any configured keywords have been

written to the diagnostic log.

Collector: CollDiaglog
DiagLogSize Y con NA NA NA set by coll graph KB

Indicates the current size of the DB2 diagnostic log.

Collector: CollDiaglog
DiagLogTime Y con NA NA NA set by coll graph min

Indicates the number of minutes since the DB2 diagnostic

log was last updated.

Collector: CollDiaglog
DB2_DB_CMDS Application Class in DB2 UDB EE
DB2EEE_DB_CMDS Application Class in DB2 UDB EEE
CommandInfo Y con NA NA NA set by menu graph text
cmd
This is a text parameter that is used to inform the user
about an in-progress activity taking place with the
database.
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 11 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DB2_PARAM Application Class in DB2 UDB EE
DB2EEE_PARAM and DB2EEE_NODE Application Classes in DB2 UDB EEE
AgentsRegd Y con NA NA NA NA graph number of registered
agents
Indicates the number of agents the monitored instance of
the DBM currently has registered (includes coordinator
agents and subagents). This parameter, along with the
MaxagentsRegd parameter, can be used to determine the
proper setting of the MAXAGENTS configuration
parameter.

Collector: CollInstance
ARATest Y con 0–100 0–50 50–100 set by menu graph undef
warn alarm cmd
Tests the recovery action configuration. This parameter
does not monitor or measure anything on a DB2 instance.
The test automatically resets ARATest to an OK status.
ChannelFailures Y std 0–10 5–10 NA 5 min graph number of channel
alarm warn failures
Indicates the number of consecutive channel failures
through the local channel that have occurred for a
particular PATROL for DB2 channel associated with a
selected DB2 instance.

Collector: CollInstance

PATROL Parameter Reference Manual 215

PATROL Parameter Reference Manual 216

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 12 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CheckConfig Y std NA 1–2 NA 30 min bool OK/not OK
alarm
(in DB2_PARAM and DB2EEE_PARAM only)

Monitors default account user name and password

information for a DB2 instance. All parameters
monitoring the DB2 instance use the default account
information to discover and monitor DB2 resources.

Warning: If an alarm occurs because of invalid account

information, the parameters will not collect data and
PATROL for DB2 UDB will not monitor your DB2
instance.
CommittedPrivateMem Y con NA NA NA set by coll graph KB

Indicates the amount of private virtual memory currently

committed by an instance of the database manager.

Collector: CollInstance
DB2AllServersOK Y con 1–1 NA NA set by coll graph bool

(in DB2EEE_PARAM only)

Indicates whether all database managers for the instance

on all nodes are running.

Collector: CollInstance
DB2ServerOK Y con NA NA NA set by coll graph bool

(in DB2_PARAM and DB2EEE_NODE only)

Indicates the state of the DB2 main server process;

optionally notifies a user when this process is terminated.

Collector: CollInstance
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 13 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FCMBufferPoolUtil Y con NA NA NA set by coll graph percentage of buffers
being used
(in DB2 UDB EEE only)

Indicates the percentage of buffers being used by

databases to communicate internally on the node.

Collector: CollInstance
FCMConnEntryUtil Y con NA NA NA set by coll graph percentage of FCM
connection entries
(in DB2 UDB EEE only) being used

Indicates the percentage of FCM connection entries being

used at the node.

Collector: CollInstance
FCMMsgAnchorUtil Y con NA NA NA set by coll graph percentage of FCM
message anchors
(in DB2 UDB EEE only) being used

Indicates the percentage of FCM message anchors being

used by Agents to exchange messages.

Collector: CollInstance
FCMReqBlockUtil Y con NA NA NA set by coll graph percentage of FCM
request blocks being
(in DB2 UDB EEE only) used

Indicates the percentage of Fast Communication Manager

(FCM) request blocks being used.

Collector: CollInstance

PATROL Parameter Reference Manual 217

PATROL Parameter Reference Manual 218

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 14 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
KMSocketsOK Y con NA NA NA set by coll graph bool

(in DB2EEE_PARAM only)

Indicates whether the sockets communications the KM

uses to communicate to all the DB2 nodes are running
successfully.

Collector: CollInstance
LocConnExecInDBM Y con NA NA NA set by coll graph number of
application
Indicates the number of local applications that are connections
currently connected to a local database (within the
monitored DB2 DBM instance) that are currently
processing a unit of work.

Collector: CollInstance
LocConnectsToDBM Y con NA NA NA set by coll graph number of
application
Indicates the number of local applications that are connections
currently connected to a local database within the
database instance that is being monitored.

Collector: CollInstance
MaxAgentsRegd Y con NA NA NA set by coll graph number of registered
agents
Indicates the maximum number of agents that the
monitored instance of the Database Manager has
registered concurrently since it was started.

Collector: CollInstance
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 15 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MaxAgentsWaiting Y con NA NA NA set by coll graph number of waiting
agents
Indicates the maximum number of database agents that
have been waiting for a token at the same time since the
monitored instance of the Database Manager was started.

Collector: CollInstance
MaxCoordAgents Y con NA NA NA set by coll graph number of
coordinating agents
(in DB2 UDB EEE only)

Indicates the maximum number of coordinating agents

that can exist at one time on the node.

Collector: CollInstance
NumIdleAgents Y con NA NA NA set by coll graph number of
unassigned agents
Indicates the number of database agents in the agent pool
associated with the monitored DB2 DBM instance that are
currently unassigned to an application.

Collector: CollInstance
PctActiveFCMConns Y con NA NA NA set by coll graph percentage of nodes

(in DB2EEE_NODE only)

Indicates the percentage of nodes with an active

communication connection.

Collector: CollInstance

PATROL Parameter Reference Manual 219

PATROL Parameter Reference Manual 220

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 16 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PctAgentsFromPool Y con NA NA NA set by coll graph percentage of agents
assigned
(in DB2EEE_NODE only)

Indicates the percentage of agents assigned from the

agent pool.

Collector: CollInstance
PctAgentsIdle Y con NA 20–80% 81–100% NA graph percentage of idle
warn alarm agents
Indicates the percentage of idle agents in the monitored
instance of the DBM. This parameter, along with the
NumIdleAgents parameter, can be used to determine the
proper setting of the Num_PoolAgents configuration
parameter.

Collector: CollInstance
PctAgentsRegd Y con NA 80–90% 91–100% NA graph percentage of
warn alarm registered agents
Indicates the percentage of registered agents in the
monitored instance of the DBM. This parameter, along
with the MaxagentsRegd and AgentsRegd parameter, can
be used to determine the proper settins of the
MAXAGENTS configuration parameter.

Collector: CollInstance
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 17 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PctAgentsWaitForTkn Y con NA NA NA set by coll graph percentage of
database agents
Indicates the percentage of database agents waiting for a
token before executing a transaction in the database
manager.

Collector: CollInstance
PctPipedSortReqsAcc Y con NA NA NA set by coll graph percentage of piped
sort requests
Indicates the percentage of piped sort requests that have
been accepted since the database instance started or since
the last time the DB2 monitor was reset.

Collector: CollInstance
PostThreshSorts Y con NA NA NA set by coll graph number sort heap
requests
Indicates the number of sorts that have requested heaps
after the sort heap threshold has been reached.

The SORT DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollInstance
ProblemDB2Agents Y con NA 1 NA set by coll graph number
alarm
(in DB2_PARAM and DB2EEE_PARAM only)

Indicates the status of all agents and subagents running in

an instance and provides annotated data identifying any
agent or subagent in an alert state.

Collector: CollAgent

PATROL Parameter Reference Manual 221

PATROL Parameter Reference Manual 222

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 18 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
RemConnectsToDBM Y con NA NA NA set by coll graph number of remote
connections
Indicates the total number of current connections
initiated from remote clients to the database instance that
is being monitored.

Collector: CollInstance
RemConnExecInDBM Y con NA NA NA set by coll graph number of remote
applications
Indicates the number of remote applications that are processing work
currently connected to a database within the database
instance being monitored and that are currently
processing a unit of work.

Collector: CollInstance
TotSortHeapAlloc Y con NA NA NA set by coll graph number of remote
pages
Indicates the total number of memory pages allocated for
all sorts in progress for the selected database instance.

Collector: CollInstance
UpdateAgentAppFiles Y std NA NA NA 600 sec none none

(in DB2_PARAM and DB2EEE_PARAM only)

Collects information that correlates each DB2 application

with the DB2 agent or agents monitoring that application.

Collector: CollInstance
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 19 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DB2_TSP Application Class in DB2 UDB EE
DB2EEE_TSP Application Class in DB2 UDB EEE
PctPagesUsed Y con NA 80%–95% 95%–100% set by coll graph percentage of
warn alarm tablespace pages
Indicates the percentage of tablespace pages that are
used. For DMS tablespaces, the parameter calculates the
percentage of preallocated space that is used. For SMS
tablespaces, the parameter calculates the percentage of
space used by the tablespace containers on the
filesystems. Recovery action upon alarm is available.

Collector: CollTablespace
PhyReads Y con NA NA NA set by coll graph number of pages read
per sec
Reports the total number of physical reads performed per
second on the monitored table space during the previous
polling interval.

Collector: CollTablespace
PhyWrites Y con NA NA NA set by coll graph number of pages
written per sec
Reports the total number of physical writes performed
per second on the monitored table space during the
previous polling interval.

Collector: CollTablespace
SpaceLeft Y con NA NA NA set by coll graph MB

Indicates the amount of free space in the selected table

space.

Collector: CollTablespace

PATROL Parameter Reference Manual 223

PATROL Parameter Reference Manual 224

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 20 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TblspState Y con NA NA NA set by coll graph DB2 state number

Indicates the state of the selected table space as a

numerically hexadecimal number (where 0 Indicates a
normal state).

Collector: CollTablespace
DB2UDB_BUFFERPOOL Application Class in DB2 UDB EE
DB2EEE_BP_NODE and DB2EEE_BUFFERPOOL (where noted) Application Class in DB2 UDB EEE
AveDirReadTime Y con NA NA NA set by coll graph msec

Indicates the average amount of time required to read a

sector of data from disk at the buffer pool level.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollDatabase
AveDirWriteTime Y con NA NA NA set by coll graph msec

Indicates the average amount of time required to write a

sector of data to disk at the buffer pool level.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollDatabase
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 21 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AveNumPgsReadPerAsyncReq Y con NA NA NA set by coll graph number of pages

Indicates the average number of data pages that have

been read by asynchronous read requests at the buffer
pool level.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
AveNumSectorsRead Y con NA NA NA set by coll graph number of sectors

Indicates the average number of sectors read by a direct

read request at the buffer pool level.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
AveNumSectorsWritten Y con NA NA NA set by coll graph number of sectors

Indicates the average number of sectors written by a

direct write request at the buffer pool level.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool

PATROL Parameter Reference Manual 225

PATROL Parameter Reference Manual 226

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 22 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AvePgCleanWriteTime Y con NA NA NA set by coll graph msec

Indicates the average asynchronous write time that is

required by the Database Manager page cleaners each
time data is written from the buffer pool to disk.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
AvePgReadTime Y con NA NA NA set by coll graph msec

Indicates the average amount of time required to read a

data or index page from the physical disk to the buffer
pool.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
AvePgWriteTime Y con NA NA NA set by coll graph msec

Indicates the average amount of time required to write a

data or index page from the buffer pool to the physical
disk.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 23 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AvePrefetchReadTime Y con NA NA NA set by coll graph msec

Indicates the average asynchronous read time required

by the Database Manager prefetchers each time data is
read from disk into the buffer pool.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
AveSyncBPReadTime Y con NA NA NA set by coll graph msec

Indicates the average amount of time that is required for a

particular synchronous read of data from the disk to the
buffer pool.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
BPDataPgCleanEff Y con NA NA NA set by coll graph number

Indicates the ratio of asynchronous data writes to

synchronous data writes.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool

PATROL Parameter Reference Manual 227

PATROL Parameter Reference Manual 228

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 24 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BPDataWriteReadRatio Y con NA NA NA set by coll graph number

Indicates the number of data reads requiring page-ins to

the buffer pool that cause writes (page-outs) to disk.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
BPIndxPgCleanEff Y con NA NA NA set by coll graph number

Indicates the ratio of asynchronous index writes to

synchronous index writes.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
BPIndxWriteReadRatio Y con NA NA NA set by coll graph number

Indicates the ratio of the number of times a buffer pool

index page is physically written to disk to the number of
read requests required to read index pages into the buffer
pool.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 25 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BufferPoolHitRatio Y con NA NA NA set by coll graph percentage of data
and index reads
(also in DB2EEE_BUFFERPOOL)

Indicates the percentage of data and index reads that did

not require access to the physical disk because the data
was already loaded in the cached memory buffer pool.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
DataPgHitRatio Y con NA NA NA set by coll graph percentage of data
reads
(also in DB2EEE_BUFFERPOOL)

Indicates the percentage of data reads that did not require

physical disk access.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
DBPrefetchEffRatio Y con NA NA NA set by coll graph number

(also in DB2EEE_BUFFERPOOL)

Indicates the ratio of asynchronous data reads to

synchronous data reads.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollInstance

PATROL Parameter Reference Manual 229

PATROL Parameter Reference Manual 230

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 26 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IndxPgHitRatio Y con NA NA NA set by coll graph percentage of index
reads
(also in DB2EEE_BUFFERPOOL)

Indicates the percentage of index reads that did not

require physical disk access.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
SyncBPHitRatio Y con NA NA NA set by coll graph percentage of
synchronous buffer
(also in DB2EEE_BUFFERPOOL) pool accesses

Indicates the percentage of synchronous buffer pool

accesses which resulted in requests for data which did
not require a disk access.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
DB2UDB_COLLECTORS Application Class in DB2 UDB EE
DB2EEE_COLLECTORS Application Class in DB2 UDB EEE
CollAgent Y std NA NA NA 4 min bool none

Collects information and provides the values to the

consumer parameters for monitoring DB2 agents and
applications associated with those agents.
CollBufferpool Y std NA NA NA 10 min bool none

Collects information and provides the values to the

consumer parameters for monitoring DB2 buffer pools.
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 27 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CollConnToDB Y std NA NA NA 7.5 min bool none

Collects information for the ConnToDBOK parameter.

CollDatabase Y std NA NA NA 5 min bool none

Collects information and provides the values to the

consumer parameters for monitoring DB2 databases.
CollDiaglog Y std NA NA NA 5 min bool none

Collects information and provides the values to the

consumer parameters for monitoring the DB2 diagnostic
log.
CollInstance Y std NA NA NA 10 min bool none

Collects information and provides the values to the

consumer parameters for monitoring DB2 instances.
CollPerformance Y std NA NA NA 10 min bool none

Collects performance data for monitoring databases and

provides the values to the consumer parameters in the
DB2DB_PERFORMANCE (or
DB2EEE_PERFORMANCE) application class that are
activated when Advanced Performance Monitoring is
configured.
CollTablespace Y std NA NA NA 6 min bool none

Collects information and provides the values to the

consumer parameters for monitoring DB2 table spaces.

PATROL Parameter Reference Manual 231

PATROL Parameter Reference Manual 232

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 28 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DB2DB_CAPACITY Application Class in DB2 UDB EE
DB2EEEDB_NODE_CAPACITY and DB2EEE_DB_PARAM Application Classes (where noted) in DB2 UDB EEE
AppsConnToDB Y con NA NA NA set by coll graph number of
application
(also in DB2EEE_DB_PARAM) connections

Indicates the number of applications that are currently

connected to the monitored database.

Collector: CollAgent
AveSortHeapUsed Y con NA NA NA set by coll graph number of pages

(also in DB2EEE_DB_PARAM)

Indicates the average number of sort heap pages allocated

for each currently active sort.

Collector: CollDatabase
ConnToDBOK Y con NA 1 2 NA graph number

The ConnToDBOK parameter attempts to connect to the

database. If the connection is unsuccessful, DB2 returns
an SQL message. The value fo ConnToDBOK is set
toeither WARN or ALARM depending on the SQL
message returned. By default, the parameter warns on the
following messages: SQL1116N, SQL1032N, SQL1035N.

Collector:CollConnToDB
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 29 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DatabaseSize Y con or NA NA NA 3 hr or NA graph megabytes
std (see desc)
(also in DB2EEE_DB_PARAM) (see
desc)
In DB2DB_CAPACITY, DatabaseSize is a standard
parameter and indicates the sum of used pages by all the
tablespace containers for the database. Poll time is 3
hours. In DB2EEE_DB_PARAM, DatabaseSize is a
standard parameter and indicates the size of the database
for all nodes. Poll time is 3 hours. In
DB2EEEDB_NODE_CAPACITY, DatabaseSize is a
consumer parameter and indicates the size of the
database of the current node. Poll time is not applicable.
DBSortHeapAlloc Y con NA NA NA set by coll graph number of pages

(also in DB2EEE_DB_PARAM)

Indicates the total number of memory pages currently

allocated for the sort heap for all sorts in the selected
database.

Collector: CollDatabase
MaxDBHeapAlloc Y con NA NA NA set by coll graph number of pages

Indicates the largest portion of database heap that has

been allocated and used by the database since the first
application connection. Not available for versions later
than 6.1 of DB2 Universal Database.

Collector: CollDatabase

PATROL Parameter Reference Manual 233

PATROL Parameter Reference Manual 234

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 30 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MaxNumConcDBConns Y con NA NA NA set by coll graph number of
connections
(also in DB2EEE_DB_PARAM)

Indicates the maximum number of simultaneous

connections that have occurred to the monitored database
since the first application connected to it.

Collector: CollDatabase
MaxPctDBHeapUsed Y con NA 80%–95% 95%–100% set by coll graph percentage of
warn alarm database heap used
Indicates the largest percentage of database heap used by
the database since the first application connected to the
database. Not available

for versions later than 6.1 of DB2 Universal Database.

Collector: CollPerformance
PctAppsConnUsed Y con NA NA NA set by coll graph percentage of
applications
Indicates the percentage of applications that are
connected to the database being monitored.

Collector: CollDatabase
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 31 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DB2DB_LOCK Application Class in DB2 UDB EE
DB2EEEDB_NODE_LOCK and DB2EEE_DB_PARAM Application Classes (where noted) in DB2 UDB EEE
AveWaitForLock Y con NA NA NA set by coll graph msec

(also in DB2EEE_DB_PARAM)

Indicates the average amount of time that any application

running against the database spent waiting before a lock
request was granted.

The LOCK DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollDatabase
Deadlocks Y std NA NA 2 once text none
alarm
(in DB2DB_LOCK and DB2EEE_DB_PARAM only)

Displays information about the deadlocks that have

occurred for the database being monitored. You cannot
monitor this parameter for a remote database.
NumDeadlocks Y con NA NA NA set by coll graph number of deadlocks

(also in DB2EEE_DB_PARAM)

Indicates the total number of deadlocks that have

occurred since the first application connected to the
database being monitored.

Collector: CollDatabase

PATROL Parameter Reference Manual 235

PATROL Parameter Reference Manual 236

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 32 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumExclLockEscals Y con NA NA NA set by coll graph number of
escalations
Indicates the number of times that row locks have been
escalated to one exclusive table lock, or the number of
times an exclusive row lock forced a table lock to become
an exclusive lock.

Collector: CollDatabase
NumLockEscals Y con NA NA NA set by coll graph number of
escalations
Indicates the number of times that row locks have been
escalated to a table lock, including exclusive lock
escalations.

Collector: CollDatabase
NumLocksHeld Y con NA NA NA set by coll graph number of locks

Indicates the number of locks held by all applications in a

particular database.

Collector: CollDatabase
NumLocksRemaining Y con NA NA NA set by coll graph number of locks

Indicates the total number of locks remaining to be

granted to applications connected to the database being
monitored.

Collector: CollDatabase
NumLockTimeouts Y con NA NA NA set by coll graph number of timeouts

Indicates the number of times a request to lock a database

object timed out instead of being granted.

Collector: CollDatabase
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 33 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PctAppsWaitingOnLocks Y con NA NA NA set by coll graph percentage of
applications
Indicates the percentage of applications currently waiting
on locks that are connected to the database being
monitored.

Collector: CollDatabase
PctDBLocklistUsed Y con NA 80%–95% 95%–100% set by coll graph percentage of locklist
warn alarm memory
(also in DB2EEE_DB_PARAM)

Indicates the percentage of the monitored database’s

locklist memory currently in use.

Collector: CollDatabase
PctLockedOutDBConns Y con NA NA NA set by coll graph percentage of
applications
Indicates the percentage of applications that are currently
waiting on locks. This parameter indicates the degree of
lock concurrency for the current set of applications and
therefore can help determine the correct setting for the
maxcagents DBM configuration parameter as well as the
locklist and maxlocks DB configuration parameters.

Collector: CollDatabase
DB2DB_LOG Application Class in DB2 UDB EE
DB2EEEDB_NODE_LOG Application Class in DB2 UDB EEE
LogFSFreeSpace Y con NA NA NA set by coll graph MB

Indicates the amount of free space that is available on the

file system where the DB2 logs reside. You cannot
monitor this paramter for a remote database.

Collector: CollDatabase

PATROL Parameter Reference Manual 237

PATROL Parameter Reference Manual 238

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 34 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LogFSPctUsed Y con NA NA NA set by coll graph percentage of the file
system
Indicates the percentage of the file system used where the
DB2 logs reside. You cannot monitor this parameter for a
remote database.

Collector: CollDatabase
MaxPrimaryLogSpUsed Y con NA NA NA set by coll graph MB

Indicates the maximum amount of primary log space

being used.

Collector: CollDatabase
MaxSecLogSpaceUsed Y con NA NA NA set by coll graph MB

Indicates the maximum amount of secondary log space

being used.

Collector: CollDatabase
MaxTotLogSpaceUsed Y con NA NA NA set by coll graph MB

Indicates the maximum amount of total log space being

used, including both primary and secondary log files.

Collector: CollDatabase
PctPrmryLogSpUsed Y con NA NA NA set by coll graph percentage of
primary log space
Indicates the largest percentage of the monitored
database’s primary log space that is being used.

Collector: CollDatabase
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 35 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PctSecLogsAlloc Y con NA 80–95% 95–100% set by coll graph percentage of
warn alarm secondary log space
Indicates the percentage of the monitored database’s
secondary log space currently being used.

Collector: CollDatabase
PctTotalLogSpUsed Y con NA NA NA NA graph percentage of active
log space
Indicates the percentage of active log space in the
database that is used. Not valid for DB2 v 5.0.

Collector: CollDatabase
PrimaryLogSpaceAlloc Y con NA NA NA set by coll graph MB

Indicates the amount of the monitored database’s

primary log space that is currently allocated.

Collector: CollDatabase
SecLogSpaceAlloc Y con NA NA NA set by coll graph MB

Indicates the amount of the monitored database’s

secondary log space that is currently allocated.

Collector: CollDatabase
TotalLogSpAvail Y con NA NA NA set by coll graph MB

Indicates the total amount of active log space in the

database that is not being used. Not valid for DB2 v 5.0.

Collector: CollDatabase

PATROL Parameter Reference Manual 239

PATROL Parameter Reference Manual 240

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 36 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TotalLogSpUsed Y con NA NA NA set by coll graph MB

Indicates the total amount of active log space in the

database that is currently being used.

Collector: CollDatabase
DB2DB_PERFORMANCE Application Class in DB2 UDB EE
DB2EEEDB_NODE_PERFORMANCE and DB2EEE_DB_PARAM Application Classes (where noted) in DB2 UDB EEE
AveDirReadTime Y con NA NA NA set by coll graph msec

(also in DB2EEE_DB_PARAM)

Indicates the average amount of time required to read a

sector of data from disk at the database level.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollDatabase
AveDirWriteTime Y con NA NA NA set by coll graph msec

(also in DB2EEE_DB_PARAM)

Indicates the average amount of time required to write a

sector of data to disk at the database level.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollDatabase
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 37 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AveElapsedTime Y con NA NA NA set by coll graph sec

(also in DB2EEE_DB_PARAM)

Indicates the running average of elapsed CPU time

during SQL processing for a monitored database.
Advanced Performance Monitoring must be configured.
You cannot monitor this parameter for a remote database.

Collector: CollPerformance
AveNumSectorsRead Y con NA NA NA set by coll graph number of sectors

Indicates the average number of sectors read by a direct

read request at the database level.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool
AveNumSectorsWritten Y con NA NA NA set by coll graph number of sectors

Indicates the average number of sectors written by a

direct write request at the database level.

The BUFFERPOOL DB2 Monitor Switch must be set ON

to make this parameter active and collect data.

Collector: CollBufferpool

PATROL Parameter Reference Manual 241

PATROL Parameter Reference Manual 242

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 38 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AveSortTime Y con NA NA NA set by coll graph msec

(also in DB2EEE_DB_PARAM)

Indicates the average elapsed time spent per database

sort.

The SORT DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollDatabase
CtlgCacheHitRatio Y con NA NA NA set by coll graph percentage of catalog
references
Indicates the percentage of catalog references that did not
require a catalog access (has a default value of 100).

Collector: CollAgent
DBFilesClosed Y con NA NA NA NA graph number of closed
database files
Indicates the total number of database files closed. The
actual number of files opened may not equal the number
of files that were closed. The BUFFERPOOL DB2 Monitor
Switch must be set to ON to make this paramter active
and collect data.

Collector: CollDatabase
ElapsedTime Y con NA NA NA set by coll graph sec

(also in DB2EEE_DB_PARAM)

Indicates the amount of elapsed time during SQL

processing associated with a selected database. Advanced
Performance Monitoring must be configured. You cannot
monitor this parameter for a remote database.

Collector: CollPerformance
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 39 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PkgCacheHitRatio Y con NA NA NA set by coll graph percentage

Indicates the percentage of times an application found a

section or package in the package cache without causing
it to be loaded.

Collector: CollAgent
PctOverflowSortReqs Y con NA NA NA set by coll graph percentage of sorts

(also in DB2EEE_DB_PARAM)

Indicates the percentage of sorts for the selected database

that did not have enough sort heap allocated and that
required temporary disk space for storage purposes.

The SORT DB2 Monitor Switch must be set ON to make

this parameter active and collect data.

Collector: CollDatabase
ResponseExecTime N con NA NA NA set by coll graph sec

(also in DB2EEE_DB_PARAM)

Reports the amount of time required to execute the

response.sql file located in the $PATROL_HOME/../db2
directory. You cannot monitor this parameter for a
remote database.

Collector: CollDatabase

PATROL Parameter Reference Manual 243

PATROL Parameter Reference Manual 244

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 40 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TableSpaceIO Y con NA NA NA set by coll graph NA

Monitors I/O time for a specified list of table spaces,

indicating which table spaces are busier than others.

TableSpaceIO needs to be configured and started.

TableSpaceIO also requires that the BUFFERPOOL
monitoring switch be ON and table space discovery
enabled.

The parameter value is text annotated with each data

point. The text contains a sorted list of table space names
and their associated I/O times, with the busiest table
space being at the top.

Collector: CollTablespace
TotThroughput Y con NA NA NA set by coll graph number of SQL
statements
Indicates the total number of SQL statements that have
been performed successfully against the selected
database.

Collector: CollDatabase
TotUOW Y con NA NA NA set by coll graph number of commits
and rollbacks
(also in DB2EEE_DB_PARAM)

Indicates the total number of commits and rollbacks,

including internal commits and rollbacks, that have been
attempted against the selected database.

Collector: CollDatabase
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 41 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DB2DB_RECOVERY Application Class in DB2 UDB EE
DB2EEEDB_NODE_RECOVERY Application Class in DB2 UDB EEE
BackupCount Y con NA NA NA set by coll graph number of backups

Indicates the number of backups in the backup directory

for a database. The backup directory is the physical file
where backups are stored. This parameter does not work
if backups are not stored on a file system (for example,
TSM backups). Multiple backups taken on the same day
count as one backup. The backup directory name is set by
the Configure Backup Directory Menu command which
can be executed from the DB2DB_RECOVERY/
DB2EEEDB_NODE_RECOVERY application class under
Backup. The parameter value is useful in determining
how many backups have been taken for a database. You
cannot monitor this parameter for a remote database.

Collector: CollDatabase
BackupTime Y con NA NA NA set by coll graph number of hours

Indicates the number of hours from the last time a backup

was taken on the database. This parameter value is useful
in determining the age and time of backups. As a backup
ages, the value of this parameter increases with time.
When a new backup is taken, the graph will show a
decrease in the value. You can use the annotated data
point to find out the time of the last backup.

Collector: CollDatabase
HistFSFreeSpace Y con NA NA NA set by coll graph MB

Indicates the amount of free space that is available on the

file system where the history logs reside. You cannot
monitor this parameter for a remote database.

Collector: CollDatabase

PATROL Parameter Reference Manual 245

PATROL Parameter Reference Manual 246

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 42 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
HistFSPctUsed Y con NA NA NA set by coll graph percentage of the file
system
Indicates the percentage of the file system used where the
history logs reside. You cannot monitor this parameter
for a remote database.

Collector: CollDatabase
IndoubtTrans Y con NA NA NA set by coll graph number of indoubt
transactions
Indicates the existence of indoubt transactions in a
database. This parameter receives its collected value
when Indoubt Transaction Monitoring is turned ON
using the menu command Start Indoubt Trans Monitor.
Collecting will become inactive if the menu command
Stop Indoubt Trans is issued. In addition, you can use the
menu command Ack Indoubt Trans Alarm to
acknowledge an active alarm indicating the existence of
indoubt transactions in the database. An annotated data
point is plotted with information about the transactions
when indoubt transactions are detected. Start Indoubt
Trans Monitor, Stop Indoubt Trans Monitor, and Ack
Indoubt Trans Alarm are available from the
DB2_RECOVERY/ DB2EEEDB_NODE_RECOVERY
application class under Indoubt Transaction.

Collector: CollDatabase
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 43 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ReorgCheck Y std NA 1 NA set by coll graph bool
alarm
Detects tables that are candidates for reorganization.

This parameter has a value of zero when no table needs to

be reorganized. It goes into alarm with the value of 1
when there are tables that are candidates for
reorganization. An annotated data point is then plotted
with DB2's reorgchk information on these tables.

Collector: CollDatabase
DB2DB_SQL Application Class in DB2 UDB EE
DB2EEEDB_NODE_SQL Application Class in DB2 UDB EEE
DDLTotStmts Y con NA NA NA set by coll graph percentage

Indicates the ratio of SQL DDL statements to total SQL

statements that have been attempted against the selected
database.

Collector: CollDatabase
IntAutoRebindTotStmts Y con NA NA NA set by coll graph percentage

Indicates the ratio of the total number of automatic

rebinds or recompiles that have been attempted to the
total SQL statements attempted against the selected
database.

Collector: CollDatabase
SelectTotStmts Y con NA NA NA set by coll graph percentage

Indicates the ratio of SQL SELECT statements to the total

SQL statements that have been attempted against the
selected database.

Collector: CollDatabase

PATROL Parameter Reference Manual 247

PATROL Parameter Reference Manual 248

Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 44 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UpdInsDelTotStmts Y con NA NA NA set by coll graph percentage

Indicates the ratio of SQL UPDATE, INSERT, and

DELETE statements to total SQL statements that have
been attempted against the selected database.

Collector: CollDatabase
SPACE_EXPERT_DB2 Application Class
SPACE_EXPERT_DB2_TS Application Class
SPACE_EXPERT_DB2_OBJ Application Class
find_problems Y coll NA NA NA 1800 sec text NA

(SPACE_EXPERT_DB2 application)

Collects the information fro the parameters in the

SPACE_EXPERT_DB2_OBJ and the
SPACE_EXPERT_DB2_TS applications. The
SPACE_EXPERT_DB2 application requires that Space
Expert be installed and configured on the monitored
instance. If the SPACE_EXPERT_DB2 icon is dimmed,
Space Expert is not installed on the instance.
StorageProblems Y con undef undef undef set by coll text problem report

(SPACE_EXPERT_DB2_OBJ application)

Lists any medium or high problems found in a table or

index on the monitored instance. Low problems are
included in the text of the parameter if medium or high
problems are also found.
Table 9 PATROL for DB2 Universal Database 6.4.20 (Part 45 of 45)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
StorageProblems Y con undef undef undef set by coll text problem report

(SPACE_EXPERT_DB2_TS application)

Lists any medium or high problems found in a tablespace

on the monitored instance. Low problems are included in
the text of the paramter if medium or high problems are
also found.
StorageProblemsCnt Y con undef 1–1024000 undef set by coll gauge number of tables and
alarm indexes with a
(SPACE_EXPERT_DB2_OBJ application) problem

Displays the number of tables or indexes in the

configured instance with a medium or high problem.
StorageProblemsCnt Y con undef 1–1024000 undef set by coll gauge number of
alarm tablespaces with a
(SPACE_EXPERT_DB2_TS application) problem

Displays the number of tablespaces in the configured

instance with a medium or high problem.

PATROL Parameter Reference Manual 249

PATROL Parameter Reference Manual 250
PATROL for Dell OpenManage 1.3.01

Table 10 PATROL for Dell OpenManage 1.3.01 (Part 1 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Collector Application Class
DELLConnectionCol Y std 0–2 2 NA 15 min bool integer
alarm
Collects data about chassis connection status and
populates all DELLConnectionStatus consumer
parameters.
DELLContainerCol Y std 0–2 2 NA 15 min bool integer
alarm
Collects data about chassis security status and populates
all DELLChassisIntrusion consumer parameters.
DELLCurrentCol Y std 0–2 2 undef 15 min bool integer
alarm
Collects data about current status and populates all
DELLCurrentStatus parameters.
DELLFanCol Y std 0–2 2 undef 15 min bool integer
alarm
Collects data about fan status and populates all
DELLFanStatus consumer parameters.
DELLMemoryCol Y std 0–2 2 undef 15 min bool integer
alarm
Collects data about memory status and populates all
DELLMemoryStatus consumer parameters.
DELLNetworkCol Y std 0–2 2 undef 15 min bool integer
alarm
Collects data about network error status and populates all
Network application parameters.

PATROL Parameter Reference Manual 251

PATROL Parameter Reference Manual 252

Table 10 PATROL for Dell OpenManage 1.3.01 (Part 2 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DELLPowerSupplyCol Y std 0–2 2 undef 15 min bool integer
alarm
Collects data about power supply status and populates
all Power Supply application parameters.
DELLRaidCol Y std 0–2 2 undef 15 min bool integer
alarm
Collects data about RAID logical and physical drive
status and populates all RAID application parameters.
DELLScsiCol Y std 0–2 2 undef 15 min bool integer
alarm
Collects data about SCSI controller and device status and
populates all SCSI application parameters.
DELLSNMPTrapCol Y std 0–2 2 undef 15 min bool integer
alarm
Listens for and processes all SNMP traps sent to the local
server.
DELLTempCol Y std 0–2 2 undef 15 min bool integer
alarm
Collects data about temperature status and populates all
DELLTempStatus consumer parameters.
DELLVoltageCol Y std 0–2 2 undef 15 min bool integer
alarm
Collects data about voltage status and populates all
DELLVoltageStatus consumer parameters.
Container Application Class
DELLChassisIntrusion Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the security status of the chassis.

Collector: DELLContainerCol
Table 10 PATROL for Dell OpenManage 1.3.01 (Part 3 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DELLConnectionStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the status of an external chassis to the main

system chassis.

Collector: DELLConnectionCol
DELLMemoryStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the server’s memory status.

Collector: DELLMemoryCol
Current Application Class
DellCurrentStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the status reported by the current probe instance.

Collector: DELLCurrentCol
Dell Computer Application Class
DELLsnmpTrapsReceived Y std 0–250 50–250 NA 10 min graph traps per min

Tracks the average number of SNMP traps received per

minute during the last polling interval. This includes
SNMP traps from all sources; however, the only SNMP
device that should be configured to send traps to the
server is the local server itself.
Fan Application Class
DELLFanStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the status reported by the fan probe instance.

Collector: DELLFanCol

PATROL Parameter Reference Manual 253

PATROL Parameter Reference Manual 254

Table 10 PATROL for Dell OpenManage 1.3.01 (Part 4 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Network Application Class
DELLIntfOperStatus Y con >0 2 3 set by coll stoplight integer
alarm warn
Indicates the current operational state of the interface.

Collector: DELLNetworkCol
DELLNetworkHostErrors Y con >0 1-1 undef set by coll graph number of errors per
min
Reflects the average number of host errors.

Collector: DELLNetworkCol
DELLNetworkReceiveErrors Y con >0 1-1 undef set by coll graph number of errors per
min
Reflects the average number of receive errors per minute
detected by the network interface during the last polling
interval.

Collector: DELLNetworkCol
DELLNetworkWireErrors Y con >0 1–1 undef set by coll graph number of errors per
min
Reflects the average number of wire errors per minute
detected by the network interface during the last polling
interval.

Collector: DELLNetworkCol
DELLNetworkTransmitErrors Y con 1–6 1–1 undef set by coll graph number of errors per
min
Reflects the average number of transmit errors per
minute detected by the network interface during the last
polling interval.

Collector: DELLNetworkCol
Table 10 PATROL for Dell OpenManage 1.3.01 (Part 5 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Power Supply Application Class
DELLPowerSupplyStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the status of the power supply instance.

Collector: DELLPowerSupplyCol
DELLRedundancyStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the status of the power supply redundancy.

Collector: DELLPowerSupplyCol
Raid Application Class
DELLRaidPercLogDrive Y con 3–6 2 3 set by coll stoplight integer
warn alarm
Reflects the status of the current PERC logical drive as
reported by Dell Array Manager v3.1.1 or higher.

Collector: DELLRaidCol
DELLRaidPercLogicalDrive Y con 0–4 1–1 undef set by coll stoplight integer

Reflects the status of the current PERC or PERC 2/SC

logical drive.

Collector: DELLRaidCol
DELLRaidPerc2LogicalDrive Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the status of the current PERC 2 logical drive.

Collector: DELLRaidCol

PATROL Parameter Reference Manual 255

PATROL Parameter Reference Manual 256

Table 10 PATROL for Dell OpenManage 1.3.01 (Part 6 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DELLRaidPercPhysDrive Y con 3–6 2 3 set by coll stoplight integer
warn alarm
Reflects the status of the current PERC physical drive as
reported by Dell Array Manager v3.1.1 or higher.

Collector: DELLRaidCol
DELLRaidPercPhysicalDrive Y con 1–20 1–1 undef set by coll stoplight integer

Reflects the status of the current PERC or PERC 2/SC

physical drive.

Collector: DELLRaidCol
DELLRaidPerc2PhysicalDrive Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the status of the current PERC 2 physical drive.

Collector: DELLRaidCol
SCSI Application Class
DELLSCSIContPredictedStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the predicted status of the SCSI controller.

Collector: DELLScsiCol
DELLSCSIContStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the current status of the SCSI controller.

Collector: DELLScsiCol
DELLSCSIDevicePredictedStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the reported predicted status of the SCSI device.

Collector: DELLScsiCol
Table 10 PATROL for Dell OpenManage 1.3.01 (Part 7 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DELLSCSIDeviceStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the current status of the SCSI device.

Collector: DELLScsiCol
DELLSCSIOverallStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the overall status of the SCSI subsystem,

including the controller and the devices.

Collector: DELLScsiCol
Temperature Application Class
DELLTempStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the status reported by the temperature probe.

Collector: DELLTempCol
Voltage Application Class
DELLVoltageStatus Y con 1–6 1–1 undef set by coll stoplight integer

Reflects the status reported by the voltage probe.

Collector: DELLVoltageCol

PATROL Parameter Reference Manual 257

PATROL Parameter Reference Manual 258
PATROL KM for Event Management 2.6.00

Table 11 PATROL KM for Event Management 2.6 (Part 1 of 3)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AS_AVAILABILITY Application Class
AlertTest Y con undef 1–50 51–100 NA gauge 51 = Alarm,
1 = Warn, 0 = OK
Tests the notification systems and rules without forcing a
parameter into an alarm state.

Collector: NA
AgentPingFailures Y con undef undef 1–1 set by graph 1 = Alarm, 0 = OK
AvailabilityMonito
Indicates the availability of the PATROL Agent. This rColl (2 min and 3
parameter is displayed only if you have configured sec)
availability monitoring.

Collector: AvailabilityMonitorColl
AvailabilityMonitorColl Y coll undef undef undef 2 min and 3 sec text NA

Checks the availability of monitored agents and sets the

value of the HostPingFailures parameter, the
AgentPingFailures parameter, and the SnmpPingFailures
parameter.
HostPingFailures Y con undef undef 1–1 set by graph 1 = Alarm, 0 = OK
AvailabilityMonito
Indicates the availability of the PATROL Agent host using an rColl (2 min and 3
ICMP ping. sec)

Collector: AvailabilityMonitorColl

PATROL Parameter Reference Manual 259

PATROL Parameter Reference Manual 260

Table 11 PATROL KM for Event Management 2.6 (Part 2 of 3)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SnmpPingFailures Y con undef 1–1 2–2 set by graph 2 = Alarm, 1 = Warn,
AvailabilityMonito 0 = OK
Indicates the availability of the SNMP agent. rColl (2 min and 3
sec)
Collector: AvailabilityMonitorColl
AS_EVENTSPRING Application Class
AlertTest Y con undef 1–50 51–100 NA gauge 51 = Alarm,
1 = Warn, 0 = OK
Tests the notification systems and rules, without forcing a
parameter into an alarm state.

Collector: NA
AgentLoginDenied Y con 0–0 undef undef NA graph 1 = Alarm, 0 = OK

Monitors failed login attempts to the agent. This parameter

alarms immediately upon a failed login.

Collector: NA
BlackoutEvents Y con undef undef undef NA graph Number of events

The number of blackout NOTIFY events processed by

PATROL KM for Event Management during the collection
cycle.

Collector: EventCollector
EscalatedEvents Y con undef undef undef NA graph Number of events

The number of escalated NOTIFY events processed by the

PATROL KM for Event Management during the collection
cycle.

Collector: EventCollector
Table 11 PATROL KM for Event Management 2.6 (Part 3 of 3)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
EventCollector Y coll undef undef undef 30 sec NA NA

Collects the NOTIFY events on the monitored agent and sets

the value of the NotifiedEvents parameter, the
EscalatedEvents parameter, and the BlackoutEvents
parameter.
NotifiedEvents Y con undef undef undef NA graph Number of events

The number of OK, ALARM, and WARN NOTIFY events

processed by the PATROL KM for Event Management
during the collection cycle.

Collector: EventCollector
RefreshParamSettings Y std 0–1000 1–1000 1–1000 1 min and 35 sec graph 1000 = Alarm
inactive by inactive by
Updates parameter settings as required. default default
ResendAlertQueue Y std undef undef undef 10 min graph NA

The number of alerts that had been resent during the

previous polling cycle because the parameters remain in an
ALARM or WARN state in consecutive polling periods.
RetriggerEventQueue Y std undef undef undef 2 min and 5 sec graph NA

Retriggers events that failed to be sent to a notification server.

PATROL Parameter Reference Manual 261

PATROL Parameter Reference Manual 262
PATROL for Informix 9.1.10

Table 12 PATROL for Informix 9.1.10 (Part 1 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Informix Component 9.1.10
IFMXDS_AVAILABILITY Application Class
ArchiveLevel0 Y con undef 7–100 undef set by coll graph number of days
warn
Appears only when your environment uses Ontape to
backup the server.

Displays the number of days since the last level 0 archive.

Collector: ArchiveMonitor
ArchiveLevel1 Y con undef 2–100 undef set by coll graph number of days
warn
Appears only when your environment uses Ontape to
backup the server.

Displays the number of days since the last level 1 archive.

Collector: ArchiveMonitor
ArchiveLevel2 Y con undef 1–100 undef set by coll graph number of days
warn
Appears only when your environment uses Ontape to
backup the server.

Displays the number of days since the last level 2 archive.

Collector: ArchiveMonitor

PATROL Parameter Reference Manual 263

PATROL Parameter Reference Manual 264

Table 12 PATROL for Informix 9.1.10 (Part 2 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CheckpointDuration Y con undef 3–4 5–100 set by coll graph sec
warn alarm
Displays the check point interval for “Checkpoint
Completed” messages. These messages are written to the
Informix Dynamic Server error log that is defined by the
MSGPATH configuration parameter. This instance must
exceed thresholds 5 times before the alarms or warnings
are activated.

Collector: ErrorLogMonitor
CheckpointFrequency Y con undef 0–4 6–100 set by coll graph min
warn alarm
Displays the number of minutes between checkpoints
using the timestamp for “Checkpoint Completed”
messages. These messages are written to the error log that
is defined by the MSGPATH configuration parameter.

Collector: ErrorLogMonitor
ChunkDown Y con 0–100 undef 1–100 set by coll gauge number of chunks
alarm alarm
Displays the number of chunks that are down for the
server.

Collector: Onstat_dMonitor
DbsLevel0 Y con 0–30 7–30 undef set by coll graph number of days
alarm warn
Appears only when your environment uses OnBar to
backup the server.

Displays the number of days since the last level zero

archive.

Collector: OnbarMonitor
Table 12 PATROL for Informix 9.1.10 (Part 3 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DbsLevel1 Y con 0–30 2–30 undef set by coll graph number of days
alarm warn
Appears only when your environment uses OnBar to
backup the server.

Displays the number of days since the last level one

archive.

Collector: OnbarMonitor
DbsLevel2 Y con 0–30 1–30 undef set by coll graph number of days
alarm warn
Appears only when your environment uses OnBar to
backup the server.

Displays the number of days since the last level two

archive.

Collector: OnbarMonitor
EventSeverity Y con 3–5 3–3 4–5 set by coll graph severity level (3–5)
OK warn alarm
Captures and displays the severity rating for each event
reported to the message log, and annotates the events that
are given a severity level of 3, 4, or 5 with the error
message.

Collector: ErrorLogMonitor
FullestChunk Y con undef 70–90 90–100 set by coll gauge percentage full for
warn alarm the fullest chunk
Displays the percent full for the fullest chunk on the
server.

Collector: Onstat_dMonitor

PATROL Parameter Reference Manual 265

PATROL Parameter Reference Manual 266

Table 12 PATROL for Informix 9.1.10 (Part 4 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FullestDbs Y con undef 80–90 90–100 set by coll gauge percentage full for
warn alarm fullest dbspace
Displays the percent full for the fullest dbspace on the
server.

Collector: Onstat_dMonitor
FullestMetadata Y con undef 80–90 90–100 set by coll gauge percentage full for
warn alarm fullest metadata
Displays the percent full for the fullest metadata on the
server.

Collector: Onstat_dMonitor
InstanceStatus Y con undef 1 2 set by coll bool none
warn alarm
Displays status changes for the server instance.

Collector: InstanceStatusMonitor
LogSpace Y con undef 60–80 80–100 set by coll gauge percentage of total
warn alarm logical space used
Displays the percentage of the total logical log space that
is used for the server.

Collector: Onstat_dMonitor
OnBarActivityStatus Y std undef 1–1 2–50 2 min bool none
warn alarm
Displays the percentage of warnings and errors found in
the Informix ON-Bar Activity Log for each server.
OnBarFailures Y std 0–10 alarm 1–10 undef 12 hrs graph number of failures
warn
Displays only when your environment uses OnBar to
backup the server.

Displays the number of failures found in the backup and

recovery error log.
Table 12 PATROL for Informix 9.1.10 (Part 5 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UsedSpace Y con undef 80–89 90–100 set by coll graph percentage of total
warn alarm space used per
Displays the percentage of total space used for each dbspace
dbspace on the server.

Collector: Onstat_dMonitor
VPList Y con undef undef undef set by coll text none

Displays a list of virtual processors for the server.

Collector: VPMonitor
VPTotal Y con undef undef undef set by coll graph number of processors

Displays the total number of virtual processors on the

server.

Collector: VPMonitor
IFMXDS_CAPACITY Application Class
ActiveLocks Y con undef 90–95 95–100 set by coll gauge percentage of total
warn alarm locks
Displays the percentage of total locks that are active for
the server.

Collector: OnstatMonitor
BufferOverflow Y con undef 5–100 undef set by coll graph number of attempts
warn
Displays the number of attempts made to exceed the
shared memory buffer limit (buffer overflows) for the
server.

Collector: OnstatMonitor

PATROL Parameter Reference Manual 267

PATROL Parameter Reference Manual 268

Table 12 PATROL for Informix 9.1.10 (Part 6 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BufferWaits Y con undef 40–60 61–100 set by coll graph number of buffer
warn alarm waits
Displays the number of buffer waits for the selected
server.

Collector: OnstatMonitor
CheckpointWaits Y con undef 60–100 undef set by coll graph number of check
warn point waits
Displays the number of check point waits for the selected
server.

Collector: OnstatMonitor
Deadlock_Timeout Y con undef 1–50 51–100 set by coll graph number of dead lock
warn alarm time outs
Displays the number of times that a dead lock time out
value was exceeded for the selected server.

Collector: OnstatMonitor
Deadlocks Y con undef 10–50 51–100 set by coll graph number of potential
warn alarm dead locks
Displays the number of potential dead locks that were
detected and prevented for the selected server.

Collector: OnstatMonitor
LatchWaits Y con undef undef 51–100 set by coll graph number of thread
alarm waits
Displays the number of times a thread waits to access
shared memory for the selected server.

Collector: OnstatMonitor
Table 12 PATROL for Informix 9.1.10 (Part 7 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LockOverflow Y con undef 5–25 26–100 set by coll graph number of attempts
warn alarm
Displays the number of times an attempt was made to
exceed the locks limit for the selected server.

Collector: OnstatMonitor
LockWaits Y con undef 10–20 21–100 set by coll gauge number of thread
warn alarm waits
Displays the number of times a thread waits for a lock for
the selected server.

Collector: OnstatMonitor
PhysicalLogSize Y con undef 1–40 undef set by coll gauge number of pages
warn
Displays the size of the physical log buffers for the
selected server.

Collector: Onstat_IMonitor
TableOverflow Y con undef 1–5 5–100 set by coll graph number of attempts
warn alarm
Displays the number of attempts to exceed the table space
(tblspace) limits for the selected server.

Collector: OnstatMonitor
UserOverflow Y con undef 1–5 6–100 set by coll graph number of attempts
warn alarm
Displays the total number of attempts to exceed the user
limit on the selected server.

Collector: OnstatMonitor

PATROL Parameter Reference Manual 269

PATROL Parameter Reference Manual 270

Table 12 PATROL for Informix 9.1.10 (Part 8 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IFMXDS_COLLECTORS Application Class
ArchiveMonitor Y std undef 1–50 undef 12 hr bool none
warn
Appears only when Ontape is used to backup the server.

Gathers the archive information by using the results from

oncheck-pr and by checking the sysutils database.
DBSpaceMonitor Y std undef 1–50 undef 25 min bool none
warn
Monitors the dbspaces selected for monitoring using the
Monitor by Dbspace menu command. For the
selected dbspaces, it reports the space used versus the
space allocated for each dbspace and the reads, the
writes, the page reads, and the page writes for each
chunk.
ERMonitor Y std undef 1–50 undef 10 min bool none
warn
Discovers and creates the Informix Enterprise Replication
instances. The ER database must exist.
ErrorLogMonitor Y std undef 1–50 undef 1 min bool none
warn
Monitors the Informix Dynamic Server error log, as
defined by the MSGPATH configuration parameter, and
displays the diagnostic and status messages written
during operation by the selected server.
FragChecker Y std undef 1–50 undef 12 hr bool none
warn
Monitors the number of fragments for each monitored
table and determines whether the number of fragments
for a table exceeds the user-defined threshold. If the
number of fragments for a table exceeds the threshold,
then the IFMXDS_FRAG instances created for those
fragments are deleted and replaced by
IFMXDS_FRAG_SUM instances.
Table 12 PATROL for Informix 9.1.10 (Part 9 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FragMonitor Y std undef 1–50 undef 20 min bool none
warn
Monitors the logically fragmented tables listed by the
FragChecker parameter for the selected server. Creates
and destroys the Frag and Frag_Ext application instances.
OnbarMonitor Y std undef undef undef 12 hr bool none

Appears only when OnBar is used to backup the server.

Uses the Informix OnBar utility to monitor the status of

the level0, level1, and level2 backups for each instance.
Onstat_dMonitor Y std undef 1–50 undef 16 min bool none
warn
Uses the onstat -d utility to monitor the chunks and
dbspaces for the selected server.This collector also
monitors the smart blob or metadata spaces.
Onstat_FMonitor Y std undef 1–50 undef 30 min bool none
warn
Uses the onstat -F utility to monitor the page cleaners and
foreground writes for the selected server.
Onstat_IMonitor Y std undef 1–50 undef 13 min bool none
warn
Uses the onstat -l utility to monitor the information on the
physical and logical logs on the selected server.
OnstatMonitor Y std undef 1–50 undef 6 min bool none
warn
Uses the onstat -p utility to monitor the profile counts
for the selected server.
PDQMonitor Y std undef 1–50 undef 10 min bool none
warn
Monitors the resources used by the Decision Support
feature when it is activated.

PATROL Parameter Reference Manual 271

PATROL Parameter Reference Manual 272

Table 12 PATROL for Informix 9.1.10 (Part 10 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SesMonitor Y std undef 1–50 undef 8 min bool none
warn
Monitors the active user sessions on the selected server.
SQLViewerMonitor Y std undef 1–50 undef 5 min bool none
warn
Captures the SQL statements that are processed by the
Informix Dynamic Server database engines for the
selected server and writes them to a flat file of the user’s
choosing. This parameter does not display the sql
statements directly; you can view the sql statements
through the SQL Viewer menu selections.
TblMonitor Y std undef 1–50 undef 25 min bool none
warn
Monitors the active tables in sysptprof for the selected
server.
TBSMonitor Y std undef 1–50 undef 15 min bool none
warn
Monitors the active tables by specified table or criteria for
the selected server.
TempDBSMonitor Y std undef 1–50 undef 12 min bool none
warn
Monitors the dbspaces and chunks as defined in the
DPSPACETEMP parameter in the ONCONFIG file, for
the selected server, when there are Temp DBSpaces in the
ONCONFIG file. This parameter reports the space used
versus the space allocated for each dbspace, and reports
the reads, writes, page reads, and page writes for each
chunk. It does not report on temp dbspaces if the value
for DBSPACETEMP is set to ALL or NOTCRITICAL. This
parameter is inactive if there are no temp dbspaces to
monitor.
Table 12 PATROL for Informix 9.1.10 (Part 11 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UserMonitor Y std undef 1–50 undef 16 min bool none
warn
Monitors the active user sessions by specified user,
criteria, or session ID for the selected server. This
standard parameter with collector properties creates the
instances found under the IFMXDS_USER application.
VPMonitor Y std undef 1–50 undef 10 min bool none
warn
Monitors the virtual processors on the selected server.
This collector sets the values for the VPList and VPTotal
consumer parameters.
IFMXDS_DBS Application Class
DBSpaceAllocated Y con 0–100 80–90 90–100 set by coll gauge percentage of space
alarm warn alarm allocated in each
Displays the percentage of total space in each dbspace dbspace
that is allocated for the selected server.

Collector: DBSpaceMonitor
DBSpaceUsed Y con 0–100 80–90 90–100 set by coll gauge percentage of total
alarm warn alarm space used on each
Displays the percentage of total space on each dbspace dbspace
that was used as of the last high water mark for the
selected server.

Collector: DBSpaceMonitor
MetadataUsed Y con 0–100 80–90 90–100 set by coll gauge percentage of used
alarm warn alarm metadata
Displays the percentage of used metadata for each blob
space for each instance.

Collector: Onstat_dMonitor

PATROL Parameter Reference Manual 273

PATROL Parameter Reference Manual 274

Table 12 PATROL for Informix 9.1.10 (Part 12 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IFMXDS_DBS_CHK Application Class
PageRead Y con undef undef undef set by coll graph number of reads per
chunk
Displays the number of page reads for each chunk for the
selected server.

Collector: DBSpaceMonitor
PageWrite Y con undef undef undef set by coll graph number of writes per
chunk
Displays the number of page writes for each chunk for
the selected server.

Collector: DBSpaceMonitor
Read Y con undef undef undef set by coll graph number of reads per
chunk
Displays the number of reads for each chunk for the
selected server.

Collector: DBSpaceMonitor
Write Y con undef undef undef set by coll graph number of writes per
chunk
Displays the number of writes for each chunk for the
selected server.

Collector: DBSpaceMonitor
IFMXDS_DBSTEMP Application Class
TempDBSpaceAllocated Y con 0–100 80–89 90–100 set by coll gauge percentage of space
alarm warn alarm that is allocated
Displays the percentage of total space in each temporary
dbspace that is allocated for the selected server.

Collector: TempDBSMonitor
Table 12 PATROL for Informix 9.1.10 (Part 13 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TempDBSpaceUsed Y con 0–100 80–89 90–100 set by coll gauge percentage of space
alarm warn alarm that is used
Displays the percentage of total space on each temporary
dbspace that was used as of the last water mark for the
selected server.

Collector: TempDBSMonitor
IFMXDS_DBSTEMP_CHK Application Class
TempPageRead Y con undef undef undef set by coll graph number of reads per
chunk
Displays the number of page reads for each chunk for the
selected server.

Collector: TempDBSMonitor
TempPageWrite Y con undef undef undef set by coll graph number of writes per
chunk
Displays the number of page writes for each chunk for
the selected server.

Collector: TempDBSMonitor
TempRead Y con undef undef undef set by coll graph number of reads per
chunk
Displays the number of reads for each chunk for the
selected server.

Collector: TempDBSMonitor
TempWrite Y con undef undef undef set by coll graph number of writes per
chunk
Displays the number of writes for each chunk for the
selected server.

Collector: TempDBSMonitor

PATROL Parameter Reference Manual 275

PATROL Parameter Reference Manual 276

Table 12 PATROL for Informix 9.1.10 (Part 14 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IFMXDS_FRAG_EXT Application Class
FragDeadLocks Y con undef undef undef set by coll graph number of deadlocks
per partition
Displays the number of deadlocks for each of the logically
fragmented tblspaces (partitions) for the selected server.

Collector: FragMonitor
FragDeletes Y con undef undef undef set by coll graph number of deletes
per partition
Displays the number of deletes for each of the logically
fragmented tblspaces (partitions) for the selected server.

Collector: FragMonitor
FragLockRequests Y con undef undef undef set by coll graph number of lock
requests per partition
Displays the number of lock requests for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor
FragLockWaits Y con undef undef undef set by coll graph number of lock waits
per partition
Displays the number of lock waits for each of the logically
fragmented tblspaces (partitions) for the selected server.

Collector: FragMonitor
FragPageReads Y con undef undef undef set by coll graph number of reads per
partition
Displays the number of page reads for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor
Table 12 PATROL for Informix 9.1.10 (Part 15 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FragPageWrites Y con undef undef undef set by coll graph number of writes per
partition
Displays the number of page writes for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor
FragSeqScans Y con undef undef undef set by coll graph number of sequential
scans per partition
Displays the number of sequential scans for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor
IFMXDS_FRAG_SUM Application Class
FragSDeadLocks Y con undef undef undef set by coll graph number of deadlocks
per fragmented table
Displays a summary of the number of deadlocks for the
logically fragmented tablespaces (partitions) for each
instance.

Collector: FragMonitor
FragSDeletes Y con undef undef undef set by coll graph number of deletes
per fragmented table
Displays a summary of the number of deletes for the
logically fragmented tablespaces (partitions) for each
instance.

Collector: FragMonitor

PATROL Parameter Reference Manual 277

PATROL Parameter Reference Manual 278

Table 12 PATROL for Informix 9.1.10 (Part 16 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FragSLockRequests Y con undef undef undef set by coll graph number of lock
requests per
Displays a summary of the number of lock requests for fragmented table
the logically fragmented tablespaces (partitions) for each
instance.

Collector: FragMonitor
FragSLockWaits Y con undef undef undef set by coll graph number of lock waits
per fragmented table
Displays a summary of the number of lock waits for the
logically fragmented tablespaces (partitions) for each
instance.

Collector: FragMonitor
FragSPageReads Y con undef undef undef set by coll graph number of page reads
per fragmented table
Displays a summary of the number of page reads for the
logically fragmented tablespaces (partitions) for each
instance.

Collector: FragMonitor
FragSPageWrites Y con undef undef undef set by coll graph number of page
writes per
Displays a summary of the number of page writes for the fragmented table
logically fragmented tablespaces (partitions) for each
instance.

Collector: FragMonitor
FragSSeqScans Y con undef undef undef set by coll graph number of sequential
scans per fragmented
Displays a summary of the number of sequential scans for table
the logically fragmented tablespaces (partitions) for each
instance.

Collector: FragMonitor
Table 12 PATROL for Informix 9.1.10 (Part 17 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IFMXDS_PDQ Application Class
CpuVpUsage Y con undef 0–10 95–100 set by coll graph percentage of CPU
warn after 10 times used
Displays the percentage used of the CPU allocated to alarm
virtual processes (VPs).

Collector: PDQMonitor
MemoryUsage Y con undef 0–10 95–100 set by coll graph percentage of
warn alarm memory used
Displays the percentage used of the memory allocated to
Decision Support.

Collector: PDQMonitor
ScanThreadUsage Y con undef 0–10 95–100 set by coll graph percentage of scan
warn alarm threads used
Displays the percentage used of the scan threads
allocated to Decision Support.

Collector: PDQMonitor
ScanThreadsAvailable Y con undef 1–50 undef set by coll bool none
warn
Displays the number of times the maximum number of
scan threads is less than the maximum number of
fragments found in any table in the instance.

Collector: PDQMonitor
IFMXDS_PERFORMANCE Application Class
CleanersDown Y con undef 50–65 65–100 set by coll gauge percentage of page
warn alarm cleaners down
Displays the percentage of page cleaners that are down
for the selected server.

Collector: Onstat_FMonitor

PATROL Parameter Reference Manual 279

PATROL Parameter Reference Manual 280

Table 12 PATROL for Informix 9.1.10 (Part 18 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DataDistribution Y std undef 30–55 55–100 3 min gauge percentage difference
warn alarm between most and
Displays the percentage of difference between the least least accessed chunk
accessed chunk and the most accessed chunk for the
selected server.
FgWrites Y con undef undef 1–100 set by coll graph number of
alarm foreground writes
Displays the number of foreground writes for the selected
server.

Collector: Onstat_FMonitor
IOQueue Y std undef 31–100 undef 14 min gauge maximum length of
alarm I/O queue
Displays the maximum length of the I/O queue for the
selected server.
LogicalLogBufSize Y con undef 40–60 undef set by coll gauge percentage of total
warn logical log buffer size
Displays the percentage of the total logical log buffer size pages used per I/O
pages used by each I/O for the selected server.

Collector: Onstat_IMonitor
PhysicalLogBufSize Y con undef 40–60 60–60 set by coll gauge percentage of total
5 times 5 times physical log buffer
Displays the percentage of the total physical log buffer warn alarm size pages used per
size pages used for each I/O for the selected server. I/O

Collector: Onstat_IMonitor
PhysicalLogUsed Y con undef undef undef set by coll graph number of pages

Displays the number of pages in the physical log that are

used for the selected server.

Collector: Onstat_IMonitor
Table 12 PATROL for Informix 9.1.10 (Part 19 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ReadAhead Y con undef 1–84 undef set by coll graph ratio of page reads to
warn pages used
Displays the ratio of page reads to pages used for the
selected server.

Collector: OnstatMonitor
ReadCache Y con undef 1–90 undef set by coll graph percentage of read
warn requests that were
Displays the percentage of read requests that were satisfied
satisfied from the memory buffers for the selected server.

Collector: OnstatMonitor
ReadyQueue Y std undef 10–100 undef 8 min graph maximum length for
warn ready queue
Displays the maximum length of the ready queue for the
selected server.
ResponseTime Y std 0–100 31–60 61–100 10 min graph sec
alarm warn alarm
Displays the response time in seconds for the selected
server.
SysCpu Y con undef undef undef set by coll gauge percentage of CPU
time used by threads
Displays the total CPU time used by all user threads on
the selected server.

Collector: OnstatMonitor
TabExtents Y std undef 8–15 16–100 5 min graph number of table
warn alarm extents
Displays the number of table extents for each active table
on the selected server.

PATROL Parameter Reference Manual 281

PATROL Parameter Reference Manual 282

Table 12 PATROL for Informix 9.1.10 (Part 20 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TableScans Y con undef undef undef set by coll graph number of table
sequential scans
Displays the total number of table sequential scans on the
selected server.

Collector: OnstatMonitor
TblDeadLocks Y con undef 5–20 21–100 set by coll graph number of table
warn alarm deadlocks
Displays the total number of table dead locks for the
selected server.

Collector: TblMonitor
TblLockWaits Y con undef 10–30 31–100 set by coll graph number of table lock
warn alarm waits
Displays the total number of table lock waits for the
selected server.

Collector: TblMonitor
TblSeqScans Y con undef 20–50 51–100 set by coll graph sequential scans per
warn alarm active table
Displays the number of sequential scans for each active
table on the selected server.

Collector: TblMonitor
UserCpu Y con undef undef undef set by coll gauge percentage of total
CPU usage by all
Displays the percentage of total CPU usage by all user user threads
threads for the selected server.

Collector: OnstatMonitor
Table 12 PATROL for Informix 9.1.10 (Part 21 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
WriteCache Y con undef 1–80 undef set by coll graph percentage of write
warn requests that were
Displays the percentage of write requests that were satisfied
satisfied from memory buffers for the selected server.

Collector: OnstatMonitor
IFMXDS_TBS Application Class
TBSDeadLks Y con undef undef undef set by coll graph number of deadlocks
per partition
Displays the number of dead locks for each of the
monitored tblspaces (partitions) for the selected server.

Collector: TBSMonitor
TBSDeletes Y con undef undef undef set by coll graph number of deletes
per partition
Displays the number of deletes for each of the monitored
tblspaces (partitions) for the selected server.

Collector: TBSMonitor
TBSLockReqs Y con undef undef undef set by coll graph number of lock
requests per partition
Displays the number of lock requests for each of the
monitored tblspaces (partitions) for the selected server.

Collector: TBSMonitor
TBSLockWts Y con undef undef undef set by coll graph number of lock waits
per partition
Displays the number of lock waits for each of the
monitored tblspaces (partitions) for the selected server.

Collector: TBSMonitor

PATROL Parameter Reference Manual 283

PATROL Parameter Reference Manual 284

Table 12 PATROL for Informix 9.1.10 (Part 22 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TBSPageReads Y con undef undef undef set by coll graph number of page reads
per partition
Displays the number of page reads for each of the
monitored tblspaces (partitions) for the selected server.

Collector: TBSMonitor
TBSPageWrites Y con undef undef undef set by coll graph number of page
writes per partition
Displays the number of page writes for each of the
monitored tblspaces (partitions) for the selected server.

Collector: TBSMonitor
TBSSeqScans Y con undef undef undef set by coll graph number of sequential
scans per partition
Displays the number of sequential scans for each of the
monitored tblspaces (partitions) for the selected server.

Collector: TBSMonitor
IFMXDS_USER Application Class
UserCurrLogspace Y con undef undef undef set by coll graph percent of used log
space
Displays the amount of log space used by the current
transaction in this user session since the last polling cycle.

Collector: UserMonitor
UserDeadLocks Y con undef undef undef set by coll graph number of deadlocks

Displays the number of times a deadlock was detected in

this user session since the last polling cycle.

Collector: UserMonitor
Table 12 PATROL for Informix 9.1.10 (Part 23 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UserDiskSorts Y con undef undef undef set by coll graph number of sorts

Displays the number of sorts performed on disk instead

of in memory by this user session since the last polling
cycle

Collector: UserMonitor
UserLocksHeld Y con undef undef undef set by coll graph number of locks held

Displays the number of locks held by this user session

since the last polling cycle.

Collector: UserMonitor
UserLockTimeouts Y con undef undef undef set by coll graph number of dead lock
timeouts
Displays the number of dead lock timeouts that occurred
in this user session since the last polling cycle.

Collector: UserMonitor
UserLogRecords Y con undef undef undef set by coll graph number of log
records written
Displays the number of log records written in this user
session since the last polling cycle.

Collector: UserMonitor
UserLongTrans Y con undef undef undef set by coll graph number of long
transactions
Displays the number of long transactions that occurred in
this session since the last polling cycle.

Collector: UserMonitor

PATROL Parameter Reference Manual 285

PATROL Parameter Reference Manual 286

Table 12 PATROL for Informix 9.1.10 (Part 24 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UserMaxLogSpace Y con undef undef undef set by coll graph percentage of log
space used
Displays the percentage of the total log space that was
used by any one transaction in this user session since the
last polling cycle.

Collector: UserMonitor
UserMaxResourceWait Y con undef undef undef set by coll graph sec

Displays the maximum amount of time this user session

had to wait for resources since the last polling cycle.

Collector: UserMonitor
UserPageReads Y con undef undef undef set by coll graph number of page reads

Displays the number of page reads that occurred in this

user session since the last polling cycle.

Collector: UserMonitor
UserPageWrites Y con undef undef undef set by coll graph number of page
writes
Displays the number of page writes that occurred in this
user session since the last polling cycle.

Collector: UserMonitor
UserSeqScans Y con undef undef undef set by coll graph number of sequential
scans
Displays the number of sequential scans that occurred in
this user session since the last polling cycle.

Collector: UserMonitor
Table 12 PATROL for Informix 9.1.10 (Part 25 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IFMXDS_USERS Application Class
LicensesUsed Y con undef 75–90 90–100 set by coll graph percentage of licenses
warn alarm in use
Displays the percentage of the total number of licenses
available that are currently in use for user sessions,
according to onstat –u.

Collector: SesMonitor
ProblemSessions Y con undef 75–90 90–100 set by coll graph percentage of active
warn alarm sessions for users
Displays the percentage of the total active sessions that
belong to users.

Collector: SesMonitor
ProblemUsers Y con undef 75–90 90–100 set by coll graph percentage of I/O for
warn alarm users
Displays the percentage of the total I/O that is
attributable to users.

Collector: SesMonitor
SesDeadlocks Y con 0–100 1–14 15–100 set by coll graph number of deadlocks
alarm warn alarm
Displays the number of user session dead locks for the
selected server.

Collector: SesMonitor
SesDeletes Y con 0–100 50–99 undef set by coll graph number of deletes
alarm warn
Displays the number of user sessions deletes for the
selected server.

Collector: SesMonitor

PATROL Parameter Reference Manual 287

PATROL Parameter Reference Manual 288

Table 12 PATROL for Informix 9.1.10 (Part 26 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SesHeldResources Y con undef 6–9 10–100 set by coll graph sec
warn alarm
Displays the longest amount of time a user session waited
for a resource for the selected server.

Collector: SesMonitor
SesLocksHeld Y con 0–100 50–99 undef set by coll graph number of locks held
warn
Displays the number of locks held for user sessions for
the selected server.

Collector: SesMonitor
SesLongTxs Y con undef 2–4 5–100 set by coll graph number of long
warn alarm transactions
Displays the number of long transactions caused by user
sessions for the selected server.

Collector: SesMonitor
SesSeqScans Y con undef 10–30 31–100 set by coll graph number or sequential
warn alarm scans
Displays the number of sequential scans for user sessions
for the selected server.

Collector: SesMonitor
INFORMIX Application Class
InstanceStatusMonitor Y coll undef undef undef 1 min none none

Gathers information on the status changes for the

Informix IDS and XPO servers by using the results from
onstat. This parameter does not appear as an icon..
Table 12 PATROL for Informix 9.1.10 (Part 27 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Extended Parallel Option (XPO) Component 9.1.00
IFMXPO_AVAILABILITY Application Class
CheckpointTime Y con undef undef undef set by coll graph check point interval
in sec
Displays the average check point interval for
“Checkpoint completed” messages written to the
Informix error log, as defined by the MSGPATH
configuration path.

Collector: ErrorLogMonitor
ChunkDown Y con undef undef undef set by coll text none

Displays information on the chunks that are down.

Collector: Onstat_dMonitor
EventSeverity Y con undef 3 4–5 set by coll graph severity level
warn alarm (3, 4, or 5)
Captures and displays the severity rating for each event
reported to the message log, and annotates the events that
are given a severity level of 3, 4, or 5 with the error
message.

Collector: ErrorLogMonitor
FullestChunk Y con undef 70–89 90–100 set by coll gauge percentage full for
warn alarm the fullest chunk
Displays the percent full for the fullest chunk on the
server.

Collector: Onstat_dMonitor
FullestDbs Y con undef 80–89 90–100 set by coll gauge percentage full for
warn alarm fullest dbspace
Displays the percent full for the fullest dbspace on the
server.

Collector: Onstat_dMonitor

PATROL Parameter Reference Manual 289

PATROL Parameter Reference Manual 290

Table 12 PATROL for Informix 9.1.10 (Part 28 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
InstanceStatus Y con undef 1–1 2–2 set by coll bool none
warn alarm
If Instance Always On Line was selected when the
instance was configured, and the instance goes down
without good cause or it is placed in Quiescent Mode,
then this parameter goes into an alarm state.

If Instance Always On Line was NOT selected, then this

parameter does not go into an alarm state when the
server goes off line, no matter the cause.

Collector: InstanceStatusMonitor
LogSpace Y std undef 60–79 80–100 5 min gauge percentage of total
warn alarm logical space used
Displays the percentage of the total logical log space that
is used for the server.

Collector: Onstat_dMonitor
UsedSpace Y con undef 80–89 90–100 set by coll graph percentage of total
warn alarm space used per
Displays the percentage of total space used for each dbspace
dbspace on the server.

Collector: Onstat_dMonitor
VPList Y con undef undef undef set by coll text none

Displays a list of virtual processors for the server.

Collector: VPMonitor
VPTotal Y con undef undef undef set by coll graph number of processors

Displays the total number of virtual processors on the

server.

Collector: VPMonitor
Table 12 PATROL for Informix 9.1.10 (Part 29 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IFMXPO_CAPACITY Application Class
ActiveLocks Y con undef 90–95 95–100 set by coll gauge number of active
warn alarm locks
Displays the number of total locks that are active.

Collector: OnstatMonitor
BufferOverflow Y con undef 5–100 undef set by coll graph number of attempts
warn
Displays the number of attempts made to exceed the
shared memory buffer limit (buffer overflows) for the
server.

Collector: OnstatMonitor
BufferWaits Y con undef 40–60 61–100 set by coll graph number of buffer
warn alarm waits
Displays the number of buffer waits for the selected
server.

Collector: OnstatMonitor
CheckpointWaits Y con undef 60–100 undef set by coll graph number of check
warn point waits
Displays the number of check point waits for the selected
server.

Collector: OnstatMonitor
Deadlock_Timeout Y con undef 1–50 51–100 set by coll graph number of dead lock
warn alarm time outs
Displays the number of times that a dead lock time out
value was exceeded for the selected server.

Collector: OnstatMonitor

PATROL Parameter Reference Manual 291

PATROL Parameter Reference Manual 292

Table 12 PATROL for Informix 9.1.10 (Part 30 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Deadlocks Y con undef 10–50 51–100 set by coll graph number of potential
warn alarm dead locks
Displays the number of potential dead locks that were
detected and prevented for the selected server.

Collector: OnstatMonitor
LatchWaits Y con undef undef 51–100 set by coll graph number of thread
alarm waits
Displays the number of times a thread waits to access
shared memory for the selected server.

Collector: OnstatMonitor
LockOverflow Y con undef 5–25 26–100 set by coll graph number of attempts
warn alarm
Displays the number of times an attempt was made to
exceed the locks limit for the selected server.

Collector: OnstatMonitor
LockWaits Y con undef 10–20 21–100 set by coll gauge number of thread
warn alarm waits
Displays the number of times a thread waits for a lock for
the selected server.

Collector: OnstatMonitor
PhysicalLogSize Y con undef 1–40 undef set by coll gauge number of pages
warn
Displays the size of the physical log buffers for the
selected server.

Collector: Onstat_IMonitor
Table 12 PATROL for Informix 9.1.10 (Part 31 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TableOverflow Y con undef 1–5 5–100 set by coll graph number of attempts
warn alarm
Displays the number of attempts to exceed the table space
(tblspace) limits for the selected server.

Collector: OnstatMonitor
UserOverflow Y con undef 1–5 6–100 set by coll graph number of attempts
warn alarm
Displays the total number of attempts to exceed the user
limit on the selected server.

Collector: OnstatMonitor
IFMXPO_COLLECTORS Application Class
CollectorStatus Y con undef undef undef set by coll text none

Displays error messages produced by any of the collector

or standard parameters that issue collection commands.
DBSpaceMonitor Y std undef 1–50 undef 15 min bool none
alarm
Monitors the Informix dbspaces and chunks for each
coserver and then reports the space used versus the space
allocated for each dbspace and the reads, the writes, the
page reads, and the page writes for each chunk.
ErrorLogMonitor Y std undef 1–50 undef 1 min bool none
alarm
Monitors the Informix XPO or XPS error log, as defined
by the MSGPATH configuration parameter, and records
the diagnostic and status messages.

PATROL Parameter Reference Manual 293

PATROL Parameter Reference Manual 294

Table 12 PATROL for Informix 9.1.10 (Part 32 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FragChecker Y std undef 1–50 undef 12 hr bool none

Monitors the number of fragments for each monitored

table and determines whether the number of fragments
for a table exceeds the user-defined threshold set using
the Set Fragment hreshholdmenu command. If the
number exceeds the threshold, the the IFMXPO_FRAG
instances created for those fragments are deleted and
replaced by IFMXPO_FRAG_SUM instances.
FragMonitor Y std undef 1–50 undef 20 min bool none
alarm
This parameter is not available for INFORMIX-OnLine
XPS 8.11.

Monitors for each coserver the Informix logically

fragmented tables listed by the FragChecker parameter.
Creates and destroys the Frag and Frag_Ext instances.
Onstat_dMonitor Y std undef 1–50 undef 18 min bool none
alarm
Uses the onstat -d utility to monitor the chunks and
dbspaces for each coserver.
Onstat_FMonitor Y std undef 1–50 undef 8 min bool none
alarm
Uses the onstat -F utility to monitor the INFORMIX-
Online XPS 8.11 or 8.21 page cleaners and foreground
writes for each coserver.
Onstat_IMonitor Y std undef 1–50 undef 2 min bool none
alarm
Uses the onstat -l utility to monitor the INFORMIX-
Online XPS 8.11 or 8.21 for information on the physical
and logical logs.
OnstatMonitor Y std undef 1–50 undef 5 min bool none
alarm
Uses the onstat -p utility to monitor the INFORMIX-
Online XPS 8.11 or 8.21 profile counts.
Table 12 PATROL for Informix 9.1.10 (Part 33 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SesMonitor Y std undef 1–50 undef 2 min bool none
alarm
Monitors the INFORMIX-Online XPS 8.11 or 8.21 active
user sessions on each coserver.
SQLViewerMonitor Y std undef 1–50 undef 1 min bool none
alarm
Captures the SQL statements that are processed by the
Informix database engines and writes them to a flat file of
the user’s choosing. The SQLViewerMonitor parameter
does not display the sql statements directly; you can view
the sql statements through the SQL Viewer menu
selections.
TblMonitor Y std undef 1–50 undef 4 min bolo none
alarm
This parameter is not available for INFORMIX-OnLine
XPS 8.11.

Monitors the active tables in sysptprof for each coserver.

TBSMonitor Y std undef 1–50 undef 6 min bool none
alarm
This parameter is not available for INFORMIX-OnLine
XPS 8.11.

Monitors the active tables by specified table or criteria.

PATROL Parameter Reference Manual 295

PATROL Parameter Reference Manual 296

Table 12 PATROL for Informix 9.1.10 (Part 34 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TempDBSMonitor Y std undef 1–50 undef 4 min bool none
alarm
Monitors the INFORMIX-Online XPS 8.11 or 8.21
dbspaces and chunks as defined in the ONCONFIG file
parameter DBSPACETEMP, reports the space used
versus the space allocated for each dbspace, and reports
the reads, writes, page reads, and page writes for each
chunk.

It does not report on temp dbspaces if the value for

DBSPACETEMP in the ONCONFIG file is set to ALL or
NOTCRITICAL.
UserMonitor Y std undef 1–50 undef 1 min bool none
alarm
Monitors the Informix XPS or XPO active user sessions by
specified user, criteria, or session ID for each coserver and
creates the instances found under the IFMXPO_USER
application.
VPMonitor Y std undef 1–50 undef 1 min bool none
alarm
Monitors the INFORMIX-Online XPS 8.11 or 8.21 virtual
processors on each coserver.
IFMXPO_CORRELATORS Application Class
CoserverCorrelator Y std undef 1–50 undef 1 min graph 0 or 1 (matches or
warn does not match the
Compares the coserver instances with the coserver number of coserver
definitions in the ONCONFIG file and if they do not definitions)
match, the value in the graph is set to 1, which triggers a
warning alarm.
Table 12 PATROL for Informix 9.1.10 (Part 35 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DbsAllocCorrelator Y std undef 10–100 undef 5 min graph percentage of
warn difference
Monitors the distribution of allocated dbspaces in
dbslices across coservers. This parameter calculates and
displays the percentage of difference between the lowest
amount of dbspace allocated by a coserver and the
highest amount of dbspace allocated by a coserver.
DbsUsedCorrelator Y std undef 10–100 undef 5 min graph percentage of
warn difference
Monitors the distribution of used dbspaces in dbslices
across the coservers. This parameter calculates and
displays the percentage of difference between the three
lowest amounts of dbspace used by a coserver and the
highest amount of dbspace used by a coserver.
VPCorrelator Y std undef 1–50 undef 1 min graph 0 or 1
warn
Compares the number of virtual processors (vps) on the
root node (coserver.1) with the number of vps on each
coserver node. If any node has more or fewer vps than the
root node, the value in the graph is set to 1, which triggers
a warning.
IFMXPO_DBS Application Class
DBSpaceAllocated Y con 0–100 80–89 90–100 set by coll gauge percentage of space
alarm warn alarm allocated in each
Displays the percentage of total space in each dbspace dbspace
that is allocated for each coserver.

Collector: DBSpaceMonitor
DBSpaceUsed Y con 0–100 80–89 90–100 set by coll gauge percentage of total
alarm warn alarm space used on each
Displays the percentage of total space on each dbspace dbspace
that was used for each coserver.

Collector: DBSpaceMonitor

PATROL Parameter Reference Manual 297

PATROL Parameter Reference Manual 298

Table 12 PATROL for Informix 9.1.10 (Part 36 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IFMXPO_DBS_CHK Application Class
PageRead Y con undef undef undef set by coll graph number of page reads
per chunk
Displays the number of page reads for each chunk for the
selected server.

Collector: DBSpaceMonitor
PageWrite Y con undef undef undef set by coll graph number of page
writes per chunk
Displays the number of page writes for each chunk for
the selected server.

Collector: DBSpaceMonitor
Read Y con undef undef undef set by coll graph number of reads per
chunk
Displays the number of reads for each chunk for the
selected server.

Collector: DBSpaceMonitor
Write Y con undef undef undef set by coll graph number of writes per
chunk
Displays the number of writes for each chunk for the
selected server.

Collector: DBSpaceMonitor
IFMXPO_DBSTEMP Application Class
TempDBSpaceAllocated Y con 0–100 80–89 90–100 set by coll gauge percentage of space
alarm warn alarm that is allocated
Displays the percentage of total space in each temporary
dbspace that is allocated for the selected server.

Collector: TempDBSMonitor
Table 12 PATROL for Informix 9.1.10 (Part 37 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TempDBSpaceUsed Y con 0–100 80–89 90–100 set by coll gauge percentage of space
alarm warn alarm that is used
Displays the percentage of total space on each temporary
dbspace that was used.

Collector: TempDBSMonitor
IFMXPO_DBSTEMP_CHK Application Class
TempPageRead Y con undef undef undef set by coll graph number of page reads
per chunk
Displays the number of page reads for each chunk for the
selected server.

Collector: TempDBSMonitor
TempPageWrite Y con undef undef undef set by coll graph number of page
writes per chunk
Displays the number of page writes for each chunk for
the selected server.

Collector: TempDBSMonitor
TempRead Y con undef undef undef set by coll graph number of reads per
chunk
Displays the number of reads for each chunk for the
selected server.

Collector: TempDBSMonitor
TempWrite Y con undef undef undef set by coll graph number of writes per
chunk
Displays the number of writes for each chunk for the
selected server.

Collector: TempDBSMonitor

PATROL Parameter Reference Manual 299

PATROL Parameter Reference Manual 300

Table 12 PATROL for Informix 9.1.10 (Part 38 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IFMXPO_FRAG_EXT Application Class
FragDeadLks Y con undef undef undef set by coll graph number of deadlocks
per partition
Displays the number of deadlocks for each of the logically
fragmented tblspaces (partitions) for the selected server.

Collector: FragMonitor
FragDeletes Y con undef undef undef set by coll graph number of deletes
per partition
Displays the number of deletes for each of the logically
fragmented tblspaces (partitions) for the selected server.

Collector: FragMonitor
FragLockReqs Y con undef undef undef set by coll graph number of lock
requests per partition
Displays the number of lock requests for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor
FragLockWts Y con undef undef undef set by coll graph number of lock waits
per partition
Displays the number of lock waits for each of the logically
fragmented tblspaces (partitions) for the selected server.

Collector: FragMonitor
FragPageReads Y con undef undef undef set by coll graph number of reads per
partition
Displays the number of page reads for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor
Table 12 PATROL for Informix 9.1.10 (Part 39 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FragPageWrites Y con undef undef undef set by coll graph number of writes per
partition
Displays the number of page writes for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor
FragSeqScans Y con undef undef undef set by coll graph number of sequential
scans per partition
Displays the number of sequential scans for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor
IFMXPO_FRAG_SUM Application Class
FragSDeadLocks Y con undef undef undef set by coll graph number of deadlocks
per partition
Displays the number of deadlocks for each of the logically
fragmented tblspaces (partitions) for the selected server.

Collector: FragMonitor
FragSDeletes Y con undef undef undef set by coll graph number of deletes
per partition
Displays the number of deletes for each of the logically
fragmented tblspaces (partitions) for the selected server.

Collector: FragMonitor
FragSLockRequests Y con undef undef undef set by coll graph number of lock
requests per partition
Displays the number of lock requests for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor

PATROL Parameter Reference Manual 301

PATROL Parameter Reference Manual 302

Table 12 PATROL for Informix 9.1.10 (Part 40 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FragSLockWaits Y con undef undef undef set by coll graph number of lock waits
per partition
Displays the number of lock waits for each of the logically
fragmented tblspaces (partitions) for the selected server.

Collector: FragMonitor
FragSPageReads Y con undef undef undef set by coll graph number of reads per
partition
Displays the number of page reads for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor
FragSPageWrites Y con undef undef undef set by coll graph number of writes per
partition
Displays the number of page writes for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor
FragSSeqScans Y con undef undef undef set by coll graph number of sequential
scans per partition
Displays the number of sequential scans for each of the
logically fragmented tblspaces (partitions) for the selected
server.

Collector: FragMonitor
IFMXPO_PERFORMANCE Application Class
CleanersDown Y con undef 50–65 66–100 set by coll gauge percentage of page
warn alarm cleaners down
Displays the percentage of page cleaners that are down
for the selected server.

Collector: Onstat_FMonitor
Table 12 PATROL for Informix 9.1.10 (Part 41 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DataDistribution Y std undef 30–55 56–100 3 min gauge percentage difference
warn alarm between most and
Displays the percentage of difference between the least least accessed chunk
accessed chunk and the most accessed chunk for the
selected server.
FgWrites Y con undef 1–5 6–100 set by coll graph number of
warn alarm foreground writes
Displays the number of foreground writes for the selected
server.

Collector: Onstat_FMonitor
IOQueue Y std undef 31–100 undef 14 min gauge maximum length of
alarm I/O queue
Displays the maximum length of the Informix XPO or
XPS I/O queue.
LogicalLogBufSize Y con undef 40–60 undef set by coll gauge percentage of total
warn logical log buffer size
Displays the percentage of the total logical log buffer size pages used per I/O
pages used by each I/O for the selected server.

Collector: Onstat_IMonitor
PhysicalLogBufSize Y con undef 40–60 1–39 set by coll gauge percentage of total
warn alarm physical log buffer
Displays the percentage of the total physical log buffer size pages used per
size pages used for each I/O for the selected server. I/O

Collector: Onstat_IMonitor
PhysicalLogUsed Y con undef undef undef set by coll graph number of pages

Displays the number of pages in the physical log that are

used for the selected server.

Collector: Onstat_IMonitor

PATROL Parameter Reference Manual 303

PATROL Parameter Reference Manual 304

Table 12 PATROL for Informix 9.1.10 (Part 42 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ReadAhead Y con undef 1–84 undef set by coll graph ratio of page reads to
warn pages used
Displays the ratio of page reads to pages used for the
selected server.

Collector: OnstatMonitor
ReadCache Y con undef 1–90 undef set by coll graph percentage of read
warn requests that were
Displays the percentage of read requests that were satisfied
satisfied from the memory buffers for the selected server.

Collector: OnstatMonitor
ReadyQueue Y std undef 10–100 undef 8 min graph maximum length for
warn ready queue
Displays the maximum length of the ready queue for the
selected server.
ResponseTime Y std undef undef undef 10 min graph sec

Displays the response time in seconds for the selected

server.
SysCpu Y con undef undef undef set by coll gauge percentage of CPU
time used by threads
Displays the total CPU time used by all user threads on
the selected server.

Collector: OnstatMonitor
TabExtents Y std undef 8–15 16–100 5 min graph number of table
warn alarm extents
Displays the number of table extents for each active table
on the selected server.
Table 12 PATROL for Informix 9.1.10 (Part 43 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TableScans Y con undef undef undef set by coll graph number of table
sequential scans
Displays the total number of table sequential scans on the
selected server.

Collector: OnstatMonitor
TblDeadLocks Y con undef 5–20 21–100 set by coll graph number of table
warn alarm deadlocks
Displays the total number of table dead locks for the
selected server.

Collector: TblMonitor
TblLockWaits Y con undef 10–30 31–100 set by coll graph number of waits
warn alarm
Displays the total number of table lock waits.

Collector: TblMonitor
TblSeqScans Y con undef 20–50 51–100 set by coll graph number of sequential
warn alarm scans per active table
Displays the number of sequential scans for each active
table on the selected server.

Collector: TblMonitor
UserCpu Y con undef undef undef set by coll gauge percentage of total
CPU usage by all
Displays the percentage of total CPU usage by all user user threads
threads for the selected server.

Collector: OnstatMonitor
WriteCache Y con undef 1–80 undef set by coll graph percentage of write
warn requests that were
Displays the percentage of write requests that were satisfied
satisfied from memory buffers for the selected server.

Collector: OnstatMonitor

PATROL Parameter Reference Manual 305

PATROL Parameter Reference Manual 306

Table 12 PATROL for Informix 9.1.10 (Part 44 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IFMXPO_TBS Application Class
TBSDeadLks Y con undef undef undef set by coll graph number of deadlocks
per partition
Displays the number of dead locks for each of the
monitored tblspaces (partitions) for the selected server.

Collector: TBSMonitor
TBSDeletes Y con undef undef undef set by coll graph number of deletes
per partition
Displays the number of deletes for each of the monitored
tblspaces (partitions) for the selected server.

Collector: TBSMonitor
TBSLockReqs Y con undef undef undef set by coll graph number of lock
requests per partition
Displays the number of lock requests for each of the
monitored tblspaces (partitions) for the selected server.

Collector: TBSMonitor
TBSLockWts Y con undef undef undef set by coll graph number of lock waits
per partition
Displays the number of lock waits for each of the
monitored tblspaces (partitions) for the selected server.

Collector: TBSMonitor
TBSPageReads Y con undef undef undef set by coll graph number of page reads
per partition
Displays the number of page reads for each of the
monitored tblspaces (partitions) for the selected server.

Collector: TBSMonitor
Table 12 PATROL for Informix 9.1.10 (Part 45 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TBSSeqScans Y con undef undef undef set by coll graph number of sequential
scans per partition
Displays the number of sequential scans for each of the
monitored tblspaces (partitions) for the selected server.

Collector: TBSMonitor
IFMXPO_USERS Application Class
SesDeadlocks Y con 0–100 1–14 15–100 set by coll graph number of deadlocks
alarm warn alarm
Displays the number of user session dead locks for the
selected server.

Collector: SesMonitor
SesDeletes Y con 0–100 50–99 undef set by coll graph number of deletes
alarm warn
Displays the number of user sessions deletes for the
selected server.

Collector: SesMonitor
SesHeldResources Y con undef 6–9 10–100 set by coll graph sec
warn alarm
Displays the longest amount of time a user session waited
for a resource for the selected server.

Collector: SesMonitor
SesLocksHeld Y con 0–100 50–99 undef set by coll graph number of locks held
warn
Displays the number of locks held for user sessions for
the selected server.

Collector: SesMonitor

PATROL Parameter Reference Manual 307

PATROL Parameter Reference Manual 308

Table 12 PATROL for Informix 9.1.10 (Part 46 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SesLongTxs Y con undef 2–4 5–100 set by coll graph number of long
warn alarm transactions
Displays the number of long transactions caused by user
sessions for the selected server.

Collector: SesMonitor
SesSeqScans Y con undef 10–30 31–100 set by coll graph number or sequential
warn alarm scans
Displays the number of sequential scans for user sessions
for the selected server.

Collector: SesMonitor
Enterprise Replication (ER) Component 9.1.00
IFMXER Application Class
ERATSSpace Y con undef 80–95 95–100 set by coll graph percentage used
warn alarm
Monitors the space in the file system where the aborted
transaction spooling (ATS) files are located.

Collector: ERSpoolMonitor
ERATSSpool Y con undef 1–100 undef set by coll graph number of files
alarm
Monitors the aborted transaction spooling (ATS)
directory and issues an alarm if one or more aborted
transaction files are created.

Collector: ERSpoolMonitor
ERConnectState Y con undef 1 2–50 set by coll bool none
warn alarm
Monitors the state of the connection for the server.

Collector: ERServerMonitor
Table 12 PATROL for Informix 9.1.10 (Part 47 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ERError Y con undef 1–100 undef set by coll graph number of errors
alarm
Monitors the number of errors that have occurred since
the last polling cycle.

Collector: ERErrorMonitor
ERReceiveQueue Y con undef 80–95 95–100 set by coll graph percentage of used
warn alarm dbspace
Monitors the percentage of dbspace used by the receive
queue.

Collector: ERQueueMonitor
ERRISSpace Y con undef 80–95 95–100 set by coll graph percentage full
warn alarm
Monitors the space in the file system where the row
information spooling (RIS) files are located.

Collector: ERSpoolMonitor
ERRISSpool Y con undef 1–100 undef set by coll graph number of files
alarm
Monitors the row information spooling (RIS) directory
and goes into an alarm state if one or more files are sent to
the directory.

Collector: ERSpoolMonitor
ERSendQueue Y con undef 80–95 95–100 set by coll graph percentage used
warn alarm
Monitors the percentage of dbspace used by the send
queue.

Collector: ERQueueMonitor

PATROL Parameter Reference Manual 309

PATROL Parameter Reference Manual 310

Table 12 PATROL for Informix 9.1.10 (Part 48 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ERServerState Y con undef 1–50 undef set by coll bool none
alarm
Monitors the state of the replicate server.

Collector: ERServerMonitor
IFMXER_COLLECTORS Application Class
ERErrorMonitor Y std undef 1–100 undef 2 min bool none
warn
Collects data from the error log and sends the data on
new errors to the ERError consumer parameter.
ERQueueMonitor Y std undef 1–100 undef 25 min bool none
warn
Monitors the status of the receive queue and the send
queue. Collects data on how the send and receive queues
are utilizing dbspace and sends the data to the
ERSendQueue and ERReceiveQueue consumer
parameters. Also creates the IFMXER_QUEUE
application instances.
ERReplicateMonitor Y std undef 1–100 undef 10 min bool none
warn
Collects data on all of the replicates you have defined and
creates the IFMXER_Replicate, the IFMXER_Participant,
and the IFMXER_REPLGRP application instances,
populates the IFMXER_Replicate, the
IFMXER_Participant, and the IFMXER_REPLGRP
application InfoBoxes, and provides the data for the
report on Replicates.
ERServerMonitor Y std undef 1–100 undef 10 min bool none
warn
Collects data on the servers defined in the PATROL KM
for Informix ER and sends the data to the
ERConnectState and ERServerState consumer
parameters. Also creates the IFMXER_SERVERGRP
instances.
Table 12 PATROL for Informix 9.1.10 (Part 49 of 49)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ERSpoolMonitor Y std undef 1–100 undef 2 min bool none
warn
Monitors the aborted-transaction spooling (ATS) and the
row-information spooling (RIS) processes and the ATS
and RIS spooling file directories.
ERThreadMonitor Y std undef 1–100 undef 20 min bool none
warn
Monitors the status of all of the threads related to the
enterprise replication process.

PATROL Parameter Reference Manual 311

PATROL Parameter Reference Manual 312
PATROL Integration for DashBoard 1.2.00

Table 13 PATROL Integration for DashBoard 1.2.00 (Part 1 of 5)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm 1

Alarm 2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
DASH_host Application Class

(You can only customize the Reachability parameter in this application class in PATROL. You must change all other values in the PATROL DashBoard product.)
Drops Y con undef undef undef set by coll graph percentage of
dropped packets
Indicates the overall percent of dropped packets for the
device.

Collector: Status (DASH_host)

CPU_load Y con undef undef undef set by coll graph percentage of the
CPU being used
Indicates the percentage of the CPU being used by that
monitored device.

Collector: Status (DASH_host)

Memory_Usage Y con undef undef undef set by coll graph percentage of
memory being used
Indicates the memory usage for the currently monitored
device.

Collector: Status (DASH_host)

Reachability Y std 0–0 1–1 N/A 300 sec bool NA
alarm
Indicates whether the device is accessible from the
computer where PATROL Integration for DashBoard is
processing.

Collector: Status (DASH_host)

PATROL Parameter Reference Manual 313

PATROL Parameter Reference Manual 314

Table 13 PATROL Integration for DashBoard 1.2.00 (Part 2 of 5)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm 1

Alarm 2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
Server_CPU_Load Y con undef undef undef set by coll graph percentage of the
memory being used
Indicates the percentage of the CPU being used by a
monitored server.

Collector: Status (Dash_host)

Status Y std undef undef undef 600 sec bool NA

Reports the status of communication with DashBoard

and collects data form DashBoard. Uses gathered data to
set the values for all the other parameters in the
DASH_host and DASH_interface application classes.
Unavailability Y con undef undef undef set by coll graph percentage of down
time
Reports the percentage of down time for each discovered
device. The percentage is determined only for those
devices that are active, or those that are supposed to be
monitored. For all of the devices that are active,
Unavailability is defined as a relative portion of cases
where there was no communication from all the
monitored devices.

Collector: Status (Dash_host)

Workload Y con undef undef undef set by coll graph number of packets
per sec
Indicates the total number of packets per second that are
processed by the router or switch.

Collector: Status (Dash_host)

Table 13 PATROL Integration for DashBoard 1.2.00 (Part 3 of 5)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm 1

Alarm 2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
DASH_interface Application Class

(You can only customize the Non_Unicast_Proportion parameter in this application class in PATROL. You must change all other values in the PATROL DashBoard product.)
Drops Y con undef undef undef set by coll graph percentage of
dropped packets
Indicates the percent of dropped packets for the current
interface.

Collector: Status (Dash_host)

Collisions Y con undef undef undef set by coll graph number of collisions
per hour
Indicates the number of collisions per hour for an
interface. Not all interfaces allow for collisions, so some
instances of DASH_interface will not have this
parameter.

Collector: Status (Dash_host)

Errors Y con undef undef undef set by coll graph number of packet
errors per hour
Indicates the number of packet errors.

Collector: Status (Dash_host)

Input Y con undef undef undef set by coll graph Kb/sec

Indicates the speed of the input bit stream for the current
interface.

Collector: Status (Dash_host)

Non_Unicast Y con undef undef undef set by coll graph percentage of overall
non-unicast packets
Indicates the overall input and output non-unicast per hour
(multicast and braodcast) packet rate for each interface.

Collector: Status (Dash_host)

PATROL Parameter Reference Manual 315

PATROL Parameter Reference Manual 316

Table 13 PATROL Integration for DashBoard 1.2.00 (Part 4 of 5)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm 1

Alarm 2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
Non_Unicast_Proportion Y con N/A 1–1 2–2 set by coll graph NA
warn alarm
Indicates whether the percentage of all packets that are
multicast and broadcast is acceptable considering the
total traffic of the interface by applying the following
rules:

If the total traffic is less than the minimum network

utilization to apply thresholds, then the value of the
Non_Unicast_Proportion parameter is OK.

Otherwise:

–If the Non_Unicast parameter value is less than the

warning threshold, the status of the parameter is OK.

–If the Non_Unicast parameter value is greater than or

equal to the warning threshold, but less than the alarm
threshold, the status of the parameter is warning.

–If the Non_Unicast parameter value is greater than or

equal to the alarm threshold, the status of the parameter
is alarm.

Collector: Status (DASH_host)

Output Y con undef undef undef set by coll graph Kb/sec

Indicates the speed of the output bit stream for the

current interface.

Collector: Status (Dash_host)

Table 13 PATROL Integration for DashBoard 1.2.00 (Part 5 of 5)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm 1

Alarm 2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
Unavailability Y con undef undef undef set by coll graph percentage of down
time
Indicates the percentage of down time for each
discovered interface. The percentage is determined only
for those interfaces that are active, or those that are
supposed to be monitored. For all the interfaces that are
active, Unavailability is defined as a relative portion of
cases where there was no communication from all the
monitored interfaces. This percent is later joined with all
the other interface percentages to determine the
percentage of unavailability for each device.

Collector: Status (Dash_host)

DASH_server Application Class

(You cannot customize any parameters of PATROL Integration for DashBoard in PATROL. You must change the values in the DashBoard product.)
Status Y std undef undef undef 600 sec bool HTTP errors from
PATROL DashBoard
Reports on the status of communication with PATROL
DashBoard, collects data from PATROL DashBoard, and
creates all known host instances based on your selections
from the Edit Object Filter command.

PATROL Parameter Reference Manual 317

PATROL Parameter Reference Manual 318
PATROL Internet Server Manager 6.2.00

Table 14 PATROL Internet Server Manager 6.2.00 (Part 1 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
INET_Dns_Application Application Class
dnsCheckContent N con 0–100 0–100 100–100 NA text none
OK OK OK
Contains the text result of a DNS query.

Collector: dnsMonitor
dnsCheckContentStatus N con inactive by 1–1 2–2 set by coll stoplight 0 - OK,
default warn alarm 1 - warn,
Indicates whether the DNS query was answered 2 - alarm
successfully according to the content check definitions.

Collector: dnsMonitor
dnsCheckDownTime N con 0–1000 1–180 180–1000 NA graph sec

Indicates the amount of time in seconds the query has not

met the desired outcome.

Collector: dnsMonitor
dnsCheckResponseTime N con 0–100 0–100 100–100 NA graph msec
OK OK OK
Indicates the amount of time in milliseconds for the query
to complete with a successful response. If the query
returns an unexpected reply, this consumer parameter is
still populated. If there is no reply from the DNS server,
this parameter is not populated.

Collector: dnsMonitor

PATROL Parameter Reference Manual 319

PATROL Parameter Reference Manual 320

Table 14 PATROL Internet Server Manager 6.2.00 (Part 2 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
dnsCheckResponseTimeStdDev N con inactive by 2–3 3–10 set by coll graph number of standard
default warn alarm deviations
Standard deviation of response time for the DNS record
request. This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: dnsMonitor
dnsCheckStatus N con inactive by 1–1 2–2 set by coll stoplight 0 - OK,
default warn alarm 1 - warn,
Indicates the availability status of a specific DNS Query 2 - alarm
request.

Collector: dnsMonitor
INET_Dns_Domain Application Class
domainContent N con undef undef undef set by coll text none

Indicates the content of the domain record for the

monitored domain.

Collector: domainDaysLeft
domainContentStatus N con inactive by 1–1 2–2 set by coll stoplight 0 - OK,
default warn alarm 1 - warn,
Represents the success or failure of the content check 2 - alarm
operation on the domain record.

Collector: domainDaysLeft
Table 14 PATROL Internet Server Manager 6.2.00 (Part 3 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
domainDaysLeft N std undef 31–60 0–30 8 hr gauge min
warn alarm
Contains the number of days remaining until a registered
domain name expires with Internet naming authorities
(for example, InterNic).
In some cases, this parameter may not contain correct
information, usually because invalid results were
obtained from the domain registrar. Check the content of
whois queries to your registrar to verify results.
INET_Dns_Remote Application Class
remoteDnsDownTime Y con NA 1–180 180–1000 set by coll graph sec
warn alarm
Shows the downtime for a remote DNS service.

Collector: dnsMonitor
remoteDnsResponseTime Y con 0–100 0–100 100–100 set by coll graph msec
OK OK
Shows the response time for a remote DNS service.

Collector: dnsMonitor
remoteDnsResponseTimeStdDev N con inactive by 2–3 3–10 set by coll graph number of standard
default warn alarm deviations
Standard deviation of response time for the remote DNS
service. This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: dnsMonitor

PATROL Parameter Reference Manual 321

PATROL Parameter Reference Manual 322

Table 14 PATROL Internet Server Manager 6.2.00 (Part 4 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
remoteDnsStatus Y con inactive 1–1 2–2 set by coll graph 0 - OK,
warn alarm 1 - warn,
Shows the status for a remote DNS service. 2 - alarm

Collector: dnsMonitor
INET_Dns_Server Application Class
A_requestRate Y con 0–0 0–0 0–0 none graph requests per min
(inactive by (inactive by (inactive by
Displays the rate of Type A DNS requests. default) default) default)
This parameter is available only on Unix systems that are
Bind-variant DNS servers.

Collector: dnsStatsMonitor
ANY_requestRate Y con 0–0 0–0 0–0 set by coll graph requests per min
(inactive by (inactive by (inactive by
Shows the number of Any DNS requests per minute. default) default) default)
This parameter is available only on Unix systems that are
Bind-variant DNS servers.

Collector: dnsStatsMonitor
CNAME_requestRate Y con 0–0 0–0 0–0 set by coll graph requests per min
(inactive by (inactive by (inactive by
Shows the number of CNAME DNS requests per minute. default) default) default)

Collector: dnsStatsMonitor
configureLocal Y coll 0–0 0–0 0–0 120 sec graph none
(inactive by (inactive by (inactive by
Configures local server settings for a monitored DNS default) default) default)
server. These settings include the process monitoring
definitions, as well as commands for administering the
server.
Table 14 PATROL Internet Server Manager 6.2.00 (Part 5 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
dnsDownTime Y con 0–1000 0–180 180–1000 none graph sec
warn alarm
Shows the downtime for a DNS server or service.

Collector: dnsMonitor
dnsMonitor Y std 0–1 1–1 1–1 set by coll graph none
warn OK
Shows the status of a dnsMonitor operation. Any errors
are annotated on the dnsMonitor graph plot points.
dnsResponseTime Y con 0–0 0–0 0–0 set by coll graph msec
(inactive by warn alarm
Shows the response time, in milliseconds, for a DNS default) (inactive by (inactive by
request. default) default)

Collector: dnsMonitor
dnsResponseTimeStdDeviation N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Standard deviation of response time for the DNS server.
This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: dnsMonitor
dnsStatsMonitor Y std 0–1 1–1 1–1 300 sec none none
warn OK
Shows the status of the dnsStatsMonitor operation.
dnsStatus Y con 0–0 1–1 2–2 set by coll stoplight 0 - OK,
warn alarm 1 - warn,
Shows the status for this domain name service. 2 - alarm

Collector: dnsMonitor

PATROL Parameter Reference Manual 323

PATROL Parameter Reference Manual 324

Table 14 PATROL Internet Server Manager 6.2.00 (Part 6 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MX_requestRate Y con 0–0 0–0 0–0 set by coll graph requests per min
(inactive by warn alarm
Shows the number of MX DNS requests per minute. default) (inactive by (inactive by
This parameter is available only on Unix systems that are default) default)
Bind-variant DNS servers.

Collector: dnsStatsMonitor
processMonitor Y std 0–0 0–0 0–0 set by coll text none
(inactive by warn alarm
Records the description of the errors generated in default) (inactive by (inactive by
processMonitor. default) default)
PTR_requestRate Y con 0–0 0–0 0–0 set by coll graph requests per min
(inactive by warn alarm
Shows the rate of PTR DNS requests. default) (inactive by (inactive by
This parameter is available only on Unix systems that are default) default)
Bind-variant DNS servers.

Collector: dnsStatsMonitor
requestRate Y con 0–0 0–0 0–0 set by coll graph requests per min
(inactive by warn alarm
Indicates the number of requests per minute. default) (inactive by (inactive by
This parameter is available only on Unix systems that are default) default)
Bind-variant DNS servers.

Collector: dnsStatsMonitor
INET_Ftp_Server Application Class
configureLocal Y coll NA NA NA 120 sec text none

Configures local server settings for a monitored FTP

server. These settings include the process monitoring
definitions, as well as commands for administering the
server.
Table 14 PATROL Internet Server Manager 6.2.00 (Part 7 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ftpDownTime Y con 0–1000 1–180 180–1000 set by coll graph sec
warn alarm
Indicates the downtime for the FTP server.

Collector: ftpMonitor
ftpLoginStatus Y con NA NA NA set by coll stoplight none

Reports the login status from the FTP server.

Collector: ftpMonitor
ftpMonitor Y std 0–1 1–1 0–0 75 sec text none
alarm alarm OK
Performs client connections to an FTP server.
ftpResponseTime Y con 0–60 NA NA set by coll graph msec

Indicates the response time for the FTP request.

Collector: ftpMonitor
ftpResponseTimeStdDeviation N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Standard deviation of response time for the FTP server.
This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: ftpMonitor
ftpStatus Y con 0–100 1–1 2–2 set by coll stoplight 0 - OK,
OK warn alarm 1 - warn,
Indicates the connection status from the FTP server. 2 - alarm

Collector: ftpMonitorr

PATROL Parameter Reference Manual 325

PATROL Parameter Reference Manual 326

Table 14 PATROL Internet Server Manager 6.2.00 (Part 8 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ftpStatusCode Y con NA NA NA NA graph none

Indicates the connection status code from the FTP server.

Collector: ftpMonitor
processMonitor Y std NA NA NA 300 sec text none

Records process metrics for a monitored FTP server.

INET_Imap_Server Application Class
configureLocal Y coll NA NA NA 120 sec text none

Configures local server settings for a monitored IMAP

server. These settings include the process monitoring
definitions, as well as commands for administering the
server.
imapDownTime Y con 0–1000 1–180 180–1000 set by coll graph sec
warn alarm
Indicates the number of seconds of current down time for
the IMAP server.

Collector: imapMonitor
imapMonitor Y std NA NA NA 75 sec text none

Performs client connections to an IMAP server.

imapResponseTime Y con 0–60 0–0 0–0 none graph msec
(inactive by (inactive by (inactive by
Shows the response time for an IMAP request. default) default) default)

Collector: imapMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 9 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
imapResponseTimeStdDeviation N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Standard deviation of response time for the IMAP server.
This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: imapMonitor
imapStatus Y con 0–100 1–1 2–2 set by coll stoplight 0 - OK,
OK warn alarm 1 - warn,
Shows the connection status from the IMAP server. 2 - alarm

Collector: imapMonitor
processMonitor Y std NA NA NA 300 sec text none

Records process metrics for a monitored IMAP server.

INET_Ldap_Server Application Class
configureLocal Y coll NA NA NA 120 sec text none

Configures local server settings for a monitored LDAP

server. These settings include the process monitoring
definitions, as well as commands for administering the
server.
ldapDownTime Y con 0–1000 1–180 180–1000 set by coll graph sec
warn alarm
Indicates the downtime for the LDAP server.

Collector: ldapMonitor
ldapMonitor Y std 0–1 1–1 0–0 75 sec text none
alarm alarm OK
Performs client connections to an LDAP server.

PATROL Parameter Reference Manual 327

PATROL Parameter Reference Manual 328

Table 14 PATROL Internet Server Manager 6.2.00 (Part 10 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ldapResponseTime Y con 0–60 undef undef set by coll graph msec
(inactive by
Indicates the response time for an LDAP request. default)

Collector: ldapMonitor
ldapResponseTimeStdDeviation N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Standard deviation of response time for the LDAP server.
This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: ldapMonitor
ldapStatus Y con 0–100 1–1 2–2 set by coll stoplight 0 - OK,
OK warn alarm 1 - warn,
Indicates the connection status from the LDAP server. 2 - alarm

Collector: ldapMonitor
ldapStatusCode Y con undef undef undef NA graph none

Indicates the connection status code from the LDAP

server.

Collector: ldapMonitor
processMonitor Y std undef undef undef 300 sec text none

Records process metrics for a monitored LDAP server.

Table 14 PATROL Internet Server Manager 6.2.00 (Part 11 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
INET_Mail_Remote Application Class
deferredMsgs Y con 0–1 1–1 0–0 set by coll graph sec
(inactive by warn alarm
Shows the number of messages deferred to the mail hub default) (inactive by (inactive by
from a mail server. default) default)

Collector: mailQueueMonitor
INET_Mail_Server Application Class
activeMsgs Y con 0–0 0–0 0–0 set by coll graph number of messages
(inactive by warn alarm
Indicates the number of active messages in the mail default) (inactive by (inactive by
queue. default) default)

Collector: mailQueueMonitor
bytesInRate Y con 0–0 0–0 0–0 set by coll graph KB per min
(inactive by warn alarm
Indicates the rate of inbound messages in kilobytes per default) (inactive by (inactive by
minute. default) default)

Collector: mailStatsMonitor
bytesOutRate Y con 0–0 0–0 0–0 set by coll graph KB per min
(inactive by warn alarm
Indicates the rate of outbound messages in kilobytes per default) (inactive by (inactive by
minute. default) default)

Collector: mailStatsMonitor
configureLocal Y coll undef undef undef 120 sec text KB per min

Configures local server settings for a monitored mail

server. These settings include the process monitoring
definitions, as well as commands for administering the
server.

PATROL Parameter Reference Manual 329

PATROL Parameter Reference Manual 330

Table 14 PATROL Internet Server Manager 6.2.00 (Part 12 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
deferredMsgs Y con 0–0 0–0 0–0 120 sec graph number of messages
(inactive by warn alarm
Shows the number of deferred messages in the mail default) (inactive by (inactive by
queue. default) default)

Collector: mailQueueMonitor
mailQueueLength Y std 0–100 undef undef set by coll gauge number of requests
(inactive by
Shows the number of requests in the mail queue in a default)
Unix-based Netscape mail server or sendmail daemon.

Collector: mailQueueMonitor
mailQueueMonitor Y std 0–1 1–1 1–1 300 sec graph status number
alarm OK
Indicates the status of mailQueueMonitor operation.
mailStatsMonitor Y std 0–100 0–100 100–100 300 sec none status number
(inactive by warn alarm
Indicates the status of the mailStatsMonitor operation. default) (inactive by (inactive by
default) default)
msgInRate Y con 0–0 0–0 0–0 set by coll graph messages per min
(inactive by warn alarm
Indicates the number of inbound messages per minute. default) (inactive by (inactive by
default) default)
Collector: mailStatsMonitor
msgOutRate Y con 0–0 0–0 0–0 set by coll graph messages per min
(inactive by warn alarm
Indicates the number of outbound messages per minute. default) (inactive by (inactive by
default) default)
Collector: mailStatsMonitor
processMonitor Y std 0–100 0–100 100–100 300 sec text none
(inactive by warn alarm
Records process metrics for a monitored mail server. default) (inactive by (inactive by
default) default)
Table 14 PATROL Internet Server Manager 6.2.00 (Part 13 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
smtpDownTime Y con 0–1000 1–180 180–1000 set by coll graph sec
warn alarm
Reports the downtime in seconds for the SMTP server.

Collector: smtpMonitor
smtpMonitor Y std 0–1 1–1 0–0 75 sec none none
warn alarm
Performs client connections to a SMTP-based mail server. (inactive by
default)
smtpResponseTime Y con 0–60 0–0 0–0 set by coll graph msec
(inactive by warn alarm
Indicates the response time for the SMTP request. default) (inactive by (inactive by
default) default)
Collector: smtpMonitor
smtpResponseTimeStdDeviation N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Standard deviation of response time for the Mail server.
This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: smtpMonitor
smtpStatus Y con 0–100 1–1 2–2 set by coll stoplight 0 - OK,
OK warn alarm 1 - warn,
Indicates the connection status from the mail server. 2 - alarm

Collector: smtpMonitor
smtpStatusCode Y con 0–0 0–0 0–0 NA graph none
(inactive by warn alarm
Indicates the connection status code from the mail server. default) (inactive by (inactive by
default) default)
Collector: smtpMonitor

PATROL Parameter Reference Manual 331

PATROL Parameter Reference Manual 332

Table 14 PATROL Internet Server Manager 6.2.00 (Part 14 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
INET_MS_ASP Application Class
AspCompilerErrorRate Y con 0–5000 1–10 0–5000 set by coll graph errors per min
warn alarm
Reports the rate at which ASP script compiler errors were
generated.

Collector: AspMonitor
AspMemoryAllocated Y con 0–50 0–50 50–50 set by coll graph KB
OK OK OK
Displays the total amount of memory, in kilobytes,
currently allocated by ASP.

Collector: AspMonitor
AspMonitor Y std 0–1 1–1 1–1 600 sec bool KB
warn OK
Discovers client connections to an ASP server and
populates the ASP consumer parameters.
AspRqtFailedRate Y con 0–5000 5–20 20–5000 NA graph failed requests per
warn alarm min
Reports the number of ASP requests per minute that
failed due to errors, authorization failures, and rejections.

Collector: AspMonitor
AspRqtQueued Y con 0–100 90–95 95–100 set by coll graph percentage of queued
warn alarm requests that are ASP
Reports ASP requests queued as a percentage of all requests
requests made.

Collector: AspMonitor
AspRqtTimedOutRate Y con 0–5000 5–20 20–5000 NA graph timed out ASP
warn alarm requests per min
Reports the ASP requests per minute that have timed out.

Collector: AspMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 15 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AspRuntimeErrorRate Y con 0–5000 1–10 10–5000 set by coll graph errors per min
warn alarm
Reports ASP script runtime errors per minute.

Collector: AspMonitor
AspSessionCurrent Y con 0–100 0–100 100–100 set by coll graph none
OK OK OK
Displays the current number of sessions being serviced.

Collector: AspMonitor
AspSessionTimedOut Y con undef undef undef set by coll graph none

Displays the number of ASP sessions that have timed out.

Collector: AspMonitor
INET_MS_Ftp Application Class
connectionMaxPercent Y con undef undef undef set by coll graph percentage of current
connections
Reports the percentage of connections compared to the
maximum connections possible.

Collector: msPerfMonitor (INET_MS_Ftp)

connectionRate Y con undef undef undef set by coll graph connection attempts
per min
Reports the number connections that are attempted per
minute.

Collector: msPerfMonitor (INET_MS_Ftp)

dataRcvdRate Y con undef undef undef set by coll graph KB per min

Reports the rate at which data is received by the server in

kilobytes per minute.

Collector: msPerfMonitor (INET_MS_Ftp)

PATROL Parameter Reference Manual 333

PATROL Parameter Reference Manual 334

Table 14 PATROL Internet Server Manager 6.2.00 (Part 16 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
dataSentRate Y con undef undef undef set by coll graph KB per min

Reports the rate at which data is sent by the server in

kilobytes per minute.

Collector: msPerfMonitor (INET_MS_Ftp)

filesRcvdRate Y con undef undef undef set by coll graph files per min

Indicates the rate at which files are received.

Collector: msPerfMonitor (INET_MS_Ftp)

filesSentRate Y con undef undef undef set by coll graph files per min

Indicates the rate at which files are sent.

Collector: msPerfMonitor (INET_MS_Ftp)

msPerfMonitor Y std undef undef undef 300 sec text files per min

Records performance counters for a Microsoft FTP server.

INET_MS_Index Application Class
cachedQueries Y con undef undef undef set by coll graph number of completed
queries
Reports the number of completed queries in the cache.

Collector: msPerfMonitor (INET_MS_Index)

cacheHitPercent Y con undef undef undef set by coll graph percentage of queries
in query cache
Indicates the percentage of queries found in the query
cache.

Collector: msPerfMonitor (INET_MS_Index)

Table 14 PATROL Internet Server Manager 6.2.00 (Part 17 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
cacheMissPercent Y con undef undef undef set by coll graph percentage of queries
not in query cache
Reports the percentage of queries not found in the query
cache.

Collector: msPerfMonitor (INET_MS_Index)

cacheUsedPercent Y con undef undef undef set by coll graph percentage of shared
memory storing
Indicates the percentage of maximum shared memory cached data
cache currently containing cached data.

Collector: msPerfMonitor (INET_MS_Index)

msPerfMonitor Y std undef undef undef 300 sec text none

Records performance counters for a Microsoft Index

server.
pendingQueries Y con undef undef undef set by coll graph number of queries

Indicates the number of queued queries.

Collector: msPerfMonitor (INET_MS_Index)

queryRate Y con undef undef undef set by coll graph queries per min

Indicates the number of queries per minute.

Collector: msPerfMonitor (INET_MS_Index)

INET_MS_ISA Application Class
BWC_InboundBytes Y con undef undef undef set by coll graph number of inbound
bytes per second
Reports the current inbound bandwidth, in bytes per
seconds, for the Web proxy service.

Collector: msPerfMonitor (INET_MS_ISA)

PATROL Parameter Reference Manual 335

PATROL Parameter Reference Manual 336

Table 14 PATROL Internet Server Manager 6.2.00 (Part 18 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BWC_OutboundBytes Y con undef undef undef set by coll graph number of outbound
bytes per second
Reports the current outbound bandwidth, in bytes per
second, for the Web proxy service.

Collector: msPerfMonitor (INET_MS_ISA)

msPerfMonitor Y std undef undef undef 300 sec text number of errors

Gathers performance counter data for the Microsoft ISA

2000 server. If the msPerfMonitor parameter encounters
an error warning, the textual description of the problem
is set as the parameter’s value. The parameter then issues
an alarm or warning for the duration of the problem.
PROXY_CacheRunningHitRatio Y con undef undef undef set by coll graph percent of requests

Reports the percent of Web proxy client request that have

been served, using cached data from the total number of
Web proxy client requests over the last 10,000 requests
serviced.

Collector: msPerfMonitor (INET_MS_ISA)

PROXY_CurrentUsers Y con undef undef undef set by coll graph number of current
users
Reports the number of current users currently connected
to the Web Proxy service.

Collector: msPerfMonitor (INET_MS_ISA)

Table 14 PATROL Internet Server Manager 6.2.00 (Part 19 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PROXY_TotalFailRequests Y con undef undef undef set by coll graph number of requests

Reports the total number of requests that have failed to be

processed due to errors on the Web Proxy service. Errors
can be a result of the Web Proxy service failing to locate a
requested server URL on the Internet. Errors can also
occur if the Web Proxy client is denied access to the
requested URL.

Collector: msPerfMonitor (INET_MS_ISA)

PROXY_TotalRequests Y con undef undef undef set by coll graph number of requests

Reports the total number of request made to the Web

proxy service since the last polling cycle.

Collector: msPerfMonitor (INET_MS_ISA)

PROXY_TotalSitesDenied Y con undef undef undef set by coll graph number of sites
denied
Reports the total number of Internet sites that the Web
Proxy service has denied access.

Collector: msPerfMonitor (INET_MS_ISA)

INET_MS_lis Application Class
asyncIoAllowPercent Y con 0–0 0–0 0–0 set by coll graph percentage of
OK OK OK asynchronous I/O
Indicates the percentage of asynchronous input/output requests processed
requests that were allowed to process by the bandwidth
throttler.

Collector: msPerfMonitor (INET_MS_lis)

PATROL Parameter Reference Manual 337

PATROL Parameter Reference Manual 338

Table 14 PATROL Internet Server Manager 6.2.00 (Part 20 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
asyncIoBlockPercent Y con undef undef undef set by coll graph percentage of
asynchronous I/O
Indicates the percentage of asynchronous input/output requests blocked
requests that were blocked by the bandwidth throttler.

Collector: msPerfMonitor (INET_MS_lis)

asyncIoRate Y con undef undef undef set by coll graph requests per min

Reports the number of asynchronous input/output

requests per minute.

Collector: msPerfMonitor (INET_MS_lis)

asyncIoRejectPercent Y con undef undef undef set by coll graph percentage of
asynchronous I/O
Indicates the percentage of asynchronous input/output requests rejected
requests that were rejected by the bandwidth throttler.

Collector: msPerfMonitor (INET_MS_lis)

cacheHitPercent Y con undef undef undef set by coll graph ratio of hits to cache
requests
Reports the ratio of the number of hits to the number of
cache requests.

Collector: msPerfMonitor (INET_MS_lis)

msPerfMonitor Y std undef undef undef 300 sec text none

Records performance counters for all services running

under a Microsoft Internet Information server.
INET_MS_Locator Application Class
ilsAppsRegisterRate Y con 0–100 undef undef set by coll graph registrations per min
(inactive by
Reports the number of registrations per minute for the default)
ILS application.

Collector: msPerfMonitor (INET_MS_Locator)

Table 14 PATROL Internet Server Manager 6.2.00 (Part 21 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ilsAppsUnRegisterRate Y con 0–100 undef undef set by coll graph unregistrations per
(inactive by min
Reports the number of unregistrations per minute for the default)
ILS application.

Collector: msPerfMonitor (INET_MS_Locator)

ilsDirectoryRequestRate Y con 0–100 undef undef set by coll graph requests per min
(inactive by
Reports the number of requests per minute for the ILS default)
directory.

Collector: msPerfMonitor (INET_MS_Locator)

ilsUserRegisterMaxPercent Y con 0–100 85–95 95–100 set by coll graph percentage of
registered ILS users
Reports the percentage of ILS registered users (the ratio
of current ILS registered users to the ILS server
registration limit).

Collector: msPerfMonitor (INET_MS_Locator)

ldapConnectMaxPercent Y con 0–100 85–95 95–100 set by coll graph percentage used of
maximum LDAP
Reports the percentage used of the maximum LDAP server connections
server connections (the ratio of current client connections
to the concurrent client connection limit).

Collector: msPerfMonitor (INET_MS_Locator)

ldapConnectRate Y con undef undef undef set by coll graph connections per min

Indicates the number of LDAP server connections per

minute.

Collector: msPerfMonitor (INET_MS_Locator)

PATROL Parameter Reference Manual 339

PATROL Parameter Reference Manual 340

Table 14 PATROL Internet Server Manager 6.2.00 (Part 22 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
msPerfMonitor Y std undef undef undef 300 sec text none

Records performance counters for a Microsoft Internet

Locator server.
queueLength Y con undef undef undef set by coll text number of requests

Reports the number of requests waiting in the ILS server

queue.

Collector: msPerfMonitor (INET_MS_Locator)

whitePageAuthFailRate Y con undef undef undef set by coll graph failures per min

Indicates number of white-page authorization failures

per minute.

Collector: msPerfMonitor (INET_MS_Locator)

INET_MS_News Application Class
articlePostRate Y con undef undef undef set by coll graph articles per min

Reports the rate at which news articles were posted.

Collector: msPerfMonitor (INET_MS_News)

articleRecvRate Y con undef undef undef set by coll graph articles per min

Reports the rate at which news articles were received by

the server.

Collector: msPerfMonitor (INET_MS_News)

articleSentRate Y con undef undef undef set by coll graph articles per min

Reports the rate at which news articles were sent by the

server.

Collector: msPerfMonitor (INET_MS_News)

Table 14 PATROL Internet Server Manager 6.2.00 (Part 23 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
cntlMsgFailPercent Y con undef undef undef set by coll graph percentage of
received control
Reports the percentage of received control messages that messages that failed
failed.

Collector: msPerfMonitor (INET_MS_News)

inboundConnectMaxPercent Y con undef undef undef set by coll graph ratio of inbound
connections to
Reports the ratio of current inbound connections to the inbound connection
concurrent inbound connection limit. limit

Collector: msPerfMonitor (INET_MS_News)

inboundConnectRate Y con undef undef undef set by coll graph connections per min

Reports the number of inbound news server connections

per minute.

Collector: msPerfMonitor (INET_MS_News)

logonAttemptFailPercent Y con 0–100 70–90 90–100 set by coll graph percentage of login
warn alarm attempts that failed
Indicates the percentage of login attempts that failed.

Collector: msPerfMonitor (INET_MS_News)

logonAttemptRate Y con undef undef undef set by coll graph attempts per min

Indicates the number of logo attempts per minute.

Collector: msPerfMonitor (INET_MS_News)

msPerfMonitor Y std undef undef undef 300 sec text none

Records performance counters for a Microsoft News

server.

PATROL Parameter Reference Manual 341

PATROL Parameter Reference Manual 342

Table 14 PATROL Internet Server Manager 6.2.00 (Part 24 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
outboundConnectErrorPercent Y con undef undef undef set by coll graph percentage of
outbound server
Reports the percentage of outbound server connections connections that
that failed. failed

Collector: msPerfMonitor (INET_MS_News)

INET_MS_Web Application Class
dataRcvdRate Y con undef undef undef set by coll graph KB per min

Reports the rate at which data is received by the server in

kilobytes per minute.

Collector: msPerfMonitor (INET_MS_Web)

dataSentRate Y con undef undef undef 0–1 graph KB per min
alarm
Reports the rate at which data is sent by the server in
kilobytes per minute.

Collector: msPerfMonitor (INET_MS_Web)

filesRcvdRate Y con undef undef undef set by coll graph files per min

Indicates the rate at which files are received.

Collector: msPerfMonitor (INET_MS_Web)

filesSentRate Y con undef undef undef set by coll graph files per min

Indicates the rate at which files are sent.

Collector: msPerfMonitor (INET_MS_Web)

msPerfMonitor Y std 0–1 1–1 0–0 300 sec text none
alarm alarm alarm
Records performance counters for the Web server portion
of a Microsoft Internet Information server.
Table 14 PATROL Internet Server Manager 6.2.00 (Part 25 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
INET_News_Server Application Class
configureLocal Y coll undef undef undef 120 sec text none

Configures local server settings for a monitored news

server. These settings include the process monitoring
definitions, as well as commands for administering the
server.
nntpDownTime Y con 0–1000 1–180 180–1000 none graph sec
warn alarm
Reports the downtime in seconds for the NNTP server.

Collector: nntpMonitor
nntpMonitor N std 0–1 1–1 0–0 set by coll text none
alarm alarm OK
Performs client connections to a NNTP-based news
server.
nntpResponseTime Y con 0–60 undef undef set by coll graph msec
(inactive by
Indicates the response time for the NNTP request. default)

Collector: nntpMonitor
nntpResponseTimeStdDeviation N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Standard deviation of response time for the NNTP news
server. This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: nntpMonitor

PATROL Parameter Reference Manual 343

PATROL Parameter Reference Manual 344

Table 14 PATROL Internet Server Manager 6.2.00 (Part 26 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
nntpStatus Y con 0–100 1–1 2–2 set by coll stoplight 0 - OK,
OK warn alarm 1 - warn,
Indicates the connection status from the news server. 2 - alarm

Collector: nntpMonitor
nntpStatusCode Y con undef undef undef NA graph NA

Indicates the connection status code from the news

server.

Collector: nntpMonitor
processMonitor Y std undef undef undef 300 sec text none

Records process metrics for a monitored news server.

INET_Pop3_Server Application Class
configureLocal Y coll undef undef undef 120 sec text number of processes

Configures local server settings for a monitored server.

These settings include the process monitoring definitions,
as well as commands for administering the server.
pop3DownTime Y con 0–1000 1–180 180–1000 NA graph sec
warn alarm
Reports the downtime in seconds for the POP3 server.

Collector: pop3Monitor
pop3Monitor Y std undef undef undef 75 sec text msec

Records client connections to a POP3-based mail server.

pop3ResponseTime Y con 0–60 0–0 0–60 set by coll graph msec
(inactive by warn alarm
Indicates the response time for the POP3 request. default) (inactive by (inactive by
default) default)
Collector: pop3Monitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 27 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
pop3ResponseTimeStdDeviation N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Standard deviation of response time for the POP3 server.
This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: pop3Monitor
pop3Status Y con 0–100 1–1 2–2 set by coll stoplight 0 - OK,
OK warn alarm 1 - warn,
Indicates the connection status from the POP3 server. 2 - alarm

Collector: pop3Monitor
pop3StatusCode Y con undef undef undef set by coll graph NA

Indicates the connection status code from the POP3

server.

Collector: pop3Monitor
processMonitor Y std undef undef undef 300 sec text msec

Records process metrics for a monitored POP3 server.

INET_Portmon_Inst Application Class
portContent Y con undef undef undef set by coll text NA

Indicates the contents returned from the monitored port.

Collector: portMonitor

PATROL Parameter Reference Manual 345

PATROL Parameter Reference Manual 346

Table 14 PATROL Internet Server Manager 6.2.00 (Part 28 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
portContentStatus Y con undef 1–1 undef set by coll stoplight NA
alarm
Indicates the content status of the monitored port. This
parameter measures the result of the content check
operation for the monitored port.

Collector: portMonitor
portDownTime Y con 0–1000 1–180 180-1000 alarm set by coll graph sec
alarm warn
Indicates the downtime, in seconds, for the monitored
port.

Collector: portMonitor
portMonitor Y std 0–1 1–1 0–0 300 sec bool sec
alarm alarm OK
Collector parameter that performs client connections for
each monitored port instance. If the portMonitor
parameter encounters an error or warning, the textual
description of the problem is set as the parameter’s value.
The parameter then issues an alarm or warning for the
duration of the problem.
portResponseTime Y con undef undef undef set by coll graph msec

Indicates the response time, in milliseconds, for the

monitored port.

Collector: portMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 29 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
portResponseTimeStdDeviation N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Standard deviation of response time for the port monitor.
This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: portMonitor
portStatus Y con undef 1–1 2–2 set by coll stoplight 0 - OK,
alarm OK 1 - warn,
Indicates the status of th monitored ports. 2 - alarm
INET_Process Application Class
childProcesses Y con 0–100 undef undef set by coll graph number of processes
alarm
Reports the number of child processes running on the
server.

Collector:
cpuUsage Y con 0–100 undef undef set by coll graph percentage of CPU
alarm usage
Reports the percentage of CPU usage by server/children
processes.

Collector: processMonitor
downTime Y con 0–100 undef undef set by coll gauge min
alarm
Indicates the time the process has been down.

Collector: processMonitor

PATROL Parameter Reference Manual 347

PATROL Parameter Reference Manual 348

Table 14 PATROL Internet Server Manager 6.2.00 (Part 30 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
idleTime Y con 0–100 undef undef set by coll gauge min
alarm
Reports the number of minutes that the process has been
idle.

Collector: processMonitor
memoryUsage Y con 0–100 undef undef set by coll graph number of blocks
alarm
Indicates the memory usage by the server/child
processes.

Collector: processMonitor
processCount Y con 0–100 undef undef set by coll gauge number of processes
alarm
Indicates the number of processes running on the server.

Collector: processMonitor
INET_Protocol_Tcp Application Class
numStateClose_Wait Y con 0–0 0–0 0–0 set by coll graph number of
(inactive by warn alarm connections
Indicates the number of connections in CLOSE_WAIT default) (inactive by (inactive by
state. default) default)

Collector: tcpMonitor
numStateClosed Y con 0–0 0–0 0–0 set by coll graph number of
(inactive by warn alarm connections
Indicates the number of connections in CLOSED state. default) (inactive by (inactive by
default) default)
Collector: tcpMonitor
numStateClosing Y con 0–0 0–0 0–0 set by coll graph number of
(inactive by warn alarm connections
Indicates the number of connections in CLOSING state. default) (inactive by (inactive by
default) default)
Collector: tcpMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 31 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
numStateEstablished Y con 0–0 0–0 0–0 set by coll graph number of
(inactive by warn alarm connections
Indicates the number of connections in ESTABLISHED default) (inactive by (inactive by
state. default) default)

Collector: tcpMonitor
numStateFin_Wait_1 Y con 0–0 0–0 0–0 set by coll graph number of
(inactive by warn alarm connections
Indicates the number of connections in FIN_WAIT_1 default) (inactive by (inactive by
state. default) default)

Collector: tcpMonitor
numStateFin_Wait_2 Y con 0–0 0–0 0–0 set by coll graph number of
(inactive by warn alarm connections
Indicates the number of connections in FIN_WAIT_2 default) (inactive by (inactive by
state. default) default)

Collector: tcpMonitor
numStateLast_Ack Y con 0–0 0–0 0–0 set by coll graph number of
(inactive by warn alarm connections
Indicates the number of connections in LAST_ACK state. default) (inactive by (inactive by
default) default)
Collector: tcpMonitor
numStateListen Y con 0–0 0–0 0–0 set by coll graph number of
(inactive by warn alarm connections
Indicates the number of connections in LISTEN state. default) (inactive by (inactive by
default) default)
Collector: tcpMonitor
numStateSyn_Received Y con 0–0 0–0 0–0 set by coll graph number of
(inactive by warn alarm connections
Indicates the number of connections in SYN_RECEIVED default) (inactive by (inactive by
state. default) default)

Collector: tcpMonitor

PATROL Parameter Reference Manual 349

PATROL Parameter Reference Manual 350

Table 14 PATROL Internet Server Manager 6.2.00 (Part 32 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
numStateSyn_Sent Y con 0–0 0–0 0–0 set by coll graph number of
(inactive by warn alarm connections
Indicates the number of connections in SYN_SENT state. default) (inactive by (inactive by
default) default)
Collector: tcpMonitor
numStateTime_Wait Y con 0–0 0–0 0–0 set by coll gauge number of
(inactive by warn alarm connections
Indicates the number of connections in TIME_WAIT default) (inactive by (inactive by
state. default) default)

Collector: tcpMonitor
tcpIn Y con 0–100 0–0 0–0 set by coll gauge KB per min
(inactive by warn alarm
Indicates the rate of incoming TCP data. default) (inactive by (inactive by
default) default)
Collector: tcpMonitor
tcpMonitor Y std 0–1 1–1 0–0 300 sec text none
warn alarm
Collects TCP protocol statistics.
tcpOut Y con 0–75000 45000–56250 56251–75000 set by coll graph KB per min
warn alarm
Indicates the rate of outgoing TCP data.

Collector: tcpMonitor
tcpRetran Y con 0–100 undef undef set by coll graph KB per polling cycle

Indicates the absolute delta value of retransmissions

bytes/segments from one collection cycle to the next.

Collector: tcpMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 33 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
INET_Proxy_Server Application Class
configureFilesys Y coll 0–100 undef undef 120 sec text min

Configures the associated file system settings for a

monitored server. These settings include the locations of
the directories or log files.
configureLocal Y coll 0–100 undef undef 120 sec text min

Configures local server settings for a monitored server.

These settings include the process monitoring definitions,
as well as commands for administering the server.
httpDownTime Y con 0–1000 1–181 181–1000 NA graph sec
warn alarm
Indicates the downtime, in seconds, for the HTTP server.

Collector: httpMonitor (INET_Proxy_Server)

httpResponseTime N con 0–60 undef undef set by coll graph msec
(inactive by
Reports the response time for the request. default)

Collector: httpMonitor (INET_Proxy_Server)

httpResponseTimeStdDeviation N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Standard deviation of response time for the proxy server.
This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: httpMonitor (INET_Proxy_Server)

PATROL Parameter Reference Manual 351

PATROL Parameter Reference Manual 352

Table 14 PATROL Internet Server Manager 6.2.00 (Part 34 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
httpMonitor Y std undef undef undef 75 sec text none

Performs client connections to an HTTP-based proxy

server.
httpStatus Y con 0–100 1–1 2–2 set by coll stoplight 0 - OK,
OK warn alarm 1 - warn,
Indicates the connection status from the proxy server. 2 - alarm

Collector: httpMonitor (INET_Proxy_Server)

httpStatusCode Y con undef undef undef set by coll graph NA

Indicates the connection status code from the proxy

server.

Collector: httpMonitor (INET_Proxy_Server)

processMonitor Y std undef undef undef 300 sec text none

Records process metrics for a monitored proxy server.

INET_Servers Application Class
addServers Y coll undef undef undef 120 sec text none

Adds servers that are not auto discovered to be

monitored.
Table 14 PATROL Internet Server Manager 6.2.00 (Part 35 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
INET_Services Application Class
confInst Y coll NA NA NA 120 sec text none

Runs each time the PATROL agent is started and

discovers Internet servers available for monitoring on the
local system.
baseMon Y coll NA NA NA 30 sec NA NA

Gathers CPU and memory usage values to create a

baseline matrix of the local system’s performance. This
matrix is used to investigate the role of CPU or memory
usage as a probable cause in case of a server failure. For
Windows, this parameter depends on the PATROL
Perform Agent running on the system.
enterKeyPass Y coll NA NA NA 60 sec NA NA

Periodically prompts you for the key store password if

you are using client side certificates. If you do not use
client side certificates, or if you use client side certificates
and the password has been provided, this parameter is
inactive.
INET_Web_AccLog Application Class
accessLogMonitor Y std NA NA NA 300 sec text none

Analyzes the access log and populates the accessLogSize

and accessLogUpdateTime parameters. Sets parameters
in the other access log application classes.
accLogPctRead Y con 0–100 0–100 100–100 NA graph percent
(inactive by (inactive by alarm
Reports the percentage of log read during the interval. default) default) (inactive by
This can be used by the user in conjunction with the default)
governor value to tune the operation of the
accessLogMonitor collector.

Collector: accessLogMonitor

PATROL Parameter Reference Manual 353

PATROL Parameter Reference Manual 354

Table 14 PATROL Internet Server Manager 6.2.00 (Part 36 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
accessLogSize Y con 0–50 NA NA set by coll gauge MB

Indicates the size of the proxy server's Access Log in

megabytes.

Collector: accessLogMonitor
accessLogUpdateTime Y con 0–100 NA NA set by coll gauge min

Indicates the time since the last Access Log file update.

Collector: accessLogMonitor
INET_Web_AccLogStat Application Class
procTime N con 0–100 NA NA set by coll graph msec
(inactive by
Reports the total processing time of all requests matching default)
this access log statistic.

Collector: accessLogMonitor
procTimeAverage N con 0–100 NA NA set by coll graph msec
(inactive by
Reports the average processing time of all requests default)
matching this access log statistic.

Collector: accessLogMonitor
procTimePercent N con 0–100 NA NA set by coll graph percentage of
(inactive by processing time
Reports the percentage of the processing time for all default)
requests matching this access log statistic.

Collector: accessLogMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 37 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
requests Y con 0–100 NA NA set by coll graph number of requests
(inactive by
Indicates the total requests processed by the server default)
during the interval.

Collector: accessLogMonitor
requestRatePerHour Y con 0–100 NA NA set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-hour interval.
requestRatePerMinute Y con 0–100 NA NA set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-minute interval.

Collector: accessLogMonitor
requestRatePerSec Y con 0–100 NA NA set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-second interval.

Collector: accessLogMonitor
requestRateStdDev N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Deviation of requestRatePerMin from the average value
over the previous 40 polling cycles. This parameter
contains the number of standard deviations above the
average for the current value. This parameter is not
populated (has no value) if there are less than 40
historical data points. The alarm is triggered only if the
standard deviation is above the threshold for 3 or more
consecutive collection cycles.

Collector: accessLogMonitor

PATROL Parameter Reference Manual 355

PATROL Parameter Reference Manual 356

Table 14 PATROL Internet Server Manager 6.2.00 (Part 38 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
requestsPeak N con 0–100 NA NA set by coll graph requests per min
(inactive by
Indicates the peak rate at which requests were received default)
by the server during a one-minute collection interval,
based on the peak interval setting.

Collector: accessLogMonitor
requestsPeakPercent N con 0–100 97–100 NA set by coll graph ratio of requests to
warn peak rate of requests
Reports the ratio of the rate of requests (requests
parameter) to the peak rate of requests (requestsPeak
parameter).

Collector: accessLogMonitor
requestsPercent Y con 0–100 NA NA set by coll graph ratio of request
instances to all
Reports the ratio of the number of requests for this requests
request instance to the number of all requests.

Collector: accessLogMonitor
responseSize Y con 0–100 NA NA set by coll graph KB per min

Indicates the size of the responses processed by the server

in kilobytes per minute.

Collector: accessLogMonitor
responseSizeAverage Y con 0–100 NA NA set by coll graph KB
(inactive by
Indicates the average size of the responses processed by default)
the server during a one-minute interval.

Collector: accessLogMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 39 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
responseSizePeak N con 0–100 NA NA set by coll graph KB per min
(inactive by
Indicates the peak size of the responses in kilobytes per default)
minute during a one-minute collection interval.

Collector: accessLogMonitor
responseSizePeakPercent N con 0–100 97–100 NA set by coll graph ratio of rate of ALL
warn responses to peak
Indicates the ratio of the size of this response instance rate of ALL
(responseSize parameter) to the peak size of all responses responses
(responseSizePeak parameter).

Collector: accessLogMonitor
responseSizePercent Y con 0–100 97–100 NA set by coll graph ratio of response
warn instances to the rate
Indicates the ratio of the size of this response instance to of all responses
the size of all responses.

Collector: accessLogMonitor
INET_Web_Application Application Class
badLinks Y con 0–0 1–100 100–100 none graph number of bad links
(inactive by warn alarm
Displays the number of bad links for this URL. To view default) (inactive by
the results of a Link Check operation, double-click the default)
parameter's annotation point.

Collector: httpMonitor (INET_Web_server)

pageApplicationsTime N con undef undef undef set by coll graph msec

Reports the total response time, in milliseconds, for all

application elements. This parameter is inactive by
default. To activate this parameter, use the Page response
time preference option in the URL Monitoring dialog box.

Collector: httpMonitor (INET_Web_server)

PATROL Parameter Reference Manual 357

PATROL Parameter Reference Manual 358

Table 14 PATROL Internet Server Manager 6.2.00 (Part 40 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
pageContent Y con 0–100 0–100 100–100 none text none
OK OK OK
Indicates the contents of the URL.

Collector: httpMonitor (INET_Web_server)

pageContentStatus Y con 0–1 0–1 1–1 none stoplight none
alarm warn alarm
Indicates the content status of the URL. (inactive by
default)
Collector: httpMonitor (INET_Web_server)
pageDownTime Y con 0–1000 1–180 180–1000 set by coll graph sec
alarm warn alarm
Indicates the downtime for the URL.

Collector: httpMonitor (INET_Web_server)

pageImagesTime N con undef undef undef set by coll graph msec

Reports the total response time, in milliseconds, for all

image elements. This parameter is inactive by default. To
activate this parameter, use the Page response time
preference option in the URL Monitoring dialog box.

Collector: httpMonitor (INET_Web_server)

pageResponseTime Y con 0–60 0–60 60–60 set by coll graph msec
alarm OK OK
Indicates the response time (in milliseconds) for the URL.

Collector: httpMonitor (INET_Web_server)

Table 14 PATROL Internet Server Manager 6.2.00 (Part 41 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
pageResponseTimeStdDeviation N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Standard deviation of average URL response time. This
parameter contains the number of standard deviations
above the average for the current value. This parameter is
not populated (has no value) if there are less than 40
historical data points. The alarm is triggered only if the
standard deviation is above the threshold for 3 or more
consecutive collection cycles.

Collector: httpMonitor (INET_Web_server)

pageStatus Y con 0–100 1–1 2–1 set by coll stoplight 0 - OK,
OK warn alarm 1 - warn,
Indicates the connection status from the URL. 2 - alarm

Collector: httpMonitor (INET_Web_server)

pageStatusCode Y con 0–0 0–100 100–100 NA graph NA
(inactive by (inactive by alarm
Indicates the connection status code from the URL. default) default) (inactive by
default)
Collector: httpMonitor (INET_Web_server)
pageTextTime N con 0–1000 undef undef NA graph msec
alarm
Reports the total response time, in milliseconds, for all
text elements. This parameter is inactive by default. To
activate this parameter use the Page Response time
preferences option in the URL Monitoring dialog box.

Collector: httpMonitor (INET_Web_server)

linkMonitor N std 0–0 1–1 2–2 300 sec stoplight none
(inactive by warn alarm
Indicates the status of the linkMonitor operation for this default) (inactive by (inactive by
URL. Any errors encountered by the linkMonitor will be default) default)
annotated onto data points in the linkMonitor graph.

PATROL Parameter Reference Manual 359

PATROL Parameter Reference Manual 360

Table 14 PATROL Internet Server Manager 6.2.00 (Part 42 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
INET_Web_ClientHost Application Class
procTime N con 0–100 undef undef set by coll graph msec
(inactive by
Reports the total processing time of the request. default)

Collector: accessLogMonitor
procTimeAverage N con 0–100 undef undef set by coll graph msec
(inactive by
Reports the average processing time of the requests. default)

Collector: accessLogMonitor
procTimePercent N con 0–100 undef undef set by coll graph percentage of
(inactive by processing time
Reports the percentage of the processing time of all default)
requests matching this access log statistic.

Collector: accessLogMonitor
requests Y con 0–100 undef undef set by coll graph number of requests
(inactive by
Totals all requests processed by the server in the interval. default)

Collector: accessLogMonitor
requestRatePerHour Y con 0–100 undef undef set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-hour interval.
requestRatePerMinute Y con 0–100 undef undef set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-minute interval.

Collector: accessLogMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 43 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
requestRatePerSec Y con 0–100 undef undef set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-second interval.

Collector: accessLogMonitor
requestsPeak N con 0–100 undef undef set by coll graph requests per min
(inactive by
Indicates the peak rate at which requests were received default)
by the server during a one-minute collections interval.

Collector: accessLogMonitor
requestsPeakPercent N con 0–100 97–100 undef set by coll graph ratio of the rate of
warn requests to the peak
Reports the ratio of the rate of requests (requests rate of requests
parameter) to the peak rate of requests (requestsPeak
parameter).

Collector: accessLogMonitor
requestsPercent Y con 0–100 undef undef set by coll graph ratio of request
instances to all
Reports the ratio of the number of requests for this requests
request instance to the number of all requests.

Collector: accessLogMonitor
responseSize Y con 0–100 undef undef set by coll graph KB per min

Indicates the size of responses processed by the server in

kilobytes per minute.

Collector: accessLogMonitor

PATROL Parameter Reference Manual 361

PATROL Parameter Reference Manual 362

Table 14 PATROL Internet Server Manager 6.2.00 (Part 44 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
responseSizeAverage Y con 0–100 undef undef set by coll graph KB
(inactive by
Indicates the average size of responses processed by the default)
server during a one-minute interval.

Collector: accessLogMonitor
responseSizePeak N con 0–100 undef undef set by coll graph KB per min
(inactive by
Indicates the peak rate of responses during a one-minute default)
collection interval.

Collector: accessLogMonitor
responseSizePeakPercent N con 0–100 97–100 undef set by coll graph ratio of the rate of all
warn responses to the peak
Indicates the ratio of the size of this response instance rate of all responses
(responseSize parameter) to the peak size of all responses
(responseSizePeak parameter).

Collector: accessLogMonitor
responseSizePercent Y con 0–100 97–100 undef set by coll graph ratio of response
warn instances to the rate
Indicates the ratio of the size of this response instance to of all responses
the size of all responses.

Collector: accessLogMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 45 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
INET_Web_ErrLog
errorLogMonitor Y std undef undef undef 300 sec text min

Performs error log analysis and populates the consumer

parameters of the INET_Web_ErrLogStat application
class. It also sets the values of the errorLogSize and
errorLogUpdateTime parameters in the
INET_Proxy_Server application class. If the parameter
encounters an error or warning, the textual description of
the problem is set as the parameter’s value, and the
errorLogMonitor parameter then issues an alarm or
warning for the duration of the problem.
errorLogSize Y con 0–50 undef undef set by coll gauge MB
(inactive by
Indicates the size of the error log file. default)

Collector: errorLogMonitor
errorLogUpdateTime N con 0–100 undef undef set by coll gauge min
(inactive by
Indicates the number of minutes since the last Error Log default)
File update.

Collector: errorLogMonitor
INET_Web_ErrLogStat Application Class
errorPercent Y con 0–100 undef undef set by coll graph percent of error type
out of total errors
Reports errors of a given type as a percentage of the total
errors that occurred during a poll period.

Collector: errorLogMonitor

PATROL Parameter Reference Manual 363

PATROL Parameter Reference Manual 364

Table 14 PATROL Internet Server Manager 6.2.00 (Part 46 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
errorRate Y con 0–100 undef undef set by coll graph errors per min
(inactive by
Indicates the number of errors per minute for a given default)
error type.

Collector: errorLogMonitor
errors Y con 0–100 undef undef set by coll graph number of errors
(inactive by
Indicates the number of errors. default)

Collector: errorLogMonitor
INET_Web_Server Application Class
certChain Y con 0–0 0–0 0–0 NA text none
(inactive by (inactive by (inactive by
Displays information about each certificate in the chain. default) default) default)

Collector: httpMonitor (INET_Web_Server)

certDaysLeft Y con NA 0–15 15–31 43200 sec gauge days
alarm warn
Indicates the number of days left until the certificate
expires. If there is more than one component in the
certificate chain, this parameter indicates the minimum
number of days until one of the components expires.

Collector: httpMonitor (INET_Web_Server)

configureFilesys Y coll undef undef undef 120 sec text min

Configures the associated file system settings for a

monitored server. These settings include the locations of
the directories or log files.
configureLocal Y coll undef undef undef 120 sec text min

Configures local server settings for a monitored server.

These settings include the process monitoring definitions,
as well as commands for administering the server.
Table 14 PATROL Internet Server Manager 6.2.00 (Part 47 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
httpBusyThreads Y con undef undef undef set by coll graph number of threads

Indicates the number of busy threads. For Apache, this

corresponds to BusyWorkers. For Sun ONE, it
corresponds to ActiveThreads.

Collector: httpMonitor (INET_Web_Server)

httpDownTime Y con 0–1000 1–180 180–1000 set by coll graph sec
warn alarm
Indicates the downtime for the Web server.

Collector: httpMonitor (INET_Web_Server)

httpIdleThreads Y con undef undef undef set by coll graph number of threads

Indicates the number of idle threads. For Apache, this

corresponds to IdleWorkers. For Sun ONE, it corresponds
to WaitingThreads.

Collector: httpMonitor (INET_Web_Server)

httpMonitor Y std 0–1 1–1 0–0 75 sec text msec
alarm
Performs client connections to a Web server.
httpRemoteResponseTime N con 0–60 undef undef set by coll graph msec
(inactive by
Reports the remote response time for the monitored Web default)
server.

Collector: httpMonitor (INET_Web_Server)

httpResponseTime Y con 0–60 undef undef set by coll graph msec
(inactive by
Reports the response time for the requested URL. default)

Collector: httpMonitor (INET_Web_Server)

PATROL Parameter Reference Manual 365

PATROL Parameter Reference Manual 366

Table 14 PATROL Internet Server Manager 6.2.00 (Part 48 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
httpResponseTimeStdDeviation N con inactive by inactive by inactive by set by coll graph number of standard
default default default deviations
Standard deviation of response time for the web
application server. This parameter contains the number
of standard deviations above the average for the current
value. This parameter is not populated (has no value) if
there are less than 40 historical data points. The alarm is
triggered only if the standard deviation is above the
threshold for 3 or more consecutive collection cycles.

Collector: httpMonitor (INET_Web_server)

httpStatus Y con inactive by 1–1 2–2 set by coll stoplight 0 - OK,
default warn alarm 1 - warn,
Indicates the connection status from the Web server. 2 - alarm

Collector: httpMonitor (INET_Web_Server)

httpStatusCode Y con NA undef undef NA graph NA

Indicates the connection status code from the Web server.

Collector: httpMonitor (INET_Web_Server)

httpThreadSlotsLeft Y con undef undef undef set by coll graph number of slots

Indicates the number of thread slots remaining for

creation of new threads. For Apache, this corresponds to
the number of open slots identified by the . character in
the stats page. For Sun ONE, it corresponds to
ThreadLimits.

Collector: httpMonitor (INET_Web_Server)

processMonitor Y std NA undef undef 300 sec text per min

Records process metrics for a monitored Web server.

Table 14 PATROL Internet Server Manager 6.2.00 (Part 49 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
INET_Web_Url Application Class
procTime N con 0–100 undef undef set by coll graph msec
(inactive by
Reports the total processing time of the request. default)

Collector: accessLogMonitor
procTimeAverage N con 0–100 undef undef set by coll graph msec
(inactive by
Reports the average processing time of requests. default)

Collector: accessLogMonitor
procTimePercent N con 0–100 undef undef set by coll graph percentage of
(inactive by processing time of all
Reports the percentage of the processing time of requests. default) requests

Collector: accessLogMonitor
requests Y con 0–100 undef undef set by coll graph number of requests
(inactive by
Indicates the number of requests to the server in a one- default)
minute interval.

Collector: accessLogMonitor
requestRatePerHour Y con 0–100 undef undef set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-hour interval.

Collector: accessLogMonitor
requestRatePerMinute Y con 0–100 undef undef set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-minute interval.

Collector: accessLogMonitor

PATROL Parameter Reference Manual 367

PATROL Parameter Reference Manual 368

Table 14 PATROL Internet Server Manager 6.2.00 (Part 50 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
requestRatePerSec Y con 0–100 undef undef set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-second interval.

Collector: accessLogMonitor
requestsPeak N con 0–100 undef undef set by coll graph requests per min
(inactive by
Indicates the peak rate at which requests were received default)
by the server during a one-minute collections interval.

Collector: accessLogMonitor
requestsPeakPercent N con 0–100 97–100 undef set by coll graph ratio of the rate of
warn requests to the peak
Reports the ratio of the rate of requests (requests rate of requests
parameter) to the peak rate of requests (requestsPeak
parameter).

Collector: accessLogMonitor
requestsPercent Y con 0–100 undef undef set by coll graph ratio of the number of
request instances to
Reports the ratio of the number of requests for this all requests
request instance to the number of all requests.

Collector: accessLogMonitor
responseSize Y con 0–100 undef undef set by coll graph KB per min

Indicates the size of responses processed by the server in

kilobytes per minute.

Collector: accessLogMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 51 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
responseSizeAverage Y con 0–100 undef undef set by coll graph KB
(inactive by
Indicates the average size of responses processed by the default)
server during a one-minute interval.

Collector: accessLogMonitor
responseSizePeak N con 0–100 undef undef set by coll graph KB per min
(inactive by
Indicates the peak rate of responses in kilobytes per default)
minute during a one-minute collection interval.

Collector: accessLogMonitor
responseSizePeakPercent N con 0–100 97–100 undef set by coll graph ratio of the rate of
warn ALL responses the
Indicates the ratio of the size of this response instance peak rate of ALL
(responseSize parameter) to the peak size of all responses responses
(responseSizePeak parameter).

Collector: accessLogMonitor
responseSizePercent Y con 0–100 97–100 undef set by coll graph ratio of response
warn instances to the rate
Indicates the ratio of the size of this response instance to of all responses
the size of all responses.

Collector: accessLogMonitor
INET_Web_User Application Class
procTime N con 0–100 NA NA set by coll graph msec
(inactive by
Reports the total processing time of the request. default)

Collector: accessLogMonitor

PATROL Parameter Reference Manual 369

PATROL Parameter Reference Manual 370

Table 14 PATROL Internet Server Manager 6.2.00 (Part 52 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
procTimeAverage N con 0–100 NA NA set by coll graph msec
(inactive by
Reports the average processing time of requests. default)

Collector: accessLogMonitor
procTimePercent N con 0–100 NA NA set by coll graph percentage of
(inactive by processing time for
Reports the percentage of the processing time of ALL default) all requests
requests.

Collector: accessLogMonitor
requestRatePerHour Y con 0–100 NA NA set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-hour interval.

Collector: accessLogMonitor
requestRatePerMinute Y con 0–100 NA NA set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-minute interval.

Collector: accessLogMonitor
requestRatePerSec Y con 0–100 NA NA set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-second interval.

Collector: accessLogMonitor
requests Y con 0–100 NA NA set by coll graph requests per min
(inactive by
Indicates the number of requests to the server in a one- default)
minute interval.

Collector: accessLogMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 53 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
requestsPeak N con 0–100 NA NA set by coll graph requests per min
(inactive by
Indicates the peak rate at which requests were received default)
by the server during a one-minute collections interval.

Collector: accessLogMonitor
requestsPeakPercent N con 0–100 97–100 NA set by coll graph ratio of the rate of
warn requests to the peak
Reports the ratio of the rate of requests (requests rate of requests
parameter) to the peak rate of requests (requestsPeak
parameter).

Collector: accessLogMonitor
requestsPercent Y con 0–100 NA NA set by coll graph ratio of request
instances to all
Reports the ratio of the number of requests for this requests
request instance to the number of all requests.

Collector: accessLogMonitor
responseSize Y con 0–100 NA NA set by coll graph KB per min

Indicates the size of responses processed by the server in

kilobytes per minute.

Collector: accessLogMonitor
responseSizeAverage Y con 0–100 NA NA set by coll graph KB
(inactive by
Indicates the average size of responses processed by the default)
server during a one-minute interval.

Collector: accessLogMonitor

PATROL Parameter Reference Manual 371

PATROL Parameter Reference Manual 372

Table 14 PATROL Internet Server Manager 6.2.00 (Part 54 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
responseSizePeak N con 0–100 NA NA set by coll graph KB per min
(inactive by
Indicates the peak size of responses in kilobytes per default)
minute during a one-minute collection interval.

Collector: accessLogMonitor
responseSizePeakPercent N con 0–100 97–100 NA set by coll graph ratio of the rate of
warn ALL responses to the
Indicates the ratio of the size of this response instance peak rate of ALL
(responseSize parameter) to the peak size of all responses responses
(responseSizePeak parameter).

Collector: accessLogMonitor
responseSizePercent Y con 0–100 97–100 NA set by coll graph ratio of response
warn instances the rate of
Indicates the ratio of the size of this response instance to all responses
the size of all responses.

Collector: accessLogMonitor
INET_Web_VirtualServer Application Class
procTime N con 0–100 NA NA set by coll graph msec
(inactive by
Reports the total processing time of the request. default)

Collector: accessLogMonitor
procTimeAverage N con 0–100 NA NA set by coll graph msec
(inactive by
Reports the average processing time of requests. default)

Collector: accessLogMonitor
procTimePercent N con 0–100 NA NA set by coll graph percentage of
(inactive by processing time
Reports the percentage of the processing time of requests. default)

Collector: accessLogMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 55 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
requestRatePerHour Y con 0–100 NA NA set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-hour interval.

Collector: accessLogMonitor
requestRatePerMinute Y con 0–100 NA NA set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-minute interval.

Collector: accessLogMonitor
requestRatePerSec Y con 0–100 NA NA set by coll graph number of requests
(inactive by
Indicates the rate at which requests were received by the default)
server during a one-second interval.

Collector: accessLogMonitor
requests Y con 0–100 NA NA set by coll graph number of requests
(inactive by
Indicates the number of requests to the server in a one- default)
minute interval.

Collector: accessLogMonitor
requestsPeak N con 0–100 NA NA set by coll graph requests per min
(inactive by
Indicates the peak rate at which requests were received default)
by the server during a one-minute collections interval.

Collector: accessLogMonitor

PATROL Parameter Reference Manual 373

PATROL Parameter Reference Manual 374

Table 14 PATROL Internet Server Manager 6.2.00 (Part 56 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
requestsPeakPercent N con 0–100 97–100 NA set by coll graph ratio of the rate of
warn requests to the peak
Reports the ratio of the rate of requests (requests rate of requests
parameter) to the peak rate of requests (requestsPeak
parameter).

Collector: accessLogMonitor
requestsPercent Y con 0–100 NA NA set by coll graph ratio of request
instances the number
Reports the ratio of the number of requests for this of all requests
request instance to the number of all requests.

Collector: accessLogMonitor
responseSize Y con 0–100 NA NA set by coll graph KB per min

Indicates the size of responses processed by the server in

kilobytes per minute.

Collector: accessLogMonitor
responseSizeAverage Y con 0–100 NA NA set by coll graph KB
(inactive by
Indicates the average size of responses processed by the default)
server during a one-minute interval.

Collector: accessLogMonitor
responseSizePeak N con 0–100 NA NA set by coll graph KB per min
(inactive by
Indicates the peak rate of responses in kilobytes per default)
minute during a one-minute collection interval.

Collector: accessLogMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 57 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
responseSizePeakPercent N con 0–100 97–100 NA set by coll graph ratio of the rate of all
warn responses to the peak
Indicates the ratio of the size of this response instance rate of all responses
(responseSize parameter) to the peak size of all responses
(responseSizePeak parameter).

Collector: accessLogMonitor
responseSizePercent Y con 0–100 97–100 NA set by coll graph ratio of response
warn instances the rate of
Indicates the ratio of the size of this response instance to all responses
the size of all responses.

Collector: accessLogMonitor
INET_Websvc_Inst Application Class
wsvcAvailability N con inactive by NA NA set by coll gauge percentage of the
default Web service’s
Displays the percentage of the Web service’s operations operations
with an OK state.

Collector: wsvcMonitor
wsvcMonitor N coll 0–1 1–1 NA 180 sec text NA
(inactive by
Collects all availability and performance data for Web default)
services consumer parameters in the Websvc_Inst and
Websvc_Operation application classes.
wsvcResponseTime N con inactive by NA NA set by coll graph msec
default
Displays the average response time of the Web service’s
operations.

Collector: wsvcMonitor

PATROL Parameter Reference Manual 375

PATROL Parameter Reference Manual 376

Table 14 PATROL Internet Server Manager 6.2.00 (Part 58 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
wsvcResponseTimeStdDeviation N con inactive by 2–3 3–10 set by coll graph number of standard
default warn alarm deviations
Standard deviation of response time for the Web service.
This parameter contains the number of standard
deviations above the average for the current value. This
parameter is not populated (has no value) if there are less
than 40 historical data points. The alarm is triggered only
if the standard deviation is above the threshold for 3 or
more consecutive collection cycles.

Collector: wsvcMonitor
wsvcStatus N con 0–1 1–1 inactive by set by coll stoplight 0 - good,
alarm default 1 - bad
Indicates the availability of all operations in a Web
service. This parameter reflects the worst status among all
operations in a monitored Web service. If any one
operation is unavailable, this parameter will show a
status of unavailable.

Collector: wsvcMonitor
INET_Websvc_Operation Application Class
wsvcOpContent N con NA NA NA set by coll text NA

Displays response content from the Web service

operation.

Collector: wsvcMonitor
Table 14 PATROL Internet Server Manager 6.2.00 (Part 59 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
wsvcOpContentStatus N con 0–1 1–1 inactive by set by coll stoplight 0 - good,
alarm default 1 - bad
Indicates whether a response meets criteria defined by
the Content Check menu command. If the response meets
criteria, it has a status of OK. if it does not, it has a status
of ALARM. This parameter is inactive until the Content
Check is enabled for the monitored Web service
operation.

Collector: wsvcMonitor
wsvcOpDownTime N con 0–1000 1–180 180–1000 set by coll graph sec

Displays the number of seconds that a Web service was

available.

Collector: wsvcMonitor
wsvcOpResponseTime N con inactive by inactive by inactive by set by coll graph msec
default default default
Displays the response time of a Web service operation.

Collector: wsvcMonitor
wsvcOpResponseTimeStdDeviation N con inactive by 2–3 3–10 set by coll graph number of standard
default warn alarm deviations
Standard deviation of response time for the Web service
operation. This parameter contains the number of
standard deviations above the average for the current
value. This parameter is not populated (has no value) if
there are less than 40 historical data points. The alarm is
triggered only if the standard deviation is above the
threshold for 3 or more consecutive collection cycles.

Collector: wsvcMonitor

PATROL Parameter Reference Manual 377

PATROL Parameter Reference Manual 378

Table 14 PATROL Internet Server Manager 6.2.00 (Part 60 of 60)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
wsvcOpStatus N con 0–1 1–1 inactive by set by coll stoplight 0 - good,
alarm default 1 - bad
Indicates the availability of the Web service operation.
This parameter indicates whether the operation is
responding (OK state) or not (Alarm state). SOAP fault
code is provided in annotations, if available.

Collector: wsvcMonitor
INET_Websvc_Top Application Class
wsvcCollectorStatus N con 0–1 1–1 inactive by set by coll state bool 0 - good,
default 1 - bad
Indicates the status of communication between KM
scripts (discovery and collectors) and the tomcat web
server. The parameter is set by INET_Websvc_Top.km
discovery and is annotated with any error messages
produced by tomcat.

Collector: discovery
PATROL for iSeries 3.2.10

Table 15 PATROL for iSeries 3.2.10 (Part 1 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OS400_ACTJOBS Application Class
_Nbr_Above_CPU Y con undef undef undef set by coll graph number of active jobs

Displays the number of active jobs above the CPU

threshold.

Collector: OS400ACTJOBSCol
_Nbr_Act_Jobs Y con undef undef undef set by coll graph number of active jobs

Displays the number of active jobs.

Collector: OS400ACTJOBSCol
_Nbr_Matching_Status Y con undef undef undef set by coll graph number of active jobs

Displays the number of active jobs with matching status.

Collector: OS400ACTJOBSCol
OS400_ASP Application Class
Avg_Arm_Util Y con 0–100 40–60 60–100 set by coll graph percentage of unit
warn alarm processor utilization
Indicates the average percentage of unit processor
utilization.

Collector: OS400ASPCol

PATROL Parameter Reference Manual 379

PATROL Parameter Reference Manual 380

Table 15 PATROL for iSeries 3.2.10 (Part 2 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IO_Size Y con undef undef undef set by coll graph KB

Indicates the average size of I/O requests.

Collector: OS400ASPCol
Nbr_Busy_Arms Y con 0–1000 1–1000 1000–1000 set by coll graph number of disk arms
warn alarm
Displays the number of disk arms with processor
utilization above the user-specified threshold.

Collector: OS400ASPCol
Nbr_Failed_Arms Y con 0–1000 1–1 1–1000 set by coll graph number of disk arms
warn alarm
Displays the number of disk arms reporting failure.

Collector: OS400ASPCol
Nbr_IOs Y con undef undef undef set by coll graph number of requests

Displays the total number of I/O requests.

Collector: OS400ASPCol
Nbr_Reads Y con undef undef undef set by coll graph number of requests

Indicates the number of read requests.

Collector: OS400ASPCol
Nbr_Writes Y con undef undef undef set by coll graph number of requests

Displays the number of write requests.

Collector: OS400ASPCol
Table 15 PATROL for iSeries 3.2.10 (Part 3 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Read_Size Y con undef undef undef set by coll graph KB

Displays the average size of the read requests.

Collector: OS400ASPCol
Space_Used Y con 0–100 95–97 97–100 set by coll graph percentage of space
warn alarm used
Displays the percentage of space used.

Collector: OS400ASPCol
Write_Size Y con undef undef undef set by coll graph KB

Displays the average size of the write requests.

Collector: OS400ASPCol
OS400_BATCH Application Class
Num_Batch_Ending Y con undef undef undef set by coll graph number of batch jobs

Displays the number of batch jobs ending.

Collector: OS400BATCHCol
Num_Batch_Held_onQ Y con undef undef undef set by coll graph number of batch jobs

Displays the number of batch jobs held on a job queue.

Collector: OS400BATCHCol
Num_Batch_Held_Run Y con undef undef undef set by coll graph number of batch jobs

Displays the number of batch jobs held while running.

Collector: OS400BATCHCol

PATROL Parameter Reference Manual 381

PATROL Parameter Reference Manual 382

Table 15 PATROL for iSeries 3.2.10 (Part 4 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Num_Batch_Msg_Wait Y con undef undef undef set by coll graph number of batch jobs

Displays the number of batch jobs waiting for messages.

Collector: OS400BATCHCol
Num_Batch_on_HeldQ Y con undef undef undef set by coll graph number of batch jobs

Displays the number of batch jobs waiting on a held job

queue.

Collector: OS400BATCHCol
Num_Batch_on_UnassignedQ Y con undef undef undef set by coll graph number of batch jobs

Displays the number of batch jobs waiting on an

unassigned job queue.

Collector: OS400BATCHCol
Num_Batch_Running Y con undef undef undef set by coll graph number of batch jobs

Displays the number of running batch jobs.

Collector: OS400BATCHCol
Num_Batch_Waiting_to_Run Y con undef undef undef set by coll graph number of batch jobs

Displays the number of batch jobs waiting to run.

Collector: OS400BATCHCol
OS400_CFGDESC Application Class
There are no parameters associated with the OS400_CFGDESC Application Class.
Table 15 PATROL for iSeries 3.2.10 (Part 5 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OS400_CFGREPORTS Application Class
Report_cfg_count Y con undef undef undef set by coll graph number of report
items
Displays the number of report items.

Collector: OS400_CFGDESC discovery

OS400_CONNECTION Application Class
_ConnectionCol Y coll NA undef undef set by coll NA NA

Collects connection information.

_Nbr_Connections Y con NA undef undef set by coll graph number of
connections
Displays the total number of connections to the system.

Collector: _ConnectionCol
OS400_CONNECTIONID Application Class
Bytes_Sent Y con undef undef undef set by coll graph bytes

Displays the total number of bytes sent to the remote host

by all qualifying connections since they were established.

Collector: _ConnectionCol
Bytes_Received Y con undef undef undef set by coll graph bytes

Displays the total number of bytes received from the

remote host by all qualifying connections since they were
established.

Collector: _ConnectionCol

PATROL Parameter Reference Manual 383

PATROL Parameter Reference Manual 384

Table 15 PATROL for iSeries 3.2.10 (Part 6 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Max_Idle_Time Y con undef undef undef set by coll graph sec

Displays the idle time, in seconds, of the qualifying

connection that has been idle for the longest time.

Collector: _ConnectionCol
Max_State_Code Y con undef undef undef set by coll graph NA

Displays the maximum status code for the qualifying

connections.

Collector: _ConnectionCol
Nbr_Connections Y con undef undef undef set by coll graph number of
connections
Displays the number of connections that match the
criteria entered for this connection ID.

Collector: _ConnectionCol
OS400_DCM Application Class
DCM_Alert Y con 0–1 1–1 undef set by coll graph none
warn
Indicates whether the DCM is active.

Collector: OS400DCMCol
OS400ACTJOBSCol Y coll NA NA NA 1 min text none

Gathers all of the parameters and variables for active and

monitored jobs (in the Active Jobs application class) and
some of the parameters and variables for the System
application class.
OS400ASPCol Y coll NA NA NA 5 min text none

Gathers all of the parameters and variables for the ASP

application class.
Table 15 PATROL for iSeries 3.2.10 (Part 7 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OS400BATCHCol Y coll NA NA NA 5 min text none

Gathers all of the parameters and variables for the Batch

application class.
OS400DCMCol Y coll NA NA NA 30 sec text none

Starts the DCM and establishes communication with the

resulting process.
OS400POOLCol Y coll NA NA NA 5 min text none

Gathers all of the parameters and variables for the Main

Storage Pools application class.
OS400SUBSYSCol Y coll NA NA NA 3 min text none

Gathers all of the parameters and variables for the

Subsystem application class.
OS400SYSTEMCol Y coll NA NA NA 1 min text none

Gathers the majority of the parameters and variables for

the System application class.
OS400USERCol Y coll NA NA NA 5 min text none

Gathers all of the parameters and variables for the User

application class.
OS400_IFS Application Class
There are no parameters associated with the OS400_IFS Application Class.
OS400_INTERFACE Application Class
_InterfaceCol Y coll undef undef undef 1 min NA NA

Collects interface information.

PATROL Parameter Reference Manual 385

PATROL Parameter Reference Manual 386

Table 15 PATROL for iSeries 3.2.10 (Part 8 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
_Nbr_Act_Interfaces Y con undef undef undef set by coll graph number of interfaces

Displays the number of interfaces found on the system

with a status of Active or Starting.

Collector: _InterfaceCol
OS400_JOBID Application Class
CPU Y con undef undef undef set by coll graph percentage of CPU
utilization
Displays the total CPU utilization for all active jobs
matching the selection criteria for this job ID.

Collector: OS400ACTJOBSCol
IO Y con undef undef undef set by coll graph I/Os

Displays the total I/O for all active jobs matching the
selection criteria for this job ID

Collector: OS400ACTJOBSCol
Max_status_code Y con undef undef undef set by coll graph status code

Displays the maximum status code found among all the

active jobs matching the monitoring criteria. This
parameter is not updated when there are no jobs
matching the monitoring criteria.

Collector: OS400ACTJOBSCol
Min_status_code Y con undef undef undef set by coll graph status code

Displays the minimum status code found among all the

active jobs matching the monitoring criteria. This
parameter is not updated when there are no jobs
matching the monitoring criteria.

Collector: OS400ACTJOBSCol
Table 15 PATROL for iSeries 3.2.10 (Part 9 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Nbr_Act_Jobs Y con undef undef undef set by coll graph number of active jobs

Displays the number of active jobs matching the selection

criteria for this job ID.

Collector: OS400ACTJOBSCol
Resp Y con undef undef undef set by coll graph sec

Displays the average interactive response time for all

interactive jobs, matching the selection criteria for this job
ID.

Collector: OS400ACTJOBSCol
Trans Y con undef undef undef set by coll graph number of
transactions
Displays the total number of transactions for all
interactive jobs matching the selection criteria for this job
ID.

Collector: OS400ACTJOBSCol
OS400_JOBQ Application Class
_Nbr_HeldQs_wJobs Y con NA undef undef set by coll graph number of job queues

Displays the number of held job queues with jobs.

Collector: OS400_JOBQ discovery

_Nbr_JobQs_wJobs Y con NA undef undef set by coll graph number of job queues

Displays the number of job queues with jobs.

Collector: OS400_JOBQ discovery

PATROL Parameter Reference Manual 387

PATROL Parameter Reference Manual 388

Table 15 PATROL for iSeries 3.2.10 (Part 10 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
_Nbr_UnassignQs_wJobs Y con NA undef undef set by coll graph number of job queues

Displays the number of job queues not assigned to an

active subsystem with jobs.

Collector: OS400_JOBQ discovery

OS400_LIBRARY Application Class
There are no parameters associated with the OS400_LIBRAR Application Class.
OS400_MONIFS Application Class
_IFSCol Y coll NA NA NA 1 min NA NA

Collects the size and count information for this path

entry.
IFS_Nbr_Objects Y con undef undef undef set by coll graph number of objects

Displays the total number of monitored objects in this

path.

Collector: _IFSCol
IFS_Nbr_Large_Objects Y con undef undef undef set by coll graph number of objects

Displays the total number of monitored objects in this

path that are larger than the specified threshold.

Collector: _IFSCol
IFS_Size Y con undef undef undef set by coll graph MB

Displays the cumulative size of the monitored objects in

this path.

Collector: _IFSCol
Table 15 PATROL for iSeries 3.2.10 (Part 11 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OS400_MONINTERFACE Application Class
Bytes_Sent Y con undef undef undef set by coll graph KB

Displays the number of bytes transmitted out of the

interface since the last interval, including framing
characters.

Collector: _InterfaceCol
Bytes_Received Y con undef undef undef set by coll graph KB

Displays the number of bytes received on the interface

since the last interval, including framing characters.

Collector: _InterfaceCol
Interface_Out_Pax_Disc Y con undef undef undef set by coll graph number of packets

Displays the number of outbound packets which were

chosen to be discarded since the last interval even though
no errors had been detected to prevent their being
transmitted.

Collector: _InterfaceCol
Interface_In_Pax_Disc Y con undef undef undef set by coll graph number of packets

Displays the number of inbound packets which were

chosen to be discarded since the last interval even though
no errors had been detected to prevent their being
delivered to a higher-layer protocol.

Collector: _InterfaceCol

PATROL Parameter Reference Manual 389

PATROL Parameter Reference Manual 390

Table 15 PATROL for iSeries 3.2.10 (Part 12 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Interface_Pax_Sent Y con undef undef undef set by coll graph number of packets

Displays the total number of packets that higher-level

protocols requested to be transmitted to a unicast
(broadcast or multicast) address since the last interval,
including those that were discarded or not sent.

Collector: _InterfaceCol
Interface_Pax_Received Y con undef undef undef set by coll graph number of packets

Displays the number of unicast and non-unicast

(broadcast or multicast) packets delivered to a higher-
layer protocol since the last interval.

Collector: _InterfaceCol
Interface_Phy_Status_Code Y con 0–7 undef undef set by coll graph 0 - Unkown,
1 - Active,
Displays the status code value representing the current 2 - Inactive,
operational state of the physical interface (line). 3 - Failed,
4 - Starting,
Collector: _InterfaceCol 5 - Ending,
6 - Recovery Pending,
7 - Recovery
Canceled
Interface_Lgl_Status_Code Y con 0–8 undef undef set by coll graph 0 - Inactive,
1 - Active,
Displays the current status of the logical interface. 2 - Starting,
3 - Ending,
Collector: _InterfaceCol 4 - RCYPND
(Recovery Pending),
5 - RCYCNL
(Recovery Canceled),
6 - Failed,
7 - Failed (TCP),
8 - Dial-on-Demand–
Point-to-Point
Table 15 PATROL for iSeries 3.2.10 (Part 13 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OS400_MONITOREDCFG Application Class
Status_Code Y con 0–113 undef undef set by coll graph code number

Displays the status code for the configuration description.

Collector: OS400_CFGDESC discovery

OS400_MONITOREDJOBQ Application Class
Nbr_Jobs Y con undef undef undef set by coll graph number of jobs

Displays the number of jobs in the job queue.

Collector: OS400_JOBQ discovery

Status_Code Y con undef undef undef set by coll graph status code

Displays the status of the job queue.

Collector: OS400_JOBQ discovery

OS400_MONITOREDJOBS Application Class
CPU Y con 0–100 85–90 90–100 set by coll graph percentage of CPU
warn alarm used by the job
Displays the percentage of the CPU used by the job.

Collector: OS400ACTJOBSCol
Elapsed_Seconds Y con undef undef undef set by coll graph sec

Displays the number of seconds since the job began

running on the system. The number resets to 0 when the
job becomes inactive.

Collector: OS400ACTJOBSCol

PATROL Parameter Reference Manual 391

PATROL Parameter Reference Manual 392

Table 15 PATROL for iSeries 3.2.10 (Part 14 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IO Y con undef undef undef set by coll graph number of I/Os

Displays the number of I/Os for the job during the

interval. This parameter is for monitored jobs only.

Collector: OS400ACTJOBSCol
Resp Y con undef undef undef set by coll graph sec

Displays the average interactive response time for the job

during the interval.This parameter is for interactive jobs
only.

Collector: OS400ACTJOBSCol
Status_Code Y con undef undef undef set by coll graph code number

Displays the status code for the job. This parameter is for
monitored jobs only.

Collector: OS400ACTJOBSCol
Trans Y con undef undef undef set by coll graph number of
transactions
Displays the number of transactions for the job during the
interval. This parameter is for interactive jobs only.

Collector: OS400ACTJOBSCol
OS400_MONITOREDLIBS Application Class
Number_objects Y con undef undef undef set by coll graph number of objects

Displays the number of objects in the library.

Collector: OS400_MONITOREDLIBS discovery

Table 15 PATROL for iSeries 3.2.10 (Part 15 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Size Y con undef undef undef set by coll graph MB

Displays the size of the library, in megabytes.

Collector: OS400_MONITOREDLIBS discovery

OS400_MONITOREDMSG Application Class
Match_msgs Y con undef undef undef set by coll graph number of messages

Displays the number of new messages that satisfy the

user-specified message selection criteria.

Collector: OS400_MSG discovery

New_msgs Y con undef undef undef set by coll graph number of messages

Displays the number of new messages that arrived in the

queue during the interval.

Collector: OS400_MSG discovery

Replies_sent Y con undef undef undef set by coll graph number of messages

Displays the number of replies sent automatically.

Collector: OS400_MSG discovery

Reply_msgs Y con undef undef undef set by coll graph number of messages

Displays the number of messages waiting for a reply.

Collector: OS400_MSG discovery

OS400_MONITOREDOBJS Application Class
Size Y con undef undef undef set by coll graph KB

Displays the size of the object.

Collector: OS400_OBJECTS discovery

PATROL Parameter Reference Manual 393

PATROL Parameter Reference Manual 394

Table 15 PATROL for iSeries 3.2.10 (Part 16 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Status code Y con undef undef undef set by coll graph code number

Displays the status of the object.

Collector: OS400_OBJECTS discovery

OS400_MSG Application Class
There are no parameters associated with the OS400_MSG Application Class.
OS400_NETSTAT Application Class
There are no parameters associated with the OS400_NETSTAT Application Class.
OS400_OBJECTID Application Class
Average_Size Y con undef undef undef set by coll graph KB

Displays the average size (in kilobytes) of all objects

matching the selection criteria.

Collector: OS400_OBJECTS discovery

Count Y con undef undef undef set by coll graph number of objects

Displays the number of objects matching the selection

criteria.

Collector: OS400_OBJECTS discovery

Maximum_Size Y con undef undef undef set by coll graph KB

Displays the size (in kilobytes) of the largest object that

matches the selection criteria for this ID, with a status of
OK.

Collector: OS400_OBJECTS discovery

Table 15 PATROL for iSeries 3.2.10 (Part 17 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Minimum_Size Y con undef undef undef set by coll graph KB

Displays the size (in kilobytes) of the smallest object that

matches the selection criteria for this ID, with a status of
OK.

Collector: OS400_OBJECTS discovery

Total_Size Y con undef undef undef set by coll graph KB

Displays the total size of all objects matching the selection

criteria.

Collector: OS400_OBJECTS discovery

Worst Status Code Y con undef undef undef set by coll graph number of users

Displays the worst (greatest) status code found among

the objects that match the selection criteria for this ID.
This parameter is not updated when there are no jobs
matching the monitoring criteria.

Collector: OS400_OBJECTS discovery

OS400_OBJECTS Application Class
There are no parameters associated with the OS400_OBJECTS Application Class.
OS400_POOL Application Class
Active_to_Inel Y con undef undef undef set by coll graph number of transitions

Displays the number of active-to-ineligible transitions.

Collector: OS400POOLCol
Active_to_Wait Y con undef undef undef set by coll graph number of transitions

Displays the number of active-to-wait transitions.

Collector: OS400POOLCol

PATROL Parameter Reference Manual 395

PATROL Parameter Reference Manual 396

Table 15 PATROL for iSeries 3.2.10 (Part 18 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DB_Faults Y con undef undef undef set by coll graph number of faults

Displays the number of database faults.

Collector: OS400POOLCol
DB_Pages Y con undef undef undef set by coll graph number of pages

Displays the number of database pages.

Collector: OS400POOLCol
NonDB_Faults Y con undef undef undef set by coll graph number of faults

Displays the number of non-database faults.

Collector: OS400POOLCol
NonDB_Pages Y con undef undef undef set by coll graph number of pages

Displays the number of non-database pages.

Collector: OS400POOLCol
Size Y con undef undef undef set by coll graph KB

Displays the pool size, in kilobytes.

Collector: OS400POOLCol
Wait_to_Inel Y con undef undef undef set by coll graph number of transitions

Displays the number of wait-to-ineligible transitions.

Collector: OS400POOLCol
Table 15 PATROL for iSeries 3.2.10 (Part 19 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OS400_QHST Application Class
_Nbr_Abend_Jobs Y con undef undef undef set by coll graph number of jobs

Displays the number of abnormally ended jobs found

during this collection interval. A job is considered to have
ended abnormally if its End Code is at least greater than
or equal to the threshold specified on the Track
Abnormally Ended Jobs dialog box.

Collector: _QHSTCol
_Nbr_Critical_Abend_Jobs Y con undef undef undef set by coll graph number of jobs

Displays the number of abnormally ended critical jobs as

specified as part of the Track Abnormally Ended Jobs KM
command as specified on the Track Abnormally Ended
Jobs dialog box.

Collector: _QHSTCol
_Nbr_SysVal_Changes Y con undef undef undef undef graph number of changes

Displays the number of system value changes detected

during the interval.

Collector: _QHSTCol
_QHSTCol Y coll NA NA NA 5 min graph NA

Processes history log messages.

OS400_QHSTID Application Class
Nbr_Match_Msgs Y con undef undef undef set by coll graph number of messages

Displays the number of new messages that satisfy the

user-specified selection criteria for this history log ID.

Collector: _QHSTCol

PATROL Parameter Reference Manual 397

PATROL Parameter Reference Manual 398

Table 15 PATROL for iSeries 3.2.10 (Part 20 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OS400_ROUTE Application Class
_Nbr_Avail_Routes Y con undef undef undef set by coll graph number of routes

Displays the number of currently available routes on the

system.

Collector: _RouteCol
_RouteCol Y coll NA NA NA 1 min NA NA

Collects route information.

OS400_ROUTEv4 Application Class
Route_Interface_Status_Code Y con 0–9 undef undef set by coll graph 0 - Inactive,
1 - Active,
Displays the status code of the logical interface to which 2 - Starting,
this route is bound. 3 - Ending,
4 - RCYPND
Collector: _RouteCol (Recovery Pending),
5 - RCYCNL
(Recovery Canceled),
6 - Failed,
7 - Failed (TCP),
8 - Dial-on-Demand–
Point-to-Point,
9 - Active Duplicate
IP Address Conflict
Route_v4_Status_Code Y con undef undef undef set by coll graph 1 - Yes,
2 - No,
Displays the status code of the route. 3 - Dial-on-Demand–
Point-to-Point,
Collector: _RouteCol 4 - No Gateway
Table 15 PATROL for iSeries 3.2.10 (Part 21 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OS400_SUBSYS Application Class
Active_Jobs Y con undef undef undef set by coll graph number of jobs

Displays the number of active jobs in the subsystem.

Collector: OS400SUBSYSCol
Status_Code Y con undef undef undef set by coll graph code number

Displays the status of the subsystem.

Collector: OS400SUBSYSCol
OS400_SYSTEM Application Class
CPU_Util Y con 0–100 85–95 95–100 set by coll graph percentage of CPU
warn alarm utilization
Displays the total percentage of CPU utilization.

Collector: OS400SYSTEMCol
Inter_resp Y con undef undef undef set by coll graph time

Displays the average internal interactive response time.

Collector: OS400SYSTEMCol
Inter_trans Y con undef undef undef set by coll graph number of
transactions
Displays the number of interactive transactions.

Collector: OS400SYSTEMCol
Inter_util Y con 0–100 65–85 85–100 set by coll graph percentage of CPU
warn alarm utilization
Displays the percentage of CPU utilization due to
interactive work.

Collector: OS400SYSTEMCol

PATROL Parameter Reference Manual 399

PATROL Parameter Reference Manual 400

Table 15 PATROL for iSeries 3.2.10 (Part 22 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Perc_Perm_Addr_Used Y con 0–100 95–97 97–100 set by coll graph percentage of
warn alarm maximum possible
Displays the percentage used of maximum possible addresses
addresses for permanent objects.

Collector: OS400SYSTEMCol
Perc_Tmp_Addr_Used Y con 0–100 70–95 95–100 set by coll graph percentage of
warn alarm maximum possible
Displays the percentage used of maximum possible addresses
addresses for temporary objects.

Collector: OS400SYSTEMCol
Tot_ASP_Stg_Used Y con 0–100 95–97 97–100 set by coll graph percentage of system
warn alarm ASP storage
Displays the percentage of the system ASP storage used.

Collector: OS400SYSTEMCol
Tot_Jobs_in_System Y con undef undef undef set by coll graph number of jobs

Displays the total number of jobs in the system.

Collector: OS400SYSTEMCol
OS400_USER Application Class
Num_Jobs_Group_Susp Y con undef undef undef set by coll graph number of jobs

Displays the number of suspended group jobs.

Collector: OS400USERCol
Num_Jobs_Off_wPrint Y con undef undef undef set by coll graph number of jobs

Displays the number of jobs signed off with print

pending.

Collector: OS400USERCol
Table 15 PATROL for iSeries 3.2.10 (Part 23 of 23)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Num_Jobs_Suspended Y con undef undef undef set by coll graph number of jobs

Displays the number of jobs suspended.

Collector: OS400USERCol
Num_Jobs_SysReq_Susp Y con undef undef undef set by coll graph number of jobs

Displays the number of jobs suspended by System

Request.

Collector: OS400USERCol
Num_Temp_Signed_Off Y con undef undef undef set by coll graph number of users

Displays the number of users temporarily signed off.

Collector: OS400USERCol
Num_Users_Signed_On Y con undef undef undef set by coll graph number of users

Displays the number of users signed on.

Collector: OS400USERCol

PATROL Parameter Reference Manual 401

PATROL Parameter Reference Manual 402
PATROL KM for Log Management 2.0.01

Table 16 PATROL KM for Log Management 2.0.01 (Part 1 of 3)

List of Output
Installation

Scheduling
(Poll Time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
LOG Application Class
LOGMainColl Y coll NA NA NA 2 min none NA

Parameter has no icon and is used internally by the

PATROL KM for LOG Management application.
LOGMainCollP2 Y coll NA NA NA 10 min none NA

Parameter has no icon and is used internally by the

PATROL KM for LOG Management application.
LOGMainCollP3 Y coll NA NA NA 30 min none NA

Parameter has no icon and is used internally by the

PATROL KM for LOG Management application.
LOGMON Application Class
LOGErrorLvl Y con 0–3 2–2 3–3 set by coll graph alert level
warn alarm Possible alert severity
Displays the alert severity of a monitored log file when its levels are:
specified search string is found. 0 - none or no alarm
1 - informational or
Collector: NA OK
2 - warn
3 - alarm

PATROL Parameter Reference Manual 403

PATROL Parameter Reference Manual 404

Table 16 PATROL KM for Log Management 2.0.01 (Part 2 of 3)

List of Output
Installation

Scheduling
(Poll Time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
LOGFileSize Y con undef undef undef set by coll graph bytes

Displays the size of the log file that you are monitoring.
This is an important parameter to monitor because log
files usually grow continuously and can often grow large
enough to cause problems before you remember to purge
old log data.

Collector: NA
LOGGrowthRate Y con undef undef undef set by coll graph bytes per min

Displays the growth rate of the log file to graph changes

in the size of the log file over time. PATROL determines
the LOGGrowthRate by calculating the change of the
LOGFileSize parameter over time. If the LOGFileSize
parameter is inactive, the value of LOGGrowthRate will
be inaccurate.

Collector: NA
LOGMatchString Y con NA NA NA set by coll text NA

Displays the string that matched the regular expression

defined in the log search.

Collector: NA
LOGMONRecoveryColl Y con NA NA NA 10 min none NA

Parameter has no icon and is used internally by the

PATROL KM for LOG Management application.

Collector: NA
Table 16 PATROL KM for Log Management 2.0.01 (Part 3 of 3)

List of Output
Installation

Scheduling
(Poll Time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
LOGSearchString Y con undef undef undef set by coll graph number of search
string matches
Displays the number of search string matches found
during the last scanning cycle.

Collector: NA
LOGStatus Y con none 0–0 3–4 NA graph status of the log file
alarm alarm 0 - missing or
Displays the status of the monitored log. unknown
1 - OK
Collector: LOGMainColl 2 - modified
3 - read error
4 - inactive

PATROL Parameter Reference Manual 405

PATROL Parameter Reference Manual 406
PATROL for Lotus Domino 4.5.00

Table 17 PATROL for Lotus Domino 4.5.00 (Part 1 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTES_DB Application Class
ACLMonitor Y con 0-0 0-0 0-0 set by coll graph number of changes
alarm OK OK
Indicates the number of changes in the Access Control (inactive by (inactive by
List (ACL). default) default)

Collector: NOTES_DB/Discovery
CONFIGURATION Y coll NA NA NA 5 min NA none

Loads database configuration information.

DBContent Y std 0-100 0-100 100-100 23 hrs, 59 min, 59 graph number of hits
OK OK OK sec
Scans matching databases and all documents within them (inactive by (inactive by (inactive by
for a given regular expression and displays the content default) default) default)
search results in the System Output Window. This
parameter takes a long time to run, especially on large
databases, because it opens every database document and
scans all its fields to discover instances of the given
words.

PATROL Parameter Reference Manual 407

PATROL Parameter Reference Manual 408

Table 17 PATROL for Lotus Domino 4.5.00 (Part 2 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DBLoad Y con 0-99 75-85 85-99 set by coll graph percentage of load
alarm warn alarm
Indicates whether the response time of the server is fast
or slow (unusable). The administrator can define what
response time is fast and at what point the database
becomes unusable. This parameter derives a database
load figure based on the defined response time. This
figure ensures that responses from 0 to fast are mapped at
0 to 70 percent, and that responses from fast to unusable
are mapped at 70 to 100 percent.

Collector: NOTES_DB/Discovery
DBQuota Y con 0-100 80-90 90-100 set by coll gauge percentage of quota
OK warn alarm
Checks that the database size is within a percentage of its
quota.

Collector: NOTES_DB/Discovery
DBResponse Y std 0-100 0-100 0-100 30 min graph number of seconds
alarm OK OK
Reports the response time to open the instance’s database (inactive by (inactive by
on the server. Response times are plotted at one-minute default) default)
intervals, displaying a positive value that indicates the
response time in seconds.
LNDBSize Y con 0-999999 800000-900000 900000-999999 set by coll graph number of MB
alarm warn alarm
Displays the size of the NSF database.

Collector: NOTES_DB/Discovery
NumDataNotes Y con 0-100 0-100 100-100 set by coll graph number of data notes
OK OK OK or documents
Indicates the number of data notes or documents in each (inactive by (inactive by (inactive by
database. default) default) default)

Collector: NOTES_DB/Discovery
Table 17 PATROL for Lotus Domino 4.5.00 (Part 3 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NumNonDataNotes Y con 0-100 0-100 100-100 set by coll graph number of non-data
OK OK OK (design) notes or
Indicates the number of non-data (design) notes or (inactive by (inactive by (inactive by documents
documents in each database. default) default) default)

Collector: NOTES_DB/Discovery
NumViews Y con 0-0 0-0 0-0 set by coll gauge number of views
OK OK OK (indexes)
Indicates the number of views (indexes) in each database (inactive by (inactive by (inactive by
(includes hidden views). default) default) default)

Collector: NOTES_DB/Discovery
ReplConflicts Y std -1-0 -1 0-0 12 hrs gauge number of replication
warn OK OK conflicts
Displays the total replication conflicts in each database. (inactive by
default)
WeeklyUse Y con 0-100 0-100 100-100 set by coll gauge number of hits
OK OK OK
Indicates the number of weekly hits against each database (inactive by (inactive by (inactive by
by all users and servers. The data displayed by this default) default) default)
parameter depends on the server executing statlog at
regular intervals (at least once per day). Changes to the
database are not reported until statlog executes and the
WeeklyUse parameter is refreshed.

Collector: NOTES_DB/Discovery
WhiteSpace Y con 0-30 0-30 30-30 set by coll gauge percentage of white
alarm OK OK space allocated per
Displays the percentage of white space (allocated but not (inactive by database
used) in each database. The data displayed by this default)
parameter depends on the server executing statlog at
regular intervals at least once a day. Changes to the
database are not reported until statlog executes and
the WhiteSpace parameter is refreshed.

Collector: NOTES_DB/Discovery

PATROL Parameter Reference Manual 409

PATROL Parameter Reference Manual 410

Table 17 PATROL for Lotus Domino 4.5.00 (Part 4 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
WhiteSpaceKb Y con 0-500 0-100 100-100 set by coll gauge number of KB
alarm OK OK
Indicates white space (allocated but not used) in each (inactive by (inactive by
database. The data displayed by this parameter depends default) default)
on the server executing statlog at regular intervals at
least once a day. Changes to the database are not reported
until statlog executes and the WhiteSpaceKb
parameter is refreshed.

Collector: NOTES_DB/Discovery
Table 17 PATROL for Lotus Domino 4.5.00 (Part 5 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTES_DBREPMON Application Class
CountDifferent Y con 0-100 0-100 100-100 set by coll gauge number of
OK OK OK documents
Indicates the number of documents in the compared (inactive by (inactive by (inactive by
databases which are different. default) default) default)

Collector: NOTES_DBREPMON/RepInfoColl
CountSame Y con 0-100 0-100 100-100 set by coll gauge number of
OK OK OK documents
Indicates the number of documents in the compared (inactive by (inactive by (inactive by
databases which are the same. default) default) default)

Collector: NOTES_DBREPMON/RepInfoColl
DestCount Y con 0-100 0-100 100-100 set by coll gauge number of
OK OK OK documents
Indicates the number of documents found in the (inactive by (inactive by (inactive by
destination database. default) default) default)

Collector: NOTES_DBREPMON/RepInfoColl
RepInfoColl Y coll NA NA NA 6 hours none none

Collects and assigns the values of all other DBRepMon

parameters..
ReplicaFound Y con 1-1 1-1 1-1 set by coll boolean 1=Found
alarm OK OK 0=Not Found
Indicates the number of documents in the compared (inactive by (inactive by
databases which are different. default) default)

Collector: NOTES_DBREPMON/RepInfoColl
SrcCount Y con 0-100 0-100 100-100 set by coll gauge number of
OK OK OK documents
Indicates the number of documents in the source (inactive by (inactive by (inactive by
database. default) default) default)

Collector: NOTES_DBREPMON/RepInfoColl

PATROL Parameter Reference Manual 411

PATROL Parameter Reference Manual 412

Table 17 PATROL for Lotus Domino 4.5.00 (Part 6 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Summary Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Text summary for the NOTES_DBREPMON application. (inactive by (inactive by (inactive by
default) default) default)
Collector: NOTES_DBREPMON/RepInfoColl
NOTES_DBVIEWS Application Class
ViewConflicts Y std 0-0 0-0 0-0 30 min gauge number of replication
OK OK OK conflicts
Indicates the number of replication conflicts in the view. (inactive by (inactive by (inactive by
default) default) default)
ViewLoad Y std 0-99 70-85 85-99 30 min graph percentage of load
OK warn alarm
Indicates whether the response time of the server is fast
or slow (unusable). The administrator can define what
response time is fast and at what point the view becomes
unusable. This parameter derives a view load figure
based on the defined response time. This figure ensures
that responses from 0 to fast are mapped at 0 to 70
percent, and that responses from fast to unusable are
mapped at 70 to 100 percent.
ViewNumNotes Y std 0-0 0-0 0-0 30 min graph number of data
OK OK OK (document) notes per
Indicates the number of data (document) notes in the (inactive by (inactive by (inactive by view
view. default) default) default)
ViewResponse Y std 0-60 54-60 60-60 30 min graph number of seconds
alarm warning alarm
Reports the response time to open the instance’s view. (inactive by
Response times are plotted at one-minute intervals, default)
displaying a positive value.
NOTES_DISCOVERY Application Class
CFG_CHANNEL Y std 1-100 1-1 1-1 1 min graph number of channels
alarm OK OK
Indicates the status of the Notes Server channel. (inactive by (inactive by
default) default)
Table 17 PATROL for Lotus Domino 4.5.00 (Part 7 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CFG_Notes_Tasks Y std 1-100 1-3 3-3 30 sec graph number of Domino
alarm warn OK servers
Displays the number of Lotus Domino server binaries (inactive by
that are running on the monitored node. default)
NOTES_DOMINO Application Class
E-mailer N coll NA NA NA 1 hour none none

Generates emails for parameters in alarm. The Server

Configuration Form indicates which parameters to
monitor.

Note: It may take 5 to 10 minutes after starting the KM for

E-Mailer to discover and scan all parameters for alarms.
NOTES_E2E Application Class
E2ECollector Y coll NA NA NA 1 min none none

Collects and assigns the values of all other E2E

application class parameters.
E2EConfiguration Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Displays the E2E configuration values defined in the (inactive by (inactive by (inactive by
Client Monitoring Configuration Document. default) default) default)

Collector: E2ECollector
E2EOperationResults Y con 0-1 0-0 1-1 set by coll gauge number of errors
alarm alarm OK
Displays the result of the E2E Operation, whether it (inactive by (inactive by
executed successfully or was executed with errors. default) default)

Collector: E2ECollector

PATROL Parameter Reference Manual 413

PATROL Parameter Reference Manual 414

Table 17 PATROL for Lotus Domino 4.5.00 (Part 8 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
E2EOperationStatus Y con 0-100 0-100 100-100 set by coll text results of the
OK OK OK operation
Displays the E2E configuration values defined in the (inactive by (inactive by (inactive by
Client Monitoring Configuration Document, plus the default) default) default)
results of executing the E2E operation.

Collector: E2ECollector
E2EPingResponseTime Y con 0-100 0-100 100-100 set by coll gauge number of
OK OK OK milliseconds
Displays the time for the client to ping the selected server. (inactive by (inactive by (inactive by
This parameter is assigned the E2E Response Client to default) default) default)
Server Ping command value.

Collector: E2ECollector
E2EResponseTime Y con 0-1 0-1 1-1 set by coll gauge number of seconds
OK OK OK
Displays the amount of time to perform the E2E (inactive by (inactive by (inactive by
operation, and whether it executed successfully or was default) default) default)
executed with errors.

Collector: E2ECollector
NOTES_EVENTS Application Class
AlarmReportCount Y con 0-100 0-100 100-100 set by coll graph number of alarms
OK OK OK
Reports how many times the server has alarmed on a (inactive by (inactive by (inactive by
specific problem. default) default) default)

Collector: NOTES_EVENTS/DBInfoColl
AlarmSeverity Y con 1-5 1-5 5-5 set by coll gauge none
OK OK OK
Reports the current alarm value status, such as failure, (inactive by (inactive by (inactive by
fatal, normal, etc. default) default) default)

Collector: NOTES_EVENTS/DBInfoColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 9 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AlarmValue Y con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Provides the threshold value assigned to the monitored (inactive by (inactive by (inactive by
statistics. default) default) default)

Collector: NOTES_EVENTS/DBInfoColl
DbInfoColl Y std 0-100 0-100 100-100 5 min none none
OK OK OK
Collects and assigns the values of all other (inactive by (inactive by (inactive by
NOTES_EVENTS parameters. default) default) default)
StatValue Y con -1 -1 -1 set by coll graph none
alarm OK OK
Displays the current value of statistics being monitored. (inactive by (inactive by
default) default)
Collector: NOTES_EVENTS/DBInfoColl
TextReport Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Collects all textual data of the document property. (inactive by (inactive by (inactive by
default) default) default)
Collector: NOTES_EVENTS/DBInfoColl
NOTES_LOG Application Class
LogMonitor Y std 0-0 0-0 0-0 5 min graph number of errors
warn OK OK
Monitors the server log and displays messages that are (inactive by (inactive by
explained in the events4.ntf and events4.nsf default) default)
files. Fatal/failure messages increment the counter and
set off the alarm.
LogReportMonitor Y std 0-0 0-0 0-0 1 min graph number of errors
warn OK OK
Displays all errors found in the log.nsf database for a (inactive by (inactive by
specified view. default) default)

PATROL Parameter Reference Manual 415

PATROL Parameter Reference Manual 416

Table 17 PATROL for Lotus Domino 4.5.00 (Part 10 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LogReportText Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Displays 100 lines of the log report. (inactive by (inactive by (inactive by
default) default) default)
Collector: LogReportMonitor
LogText Y con 0-0 0-0 0-0 set by coll text none
OK OK OK
Displays log text after it has been filtered according to the (inactive by (inactive by (inactive by
Rules section for this log. Only the last 500 lines of text are default) default) default)
displayed.

Collector: LogMonitor
LogWarn N std 0-0 0-0 0-0 5 min graph number of warnings
OK OK OK per hr
Indicates the number of log warnings per hour. Warnings (inactive by (inactive by (inactive by
are generated when a log entry is explained against default) default) default)
events4.ntf and found to be a warning.
NOTES_MAILBOX Application Class
Activity Y std 0-5 1-1 1-1 10 min gauge number of minutes
alarm alarm OK
Indicates the number of mail messages waiting to be (inactive by (inactive by
routed. It tracks all the mail in the view (by note ID) and default) default)
flags the ones that have stayed in the view for more than
the indicated number of parameter executions.
BackupInfo Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Displays information about when the monitored database (inactive by (inactive by (inactive by
was backed up and the name of the backup file. This default) default) default)
parameter is only displayed if the Backup Mail Database
recovery action is executed.

Collector: recovery action

Table 17 PATROL for Lotus Domino 4.5.00 (Part 11 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CorruptionState Y std 0-0 0-0 0-0 29 min bool 0=OK
alarm OK OK 1=corrupted
Monitors mail.box for corruption and automatically (inactive by (inactive by
executes a recovery action if it detects corruption. default) default)
DBInfoColl Y coll NA NA NA 5 min none none

Collects mailbox database information.

LNDBSize Y con 0-300120 0-0 0-0 set by coll graph number of KB
warn OK OK
Displays the size of the mailbox database. (inactive by (inactive by
default) default)
Collector: NOTES_MAILBOX/DBInfoColl
WhiteSpace Y con 0-50 0-0 0-0 set by coll graph percentage of white
warn OK OK space allocated
Displays the percentage of white space (allocated but not (inactive by (inactive by
used) in each mailbox. The data displayed by this default) default)
parameter depends on the server executing statlog at
regular intervals at least once a day. Changes to the
database are not reported until statlog executes and
the WhiteSpace parameter is refreshed.

Collector: NOTES_MAILBOX/DBInfoColl
WhiteSpaceKb Y con 0-0 0-0 0-0 set by coll graph number of KB
OK OK OK
Indicates the white space (allocated but not used) in each (inactive by (inactive by (inactive by
mailbox. default) default) default)

Collector: NOTES_MAILBOX/DBInfoColl
NOTES_MSGSTATUSSUMMARY Application Class
MsgCount Y con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Displays the number of messages by status. (inactive by (inactive by (inactive by
default) default) default)
Collector: Discovery

PATROL Parameter Reference Manual 417

PATROL Parameter Reference Manual 418

Table 17 PATROL for Lotus Domino 4.5.00 (Part 12 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTES_MSGTOPLMSG Application Class
MsgSize Y con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Displays the size of the top 25 largest mail messages. (inactive by (inactive by (inactive by
default) default) default)
Collector: Discovery
TextSummary Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Displays the summary of the top 25 largest messages. (inactive by (inactive by (inactive by
default) default) default)
Collector: Discovery
NOTES_MSGTOPNEXTHOPS Application Class
MsgBytes Y con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Displays the number of message bytes for the top 25 (inactive by (inactive by (inactive by
‘next’ hops. default) default) default)

Collector: Discovery
MsgCount Y con 1-1 1-1 1-1 set by coll graph number of messages
OK OK OK
Displays the number of messages for the top 25 ‘next’ (inactive by (inactive by (inactive by
hops. default) default) default)

Collector: Discovery
NOTES_MSGTOPPREVHOPS Application Class
MsgBytes Y con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Displays the number of message bytes for the top 25 (inactive by (inactive by (inactive by
‘previous’ hops. default) default) default)

Collector: Discovery
Table 17 PATROL for Lotus Domino 4.5.00 (Part 13 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MsgCount Y con 1-1 1-1 1-1 set by coll graph number of messages
OK OK OK
Displays the number of messages for the top 25 ‘previous’ (inactive by (inactive by (inactive by
hops. default) default) default)

Collector: Discovery
NOTES_MSGTOPRECBYCOUNT Application Class
HopMsgs Y con 1-1 1-1 1-1 set by coll graph number of hops
OK OK OK
Displays the number of messages hops for the top 25 (inactive by (inactive by (inactive by
recipients by count. default) default) default)

Collector: Discovery
MsgsReceived Y con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Displays the total number of messages received by the (inactive by (inactive by (inactive by
top 25 recipients. default) default) default)

Collector: Discovery
TextSummary Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Displays the summary for the top 25 mail recipients by (inactive by (inactive by (inactive by
count. default) default) default)

Collector: Discovery
NOTES_MSGTOPRECBYSIZE Application Class
BytesReceived Y con 1-1 1-1 1-1 set by coll graph number of KB
OK OK OK
Displays the total number of bytes received by the top 25 (inactive by (inactive by (inactive by
recipients by size. default) default) default)

Collector: Discovery

PATROL Parameter Reference Manual 419

PATROL Parameter Reference Manual 420

Table 17 PATROL for Lotus Domino 4.5.00 (Part 14 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
HopBytes Y con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Displays the total number of hop bytes for the top 25 (inactive by (inactive by (inactive by
recipients by size. default) default) default)

Collector: Discovery
TextSummary Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Displays the summary for the top 25 mail senders. (inactive by (inactive by (inactive by
default) default) default)
Collector: Discovery
NOTES_MSGTOPSENDERSBYCOUNT Application Class
HopMsgs Y con 1-1 1-1 1-1 set by coll graph number of hops
OK OK OK
Displays the number of messages hops for the top 25 (inactive by (inactive by (inactive by
senders by size. default) default) default)

Collector: Discovery
MsgsSent Y con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Displays the total number of messages sent by the top 25 (inactive by (inactive by (inactive by
senders. default) default) default)

Collector: Discovery
TextSummary Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Displays the summary for the top 25 mail senders by (inactive by (inactive by (inactive by
count. default) default) default)

Collector: Discovery
Table 17 PATROL for Lotus Domino 4.5.00 (Part 15 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTES_MSGTOPSENDERSBYSIZE Application Class
BytesSent Y con 1-1 1-1 1-1 set by coll graph number of KB
OK OK OK
Displays the total number of bytes for the top 25 senders (inactive by (inactive by (inactive by
by size. default) default) default)

Collector: Discovery
HopBytes Y con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Displays the total number of hop bytes for the top (inactive by (inactive by (inactive by
senders by size. default) default) default)

Collector: Discovery
TextSummary Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Displays the summary for the top 25 mail senders by size. (inactive by (inactive by (inactive by
default) default) default)
Collector: Discovery
NOTES_MSGTOPUSERSBYCOUNT Application Class
MsgReceived Y con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Displays the total number of mail messages received by (inactive by (inactive by (inactive by
the top 25 users by count. default) default) default)

Collector: Discovery
MsgRelayed Y con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Displays the total number of mail messages relayed by (inactive by (inactive by (inactive by
the top 25 users by count. default) default) default)

Collector: Discovery

PATROL Parameter Reference Manual 421

PATROL Parameter Reference Manual 422

Table 17 PATROL for Lotus Domino 4.5.00 (Part 16 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MsgSent Y con 1-1 1-1 1-1 set by coll graph number of messages
OK OK OK
Displays the total number of mail messages sent by the (inactive by (inactive by (inactive by
top 25 users by count. default) default) default)

Collector: Discovery
TotalMsg Y con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Displays the total number of mail messages for the top 25 (inactive by (inactive by (inactive by
users by message count. default) default) default)

Collector: Discovery
TextSummary Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Displays the summary of top 25 mail users by count. (inactive by (inactive by (inactive by
default) default) default)
Collector: Discovery
NOTES_MSGTOPUSERSBYSIZE Application Class
BytesReceived Y con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Displays the total bytes of mail received by the top 25 (inactive by (inactive by (inactive by
users by size. default) default) default)

Collector: Discovery
BytesRelayed Y con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Displays the total bytes of mail relayed by the top 25 (inactive by (inactive by (inactive by
users by size. default) default) default)

Collector: Discovery
BytesSent Y con 1-1 1-1 1-1 set by coll graph number of KB
OK OK OK
Displays the total bytes sent by the top 25 users by size. (inactive by (inactive by (inactive by
default) default) default)
Collector: Discovery
Table 17 PATROL for Lotus Domino 4.5.00 (Part 17 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TextSummary Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Displays the summary of top 25 mail users by size. (inactive by (inactive by (inactive by
default) default) default)
Collector: Discovery
TotalBytes Y con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Displays the total bytes used by the top 25 users. (inactive by (inactive by (inactive by
default) default) default)
Collector: Discovery
NOTES_MSGVOLUMESUMMARY Application Class
MsgBytes Y con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Displays the number of message bytes by volume. (inactive by (inactive by (inactive by
default) default) default)
Collector: Discovery
MsgCount Y con 1-1 1-1 1-1 set by coll graph number of messages
OK OK OK
Displays the number of messages by volume. (inactive by (inactive by (inactive by
default) default) default)
Collector: Discovery
NOTES_NEIGH2 Application Class
ServerResponse Y std 0-60 30-60 60-60 5 min graph number of seconds
alarm OK OK
Shows server response time. (inactive by (inactive by
default) default)
ServerState Y std 0-2 1-1 2-2 5 min bool 1 = up
alarm OK alarm 0 = down
Shows whether the neighboring server is up or down. (inactive by
default)

PATROL Parameter Reference Manual 423

PATROL Parameter Reference Manual 424

Table 17 PATROL for Lotus Domino 4.5.00 (Part 18 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTES_SR Application Class
AutoConfiguration Y coll NA NA NA 10 min none none

Identifies the add-in tasks in the notes.ini file of the

monitored Domino server and creates a new server
configuration document for the monitored server, within
the patrol41.nsf database. This configuration document
automatically sets up customized monitoring of the
Domino server. The document is named
AutoConfiguration and resides in NOTES_SR.km.
CONFIGURATION Y coll NA NA NA 5 min none none

Loads server configuration information.

DbinfoColl Y coll NA NA NA 12 hrs none none

Collects database information.

DbnumberOf Y con 0-2000 0-0 0-0 NA graph number of databases
OK OK OK
Indicates the total number of databases on the server and (inactive by (inactive by (inactive by
displays a graph showing the growth of the databases default) default) default)
over time.

Collector: NOTES_SR/DbInfoColl
DbsizeChecker Y con 99-1000000 99-110 500000-1000000 NA graph number of KB
warn warn OK
Checks the size of each database and displays the size of (inactive by (inactive by
the largest Notes database in the Notes data directory. default) default)

Collector: NOTES_SR/DbInfoColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 19 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DbtotalSize Y con 0-2147483647 0-0 0-0 NA graph number of KB
OK OK OK
Displays the total size of all databases on the server. (inactive by (inactive by (inactive by
Monitoring this parameter enables you to manage disk default) default) default)
space dedicated to data and view the growth in a graph.

Collector: NOTES_SR/DbInfoColl
DbusageChecker Y con 5-10000 5-5 10-10 NA graph number of sessions
warn warn warn
Checks each database’s usage against the set alarm values (inactive by (inactive by
and produces a report of the databases that are outside of default) default)
the border. An alarm is triggered for databases with
usage below the minimum (Alarm 1) or above the
maximum (Alarm 2).

Collector: NOTES_SR/DbInfoColl
DbwhiteChecker Y con 0-30 0-0 0-0 NA graph percentage of white
warn warn warn space
Monitors the white space (space allocated but not used) (inactive by (inactive by
for each database and displays the maximum white space default) default)
in a database.

Collector: NOTES_SR/DbInfoColl
Feedback N coll NA NA NA 1 hour text Number of
parameters in Alarm,
Executes commands entered in the ServerStatus Warning, Offline,
Documents of a monitored Node within the patrol41.nsf and OK state.
Server Status View. It also updates the Server Status
Documents for a monitored node.
NotesRip Y std 0-2 1-1 2-2 1 hour graph number of notes.rip
OK warn alarm file updates
Checks for the presence of a notes.rip file in the data (inactive by (inactive by (inactive by
directory of the monitored server. On the first detection, default) default) default)
the parameter creates a warning. An alarm is created on
subsequent increases to the size of the notes.rip file.

PATROL Parameter Reference Manual 425

PATROL Parameter Reference Manual 426

Table 17 PATROL for Lotus Domino 4.5.00 (Part 20 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ServerLoad Y std 0-99 70-85 85-99 5 min graph percentage of
alarm warn alarm response times that
Indicates whether the response time of the server is fast (inactive by (inactive by (inactive by are fast/slow
or slow (unusable). The administrator can define what default) default) default)
response time (in seconds) is fast and at what point the
server becomes unusable. The ServerLoad parameter
derives a server load figure based on the defined
response time. This figure ensures that responses from 0
to “fast” are mapped at 0 to 70 percent, and that
responses from “fast” to “unusable” are mapped at 70 to
100 percent.
ServerResponse Y std 0-100 0-100 100-100 5 min graph number of seconds
alarm OK OK
Shows server response time. (inactive by (inactive by
default) default)
ServerState Y std 0-2 1-1 2-2 1 min stop 1 = up
alarm warn alarm light 0 = down
Indicates whether the server is up or down

Note: The ServerState parameter is unable to work when

the ServerLoad parameter is inactive.
ShowStatsColl Y coll NA NA NA 5 min none none

Collects server statistics and makes them available to

consumer parameters.
Transactions Y std 0-0 0-0 0-0 1 min graph number of
OK OK OK transactions per
Displays the number of server transactions per minute. (inactive by (inactive by (inactive by minute
This parameter shows periods of high server use. default) default) default)
VersionInfo Y con 0-100 0-100 100-100 NA text none
OK OK OK
Shows the version of the add-in task. (inactive by (inactive by (inactive by
default) default) default)
Collector: NOTES_SR/VersionMatch
Table 17 PATROL for Lotus Domino 4.5.00 (Part 21 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
VersionMatch Y std 1-1 1-1 1-1 23 hrs, 59 min boolean 0=No
alarm OK OK 1=Yes
Checks for and returns whether the version of the add-in (inactive by (inactive by
task matches that required by the KM. default) default)
NOTES_SRPROCESS Application Class
DropCount Y con 0-0 0-0 0-0 set by coll gauge number of drops
OK OK OK
Indicates the number of times the add-in task was (inactive by (inactive by (inactive by
dropped and restarted by the PATROL for Lotus Domino default) default) default)
recovery actions. This parameter does not reflect manual
restarts of the add-in task.

Collector: NOTES_SRPROCESS/Discovery
InstCount Y con 1-100 1-1 1-1 set by coll graph none
alarm OK OK
Indicates the number of task instances that are running. (inactive by (inactive by
default) default)
Collector: NOTES_SRPROCESS/Discovery
Status Y con 1-1 1-1 1-1 set by coll graph 1=up
alarm OK OK 0=down
Indicates whether the server task is up or down. (inactive by (inactive by
default) default)
Collector: NOTES_SRPROCESS/Discovery
NOTES_STATISTICS Application Class
FullStats Y con 0-0 0-0 0-0 set by coll text none
OK OK OK
Lists all server statistics in text format. (inactive by (inactive by (inactive by
default) default) default)
Collector: NOTES_SR/ShowStatsColl
NOTESTAT_AGENT Application Class
Daily.AccessDenials N con 0-100 0-100 100-100 set by coll graph number of runs
OK OK OK
Shows the number of access denials per day.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 427

PATROL Parameter Reference Manual 428

Table 17 PATROL for Lotus Domino 4.5.00 (Part 22 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Daily.ScheduledRuns N con 0-100 0-100 100-100 set by coll graph number of runs
OK OK OK
Shows the number of scheduled runs per day.

Collector: NOTES_SR/ShowStatsColl
Daily.TriggeredRuns N con 0-100 0-100 100-100 set by coll graph number of runs
OK OK OK
Shows the number of triggered runs per day.

Collector: NOTES_SR/ShowStatsColl
Daily.UnsuccessfulRuns N con 0-100 0-100 100-100 set by coll graph number of runs
OK OK OK
Shows the number of unsuccessful runs per day.

Collector: NOTES_SR/ShowStatsColl
Daily.UsedRunTime N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the amount of run time used per day.

Collector: NOTES_SR/ShowStatsColl
Hourly.AccessDenials N con 0-100 0-100 100-100 set by coll graph number of runs
OK OK OK
Shows the number of access denials per hour.

Collector: NOTES_SR/ShowStatsColl
Hourly.ScheduledRuns N con 0-100 0-100 100-100 set by coll graph number of runs
OK OK OK
Shows the number of scheduled runs per hour.

Collector: NOTES_SR/ShowStatsColl
Hourly.TriggeredRuns N con 0-100 0-100 100-100 set by coll graph number of runs
OK OK OK
Shows the number of triggered runs per hour.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 23 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Hourly.UnsuccessfulRuns N con 0-100 0-100 100-100 set by coll graph number of runs
OK OK OK
Shows the number of unsuccessful runs per hour.

Collector: NOTES_SR/ShowStatsColl.
Hourly.UsedRunTime N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the amount of run time used per hour.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_CALEN Application Class
Total.All.Appts.Reservations N con 0-0 0-0 0-0 set by coll graph number of
OK OK OK appointments
Displays the total of all appointments and reservations in
scheduling.

Collector: NOTES_SR/ShowStatsColl
Total.All.Users.Resources N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK appointments
Shows the total of all users and resources.

Collector: NOTES_SR/ShowStatsColl
Total.Appts N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK appointments
Shows the total number of appointments.

Collector: NOTES_SR/ShowStatsColl
Total.Reservations N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK reservations
Shows the total number of reservations.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 429

PATROL Parameter Reference Manual 430

Table 17 PATROL for Lotus Domino 4.5.00 (Part 24 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Total.Resources N con 0-100 0-100 100-100 set by coll graph number of resources
OK OK OK
Shows the total number of resources.

Collector: NOTES_SR/ShowStatsColl
Total.Users N con 0-0 0-0 0-0 set by coll graph number of users
OK OK OK
Shows the total number of users.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_CLUSTER Application Class
AvailabilityIndex N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the current percentage index of a server's
availability.

Collector: NOTES_SR/ShowStatsColl
AvailabilityThreshold N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the current setting of a server's availability
threshold.

Collector: NOTES_SR/ShowStatsColl
OpnRedrt.Failovr.Suc N con 0-100 0-100 100-100 set by coll graph number of redirects
OK OK OK
Shows the number of times that a server successfully
redirects a client to another cluster member after the
client fails to open.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 25 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OpnRedrt.FailovrByPath.Suc N con 0-100 0-100 100-100 set by coll graph number of redirects
OK OK OK
Shows the number of times a server successfully redirects
a client to another cluster member after the client fails to
open a database.

Collector: NOTES_SR/ShowStatsColl
OpnRedrt.FailovrByPath.UnSuc N con 0-100 0-100 100-100 set by coll graph number of redirects
OK OK OK
Shows the number of times a server is not able to redirect
a client to another cluster member after the client fails to
open a database.

Collector: NOTES_SR/ShowStatsColl
OpnRedrt.LdBalance.Suc N con 0-100 0-100 100-100 set by coll graph number of redirects
OK OK OK
Shows the number of times that a server successfully
redirects a client to another cluster member after the
client tries to open.

Collector: NOTES_SR/ShowStatsColl
OpnRedrt.LdBalance.Unsuc N con 0-100 0-100 100-100 set by coll graph number of redirects
OK OK OK
Number of times that a server is not able to redirect a
client to another cluster member after the client tries to
open.

Collector: NOTES_SR/ShowStatsColl
OpnRedrt.LdBalanceByPath.Suc N con 0-100 0-100 100-100 set by coll graph number of redirects
OK OK OK
Shows the number of times that a server successfully
redirects a client to another cluster member after the
client tries to open a database.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 431

PATROL Parameter Reference Manual 432

Table 17 PATROL for Lotus Domino 4.5.00 (Part 26 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OpnRedrt.LdBalanceByPath.Unsuc N con 0-100 0-100 100-100 set by coll graph number of redirects
OK OK OK
Number of times that a server is not able to redirect a
client to another cluster member after the client tries to
open a database.

Collector: NOTES_SR/ShowStatsColl
OpenRequest.ClusterBusy Y con undef undef undef set by coll graph number of requests

Shows the number of times that a client tries to open a

database on the server when the server is busy.

Collector: NOTES_SR/ShowStatsColl
OpnReq.DBOutOfService N con 0-100 0-100 100-100 set by coll graph number of redirects
OK OK OK
Shows the number of times a client tries to open a
database that is marked as out of service on the server.

Collector: NOTES_SR/ShowStatsColl
OpenRequest.LoadBalanced N con 0-100 0-100 100-100 set by coll graph number of requests
OK OK OK
Shows the number of times a client tries to open a
database on the server when the server is busy.

Collector: NOTES_SR/ShowStatsColl
ProbeCount N con 0-100 0-100 100-100 set by coll graph number of probes
OK OK OK
Shows the number of times that a server completes a
probe request of the other cluster members.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 27 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ProbeError N con 0-100 0-100 100-100 set by coll graph number of errors
OK OK OK
Shows the number of times that a server receives an error
when probing another server.

Collector: NOTES_SR/ShowStatsColl
ProbeTimeoutmins N con 0-100 0-100 100-100 set by coll graph number of minutes
OK OK OK
Interval at which the intra-cluster probe or cluster
member heartbeat occurs.

Collector: NOTES_SR/ShowStatsColl
Trans.IntervalAvgTime N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the average interval time of cluster transactions.

Collector: NOTES_SR/ShowStatsColl
Trans.IntervalInMinutes N con 0-100 0-100 100-100 set by coll graph number of minutes
OK OK OK
Shows the interval between cluster transactions.

Collector: NOTES_SR/ShowStatsColl
Trans.IntervalInSeconds N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the interval between cluster transactions.

Collector: NOTES_SR/ShowStatsColl
Trans.IntervalsUseInAvg N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the current setting for number of intervals used to
capture transaction data used to calculate workload
balance.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 433

PATROL Parameter Reference Manual 434

Table 17 PATROL for Lotus Domino 4.5.00 (Part 28 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Trans.LastIntervalAvgTime N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the last average interval time of cluster
transactions.

Collector: NOTES_SR/ShowStatsColl
Trans.NormalizeValue N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the current setting of acceptable average
transaction time in milliseconds for a server.\

Collector: NOTES_SR/ShowStatsColl
Trans.RunningCount N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the average total running time of cluster
transactions.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_DATABASE Application Class
BufferControlPool.Peak N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the peak number of database control pools used.

Collector: NOTES_SR/ShowStatsColl
BufferControlPool.Size N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Displays the size of the database buffer control pool.

Collector: NOTES_SR/ShowStatsColl
BufferControlPool.Used N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the number of database control pools used.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 29 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BufferPool.Allocated N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of database control pools allocated.

Collector: NOTES_SR/ShowStatsColl
BufferPool.IRISOpenContainers N con 0-100 0-0 100-100 set by coll graph number of containers
OK OK OK
Shows the number of open IRIS containers.

Collector: NOTES_SR/ShowStatsColl
BufferPool.Maximum N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the maximum size of database control pools.

Collector: NOTES_SR/ShowStatsColl
BufferPool.Peak N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the percentage of buffer pool reads.

Collector: NOTES_SR/ShowStatsColl
BufferPool.Reads N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of database buffer pool reads.

Collector: NOTES_SR/ShowStatsColl
BufferPool.Size N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the size of database buffer control pool.

Collector: NOTES_SR/ShowStatsColl
BufferPool.Used N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the number of used database buffer pool.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 435

PATROL Parameter Reference Manual 436

Table 17 PATROL for Lotus Domino 4.5.00 (Part 30 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BufferPool.Writes N con 0-0 0-0 0-0 set by coll graph number of writes
OK OK OK
Shows the number of database buffer pool writes.

Collector: NOTES_SR/ShowStatsColl
BufPool.PerCentReadsInBuf N con 0-100 0-100 100-100 set by coll graph percentage of reads
OK OK OK
Shows the percentage of buffer pool reads.

Collector: NOTES_SR/ShowStatsColl
Database.BufferPool.MM.Reads N con 0-100 0-100 100-100 set by coll graph number of reads
OK OK OK
Shows the number of database buffer pool MM reads.

Collector: NOTES_SR/ShowStatsColl
Database.BufferPool.MM.Writes N con 0-100 0-100 100-100 set by coll graph number of writes
OK OK OK
Shows the number of database buffer pool MM writes.

Collector: NOTES_SR/ShowStatsColl
DB.BufPool.Maximum.Megabytes N con 0-100 0-100 100-100 set by coll graph number of MB
OK OK OK
Shows the maximum size of the buffer pool.

Collector: NOTES_SR/ShowStatsColl
DB.BufPool.Peak.Megabytes N con 0-100 0-100 100-100 set by coll graph number of MB
OK OK OK
Shows the peak size of the buffer pool.

Collector: NOTES_SR/ShowStatsColl
Db.Bytes.Alloced.High N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of bytes allocated.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 31 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Db.Bytes.Alloced.Low N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of bytes allocated.

Collector: NOTES_SR/ShowStatsColl
Db.FileIO.BytesRead N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of File IO bytes read.

Collector: NOTES_SR/ShowStatsColl
Db.FileIO.FileCommits N con 0-100 0-100 100-100 set by coll graph number of commits
OK OK OK
Shows the number of file commits.

Collector: NOTES_SR/ShowStatsColl
Db.FileIO.TotalReads N con 0-100 0-100 100-100 set by coll graph number of reads
OK OK OK
Shows the total number of reads.

Collector: NOTES_SR/ShowStatsColl
Db.FileIO.TotalWrites N con 0-100 0-100 100-100 set by coll graph number of writes
OK OK OK
Shows the total number of writes.

Collector: NOTES_SR/ShowStatsColl
Db.Grains.Alloced N con 0-100 0-100 100-100 set by coll graph number of grains
OK OK OK
Shows the number of grains allocated.

Collector: NOTES_SR/ShowStatsColl
Db.Grains.Freed N con 0-100 0-100 100-100 set by coll graph number of grains
OK OK OK
Shows the number of grains freed.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 437

PATROL Parameter Reference Manual 438

Table 17 PATROL for Lotus Domino 4.5.00 (Part 32 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DbCache.AverageDbOpenTime N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the average database open time.

Collector: NOTES_SR/ShowStatsColl
DbCache.CurrentEntries N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of current entries.

Collector: NOTES_SR/ShowStatsColl
DbCache.HighWaterMark N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the high watermark of the database cache.

Collector: NOTES_SR/ShowStatsColl
DbCache.Hits N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of hits to the database cache.

Collector: NOTES_SR/ShowStatsColl
DbCache.InitialDbOpens N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of database opens by the database
cache.

Collector: NOTES_SR/ShowStatsColl
DbCache.Lookups N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of cache lookups.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 33 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DbCache.MaxEntries N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the maximum number of entries in the database
cache.

Collector: NOTES_SR/ShowStatsColl
DbCache.NonAgerReplacements N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK replacements
Shows the number of non ager replacements.

Collector: NOTES_SR/ShowStatsColl
DbCache.NonPGReplacements N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK replacements
Shows the number of non PG replacements.

Collector: NOTES_SR/ShowStatsColl
DbCache.OvercrowdingRejections N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of rejections due to overcrowding.

Collector: NOTES_SR/ShowStatsColl
DbCache.TotalDbOpens N con 0-100 0-100 100-100 set by coll graph number of opens
OK OK OK
Shows the total number of database opens.

Collector: NOTES_SR/ShowStatsColl
Db.FileIO.BytesWritten Y con NA NA NA set by coll graph number of bytes

Shows the number of bytes written.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 439

PATROL Parameter Reference Manual 440

Table 17 PATROL for Lotus Domino 4.5.00 (Part 34 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DbPage.Reads.Total N con 0-100 0-100 100-100 set by coll graph number of reads
OK OK OK
Shows the total number of page reads.

Collector: NOTES_SR/ShowStatsColl
DbPage.Writes.Total N con 0-100 0-100 100-100 set by coll graph number of writes
OK OK OK
Shows the total number of page writes.

Collector: NOTES_SR/ShowStatsColl
ExtMgrPool.Peak N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the peak number of external manager pools.

Collector: NOTES_SR/ShowStatsColl
ExtMgrPool.Used N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of external manager pools.

Collector: NOTES_SR/ShowStatsColl
Database.FreeHandleStackHits Y con NA NA NA set by coll graph number of hits

Shows the number of handle stack hits.

Collector: NOTES_SR/ShowStatsColl
Database.HandleAllocations Y con NA NA NA set by coll graph number of allocations

Shows the number of handle allocations.

Collector: NOTES_SR/ShowStatsColl
FreeHandleStack.MissRate N con 0-100 0-100 100-100 set by coll graph rate
OK OK OK
Shows the handle stack miss rate.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 35 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ModNoteLog.Hits N con 0-100 0-100 100-100 set by coll graph number of hits
OK OK OK
Shows the number of note log hits.

Collector: NOTES_SR/ShowStatsColl
ModNoteLog.Misses N con 0-100 0-100 100-100 set by coll graph number of misses
OK OK OK
Shows the number of external manager pools.

Collector: NOTES_SR/ShowStatsColl
NAMELookupCacheCacheSize N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the size of the lookup cache.

Collector: NOTES_SR/ShowStatsColl
NAMELookupCacheHashSize N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the hash size of the cache.

Collector: NOTES_SR/ShowStatsColl
NAMELookupCacheHits N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of cache lookup successes.

Collector: NOTES_SR/ShowStatsColl
NAMELookupCacheLookups N con 0-100 0-100 100-100 set by coll graph number of lookups
OK OK OK
Shows the number of cache lookups.

Collector: NOTES_SR/ShowStatsColl
NAMELookupCacheMisses N con 0-100 0-100 100-100 set by coll graph number of misses
OK OK Ok
Shows the number of cache lookup misses.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 441

PATROL Parameter Reference Manual 442

Table 17 PATROL for Lotus Domino 4.5.00 (Part 36 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NAMELookupCacheNoHitHits N con 0-100 0-100 100-100 set by coll graph number of hits
OK OK OK
Shows the number unsuccessful hits to the cache.

Collector: NOTES_SR/ShowStatsColl
NAMELookupCachePool.Peak N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the peak number of external manager pools.

Collector: NOTES_SR/ShowStatsColl
NAMELookupCachePool.Used N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the size of the lookup cache pool used.

Collector: NOTES_SR/ShowStatsColl
NAMELookupCacheResets N con 0-100 0-100 100-100 set by coll graph number of resets
OK OK OK
Shows the number of lookup cache resets.

Collector: NOTES_SR/ShowStatsColl
NIFPool.Peak N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the peak size of of the NIF pool.

Collector: NOTES_SR/ShowStatsColl
NIFPool.Size N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the size of of the NIF pool.

Collector: NOTES_SR/ShowStatsColl
NIFPool.Used N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the number of NIF pools used.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 37 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NIFSort.Reads N con 0-100 0-100 100-100 set by coll graph number of reads
OK OK OK
Shows the number of NIF pool reads.

Collector: NOTES_SR/ShowStatsColl
NIFSort.Writes N con 0-100 0-100 100-100 set by coll graph number of writes
OK OK OK
Shows the number of NIF pool writes.

Collector: NOTES_SR/ShowStatsColl
Note.LastAccessedTimeUpdates N con 0-100 0-100 100-100 set by coll graph number of updates
OK OK OK
Shows the number of note updates.

Collector: NOTES_SR/ShowStatsColl
NSF.FreeHandleStackHits N con 0-100 0-100 100-100 set by coll graph number of handles
OK OK OK
Shows the number of free handles for the NSF pool.

Collector: NOTES_SR/ShowStatsColl
NSF.HandleAllocations N con 0-100 0-100 100-100 set by coll graph number of handles
OK OK OK
Shows the number of handles allocated for the NSF pool.

Collector: NOTES_SR/ShowStatsColl
NSFMissRate N con 0-100 0-100 100-100 set by coll graph rate
OK OK OK
Displays the number of unsuccessful NSF pool hits.

Collector: NOTES_SR/ShowStatsColl
NSFPool.Peak N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the peak size of of the NSF pool.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 443

PATROL Parameter Reference Manual 444

Table 17 PATROL for Lotus Domino 4.5.00 (Part 38 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NSFPool.Size N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the size of of the NSF pool.

Collector: NOTES_SR/ShowStatsColl
NSFPool.Used N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the number of NSF pools used.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_DIIOP Application Class
Port.SSL N con 0-100 0-100 100-100 set by coll graph port
OK OK OK
Shows the SSL port number.

Collector: NOTES_SR/ShowStatsColl
Port.Tcpip N con 0-100 0-100 100-100 set by coll graph port
OK OK OK
Shows the TCPIP port number.

Collector: NOTES_SR/ShowStatsColl
Thread.ThreadPoolsize.BOA N con 0-100 0-100 100-100 set by coll graph size of thread pool
OK OK OK
Shows the size of the BOA thread pool.

Collector: NOTES_SR/ShowStatsColl
Thread.ThreadPoolsize.EM N con 0-100 0-100 100-100 set by coll graph size of thread pool
OK OK OK
Shows the size of the EM thread pool.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 39 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTESTAT_DISK Application Class
ANALYSIS N std 0-100 0-9 10-19 5 min graph percentage
OK alarm warn
The Analysis parameter indicates health analysis.

Collector: NOTES_SR/ShowStatsColl
Free N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the amount of free disk space.

Collector: NOTES_SR/ShowStatsColl
Size Y con undef undef undef set by coll graph none

Shows the total size of the disk.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_DISKSYS Application Class
AvailableBlocks N con 0-100 0-100 100-100 set by coll graph none
ok ok ok
Shows the number of available disk blocks on NetWare
SYS volume.

Collector: NOTES_SR/ShowStatsColl
AvailableDirectorySlots n con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the number of available directory slots on
NetWare SYS volume.

Collector: NOTES_SR/ShowStatsColl
DriveNumber N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the physical drive number of NetWare SYS
Volume.

Collector: NOTES_SR/ShowStatsColl.

PATROL Parameter Reference Manual 445

PATROL Parameter Reference Manual 446

Table 17 PATROL for Lotus Domino 4.5.00 (Part 40 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Free N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the amount of free space on NetWare SYS Volume

Collector: NOTES_SR/ShowStatsColl
NotYetPurgableBlocks N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the number of blocks that are not purgeable on
NetWare SYS Volume.

Collector: NOTES_SR/ShowStatsColl
Number N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the volume number of NetWare SYS Volume.

Collector: NOTES_SR/ShowStatsColl
PurgableBlocks N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the number of purgeable blocks on NetWare SYS
Volume.

Collector: NOTES_SR/ShowStatsColl
Size N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the total size of NetWare SYS Volume.

Collector: NOTES_SR/ShowStatsColl
StartingBlock N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the physical block number where NetWare SYS
Volume starts.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 41 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TotalBlocks N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the physical blocks NetWare SYS Volume spans.

Collector: NOTES_SR/ShowStatsColl
TotalDirectorySlots N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the number of directory slots NetWare SYS
Volume spans.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_DOMINO Application Class
Cache.Command.Count N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the cache command count.

Collector: NOTES_SR/ShowStatsColl
Cache.Command.DisplaceRate N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the cache displace rate.

Collector: NOTES_SR/ShowStatsColl
Cache.Command.HitRate N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the cache command hit rate.

Collector: NOTES_SR/ShowStatsColl
Cache.Command.MaxSize N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the maximum command size.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 447

PATROL Parameter Reference Manual 448

Table 17 PATROL for Lotus Domino 4.5.00 (Part 42 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Cache.Database.DisplaceRate N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the cache database displace rate.

Collector: NOTES_SR/ShowStatsColl
Cache.Database.HitRate N con 0-100 0-100 100-100 set by coll graph hit rate
OK OK OK
Shows the cache database hit rate.

Collector: NOTES_SR/ShowStatsColl
Cache.Design.Count N con 0-100 0-100 100-100 set by coll graph number of designs
OK OK OK
Shows the number of designs.

Collector: NOTES_SR/ShowStatsColl
Cache.Design.DisplaceRate N con 0-100 0-100 100-100 set by coll graph rate
OK OK OK
Shows the cache design displace rate.

Collector: NOTES_SR/ShowStatsColl
Cache.Design.HitRate N con 0-100 0-100 100-100 set by coll graph rate
OK OK OK
Shows the cache design hit rate.

Collector: NOTES_SR/ShowStatsColl
Cache.Design.MaxSize N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the maximum design size.

Collector: NOTES_SR/ShowStatsColl
Cache.Session.Count N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of cache sessions.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 43 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Cache.Session.MaxSize N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the maximum cache session size.

Collector: NOTES_SR/ShowStatsColl
Cache.User.Count N con 0-100 0-100 100-100 set by coll graph number of users
OK OK OK
Shows the number of users.

Collector: NOTES_SR/ShowStatsColl
Cache.User.DisplaceRate N con 0-100 0-100 100-100 set by coll graph rate
OK OK OK
Shows the user displace rate.

Collector: NOTES_SR/ShowStatsColl
Cache.User.HitRate N con 0-100 0-100 100-100 set by coll graph rate
OK OK OK
Shows the cache user hit rate.

Collector: NOTES_SR/ShowStatsColl
Cache.User.MaxSize N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the cache user maximum size.

Collector: NOTES_SR/ShowStatsColl
Command.CopyToFolder N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'CopyToFolder' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 449

PATROL Parameter Reference Manual 450

Table 17 PATROL for Lotus Domino 4.5.00 (Part 44 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Command.CreateDocument N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the count of 'CreateDocument' URLs that have
come into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.DeleteDocument N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'DeleteDocument' URLs that have
come into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.DeleteDocuments N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'DeleteDocuments' URLs that have
come into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.EditDocument N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'EditDocument' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.GetOrbCookie N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'GetOrbCookie' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.Login N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'Login' URLs that have come into the
server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 45 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Command.MoveToFolder N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'MoveToFolder' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.Navigate N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'Command Navigate' URLs that have
come into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.OpenAbout N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'Open About' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.OpenAgent N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'Open Agent' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.OpenDatabase N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'OpenDatabase' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.OpenDocument N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'OpenDocument' URLs that have
come into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 451

PATROL Parameter Reference Manual 452

Table 17 PATROL for Lotus Domino 4.5.00 (Part 46 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Command.OpenElement N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'OpenElement' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.OpenForm N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'OpenForm' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.OpenHelp N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'OpenHelp' URLs that have come into
the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.OpenIcon N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'OpenIcon’ URLs that have come into
the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.OpenImageResource N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'OpenImageResource' URLs that
have come into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.OpenNavigator N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'OpenNavigator’ URLs that have
come into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 47 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Command.OpenServer N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'OpenServer' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.OpenView N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'OpenView' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.ReadForm N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'ReadForm’ URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.Redirect N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'Redirect' URLs that have come into
the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.RemoveFromFolder N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'RemoveFromFolder' URLs that have
come into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.RequestCert N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'RequestCert' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 453

PATROL Parameter Reference Manual 454

Table 17 PATROL for Lotus Domino 4.5.00 (Part 48 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Command.SaveDocument N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'SaveDocument' URLs that have
come into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.SearchDomain N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'SearchDomain' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.SearchSite N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'SearchSite' URLs that have come into
the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.SearchView N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of 'SearchView' URLs that have come
into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.Total N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of command URLs that have come into
the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Command.Unknown N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the count of unknown command URLs that have
come into the server since server was last started.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 49 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Config.ActiveThreads.Max N con 0-100 0-100 100-100 set by coll graph number of threads
OK OK OK
Shows the maximum number of active threads.

Collector: NOTES_SR/ShowStatsColl
Config.ActiveThreads.Min N con 0-100 0-100 100-100 set by coll graph number of threads
OK OK OK
Shows the minimum number of active threads.

Collector: NOTES_SR/ShowStatsColl
Config.AllowDirectoryLinks N con 0-100 0-100 100-100 set by coll gauge 1 = yes
OK OK OK
Indicates whether directory links are allowed.

Collector: NOTES_SR/ShowStatsColl
Config.Cache.Delete N con 0-100 0-100 100-100 set by coll graph number of deletions
OK OK OK
Shows the number of cache deletions.

Collector: NOTES_SR/ShowStatsColl
Config.Cache.Size.Max N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the maximum cache size.

Collector: NOTES_SR/ShowStatsColl
Config.DNSLookup N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the DNS lookup.

Collector: NOTES_SR/ShowStatsColl
Config.GarbageCol.Interval N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the garbage collection interval.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 455

PATROL Parameter Reference Manual 456

Table 17 PATROL for Lotus Domino 4.5.00 (Part 50 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Config.GarbageCol.Status N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the garbage collection status.

Collector: NOTES_SR/ShowStatsColl
Config.HostName N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the host name.

Collector: NOTES_SR/ShowStatsColl
Config.Image.Interlaced N con 0-100 0-100 100-100 set by coll graph number of images
OK OK OK
Shows the number of interlaced images.

Collector: NOTES_SR/ShowStatsColl
Config.Log.Access N con 0-100 0-100 100-100 set by coll text none
OK OK OK
Shows the level of log access.

Collector: NOTES_SR/ShowStatsColl
Config.Log.Error N con 0-100 0-100 100-100 set by coll text none
OK OK OK
Shows the log error information.

Collector: NOTES_SR/ShowStatsColl
Config.Log.Filter N con 0-100 0-100 100-100 set by coll text none
OK OK OK
Shows the log filter information.

Collector: NOTES_SR/ShowStatsColl
Config.Log.TimeStamp N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the log timestamp information.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 51 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Config.PortNumber N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the port number.

Collector: NOTES_SR/ShowStatsColl
Config.PortStatus N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the port status.

Collector: NOTES_SR/ShowStatsColl
Config.SSL.PortNumber N con 0-100 0-100 100-100 set by coll graph port
OK OK OK
Shows the SSL port number.

Collector: NOTES_SR/ShowStatsColl
Config.SSL.Status N con 0-100 0-100 100-100 set by coll graph status
OK OK OK
Shows the SSL status.

Collector: NOTES_SR/ShowStatsColl
Config.Timeout.CGI N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows theCGI timeout value.

Collector: NOTES_SR/ShowStatsColl
Config.Timeout.IdleThread N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the timeout idle thread.

Collector: NOTES_SR/ShowStatsColl
Config.Timeout.Input N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Domino.Config.Timeout.Input.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 457

PATROL Parameter Reference Manual 458

Table 17 PATROL for Lotus Domino 4.5.00 (Part 52 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Config.Timeout.Output N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the timeout output.

Collector: NOTES_SR/ShowStatsColl
Config.View.Lines N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the view lines.

Collector: NOTES_SR/ShowStatsColl
Requests.Per1Day.Peak N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the peak requests over the past day.

Collector: NOTES_SR/ShowStatsColl
Requests.Per1Day.Total N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the total requests over the past day.

Collector: NOTES_SR/ShowStatsColl
Requests.Per1Hour N con 0-100 0-100 100-100 set by coll graph number of requests
OK OK OK
Shows the requests over the past hour.

Collector: NOTES_SR/ShowStatsColl
Requests.Per1Hour.Peak N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the peak requests over the past hour.

Collector: NOTES_SR/ShowStatsColl
Requests.Per1Hour.Total N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the total requests over the past hour.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 53 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Requests.Per1Minute N con 0-100 0-100 100-100 set by coll graph number of requests
OK OK OK
Shows the requests over the past minute.

Collector: NOTES_SR/ShowStatsColl
Requests.Per1Minute.Peak N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the peak requests over the past minute.

Collector: NOTES_SR/ShowStatsColl
Requests.Per1Minute.Total N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the total requests over the past minute.

Collector: NOTES_SR/ShowStatsColl
Requests.Per5Minute N con 0-100 0-100 100-100 set by coll graph number of requests
OK OK OK
Shows the requests over the past fiveminutes.

Collector: NOTES_SR/ShowStatsColl
Requests.Per5Minute.Peak N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the peak requests over the past five minutes.

Collector: NOTES_SR/ShowStatsColl
Requests.Per5Minute.Total N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the total requests over the past five minutes.

Collector: NOTES_SR/ShowStatsColl
Requests.Total N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the total requests.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 459

PATROL Parameter Reference Manual 460

Table 17 PATROL for Lotus Domino 4.5.00 (Part 54 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ThreadPool.average N con 0-100 0-100 100-100 set by coll graph average of thread
OK OK OK pool
Shows the thread pool average.

Collector: NOTES_SR/ShowStatsColl
ThreadPool.max N con 0-100 0-100 100-100 set by coll graph max
OK OK OK
Shows the maximum thread pool.

Collector: NOTES_SR/ShowStatsColl
Threads.Active.Peak N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the active thread peak.

Collector: NOTES_SR/ShowStatsColl
Threads.Peak.Total N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the total thread peak.

Collector: NOTES_SR/ShowStatsColl
Threads.Total N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Shows the total threads.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_FTP Application Class
Bytes.Received N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of bytes received.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 55 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Bytes.Sent N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of bytes sent.

Collector: NOTES_SR/ShowStatsColl
Files.Received N con 0-100 0-100 100-100 set by coll graph number of files
OK OK OK
Shows the number of files received.

Collector: NOTES_SR/ShowStatsColl
Files.Sent N con 0-100 0-100 100-100 set by coll graph number of files
OK OK OK
Shows the number of files sent.

Collector: NOTES_SR/ShowStatsColl
Users.Current.Anonymous N con 0-100 0-100 100-100 set by coll graph number of users
OK OK OK
Shows the current number of anonymous users.

Collector: NOTES_SR/ShowStatsColl
Users.Current.Regular N con 0-100 0-100 100-100 set by coll graph number of users
OK OK OK
Shows the current number of regular users.

Collector: NOTES_SR/ShowStatsColl
Users.Peak.Anonymous N con 0-100 0-100 100-100 set by coll graph number of users
OK OK OK
Shows the peak number of anonymous users.

Collector: NOTES_SR/ShowStatsColl
Users.Peak.Regular N con 0-100 0-100 100-100 set by coll graph number of users
OK OK OK
Shows the peak number of regular users.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 461

PATROL Parameter Reference Manual 462

Table 17 PATROL for Lotus Domino 4.5.00 (Part 56 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Users.Total.Anonymous N con 0-100 0-100 100-100 set by coll graph number of users
OK OK OK
Shows thetotal number of anonymous users.

Collector: NOTES_SR/ShowStatsColl
Users.Total.Regular N con 0-100 0-100 100-100 set by coll graph number of users
OK OK OK
Shows the total number of regular users.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_ICM Application Class
Cmd.Busy N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the number of busy commands.

Collector: NOTES_SR/ShowStatsColl
Cmd.Recieve.Error N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the number of commands which have received
errors.

Collector: NOTES_SR/ShowStatsColl
Cmd.Total N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the total number of commands.

Collector: NOTES_SR/ShowStatsColl
Cmd.Unknown N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK commands
Shows the number of unknown commands.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 57 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Redir.Success N con 0-100 0-100 100-100 set by coll graph number of redirects
OK OK OK
Shows the number of successful redirects.

Collector: NOTES_SR/ShowStatsColl
Redir.Unsuccessful N con 0-100 0-100 100-100 set by coll graph number of redirects
OK OK OK
Shows the number of unsuccessful redirects.

Collector: NOTES_SR/ShowStatsColl
Requests.1hour N con 0-100 0-100 100-100 set by coll graph number of requests
OK OK OK
Shows the number of requests over the past hour.

Collector: NOTES_SR/ShowStatsColl
Requests.1min N con 0-100 0-100 100-100 set by coll graph number of requests
OK OK OK
Shows the number of requests over the past minute.

Collector: NOTES_SR/ShowStatsColl
Requests.5Min N con 0-100 0-100 100-100 set by coll graph number of requests
OK OK OK
Shows the number of requests over the past five minutes.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_ISRV Application Class
EndpointQueue N con 0-100 0-100 100-100 set by coll graph number of handles
OK OK OK
Shows the number of EndpointQueue handles.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 463

PATROL Parameter Reference Manual 464

Table 17 PATROL for Lotus Domino 4.5.00 (Part 58 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Sessions.Inbound.Non-SSL N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of inbound non-SSL sessions.

Collector: NOTES_SR/ShowStatsColl
Sessions.Inbound.SSL N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of inbound SSL sessions.

Collector: NOTES_SR/ShowStatsColl
Sesns.Inbd.SSL.BadHndshk N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of inbound SSL sessions with bad
handshakes.

Collector: NOTES_SR/ShowStatsColl
Sessions.Inbound.Total N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the total number of inbound sessions.

Collector: NOTES_SR/ShowStatsColl
Sessions.Threads.Idle N con 0-100 0-100 100-100 set by coll graph number of threads
OK OK OK
Shows the number of idle threads.

Collector: NOTES_SR/ShowStatsColl
Task.Sessions.Active N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of active task sessions.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 59 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTESTAT_LDAP Application Class
Anonymous.LDAP.Connections N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK connections
Shows the number of anonymous LDAP connections.

Collector: NOTES_SR/ShowStatsColl
Average.LDAP.Search.time N con 0-100 0-100 100-100 set by coll graph seconds
OK OK OK
Shows the average LDAP search time.

Collector: NOTES_SR/ShowStatsColl
Failed.LDAP.Connections N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK connections
Shows the number of failed LDAP connections.

Collector: NOTES_SR/ShowStatsColl
Longest.LDAP.Search.request N con 0-100 0-100 100-100 set by coll graph number of requests
OK OK OK
Shows the number of failed LDAP search requests.

Collector: NOTES_SR/ShowStatsColl
Longest.LDAP.Search.time N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the longest LDAP search time.

Collector: NOTES_SR/ShowStatsColl
Simple.LDAP.Connections N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK connections
Shows the number of simple LDAP connections.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 465

PATROL Parameter Reference Manual 466

Table 17 PATROL for Lotus Domino 4.5.00 (Part 60 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Strong.Auth.Connections N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK connections
Shows the number of strong authentication LDAP
connections.

Collector: NOTES_SR/ShowStatsColl
Total.LDAP.Abandons N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the number of strong authentication LDAP
connections.

Collector: NOTES_SR/ShowStatsColl
Total.LDAP.Adds N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the total number of LDAP adds.

Collector: NOTES_SR/ShowStatsColl
Total.LDAP.Compares N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the total number of LDAP compares.

Collector: NOTES_SR/ShowStatsColl
Total.LDAP.Connections N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the total number of LDAP connections.

Collector: NOTES_SR/ShowStatsColl
Total.LDAP.Deletes N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the total number of LDAP deletes.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 61 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Total.LDAP.Extended.Operations N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the total number of extended LDAP operations.

Collector: NOTES_SR/ShowStatsColl
Total.LDAP.Modifies N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the total number of LDAP modifies.

Collector: NOTES_SR/ShowStatsColl
Total.LDAP.ModifyDNs N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the total number of LDAP modify DNs.

Collector: NOTES_SR/ShowStatsColl
Total.LDAP.Searches N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the total number of LDAP searches.

Collector: NOTES_SR/ShowStatsColl
Total.LDAP.Searches.for.Root.DSE N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the total number of LDAP searches for root DSE.

Collector: NOTES_SR/ShowStatsColl
Total.LDAP.Searches.for.Subsch N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the total number of LDAP searches for subschema.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 467

PATROL Parameter Reference Manual 468

Table 17 PATROL for Lotus Domino 4.5.00 (Part 62 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTESTAT_MAIL Application Class
AverageDeliverTime N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the average delivery time.

Collector: NOTES_SR/ShowStatsColl
AverageServerHops N con 0-100 0-100 100-100 set by coll graph number of hops
OK OK OK
Shows the average number of server hops.

Collector: NOTES_SR/ShowStatsColl
AverageSizeDelivered N con 0-100 0-100 100-100 set by coll graph number of kb
OK OK OK
Shows the average size of delivered mail.

Collector: NOTES_SR/ShowStatsColl
CurrentByteDeliveryRate N con 0-100 0-100 100-100 set by coll graph rate
OK OK OK
Shows the average delivery rate.

Collector: NOTES_SR/ShowStatsColl
CurrentByteTransferRate N con 0-100 0-100 100-100 set by coll graph rate
OK OK OK
Shows the current byte transfer rate.

Collector: NOTES_SR/ShowStatsColl
CurrentMessageDeliveryRate N con 0-100 0-100 100-100 set by coll graph rate
OK OK OK
Shows the current delivery rate.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 63 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CurrentMessageTransferRate N con 0-100 0-100 100-100 set by coll graph rate
OK OK OK
Shows the current message transfer rate.

Collector: NOTES_SR/ShowStatsColl
DBCacheEntries N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of database cache entries.

Collector: NOTES_SR/ShowStatsColl
DBCacheHits N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of database cache hits.

Collector: NOTES_SR/ShowStatsColl
DBCacheReads N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of database cache reads.

Collector: NOTES_SR/ShowStatsColl
Dead N con 0-0 0-0 0-0 set by coll graph number of messages
OK OK OK
Shows the number of dead mail messages.

Collector: NOTES_SR/ShowStatsColl
Delivered Y con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of delivered messages.

Collector: NOTES_SR/ShowStatsColl
Deliveries N con 0-100 0-100 100-100 set by coll graph number of deliveries
OK OK OK
Shows the number of mail deliveries.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 469

PATROL Parameter Reference Manual 470

Table 17 PATROL for Lotus Domino 4.5.00 (Part 64 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Hold N con 0-100 0-100 100-100 set by coll graph number of holds
OK OK OK
Shows the number of mail holds.

Collector: NOTES_SR/ShowStatsColl
IMAP.Cache.MsgInsertAttempts N con 0-100 0-100 100-100 set by coll graph number of inserts
OK OK OK
Shows the number of message insert attempts.

Collector: NOTES_SR/ShowStatsColl
IMAP.FindCacheAttempted N con 0-100 0-100 100-100 set by coll graph number of hits
OK OK OK
Shows the number of find cache attempts.

Collector: NOTES_SR/ShowStatsColl
IMAP.NumCacheHits N con 0-100 0-100 100-100 set by coll graph number of hits
OK OK OK
Shows the number of cache hits.

Collector: NOTES_SR/ShowStatsColl
IMAP.NumMsgInsertedInCache N con 0-100 0-100 0-100 set by coll graph number of messages
OK OK OK
Shows the number of messages inserted in cache.

Collector: NOTES_SR/ShowStatsColl
MaximumDeliverTime N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the maximum delivery time.

Collector: NOTES_SR/ShowStatsColl
MaximumServerHops N con 0-100 0-100 100-100 set by coll graph number of hops
OK OK OK
Shows the maximum number of server hops.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 65 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MaximumSizeDelivered N con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Shows the maximum message size delivered.

Collector: NOTES_SR/ShowStatsColl
MinimumDeliverTime N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the minimum delivery time.

Collector: NOTES_SR/ShowStatsColl
MinimumServerHops N con 0-100 0-100 100-100 set by coll graph number of hops
OK OK OK
Shows the minimum number of server hops.

Collector: NOTES_SR/ShowStatsColl
MinimumSizeDelivered N con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Shows the minimum message size delivered.

Collector: NOTES_SR/ShowStatsColl
PeakByteTransferRate N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the peak byte transfer rate.

Collector: NOTES_SR/ShowStatsColl
PeakMessagesTransferred N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the peak number of messages transferred.

Collector: NOTES_SR/ShowStatsColl
PeakMessageTranferRate N con 0-100 0-100 100-100 set by coll graph rate
OK OK OK
Shows the peak transfer rate.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 471

PATROL Parameter Reference Manual 472

Table 17 PATROL for Lotus Domino 4.5.00 (Part 66 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PeakTotalBytesTransfered N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the total bytes transferred.

Collector: NOTES_SR/ShowStatsColl
Tables.Reload N con 0-100 0-100 100-100 set by coll graph number of reloads
OK OK OK
Shows the number of reloads.

Collector: NOTES_SR/ShowStatsColl
TotalFailures N con 0-100 0-100 100-100 set by coll graph number of failures
OK OK OK
Shows the total number of failures.

Collector: NOTES_SR/ShowStatsColl
TotalKBTransferred N con 0-100 0-100 100-100 set by coll graph number of KB
OK OK OK
Shows the total KB transferred.

Collector: NOTES_SR/ShowStatsColl
TotalRouted N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the total number of messages routed.

Collector: NOTES_SR/ShowStatsColl
TotalRouted.SMTP N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the total number of SMTP messages routed.

Collector: NOTES_SR/ShowStatsColl
TotalRouted.NRPC N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the total number of NPRC messages routed.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 67 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TransferFailures N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of transfer failures.

Collector: NOTES_SR/ShowStatsColl
Transferred N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of messages transferred.

Collector: NOTES_SR/ShowStatsColl
Waiting N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of messages waiting.

Collector: NOTES_SR/ShowStatsColl
WaitingForDNS N con 0-100 0-100 100-100 set by coll graph number of waits
OK OK OK
Shows the number of messages waiting for DNS.

Collector: NOTES_SR/ShowStatsColl
WaitingRecipients N con 0-100 0-100 100-100 set by coll graph number of recipients
OK OK OK
Shows the number of recipients waiting.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_MAILPROBE Application Class
ResponseTime Y con 0-100 0-100 100-100 set by coll graph number of seconds
warn OK OK
Displays response time in milliseconds (inactive by (inactive by
default) default)
Collector: ProbeStatColl

PATROL Parameter Reference Manual 473

PATROL Parameter Reference Manual 474

Table 17 PATROL for Lotus Domino 4.5.00 (Part 68 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTESTAT_MEMORY Application Class
Allocated N con 0-0 0-0 0-0 set by coll graph number of kb
OK OK OK
Shows the number of bytes allocated.

Collector: NOTES_SR/ShowStatsColl
Allocated.Process N con 0-100 0-100 100-100 set by coll graph number of kb
OK OK OK
Shows the total amount of non-shared memory allocated
by individual processes.

Collector: NOTES_SR/ShowStatsColl
Allocated.Shared N con 0-100 0-100 100-100 set by coll graph number of kb
OK OK OK
Shows the total amount of server memory allocated as
shared memory.

Collector: NOTES_SR/ShowStatsColl
Availability N con 0-0 0-0 0-0 set by coll graph status
OK OK OK
Shows the availability of server memory.

Collector: NOTES_SR/ShowStatsColl
Free N con 0-0 0-0 0-0 set by coll graph number of kb
OK OK OK
Shows the number of bytes free.

Collector: NOTES_SR/ShowStatsColl
FTVDKMaxBufferSizeUsed N con 0-100 0-100 100-100 set by coll graph number of kb
OK OK OK
Shows the maximum buffer size used.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 69 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PhysicalRAM N con 0-100 0-100 100-100 set by coll graph number of kb
OK OK OK
Shows the total amount of physcial memory on the
server.

Collector: NOTES_SR/ShowStatsColl
Quota N con 0-100 0-100 100-100 set by coll graph number of kb
OK OK OK
Shows the maximum amount of memory that can be
allocated by the server.

Collector: NOTES_SR/ShowStatsColl
SwapFile.Size N con 0-0 0-0 0-0 set by coll graph number of kb
OK OK OK
Shows the size of the swap file.

Collector: NOTES_SR/ShowStatsColl
Timeouts N con 0-100 0-100 100-100 set by coll graph number of timeouts
OK OK OK
Shows the number of memory timeouts

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_MHS Application Class
Dead N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of dead messages.

Collector: NOTES_SR/ShowStatsColl
Waiting N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of messages waiting

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 475

PATROL Parameter Reference Manual 476

Table 17 PATROL for Lotus Domino 4.5.00 (Part 70 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
WaitingRecipients N con 0-100 0-100 100-100 set by coll graph number of recipients
OK OK OK
Shows the number of waiting recipients.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_MISC Application Class
AppleTalk.AppleTalk.StatsLogged Y con NA NA NA set by coll graph number of stats

Shows the number of AppleTalk stats logged.

Collector: NOTES_SR/ShowStatsColl
LogUnwrittenEntries Y con NA NA NA set by coll graph number of entries

Shows the number of unwritten entries.

Collector: NOTES_SR/ShowStatsColl
NetWare.SPXII.StatsLogged Y con NA NA NA set by coll graph number of stats

Shows the number of NetWare SPXII stats logged

Collector: NOTES_SR/ShowStatsColl
NumOldSessionsClosed Y con NA NA NA set by coll graph number of sessions

Shows the number of old sessions closed.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_MTA Application Class
Dead N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of dead messages.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 71 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TotalKBTransferred N con 0-100 0-100 100-100 set by coll graph number of kilobytes
OK OK OK
Shows the total number of KB transferred.

Collector: NOTES_SR/ShowStatsColl
TotalRouted N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the total number of messages routed.

Collector: NOTES_SR/ShowStatsColl
TransferFailures N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of transfer failures.

Collector: NOTES_SR/ShowStatsColl
Transferred N con 0-100 0-100 100–100 set by coll graph number of messages
OK OK OK
Shows the number of messages transferred.

Collector: NOTES_SR/ShowStatsColl
Waiting N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of messages waiting.

Collector: NOTES_SR/ShowStatsColl
WaitingRecipients N con 0-100 0-100 100-100 set by coll graph number of recipients
OK OK OK
Shows the number of waiting recipients.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 477

PATROL Parameter Reference Manual 478

Table 17 PATROL for Lotus Domino 4.5.00 (Part 72 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTESTAT_NET Application Class
BytesReceived N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the number of bytes received.

Collector: NOTES_SR/ShowStatsColl
BytesSent N con 0-0 0-0 0-0 set by coll graph number of bytes
OK OK OK
Shows the number of bytes sent.

Collector: NOTES_SR/ShowStatsColl
Sessions.Established.Incoming N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of sessions incoming.

Collector: NOTES_SR/ShowStatsColl
Sessions.Established.Outgoing N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of sessions outgoing.

Collector: NOTES_SR/ShowStatsColl
Sessions.Limit N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the session limit.

Collector: NOTES_SR/ShowStatsColl
Sessions.LimitMax N con 0-0 0-0 0-0 set by coll graph number of sessions
OK OK OK
Shows the maximum session limit.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 73 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Sessions.LimitMin N con 0-0 0-0 0-0 set by coll graph number of sessions
OK OK OK
Shows the minimum session limit.

Collector: NOTES_SR/ShowStatsColl
Sessions.Peak N con 0-0 0-0 0-0 set by coll graph number of sessions
OK OK OK
Shows the peak number of sessions.

Collector: NOTES_SR/ShowStatsColl
Sessions.Recycled N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of recycled sessions.

Collector: NOTES_SR/ShowStatsColl
Sessions.Recycling N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of sessions that are recycling.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_NETBIOS Application Class
CommandBlocks.Available N con 0-100 0-100 100-100 set by coll graph number of blocks
OK OK OK
Shows the number of command blocks available.

Collector: NOTES_SR/ShowStatsColl
CommandBlocks.Total N con 0-100 0-100 100-100 set by coll graph number of blocks
OK OK OK
Shows the total number of command blocks.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 479

PATROL Parameter Reference Manual 480

Table 17 PATROL for Lotus Domino 4.5.00 (Part 74 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Errors.Alignment N con 0-100 0-100 100-100 set by coll graph number of errors
OK OK OK
Shows the number of alignment errors.

Collector: NOTES_SR/ShowStatsColl
Errors.CRC N con 0-100 0-100 100-100 set by coll graph number of errors
OK OK OK
Shows the number of CRC errors.

Collector: NOTES_SR/ShowStatsColl
Errors.Collisions N con NA NA NA set by coll graph number of errors

Shows the number of collision errors.

Collector: NOTES_SR/ShowStatsColl
Packets.Received N con 0-100 0-100 100-100 set by coll graph number of packets
OK OK OK
Shows the number of packets received.

Collector: NOTES_SR/ShowStatsColl
Packets.Transmitted N con 0-100 0-100 100-100 set by coll graph number of packets
OK OK OK
Shows the number of packets transmitted.

Collector: NOTES_SR/ShowStatsColl
Receiver.Resources.Exhausted Y con 0-100 0-100 100-100 set by coll graph number of drops
OK OK OK
Shows the number of dropped resources. (inactive by (inactive by (inactive by
default) default) default)
Collector: NOTES_SR/ShowStatsColl
ReportPeriodMinutes N con 0-100 0-100 100-100 set by coll graph number of minutes
OK OK OK
Shows the report period.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 75 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Session.DataPacketSize N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the session data packet size

Collector: NOTES_SR/ShowStatsColl
Sessions.InUse N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of sessions in use.

Collector: NOTES_SR/ShowStatsColl
Sessions.Maximum N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the maximum number of sessions.

Collector: NOTES_SR/ShowStatsColl
Transmissions.Aborted N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transmissions
Shows the number of aborted transmissions.

Collector: NOTES_SR/ShowStatsColl
Transmissions.Retried N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transmissions
Shows the number of retried transmissions.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_NNTP Application Class
Articles.Posted N con 0-100 0-100 100-100 set by coll graph number of articles
OK OK OK
Shows the number of articles posted.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 481

PATROL Parameter Reference Manual 482

Table 17 PATROL for Lotus Domino 4.5.00 (Part 76 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Articles.Sent N con 0-100 0-100 100-100 set by coll graph number of articles
OK OK OK
Shows the number of articles sent.

Collector: NOTES_SR/ShowStatsColl
Bytes.Received N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of bytes received.

Collector: NOTES_SR/ShowStatsColl
Bytes.Sent N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of bytes sent.

Collector: NOTES_SR/ShowStatsColl
Pull.Articles.Failed N con 0-100 0-100 100-100 set by coll graph number of articles
OK OK OK
Shows the number of pull articles failed.

Collector: NOTES_SR/ShowStatsColl
Push.Articles.Failed N con 0-100 0-100 100-100 set by coll graph number of articles
OK OK OK
Shows the number of push articles failed.

Collector: NOTES_SR/ShowStatsColl
Pull.Articles.Offered N con 0-100 0-100 100-100 set by coll graph number of articles
OK OK OK
Shows the number of pull articles offered.

Collector: NOTES_SR/ShowStatsColl
Push.Articles.Offered N con 0-100 0-100 100-100 set by coll graph number of articles
OK OK OK
Shows the number of push articles offered.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 77 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Pull.Articles.Requested N con 0-100 0-100 100-100 set by coll graph number of articles
OK OK OK
Shows the number of pull articles requested.

Collector: NOTES_SR/ShowStatsColl
Push.Articles.Requested N con 0-100 0-100 100-100 set by coll graph number of articles
OK OK OK
Shows the number of push articles requested.

Collector: NOTES_SR/ShowStatsColl
Pull.Articles.Transfered N con 0-100 0-100 100-100 set by coll graph number of articles
OK OK OK
Shows the number of pull articles transferred.

Collector: NOTES_SR/ShowStatsColl
Push.Articles.Transfered N con 0-100 0-100 100-100 set by coll graph number of articles
OK OK OK
Shows the number of push articles transferred.

Collector: NOTES_SR/ShowStatsColl
Sessions.Outgoing.SSL N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of outgoing SSL sessions.

Collector: NOTES_SR/ShowStatsColl
Sessions.Outgoing.non-SSL N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of outgoing non-SSL sessions.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 483

PATROL Parameter Reference Manual 484

Table 17 PATROL for Lotus Domino 4.5.00 (Part 78 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTESTAT_OBJECT Application Class
SharedBy.01 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 1 user.

Collector: NOTES_SR/ShowStatsColl
SharedBy.02 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 2 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.03 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 3 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.04 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 4 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.05 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 5 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.06 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 6 users.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 79 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SharedBy.07 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 7 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.08 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 8 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.09 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 9 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.10 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 10 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.11 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 11 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.12 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 12 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.13 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 13 users.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 485

PATROL Parameter Reference Manual 486

Table 17 PATROL for Lotus Domino 4.5.00 (Part 80 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SharedBy.14 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 14 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.15 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 15 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.16 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 16 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.17 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 17 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.18 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 18 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.19 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 19 users.

Collector: NOTES_SR/ShowStatsColl
SharedBy.20 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by 20 users.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 81 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SharedBy.Greater N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of objects shared by over 20 users.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_POP3 Application Class
UserCache.Attempts N con 0-100 0-100 100-100 set by coll graph number of attempts
OK OK OK
Shows the number of user attempts.

Collector: NOTES_SR/ShowStatsColl
UserCache.Hits N con 0-100 0-100 100-100 set by coll graph number of hits
OK OK OK
Shows the number of user cache hits.

Collector: NOTES_SR/ShowStatsColl
UserCache.Inserts N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the number of user cache inserts.

Collector: NOTES_SR/ShowStatsColl
UserCache.Lookups N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the number of user cache lookups.

Collector: NOTES_SR/ShowStatsColl
UserCache.OpenReasonCacheFull N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the number of user cache opens due to full cache.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 487

PATROL Parameter Reference Manual 488

Table 17 PATROL for Lotus Domino 4.5.00 (Part 82 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UserCache.OpenReasonDBChanged N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the number of user cache opens due to database
changes.

Collector: NOTES_SR/ShowStatsColl
UserCache.OpenReasonNewEntry N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the number of user cache opens due to new
entries.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_PROBE Application Class
Available Services Y con 0-100 0-100 100-100 set by coll text none
OK OK OK
Shows the available services. (inactive by (inactive by (inactive by
default) default) default)
Collector: NOTES_SR/ShowStatsColl
ResponseTime N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK milliseconds
Collects response time data for all the service probes.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_REPLICA Application Class
Cluster.CachedHandles N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of cache handles.

Collector: NOTES_SR/ShowStatsColl
Cluster.Docs.Added N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK documents
Displays the number of documents added by cluster
replicator.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 83 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Cluster.Docs.Deleted N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK documents
Displays the number of documents deleted by cluster
replicator.

Collector: NOTES_SR/ShowStatsColl
Cluster.Docs.Updated N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK documents
Shows the number of documents updated.

Collector: NOTES_SR/ShowStatsColl
Cluster.Failed N con 0-100 0-100 100-100 set by coll graph number of attempts
OK OK OK
Indicates whether the cluster failed.

Collector: NOTES_SR/ShowStatsColl
Cluster.Files.Local N con 0-100 0-100 100-100 set by coll graph number of files
OK OK OK
Shows the number local cluster files.

Collector: NOTES_SR/ShowStatsColl
Cluster.Files.Remote N con 0-100 0-100 100-100 set by coll graph number of files
OK OK OK
Shows the number of remote cluster files.

Collector: NOTES_SR/ShowStatsColl
Cluster.Retry.Skipped N con 0-100 0-100 100-100 set by coll graph number of retries
OK OK OK
Shows the number of retries skipped.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 489

PATROL Parameter Reference Manual 490

Table 17 PATROL for Lotus Domino 4.5.00 (Part 84 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Cluster.Retry.Waiting N con 0-100 0-100 100-100 set by coll graph number of retries
OK OK OK
Shows the number of retries waiting.

Collector: NOTES_SR/ShowStatsColl
Cluster.SecondsOnQueue N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the number of seconds on queue.

Collector: NOTES_SR/ShowStatsColl
Cluster.SecondsOnQueue.Avg N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the average number of seconds on queue.

Collector: NOTES_SR/ShowStatsColl
Cluster.SecondsOnQueue.Max N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the maximum number of seconds on queue.

Collector: NOTES_SR/ShowStatsColl
Cluster.Servers N con 0-100 0-100 100-100 set by coll graph number of servers
OK OK OK
Shows the number of cluster servers.

Collector: NOTES_SR/ShowStatsColl
Cluster.SessionBytes.In N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of session bytes in.

Collector: NOTES_SR/ShowStatsColl
Cluster.SessionBytes.Out N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of session bytes out.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 85 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Cluster.Successful N con 0-100 0-100 100-100 set by coll graph number of attempts
OK OK OK
Shows the number of successful attempts.

Collector: NOTES_SR/ShowStatsColl
Cluster.WorkQueueDepth N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK ok
Shows the work queue depth.

Collector: NOTES_SR/ShowStatsColl
Cluster.WorkQueueDepth.Avg N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the average work queue depth.

Collector: NOTES_SR/ShowStatsColl
Cluster.WorkQueueDepth.Max N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the maximum work queue depth.

Collector: NOTES_SR/ShowStatsColl
Docs.Added N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK documents
Displays the number of docs added by replicator.

Collector: NOTES_SR/ShowStatsColl
Docs.Deleted N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK documents
Shows the number of documents deleted.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 491

PATROL Parameter Reference Manual 492

Table 17 PATROL for Lotus Domino 4.5.00 (Part 86 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Docs.Updated N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK documents
Displays the number of documents updated in the
server’s databases via replication.

Collector: NOTES_SR/ShowStatsColl
Failed N con 0-100 0-100 100-100 set by coll graph number of attempts
OK OK OK
Shows the number of failed attempts.

Collector: NOTES_SR/ShowStatsColl
RTR.Failed N con 0-100 0-100 100-100 set by coll graph number of attempts
OK OK OK
Shows the number of RTR failed attempts.

Collector: NOTES_SR/ShowStatsColl
RTR.Replicas N con 0-100 0-100 100-100 set by coll graph number of replicas
OK OK OK
Shows the number of RTR failed attempts.

Collector: NOTES_SR/ShowStatsColl
RTR.Retry.Skipped N con 0-100 0-100 100-100 set by coll graph number of retries
OK OK OK
Shows the number of retries skipped.

Collector: NOTES_SR/ShowStatsColl
RTR.Retry.Waiting N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the amount of time waiting.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 87 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
RTR.Servers N con 0-100 0-100 100-100 set by coll graph number of servers
OK OK OK
Shows the number of RTR servers.

Collector: NOTES_SR/ShowStatsColl
RTR.Sources N con 0-100 0-100 100-100 set by coll graph number of sources
OK OK OK
Shows the number of RTR sources.

Collector: NOTES_SR/ShowStatsColl
RTR.Successfull N con 0-100 0-100 100-100 set by coll graph number of attempts
OK OK OK
Shows the number of successful RTR attempts.

Collector: NOTES_SR/ShowStatsColl
RTR.WorkQueueDepth N con 0-100 0-100 100-100 set by coll graph depth
OK OK OK
Shows the work queue depth.

Collector: NOTES_SR/ShowStatsColl
Successful N con 0-100 0-100 100-100 set by coll graph number of attempts
OK OK OK
Shows the number of successful attempts.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_SERVER Application Class
AvailabilityIndex N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of bytes available on the server.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 493

PATROL Parameter Reference Manual 494

Table 17 PATROL for Lotus Domino 4.5.00 (Part 88 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AvailabilityThreshold N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the availability threshold.

Collector: NOTES_SR/ShowStatsColl
BootID N con 0-100 0-100 100-100 set by coll graph ID
OK OK OK
Shows the boot ID.

Collector: NOTES_SR/ShowStatsColl
BusyTimeQuery.ReceivedCount N con 0-100 0-100 100-100 set by coll graph number of queries
OK OK OK
Shows the number of queries received.

Collector: NOTES_SR/ShowStatsColl
BusyTimeQry.Ret.Objs.Sch N con 0-100 0-100 100-100 set by coll graph number of queries
OK OK OK
Shows the number of returned object queries.

Collector: NOTES_SR/ShowStatsColl
ClientOpens.PreV4 N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of clients running a Lotus release prior
to R4.

Collector: NOTES_SR/ShowStatsColl
ClientOpens.V4 N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of clients running Lotus release R4.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 89 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MinIdleDisconnect N con 0-100 0-100 100-100 set by coll graph number of minutes
OK OK OK
Shows the number of minutes disconnected.

Collector: NOTES_SR/ShowStatsColl
OpenRequest.MaxUsers N con 0-100 0-100 100-100 set by coll graph number of users
OK OK OK
Shows the maximum number of users.

Collector: NOTES_SR/ShowStatsColl
OpenRequest.PreV4Client N con 0-100 0-100 100-100 set by coll graph number of clients
OK OK OK
Shows the number of PreV4 clients.

Collector: NOTES_SR/ShowStatsColl
OpenRequest.Restricted N con 0-100 0-100 100-100 set by coll graph number of clients
OK OK OK
Shows the number of restricted requests.

Collector: NOTES_SR/ShowStatsColl
OpenRequest.V4Client N con 0-100 0-100 100-100 set by coll graph number of clients
OK OK OK
Shows the number of V4 clients.

Collector: NOTES_SR/ShowStatsColl
Ports.RS232 N con 0-0 0-0 0-0 set by coll text number of ports
OK OK OK
Shows the number of RS232 ports.

Collector: NOTES_SR/ShowStatsColl
Sessions.Dropped N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of sessions dropped.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 495

PATROL Parameter Reference Manual 496

Table 17 PATROL for Lotus Domino 4.5.00 (Part 90 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Tasks N con 0-0 0-0 0-0 set by coll graph number of tasks
OK OK OK
Shows the number of server tasks.

Collector: NOTES_SR/ShowStatsColl
Timeouts N con 0-100 0-100 100-100 set by coll graph number of timeouts
OK OK OK
Shows the number of timeouts.

Collector: NOTES_SR/ShowStatsColl
Trans.PerMInute N con 0-0 0-0 0-0 set by coll graph number of
OK OK OK transactions
Shows the number of transactions per minute.

Collector: NOTES_SR/ShowStatsColl
Trans.PerMinute.Peak N con 0-0 0-0 0-0 set by coll graph number of
OK OK OK transactions
Shows the peak number of transactions per minute.

Collector: NOTES_SR/ShowStatsColl
Trans.Total N con 0-0 0-0 0-0 set by coll graph number of
OK OK OK transactions
Shows the total number of transactions.

Collector: NOTES_SR/ShowStatsColl
Users N con 0-0 0-0 0-0 set by coll graph number of users
OK OK OK
Shows the number of users.

Collector: NOTES_SR/ShowStatsColl
Users.1MinPeak N con 0-100 0-100 100-100 set by coll graph number of users
OK OK OK
Shows the peak number of users per minute.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 91 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Users.5MinPeak N con 0-100 0-100 100-100 set by coll graph number of users
OK OK OK
Shows the peak number of users per 5 minutes.

Collector: NOTES_SR/ShowStatsColl
Users.Peak N con 0-0 0-0 0-0 set by coll graph number of users
OK OK OK
Shows the peak number of users.

Collector: NOTES_SR/ShowStatsColl
WorkThreads N con 0-100 0-100 100-100 set by coll graph number of threads
OK OK OK
Shows the number of work threads.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_SMTP Application Class
MessagesProcessed N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Displays the number of messages processed.

Collector: NOTES_SR/ShowStatsColl
Sessions.Accept.Queue N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Displays the SMTP listener work queue of incoming
sessions to be processed.

Collector: NOTES_SR/ShowStatsColl
Sessions.Active N con 0-100 0-100 100-100 set by coll graph number of tasks
OK OK OK
Indicates the current number of SMTP server tasks.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 497

PATROL Parameter Reference Manual 498

Table 17 PATROL for Lotus Domino 4.5.00 (Part 92 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Sessions.Inbound.BytesReceived N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Indicates the total number of bytes received by the SMTP
server.

Collector: NOTES_SR/ShowStatsColl
Sessions.Inbound.BytesSent N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Indicates the total number of bytes sent by the SMTP
server.

Collector: NOTES_SR/ShowStatsColl
Sessions.Inbound.Total N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK connections
Displays the total number of SMTP server inbound
connections (SSL & non-SSL).

Collector: NOTES_SR/ShowStatsColl
Sessions.Peak N con 0-100 0-100 100-100 set by coll graph number of tasks
OK OK OK
Displays the peak number of SMTP server tasks since
server startup.

Collector: NOTES_SR/ShowStatsColl
Sessions.Threads.Busy N con 0-100 0-100 100-100 set by coll graph number of tasks
OK OK OK
Displays the number of SMTP server tasks currently
running.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 93 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NOTESTAT_SMTPMTA Application Class
ConvFailures N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of failures

Collector: NOTES_SR/ShowStatsColl
Dead N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of dead messages.

Collector: NOTES_SR/ShowStatsColl
Delivered N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of delivered messages.

Collector: NOTES_SR/ShowStatsColl
HighInbound N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of high inbound messages.

Collector: NOTES_SR/ShowStatsColl
HighOutbound N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of high outbound messages.

Collector: NOTES_SR/ShowStatsColl
InboundBytes N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of inbound bytes.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 499

PATROL Parameter Reference Manual 500

Table 17 PATROL for Lotus Domino 4.5.00 (Part 94 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
InboundSize N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the size of inbound messages.

Collector: NOTES_SR/ShowStatsColl
MessagesProcessed N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of messages processed.

Collector: NOTES_SR/ShowStatsColl
OutboundBytes N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of outbound bytes.

Collector: NOTES_SR/ShowStatsColl
OutboundSize N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the size of the outbound messages.

Collector: NOTES_SR/ShowStatsColl.
TotalRouted N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the total number of routed messages.

Collector: NOTES_SR/ShowStatsColl
TransFailures N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of transfer failures.

Collector: NOTES_SR/ShowStatsColl
Transfered N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of transferred messages.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 95 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Waiting N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of messages waiting.

Collector: NOTES_SR/ShowStatsColl
WaitingConv N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of messages waiting.

Collector: NOTES_SR/ShowStatsColl
WaitingRecipients N con 0-100 0-100 100-100 set by coll graph number of recipients
OK OK OK
Shows the number of waiting recipients.

Collector: NOTES_SR/ShowStatsColl
WaitingTrans N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of transfers waiting.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_SPIN Application Class
AvtIterToHit N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the number of seconds to hit.

Collector: NOTES_SR/ShowStatsColl
Delays N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the amount of time delayed in seconds.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 501

PATROL Parameter Reference Manual 502

Table 17 PATROL for Lotus Domino 4.5.00 (Part 96 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DelaysMsecs N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK milliseconds
Shows the amount of time delayed in milliseconds.

Collector: NOTES_SR/ShowStatsColl
Hits N con 0-100 0-100 100-100 set by coll graph number of hits
OK OK OK
Shows the number of hits.

Collector: NOTES_SR/ShowStatsColl
MaxDelayMask N con 0-100 0-100 100-100 set by coll graph number of seconds
OK OK OK
Shows the maximum amount of time delayed in seconds.

Collector: NOTES_SR/ShowStatsColl
MaxDelayMsecs N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK milliseconds
Shows the maximum amount of time delayed in
milliseconds.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_STATSXXX Application Class
Dead Y con NA NA NA set by coll graph number of messages

Displays the number of dead messages.

Collector: NOTES_SR/ShowStatsColl
Waiting Y con NA NA NA set by coll graph number of messages

Displays the number of waiting messages.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 97 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
WaitingRecipients Y con NA NA NA set by coll graph number of recipients

Displays the number of messages waiting to be delivered.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_TRANS Application Class
PerMinute.LastHour N con 0-100 0-100 100-100 set by coll graph number of operations
OK OK OK
Shows the number of transactions per minute for the past
hour.

Collector: NOTES_SR/ShowStatsColl
Sessions.Peak N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the peak number of sessions.

Collector: NOTES_SR/ShowStatsColl
TRAverage_1 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the average number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRAverage_2 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the average number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRAverage_3 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the average number of transactions.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 503

PATROL Parameter Reference Manual 504

Table 17 PATROL for Lotus Domino 4.5.00 (Part 98 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TRAverage_4 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the average number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRAverage_5 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the average number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRCount_1 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRCount_2 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRCount_3 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRCount_4 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRCount_5 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the number of transactions.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 99 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TRMax_1 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the maximum number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRMax_2 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the maximum number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRMax_3 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the maximum number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRMax_4 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the maximum number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRMax_5 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the maximum number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRMin_1 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the minimum number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRMin_2 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the minimum number of transactions.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 505

PATROL Parameter Reference Manual 506

Table 17 PATROL for Lotus Domino 4.5.00 (Part 100 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TRMin_3 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the minimum number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRMin_4 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the minimum number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRMin_5 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the minimum number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRTotal_1 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the total number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRTotal_2 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the total number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRTotal_3 N con 0-100 0-100 100-100 set by coll graph number of
OK OK ok transactions
Shows the total number of transactions.

Collector: NOTES_SR/ShowStatsColl
TRTotal_4 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the total number of transactions.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 101 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TRTotal_5 N con 0-100 0-100 100-100 set by coll graph number of
OK OK OK transactions
Shows the total number of transactions.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_UNIXMAIL Application Class
Dead N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of dead messages.

Collector: NOTES_SR/ShowStatsColl
TotalFailures N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the total number of failures.

Collector: NOTES_SR/ShowStatsColl
TotalRouted N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the total number of messages routed.

Collector: NOTES_SR/ShowStatsColl
WaitingRecipients N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the total number of waiting recipients.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_WEBPROC Application Class
Process.Num.Active N con 0-100 0-100 100-100 set by coll graph number of processes
OK OK OK
Displays the number of active processes.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 507

PATROL Parameter Reference Manual 508

Table 17 PATROL for Lotus Domino 4.5.00 (Part 102 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Process.Num.Busy N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Displays the number of busy processes.

Collector: NOTES_SR/ShowStatsColl
Process.Num.Idle N con 0-100 0-100 100-100 set by coll graph number of processes
OK OK OK
Displays the number of idle processes.

Collector: NOTES_SR/ShowStatsColl
Process.Num.Maximum N con 0-100 0-100 100-100 set by coll graph none
OK OK OK
Displays the maximum number of processes.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_WEBRET Application Class
Access.FTP N con 0-100 0-100 100-100 set by coll graph number of hits
OK OK OK
Shows the number of FTP hits.

Collector: NOTES_SR/ShowStatsColl
Access.Gopher N con 0-100 0-100 100-100 set by coll graph number of hits
OK OK OK
Shows the number of Gopher hits.

Collector: NOTES_SR/ShowStatsColl
Access.HTTP N con 0-100 0-100 100-100 set by coll graph number of hits
OK OK OK
Shows the number of HTTP hits.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 103 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Bytes.Received N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of bytes received.

Collector: NOTES_SR/ShowStatsColl
Bytes.Sent N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the number of bytes sent

Collector: NOTES_SR/ShowStatsColl
ImageCache.Hits N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of image cache hits.

Collector: NOTES_SR/ShowStatsColl
ImageCache.Misses N con 0-100 0-100 100-100 set by coll graph number of entries
OK OK OK
Shows the number of image cache misses.

Collector: NOTES_SR/ShowStatsColl
Process.Num.Active N con 0-100 0-100 100-100 set by coll graph number of processes
OK OK OK
Shows the number of active processes.

Collector: NOTES_SR/ShowStatsColl
Process.Num.Busy N con 0-100 0-100 100-100 set by coll graph number of processes
OK OK OK
Shows the number of busy processes.

Collector: NOTES_SR/ShowStatsColl
Process.Num.Idle N con 0-100 0-100 100-100 set by coll graph number of processes
OK OK OK
Shows the number of idle processes.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 509

PATROL Parameter Reference Manual 510

Table 17 PATROL for Lotus Domino 4.5.00 (Part 104 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Process.Num.Maximum N con 0-100 0-100 100-100 set by coll graph number of processes
OK OK OK
Shows the maximum number of processes.

Collector: NOTES_SR/ShowStatsColl
URLs.Failed N con 0-100 0-100 100-100 set by coll graph number of failures
OK OK OK
Shows the number of URLs failed.

Collector: NOTES_SR/ShowStatsColl
URLs.Requested N con 0-100 0-100 100-100 set by coll graph number of requests
OK OK OK
Shows the number of URLs requested.

Collector: NOTES_SR/ShowStatsColl
URLs.Succeeded N con 0-100 0-100 100-100 set by coll graph number of requests
OK OK OK
Shows the number of URLs succeeded.

Collector: NOTES_SR/ShowStatsColl
VPOOL.Max.Buf N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the maximum size of the buffer.

Collector: NOTES_SR/ShowStatsColl
VPOOL.Max.Element N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the maximum size of the element.

Collector: NOTES_SR/ShowStatsColl
VPOOL.Max.Marker N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the maximum size of the marker.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 105 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
VPOOL.Max.Text N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the maximum size of the text.

Collector: NOTES_SR/ShowStatsColl
VPOOL.Max.URL N con 0-100 0-100 100-100 set by coll graph number of bytes
OK OK OK
Shows the maximum size of the URL.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_X400 Application Class
Dead N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of dead messages.

Collector: NOTES_SR/ShowStatsColl
ToNotes N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of Notes messages.

Collector: NOTES_SR/ShowStatsColl
ToNotesFailed N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of failed Notes messages.

Collector: NOTES_SR/ShowStatsColl
ToSMTP N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of SMTP messages.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 511

PATROL Parameter Reference Manual 512

Table 17 PATROL for Lotus Domino 4.5.00 (Part 106 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ToSMTPFailed N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of failed SMTP messages.

Collector: NOTES_SR/ShowStatsColl.
ToX400 N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of X400 messages.

Collector: NOTES_SR/ShowStatsColl
ToX400Failed N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of failed X400 messages.

Collector: NOTES_SR/ShowStatsColl
TotalInTheBox N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the total number of messages in the box.

Collector: NOTES_SR/ShowStatsColl
NOTESTAT_XPC Application Class
Errors.CRC N con 0-100 0-100 100-100 set by coll graph number of errors
OK OK OK
Shows the number of CRC errors.

Collector: NOTES_SR/ShowStatsColl
Errors.Port N con 0-100 0-100 100-100 set by coll graph number of errors
OK OK OK
Shows the number of port errors.

Collector: NOTES_SR/ShowStatsColl
Table 17 PATROL for Lotus Domino 4.5.00 (Part 107 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Errors.RetransmittedPackets N con 0-100 0-100 100-100 set by coll graph number of errors
OK OK OK
Shows the number of retransmitted packet errors.

Collector: NOTES_SR/ShowStatsColl
Sessions.Active N con 0-100 0-100 100-100 set by coll graph number of sessions
OK OK OK
Shows the number of sessions active.

Collector: NOTES_SR/ShowStatsColl
Speed.Carrier N con 0-100 0-100 100-100 set by coll graph baud rate
OK OK OK
Shows the carrier speed.

Collector: NOTES_SR/ShowStatsColl
Speed.Port N con 0-100 0-100 100-100 set by coll graph baud rate
OK OK OK
Shows the number of port speed.

Collector: NOTES_SR/ShowStatsColl
Status N con 0-100 0-100 100-100 set by coll graph status
OK OK OK
Shows the port status.

Collector: NOTES_SR/ShowStatsColl
UserBytes.Received N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of bytes received.

Collector: NOTES_SR/ShowStatsColl
UserBytes.Sent N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of bytes sent.

Collector: NOTES_SR/ShowStatsColl

PATROL Parameter Reference Manual 513

PATROL Parameter Reference Manual 514

Table 17 PATROL for Lotus Domino 4.5.00 (Part 108 of 108)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UserMsgs.Received N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of messages sent.

Collector: NOTES_SR/ShowStatsColl
UserMsgs.Sent N con 0-100 0-100 100-100 set by coll graph number of messages
OK OK OK
Shows the number of messages received.

Collector: NOTES_SR/ShowStatsColl
PATROL for Microsoft Exchange Servers 5.0.00

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 1 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_AD_Connection Application Class
ADConnColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Active Directory Connector consumer
parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
FailedAttempts Y con 0–2147483647 undef undef set by coll graph attempts
alarm
Displays the number of times in the last collection cycle
that the Active Directory connector failed to add or
modify objects in the destinations directory.

Collector: ADConnColl
ImportFailRate Y con 0–2147483647 undef undef set by coll graph imports
alarm
Displays the rate of Active Directory import failures.

Collector: ADConnColl

PATROL Parameter Reference Manual 515

PATROL Parameter Reference Manual 516

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 2 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_AD_Replication Application Class
AccessDenials Y con 0–2147483647 undef undef set by coll graph denials
alarm
Displays the number of times that write operations were
refused because of a security problem associated with
your connection to an Exchange 5.x server.

Collector: ADRepColl
ADReplColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the MSEXCH_AD_Replication consumer
parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.

Collector: ADRepColl
ReplSynchsPending Y con 0–2147483647 undef undef set by coll graph updates
alarm
Displays the number of replication requests that are
queued but not yet processed.

Collector: ADRepColl
ReplUpdateRate Y con 0–100 undef undef set by coll graph updates
alarm
Displays the rate that replication updates are applied to
the local server by the site replication service.

Collector: ADRepColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 3 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_Address_List Application Class
AddressListQueueLength Y con 0–2147483647 undef undef set by coll gauge entries
alarm
Displays the number of entries in the Address List queue.

Collector: AlColl
ALColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Address List consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
ModifyFailRate Y con 0–2147483647 undef undef set by coll gauge failures per sec
alarm
Displays the rate of LDAP modify failures.

Collector: AlColl
RecipientQueueLength Y con 0–2147483647 undef undef set by coll gauge entries
alarm
Displays the number of replication messages received
from remote servers that are waiting in the public
information store receive queue.

Collector: AlColl
MSEXCH_Chat_Communities Application Class
AuthFailures Y con 0–2147483647 undef undef set by coll graph failures
alarm
Displays the number of failed authentication attempts.

Collector: ChatCommColl

PATROL Parameter Reference Manual 517

PATROL Parameter Reference Manual 518

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 4 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ChatCommColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Chat Communities consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
ClientBytesQueued Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the total number of bytes that are waiting to be
transmitted from the chat server to clients.

This parameter is available only when the Exchange 2000

Chat Service is running.

Collector: ChatCommColl
MSEXCH_Chat_Servers Application Class
ChatSvrColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Chat Servers consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 5 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DnsLookupFailures Y con 0–2147483647 undef undef set by coll graph failures
OK
Displays the number of times that a DNS Lookup failed
in the last collection cycle.

If this value is unusually high, a DNS server may be

down or misconfigured.

This parameter is available only when the Exchange 2000

Chat Service is running.

Collector: ChatSvrColl
SrvOpsQueued Y con 0–2147483647 undef undef set by coll graph operations
OK
Displays the number of chat server operations that are
currently queued.

This parameter is available only when the Exchange 2000

Chat Service is running.

Collector: ChatSvrColl
MSEXCH_Cluster_Container Application Class
ClusterColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining data and populating
the Cluster consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.

PATROL Parameter Reference Manual 519

PATROL Parameter Reference Manual 520

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 6 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MaxFolderMsgs Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the maximum number of messages in any public
or private folder that is supported by this virtual server.

This parameter is active only if the server is hosting

storage groups that contain public or private store.

Collector: ClusterColl
PrivateFolders Y con 0–2147483647 undef undef set by coll graph folders
alarm
Displays the total number of private folders that are
supported by this virtual server.

This parameter is active only if the server is hosting

storage groups that contain private stores.

Collector: ClusterColl
PublicFolders Y con 0–2147483647 undef undef set by coll graph folders
alarm
Displays the total number of public folders that are
supported by this virtual server.

This parameter is active only if the server is hosting

storage groups that contain private stores.

Collector: ClusterColl
ServerMessages Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the total number of messages in all stores that
are supported by this virtual server.

This parameter is active only if the server is hosting

storage groups that contain public or private stores.

Collector: ClusterColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 7 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ServerMsgSize Y con 0–2147483647 undef undef set by coll graph MB
alarm
Displays the total size of the messages in all stores that
are supported by this virtual server.

This parameter is active only if the server is hosting

storage groups that contain public or private stores.

Collector: ClusterColl
TrackLogFiles Y con 0–2147483647 100–max 2147483647 set by coll graph files
alarm alarm (inactive by
Displays the total number of message tracking log files default)
for this virtual server. This parameter has a built-in alarm
recovery action (inactive by default) that purges the (inactive by
message tracking database log files when the default)
TrackLogFiles parameter to go into an alarm state.

Collector: ClusterColl
TrackLogSize Y con 0–100000 90-110 110 set by coll graph MB
alarm warn alarm
Displays the total size of the message tracking log files for (inactive by
this virtual server. default)

Collector: ClusterColl
MSEXCH_Cluster_Resources Application Class
State Y std 0–6 3–4 5–6 60 sec graph 0 = Initializing
alarm warn alarm 1 = Online Pending
Displays the status of the Exchange cluster resource 2 = Online
group 3 = Offline Pending
4 = Offline
This parameter sets its own value. 5 = Failed
6 = Unknown

PATROL Parameter Reference Manual 521

PATROL Parameter Reference Manual 522

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 8 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_Conference_Performance Application Class
ConferenceColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Conference consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
Conferences Y con 0–2147483647 undef undef set by coll graph conferences
alarm
Displays the number of active conferences in progress.

Collector: ConferenceColl
Profiles Y con 0–2147483647 undef undef set by coll graph conferences
alarm
Displays the number of scheduled conferences in the
conference profile store.

Collector: ConferenceColl
Scheduled Y con 0–2147483647 undef undef set by coll graph conferences
alarm
Displays the number of scheduled conferences in the
conference server.

Collector: ConferenceColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 9 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_Database Application Class
CachePgFaultsPerSec Y con 0–2147483647 undef undef set by coll graph page faults
alarm
Displays the number of database file page requests that
require the database cache manager to allocate a new
page from the database cache.

Tip: If the number of requests per second is high, the

database cache may be too small. You may want to
allocate more memory to the Exchange Server using the
PerfWiz utility. If Exchange Server is already using the
full server memory, you may need to add more memory
to the machine. Inspect the additional memory and
available memory parameters to determine if the server
may need additional memory.

Collector: DatabaseColl
DatabaseColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the
Database consumer parameters. When such errors occur,
the text description of the problem is set as the parameter
value and the parameter goes into an ALARM or
WARNING state.
LogThreadsWaiting Y con 0–2147483647 6–10 11–max set by coll graph threads
alarm warn alarm
Displays the number of threads waiting for their data to
be written to the log to complete an update of the
database. If this number is too high, the log may be a
bottleneck and you may need to establish a dedicated log
drive. PATROL for Exchange Server provides a built-in
report for this parameter.

Collector: DatabaseColl

PATROL Parameter Reference Manual 523

PATROL Parameter Reference Manual 524

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 10 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TblOpenCacheHitPct Y con 0–100 undef undef set by coll graph percentage of tables
alarm
Displays the percentage of database tables opened using
cached schema information. If this percentage is too low,
the table cache size may be too small.

Collector: DatabaseColl
MSEXCH_DataConf_Server Application Class
DataConfColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Data Conference consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
FailedJoinPct Y con 0–100 75–90 91–100 set by coll gauge percentage of users
alarm warn alarm
Displays the percentage of users who tried to join a
conference and failed.

Collector: DataConfColl
FailedMcu Y con 0–2147483647 undef undef set by coll graph T.120 MCUs
alarm
Displays the number of failed T.120 MCUs.

Collector: DataConfColl
FailedUserJoins Y con 0–2147483647 undef undef set by coll graph attempts
alarm
Displays the number of times in the last collection cycle
that a user tried to join a conference and failed.

Collector: DataConfColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 11 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_DB_Private Application Class
AvgDeliverTime Y con undef undef undef set by coll graph tens of milliseconds

Displays the average length of time between the client

submitting a message to the private information store and
the information store delivering the message to the MTA.

PATROL uses the last 10 messages to compute the

average.

Collector: DBPrivateColl
Categorizations Y con undef undef undef set by coll graph categorizations

Displays the number of categorizations in the private

information store.

Categorizations are created when a user creates a view or

performs a search. If the number of categorizations are
unusually high, performance can be affected.

Collector: DBPrivateColl
DbFileSize Y con undef undef undef set by coll graph kilobytes

Displays the size of the private information store

database file (.edb).

Collector: DBPrivateColl

PATROL Parameter Reference Manual 525

PATROL Parameter Reference Manual 526

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 12 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DBPrivateColl Y std NA NA NA 60 sec text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Private Database consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
FreeDBSpaceAvailForDefrag N con undef undef undef set by coll graph megabytes

Displays the amount of free space that will be available if

an offline defragmentation is performed.

Collector: DBPrivateColl
FreeDBSpaceAvailForDefragRpt N con undef undef undef set by coll text none

Displays the amount of free space that will be available if

an offline defragmentation is performed.

Collector: DBPrivateColl
FreeDiskSpaceOnThisDrive Y con undef undef undef set by coll graph megabytes

Displays the free space on the disk partition containing

the database.

Collector: DBPrivateColl
MsgSentPerMin Y con undef undef undef set by coll graph messages per min

Displays the rate that private information store messages

are sent to other storage providers via the MTA.

Collector: DBPrivateColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 13 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MsgSubmitPerMin Y con undef undef undef set by coll graph messages per min

Displays the rate that clients submit messages to the

private information store.

Collector: DBPrivateColl
PercentFragmentation N con 0–100 50–85 85–100 set by coll graph percentage
OK warn alarm
Displays the percent defragmentation as the total
defragmented space in the database divided by the total
size of the database.

Collector: DBPrivateColl
RecvQueueSize Y con undef undef undef set by coll graph messages

Displays the total size of the replication messages

received from remote servers that are waiting in the
public information store receive queue.

Collector: DBPrivateColl
SendQueueSize Y con undef undef undef set by coll graph messages

Displays the number of messages in the private

information store send queue.

Collector: DBPrivateColl
Status Y con 0–3 1–1 2–3 set by coll graph 0 = online (OK)
OK alarm warn 1 = offline (Alarm)
Displays the status of the private information store. 2= mounting (Warn)
3 = dismounting
Collector: DBPrivateColl (Warn)

PATROL Parameter Reference Manual 527

PATROL Parameter Reference Manual 528

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 14 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
StmFileSize Y con undef undef undef set by coll graph KB

Displays the size of the private information store

streaming file (.stm).

Collector: DBPrivateColl
MSEXCH_DB_Public Application Class
AvgDeliverTime Y con undef undef undef set by coll graph tens of milliseconds

Displays the average length of time between the client

submitting a message to the public information store and
the information store delivering the message to the MTA.

PATROL uses the last 10 messages to compute the

average.

Collector: DBPublicColl
Categorizations Y con undef undef undef set by coll graph categorizations

Displays the number of categorizations in the public

information store.

Categorizations are created when a user creates a view or

performs a search. If the number of categorizations are
unusually high, performance can be affected.

Collector: DBPublicColl
DbFileSize Y con undef undef undef set by coll graph kilobytes

Displays the size of the public information store database

file (.edb).

Collector: DBPublicColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 15 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DBPublicColl Y std NA NA NA 60 sec text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Public Database consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
FreeDBSpaceAvailForDefrag N con undef undef undef set by coll graph megabytes

Displays the amount of free space that will be available if

an offline defragmentation is performed.

Collector: DBPublicColl
FreeDBSpaceAvailForDefragRpt N con undef undef undef set by coll text none

Displays the amount of free space that will be available if

an offline defragmentation is performed.

Collector: DBPublicColl
FreeDiskSpaceOnThisDrive Y con undef undef undef set by coll graph megabytes

Displays the free space on the disk partition containing

the database.

Collector: DBPublicColl
MsgSentPerMin Y con undef undef undef set by coll graph messages per min

Displays the rate that public information store messages

are sent to other storage providers via the MTA.

Collector: DBPublicColl

PATROL Parameter Reference Manual 529

PATROL Parameter Reference Manual 530

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 16 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MsgSubmitPerMin Y con undef undef undef set by coll graph messages per min

Displays the rate that clients submit messages to the

public information store.

Collector: DBPrivateColl
PercentFragmentation N con 0–100 50–85 85–100 set by coll graph percentage
OK warn alarm
Displays the percent defragmentation as the total
defragmented space in the database divided by the total
size of the database.

Collector: DBPublicColl
RecvQueueSize Y con undef undef undef set by coll graph messages

Displays the number of messages in the public

information store receive queue.

Collector: DBPublicColl
ReplMsgRecvRate Y con undef undef undef set by coll graph messages per sec

Displays the rate that messages in the public information

store are received via replication from remote servers.

Collector: DBPublicColl
ReplMsgSendRate Y con undef undef undef set by coll graph messages per sec

Displays the rate that messages in the public information

store are replicated to remote servers.

Collector: DBPublicColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 17 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ReplRecvQueueSize Y con undef undef undef set by coll graph messages

Displays the number of messages in the public

information store replication queue.

If this value is unusually large, messages may be building

in the queue because the server cannot connect with the
receiving server.

Collector: DBPublicColl
SendQueueSize Y con undef undef undef set by coll graph messages

Displays the number of messages in the public

information store send queue.

Collector: DBPublicColl
Status Y con 0–3 1–1 2–3 set by coll graph 0 = online (OK)
OK alarm warn 1 = offline (Alarm)
Displays the status of the public information store 2= mounting (Warn)
3 = dismounting
Collector: DBPublicColl (Warn)
StmFileSize Y con undef undef undef set by coll graph KB

Displays the size of the public information store

streaming file (.stm).

Collector: DBPublicColl
MSEXCH_Directory Application Class
ABClientSessions Y con 0–2147483647 undef undef set by coll graph sessions
alarm
Displays the number of clients currently accessing the
Global Address Book.

Collector: DirectoryColl.

PATROL Parameter Reference Manual 531

PATROL Parameter Reference Manual 532

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 18 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AccessViolations Y con 0–2147483647 1–max undef set by coll graph violations
alarm warn
Displays the number of times that directory service write
operations were refused for security reasons.

Collector: DirectoryColl.
DirectoryColl Y std NA NA NA 10 min text none

Describes any errors that prevent the parameter from

obtaining perfmon data and populating the Directory
consumer parameters. When such errors occur, the text
description of the problem is set as the parameter value
and the parameter goes into an ALARM or WARNING
state.
SynchPending Y con 0–2147483647 undef undef set by coll graph synchronizations
alarm
Displays the number of directory synchronizations that
are queued for this server but not yet processed. If
SynchPending is high or increasing, you may need to
revisit your synchronization strategy. If SynchPending is
zero, your directories are not being synchronized.

Collector: DirectoryColl.
ThreadsInUse Y con 0–2147483647 11–20 21–max set by coll graph threads
alarm warn alarm
Lists the number of directory service RPC-generated
threads currently in API calls. You could use this value to
determine whether additional processors are needed.

Collector: DirectoryColl.
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 19 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_DSAccess_Cache Application Class
AsyncReadsPending Y con 0–2147483647 undef undef set by coll graph requests
alarm
Displays the number of outstanding asynchronous LDAP
read requests submitted to the DSA (Directory Service
Access).

If this value is high or rising, Exchange clients may be

experiencing delays when interacting with the
information store.

Collector: DSACacheColl
AsyncSearchesPending Y con 0–2147483647 undef undef set by coll graph requests
OK
Displays the number of outstanding asynchronous LDAP
search requests submitted to the DSA (Directory Service
Access).

If this value is high or rising, Exchange clients may be

experiencing delays when searching the information
store.

Collector: DSACacheColl
CacheMemory Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the size of the DSA (Directory Service Access)
cache.

Collector: DSACacheColl

PATROL Parameter Reference Manual 533

PATROL Parameter Reference Manual 534

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 20 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DSACacheColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the DSA Cache consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
PctMaxMemory Y con 0–100 90–95 96–100 set by coll gauge percentage of
alarm warn alarm memory
Displays the percentage of the DSA (Directory Service
Access) maximum cache memory that is currently in use.

Collector: DSACacheColl
MSEXCH_DSAccess_Contexts Application Class
AsyncReadsPending Y con 0–2147483647 undef undef set by coll gauge requests
alarm
Displays the number of outstanding LDAP read requests.

Collector: DSAContextsColl
AsyncSearchesPending Y con 0–2147483647 undef undef set by coll gauge requests
alarm
Displays the number of outstanding LDAP search
requests.

Collector: DSAContextsColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 21 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DSAContextColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the DSAContext consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
MSEXCH_DSAccess_Processes Application Class
DSAProcColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the DSAProc consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
LdapReadTime Y con 0–2147483647 undef undef set by coll graph msec
alarm
Displays the amount of time required by a client to send
an LDAP read request to the DSA and receive a response.

If this value is high or rising, Exchange clients may be

experiencing delays when interacting with the
information store.

Collector: DSAProcColl

PATROL Parameter Reference Manual 535

PATROL Parameter Reference Manual 536

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 22 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LdapSearchTime Y con 0–2147483647 undef undef set by coll graph msec
alarm
Displays the time required by a client to send a LDAP
search request to the DSA and receive a response.

If this value is high or rising, Exchange clients may be

experiencing delays when searching the information
store.

Collector: DSAProcColl
MSEXCH_Events Application Class
AvgEventTime Y con 0–2147483647 undef undef set by coll graph msec
alarm
Displays the average time spent in each event.

Collector: EventsColl.
AvgScriptTime Y con 0–2147483647 undef undef set by coll graph msec
alarm
Displays the average time spent in each script. If this
value is high, you may have inefficient scripts.

Collector: EventsColl.
EventsColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the Events
consumer parameters. When such errors occur, the text
description of the problem is set as the parameter value
and the parameter goes into an ALARM or WARNING
state.
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 23 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NotifyQueue Y con 0–2147483647 undef undef set by coll graph store notifications
alarm
Lists the number of store notifications waiting to be
processed.

Collector: EventsColl.
MSEXCH_ExIPC Application Class
ClientFailures Y con 0–2147483647 undef undef set by coll graph failures
alarm
Displays the number of PostQueuedCompletionStatus
failures on the client.

Collector: ExIPCColl
ClientQueLen Y con 0–2147483647 undef undef set by coll graph entries
alarm
Displays the length of the client-to-store output queue.

Collector: ExIPCColl
ExIPCColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the ExIPC parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
StoreFailures Y con 0–2147483647 undef undef set by coll graph failures
alarm
Displays the number of PostQueuedCompletionStatus
failures on the information store.

Collector: ExIPCColl

PATROL Parameter Reference Manual 537

PATROL Parameter Reference Manual 538

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 24 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
StoreQueLen Y con 0–2147483647 undef undef set by coll graph entries
alarm
Displays the length of the store-to-client output queue.

Collector: ExIPCColl
MSEXCH_GroupWise_Connector Application Class
GWColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the GroupWise consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
InQueueLen Y con 0–2147483647 undef undef set by coll graph entries
alarm
Displays the number of messages that were sent to
Exchange from the Novell GroupWise server and are
waiting to be delivered to clients.

Collector: GWColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 25 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NDRRecv Y con 0–2147483647 undef undef set by coll graph non-delivery reports
alarm
Displays the number of non-delivery reports (NDRs)
received from the connected Novell GroupWise server
during the collection cycle.

This value represents the number of messages that were

sent from the Exchange server to the GroupWise that
could not be delivered to a recipient. Possible causes for
an NDR include:

–the GroupWise connector is not configured properly

–the recipient no longer exists

Collector: GWColl
NDRSent Y con 0–2147483647 undef undef set by coll graph non-delivery reports
alarm
Displays the number of non-delivery reports (NDRs) sent
to the connected Novell GroupWise server during the
collection cycle.

This value represents the number of messages that were

sent from the GroupWise server to the Exchange server
that could not be delivered to a recipient. Possible causes
for an NDR include:

–the GroupWise connector is not configured properly

–the recipient no longer exists

Collector: GWColl

PATROL Parameter Reference Manual 539

PATROL Parameter Reference Manual 540

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 26 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OutQueueLen Y con 0–2147483647 undef undef set by coll graph entries
alarm
Displays the number of messages queued for delivery to
the Novell GroupWise server.

Collector: GWColl
MSEXCH_HTTP_Server Application Class
AuthFailRate Y con 0–2147483647 undef undef set by coll graph requests per sec
alarm
Displays the rate that the Exchange server is sending "401
Unauthorized" responses to clients.

An unusually high rate of these responses could indicate

that someone is attempting unauthorized access of the
web store.

Collector: HttpColl
BadRequestRate Y con 0–2147483647 undef undef set by coll graph requests per sec
alarm
Displays the rate that the Exchange server is sending "400
Bad Request" responses to clients.

Collector: HttpColl
ExceptionRate Y con 0–2147483647 undef undef set by coll graph exceptions per sec
alarm
Displays the rate of exceptions experienced by the server.

Collector: HttpColl
ForbiddenRate Y con 0–2147483647 undef undef set by coll graph requests per sec
alarm
Displays the rate that the Exchange server is sending "403
Forbidden" HTTP responses to clients.

Collector: HttpColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 27 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
HttpColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the HTTP Server consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
MethodFailRate Y con 0–2147483647 undef undef set by coll graph requests per sec
alarm
Displays the rate that the Exchange server is sending "424
Method Fail" HTTP responses to clients.

Collector: HttpColl
NoServiceRate Y con 0–2147483647 undef undef set by coll graph requests per sec
alarm
Displays the rate that the Exchange server is sending "503
Service Unavailable" responses to clients.

Collector: HttpColl
RequestRate Y con 0–2147483647 undef undef set by coll graph requests per sec
alarm
Displays the rate that the Exchange server is receiving
HTTP requests.

Collector: HttpColl
ServerErrorRate Y con 0–2147483647 undef undef set by coll graph requests per sec
alarm
Displays the rate that the Exchange server is sending "500
Server Error" HTTP responses to clients.

Collector: HttpColl

PATROL Parameter Reference Manual 541

PATROL Parameter Reference Manual 542

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 28 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_IM_Server Application Class
IMColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the IM Server consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
InByteRate Y con 0–100 undef undef set by coll graph bytes per sec
alarm
Displays the number of instant messaging bytes read
over the network.

Collector: IMColl
OutByteRate Y con 0–100 undef undef set by coll graph byte per sec
alarm
Displays the number of instant messaging bytes sent over
the network.

Collector: IMColl
ReqFailRate Y con 0–100 undef undef set by coll graph failures per sec
alarm
Displays number of instant messaging requests that
failed.

Collector: IMColl
ReqRejectRate Y con 0–100 undef undef set by coll graph requests per sec
alarm
Displays the number of instant messaging requests
rejected.

Collector: IMColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 29 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
RespFailRate Y con 0–100 undef undef set by coll graph responses per sec
alarm
Displays the number of instant messaging responses not
sent.

Collector: IMColl
Subscriptions Y con 0–2147483647 undef undef set by coll graph subscriptions
alarm
Displays the number of subscriptions currently active.

Collector: IMColl
Users Y con 0–2147483647 undef undef set by coll graph users
alarm
Displays the number of instant messaging users currently
online.

Collector: IMColl
MSEXCH_IM_Virtual_Server Application Class
IMVirtualColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the IM Virtual Server consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
InByteRate Y con 0–100 undef undef set by coll graph bytes per sec
alarm
Displays the number of instant messaging bytes read
over the network.

Collector: IMVirtualColl

PATROL Parameter Reference Manual 543

PATROL Parameter Reference Manual 544

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 30 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OutByteRate Y con 0–100 undef undef set by coll graph bytes per sec
alarm
Displays the number of instant messaging bytes sent over
the network.

Collector: IMVirtualColl
ReqFailRate Y con 0–100 undef undef set by coll graph failures per sec
alarm
Displays number of instant messaging requests that
failed.

Collector: IMVirtualColl
ReqRejectRate Y con 0–100 undef undef set by coll graph requests per sec
alarm
Displays the number of instant messaging requests
rejected.

Collector: IMVirtualColl
RespFailRate Y con 0–100 undef undef set by coll graph responses per sec
alarm
Displays the number of instant messaging responses not
sent.

Collector: IMVirtualColl
Subscriptions Y con 0–2147483647 undef undef set by coll graph subscriptions
alarm
Displays the number of subscriptions currently active.

Collector: IMVirtualColl
Users Y con 0–2147483647 undef undef set by coll graph users
alarm
Displays the number of instant messaging users currently
online.

Collector: IMVirtualColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 31 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_IMAP4_Server Application Class
CmdFailRate Y con 0–2147483647 undef undef set by coll graph failures per sec
alarm
Displays the number of IMAP4 commands that failed per
second.

Collector: IMAP4Coll
CmdRecvRate Y con 0–2147483647 undef undef set by coll graph commands per sec
alarm
Displays the number of IMAP4 commands received per
second.

Collector: IMAP4Coll
IMAP4Coll Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the IMAP4 Sever consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
InvalidCmdRate Y con 0–2147483647 undef undef set by coll graph commands per sec
alarm
Displays the number of invalid IMAP4 commands
received per second.

Collector: IMAP4Coll
MSEXCH_Inet_Mail Application Class
FailedConversions Y con 0–2147483647 undef undef set by coll graph conversions
alarm
The number of conversions between Internet format and
Exchange format that failed.

Collector: InetMailColl.

PATROL Parameter Reference Manual 545

PATROL Parameter Reference Manual 546

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 32 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
InBytesPerHour Y con 0–2147483647 undef undef set by coll graph bytes per hr
alarm
Indicates the rate that bytes are transferred to the
Exchange Server from the Internet.

Collector: InetMailColl.
InBytesQueued Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the size of the messages that have been
converted from Internet mail and are awaiting final
delivery within the Exchange Server.

Collector: InetMailColl
InetMailColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the
InetMail consumer parameters. When such errors occur,
the text description of the problem is set as the parameter
value and the parameter goes into an ALARM or
WARNING state.
InMsgPerHr Y con undef undef undef set by coll graph number of messages
per hour
Displays the average number of messages received in the
past hour from the Internet that were converted to
Exchange format and waiting for final delivery to the
Information Store.

Tip: Typically this queue exhibits a pattern of growing

and then falling back toward zero. If the queue increases
steadily over time without recovering, you may have a
problem with your Exchange Serve.

Collector: InetMailColl.
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 33 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
InMsgQueued Y con 0–2147483647 10–30 31–max set by coll graph messages
alarm warn alarm
Displays the number of messages received from the
Internet that were converted to Exchange format and are
awaiting final delivery to the Information Store.

Tip: Typically this queue exhibits a pattern of growing

and then falling back toward zero. If the queue increases
steadily over time without recovering, you may have a
problem with your Exchange Server.

Collector: InetMailColl.
OutBytesPerHour Y con 0–2147483647 undef undef set by coll graph bytes per hr
alarm
Displays the rate that bytes are transferred from the
Exchange Server to the Internet.

Tip: If this value is low, either the server or the receiving

machine may have a problem.

Collector: InetMailColl.
OutBytesQueued Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the size of the messages waiting to be converted
to Internet mail format.

Tip: If this value is high, a problem on the Internet, such

as a malfunctioning router or server, may be preventing
messages from going out.

Collector: InetMailColl.

PATROL Parameter Reference Manual 547

PATROL Parameter Reference Manual 548

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 34 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OutMsgPerHr Y con undef undef undef set by coll graph messages per hour

Displays the average number of messages sent by the

Exchange Server to the Internet Mail Connector during
the last hour that were waiting to be converted to Internet
Mail format.

Tip: Typically this queue exhibits a pattern of growing

and then falling back toward zero. If the queue increases
steadily over time without recovering, you may have a
problem with the Exchange Internet Mail Connector or
with your Internet connection.

Collector: InetMailColl.
OutMsgQueued Y con 0–2147483647 10–30 31–max set by coll graph messages
alarm warn alarm
Displays the number of messages sent by the Exchange
Server to the Internet Mail Connector that are waiting to
be converted to Internet Mail format.

Tip: Typically this queue exhibits a pattern of growing

and then falling back toward zero. If the queue increases
steadily over time without recovering, you may have a
problem with the Exchange Internet Mail Connector or
with your Internet connection.

Collector: InetMailColl.
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 35 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
QueuedInbound Y con 0–2147483647 10–30 31–max set by coll graph messages
alarm warn alarm
Displays the number of messages received from the
Internet that are waiting to be converted to Exchange
format.

Tip: Typically this queue exhibits a pattern of growing

and then falling back toward zero. If the queue increases
steadily over time without recovering, you may have a
problem with your Exchange Server or with the Exchange
Internet Mail.

Collector: InetMailColl.
QueuedOutbound Y con 0–2147483647 10–30 31–max set by coll graph messages
alarm warn alarm
Displays the number of messages received by the Internet
Mail Connector that are waiting to be converted to
Internet Mail format.

Tip: Typically this queue exhibits a pattern of growing

and then falling back toward zero. If the queue increases
steadily over time without recovering, you may have a
problem with your Internet connection.

Collector: InetMailColl.
TotMsgQueued Y con 0–2147483647 10–30 31–max set by coll graph messages
alarm warn alarm
Displays the total of InMsgQueued and OutMsgQueued:
OutMsgQueued – the number of messages sent by the
Exchange Server to the Internet Mail Connector that are
waiting to be converted to Internet Mail format.
InMsgQueued – the number of messages received from
the Internet that have been converted to Exchange format
and are awaiting final delivery to the Information Store.

Collector: InetMailColl.

PATROL Parameter Reference Manual 549

PATROL Parameter Reference Manual 550

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 36 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_Inet_Protocols Application Class
ActiveConnections Y con 0–2147483647 undef undef set by coll graph connections
alarm
Displays the number of currently active connections that
are using the Internet protocol. PATROL for Exchange
Server provides a built-in report for this parameter.

Collector: InetProtocolsColl.
BytesRecvPerSec Y con 0–2147483647 undef undef set by coll graph bytes per sec
alarm
Displays the rate that clients send bytes to the Exchange
Server using the Internet protocol.

Collector: InetProtocolsColl.
BytesSentPerSec Y con 0–2147483647 undef undef set by coll graph bytes per sec
alarm
Displays the rate that the Exchange Server sends bytes to
clients using the Internet protocol.

Collector: InetProtocolsColl.
InQueueSize Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the number of bytes in the incoming queue of
the Internet protocol.

Collector: InetProtocolsColl
InetProtocolsColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the
InetProtocols consumer parameters. When such errors
occur, the text description of the problem is set as the
parameter value and the parameter goes into an ALARM
or WARNING state.
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 37 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OutQueueSize Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the number of bytes in the outgoing queue of
the Internet protocol.

Collector: InetProtocolsColl
MSEXCH_IS Application Class
ActiveConnectionCount Y con 0–2147483647 undef undef set by coll graph processes
alarm
Displays the number of clients that have interacted with
the information store in the last 10 minutes. Examples of
interaction include reading and sending mail.

Collector: ISColl
ActiveUserCount Y con 0–2147483647 undef undef set by coll graph users
alarm
Displays the number of users that have shown some
activity in the last 10 minutes. If some users have multiple
connections, ActiveUserConnects could be lower than
ActiveConnections.

Collector: ISColl
ConnectionCount Y con 0–2147483647 undef undef set by coll graph processes
alarm
Displays the number of client processes connected to the
information store. PATROL for Exchange Server provides
a built-in report for this parameter.

Collector: ISColl
DbSessionHitRate Y con 0–100 20–39 39 set by coll graph percentage hit rate
alarm warn alarm
Displays the percent hit rate on reusing database sessions.

Collector: ISColl

PATROL Parameter Reference Manual 551

PATROL Parameter Reference Manual 552

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 38 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ISColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the IS
consumer parameters. When such errors occur, the text
description of the problem is set as the parameter value
and the parameter goes into an ALARM or WARNING
state.
RPCRequests Y con 0–2147483647 undef undef set by coll graph number of client
alarm requests
Displays the number of client connections currently being
processed by the IS.

Collector: ISColl
UserCount Y con 0–2147483647 undef undef set by coll graph users
alarm
Displays the number of users connected to the
information store. PATROL for Exchange Server provides
a built-in report for this parameter.

Collector: ISColl
MSEXCH_IS_Container Application Class
InformationStoresColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the IS
consumer parameters. When such errors occur, the text
description of the problem is set as the parameter value
and the parameter goes into an ALARM or WARNING
state.
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 39 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_IS_Private Application Class
AvgDeliverTime Y con 0–2147483647 300–max max set by coll graph sec
alarm warn alarm
Displays the average length of time between the client (inactive by
submitting a message to the private information store and default)
the information store delivering the message to the MTA.
PATROL uses the last 10 messages to compute the
average.

Collector: ISPrivateColl
DBFileSize Y con undef undef undef set by coll graph megabytes

Displays the total size of the database.

Collector: ISPrivateColl
FolderOpensPerSec Y con 0–2147483647 undef undef set by coll graph rate of folder open
alarm requests per second
Displays the rate that requests to open folders are
submitted to the Information Store.

Collector: ISPrivateColl
FreeDBSpaceAvailForDefrag N con 0–100 0–100 100 set by coll graph megabytes
OK OK OK
Displays the amount of free space that will be available if
an offline defragmentation is performed.

Collector: ISPrivateColl
FreeDBSpaceAvailForDefragRpt N con 0–100 0–100 100 set by coll text none
OK OK OK
Displays the amount of free space that will be available if
an offline defragmentation is performed.

Collector: ISPrivateColl

PATROL Parameter Reference Manual 553

PATROL Parameter Reference Manual 554

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 40 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FreeDiskSpaceOnThisDrive Y con undef undef undef set by coll graph megabytes

Displays the free space on the disk partition containing

the database.

Collector: ISPrivateColl
ISPrivateColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the
ISPrivate consumer parameters. When such errors occur,
the text description of the problem is set as the parameter
value and the parameter goes into an ALARM or
WARNING state.
MessageOpensPerSec Y con 0–2147483647 undef undef set by coll graph messages opened per
alarm second
Displays the rate that messages are being opened by users
within the Public Store.

Collector: ISPrivateColl
MsgSentPerMin Y con 0–2147483647 undef undef set by coll graph messages per min
alarm
Displays the rate that the MTA sends private information
store messages to private information stores on remote
Exchange Servers.

Collector: ISPrivateColl
MsgSubmitPerMin Y con 0–2147483647 undef undef set by coll graph messages per min
alarm
Displays the rate that private information store messages
are submitted by clients.

Collector: ISPrivateColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 41 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PercentFragmentation N con 0–100 50–85 85–100 set by coll graph percentage
OK warn alarm
Displays the percent defragmentation as the total
defragmented space in the database divided by the total
size of the database.

Collector: ISPrivateColl
SendQueueSize Y con 0–2147483647 10–30 31–max set by coll graph messages
alarm warn alarm
Displays the number of messages in the private
information store send queue waiting to be sent to the
MTA. If SendQueueSize is high or increasing, the MTA
may be down or performing poorly, and you will likely
experience slow mail delivery. According to Microsoft,
SendQueueSize should not exceed 0.5 - 1.0% of connected
users.

Tip: If you suspect that the private information store send

queue is a bottleneck, try the following: move some or all
of the mailboxes to another server; use multiple disk
controllers; limit the amount or type of mail that users
can send; add more disks to the stripe set; add one or
more caching disk controllers that cache read and write
operations.

Collector: ISPrivateColl
MSEXCH_IS_Public Application Class
AvgDeliverTime Y con undef undef undef set by coll graph seconds

Displays the average length of time between the client

submitting a message to the public information store and
the information store delivering the message to the MTA.
PATROL uses the last 10 messages to compute the
average.

Collector: ISPublicColl

PATROL Parameter Reference Manual 555

PATROL Parameter Reference Manual 556

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 42 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DBFileSize Y con undef undef undef set by coll graph megabytes

Displays the total size of the database.

Collector: ISPublicColl
FolderOpensPerSec Y con 0–2147483647 undef undef set by coll graph rate of folder open
alarm requests per second
Displays the rate that requests to open folders are
submitted to the Information Store.

Collector: ISPublicColl
FreeDBSpaceAvailForDefrag N con 0–100 0–100 100 set by coll graph megabytes
OK OK OK
Displays the amount of free space that will be available if
an offline defragmentation is performed.

Collector: ISPublicColl
FreeDBSpaceAvailForDefragRpt N con 0–100 0–100 100 set by coll text none
OK OK OK
Displays the amount of free space that will be available if
an offline defragmentation is performed.

Collector: ISPublicColl
FreeDiskSpaceOnThisDrive Y con undef undef undef set by coll graph megabytes

Displays the amount of free space that will be available if

an offline defragmentation is performed.

Collector: ISPublicColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 43 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ISPublicColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the ISPublic
consumer parameters. When such errors occur, the text
description of the problem is set as the parameter value
and the parameter goes into an ALARM or WARNING
state.
MessageOpensPerSec Y con 0–2147483647 undef undef set by coll graph messages opened per
alarm second
Displays the rate that messages are being opened by users
within the Public Store.

Collector: ISPublicColl
MsgSentPerMin Y con 0–2147483647 undef undef set by coll graph messages per min
alarm
Displays the rate that the MTA sends public information
store messages to private information stores on remote
Exchange Servers.

Collector: ISPublicColl
MsgSubmitPerMin Y con 0–2147483647 undef undef set by coll graph messages per min
alarm
Displays the rate that public information store messages
are submitted by clients.

Collector: ISPublicColl
PercentFragmentation N con 0–100 50–85 85–100 set by coll graph percentage
OK warn alarm
Displays the percent defragmentation as the total
defragmented space in the database divided by the total
size of the database.

Collector: ISPublicColl

PATROL Parameter Reference Manual 557

PATROL Parameter Reference Manual 558

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 44 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SendQueueSize Y con 0–2147483647 10–30 31–max set by coll graph messages
alarm warn alarm
Displays the number of messages in the public
information store send queue that are waiting to be sent
to the MTA. If SendQueueSize is high or increasing, the
MTA may be down or performing poorly, and you will
likely experience slow mail delivery.

Tip: If you suspect that the public information store send

queue is a bottleneck, consider the following actions:
configure the public folder replication to occur less
frequently; move some or all of the public folders to
another server; use multiple disk controllers; add more
disks to the stripe set; add one or more caching disk
controllers that cache read and write operations.

Collector: ISPublicColl
MSEXCH_IS_Service Application Class
ISPerformanceColl Y std NA NA NA 10 min text none

Collects the information used by the

MSEXCH_Performance application class.
MsgDeliveryRateToAllRecipients Y con 0–2147483647 undef undef set by coll graph messages per minute
alarm
Displays the rate that messages are delivered to all
recipients.

Collector: ISPerformanceColl
MsgReceivedRateByRecipients Y con 0–2147483647 undef undef set by coll graph messages per minute
alarm
Displays the rate that messages are received by recipients.

Collector: ISPerformanceColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 45 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MsgSendRateToRoutingEngine Y con 0–2147483647 undef undef set by coll graph messages per minute
alarm
Displays the rate that messages are sent to the Transport
Core (Routing Engine).

Collector: ISPerformanceColl
MsgSubmitRateByClients Y con 0–2147483647 undef undef set by coll graph messages per minute
alarm
Displays the per minute rate messages are submitted by
clients.

Collector: ISPerformanceColl
MSEXCH_Lotus_Connector Application Class
CcMailMsgsPerHour Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages per hour sent to
Exchange from Lotus cc:Mail.

Collector: LotusConnectorColl
DirSynchUpdates Y con 0–2147483647 undef undef set by coll graph updates
alarm
Displays the number of directory updates sent to Lotus
cc:Mail since the last directory synchronization started.

Collector: LotusConnectorColl
ExchangeMsgsPerHour Y con 0–2147483647 undef undef set by coll graph messages per hr
alarm
Displays the number of messages sent to Lotus cc:Mail
from Exchange.

Collector: LotusConnectorColl

PATROL Parameter Reference Manual 559

PATROL Parameter Reference Manual 560

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 46 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LotusConnectorColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the Lotus
Connector consumer parameters. When such errors
occur, the text description of the problem is set as the
parameter value and the parameter goes into an ALARM
or WARNING state.
MSEXCH_Lotus_Notes Connector Application Class
InboundQueue Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages in the Lotus Notes
connector that are queued for delivery to the Exchange
server.

If the queue length is above zero for an extended period

of time, you may have a problem with the Lotus Notes
connector or the receiving server.

Collector: NotesColl
MsgBytesRecv Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the number of message bytes received from the
Lotus Notes system during the collection cycle.

Collector: NotesColl
MsgBytesSent Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the number of message bytes sent to the Lotus
Notes system during the collection cycle.

Collector: NotesColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 47 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MsgsRecv Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages received from the Lotus
Notes system during the collection cycle.

Collector: NotesColl
MsgsSent Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages sent to the Lotus Notes
system during the collection cycle.

Collector: NotesColl
NonDeliveryRpts Y con 0–2147483647 undef undef set by coll graph non-delivery reports
alarm
Displays the number of non-delivery reports (NDRs)
received from the Lotus Notes system during the
collection cycle.

Collector: NotesColl
NotesColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Lotus Notes Connector consumer
parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.

PATROL Parameter Reference Manual 561

PATROL Parameter Reference Manual 562

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 48 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
OutboundQueue Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages in the Lotus Notes
connector that are queued for delivery to the Lotus Notes
server.

If the queue length increases or remains above zero for an

extended period of time, the Lotus Notes server may be
down or you may have a network problem.

Collector: NotesColl
MSEXCH_MCUConf_Server Application Class
ByteRecvRate Y con 0–100 undef undef set by coll graph bytes per sec
alarm
Displays the rate that bytes are received by this T120
server.

Collector: MCUConfColl
ByteSentRate Y con 0–100 undef undef set by coll graph bytes per sec
alarm
Displays the rate that the conference server sends bytes to
conference clients using the T.120 Multipoint Control
Unit (MCU) protocol.

Collector: MCUConfColl
MCUConfColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the MCU Conference Server consumer
parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 49 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_MonitoredServers Application Class
PercentOfTotalRecv Y con 0–2147483647 undef undef set by coll graph percentage
alarm
Percentage of the total traffic received.

Collector: MSEXCHSentMailColl
PercentOfTotalSent Y con 0–2147483647 undef undef set by coll graph percentage
alarm
Percentage of the total traffic sent.

Collector: MSEXCHSentMailColl
RecvBytes Y con 0–2147483647 undef undef set by coll graph kilobytes
alarm
Displays the total number of bytes received by this server
from the remote server in the last polling cycle.

Collector: MSEXCHSentMailColl
RecvMsgs Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the total number of messages received by this
server from the remote server in the last pollinc cycle.

Collector: MSEXCHSentMailColl
SentBytes Y con 0–2147483647 undef undef set by coll graph kilobytes
alarm
Displays the total number of bytes sent to the remote
server in the last polling cycle.

Collector: MSEXCHSentMailColl
SentMsgs Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages sent to the remote
server in the last polling cycle.

Collector: MSEXCHSentMailColl

PATROL Parameter Reference Manual 563

PATROL Parameter Reference Manual 564

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 50 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_MsMail_Connector Application Class
MsMailColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the MsMail
consumer parameters. When such errors occur, the text
description of the problem is set as the parameter value
and the parameter goes into an ALARM or WARNING
state.
RecvKbPerHour Y con 0–2147483647 undef undef set by coll graph KB per hr
alarm
Displays the kilobytes upload rate to the Exchange Server
from the MS Mail Connector Interchange.

Collector: MsMailColl
SentMsgsPerHour Y con 0–2147483647 undef undef set by coll graph messages per hr
alarm
Displays the rate that messages are downloaded from the
Exchange Server to the MS Mail Connector Interchange.

Collector: MsMailColl
MSEXCH_MsMQ_Connector Application Class
BytesIn Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the number of bytes sent to Exchange Server
through the MsMQ Exchange connector in the last hour.
If you don't have an MsMQ connector, this parameter is
not instantiated.

Collector: MsMQConnectorColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 51 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BytesOut Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the number of bytes sent to the MsMQ Exchange
connector from Exchange in the last hour. If you don't
have an MsMQ connector, this parameter is not
instantiated.

Collector: MsMQConnectorColl
MsMQConnectorColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the
MsMQConnector consumer parameters. When such
errors occur, the text description of the problem is set as
the parameter value and the parameter goes into an
ALARM or WARNING state.
WaitingBytesIn Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the number of bytes in the MSMQ Exchange
Connector inbound folder waiting to be transferred to the
Exchange Server. If you don't have an MsMQ connector,
this parameter is not instantiated.

Collector: MsMQConnectorColl
WaitingBytesOut Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the number of bytes in the MsMQ Exchange
Connector outbound folder waiting to be transferred out
to the message queue server. If WaitingBytesOut is high
or increasing, you may have a problem with the message
queue server. If you don't have an MsMQ connector, this
parameter is not instantiated.

Collector: MsMQConnectorColl

PATROL Parameter Reference Manual 565

PATROL Parameter Reference Manual 566

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 52 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_MTA Application Class
AdjacentMTAOpens Y con 0–2147483647 undef undef set by coll graph associations
alarm
Displays the number of open associations that this MTA
has with other MTAs, including MTAs within the site and
outside of the site.

Collector: MTAColl
AdminConnects Y con 0–2147483647 undef undef set by coll graph connects
alarm
Displays the number of Exchange Administrator
programs connected to this MTA.

Collector: MTAColl
FailedConvertRatio Y con 0–2147483647 undef undef set by coll graph ratio of failed
alarm message conversions
Displays the ratio of failed message conversions to to successful ones
successful message conversions since the MTA was
initialized.

Collector: MTAColl
FailedMsgConverts Y con 0–100 10–20 21–100 set by coll graph messages
alarm warn alarm
Displays the total number of messages that failed to be
converted from one form to another during the collection
cycle.

Collector: MTAColl
MsgBytesPerSec Y con 0–2147483647 undef undef set by coll graph bytes per second
alarm
Displays the rate that messages are processed by the
MTA.

Collector: MTAColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 53 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MTAColl Y coll NA NA NA 60 sec text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the MTA
consumer parameters. When such errors occur, the text
description of the problem is set as the parameter value
and the parameter goes into an ALARM or WARNING
state.
QueueGrowth Y std 0–2147483647 10–max undef 60 sec graph number of
alarm alarm unprocessed
the rate that the MTA queue is growing messages per minute

this parameter is based on the following parametrs:

■ WorkQueueLength
■ MsgBytesPerSec

This parameter has a built-in recovery action (inactive by

default) that restarts the MTA when queue messages are
not being processed.

Collector: MTAColl
WorkQueueLength Y con 0–2147483647 10–30 31–max set by coll graph messages
alarm warn alarm
Displays the total number of messages currently stored in
the MTA. This number includes inbound and outbound
messages for the Information Store, the Directory, and
any MTA connectors. According to Microsoft, this value
should not exceed 0.5 - 1.0% of connected users. If the
queue length is high or rising, it may indicate that you
have a problem with one of your Exchange components
or with a remote Exchange MTA.

Collector: MTAColl

PATROL Parameter Reference Manual 567

PATROL Parameter Reference Manual 568

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 54 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
WorkQueueSize Y con 0–2147483647 undef undef set by coll graph KB
alarm
Displays the total volume of messages currently stored in
the MTA. PATROL for Exchange Server provides a built-
in report for this parameter.

Collector: MTAColl
MSEXCH_MTA_Connections Application Class
MTAConnectionsColl Y std NA NA NA 60 sec text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the
MTAConnections consumer parameters. When such
errors occur, the text description of the problem is set as
the parameter value and the parameter goes into an
ALARM or WARNING state.
OldestMessage N con 0–2147483647 86400–max max set by coll graph sec
alarm warn alarm
Displays the longest time that any currently queued
message has been in the MTA connection queue.

Note: In Microsoft Exchange Server 5.5 SP1 and SP2, the

Windows NT Performance counter that supplies the data
for this parameter is unreliable. See the Microsoft
Exchange Server documentation for more information.

Collector: MTAConnectionsColl
QueueGrowth Y std 0–2147483647 10–max undef 60 sec graph number of
alarm alarm unprocessed
Gives an indication of the number of unprocessed messages per minute
messages in the queue per minute.
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 55 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
QueueLength Y con 0–2147483647 10–30 31–max set by coll graph messages
alarm warn alarm
Displays the number of outstanding messages queued for
transfer to this MTA connection. If QueueLength is large
or increasing, the receiving MTA may be failing. Note: In
Microsoft Exchange Server 5.5 SP1 and SP2, the Windows
NT Performance counter that supplies the data for this
parameter is unreliable.

Collector: MTAConnectionsColl
RecvBytesPerSec Y con 0–2147483647 undef undef set by coll graph bytes per sec
alarm
Displays the rate that bytes are received from this MTA
connection.

Collector: MTAConnectionsColl
SendBytesPerSec Y con 0–2147483647 undef undef set by coll graph bytes per sec
alarm
Displays the rate that bytes are sent to this MTA
connection.

Collector: MTAConnectionsColl
MSEXCH_MTA_PC Application Class
ContentionsPerHour Y con 0–2147483647 undef undef set by coll graph contentions per hr
alarm
Displays the rate that file operations are failing due to
contention.

Collector: MTAPCColl

PATROL Parameter Reference Manual 569

PATROL Parameter Reference Manual 570

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 56 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MTAPCColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the MTAPC
consumer parameters. When such errors occur, the text
description of the problem is set as the parameter value
and the parameter goes into an ALARM or WARNING
state.
RecvMsgsPerHour Y con 0–2147483647 undef undef set by coll graph messages per hr
alarm
Displays the rate that the Exchange Server receives
messages from a MS Mail Connector.

Collector: MTAPCColl
SentMsgsPerHour Y con 0–2147483647 undef undef set by coll graph messages per hr
alarm
Displays the rate that messages are sent from the
Exchange Server to the MS Mail Connector.

Collector: MTAPCColl
MSEXCH_Network Application Class
BytesTotalPerSec Y con 0–2147483647 0 undef set by coll graph bytes
alarm alarm
Displays the total bytes per second sent and received by
the Redirector.

Collector: MSEXCHNetworkColl
MSEXCHNetworkColl Y std NA NA NA 150 sec text none

Gathers data for the parameters in the

MSEXCH_Network application class.
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 57 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NetworkErrorsPerSec Y con 0–2147483647 undef undef set by coll graph number of errors
alarm
Count of network errors encountered by the Redirector.

Collector: MSEXCHNetworkColl
MSEXCH_NSPI_Proxy Application Class
ByteXmitRate Y con 0–2147483647 undef undef set by coll graph bytes per sec
alarm
Displays the rate that the Name Service Provider
Interface (NSPI) Proxy transmits bytes to the domain
controller and to Outlook clients.

Collector: NSPIColl
ClientConnects Y con 0–2147483647 undef undef set by coll graph connections
alarm
Displays the number of Outlook clients connected to the
Name Server Provider Interface (NSPI) Proxy service.

Collector: NSPIColl
FailedReads Y con 0–2147483647 undef undef set by coll graph reads
alarm
Displays the number of times that the Name Service
Provider Interface (NSPI) Proxy service failed to read
from a domain controller or an Outlook client.

Collector: NSPIColl
FailedWrites Y con 0–2147483647 undef undef set by coll graph writes
alarm
Displays the number of times that the Name Service
Provider Interface (NSPI) Proxy service failed to write to
a domain controller or an Outlook client.

Collector: NSPIColl

PATROL Parameter Reference Manual 571

PATROL Parameter Reference Manual 572

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 58 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NSPIColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the NSI Proxy consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
MSEXCH_Oledb_Events Application Class
Completed Y con 0–2147483647 undef undef set by coll graph events
alarm
Displays the number of OLE/DB events completed
during the last collection cycle.

Collector: OledbEventColl
CompletionRate Y con 0–2147483647 undef undef set by coll graph events per sec
alarm
Displays the rate that OLE/DB events are completed.

Collector: OledbEventColl
OledbEventColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the OLE/DB Event consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
SubmitRate Y con 0–2147483647 undef undef set by coll graph events per sec
alarm
Displays the rate that OLE/DB events are submitted.

Collector: OledbEventColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 59 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Submitted Y con 0–2147483647 undef undef set by coll graph events
alarm
Displays the number of OLE/DB events submitted.

Collector: OledbEventColl
MSEXCH_Oledb_Resources Application Class
AbortPct Y con 0–100 85–95 96–100 set by coll gauge percentage of
alarm warn alarm transactions
Displays the percentage of information store transactions
that abort.

Collector: OledbColl
AbortRate Y con 0–2147483647 undef undef set by coll graph transactions per sec
alarm
Displays the rate that information store transactions are
aborted.

Collector: OledbColl
CommitRate Y con 0–2147483647 undef undef set by coll graph transactions per sec
alarm
Displays the rate that OLE/DB transactions were
committed during the last collection cycle.

Collector: OledbColl
OledbColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the OLE/DB Resources consumer
parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.

PATROL Parameter Reference Manual 573

PATROL Parameter Reference Manual 574

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 60 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
StartRate Y con 0–2147483647 undef undef set by coll graph transactions per sec
alarm
Displays the rate that OLE/DB transactions are started.

Collector: OledbColl
MSEXCH_Performance Application Class
ClientConnections Y con 0–2147483647 1–100 100 set by coll graph connects
alarm warn alarm
Displays the number of clients connected to the Exchange (inactive by (inactive by
Server. PATROL for Exchange Server provides a built-in default) default)
report for this parameter

Collector: PerformanceColl
ClientLicenseCount N con 0–100 0 1–2 set by coll graph licenses
alarm alarm warn
Displays the number of client licenses available. If you are
using per seat licensing, this parameter is inactive.

Collector: PerformanceColl
DbLogFiles N con 0–2147483647 100–max max set by coll graph files
alarm alarm alarm
Displays the number of database transaction log files.
This parameter contains a recovery action (inactive by
default) that purges or backs up the information store
database logs when the DbLogFiles parameter enters an
alarm state

Collector: PerformanceColl
DBLogSize N con 0–10000 90–110 110 set by coll graph megabytes
alarm warn alarm
Displays the total size of the database transaction log files
for all of the storage groups on the server.

Collector: PerformanceColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 61 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
EvtLogInfoCount N con 0–100 0–100 100 set by coll graph number of events
OK OK OK
Displays the number of Exchange information events
logged during the collection cycle. This parameter is
active only if the Event Log Monitoring option is enabled
for your configuration.

Collector: PerformanceColl
InactiveConnections Y con 0–2147483647 1–100 100 set by coll graph connects
alarm warn alarm
Displays the number of clients connected to the Exchange (inactive by (inactive by
Server that have had no activity in the last 10 minutes. default) default)
PATROL for Exchange Server provides a built-in report
for this parameter

Collector: PerformanceColl
MaxFolderMsgs N con 0–2147483647 1–100 100 set by coll graph messages
alarm warn alarm
Displays the largest number of messages in any folder
(public or private).

Collector: PerformanceColl
PerformanceColl Y std NA NA NA 10 min text none

Gathers server performance-related parameters for a

discovered Exchange Server.
PrivateFolders N con 0–2147483647 1–100 100 set by coll graph folders
alarm warn alarm
Displays the total number of user mailboxes on the
Exchange Server. PATROL for Exchange Server provides
a built-in report for this parameter

Collector: PerformanceColl

PATROL Parameter Reference Manual 575

PATROL Parameter Reference Manual 576

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 62 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PublicFolders N con 0–2147483647 1–100 100 set by coll graph folders
alarm warn alarm
Displays the total number of public folders on the
Exchange Server. PATROL for Exchange Server provides
a built-in report for this parameter.

Collector: PerformanceColl
ServerCpuPctPriv N con 0–100 85–95 96–100 set by coll gauge percentage
alarm warn alarm
Displays the percentage of processor time spent in
privileged mode in non-idle threads. Device drivers for
most devices except graphics adapters and printers
execute in privileged mode, as well as the Windows NT
service layer, the executive routines, and the Windows
NT kernel. This parameter is active only if the Process
Monitoring option is enabled for your configuration.

Collector: PerformanceColl
ServerCpuPctUser N con 0–100 85–95 96–100 set by coll gauge percentage
alarm warn alarm
Displays the percentage of CPU time currently being
spent in user mode doing commands and tasks initiated
by users. This parameter is active only if PATROL KM for
Windows NT is loaded.

Collector: PerformanceColl
ServerMessages N con 0–2147483647 1–100 100 set by coll graph messages
alarm warn alarm
Displays the total number of messages in the information
store (public and private). PATROL for Exchange Server
provides a built-in report for this parameter

Collector: PerformanceColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 63 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ServerMsgSize N con 0–2147483647 1–100 100 set by coll graph megabytes
alarm warn alarm
Displays the space used by all of the messages in the
information store (public and private). PATROL for
Exchange Server provides a built-in report for this
parameter

Collector: PerformanceColl
TrackLogFiles N con 0–2147483647 100–max max set by coll graph files
alarm alarm alarm
Displays the message tracking log files. PATROL for
Exchange Server provides a built-in report for this
parameter.This parameter has a built-in recovery action
(inactive by default) that purges the message tracking
database log files when the TrackLogFiles parameter to
go into an alarm state.

Collector: PerformanceColl
TrackLogSize N con 0–10000 90–110 110 set by coll graph megabytes
alarm warn alarm
Displays the total size of all message tracking log files.
This parameter has the following default recovery
actions: alarm 1–-displays a system output window that
states that the log file size has exceeded threshold.

alarm 2–-none

PATROL for Exchange Server provides a built-in report

for this parameter.

Collector: PerformanceColl

PATROL Parameter Reference Manual 577

PATROL Parameter Reference Manual 578

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 64 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_POP3_Server Application Class
AuthFailures Y con 0–2147483647 undef undef set by coll graph commands
alarm
Displays the number of failed authentication attempts
using a POP3 connection.

An unusually high number of authentication failures

could indicate that someone is attempting unauthorized
access to the server.

Collector: POP3Coll
Connections Y con 0–2147483647 undef undef set by coll graph connections
alarm
Displays the number of POP3 client connections.

Collector: POP3Coll
FailedConnects Y con 0–2147483647 undef undef set by coll graph connections
alarm
Displays the number of POP3 client connections that
failed.

Collector: POP3Coll
PassFailures Y con 0–2147483647 undef undef set by coll graph commands
alarm
Displays the number of pass commands that failed.

Collector: POP3Coll
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 65 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
POP3Coll Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the POP3 Server consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
MSEXCH_Queue_Protocols Application Class
TotalMessagesInAllQueues Y std 0–2147483647 1000–max undef 5 min graph messages
OK alarm
Calculates the total number of messages in all the queues
for all SMTP virtual server instances; checks to see if the
number of messages is consistently greater than 1000. To
be consistently greater than 1000, the count must be high
for a period of 30 minutes or longer. Initiates a recovery
action to increase the SMTP file handles in the registry so
that a larger queue can be processed more quickly.
MSEXCH_Queues Application Class
IncreasingTime Y con 0–2147483647 25–30 30–max set by coll graph minutes
OK OK OK
Displays the amount of time that the message queue for
the protocol has been increasing in length.

Collector: QueuesColl
Messages Y con 0–2147483647 10–max undef set by coll graph messages
OK OK
Displays the number of messages in the protocol message
queue.

Collector: QueuesColl

PATROL Parameter Reference Manual 579

PATROL Parameter Reference Manual 580

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 66 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MsgSize Y con undef undef undef set by coll graph bytes

Displays the size of the protocol message queue.

Collector: QueuesColl
OldestMsgAge Y con 0–2147483647 12–max undef set by coll graph sec
warn alarm
Indicates the greatest length of time that any currently
queued message has been in the MTA connection queue.
This value varies widely with server workload and
message size. Large messages often reside in the queue
for a long time before being sent.

Collector: QueuesColl
QueueGrowth Y std 0–2147483647 10–max max 60 sec graph number of
warn alarm alarm unprocessed
Displays the number of unprocessed messages in the (inactive by messages per minute
queue per minute. default)
QueuesColl Y std NA NA NA 60 sec text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Queues consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
State Y con undef undef undef set by coll graph 0 = active
1 = ready
Displays the status of the link queue 2 = retry
3 = scheduled
Collector: QueuesColl 4 = remote
5 = frozen
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 67 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Type Y con undef undef undef set by coll graph 0=Remote Delivery
1=Local Delivery
Displays the type of link queue. 2=Pending Routing
3=Pending
Collector: QueuesColl Categorization
4=Unreachable
5=Deferred Delivery
6=Internal
MSEXCH_Roundtrip_Client Application Class
ClientE2EProblemDetector Y std undef undef undef 2.5 min NA none

Detects and reports when network problems are

preventing the client from updating status information.
CreateMsgTime Y con undef undef undef set by coll graph sec

Displays the time required by the Exchange Server to

respond to the client's request to create a new message.

Collector: MSEXCHRountrip program

DeleteMsgTime Y con undef undef undef set by coll graph sec

Displays the time required by the server to respond to the

client's request to delete a message.

Collector: MSEXCHRountrip program

LastMsgTime Y con undef undef undef set by coll graph sec

Displays the time required by the last message to

complete a round trip between the client and the host
server.

Collector: MSEXCHRountrip program

PATROL Parameter Reference Manual 581

PATROL Parameter Reference Manual 582

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 68 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LastNMsgTime Y con undef undef undef set by coll graph sec

Displays the average time required by the message to

complete a round trip between the client and the host
server for the last N messages.

Collector: MSEXCHRountrip program

LogoffTime Y con undef undef undef set by coll graph sec

Displays the time required by the client to log off of the

Exchange Server.

Collector: MSEXCHRountrip program

LogonTime Y con undef undef undef set by coll graph sec

Displays the time required by the client to log on to the

Exchange Server.

Collector: MSEXCHRountrip program

MaxMsgTime Y con undef undef undef set by coll graph sec

Displays the maximum time required by a message to

complete the round trip between the client and the host
server. The maximum time resets when the agent shuts
down.

Collector: MSEXCHRountrip program

OpenMsgTime Y con undef undef undef set by coll graph sec

Displays the time required by the Exchange Server to

respond to the client's request to open a message. If
OpenMsgTime is high or increasing, you may be
experiencing network problems.

Collector: MSEXCHRountrip program

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 69 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
RoundtripStatus Y con undef undef undef

Reports the status of the roundtrip client component and

any application specific error.

Collector: MSEXCHRountrip program

SendMsgTime Y con undef undef undef set by coll graph sec

Displays the time required by the server system attendant

to receive a message sent by a client. If SendMsgTime is
high or increasing, you may be experiencing network
problems.

Collector: MSEXCHRountrip program

Status Y con 0–2 1–1 2–2 set by coll graph 0 = OK
OK warn alarm 1 = warn
Displays the status of the last message sent to the client. 2 = alarm

Collector: MSEXCHRountrip program

MSEXCH_Roundtrip_Container Application Class
Status Y con undef undef undef set by coll text none

Provides the status of the End to End program on the

Exchange Server.

Collector: MSEXCHRountrip program

MSEXCH_Roundtrip_InetServer Application Class
LastMsgTime Y con undef undef undef set by coll graph sec

the time required for the last message to complete a

round-trip between this Exchange Server and the foreign
mail server

Collector: internal executable that uses the SMTP

protocol

PATROL Parameter Reference Manual 583

PATROL Parameter Reference Manual 584

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 70 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LastNMsgTime Y con undef undef undef set by coll graph sec

the average time required for the last N messages to

complete a round-trip between this Exchange Server and
the foreign mail server

The default N value is 10.

Collector: internal executable that uses the SMTP

protocol
MaxMsgTime Y con undef undef undef set by coll graph sec

the maximum time required for a message to complete a

round-trip between this Exchange Server and the foreign
mail server since the PATROL Agent was started

Collector: internal executable that uses the SMTP

protocol
Status Y con 0–2 1–1 2–2 set by coll graph 0=OK
OK warn alarm 1=Warn
the status of the last message sent to the foreign mail 2=Alarm
server

Collector: internal executable that uses the SMTP

protocol
MSEXCH_Roundtrip_Server Application Class
LastMsgTime Y con undef undef undef set by coll graph sec

Displays the time required for the last message to

complete a round-trip between this server and the remote
server.

Collector: MSEXCHRountrip program

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 71 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LastNMsgTime Y con undef undef undef set by coll graph sec

Displays the average time required for the last N

messages to complete a round-trip between this server
and the remote server. The default N value is 10. To
change the N value for all current and future response-
time sessions, select the menu command Configure Last
N Messages from the MSEXCH_EndToEnd application.

Collector: MSEXCHRountrip program

MaxMsgTime Y con undef undef undef set by coll graph sec

Displays the maximum time required for a message to

complete a round-trip between this server and the remote
server since the agent was started.

Collector: MSEXCHRountrip program

Status Y con 0–2 1–1 2–2 set by coll graph 0 = OK
OK warn alarm 1 = warn
Displays the status of the last message sent to the remote 2 = alarm
server.

Collector: MSEXCHRountrip program

MSEXCH_Sent_Mail Application Class
PercentOfTotalRecv Y con 0–2147483647 undef undef set by coll graph percentage
OK
Displays the percentage of total mail traffic which
represents mail received from this remote server.

Collector: MSEXCHSentMailColl

PATROL Parameter Reference Manual 585

PATROL Parameter Reference Manual 586

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 72 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PercentOfTotalSent Y con 0–2147483647 undef undef set by coll graph percentage
alarm
Displays the percentage of total mail traffic which
represents mail sent to this remote server.

Collector: MSEXCHSentMailColl
RecvBytes Y con 0–2147483647 undef undef set by coll graph KB
OK
Displays the total number of bytes received by this server
from the remote server in the last polling cycle. RecvBytes
measures message traffic between specific servers in your
site. By monitoring the traffic patterns between servers,
you can detect bottlenecks and spot potential problems. If
message tracking is disabled, RecvBytes is not available.
PATROL obtains the data for this parameter from the
Exchange Server tracking log.

Collector: MSEXCHSentMailColl
RecvMsgs Y con 0–2147483647 undef undef set by coll graph messages
OK
Displays the total number of messages received by this
server from the remote server in the last polling cycle.
RecvMsgs is a measure of message traffic between
specific servers in your site. By monitoring the traffic
patterns between servers, you can detect bottlenecks and
spot potential problems. If message tracking is disabled,
RecvMsgs is not available. PATROL obtains the data for
this parameter from the Exchange Server tracking log.

Collector: MSEXCHSentMailColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 73 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SentBytes Y con 0–2147483647 undef undef set by coll graph KB
OK
Displays the total number of bytes sent to the remote
server in the last polling cycle. SentBytes is a measure of
message traffic between specific servers in your site. By
monitoring the traffic patterns between servers, you can
detect bottlenecks and spot potential problems. If
message tracking is disabled, SentBytes is not available.
PATROL obtains the data for this parameter from the
Exchange Server tracking log.

Collector: MSEXCHSentMailColl
SentMsgs Y con 0–2147483647 undef undef set by coll graph messages
OK
Displays the number of messages sent to the remote
server in the last polling cycle. SentMsgs is a measure of
message traffic between specific servers in your site. By
monitoring the traffic patterns between servers, you can
detect bottlenecks and spot potential problems. If
message tracking is disabled, SentMsgs is not available.
PATROL obtains the data for this parameter from the
Exchange Server tracking log.

Collector: MSEXCHSentMailColl
MSEXCH_Sent_Mail_Containers Application Class
MSEXCHSentMailColl Y coll NA NA NA 5 min text none

Collects data for the MSEXCH_Sent_Mail_Container,

MSEXCH_Sent_Mail, and MSEXCH_MonitoredServers
application classes.

PATROL Parameter Reference Manual 587

PATROL Parameter Reference Manual 588

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 74 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PercentOfTotalRecv Y con 0–2147483647 undef undef set by coll graph percentage
alarm
Displays the percentage of total mail traffic which
represents mail received by the local server.

Collector: MSEXCHSentMailColl
PercentOfTotalSent Y con 0–2147483647 undef undef set by coll graph percentage
alarm
Displays the percentage of total mail traffic which
represents mail sent by the local server.

Collector: MSEXCHSentMailColl
TotalBytesReceived Y con undef undef undef set by coll graph kilobytes

Displays the total number of bytes received from all

remote Exchange Servers in the site during the last
polling cycle. If message tracking is disabled,
MTABytesReceived is not available. PATROL obtains the
data for this parameter from the Exchange Server
tracking log.

Collector: MSEXCHSentMailColl
TotalBytesSent Y con undef undef undef set by coll graph kilobytes

Displays the total number of bytes that have been sent to

all remote Exchange Servers in the site during the last
polling cycle. If message tracking is disabled,
MTABytesSent is not available. PATROL obtains the data
for this parameter from the Exchange Server tracking log.

Collector: MSEXCHSentMailColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 75 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TotalMsgReceived Y con undef undef undef set by coll graph messages

Displays the total number of messages that have been

received from all remote Exchange Servers in the site
during the last polling cycle. If message tracking is
disabled, MTAMsgReceived is not available. PATROL
obtains the data for this parameter from the Exchange
Server tracking log.

Collector: MSEXCHSentMailColl
TotalMsgSent Y con undef undef undef set by coll graph messages

Displays the total number of messages that have been

sent to all remote Exchange Servers in the site during the
last polling cycle. If message tracking is disabled,
MTAMsgSent is not available. PATROL obtains the data
for this parameter from the Exchange Server tracking log.

Collector: MSEXCHSentMailColl
MSEXCH_Server Application Class
CheckConfiguration Y std 0–1 0 undef 10 min Boolean 0=Error
alarm alarm 1=OK
Indicates whether PATROL for Exchange Server has been
configured. If this parameter is an alarm state, you must
configure PATROL for Exchange Server with a valid
Exchange Server administrative account.
ServerColl N std NA NA NA 10 min text none

Gathers data for all of the server-related parameters for a

discovered Exchange Server.
SystemRestartTrigger N std undef undef undef 86399 sec text none

Restarts all of the Exchange Server Windows NT services.

By default, this parameter is inactive.

PATROL Parameter Reference Manual 589

PATROL Parameter Reference Manual 590

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 76 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_Server_Health_Container Application Class
ActiveConnections Y con 0–2147483647 undef undef set by coll graph connects
alarm
Displays the number of clients connected to the Exchange
Server that have had no activity in the last 10 minutes.
PATROL for Exchange Server provides a built-in report
for this parameter.

Collector: ServerHealthColl
ClientLicensePctMax N con 0–100 95–99 100 set by coll gauge percentage
alarm warn alarm
Displays the percentage of total client licenses currently
in use. If you are using per seat licensing, this parameter
is inactive.

Collector: ServerHealthColl
DiskStatusRpt N std 0–100 0–100 100 10 min text none
OK OK OK
Describes the current status of all Exchange disk drives.
EventStatusColl Y std NA NA NA 60 sec none none

Gathers information on Exchange-related events and

generates expert advice.
EvtLogErrorCount N con 0–100 0–100 100 set by coll graph number of events
OK OK OK
Displays the number of Exchange error events logged
during the collection cycle. This parameter is active only
if the application class NT_EVENTLOG in the Windows
NT OS or Windows 2000 OS KM is loaded.

Collector: ServerHealthColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 77 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
EvtLogWarningCount N con 0–100 0–100 100 set by coll graph number of events
OK OK OK
Displays the number of Exchange warning events logged
during the collection cycle. This parameter is active only
if the application class NT_EVENTLOG in the Windows
NT OS or Windows 2000 OS KM is loaded.

Collector: ServerHealthColl
MailFlowStatusRpt N std 0–100 0–100 100 10 min text none
OK OK OK
Describes information pertaining to mail flow rates, as
well as the current status of existing server Roundtrip
and internet Roundtrip sessions.
NonDeliveryRpts N std 0–100 0–100 100 2 hr graph non-delivery reports
OK OK OK
Displays the number of non-delivery reports (NDRs) that
have occurred at the virtual server during the last
collection cycle
QueueStatusRpt N std 0–100 0–100 100 10 min text none
OK OK OK
Describes the status of all queues by virtual servers;
alarms if any queue has a problem.
ServerCpuPct N con 0–100 85–95 96–100 set by coll gauge percentage
alarm warn alarm
Displays the percentage of total CPU used by Exchange
Server processes. This parameter is active only if
PATROL KM for Windows NT is loaded. PATROL for
Exchange Server provides a built-in report for this
parameter.

Collector: ServerHealthColl
ServerHealthColl Y std NA NA NA 10 min text none

Gathers data for all of the server health-related

parameters for a discovered Exchange Server.

PATROL Parameter Reference Manual 591

PATROL Parameter Reference Manual 592

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 78 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ServerMemory N con 0–100 1–100 100 set by coll graph megabytes
alarm warn alarm
Displays the amount of memory used by Exchange Server
processes. This parameter is active only if PATROL KM
for Windows NT is loaded.

Tip: To improve memory use, try the following: increase

the size of your pagefile or move the pagefile to a
separate physical disk; move Exchange components to a
different server; add RAM; restrict client mail usage.

Collector: ServerColl
ServerStatus Y con 0–2 1 2 set by coll stop 0=OK
alarm warn alarm light 1=Service Down
Indicates whether Exchange Server services have been 2=Connect Failed
started and whether clients can make connections.
PATROL for Exchange Server provides a built-in report
for this parameter.

By default, this parameter has a recovery action that

restarts Exchange Server services that go down. You can
also configure the recovery action to run a database
integrity check before restarting the MTA and repair the
MTA if it is corrupt.

Collector: ServerColl
MSEXCH_SMTP_Server Application Class
AvgRetriesIncomingMsgDelivery Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays how many messages are going into retry as a
fraction of the overall messages delivered.

Collector: SMTPColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 79 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AvgRetriesOutgoingMsgDelivery Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays how many messages are going into retry as a
fraction of the overall messages delivered.

Collector: SMTPColl
CategorizerQueueLength Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages waiting for advanced
address resolution.

Collector: SMTPColl
CurrentInboundConnections Y con 0–2147483647 undef undef set by coll graph number of
alarm connections
Displays the total number of connections currently
inbound.

Collector: SMTPColl
LocalQueueLength Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages in the local queue; this
queue contains messages that are queued for local
delivery on the server running Exchange to an Exchange
mailbox.

Collector: SMTPColl
MsgBytesRcvPerSec Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the rate at which bytes are received by this
SMTP server instance.

Collector: SMTPColl

PATROL Parameter Reference Manual 593

PATROL Parameter Reference Manual 594

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 80 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MsgBytesSentPerSec Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the rate at which bytes are sent by this SMTP
server instance.

Collector: SMTPColl
SMTPColl Y std NA NA NA 60 sec text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the SMTP Server consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
MSEXCH_Storage_Group Application Class
DbLogFiles Y con 0–2147483647 100–max undef set by coll graph files
alarm alarm
Displays the total number of database transaction log files
for all of the storage groups on the server.This parameter
contains a recovery action (inactive by default) that
purges or backs up the information store database logs
when the DbLogFiles parameter enters an alarm state.

Collector: StorageGroupColl
DbLogSize Y con undef undef undef set by coll graph MB

Displays the total size of the database transaction log files

for all of the storage groups on the server.

Collector: StorageGroupColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 81 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
StorageGroupColl Y coll NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Storage Group consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
MSEXCH_Storage_Group_Container Application Class
StorageGroupsColl Y std NA NA NA 10 min text none

Collects data about the database and Information Store

application classes.
MSEXCH_Store_Driver Application Class
LocalRetries Y con 0–2147483647 undef undef set by coll graph retries
alarm
Displays the number of times a message intended for the
local server was resent in the last collection cycle.

Collector: StoreDriverColl
MsgPctLocal Y con 0–100 undef undef set by coll gauge percentage of
alarm messages
Displays the percentage of messages submitted to the
information store driver that are delivered to the local
server.

Collector: StoreDriverColl
MsgSubmitRate Y con 0–2147483647 undef undef set by coll graph submits per sec
alarm
Displays the rate that messages are submitted to the Store
Driver.

Collector: StoreDriverColl

PATROL Parameter Reference Manual 595

PATROL Parameter Reference Manual 596

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 82 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
RcpPctLocal Y con 0–100 undef undef set by coll gauge percentage of
alarm recipients
Displays the percentage of recipients that are local.

Collector: StoreDriverColl
ReadBlocks Y con 0–2147483647 undef undef set by coll graph blocks
alarm
Displays the number of read blocks performed by the
information store driver during the collection cycle.

This value correlates to user load on the information

store.

Collector: StoreDriverColl
StoreDriverColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Store Driver consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
SubmitListItems Y con 0–2147483647 undef undef set by coll graph number of items
alarm
Displays the number of items in the Store Driver submit
list.

Collector: StoreDriverColl
WriteBlocks Y con 0–2147483647 undef undef set by coll graph blocks
alarm
Displays the number of write blocks performed by the
information store driver during the collection cycle.

Collector: StoreDriverColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 83 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
WriteConflicts Y con 0–2147483647 undef undef set by coll graph blocks
alarm
Displays the number of times that the store driver
experienced a conflict when writing data to the disk.

Collector: StoreDriverColl
MSEXCH_Top_Folders Application Class
MsgCount Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages in the folder.

Collector: TopFoldersColl
MsgSize Y con 0–2147483647 undef undef set by coll graph KB
alarm
Displays the total size of all messages in the folder. This
parameter has the following default recovery actions:

alarm 1–-displays a system output window noting that

the public folder size exceeds the threshold.

alarm 2–-none

Collector: TopFoldersColl
TopFoldersColl Y std NA NA NA 10 min text none

Gathers message statistics for the top public folders based

on message count or message size.
MSEXCH_Top_Mailboxes Application Class
MsgCount Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages in the mailbox.

Collector: TopMailboxesColl

PATROL Parameter Reference Manual 597

PATROL Parameter Reference Manual 598

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 84 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MsgSize Y con 0–2147483647 undef undef set by coll graph KB
OK
Displays the total size of all messages in the mailbox. This
parameter has the following default recovery actions:

alarm 1–-sends an email to the user once per day that

states mail usage exceeds desired amount

alarm 2–-noneTop

Collector: TopMailboxesColl
TopMailboxesColl Y std NA NA NA 10 min text none

Collects parameter data for the Top Mailboxes

application class.
MSEXCH_Top_Receivers Application Class
AvgMsgsPerHour Y con 0–2147483647 undef undef set by coll graph messages per hr
alarm
Displays the average number of messages received per
hour.

Collector: TopReceiversColl
MsgCount Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages received in the last
polling cycle. The default polling cycle is 24 hours.

Collector: TopReceiversColl
MsgSize Y con 0–2147483647 undef undef set by coll graph KB
alarm
Displays the total size of the messages received in the last
polling cycle.The default polling cycle is 24 hours.

Collector: TopReceiversColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 85 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TopReceiversColl Y std NA NA NA 10 min text none

Displays the collector parameter that collects parameter

data for the Top Receivers application class.
MSEXCH_Top_Senders Application Class
AvgMsgsPerHour Y con 0–2147483647 undef undef set by coll graph messages per hr
alarm
Displays the average number of messages sent per hour.

Collector: TopSendersColl
MsgCount Y con 0–2147483647 undef undef set by coll graph messages
alarm
Displays the number of messages sent in the last polling
cycle. The default polling cycle is 24 hours.

Collector: TopSendersColl
MsgSize Y con 0–2147483647 undef undef set by coll graph KB
alarm
Displays the total size of the messages sent in the last
polling cycle. The default polling cycle is 24 hours.

Collector: TopSendersColl
TopSendersColl Y std NA NA NA 10 min text none

Collects parameter data for the Top Senders application

class.
MSEXCH_VideoConf_Server Application Class
Conferences Y con 0–2147483647 undef undef set by coll graph conferences
alarm
Displays the number of video conferences in progress.

Collector: VideoConfColl

PATROL Parameter Reference Manual 599

PATROL Parameter Reference Manual 600

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 86 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FailedJoinPct Y con 0–100 75–90 91–100 set by coll gauge percentage of users
alarm warn alarm
Displays the percentage of users who tried to join a video
conference and failed.

Collector: VideoConfColl
FailedUserJoins Y con 0–2147483647 undef undef set by coll graph attempts
alarm
Displays the number of times in the last collection cycle
that a user tried to join a video conference and failed.

Collector: VideoConfColl
VideoConfColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Video Conference consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
MSEXCH_Virtual_Server_Health Application Class
ClientConnectState Y con 0–1 1 1 set by coll graph 0=OK
alarm alarm alarm 1=Client Connect
Indicates whether clients can connect to the virtual (inactive by Failed
server. default)
ClusterState Y std 0–5 0 4–5 60 sec graph 0=Offline
alarm warn alarm 1=Pending
Displays the status of the Exchange cluster group that this 2=Partial Online
node belongs to. 3=Online
4=Failed
5=Unknown
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 87 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DiskStatusRpt Y std undef undef undef 10 min text none

Describes information pertaining to disk utilization. Lists

Exchange components on each drive.
MailFlowStatusRpt Y std undef undef undef 10 min text none

Describes information pertaining to mail flow rates, as

well as the current status of existing server Roundtrip
and internet Roundtrip sessions.
NonDeliveryRpts Y std undef undef undef 2 hr graph non-delivery reports

Displays the number of non-delivery reports (NDRs) that

have occurred during the collection cycle.
QueueStatusRpt Y std undef undef undef 10 min text none

Describes information pertaining to Exchange queue

status.
VirtualServerHealthColl Y std NA NA NA 10 min text none

Gathers data for all of the virtual server-related

parameters for a discovered Exchange virtual server.
MSEXCH_Watched_Users Application Class
AssocContentCount Y con undef undef undef set by coll graph items

Displays the number of items in the associated contents

table of the mailbox.

Associated contents include items such as notes and

contacts.

Collector: WatchedUserColl

PATROL Parameter Reference Manual 601

PATROL Parameter Reference Manual 602

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 88 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AttachmentSize Y con undef undef undef set by coll graph MB

Displays the total size of the attachments in the user's

mailbox.

Collector: WatchedUserColl
InetMsgRecvRate Y con undef undef undef set by coll graph messages per hr

Displays the number of internet mail messages received

by the user.

Collector: WatchedUserColl
InetMsgSendRate Y con undef undef undef set by coll graph messages per hr

Displays the number of internet mail messages sent by

the user.

Collector: WatchedUserColl
MsgCount Y con undef undef undef set by coll graph messages

Displays the number of messages in the user's mailbox.

Collector: WatchedUserColl
MsgRecvRate Y con undef undef undef set by coll graph messages per hr

Displays the total number of messages received by the

user in the last collection cycle.

Collector: WatchedUserColl
MsgSendRate Y con undef undef undef set by coll graph messages per hr

Displays the number of messages per hour that the user is

sending.

Collector: WatchedUserColl
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 89 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MsgSize Y con undef undef undef set by coll graph bytes

Displays the total size of the messages in the user's

mailbox.

Collector: WatchedUserColl
QuotaLimit Y con undef 2–2 3–3 set by coll stop 0=No Quota
warn alarm light 1=Quota OK
Specifies if the watched user is over his or her assigned 2=Quota Warning
mail quotas. 3=Prohibit Sent

Collector: WatchedUserColl
SuspectMsgCount Y con 0–2147483647 1–100 undef set by coll graph messages
alarm alarm
the number of messages that are delivered to a mailbox
that PATROL uses to catch potential viruses

This parameter contains a recovery action (inactive by

default) that automatically shuts down the MTA when a
message is delivered to the bogus mailbox.

Collector: WatchedUserColl
MSEXCH_Watched_Users_Container Application Class
WatchedUsersColl Y coll NA NA NA 120 sec text none

contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Watched User consumer parameters

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.

PATROL Parameter Reference Manual 603

PATROL Parameter Reference Manual 604

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 90 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCH_Web_Connector Application Class
AttachmentBytes Y con 0–2147483647 undef undef set by coll graph bytes
alarm
Displays the total number of bytes of mail attachments
that were processed by the Web Connector in the last
polling cycle.

Collector: WebConnectorColl
Attachments Y con 0–2147483647 undef undef set by coll graph attachments
alarm
Displays the total number of mail attachments that were
processed by the Web Connector in the last polling cycle.

Collector: WebConnectorColl
MessageBodies Y con 0–2147483647 undef undef set by coll graph message bodies
alarm
Displays the total number of mail messages that were
processed by the Web Connector in the last polling cycle.

Collector: WebConnectorColl
Objects Y con 0–2147483647 undef undef set by coll graph objects
alarm
Displays the number of mail messages, attachments, and
other mail related object that are currently being
processed by the Web Connector.

Collector: WebConnectorColl
WebConnectorColl Y std NA NA NA 10 min text none

Describes any errors that prevent the collector parameter

from obtaining PerfMon data and populating the
WebConnector consumer parameters. When such errors
occur, the text description of the problem is set as the
parameter value and the parameter goes into an ALARM
or WARNING state.
Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 91 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSEXCHWeb_Mail Application Class
ApptSendRate Y con 0–2147483647 undef undef set by coll graph appointments per sec
alarm
Displays the rate that clients set appointment via the
Web.

Collector: WebMailColl
AuthCacheHitRate Y con 0–2147483647 undef undef set by coll graph hits per sec
alarm
Displays the rate that the Exchange 2000 Server Web Mail
service authenticates clients from cache.

Collector: WebMailColl
AuthRate Y con 0–100 undef undef set by coll graph authentications per
alarm sec
Displays the rate that the Exchange 2000 Server Web Mail
service authenticates clients.

Collector: WebMailColl
FormSendRate Y con 0–2147483647 undef undef set by coll graph forms per sec
alarm
Displays the rate that clients send forms.

Collector: WebMailColl

PATROL Parameter Reference Manual 605

PATROL Parameter Reference Manual 606

Table 18 PATROL for Microsoft Exchange Servers 5.0.00 (Part 92 of 92)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MsgSendRate Y con 0–2147483647 0–100 100 set by coll graph messages per sec
alarm OK OK
Displays the rate that clients send messages via web mail. (inactive by (inactive by
default) default)
Collector: WebMailColl
WebMailColl Y std NA NA NA 10 min text none

Contains a description of any errors that prevent the

collector parameter from obtaining PerfMon data and
populating the Web Mail consumer parameters.

When such errors occur, the text description of the

problem is set as the parameter value and the parameter
goes into an ALARM or WARNING state.
PATROL for Microsoft SMS 2.1.01 for Microsoft SMS 1.2

Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 1 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSSMS_Events Application Class
EventAgeNew Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of min
alarm (inactive by 2147483647
Reports the amount of time since an event of the selected default) (inactive by
event type was reported in the SMS database. default)

Collector: SMSCollector
EventAgeOld Y con 0–2147483647 0–2147483647 2147483647– set by coll gauge number of days
alarm (inactive by 2147483647
Reports the age of the oldest event of the selected event default) (inactive by
type reported in the SMS database. default)

Collector: SMSCollector
EventComponent Y con NA NA NA set by coll text none

Provides a textual description of the event. The text

describes the newest event of this type.

Collector: SMSCollector
EventCount Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of events
alarm (inactive by 2147483647
Reports the number of events of the current type that default) (inactive by
have been reported in the SMS database. warn default)
alarm
Collector: SMSCollector

PATROL Parameter Reference Manual 607

PATROL Parameter Reference Manual 608

Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 2 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
EventOriginNew Y con NA NA NA set by coll text none

Reports the host machine where the newest event of the

selected type originated.

Collector: SMSCollector
EventSeverity Y con 0–3 1–1 2–2 set by coll graph none
alarm warn
Reports the severity of the event type.

Collector: SMSCollector
SMSCollector Y coll NA NA NA 300 text none
(5 min)
Gathers parameters for all of the unique events that are
stored in the SMS database.
MSSMS_Files Application Class
AverageFileAge Y con 0–2147483647 0–2147483647 0–2147483647 set by coll graph number of hr
alarm (inactive by (inactive by
Reports the average age of files in the directory matching default) default)
the file name pattern mask. warn alarm

Collector: SMSCollector
AverageFileSize Y con 0–2147483647 0–2147483647 0–2147483647 set by coll graph number of bytes
alarm (inactive by (inactive by
Reports the average size of files in the directory matching default) default)
the file name pattern mask. warn alarm

Collector: SMSCollector
FileAgeNew Y con 0–2147483647 0–2147483647 2147483647– set by coll gauge number of hr
alarm (inactive by 2147483647
Reports the amount of time since a file matching the file default) (inactive by
name pattern mask was added to the directory. warn default)
alarm
Collector: SMSCollector
Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 3 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FileAgeOld Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of hr
alarm (inactive by 2147483647
Reports the age of the oldest file in the directory matching default) (inactive by
the file name pattern mask. warn default)
alarm
Collector: SMSCollector
FileCount Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of files
alarm (inactive by 2147483647
Reports the number of files in the directory that match the default) (inactive by
file name pattern mask. warn default)
alarm
Collector: SMSCollector
TotalDiskPct Y con 0–100 40–60 60–100 set by coll graph percentage of total
warn alarm disk space used
Reports the percentage of total disk space used by files in
the directory matching the file name pattern mask.

Collector: SMSCollector
SMSCollector Y coll NA NA NA 300 text none
(5 min)
Gathers information about all default and user-selected
files in SMS directories.
MSSMS_Jobs Application Class
AvgPkgDistTime Y con 0–2147483647 0–2147483647 2147483647– set by coll gauge number of min
alarm (inactive by 2147483647
Reports the average time it has taken to distribute the default) (inactive by
software package to distribution servers. If this is a warn default)
Remove package from server job, then the value of this alarm
parameter is zero.

Collector: SMSCollector

PATROL Parameter Reference Manual 609

PATROL Parameter Reference Manual 610

Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 4 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CancelStatus Y con 0–6 5–5 6–6 set by coll graph none
alarm warn alarm
Reports the status of a cancelled job.

Collector: SMSCollector
ClientCompletePct Y con 0–100 25–50 50–100 set by coll graph percentage of clients
alarm warn alarm
Reports the percentage of client machines that are in a
Completed state.

Collector: SMSCollector
ClientCount Y con 0–2147483647 0–2147483647 2147483647– set by coll gauge number of clients
alarm (inactive by 2147483647
Reports the number of clients that are affected by the job. default) (inactive by
warn default)
Collector: SMSCollector alarm
ClientRetryPct Y con 0–100 0–100 100–100 set by coll graph number of clients
alarm (inactive by (inactive by
Reports the percentage of client machines that are in a default) default)
Retrying state. warn alarm

Collector: SMSCollector
JobRetryTime Y con 0–2147483647 0–2147483647 48–2147483647 set by coll graph number of min
alarm (inactive by (inactive by
Reports the time that the job has been in a retry state. default) default)
alarm alarm
Collector: SMSCollector
JobStatus Y con 1–7 5–5 6–6 set by coll graph none
alarm alarm warn
Provides the overall status of each SMS job.

Collector: SMSCollector
Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 5 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PackageID Y con NA NA NA set by coll text none

Reports the SMS package identifier for the software

package associated with each job.

Collector: SMS Collector

SendStatus Y con 0–6 5–5 6–6 set by coll graph none
alarm warn alarm
Informs you of the sending status of the job.

Collector: SMS Collector

ServerCompletePct Y con 0–100 0–100 100–100 set by coll graph percentage of servers
alarm (inactive by (inactive by
Reports the percentage complete for the package default) default)
distribution phase of the job. warn alarm

Collector: SMSCollector
ServerCount Y con 0–2147483647 0–2147483647 2147483647– set by coll gauge number of
alarm (inactive by 2147483647 distribution servers
Reports the number of distribution servers that are default) (inactive by
affected by the job. warn default)
alarm
Collector: SMSCollector
ServerFailedPct Y con 0–100 25–50 50–100 set by coll graph percentage of servers
alarm warn alarm in Failed state
Reports the percentage of distribution servers that are in a
Failed state.

Collector: SMSCollector
ServerRetryPct Y con 0–100 50–75 75–100 set by coll graph percentage of servers
alarm warn alarm in Retrying state
Reports the percentage of distribution servers that are in a
Retrying state.

Collector: SMSCollector

PATROL Parameter Reference Manual 611

PATROL Parameter Reference Manual 612

Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 6 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SMSCollector Y coll NA NA NA 300 text none
(5 min)
Gathers all of the job information for a discovered SMS
job.
SystemJob Y coll 0–1 0–1 1–1 300 bool none
alarm alarm alarm
Indicates that this particular job is a system job. (inactive by (inactive by
default) default)
Collector: SMSCollector
UserJob Y con 0–1 0–1 0–1 set by coll bool none
alarm (inactive by (inactive by
Indicates that this particular job is a user-defined job. default) default)
warn alarm
Collector: SMSCollector
WclName Y con NA NA NA set by coll text none

Correlates the command line command with the target

client workstation.

Collector: SMS Collector

WorkStatus Y con 1–6 5–5 6–6 set by coll graph none
alarm warn alarm
Indicates the job’s progress at all target sites.

Collector: SMSCollector
MSSMS_Primary_Servers Application Class
BadMifFiles Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of files
alarm (inactive by 2147483647
Reports the total number of MIF files that could not be default) (inactive by
processed by the SMS dataloader since the agent was warn default)
started. alarm

Collector: SMSCollector
Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 7 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CheckConfiguration Y std 0–1 0–0 1 to 1 300 sec bool none
alarm warn (inactive by (5 min)
Reports the status of SMS KM configuration. default)
alarm
EventAgedCount Y con 0–2147483647 1–2147483647 2147483647– set by coll gauge number of events
alarm (inactive by 2147483647
Reports the number of informational, warning, or error default) (inactive by
events in the SMS database that have a status of Aged. warn default)
alarm
Collector: SMSDailyCollector
EventErrorsNew Y con 0–2147483647 1–5 5–2147483647 set by coll graph number of events
alarm warn alarm
Reports the number of SMS errors that occurred within
the last two hours in the SMS database.

Collector: SMSCollector
EventErrors Y con 0–2147483647 1–2147483647 0–2147483647 set by coll graph number of events
alarm warn (inactive by
Reports the number of SMS errors found in the SMS default)
database. alarm

Collector: SMSCollector
EventWarnings Y con 0–2147483647 1–10 10–2147483647 set by coll gauge number of events
alarm warn alarm
Reports the number of SMS warnings found in the SMS
database.

Collector: SMSCollector
EventWarnNew Y con 0–2147483647 1–10 10–2147483647 set by coll graph number of events
alarm warn alarm
Reports the number of SMS warnings found in the SMS
database that occurred within the last two hours.

Collector: SMSCollector

PATROL Parameter Reference Manual 613

PATROL Parameter Reference Manual 614

Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 8 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
JobAgedCount N con 0–2147483647 1–2147483647 2147483647– set by coll gauge number of jobs
alarm warn 2147483647
Reports the number of completed, cancelled, or failed (inactive by
SMS jobs in the SMS database that have a status of Aged. default)
alarm
Collector: SMSDailyCollector
JobsFailed Y con 0–2147483647 5–10 10–2147483647 set by coll gauge number of jobs
alarm warn alarm
Reports the number of SMS jobs that are in a Failed state.

Collector: SMSCollector
JobsRetrying Y con 0–2147483647 5–10 10–2147483647 set by coll gauge number of jobs
alarm warn alarm
Reports the number of SMS jobs that are in a Retrying
state.

Collector: SMSCollector
MachinesInactive Y con 0–100 20–50 50–100 set by coll graph number of machines
alarm (inactive by (inactive by
Reports the number of client machines whose inventory default) default)
status is Inactive. warn alarm

Collector: SMSDailyCollector
MachinesTotal Y con 0–2147483647 0–2147483647 0–2147483647 set by coll graph number of machines
alarm (inactive by (inactive by
Reports the number of client machines that have been default) default)
inventoried at the SMS site. warn alarm

Collector: SMSCollector
MachinesUnused Y con 0–2147483647 1–2147483647 2147484647– set by coll graph number of machines
alarm (inactive by 2147483647
Reports the number of client machines whose inventory default) (inactive by
status is Unused. warn default)
alarm
Collector: SMSDailyCollector
Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 9 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MachinesUnusedPct Y con 0–100 5–25 25–100 set by coll graph percentage of clients
alarm warn alarm with Unused
Reports the percentage of client machines whose inventory status
inventory status is Unused.

Collector: SMSCollector
MifFilesNew Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of files
alarm (inactive by 2147483647
Reports the number of MIF files processed by the SMS default) (inactive by
dataloader during the specified polling cycle. warn default)
alarm
Collector: SMSCollector
MifFilesTotal Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of files
alarm (inactive by 2147483647
Reports the total number of MIF files that have been default) (inactive by
processed by the SMS dataloader since the PATROL warn default)
Agent was started. alarm

Collector: SMSCollector
MifProcessRate Y con 0–2147483647 0–2147483647 0–2147483647 set by coll graph number of MIFs per
alarm (inactive by (inactive by hr
Reports the rate at which MIF files are being processed by default) default)
the SMS dataloader. This value is expressed as files per warn alarm
hour.

Collector: SMSCollector
ResyncFileSize Y con 0–2147483647 0–2147483647 0–2147483647 set by coll graph number of KB
alarm (inactive by (inactive by
Reports the size of the SMS resync file RESYNC.CFG. default) default)
warn alarm
Collector: SMSDailyCollector
ServerCpuPct Y con 0–100 0–100 100–100 set by coll gauge percentage
(inactive by (inactive by (inactive by
Reports the CPU percentage used by the SMS server. default) default) default)
warn
Collector: SMSCollector

PATROL Parameter Reference Manual 615

PATROL Parameter Reference Manual 616

Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 10 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ServerCpuPctPriv Y con 0–100 0–100 100–100 set by coll gauge percentage
(inactive by (inactive by
Reports the percentage of privileged CPU used by the default) default)
SMS server. warn

Collector: SMSCollector
ServerCpuPctUser Y con 0–100 0–100 100–100 set by coll gauge percentage
(inactive by (inactive by
Reports the percentage of CPU user mode used by the default) default)
SMS server. warn

Collector: SMSCollector
ServerMemory N con 0–2147483647 0–2147483647 2147483647– set by coll graph number of MB
(inactive by (inactive by 2147483647
Reports the size of memory in use by SMS Server default) default) (inactive by
processes. warn default)

Collector: SMSCollector
ServerStatus Y con 0–1 1–1 1–1 set by coll stop none
warn (inactive by light
Shows that either all services are started for the selected default)
SMS server or that one or more services are stopped. This alarm
parameter only appears if you do not have the
NT_SERVICES application class loaded. If NT_SERVICES
is loaded, the ServerStatus parameter disappears.

Collector: SMSCollector
SMSCollector Y coll NA NA NA 300 sec text none
(5 min)
Gathers information for all the non-age-related primary
server-related parameters for a discovered SMS site.
SMSDailyCollector Y coll NA NA NA 86400 sec text none
(24 NA)
Gathers information from age-related site server
parameters that only needs to be gathered once per day.
Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 11 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SQLConnectDownTime Y con 0 to 2147483647 1 to 10 10 to set by coll graph number of min
alarm warn 2147483647
Alerts you to potential SQL server-related or network- alarm
related problems that are preventing the collection of
SMS status information. If the SQL server has been
unavailable longer than the time limit specified by the
SQLConnectDownTime parameter, the parameter goes
into alarm.

Collector: SMSCollector
SQLConnectStatus Y con 0 to 1 0 to 0 1 to 1 120 sec bool none
alarm warn (inactive by
Reports the status of the KM SQL server connection for default)
the purpose of gathering application data. alarm

Collector: SMSCollector
MSSMS_Site_Servers Application Class
ResyncFileSize Y std 0 to 2147483647 0 to 2147483647 0 to 2147483647 24 NA graph number of bytes
alarm (inactive by (inactive by
Reports the size of the SMS resync file RESYNC.CFG. default) default)
This parameter is provided as an alternative method to warn alarm
detect an oversized resync file. This parameter does not
require the DUMPSYNC command provided with the
BackOffice Resource Kit II.
ServerCpuPct Y con 0–100 0–100 100–100 set by coll gauge percentage of CPU
(inactive by (inactive by resources
Reports the percentage of total CPU resources used by default) default)
all SMS server processes. warn alarm

Collector: SMSCollector
ServerCpuPctPriv Y con 0–100 0–100 100–100 set by coll gauge percentage of total
(inactive by (inactive by privileged mode
Reports the percentage of total privileged mode CPU default) default) CPU used
used by all SMS server processes. warn alarm

Collector: SMSCollector

PATROL Parameter Reference Manual 617

PATROL Parameter Reference Manual 618

Table 19 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 1.2) (Part 12 of 12)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ServerCpuPctUser Y con 0–100 0–100 100–100 set by coll gauge percentage of total
(inactive by (inactive by user mode CPU used
Reports the percentage of total user mode CPU used by default) default)
all SMS Server processes. warn alarm

Collector: SMSCollector
ServerMemory N con 0–2147483647 0–2147483647 2147483647– set by coll graph number of MB
(inactive by (inactive by 2147483647
Reports the size of memory in use by SMS Server default) default) (inactive by
processes. warn default)
alarm
Collector: SMSCollector
ServiceStatus Y con 0–1 1–1 1–1 set by coll stop none
warn (inactive by light
Shows that either all services are started for the selected default)
SMS server or that one or more services are stopped. This alarm
parameter only appears if you do not have the
NT_SERVICES application class loaded. If NT_SERVICES
is loaded, the ServerStatus parameter disappears.

Collector: SMSCollector
PATROL for Microsoft SMS 2.1.01 for Microsoft SMS 2.0

Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 1 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSSMS_Advertisements Application Class
AdvertisementsFailed Y con 0–100 1–5 6–100 set by coll graph number of
warn alarm advertisements
Displays the number of failed advertisements on the
selected primary site and its secondary sites.

Collector: SMSCollector
CompletedPgms Y con 0–100 0–100 100–100 set by coll graph number of clients
(inactive by (inactive by (inactive by
Reports the number of clients reporting that the default) default) default)
advertised program ran successfully. warn alarm

Collector: SMSCollector
Expired Y con 0–1 0–0 1–1 set by coll stop none
warn (inactive by light
Indicates whether or not an advertisement is expired. default)
alarm
Collector: SMSCollector
FailedClientPct Y con 0–100 0–100 100–100 set by coll gauge percentage of errors
(inactive by (inactive by (inactive by experienced by
Reports the percentage of clients that have experienced default) default) default) clients
an error while attempting to receive the selected warn alarm
advertisement.

Collector: SMSCollector

PATROL Parameter Reference Manual 619

PATROL Parameter Reference Manual 620

Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 2 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FailedClients Y con 0–100 0–100 100–100 set by coll gauge percentage of errors
(inactive by (inactive by (inactive by experienced by
Reports the percentage of clients that have experienced default) default) default) clients
an error while attempting to receive the selected warn alarm
advertisement.

Collector: SMSCollector
FailedPgms Y con 0–100 1–5 6–100 set by coll graph number of clients
warn alarm
Reports the number of clients that have experienced an
error while attempting to receive the selected
advertisement.

Collector: SMSCollector
PackageID Y con 0–100 0–100 100–100 set by coll text none
(inactive by (inactive by (inactive by
Reports the SMS package ID of the underlying package default) default) default)
that this advertisement promotes. warn alarm

Collector: SMSCollector
ReceiveClients Y con 0–100 0–100 100–100 set by coll graph number of clients
(inactive by (inactive by (inactive by
Reports number of clients that received the default) default) default)
advertisement. warn alarm

Collector: SMSCollector
SMSCollector Y coll NA NA NA 300 sec text none
(5 min)
Gathers consumer parameter information for the
application class.
StartedPgms Y con 0–100 0–100 100–100 set by coll graph number of clients
(inactive by (inactive by (inactive by
Reports the number of clients that started running the default) default) default)
advertised program. warn alarm

Collector: SMSCollector
Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 3 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TargetClients Y con 0–100 0–100 100–100 set by coll graph number of clients
(inactive by (inactive by (inactive by
Reports the number of clients to which the advertisement default) default) default)
was sent. warn alarm

Collector: SMSCollector
MSSMS_Files Application Class
AverageFileAge Y con 0–24 0–24 24–24 set by coll graph number of hr
(inactive by (inactive by
Reports the average age of files in the directory matching default) default)
the file name pattern mask. warn alarm

Collector: SMSCollector
AverageFileSize Y con 0–1024 0–1024 (inactive 1024–1024 set by coll graph number of bytes
warn by default) (inactive by
Reports the average size of files in the directory matching warn default)
the file name pattern mask. alarm

Collector: SMSCollector
FileAgeNew Y con 0–24 0–24 24–24 set by coll graph number of hr
(inactive by (inactive by
Reports the age of the newest file in the directory default) default)
matching the file name pattern mask. warn alarm

Collector: SMSCollector
FileAgeOld Y con 0–24 0–24 24–24 set by coll graph number of hr
(inactive by (inactive by
Reports the age of the oldest file in the directory matching default) default)
the file name pattern mask. warn alarm

Collector: SMSCollector

PATROL Parameter Reference Manual 621

PATROL Parameter Reference Manual 622

Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 4 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FileCount Y con 0–100 0–100 100–100 set by coll graph number of files
(inactive by (inactive by
Reports the number of files in the directory that match the default) default)
file name pattern mask. warn alarm

Collector: SMSCollector
SMSCollector Y coll NA NA NA 300 sec text none
(5 min)
Gathers consumer parameter information for the
application class.
TotalBytes Y con 0–1024 0–1024 (inactive 1024–1024 set by coll gauge number of bytes
by default) (inactive by
Reports the total bytes used by files in the directory warn default)
matching the file name pattern mask. alarm

Collector: SMSCollector
TotalDiskPct Y con 0–100 40–60 60–100 set by coll graph percentage of total
warn alarm disk space used by
Reports the percentage of total disk space used by files in files in the directory
the directory matching the file name pattern mask.

Collector: SMSCollector
MSSMS_Packages Application Class
Failed Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of clients
(inactive by 2147483647
Reports the number of distribution points that failed to default) (inactive by
receive the package. warn default)
alarm
Collector: SMSCollector
FailedPct Y con 0–2147483647 0–2147483647 2147483647– set by coll gauge percentage of
(inactive by 2147483647 distribution points
Reports the percentage of distribution points that failed default) (inactive by that failed to receive
to receive the package. warn default) the package
alarm
Collector: SMSCollector
Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 5 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Installed Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of clients
(inactive by 2147483647
Reports the number of distribution points that have default) (inactive by
received the package. warn default)
alarm
Collector: SMSCollector
Retrying Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of
(inactive by 2147483647 distribution points
Reports the number of distribution points that are default) (inactive by
retrying to receive the package. warn default)
alarm
Collector: SMSCollector
SMSCollector Y coll NA NA NA 300 sec text none
(5 min)
Gathers consumer parameter information for the
application class.
Targeted Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of
(inactive by 2147483647 distribution points
Reports the number of distribution points this package default) (inactive by
was sent to. warn default)
alarm
Collector: SMSCollector
MSSMS_Queues Application Class
SMSCollector Y coll NA NA NA 600 sec text none
(10 min)
Gathers consumer parameter information for the
application class.
TotalObjectsDequeued Y con 0–100 0–100 100–100 set by graph number of objects
(inactive by (inactive by (inactive by
Displays the total number of objects removed from the default) default) default)
queue by the source component since the source and warn alarm
destination components were restarted.

Collector: SMSCollector

PATROL Parameter Reference Manual 623

PATROL Parameter Reference Manual 624

Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 6 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TotalObjectsEnqueued Y con 0–100 0–100 100–100 set by coll graph number of objects
(inactive by (inactive by (inactive by
Displays the total number of objects added to the queue default) default) default)
by the source component since the source and destination warn alarm
components were restarted.

Collector: SMSCollector
MSSMS_Secondary_Servers Application Class
DDRBadPct Y std 0–100 1–25 26–100 set by coll gauge percentage of bad
warn alarm discovery data
Displays the percentage of bad discovery data records records processed
processed by Discovery Data Manager during its current
session.
DDREnqueued N std 0–2147483647 0–2147483647 2147483647– set by coll graph number of records
(inactive by 2147483647
Displays the number of discovery data records waiting in default) (inactive by
Discovery Data Manager’s input queue the last time that warn default)
Discovery Data Manager scanned the queue. alarm
DDRProcessRate N std 0–2147483647 0–2147483647 2147483647– set by coll graph number of records
(inactive by 2147483647 per min
Displays the number of discovery data records processed default) (inactive by
by Discovery Data Manager during its last minute. warn default)
alarm
DDRTotal N std 0–2147483647 0–2147483647 2147483647– set by coll graph number of records
(inactive by 2147483647
Displays the total number of Discovery Data Records default) (inactive by
processed by Discovery Data Manager during its current warn default)
session. alarm
ServerCpuPct N std 0–2147483647 0–2147483647 2147483647– set by coll graph number of records
(inactive by 2147483647
Displays the total number of Discovery Data Records default) (inactive by
processed by Discovery Data Manager during its current warn default)
session. alarm
Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 7 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ServerCpuPctPriv Y con 0–100 0–100 100–100 set by coll gauge percentage of total
(inactive by (inactive by privileged mode
Reports the percentage of total privileged mode CPU default) default) CPU used
used by all SMS server processes. warn alarm

Collector: SMSCollector
ServerCpuPctUser Y con 0–100 0–100 100–100 set by coll gauge percentage of total
(inactive by (inactive by user mode CPU used
Reports the percentage of total user mode CPU used by default) default)
all SMS Server processes. warn alarm

Collector: SMSCollector
ServerMemory N con 0–2147483647 0–2147483647 2147483647– set by coll graph number of MB
(inactive by 2147483647
Reports the size of memory in use by SMS secondary default) (inactive by
server processes. warn default)
alarm
Collector: SMSCollector
ServerStatus N con 1–2 2–2 1–1 set by coll stop none
(inactive by (inactive by light
Reports the status level for the selected SMS server. default) default)
warn alarm
The status levels are:

1 - all services are started

2 - one or more services are stopped

Note: This parameter only appears if you do not have the

NT_SERVICES application class loaded. If NT_SERVICES
is loaded, the ServerStatus parameter disappears.

Collector: SMSCollector

PATROL Parameter Reference Manual 625

PATROL Parameter Reference Manual 626

Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 8 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SMSCollector Y coll NA NA NA 300 sec text none
(5 min)
Gathers consumer parameter information for the
application class.
MSSMS_Senders Application Class
AttemptedBytes Y con 0–100 0–100 100–100 set by coll graph number of bytes
(inactive by (inactive by (inactive by
Displays the total number of bytes the sender has default) default) default)
attempted to send since beginning execution. warn alarm

Collector: SMSCollector
AverageRate Y con 0–100 0–100 100–100 set by coll graph throughput per sec
(inactive by (inactive by (inactive by
Displays the average rate of throughput of the sender. default) default) default)
warn alarm
Collector: SMSCollector
FailedPct Y con 0–100 1–25 26–100 set by coll gauge percentage of failed
warn alarm bytes
Displays the percentage of bytes failing sending since
beginning execution.

Collector: SMSCollector
SendingPct Y con 0–100 0–100 100–100 set by coll gauge percentage of bytes
(inactive by (inactive by attempted
Displays the percentage of bytes all sending threads default) default)
attempted to send. warn alarm

Collector: SMSCollector
SentPct Y con 0–100 0–100 100–100 set by coll gauge percentage of bytes
(inactive by (inactive by (inactive by sent
Displays the percentage of bytes sent. default) default) default)
warn alarm
Collector: SMSCollector
Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 9 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SMSCollector Y coll NA NA NA 600 sec text none
(10 min)
Gathers consumer parameter information for the
application class.
ThreadCount Y con 0–100 0–100 100–100 set by coll gauge number of threads
(inactive by (inactive by (inactive by
Displays the number of threads currently sending to a default) default) default)
destination. warn alarm

Collector: SMSCollector
MSSMS_Servers Application Class
AdvertisementsFailed Y con 0–100 1–5 6–100 set by coll graph number of
warn alarm advertisements
Displays the number of failed advertisements on the
selected primary site and its secondary sites.

Collector: SMSCollector
AdvertisementsTotal Y con 0–100 0–100 (inactive 100–100 set by coll graph number of
(inactive by by default) (inactive by advertisements
Displays the total number of advertisements. default) warn default)
alarm
Collector: SMSCollector
DDRBadPct Y con 0–100 1–25 26–100 set by coll gauge percentage of bad
warn alarm discovery data
Displays the percentage of bad discovery data records records processed
processed by Discovery Data Manager during its current
session.

Collector: SMSCollector
DDREnqueued Y con 0–100 0–100 100–100 set by coll graph number of records
(inactive by (inactive by (inactive by
Displays the number of discovery data records waiting in default) default) default)
Discovery Data Manager’s input queue the last time that warn alarm
Discovery Data Manager scanned the queue.

PATROL Parameter Reference Manual 627

PATROL Parameter Reference Manual 628

Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 10 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DDRProcessRate Y con 0–100 0–100 100–100 set by coll graph number of records
(inactive by (inactive by (inactive by per min
Displays the number of discovery data records processed default) default) default)
by Discovery Data Manager during its last minute. warn alarm
DDRTotal Y con 0–100 0–100 100–100 set by coll graph number of records
(inactive by (inactive by (inactive by
Displays the total number of Discovery Data Records default) default) default)
processed by Discovery Data Manager during its current warn alarm
session.
ErrorsNew Y con 0–100 1–5 6–100 set by coll graph number of errors
warn alarm
Displays the number of error messages occurring within
the specified period.
ErrorsTotal Y con 0–100 10–100 (inactive 100–100 set by coll graph number of errors
by default) (inactive by
Displays the total number of error messages. warn default)
alarm
Collector: SMSCollector
InfosTotal Y con 0–100 0–100 (inactive 100–100 set by coll graph number of
by default) (inactive by informational
Displays the total number of informational messages. warn default) messages
alarm
Collector: SMSCollector
MIFBadPct Y con 0–100 1–25 26–100 set by coll gauge percent of bad
warn alarm inventory records
Displays the percent of bad inventory records processed processed
by Inventory Data Loader during its current session.

Collector: SMSCollector
Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 11 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MIFEnqueueda Y con 0–100 0–100 (inactive 100–100 set by coll graph number of records
(inactive by by default) (inactive by
Displays the number of inventory records waiting in the default) warn default)
Inventory Data Loader’s input queue at the last time alarm
Inventory Data Loader scanned the queue.

Collector: SMSCollector
MIFProcessRate Y con 0–100 0–100 (inactive 100–100 set by coll graph number of records
(inactive by by default) (inactive by per min
Displays the number of inventory records processed by default) warn default)
Inventory Data Loader during its last minute. alarm

Collector: SMSCollector
MIFTotal Y con 0–100 0–100 (inactive 100–100 set by coll graph number of records
(inactive by by default) (inactive by
Displays the number of inventory records processed by default) warn default)
the Inventory Data Loader during its current session. alarm

Collector: SMSCollector
MachinesTotal Y con 0–100 0–100 (inactive 100–100 set by coll graph number of machines
(inactive by by default) (inactive by
Displays the total number of client machines. default) warn default)
alarm
Collector: SMSCollector
PackagesFailed Y con 0–100 1–5 6–100 set by coll graph number of packages
warn alarm
Displays the number of failed packages.

Collector: SMSCollector
ProgramsFailed Y con 0–100 1–5 6–100 set by coll graph number of programs
warn alarm
Displays the number of failed programs.

Collector: SMSCollector

PATROL Parameter Reference Manual 629

PATROL Parameter Reference Manual 630

Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 12 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ServerCpuPct Y con 0–100 0–100 (inactive 100–100 set by coll gauge percentage of total
by default) (inactive by CPU resources used
Reports the percentage of total CPU resources used by all warn default)
SMS server processes. alarm

Collector: SMSCollector
ServerCpuPctPriv Y con 0–100 0–100 (inactive 100–100 set by coll gauge percentage of total
by default) (inactive by privileged mode
Reports the percentage of total privileged mode CPU warn default) CPU used
used by all SMS server processes. alarm

Collector: SMSCollector
ServerCpuPctUser Y con 0–100 0–100 (inactive 100–100 set by coll gauge percentage of total
by default) (inactive by user mode CPU used
Reports the percentage of total user mode CPU used by warn default)
all SMS Server processes. alarm

Collector: SMSCollector
ServerMemory N con 0–2147483647 0–2147483647 2147483647– set by coll graph number of MB
(inactive by 2147483647
Reports the size of memory in use by SMS Server default) (inactive by
processes. warn default)
alarm
Collector: SMSCollector
Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 13 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ServerStatus N con 1–2 2–2 1–1 set by coll stop none
warn (inactive by light
Reports the status for the selected SMS server. The status default)
levels are: alarm

1 - all services are started

2 - one or more services are stopped

Note: This parameter only appears if you do not have the

NT_SERVICES application class loaded. If NT_SERVICES
is loaded, the ServerStatus parameter disappears.

Collector: SMSCollector
SINVBadPct Y con 0–100 1–25 26–100 set by coll gauge percentage of bad
warn alarm records processed
Displays the percentage of bad software inventory
records processed by Software Inventory Processor
during its current session.

Collector: SMSCollector
SINVEnqueued Y con 0–100 0–100 100–100 set by coll gauge number of records
(inactive by (inactive by (inactive by
Displays the number of software inventory records default) default) default)
waiting in the Software Inventory Processor’s input warn alarm
queue at the last time the Software Inventory Processor
scanned the queue.

Collector: SMSCollector
SINVProcessRate Y con 0–100 0–100 100–100 set by coll graph number of records
(inactive by (inactive by (inactive by per min
Displays the number of software inventory records default) 100 default) 100 default)
processed by Software Inventory Processor during its last (inactive by (inactive by alarm
minute. default) default)
warn
Collector: SMSCollector

PATROL Parameter Reference Manual 631

PATROL Parameter Reference Manual 632

Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 14 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SINVTotal Y con 0–100 (inactve 0–100 100–100 set by coll graph number of records
by default) (inactive by (inactive by
Displays the number of software inventory records default) default)
processed by Software Inventory Processor during its warn alarm
current session.

Collector: SMSCollector
SMSCollector Y coll NA NA NA 300 sec text none
(5 min)
Gathers all of the consumer parameter information for
the application class.
WarningsNew Y con 0–100 5–20 21–100 set by coll graph number of warnings
warn alarm
Displays the number of warning messages occurring
within the specified period.

Collector: SMSCollector
WarningsTotal Y con 0–100 50–100 100–100 set by coll graph number of warnings
(inactive by (inactive by
Displays the total number of warning messages. default) default)
warn alarm
Collector: SMSCollector
MSSMS_Status_Msgs Application Class
CorruptFiles Y con 0–100 1–100 100–100 set by coll graph number of files
warn (inactive by
Displays the number of corrupt software inventory (.SVF) default)
files received by the SMS_STATUS_MANAGER via the alarm
Status Manager inbox since SMS_STATUS_MANAGER
was last started.

Collector: SMSCollector
Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 15 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LoggedEventsNew Y con 0–100 (inactve 0–100 100–100 set by coll graph number of events
by default) (inactive by (inactive by
Displays the number of status messages reported by default) default)
SMS_STATUS_MANAGER to the Windows NT warn alarm
Application Event during the specified interval for new
events.

Collector: SMSCollector
LoggedEventsTotal Y con 0–100 (inactve 0–100 100–100 set by coll graph number of events
by default) (inactive by (inactive by
Displays the number of status messages reported by default) default)
SMS_STATUS_MANAGER to the Windows NT warn alarm
Application Event Log on the site since
SMS_STATUS_MANAGER was last started.

Collector: SMSCollector
ProcessRate Y con 0–100 (inactve 0–100 100–100 set by coll graph number of messages
by default) (inactive by (inactive by per sec
Displays the number of status messages processed by the default) default)
SMS_STATUS_MANAGER per second. warn alarm

Collector: SMSCollector
RecvMsgsNew Y con 0–100 (inactve 0–100 100–100 set by coll graph number of messages
by default) (inactive by (inactive by
Displays the number of status messages received by default) default)
SMS_STATUS_MANAGER during the defined interval. warn alarm

Collector: SMSCollector
RecvMsgsTotal Y con 0–100 (inactve 0–100 100–100 set by coll graph number of messages
by default) (inactive by (inactive by
Displays the total number of status messages received by default) default)
SMS_STATUS_MANAGER since warn alarm
SMS_STATUS_MANAGER was last started.

Collector: SMSCollector

PATROL Parameter Reference Manual 633

PATROL Parameter Reference Manual 634

Table 20 PATROL for Microsoft SMS 2.1.01 (parameters that support Microsoft SMS 2.0) (Part 16 of 16)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ReplHighPriority Y con 0–100 (inactve 0–100 100–100 set by coll graph number of messages
by default) (inactive by (inactive by
Displays the number of status messages replicated at high default) default)
priority by SMS_STATUS_MANAGER to the parent site warn alarm
since SMS_STATUS_MANAGER was last started.

Collector: SMSCollector
ReplLowPriority Y con 0–100 (inactve 0–100 100–100 set by coll graph number of messages
by default) (inactive by (inactive by
Displays the number of status messages replicated at low default) default)
priority by SMS_STATUS_MANAGER to the parent site warn alarm
since SMS_STATUS_MANAGER was last started.

Collector: SMSCollector
ReplNormalPriority Y con 0–100 (inactve 0–100 100–100 set by coll graph number of messages
by default) (inactive by (inactive by
Displays the number of status messages replicated at default) default)
normal priority by SMS_STATUS_MANAGER to the warn alarm
parent site since SMS_STATUS_MANAGER was last
started.

Collector: SMSCollector
SMSCollector Y coll NA NA NA 600 sec text none
(10 min)
Gathers all of the consumer parameter information for
the application class.
WrittenToDb Y con 0–100 (inactve 0–100 100–100 set by coll graph number of messages
by default) (inactive by (inactive by
Displays the number of status messages written by the default) default)
SMS_STATUS_MANAGER to the SMS database since warn alarm
SMS_STATUS_MANAGER was last started.

Collector: SMSCollector
PATROL for Microsoft Host Integration Server 1.2.03

Table 21 PATROL for Microsoft Host Integration Server 1.2.03 (Part 1 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MSSNA_Adapters Application Class
AdapterColl Y std NA NA NA 600 sec text none
(10 min)
Gathers data from all parameters in an MSSNA_Adapter
application class instance.
ConnectFailRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph failures per min
alarm (inactive by 2147483647
Reports the rate of failed connection attempts. default) (inactive by
warn default)
Collector: AdapterColl alarm
ConnectFailures Y con 0–2147483647 1–2147483647 2147483647– set by coll graph number of failures
alarm alarm 2147483647
Reports the number of adapter connection failures that (inactive by
occurred during the polling cycle. default)
alarm
Collector: AdapterColl
DataProcessRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which data is processed by the SNA default) (inactive by
Server. warn default)
alarm
Collector: AdapterColl
DataRecvRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which the SNA Server receives data. default) (inactive by
warn default)
Collector: AdapterColl alarm

PATROL Parameter Reference Manual 635

PATROL Parameter Reference Manual 636

Table 21 PATROL for Microsoft Host Integration Server 1.2.03 (Part 2 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DataXmitRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which the SNA Server transmits data. default) (inactive by
warn default)
Collector: AdapterColl alarm
Failures Y con 0–2147483647 1–2147483647 2147483647– set by coll graph number of failures
alarm alarm 2147483647
Reports the number of adapter failures that occurred (inactive by
during the polling cycle. default)
alarm
Collector: AdapterColl
FrameProcessRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which the SNA Server processes default) (inactive by
frames. warn default)
alarm
Collector: AdapterColl
FrameRecvRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which the SNA Server receives frames. default) (inactive by
warn default)
Collector: AdapterColl alarm
FrameXmitRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which the SNA Server transmits default) (inactive by
frames. warn default)
alarm
Collector: AdapterColl
MSSNA_Connections Application Class
ActiveSessions Y con 0–2147483647 1–2147483647 2147483647– set by coll graph MB
alarm (inactive by 2147483647
Reports the number of sessions currently active on the default) (inactive by
specified connection. warn default)
alarm
Collector: ConnectionColl
Table 21 PATROL for Microsoft Host Integration Server 1.2.03 (Part 3 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ConnectionColl Y std NA NA NA 600 sec text none
(10 min)
Gathers data from all parameters in an
MSSNA_Connections application class instance.
DataProcessRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which data is processed for the current default) (inactive by
connection. warn default)
alarm
Collector: ConnectionColl
DataRecvRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which data is received for the current default) (inactive by
connection. warn default)
alarm
Collector: ConnectionColl
DataXmitRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which data is transmitted for the default) (inactive by
current connection. warn default)
alarm
Collector: ConnectionColl
Status Y con 1–6 4–4 6–6 set by coll stoplight 1 - active,
alarm warn (inactive by 2 - pending,
Reports the status of the current SNA connection. default) 3 - stopping,
alarm 4 - inactive
Collector: ConnectionColl
MSSNA_LU_Sessions Application Class
DataProcessRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which data is processed by the default) (inactive by
specified LU Session. warn default)
alarm
Collector: CollecSessColl

PATROL Parameter Reference Manual 637

PATROL Parameter Reference Manual 638

Table 21 PATROL for Microsoft Host Integration Server 1.2.03 (Part 4 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DataRecvRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which data is received by the specified default) (inactive by
LU Session. warn default)
alarm
Collector: CollecSessColl
DataXmitRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which data is transmitted by the default) (inactive by
specified LU Session. warn default)
alarm
Collector: CollecSessColl
LUSessColl Y std NA NA NA 600 sec text none
(10 min)
Gathers data from all parameters in an
MSSNA_LU_Sessions application class instance.
MSSNA_Servers Application Class
ActiveConnections Y con 0–2147483647 0–2147483647 2147483647– set by coll graph none
alarm (inactive by 2147483647
Reports the number of SNA Server client connections default) (inactive by
with activity during the polling cycle. default)

Collector: ServerColl
ConfigFileUpdate Y con 0–1 1–1 0–0 set by coll bool 0 - true,
alarm alarm (inactive by 1 - false
Reports whether the SNA configuration file was updated default)
during the polling cycle.

Collector: ServerColl
InactiveConnections Y con 0–2147483647 0–2147483647 2147483647– set by coll graph none
alarm (inactive by 2147483647
Reports the number of client connections with the SNA default) (inactive by
Server that had no activity during the polling cycle. default)

Collector: ServerColl
Table 21 PATROL for Microsoft Host Integration Server 1.2.03 (Part 5 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ServerColl Y std NA NA NA 600 sec text none
(10 min)
Gathers data from all parameters in an MSSNA_Servers
application class instance.
ServerCpuPct Y con 0–100 80–90 91–100 set by coll gauge percentage of CPU
alarm warn alarm usage by SNA Server
Reports the CPU usage by all SNA Server processes as a processes
percentage of the total CPU usage.

Collector: ServerColl
ServerCpuPctPriv Y con 0–100 80–90 91–100 set by coll gauge percentage of total
alarm warn alarm CPU usage by
Reports the privileged CPU usage by SNA Server privileged by SNA
processes as a percentage of the total CPU usage. Server processes

Collector: ServerColl
ServerCpuPctUser Y con 0–100 80–90 91–100 set by coll gauge percentage of total
alarm warn alarm user mode CPU
Reports the percentage of total user mode CPU usage by usage by all SNA
all SNA Server processes. Server processes

Collector: ServerColl
ServerMemory Y con 0–2147483647 0–2147483647 2147483647– set by coll graph MB
alarm (inactive by 2147483647
Reports the amount of memory that is being used by SNA default) (inactive by
Server processes. warn default)
alarm
Collector: ServerColl
MSSNA_TN3270 Application Class
ConnectsActive Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of connects
alarm (inactive by 2147483647
Reports on the number of active connections to the default) (inactive by
TN3270 service. warn default)
alarm
Collector: TN3270ServerColl

PATROL Parameter Reference Manual 639

PATROL Parameter Reference Manual 640

Table 21 PATROL for Microsoft Host Integration Server 1.2.03 (Part 6 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
RUInbound Y con 0–2147483647 1–2147483647 2147483647– set by coll graph number of RUs
alarm (inactive by 2147483647
Reports the number of Request/Response Units (RUs) default) (inactive by
sent to the IBM host. warn default)
alarm
Collector: TN3270ServerColl
RUOutbound Y con 0–2147483647 1–2147483647 2147483647– set by coll graph number of RUs
alarm (inactive by 2147483647
Reports the number of Request/Response Units (RUs) default) (inactive by
received from the IBM host. warn default)
alarm
Collector: TN3270ServerColl
SessionsActive Y con 0–2147483647 0–2147483647 2147483647– set by coll graph MB
alarm (inactive by 2147483647
Reports the number of active sessions in the TN3270 default) (inactive by
Service. warn default)
alarm
Collector: TN3270ServerColl
SessionsFailed Y con 0–2147483647 1–2147483647 2147483647– set by coll graph number of sessions
alarm (inactive by 2147483647
Reports the number of sessions that failed during the default) (inactive by
polling period. alarm default)
alarm
Collector: TN3270ServerColl
SessionsPctFailed Y con 0–100 60–79 80–100 set by coll graph percentage of failed
alarm warn alarm active sessions per
Reports the percentage of active sessions that failed polling cycle
during the polling cycle.

Collector: TN3270ServerColl
TN3270ServerColl Y std NA NA NA 600 sec text none
(10 min)
Gathers data from all parameters in an MSSNA_TN3270
Server application class instance.
Table 21 PATROL for Microsoft Host Integration Server 1.2.03 (Part 7 of 7)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TcpProcessRatel Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports on the rate at which TCP data is processed. default) (inactive by
alarm default)
Collector: TN3270ServerColl alarm
TcpRecvRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports on the rate at which TCP data bytes are received. default) (inactive by
alarm default)
Collector: TN3270ServerColl alarm
TcpSendRate Y con 0–2147483647 0–2147483647 2147483647– set by coll graph bytes per sec
alarm (inactive by 2147483647
Reports the rate at which TCP databytes are sent. default) (inactive by
alarm default)
Collector: TN3270ServerColl alarm
UsersActive Y con 0–2147483647 0–2147483647 2147483647– set by coll graph number of users
alarm (inactive by 2147483647
Reports the number of active users in the TN3270 Service. default) (inactive by
warn default)
Collector: TN3270ServerColl alarm

PATROL Parameter Reference Manual 641

PATROL Parameter Reference Manual 642
PATROL for Microsoft SQL Server 4.1.20

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 1 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Availability Application Class
ARATest Y con <0, >100 0–50 OK 50–100 NA graph test results
warning alarm
Allows testing of automated recovery actions without
causing false alarms on parameters being monitored. You
can set automated recovery actions through the KM
Admin => Setup/Configure KM => ARA Settings menu
command. You can test that setting through the ARA
Settings => ARA Test menu command.
BlockerProcs Y con undef 1–100 undef set by coll graph number of processes
alarm
Provides information about processes that are holding
locks and blocking other processes longer than the time
period set by using the Configure Auto User Monitoring
menu command (120 seconds by default). This parameter
does not monitor logons that you excluded by using the
KM Admin => User Monitoring Admin => Exclude
Specific User menu command.

Collector: MonProbUsers

PATROL Parameter Reference Manual 643

PATROL Parameter Reference Manual 644

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 2 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ErrorLogUpdates Y con undef undef 1–1 set by coll bool none
alarm
Monitors the SQL Server error log for updates. This
parameter goes into an alarm state if the updated error
log text contains one of the following strings: Error, Msg,
or WARNING, or any strings you enter using the KM
Admin => SQL Server Error Log Filter menu command.

Reset the alarm by acknowledging it with the PEM or by

using the KM Admin => Reset Parameter Alarm =>
ErrorLogUpdates menu command.

Collector: ErrorLogColl
Failover Y con undef 1–1 2–2 set by coll graph 1 or 2
OK alarm
Appears only when the instance is running on a virtual
PATROL Agent in a cluster.

Creates an annotation that contains information about a

failover whenever a failover occurs. The alarm for this
parameter is disabled by default. You can enable the
alarm by using the Monitoring Setup menu command.

If a failover is detected, the value is set to 1 if the alarm is

disabled and to 2 if the alarm is enabled.

Collector: MSSQL_SERVER discovery

NumBlockedProcesses Y con <0, >15 undef undef set by coll gauge number of processes
alarm
Monitors the number of processes that are currently
blocked.

Collector: ProcessColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 3 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SQLAgentJobFailures Y std <0, >0 undef undef 15 min graph number of failed jobs
alarm
Monitors the completion status of the jobs that the SQL
Server Agent (SQL Executive in 6.5) runs. These jobs
usually include scheduled backup and maintenance
procedures.

You can clear the alarm by using the Reset Parameter

Alarm menu command.
SQLAgentStatus Y std undef 1–1 undef 5 min bool none
alarm
Monitors the up and down status of the SQL Server
Agent (SQL Executive in 6.5), if SQL Server Agent
monitoring is enabled. It is disabled by default. You can
switch SQL Server Agent monitoring on and off by using
the KM Admin => Setup/Configure KM => SQL Server
Agent/DTC Setup menu command.
SQLServerStatus Y con undef 1–1 undef NA bool none
alarm
Tracks the status of the SQL Server. If parameter history
collection is enabled, statistics on the availability of the
SQL Server are collected over long periods. If SQL Server
goes off line, and it was not shut down from within
PATROL, SQLServerStatus goes into an alarm state.

Collector: MSSQL_SERVER discovery

SuspectDatabases Y std undef 1–1 undef 4 hr bool none
alarm
Determines which databases, if any, are marked as
suspect (corrupt) by the SQL Server. This parameter only
monitors databases that are setup for monitoring.
However, when it goes into an alarm state, this parameter
generates a report that lists all suspect databases,
including those that are not monitored.

PATROL Parameter Reference Manual 645

PATROL Parameter Reference Manual 646

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 4 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Cache Application Class
AvgFreePageScan Y con undef undef undef set by coll graph number of buffers

Microsoft SQL Server 6.5 only.

Displays the average number of data cache buffers

scanned by LazyWriter scans while searching for an
unused buffer to replenish the free buffer pool.

Collector: SQLServerColl
MaxFreePageScan Y con undef undef undef set by coll graph number of buffers

Microsoft SQL Server 6.5 only.

Displays the maximum number of data cache buffers

scanned by LazyWriter while searching for unused
buffers to replenish the free buffer pool.

Collector: SQLServerColl
NumberOfFreeBuffers Y con undef undef undef set by coll graph number of buffers

Displays the number of cache buffers that are in the free

buffer pool.

Collector: SQLServerColl
PgsFetchedIntoCachePerSec Y con undef undef undef set by coll graph number of pages per
sec
Microsoft SQL Server 6.5 only.

Displays the number of 2 KB pages that the Read Ahead

Manager prefetches into cache.

Collector: SQLServerColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 5 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PgsFoundInCachePerSec Y con undef undef undef set by coll graph number of pages
found per sec
Microsoft SQL Server 6.5 only.

Displays the number of 2 KB pages that the Read Ahead

Manager finds in cache.

Collector: SQLServerColl
ReadAheadEffectiveness Y con undef undef undef set by coll graph percentage of pages
in cache
Microsoft SQL Server 6.5 only.

Displays the percentage of pages that are found in cache.

If this value is less than 50 percent, then pages are read
from the disk more than half of the time (read ahead is
not effective).

Collector: SQLServerColl
SlotsUsed Y con undef undef undef set by coll graph number of slots used

Microsoft SQL Server 6.5 only.

Displays the number of total slots that are used. The

number of used slots indicates the number of queries that
are using Read Ahead at any given time.

Collector: SQLServerColl

PATROL Parameter Reference Manual 647

PATROL Parameter Reference Manual 648

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 6 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Capacity Application Class
ConnectionsRemaining Y con undef 0–2 3–4 set by coll graph number of available
alarm warn connections
Monitors the number of user connections available for
use on the SQL Server and goes into an alarm state when
the number falls below the alarm thresholds.

This parameter uses the MASTER .. SYSCURCONFIGS

table to determine the maximum number of user
connections that are allowed and the SQL Server General
Statistics counter, User Connections, to calculate the
number of connections remaining.

Collector: CurConfigsColl
ErrorLogSize Y con undef undef undef set by coll graph size of error log in KB

Monitors the size of the SQL Server error log in kilobytes.

Collector: ErrorLogColl
IdleProcs Y con undef 1–100 undef set by coll graph number of idle
alarm processes
Provides information about processes that are idle longer
than the amount of time set by using the Configure Auto
User Monitoring menu command (20 minutes by
default). This parameter does not monitor processes that
you excluded from monitoring by using the KM Admin
=> User Monitoring Admin => Exclude Specific User
menu command.

Collector: MonProbUsers
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 7 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LocksRemaining Y con undef 1–50 51–75 set by coll graph number of available
alarm warn locks
Monitors the number of locks that are available for use, as
defined in the MASTER .. SYSCURCONFIGS table.

Collector: CurConfigsColl
NumProcesses Y con undef undef undef set by coll graph number of
processes
Tracks the number of SQL Server processes. This value is
derived from the total number of rows in the MASTER ..
SYSPROCESSES table.

Collector: ProcessColl
OpenDbRemaining Y con undef 0–1 undef set by coll graph number of open
alarm databases remaining
Microsoft SQL Server 6.5 only.

Compares the number of databases that are accessed by

users and processes against the configuration limit for
open databases, and reports the number of open
databases that are remaining. The limit on the number of
databases is defined in the MASTER .. SYSCURCONFIGS
table. PATROL requires one open database slot for
monitoring.

Collector: CurConfigsColl
UserConnections Y con undef undef undef set by coll graph number of
connections
Displays the number of user connections.

Collector: SQLServerColl

PATROL Parameter Reference Manual 649

PATROL Parameter Reference Manual 650

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 8 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Collectors Application Class
CheckConfiguration Y std <0, >0 undef undef 5 min bool none
alarm
Ensures that the PATROL Agent default account exists
and that it has SQL Server administrator privileges;
installs the sp_patrol_ monitor and sp_patrol_user stored
procedures in the SQL Server master database; ensures
that the SQL Server performance counters are available to
PATROL; gathers data on the availability of the global
channel; and, upon a global channel failure, attempts to
reconnect to the global channel.

Other parameters check the status of this parameter

before executing, and parameters collecting data report
any global channel lock timeouts to this parameter.
CurConfigsColl Y std <0, >0 undef undef 15 min bool none
alarm
Gathers information from the SQL Server MASTER ..
SYSCURCONFIGS table pertaining to SQL Server
configuration.
DbSpaceColl Y std <0, >0 undef undef 34 min bool none
alarm
Collects information on space used and space free for
databases (SQL Server 6.5 and later) and for files and file
groups (SQL Server 7.0 and later). It uses sp_spaceused to
calculate the space available, based on the settings for the
database; for example, maxsize or current size plus x
percent. For more information, see the online Help.

Warning: This parameter does not function correctly

when the db file is mapped to a shared drive by using a
universal naming convention (UNC) format.
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 9 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DbStructureColl Y std <0, >0 undef undef 5 min bool none
alarm
Collects information about monitored databases. Creates
and destroys database instances (SQL Server 6.5 and later)
and file and file group instances (SQL Server 7.0 and later).

Note: This parameter does not discover or monitor

databases with names that contain characters other than
A–Z, a–z, 0–9, and underscore (_).
ErrorLogColl Y std <0, >0 undef undef 1 min bool none
alarm
Monitors the SQL Server error log for updates, and then
filters new log entries for search strings that you entered
by using the KM Admin => SQL Server Error Log Filter
menu command. Error, Msg, and WARNING are the
default search strings.
GlobalVarsColl Y std <0, >0 undef undef 5 min bool none
alarm
Collects various SQL Server statistics using SQL Server
global variables (for example, @@CPU_BUSY), then
calculates the change in the value of these global
variables between poll cycles. For more details, see the
online Help.
LocksColl Y std <0, >0 undef undef 15 min bool none
alarm
Collects information about all the locks that are within
SQL Server.

This collector uses the SQL Server Locks performance

counters to calculate the wait times and number of
requests for locks by database, table, extent, page, row
I.D., or key for instances of SQL Server 7.0 or higher. For
SQL Server 6.5, this collector uses the SQL Server 6.5
performance counters to calculate the number of locks for
extents, pages, and tables, and the total number of locks
for all objects.

PATROL Parameter Reference Manual 651

PATROL Parameter Reference Manual 652

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 10 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LogSpaceColl Y std <0, >0 undef undef 24 min bool none
alarm
Collects information about the amount of log space used
by the databases that PATROL for Microsoft SQL Server
is monitoring. This parameter makes calculations based
on DBCC SQLPERF (LOGSPACE) and takes into account
the autogrow settings. For more details, see the online
Help.
LongRunningTransColl Y std <0, >0 undef undef 10 min bool none
alarm
Monitors the oldest open transaction. Long-running
transactions are those transactions that are open for
longer than one poll cycle of this parameter (the default
poll cycle is 10 minutes). System Administrator or
Database Administrator privileges are required for
proper execution of this parameter.
MonProbUsers Y std <0, >0 undef undef 5 min, 30 sec bool none
alarm
Collects information about processes that are blocking
other processes (blocker processes) and processes that are
idle. To determine the amount of time configured for
blocker or idle processes, see KM Admin => User
Monitoring Admin. This parameter does not monitor
logins that you excluded from monitoring by using the
KM Admin => User Monitoring Admin => Exclude
Specific User menu command.
ObjectSizeColl Y std <0, >0 undef undef 4 hr bool none
alarm
Collects information about and monitors the size of
database objects, and creates and destroys the Objects
application instances.
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 11 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ProcedureCacheColl Y std <0, >0 undef undef 15 min bool none
alarm
Collects information about the SQL Server procedure
cache. To calculate the values for the procedure cache
consumer parameters, this parameter uses the SQL Server
- Procedure Cache performance object for SQL Server 6.5
and the SQL Server DBCC PROCCACHE command for
SQL Server 7.0 and 2000.
ProcessColl Y std <0, >0 undef undef 5 min bool none
alarm
Collects information about the status and number of
processes that are running on the SQL Server.
ReplicationColl Y std <0, >0 undef undef 10 min bool none

Collects information about transactions that are delivered

from the transaction log of the publication database to the
distribution database and transactions that are delivered
from the distribution database to the destination
database; gathers information about the servers that
subscribe to published articles; and it creates and
destroys the Published and Subscribers application
instances.
ResponseColl Y std <0, >0 undef undef 10 min bool none
alarm
Measures the amount of time it takes to connect to the
SQL Server, execute a simple query, and return a
response by executing and then monitoring the progress
of a sample SQL statement. For more information, see the
online Help.
SQLServerColl Y std <0, >0 undef undef 5 min bool none
alarm
Collects statistics about SQL Server performance.

PATROL Parameter Reference Manual 653

PATROL Parameter Reference Manual 654

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 12 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UserDefined CountersColl Y std <0, >0 undef undef 15 min bool none
alarm
Collects information from SQL Server User Defined
Counters for SQL Server 6.5 and from User Settable object
for SQL Server 7.0 and later.
Database Application Class
DatabaseSpaceUsedMB Y con undef undef undef set by coll graph database space used
in MB
Displays (in megabytes) the amount of used space (the
size of the database device or files minus the unallocated
space within the database).

Collector: DbSpaceColl
DatabaseSpaceUsedPct Y con <0, >100 85–95 95–100 set by coll graph percentage of
warn warn alarm database space used
Monitors the percentage of available space that is used
(the space used divided by the sum of the database size,
plus any free disk space for autogrow files or the maxsize
set).

Note: The values for this parameter do not match the

values provided by the Microsoft SQL Server Enterprise
Manager because the KM takes into account autogrow
settings and free disk space.

For SQL Server 6.5, the percentage of space that is used

by the log segment is included if the log segment does not
have its own device.

Collector: DbSpaceColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 13 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LogSpaceUsedMB Y con none undef undef set by coll graph transaction log space
used in MB
Displays (in megabytes) the amount of the transaction log
space that is used.

Collector: LogSpaceColl
LogSpaceUsedPct Y con <0, >100 70–80 80–100 set by coll graph percentage of
alarm warn alarm transaction log space
Displays the percentage of the transaction log that is used
used. For SQL Server 6.5, the transaction log must exist
on its own device for this parameter to operate.

Note: The values for this parameter do not match the

values that are provided by the Microsoft SQL Server
Enterprise Manager because the KM takes into account
autogrow settings and free disk space.

Collector: LogSpaceColl
LongRunningTrans Y con undef 1–1 undef set by coll bool none
alarm
Displays information about the oldest long running
transaction. Long running transactions are transactions
that are open for longer than one poll of the
LongRunningTransColl standard collector parameter.

Collector: LongRunningTransColl
Disk Application Class
BatchAverageSize Y con undef undef undef set by coll graph number of pages

Microsoft SQL Server 6.5 only.

Displays the average number of 2 KB pages that are

written to disk during a batch I/O operation.

Collector: SQLServerColl

PATROL Parameter Reference Manual 655

PATROL Parameter Reference Manual 656

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 14 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BatchMaxSize Y con undef undef undef set by coll graph number of pages

Microsoft SQL Server 6.5 only.

Displays the maximum number of 2 KB pages that are

written to disk during a batch I/O operation.

Collector: SQLServerColl
BatchWritesPerSec Y con undef undef undef set by coll graph number of pages

Microsoft SQL Server 6.5 only.

Displays the number of 2 KB pages that are written to

disk per second using batch I/O.

Collector: SQLServerColl
DiskIoErrors Y con <0, >0 undef undef set by coll graph number of disk I/O
alarm errors
Monitors the number of disk errors that SQL Server
encounters while reading and writing to disk. This value
represents the number of errors that occurred between
polls of the @@TOTAL_ERRORS global variable.

Collector: GlobalVarsColl
DiskIoReads Y con undef undef undef set by coll graph number of disk I/O
reads
Monitors the number of disk reads that SQL Server
performs between polls of the @@TOTAL_READ global
variable.

Collector: GlobalVarsColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 15 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DiskIoWrites Y con undef undef undef set by coll graph number of disk I/O
writes
Monitors the number of disk writes the SQL Server
performs between polls of the @@ TOTAL_WRITE global
variable.

Collector: GlobalVarsColl
LazyWritesPerSec Y con undef undef undef set by coll graph number of pages
flushed to disk per
Displays the number of pages that LazyWriter flushes to sec
disk per second. For SQL Server 6.5, the size of a page is 2
KB; for SQL Server 7.0, the size of a page is 8 KB.

Collector: SQLServerColl
LogWritesPerSec Y con undef undef undef set by coll graph number of pages
written to disk per
Microsoft SQL Server 6.5 only. sec

Displays the number of log pages that are physically

written to disk per second.

Collector: SQLServerColl
OutstandingReads Y con undef undef undef set by coll graph number of
outstanding reads
Displays the number of physical reads that are pending.

Collector: SQLServerColl
OutstandingWrites Y con undef undef undef set by coll graph number of
outstanding writes
Displays the number of physical writes that are pending.

Collector: SQLServerColl

PATROL Parameter Reference Manual 657

PATROL Parameter Reference Manual 658

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 16 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PhysicalReadsPerSec Y con undef undef undef set by coll graph number of physical
reads per sec
Microsoft SQL Server 6.5 only.

Displays the number of physical reads (each consisting of

eight 2 KB pages) that Read Ahead Manager issues per
second. This number indicates how busy read ahead is in
terms of actual physical I/O.

Collector: SQLServerColl
SinglePageWritesPerSec Y con undef undef undef set by coll graph number of page
writes per sec
Microsoft SQL Server 6.5 only.

Displays the number of single page writes that logging

and cache flushes perform per second.

Collector: SQLServerColl
TransPerLogRecord Y con undef undef undef set by coll graph number of
transactions per log
Microsoft SQL Server 6.5 only. record

Displays the number of transactions that were packed

into a log record before the log record was written to disk.

Collector: SQLServerColl
File Application Class
FileSizeMB Y con undef undef undef set by coll graph size of file in MB

Microsoft SQL Server 7.0 and later only.

Displays (in megabytes) the size of the database file. This

value is obtained from the sysfiles table.

Collector: DbSpaceColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 17 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SpaceUsedMB Y con undef undef undef set by coll graph used space in MB

Microsoft SQL Server 7.0 and later only.

Displays (in megabytes) the amount of file space that is

used by the database file.

Collector: DbSpaceColl
SpaceUsedPCT Y con undef 80–90 90–100 set by coll graph percentage of file
warn alarm space used
Microsoft SQL Server 7.0 and later only.

Displays the percentage of the database file that is full.

When this value is calculated, account autogrow settings
and free disk space are taken into account.

Collector: DbSpaceColl
Filegroup Application Class
SpaceUsedMB Y con undef undef undef set by coll graph used file group space
in MB
Microsoft SQL Server 7.0 and later only.

Displays (in megabytes) the amount of the file group

space that is used.

Collector: DbSpaceColl
SpaceUsedPCT Y con undef 80–90 90–100 set by coll graph percentage of space
warn alarm used
Microsoft SQL Server 7.0 and later only.

Displays the percentage of the database file group that is

full. When this value is calculated, autogrow settings and
free disk space are taken into account.

Collector: DbSpaceColl

PATROL Parameter Reference Manual 659

PATROL Parameter Reference Manual 660

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 18 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Locks Application Class
DatabaseLockAvgWaitTime Y con undef undef undef set by coll graph wait time in msec

Microsoft SQL Server 7.0 and later only.

Displays (in milliseconds) the average amount of wait

time caused by database lock requests. To calculate this
value, PATROL uses the SQL Server Lock Waits/sec and
Average Wait Time (msec) performance counters for the
database instance.

Collector: LocksColl
DatabaseLockRequestsPerSec Y con undef undef undef set by coll graph number of lock
requests per sec
Microsoft SQL Server 7.0 and later only.

Displays the number of new database locks and lock

conversions that lock manager requested per second. To
calculate this value, PATROL uses the Lock Requests/sec
performance counter for the database instance.

Collector: LocksColl
DatabaseLockRequestWaitPercent Y con undef undef undef set by coll graph percentage of
database locks per
Microsoft SQL Server 7.0 and later only. sec that had to wait

Displays the percentage of database lock requests that

required a caller to wait. To calculate this value, PATROL
uses the Lock Requests/sec and Lock Waits/sec
performance counters for the database instance.

Collector: LocksColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 19 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ExtentLockAvgWaitTime Y con undef undef undef set by coll graph wait time in msec

Microsoft SQL Server 7.0 and later only.

Displays (in milliseconds) the average amount of wait

time that was caused by extent lock requests. To calculate
this value, PATROL uses the SQL Server Lock Waits/sec
and Average Wait Time (msec) performance counters for
the extent instance.

Collector: LocksColl
ExtentLockRequestsPerSec Y con undef undef undef set by coll graph number of lock
requests per sec
Microsoft SQL Server 7.0 and later only.

Displays the number of new extent locks and lock

conversions that the lock manager requested per second.
To calculate this value, PATROL uses the SQL Server
Lock Requests/sec performance counter for the extent
instance.

Collector: LocksColl
ExtentLockRequestWaitPercent Y con undef undef undef set by coll graph percentage of new
extent lock requests
Microsoft SQL Server 7.0 and later only. that had to wait

Displays the percentage of new extent lock requests per

second that required a caller to wait. To calculate this
value, PATROL uses the SQL Server Lock Waits/sec and
Lock Requests/sec performance counters for the extent
instance.

Collector: LocksColl

PATROL Parameter Reference Manual 661

PATROL Parameter Reference Manual 662

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 20 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ExtentLocksExclusive Y con undef undef undef set by coll graph number of exclusive
extent locks
Microsoft SQL Server 6.5 only.

Displays the number of extent locks that are exclusive. To

calculate this value, PATROL uses the SQL Server Extent
Locks - Exclusive performance counter for the extent
instance.

Collector: LocksColl
ExtentLocksNext Y con undef undef undef set by coll graph number of next
extent locks
Microsoft SQL Server 6.5 only.

Displays the number of next extent locks. To calculate this

value, PATROL uses the SQL Server 6.5 Extent Locks -
Next performance counter for the extent instance.

Collector: LocksColl
ExtentLocksPrevious Y con undef undef undef set by coll graph number of previous
extent locks
Microsoft SQL Server 6.5 only.

Displays the number of previous extent locks. To

calculate this value, PATROL uses the SQL Server 6.5
Extent Locks - Next performance counter for the extent
instance.

Collector: LocksColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 21 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ExtentLocksShared Y con undef undef undef set by coll graph number of shared
extent locks
Microsoft SQL Server 6.5 only.

Displays the number of extent locks that are shared. To

calculate this value, PATROL uses the SQL Server 6.5
Extent Locks - Shared performance counter for the extent
instance.

Collector: LocksColl
ExtentLocksTotal Y con undef undef undef set by coll graph number of total
extent locks
Microsoft SQL Server 6.5 only.

Displays the number of all extent locks. To calculate this

value, PATROL uses the SQL Server 6.5 Extent Locks -
Total performance counter for the extent instance.

Collector: LocksColl
ExtentLocksUpdate Y con undef undef undef set by coll graph number of update
extent locks
Microsoft SQL Server 6.5 only.

Displays the number of update extent locks. To calculate

this value, PATROL uses the SQL Server 6.5 Extent Locks
- Update performance counter for the extent instance.

Collector: LocksColl

PATROL Parameter Reference Manual 663

PATROL Parameter Reference Manual 664

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 22 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
IntentLocksExclusive Y con undef undef undef set by coll graph number of exclusive
extent locks
Microsoft SQL Server 6.5 only.

Displays the number of intent locks that are exclusive. To

calculate this value, PATROL uses the SQL Server 6.5
Intent Locks - Exclusive performance counter.

Collector: LocksColl
IntentLocksShared Y con undef undef undef set by coll graph number of shared
intent locks
Microsoft SQL Server 6.5 only.

Displays the number of intent locks that are shared. To

calculate this value, PATROL uses the SQL Server 6.5
Intent Locks - Shared performance counter.

Collector: LocksColl
IntentLocksTotal Y con undef undef undef set by coll graph number of total
intent locks
Microsoft SQL Server 6.5 only.

Displays the total number of intent locks. To calculate this

value, PATROL uses the SQL Server 6.5 Intent Locks -
Total performance counter.

Collector: LocksColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 23 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
KeyLockAvgWaitTime Y con undef undef undef set by coll graph wait time in msec

Microsoft SQL Server 7.0 and later only.

Displays (in milliseconds) the average amount of wait

time that was caused by key lock requests. To calculate
this value, PATROL uses the SQL Server Lock Waits/sec
and Average Wait Time (msec) performance counters for
the key instance.

Collector: LocksColl
KeyLockRequestsPerSec Y con undef undef undef set by coll graph number of new lock
requests per sec
Microsoft SQL Server 7.0 and later only.

Displays the number of new key locks and lock

conversions that the lock manager requested per second.
To calculate this value, PATROL uses the SQL Server
Lock Requests/sec performance counter for the key
instance.

Collector: LocksColl
KeyLockRequestWaitPercent Y con undef undef undef set by coll graph percentage of key
lock requests per sec
Microsoft SQL Server 7.0 and later only. that had to wait

Displays the percentage of key lock requests that required

a caller to wait. To calculate this value, PATROL uses the
SQL Server Lock Waits/sec and Lock Requests/sec
performance counters for the key instance.

Collector: LocksColl

PATROL Parameter Reference Manual 665

PATROL Parameter Reference Manual 666

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 24 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LockRequestsPerSec Y con undef undef undef set by coll graph number of lock
requests per sec
Microsoft SQL Server 7.0 and later only.

Displays the number of all locks and lock conversions

that the lock manager requested per second. To calculate
this value, PATROL uses the SQL Server Lock Requests/
sec performance counter.

Collector: LocksColl
LockRequestWaitPercent Y con undef undef undef set by coll graph percentage of lock
requests per sec that
Microsoft SQL Server 7.0 and later only. had to wait

Displays the percentage of all lock requests that required

a caller to wait. To calculate this value, PATROL uses the
SQL Server Lock Waits/sec and Lock Requests/sec
performance counters.

Collector: LocksColl
PageLockAvgWaitTime Y con undef undef undef set by coll graph wait time in msec

Microsoft SQL Server 7.0 and later only.

Displays (in milliseconds) the average amount of wait

time that was caused by page lock requests. To calculate
this value, PATROL uses the SQL Server Lock Waits/sec
and Average Wait Time (msec) performance counters for
the page instance.

Collector: LocksColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 25 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PageLockRequestsPerSec Y con undef undef undef set by coll graph number of new page
lock requests per sec
Microsoft SQL Server 7.0 and later only.

Displays the number of new page locks and lock

conversions that the lock manager requested per second.
To calculate this value, PATROL uses the SQL Server
Lock Requests/sec performance counter for the page
instance.

Collector: LocksColl
PageLockRequestWaitPercent Y con undef undef undef set by coll graph percentage of lock
requests per sec that
Microsoft SQL Server 7.0 and later only. had to wait

Displays the percentage of page lock requests that

required a caller to wait. To calculate this value, PATROL
uses the SQL Server Lock Waits/sec and Lock Requests/
sec performance counters for the page instance.

Collector: LocksColl
PageLocksExclusive Y con undef undef undef set by coll graph number of exclusive
page locks
Microsoft SQL Server 6.5 only.

Displays the number of page locks that are exclusive. To

calculate this value, PATROL uses the SQL Server 6.5
Page Locks - Exclusive performance counter.

Collector: LocksColl

PATROL Parameter Reference Manual 667

PATROL Parameter Reference Manual 668

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 26 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PageLocksShared Y con undef undef undef set by coll graph number of shared
page locks
Microsoft SQL Server 6.5 only.

Displays the number of page locks that are shared. To

calculate this value, PATROL uses the SQL Server 6.5
Page Locks - Shared performance counter.

Collector: LocksColl
PageLocksTotal Y con undef undef undef set by coll graph number of page locks

Microsoft SQL Server 6.5 only.

Displays the total number of page locks. To calculate this

value, PATROL uses the SQL Server 6.5 Page Locks -
Total performance counter.

Collector: LocksColl
PageLocksUpdate Y con undef undef undef set by coll graph number of update
page locks
Microsoft SQL Server 6.5 only.

Displays the number of update page locks. To calculate

this value, PATROL uses the SQL Server 6.5 Page Locks -
Update performance counter.

Collector: LocksColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 27 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
RIDLockAvgWaitTime Y con undef undef undef set by coll graph wait time in msec

Microsoft SQL Server 7.0 and later only.

Displays (in milliseconds) the average amount of wait

time that was caused by row ID lock requests. To
calculate this value, PATROL uses the SQL Server Locks
Waits/sec and Average Wait Time (msec) performance
counters.

Collector: LocksColl
RIDLockRequestsPerSec Y con undef undef undef set by coll graph number of row ID
lock requests per sec
Microsoft SQL Server 7.0 and later only.

Displays the number of new row ID locks and lock

conversions that the lock manager requested per second.
To calculate this value, PATROL uses the SQL Server
Locks Requests/sec performance counter.

Collector: LocksColl
RIDLockRequestWaitPercent Y con undef undef undef set by coll graph percentage of row ID
lock requests per sec
Microsoft SQL Server 7.0 and later only. that had to wait

Displays the percentage of row ID lock requests that

required a caller to wait. To calculate this value, PATROL
uses the SQL Server Locks Waits/sec and Lock Requests/
sec performance counters.

Collector: LocksColl

PATROL Parameter Reference Manual 669

PATROL Parameter Reference Manual 670

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 28 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TableLockAvgWaitTime Y con undef undef undef set by coll graph wait time in msec

Microsoft SQL Server 7.0 and later only.

Displays (in milliseconds) the average amount of wait

time that was caused by table lock requests. To calculate
this value, PATROL uses the SQL Server Locks Waits/sec
and Average Wait Time (msec) performance counters.

Collector: LocksColl
TableLockRequestsPerSec Y con undef undef undef set by coll graph number of new table
lock requests per sec
Microsoft SQL Server 7.0 and later only.

Displays the number of new table locks and lock

conversions that the lock manager requested per second.
To calculate this value, PATROL uses the SQL Server
Lock Requests/sec performance counter.

Collector: LocksColl
TableLockRequestWaitPercent Y con undef undef undef set by coll graph percentage of
requests per sec that
Microsoft SQL Server 7.0 and later only. had to wait

Displays the percentage of table lock requests that

required a caller to wait. To calculate this value, PATROL
uses the SQL Server Lock Waits/sec and Lock Requests/
secperformance counters.

Collector: LocksColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 29 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TableLocksExclusive Y con undef undef undef set by coll graph number of exclusive
table locks
Microsoft SQL Server 6.5 only.

Displays the number of table locks that are exclusive. To

calculate this value, PATROL uses the SQL Server 6.5
Table Locks - Exclusive performance counter.

Collector: LocksColl
TableLocksShared Y con undef undef undef set by coll graph number of shared
table locks
Microsoft SQL Server 6.5 only.

Displays the number of table locks that are shared. To

calculate this value, PATROL uses the SQL Server 6.5
Table Locks - Shared performance counter.

Collector: LocksColl
TableLocksTotal Y con undef undef undef set by coll graph number of table locks

Microsoft SQL Server 6.5 only.

Displays the total number of table locks. To calculate this

value, PATROL uses the SQL Server 6.5 Table Locks -
Total performance counter.

Collector: LocksColl

PATROL Parameter Reference Manual 671

PATROL Parameter Reference Manual 672

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 30 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TotalBlockingLocks Y con undef undef undef set by coll graph number of blocking
locks
Microsoft SQL Server 6.5 only.

Displays the total number of locks that are blocking other

processes. To calculate the value of this parameter,
PATROL uses the SQL Server 6.5 Total Blocking Locks
performance counter.

Collector: LocksColl
TotalExclusiveLocks Y con undef undef undef set by coll graph number of exclusive
locks
Microsoft SQL Server 6.5 only.

Displays the total number of locks that are all exclusive.

To calculate the value of this parameter, PATROL uses
the SQL Server 6.5 Total Exclusive Locks performance
counter.

Collector: LocksColl
TotalLocks Y con undef undef undef set by coll graph number of used locks

Microsoft SQL Server 6.5 only.

Displays the total number of locks that SQL Server is

using. To calculate the value of this parameter, PATROL
uses the SQL Server 6.5 Total Locks performance counter.

Collector: LocksColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 31 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TotalSharedLocks Y con undef undef undef set by coll graph number of shared
locks
Microsoft SQL Server 6.5 only.

Displays the total number of locks that are shared. To

calculate the value of this parameter, PATROL uses the
SQL Server 6.5 Total Shared Locks performance counter.

Collector: LocksColl
Network Application Class
CommandQueueLength Y con <0, >1000 5–100 100–1000 set by coll graph number of client
alarm warn alarm requests waiting
Microsoft SQL Server 6.5 only.

Displays the number of client requests that are waiting

for worker threads from SQL Server.

Collector: SQLServerColl
NetReadsPerSec Y con undef undef undef set by coll graph number of packets
read per sec
Microsoft SQL Server 6.5 only.

Displays the number of tabular data stream (TDS) packets

that are read from the network per second. TDS is the
protocol that SQL Server uses to communicate with a
client.

Collector: SQLServerColl

PATROL Parameter Reference Manual 673

PATROL Parameter Reference Manual 674

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 32 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
NetWritesPerSec Y con undef undef undef set by coll graph number of packets
written per sec
Microsoft SQL Server 6.5 only.

Displays the number of tabular data stream (TDS) packets

that are written to the network per second. TDS is the
protocol that SQL Server uses to communicate with a
client.

Collector: SQLServerColl
PacketErrors Y con <0, >99 undef undef set by coll graph number of packet
alarm errors
Monitors the number of packet errors that SQL Server
encounters while reading and writing network packets.
This value represents the number of errors that occur
between polls of the @@PACKET_ERRORS global
variable.

Collector: GlobalVarsColl
PacketsReceivd Y con undef undef undef set by coll graph number of packets
received
Monitors the number of network packets that SQL Server
receives during the between polls of the
@@PACK_RECEIVED global variable.

Collector: GlobalVarsColl
PacketsSent Y con undef undef undef set by coll graph number of packets
sent
Monitors the number of network packets that SQL Server
sends between polls of the @@PACK_SENT global
variable.

Collector: GlobalVarsColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 33 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Object Application Class
ObjectDataSizeMB Y con undef undef undef set by coll graph space used by data in
MB
Displays (in megabytes) the total amount of space that is
used by data in the table or index which you are
monitoring.

Collector: ObjectSizeColl
ObjectReservedSizeMB Y con undef undef undef set by coll graph space used in MB

Displays (in megabytes) the total amount of space that is

reserved for use by the table or index which you are
monitoring, including space for data and system
information and space not used.

Collector: ObjectSizeColl
RowCountEstimate Y con undef undef undef set by coll graph number of rows in
table
Provides an estimate of the number of rows in the table.
This parameter is not available when the monitored
object is an index.

Collector: ObjectSizeColl

PATROL Parameter Reference Manual 675

PATROL Parameter Reference Manual 676

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 34 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Performance Application Class
CacheHitRatio Y con <0, >100 0–50 50–70 set by coll graph percentage of time a
alarm alarm warn request is found in
Displays the percentage of requests for data that the SQL cache
Server can satisfy from memory (data cache) rather than
reading the data from a disk. To calculate this value,
PATROL uses the SQL Server => Cache Hit Ratio
performance counter for SQL Server 6.5 and the SQL
Server:Buffer Manager => Buffer Cache Hit Ratio
performance counter for SQL Server 7.0. For
recommendations, see the online Help.

Collector: SQLServerColl
CpuBusy Y con <0, >100 90–95 95–100 set by coll graph percentage of time
alarm warn alarm the SQL server was
Monitors the percentage of time that SQL Server is busy busy
between polls of the @@CPU_BUSY global variable.

Collector: GlobalVarsColl
CpuIdle Y con <0, >100 0–5 6–10 set by coll graph percentage of time
alarm alarm warn the SQL server was
Monitors the percentage of time that SQL Server is idle idle
between polls of the @@IDLE global variable.

Collector: GlobalVarsColl
CpuIoBusy Y con <0, >100 30–40 40–100 set by coll graph percentage of time
alarm warn alarm the SQL server
Monitors the percentage of time that SQL Server performed I/O
performs input and output operations between polls of operations
the @@IO_BUSY global variable.

Collector: GlobalVarsColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 35 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ResponseExecTime Y con undef undef undef set by coll graph operating response
time in msec
Provides the total operating response time (in
milliseconds). The value of this parameter includes the
time it takes a sample SQL statement to connect to SQL
Server, execute a simple query, and return a response. See
ResponseColl for information on how to change the
sample SQL statement.

Collector: ResponseColl
ResponseSqlTime Y con undef undef undef set by coll graph SQL response time in
msec
Provides the amount of time (in milliseconds) that it takes
SQL Server to execute a simple query when a sample SQL
statement is executed. This parameter is formed by
subtracting the connect and disconnect times from the
information gathered by ResponseColl, leaving only the
amount of time that the SQL Server took to execute the
query.

Collector: ResponseColl
TransactionsPerSec Y con undef undef undef set by coll graph number of tsql
batches executed per
Displays the number of Transact-SQL command batches sec
that are executed per second. This number is affected by
all constraints, such as, I/O, number of users, cache size,
and complexity of the requests. PATROL uses the SQL
Statistics => Bath Requests/sec performance counter to
calculate the value of this parameter.

Collector: SQLServerColl

PATROL Parameter Reference Manual 677

PATROL Parameter Reference Manual 678

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 36 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
Procedure Cache Application Class
PCProcBuffersActivePct Y con <0, >100 undef undef set by coll graph percentage of buffers
OK actively used
Monitors the percentage of procedure buffers that are
actively used. To calculate this value, PATROL uses the
SQL Server - Procedure Cache performance object for
SQL Server 6.5 and the DBCC PROCCACHE command
for SQL Server 7.0 and 2000.

Collector: ProcedureCacheColl
PCProcBuffersUsedPct Y con <0, >100 undef undef set by coll graph percentage of buffers
OK used
Monitors the percentage of procedure buffers in the
procedure cache that are used. To calculate this value,
PATROL uses the SQL Server - Procedure Cache
performance object for SQL Server 6.5 and the DBCC
PROCCACHE command for SQL Server 7.0 and 2000.

Collector: ProcedureCacheColl
PCProcCacheActivePct Y con <0, >100 undef undef set by coll graph percentage of active
OK cache
Monitors the percentage of procedure cache that is active.
To calculate this value, PATROL uses the SQL Server -
Procedure Cache performance object for SQL Server 6.5
and the DBCC PROCCACHE command for SQL Server
7.0 and 2000.

Collector: ProcedureCacheColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 37 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PCProcCacheUsedPct Y con <0, >100 undef undef set by coll graph percentage of used
OK cache
Monitors the percentage of procedure cache that is used.
To calculate this value, PATROL uses the SQL Server -
Procedure Cache performance object for SQL Server 6.5
and the DBCC PROCCACHE command for SQL Server
7.0 and 2000.

Collector: ProcedureCacheColl
Published Application Class
ReplicatedCmdsPerSec Y con undef undef undef set by coll graph number of
commands per sec
Microsoft SQL Server 7.0 and later only.

Displays the number of replication commands that have

been read out of the transaction log of the publication
database and delivered to the distribution database per
second.

Collector: ReplicationColl
ReplicatedTrans Y con undef undef undef set by coll graph number of replicated
transactions not yet
Microsoft SQL Server 6.5 only. delivered

Displays the number of transactions in the transaction log

of the publication database that are marked for
distribution but have not yet been delivered to the
distribution database.

Collector: ReplicationColl

PATROL Parameter Reference Manual 679

PATROL Parameter Reference Manual 680

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 38 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ReplicatedTransPerSec Y con undef undef undef set by coll graph number of replicated
transactions read per
Displays the number of transactions that were read out of sec
the transaction log for the publication database and
delivered to the distribution database per second.

Collector: ReplicationColl
ReplicationLatency Y con undef undef undef set by coll graph msec

Microsoft SQL Server 6.5 only.

Displays the number of milliseconds between the time

that a transaction marked for replication is entered into
the transaction log of the publication database and it is
read out of the log and delivered to the distribution
database.

Collector: ReplicationColl
Subscribers Application Class
DeliveredCmdsPerSec Y con undef undef undef set by coll graph number of delivered
commands per sec
Microsoft SQL Server 7.0 and later only.

Displays the number of delivered commands per second

in the distribution database. This value is calculated by
using the Delivered Cmds/sec performance counter
under the SQLServer:Replication Dist. object.

Collector: ReplicationColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 39 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DeliveredTrans Y con undef undef undef set by coll graph number of delivered
transactions
Microsoft SQL Server 6.5 only.

Displays the number of delivered transactions in the

distribution database.

Collector: ReplicationColl
DeliveredTransPerSec Y con undef undef undef set by coll graph number of
transactions
Displays the number of transactions delivered per delivered per sec
second.

Collector: ReplicationColl
DeliveryLatency Y con undef undef undef set by coll graph number of msec
transactions remain
Displays the number of milliseconds that a transaction in distribution
remains in the distribution database before it is delivered database
to the subscription server.

Collector: ReplicationColl
UnDeliveredTrans Y con undef undef undef set by coll graph number of
undelivered
Microsoft SQL Server 6.5 only. transactions

Provides the number of undelivered transactions in the

distribution database.

Collector: ReplicationColl

PATROL Parameter Reference Manual 681

PATROL Parameter Reference Manual 682

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 40 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
User–Defined Counters Application Class
UserDefCounter1–10 Y con undef undef undef set by coll graph number of CPU
machine ticks
Displays the user defined Windows NT performance
counters 1 through 10 that SQL Server sets.

Collector: UserDefined CountersColl

Users Application Class
UserBlocked Y con undef 1–1 2–2 set by coll none none
warn alarm
Gives a warning if one user process is blocked longer
than the blocked detection time. Goes into alarm when
two or more user processes are blocked longer than the
blocked detection time. Change the blocked detection
time for all SQL Server user processes by using the KM
Admin => User Monitoring Admin => Configure Auto
User Monitoring menu command.Change the blocked
detection time for the selected user process through the
Change Local Defaults menu command.

Collector: UserColl
UserColl Y std undef undef undef 10 min bool none

Collects data for the Users application class; sets all

values for user and process parameters within the class.
UserCpu Y con undef undef undef set by coll graph number of CPU
machine ticks
Displays the CPU time that a user connection and
checkpoint process used since the last poll of the UserColl
parameter.

Collector: UserColl
Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 41 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UserIdle Y con undef 1–1 undef set by coll none none
warn
Generates a warning if one user process remains idle
longer than the idle detection time.

Change the idle detection time for all SQL Server user
processes by using the KM Admin => User Monitoring
Admin => Configure Auto User Monitoring menu
command under a Server application. Change the idle
detection time for the selected user process by using the
Change Local Defaults menu command under a User
application.

Collector: UserColl
UserIo Y con undef undef undef set by coll graph number of disk reads
and writes
Displays the number of disk reads and writes for the user
connection being monitored.

Collector: UserColl
UserMemUsage Y con undef undef undef set by coll graph number of pages of
allocated memory
Displays the amount of memory (in 2 KB pages for SQL
Server 6.5; in 8 KB pages in SQL Server 7.0 and later)
allocated to a user connection.

Collector: UserColl

PATROL Parameter Reference Manual 683

PATROL Parameter Reference Manual 684

Table 22 PATROL for Microsoft SQL Server 4.1.20 (Part 42 of 42)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UserTotCpu Y con undef undef undef set by coll graph CPU machine ticks

Displays the cumulative CPU time for a user connection

and checkpoint process.

Collector: UserColl
UserTotIo Y con undef undef undef set by coll graph disk reads and writes

Displays the cumulative total number of disk reads and

writes for the current statement.

Collector: UserColl
PATROL for Microsoft Windows Servers 3.0.03

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 1 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PATROL Knowledge Module for Microsoft Windows Active Directory 1.5.01
AD_AD_ADDRESS_BOOK Application Class
AdAbAnrRate Y con undef undef undef NA graph operations per sec

Reports the rate at which the Active Directory server is

receiving ambiguous name resolution requests as a result
of Address Book activity.

Collector: AdPerfCollector
AdAbBrowseRate Y con undef undef undef NA graph operations per sec

Reports the rate at which the Active Directory server is

receiving Address Book browse requests.

Collector: AdPerfCollector
AdAbClientSessions Y con undef undef undef NA graph operations per sec

Reports the number of active Address Book client

sessions on the Active Directory server.

Collector: AdPerfCollector
AdAbMatchRate Y con undef undef undef NA graph operations per sec

Reports the rate at which Address Book matches are

occurring on the Active Directory server.

Collector: AdPerfCollector

PATROL Parameter Reference Manual 685

PATROL Parameter Reference Manual 686

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 2 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdAbPropertyReadRate Y con undef undef undef NA graph operations per sec

Collector: Reports the rate at which Address Book

property read operations are occurring on the Active
Directory server.
Collector: AdPerfCollector
AdAbProxyLookupRate Y con undef undef undef NA graph operations per sec

Reports the rate at which Address Book proxy lookup

operations are occurring on the Active Directory server.

Collector: AdPerfCollector
AdAbSearchRate Y con undef undef undef NA graph operations per sec

Reports the rate at which Address Book search operations

are occurring on the Active Directory server.

Collector: AdPerfCollector
AD_AD_COLLECTOR Application Class
AdCollector Y coll NA NA NA NA bool NA

Collects and refreshes cached information about the

domain controller that is required for the other collector
parameters to collect successfully. This parameter does
not populate any parameter values.
AdDiskCollector Y std undef 1–1 undef 30 min bool 0 - successful
alarm collection
Collects the parameter information for the parameters 1 - failed collection

■ AdDiskSpaceUsed
■ AdDiskSpaceAvailable parameters.
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 3 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdFsmoCollector Y std undef 1–1 undef 15 min bool 0 - successful
alarm collection
Collects data from FSMO-related parameters 1 - failed collection

■ AdFsConnectivity
■ AdFsRoleChanged
AdPerfCollector Y std undef 1–1 undef 10 min bool 0 - successful
alarm collection
Collects performance-related data for the following 1 - failed collection
parameters and application classes:

■ AdServerNameTransRate
■ AdThreadsInUse
■ AdClientNameTransRate
■ AdWriteRate
■ AdSearchRate
■ AdReadRate
■ AD_AD_ADDRESS_BOOK
■ AD_AD_LDAP
■ AD_AD_REPLICATION
■ AD_AD_SAM
AdReplicationCollector Y std undef 1–1 undef 15 min bool 0 - successful
alarm collection
Collects replication status and latency for the following 1 - failed collection
parameters:

■ AdIntersiteReplicationStatus
■ AdIntrasiteReplicationLatency
■ AdIntrasiteReplicationStatus

PATROL Parameter Reference Manual 687

PATROL Parameter Reference Manual 688

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 4 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AD_AD_FSMO_ROLE_CONNECTIVITY Application Class
AdFsConnectivity Y std undef 1–1 undef ICMP-15 min graph 0 - successful
alarm LDAP collection
Reports whether the domain controller that holds the connection to: 1 - failed collection
schema master role is allowing LDAP connections. The Schema Master
operations master role server is pinged frequently to -12 hr
determine network availability. Attempts to connect Domain
through LDAP are not performed as often because LDAP Naming Master
connections use a greater amount of server resources. - 12 hr
Relative ID
Configure the frequency of the LDAP connection test by Master - 1 hr
changing the value of the agent configuration variable Infrastructure
ConnStatusSched. The default value for each FSMO role Master - 1 hr
is stored in the configuration database. PDC Emulator -
1 hr
LDAP
connections are
also polled
when a role
change has
been detected.
AdFsRoleChanged Y std undef 1–2 undef 30 min graph 0 - role unchanged
warn 1 - role changed
Detects and reports when a master operations FSMO role 2 - role acquired
is moved to or from the current DC and when the current
DC acquires the role.
AD_AD_FSMO_ROLE_CONNECTIVITY_CONT Application Class
The AD_AD_FSMO_ROLE_CONNECTIVITY_CONT application class is the parent container for all the AD_AD_FSMO_ROLE_CONNECTIVITY application class instances. The single
instance is named FSMO Connectivity.
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 5 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AD_AD_LDAP Application Class
AdLdActiveThreads N con undef undef undef NA graph number of threads

Reports the current number of threads in use by the

LDAP subsystem of the local directory service.

Collector: AdPerfCollector
AdLdBindRate N con undef undef undef NA graph operations per sec

Reports the number of successful LDAP binds. If the

parameter is in alarm, an annotated data point provides
the reason that LDAP cannot be connected.

Collector: AdPerfCollector
AdLdClientSessions N con undef undef undef NA graph number of sessions

Reports the number of currently connected LDAP client

sessions.

Collector: AdPerfCollector
AdLdConnectStatus Y con undef 1–1 undef NA graph 0 - able to connect
alarm 1 - unable to connect
Reports whether or not an LDAP connection is available.
If the parameter is in alarm, the parameter provides the
reason that LDAP cannot be connected.

Collector: AdPerfCollector
AdLdPercentSearches N con undef undef undef NA graph percentage of
directory searches
Reports the percentage of directory searches coming from
LDAP.

Collector: AdPerfCollector

PATROL Parameter Reference Manual 689

PATROL Parameter Reference Manual 690

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 6 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdLdPercentWrites N con undef undef undef NA graph percentage of
directory writes
Reports the percentage of directory writes coming from
LDAP.

Collector: AdPerfCollector
AdLdResponseTime Y con 0–5000 undef undef NA graph msec
WARNING
Reports the amount of time required to issue an LDAP (after two
bind operation. The bind operation is performed locally consecutive
on the domain controller to eliminate network latency. values that are
out of range)
Note: If the bind operation fails, a data point is not
reported for that collection cycle.

Collector: AdPerfCollector
AdLdSearchRate N con undef undef undef NA graph operations per sec

Reports the rate at which LDAP clients perform search

operations.

Collector: AdPerfCollector
AdLdWriteRate N con undef undef undef NA graph operations per sec

Reports the rate at which LDAP clients perform write

operations.

Collector: AdPerfCollector
AD_AD_REPLICATION Application Class
AdRpFailedSyncRequests Y con undef undef undef NA graph number of requests

Reports the number of unsuccessful synchronization

requests processed since the last collection cycle.

Collector: AdPerfCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 7 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdRpInboundByteRate N con undef undef undef NA graph bytes per sec

Reports the rate at which bytes of data are arriving at the

Active Directory server.

Collector: AdPerfCollector
AdRpInboundObjectRate N con undef undef undef NA graph objects per sec

Reports the rate at which objects are arriving that need to

be added to the current Active Directory Server.

Collector: AdPerfCollector
AdRpInboundPropertyRate N con undef undef undef NA graph properties per sec

Reports the rate at which property changes are arriving at

the Active Directory server.

Collector: AdPerfCollector
AdRpInboundValueRate N con undef undef undef NA graph values per sec

Reports the rate at which values are arriving at the Active

Directory server.

Collector: AdPerfCollector
AdRpOutboundByteRate N con undef undef undef NA graph bytes per sec

Reports the rate at which bytes of data are leaving the

Active Directory server.

Collector: AdPerfCollector

PATROL Parameter Reference Manual 691

PATROL Parameter Reference Manual 692

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 8 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdRpOutboundObjectRate N con undef undef undef NA graph objects per sec

Reports the rate at which objects that need to be added to

other Active Directory servers have left the current Active
Directory server since the last collection cycle.

Collector: AdPerfCollector
AdRpOutboundPropertyRate N con undef undef undef NA graph properties per sec

Reports the rate at which property changes have left the

Active Directory server since the last collection cycle.

Collector: AdPerfCollector
AdRpOutboundValueRate N con undef undef undef NA graph values per sec

Reports the rate at which values are leaving the Active

Directory server.

Collector: AdPerfCollector
AdRpPendingSyncRepl Y con undef undef undef NA graph number of requests

Reports the number of directory synchronizations that

are queued for this server but have not yet been
processed.

Collector: AdPerfCollector
AdRpSuccessSyncRequests Y con undef undef undef NA graph number of requests

Reports the number of synchronization requests that

were successfully processed since the last collection cycle.

Collector: AdPerfCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 9 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdRpSyncRequests Y con undef undef undef NA graph number of requests

Reports the number of synchronization requests

processed since the last collection cycle.

Collector: AdPerfCollector
AD_AD_SAM Application Class
AdSmCreateObjAttemptRate Y con undef undef undef NA graph operations per sec

Reports the number of Security Account Manager (SAM)

create-user and create-machine attempts per second since
the last collection cycle.

Collector: AdPerfCollector
AdSmCreateObjFailureRate Y con undef undef undef NA graph operations per sec

Reports the number of failed Security Account Manager

(SAM) create-user and create-machine attempts per
second since the last collection cycle.

Collector: AdPerfCollector
AdSmCreateObjSuccessRate Y con undef undef undef NA graph operations per sec

Reports the number of successful Security Account

Manager (SAM) create-user and create-machine attempts
per second since the last collection cycle.

Collector: AdPerfCollector

PATROL Parameter Reference Manual 693

PATROL Parameter Reference Manual 694

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 10 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdSmEvaluationRate Y con undef undef undef NA graph operations per sec

Reports the rate that the Active Directory server has

received SAM-initiated group evaluations since the last
collection cycle. This value is an aggregate of the
following performance counters:

■ SAM Account Group Membership Evaluations per

second
■ SAM GC Evaluations per second
■ SAM non-Transitive Membership Evaluations per
second
■ SAM Resource Group Membership Evaluations per
second
■ SAM Transitive Membership Evaluations per second
■ SAM Universal Group Membership Evaluations per
second
Collector: AdPerfCollector
AdSmPercentReads Y con undef undef undef NA graph percent

Reports the percentage of directory-read operations

initiated from the Security Account Manager (SAM).

Collector: AdPerfCollector
AdSmPercentSearches Y con undef undef undef NA graph percent

Reports the percentage of directory searches initiated

from the Security Account Manager (SAM).

Collector: AdPerfCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 11 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdSmPercentWrites Y con undef undef undef NA graph percent

Reports the percentage of directory-write operations

initiated from the Security Account Manager (SAM).

Collector: AdPerfCollector
AdSmQueryRate Y con undef undef undef NA graph operations per sec

Reports the number of display-information query

operations plus the number of enumerations that are
occurring on the Active Directory server. This value is an
aggregate of the following performance counters:

■ SAM Display Information Queries per second

■ SAM Enumerations per second
Collector: AdPerfCollector
AD_AD_SERVER Application Class
AdClientNameTransRate N con undef undef undef NA graph operations per sec

Reports the number of Active Directory client name

translations issued against the Active Directory server
since the last collection cycle.

Collector: AdPerfCollector
AdCollector Y coll NA NA NA 15 min bool NA

Collects and refreshes cached information about the

domain controller that is required for the other collector
parameters to collect successfully. This parameter does
not populate any parameter values.
AdDiskCollector Y std undef 1–1 undef 30 min bool 0 - successful
alarm collection
Collects the parameter information for the 1 - failed collection
AdDiskSpaceUsed and AdDiskSpaceAvailable
parameters.

PATROL Parameter Reference Manual 695

PATROL Parameter Reference Manual 696

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 12 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdDiskSpaceAvailable Y con undef 0–50 50-100 NA graph MB
alarm warn
Reports the amount of disk space available on the current
volume that hosts the Active Directory data repository.

Collector: AdDiskCollector
AdDiskSpaceUsed Y con undef undef undef NA graph MB

Reports the amount of disk space used by the Active

Directory data repository.

Collector: AdDiskCollector
AdIntersiteReplicationStatus active/ con undef 1–1 2–2 NA graph 0 - replication
inactive warn alarm succeeded
Reports whether replication for this domain controller is status 1 - replication
occurring properly between sites in the domain. depends interval exceeded
on 2 - replication failed
Note:This parameter is inactive by default. Each environm
discovery cycle, the KM checks to see if the current DC is ent
a bridgehead server. If the current server becomes a
bridgehead server, then the parameter becomes active.
Because the active/inactive status is determined
programmatically, changing the active/inactive setting
for the parameter has no effect on the active/inactive
status at runtime.

Collector: AdReplicationCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 13 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdIntrasiteReplicationLatency active/ con undef undef undef NA graph sec
inactive
Reports the average replication latency between domain status
controllers within the site/domain and the current depends
domain controller. Data points are annotated with the on
maximum latency reported and the name of the domain environm
controllers to which the current domain controller is ent
replicating.

Note:This parameter is inactive by default. Each

discovery cycle, the KM checks to see if more than one
DC is in the current site. If there is more than one DC in
the site, then the parameter becomes active. Because the
active/inactive status is determined programmatically,
changing the active/inactive setting for the parameter has
no effect on the active/inactive status at runtime.

Collector: AdReplicationCollector
AdIntrasiteReplStatus active/ con undef 1–1 2–2 NA graph 0 - replication
inactive warn alarm succeeded
Reports whether replication is occurring properly within status 1 - replication
the site/domain for this domain controller. depends interval exceeded
on 2 - replication failed
Note:This parameter is inactive by default. Each environm
discovery cycle, the KM checks to see if more than one ent
DC is in the current site. If there is more than one DC in
the site, then the parameter becomes active. Because the
active/inactive status is determined programmatically,
changing the active/inactive setting for the parameter has
no effect on the active/inactive status at runtime.

Collector: AdReplicationCollector

PATROL Parameter Reference Manual 697

PATROL Parameter Reference Manual 698

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 14 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdReadRate N con undef undef undef NA graph operations per sec

Reports the number of Active Directory read operations

issued against the Active Directory server since the last
collection cycle.

Collector: AdPerfCollector
AdSearchRate N con undef undef undef NA graph operations per sec

Reports the number of Active Directory search operations

issued against the Active Directory server since the last
collection cycle.

Collector: AdPerfCollector
AdServerNameTransRate N con undef undef undef NA graph operations per sec

Reports the number of Active Directory server name

translations issued against the Active Directory server.

Collector: AdPerfCollector
AdSysvolShared Y con undef 1–1 undef NA graph 0 - shared
alarm 1 - not shared
Reports whether or not Sysvol is shared. Sysvol must be
shared for group policy to be replicated and applied to
domain controllers and other objects.

Collector: AdDiskCollector
AdThreadsInUse N con undef undef undef NA graph number of threads

Reports the number of threads in use by the Active

Directory server.

Collector: AdPerfCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 15 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
AdWriteRate N con undef undef undef NA graph operations per sec

Reports the number of Active Directory write operations

issued against the Active Directory server.

Collector: AdPerfCollector
PATROL KM for Microsoft Cluster Server 1.5.01
MCS_Cluster Application Class
ClusterAvailability Y con undef‘ undef undef set by coll gauge percentage of hours

Reports how long the cluster has been up and running as

a percentage of hours from January 1 of the current year
to the current date.

Collector: ClusterUptimeColl
ClusterStatus Y con 0–3 1–1 2–2 set by coll stoplight 0 - up
alarm warn alarm 1 - ClusterService
Displays whether the cluster is up/down as a whole and down on at least one
on each specific node. node
2 - ClusterService
Collector: ClusterObjectStatusColl down on all nodes
ClusterUptime Y con undef undef undef set by coll gauge hr

Reports how long the cluster has been up and running as

a number of hours to the current date.

Collector: ClusterUptimeColl
ClusterUptimeColl Y std undef 1 undef 120 sec bool 0 - no error
warn 1 - error
Collects cluster uptime information and sets the values (if collector
for the ClusterAvailability and ClusterUptime experiences
parameters. problems)

PATROL Parameter Reference Manual 699

PATROL Parameter Reference Manual 700

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 16 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MCS_Clusters Application Class
McsCheckConfiguration Y std undef undef undef 3600 sec text undef

Displays the KM configuration verification information.

Alarms if a problem is detected.
McsGatewayStatus Y std undef 1 undef 600 sec bool 0 - available
warn 1 - unavailable
Reports the availability of the McsGateway. When
McsGateway is up and running, the parameter value is 0.
When McsGateway is down, the parameter value is 1.

Note:The parameter value updates only if more than 5

minutes have passed since the last update, or if you
refresh the process cache.
McsGwConAvailable Y std undef 1 undef 120 sec stoplight 0 - available
alarm 1 - unavailable
Reports if there is a working connection between the
McsGateway and the PATROL Agent by having the
McsService send a message through the McsGateway to
the PATROL Agent. The McsService sends a status
message every five minutes.

Note:The parameter value updates only if the last event is

more than 5 minutes old, or if you update the process
cache.
McsServiceStatus Y std undef 1 undef 600 sec bool 0 - available
warn 1 - unavailable
Reports the availability of the McsService. When the
service is running, the parameter value is 0. When the
service is down, the parameter value is 1.
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 17 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MCS_Collectors Application Class
ClusterObjectsColl Y std undef 1 undef 1 hr bool 0 - no error
warn 1 - error
Searches for available cluster objects and then populates a
variable in PatrolAgent memory, which will be read by
the discovery process of related application classes. The
parameter value is set to 1 when an error condition occurs
and information cannot be collected.
ClusterObjectInfoColl Y std undef 1 inactive by 1 hr bool 0 - no error
warn default 1 - error
Collects cluster object information for all cluster objects
except resources. The parameter value is set to 1 when an
error condition occurs.
ClusterObjectStatusColl Y std undef 1 undef 1 hr bool 0 - no error
warn 1 - error
Collects cluster status information for all cluster objects
except resources. The parameter value is set to 1 when an
error condition occurs.
ClusterResourceInfoColl Y std undef 1 undef 1 hr bool 0 - no error
warn 1 - error
Collects information about cluster resources. The
parameter value is set to 1 when an error condition occurs
and information cannot be collected.
ClusterResTypeDLLVerColl Y std undef 1 undef 1 hr bool 0 - no error
warn triggered by 1 - error
Collects information about cluster resource-type DLLs. ClusterObjectSt
The parameter value is set to 1 when an error condition atusColl if in an
occurs and information cannot be collected. offline status
and by
GroupFailover
if a failover
occurs

PATROL Parameter Reference Manual 701

PATROL Parameter Reference Manual 702

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 18 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
TraceConfigFileAvailable Y std undef undef undef 1 hr bool 0 - false
1 - true
Checks whether the KM configuration file
MCS_Trace_ClusterN‘ame.cfg is available and switches
trace on/off for application class discovery and all
dependent parameters according to the file.
MCS_Group_Resources Application Class
FileShareUnavailable N std undef 1 2 600 sec stoplight 0 - available
warn, no access alarm, cannot 1–2 - unavailable
Monitors whether the cluster file share is accessible from permissions to map file share
a client. The user defined in the agent’s config-database / map the file
AgentSetup/defaultAccount must have the permissions share)
to map the appropriate file shares.
FreeSpace Y, if std undef 0–5 5–10 600 sec graph GB
resource alarm warn
Displays the free space on the disk. An annotation shows is of type
the free space for each partition. Physocal
Disk
ResourceStatus Y con 0–6 1–5 6 none stoplight 0 - online
alarm warn alarm 1–4 - in transition
Displays the status of a selected resource. 5 - offline
6 - failed
Collector: ClusterObjectStatusColl
MCS_Groups Application Class
CheckIPResourceColl Y std undef 1 undef 600 sec bool 0 - address available
warn 1 - address not
Pings the group IP resource (address) if available and available
publishes the ping response and response time.

Note: CheckIPResourceColl is launched with the

PtPing.exe command. This command will fail if the /
Agentsetup/defaultAccount does not have administrator
privileges.
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 19 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
GroupFailover Y std 0–1 1 undef 600 sec stoplight 0 - OK
warn warn 1 - failover
Indicates that a failover has occurred. The failover may
have occurred due to a failure or a manual move.
GroupStatus Y con 0–4 1–3 4 set by coll stoplight 0 - online
alarm warn alarm 1 - partial online
Displays the group status as online, partial online, offline, 2 - pending
unknown, or failed. 3 - offline
4 - failed (Windows
Collector: ClusterObjectStatusColl 2000 only)
IPResourceRespTime Y con 0–701 300–500 500–700 set by coll graph msec
alarm warn alarm
Displays the response time measured by ping. If the
group contains more than one IP resource,
CheckIPResourceColl sets the parameter value to the
maximum average response time and writes an
annotation containing a list of average response times for
all IP resources in the current group.

Collector: CheckIPResourceColl.
IPResourceUnAvailable Y con undef 1 undef set by coll stoplight 0 - available
alarm 1 - unavailable
Displays an annotation that shows the IP address of the
group if a resource does not respond to the ping
command.

Collector: CheckIPResourceColl
MCS_Network_Interfaces Application Class
InterfaceStatus Y con 0–3 1–2 3 set by coll stoplight 0 - up
warn alarm 1 - unavailable
Displays the availability status of the network interface 2 - unreachable
on each node. The status levels are: 3 - failed

Collector: ClusterObjectStatusColl

PATROL Parameter Reference Manual 703

PATROL Parameter Reference Manual 704

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 20 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MCS_Networks Application Class
NetworkStatus Y con 0–3 1–2 3 set by coll stoplight 0 - up
alarm warn alarm 1 - partitioned
Displays the availability status of the network. 2 - unavailable
3 - down
ClusterObjectStatusColl
MCS_Nodes Application Class
ClusterLogFileError Y std 0–2 1 2 600 sec stoplight error level
warn warn alarm
Reacts on keyword matching in the cluster log file. f no
keywords are specified, this parameter is offline.
ClusterLogFileSize Y std 0–24000 8000–16000 16000–24000 600 sec graph KB
warn warn alarm
Monitors the size of the cluster log file when cluster
diagnostic logging (logging mode) is enabled. If logging
is disabled, this parameter is offline.
NodeStatus Y con 0–3 1–2 3 set by coll stoplight 0 - up
alarm warn alarm 1 - joining
Displays the operational status of a selected node. The 2 - paused
status levels are: 3 - down

Collector: ClusterObjectStatusColl
MCS_Performance Application Class
AvWorkLoad Y std 0–100 80–90 90–100 600 sec graph percent
warn warn alarm
Displays the average processor time of the cluster nodes.
WorkLoadDelta Y con undef 40–50 50–100 set by coll graph none
warn alarm
Displays the workload delta of the cluster nodes
compared to a baseline.

Collector: AvWorkLoad
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 21 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MCS_Quorum Application Class
BackupClusterDatabase Y std 0–1 1 undef 28800 sec bool 0 - no error
warn alarm, backup 1 - error
Creates a backup of the cluster database and shows the failed
backup status.
QuorumInfoColl Y std undef 1 undef 600 sec bool 0 - no error
warn, if 1 - error
Collects quorum information. collector
experiences
problems
QuorumSize Y std 0–100 undef undef 30 min graph KB
warn
Displays the quorum log file size.

Note:Until the first poll response is received from the

cluster, the QuorumSize parameter is offline.
PATROL History Loader 1.5.00
History Propagator Application
fileTransSize Y con undef undef undef set by coll graph KB

Reports the total size of all files that are to be loaded into
database tables.

Collector: GetHistoryData

PATROL Parameter Reference Manual 705

PATROL Parameter Reference Manual 706

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 22 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
GetHistoryData Y coll NA NA NA 60 min none NA

Executes the dump_hist utility and copies the data to the

target machine.

Note: If you use the default polling cycle of every 60

minutes, this parameter will create a large amount of
network traffic to each History Loader computer. To
reduce network traffic, create a local (customized)
parameter on each History Loader computer and set the
polling cycle of each local parameter to run at different
intervals (for example, one polling cycle every 90
minutes, another polling cycle every 12 hours, etc.).
LastSendStatus Y con NA NA NA set by coll text NA

Reports the status (successful or failed transfer) of the last

data transmission.

Collector: GetHistoryData
numUnsuccTxns Y con undef 1–2 3–100 set by coll graph number of
warn alarm transactions
Reports the number of consecutive unsuccessful data
transmissions while the dump_hist utility is running.

Collector: GetHistoryData
RDBMS History Loader Applications
DB2 History Loader
FilesWaiting Y con undef undef undef set by coll gauge number of files

Reports the number of history data files waiting to be

loaded into database tables.

Collector: LoaderStats
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 23 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
LoaderErrors Y con undef 1–3 4–100 set by coll gauge number of errors
warn alarm
Reports the number of History Loader errors that have
occurred.

Collector: LoaderStats
LoaderStats Y coll undef undef undef 15 min NA NA

Collects information for PATROL History Loader. Sets

the values of FilesWaiting, LoaderEvents,
ServerFileSpaceUsed parameters.
LoadHistoryData Y std undef undef undef 7 days NA NA
(every Saturday
Loads the history data files from the History Propagator at 2:00 a.m.)
into the specified database.

If an error occurs, the parameter moves the error message

to the error file. The parameter displays the full text of the
session that generated the error in an error log file.

Note: If you use the default polling cycle of every

Saturday, this parameter will use a large amount of CPU
on each RDBMS computer. To reduce CPU usage, change
the parameter polling cycle to run more frequently (for
example, once or twice per day).

PATROL Parameter Reference Manual 707

PATROL Parameter Reference Manual 708

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 24 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ServerFileSpaceUsed Y con undef undef undef set by coll gauge MB

Reports the space used (in megabytes) by history data

files waiting to be loaded into database tables.

Collector: LoaderStats
Microsoft SQL Server History Loader
FilesWaiting Y con undef undef undef set by coll gauge number of files

Reports the number of history data files waiting to be

loaded into database tables.

Collector: LoaderStats
LoaderErrors Y con undef 1–3 4–100 set by coll gauge number of errors
warn alarm
Displays the number of load errors that have occurred.

Collector: LoaderStats
LoaderStats Y coll undef undef undef 15 min NA NA

Collects information for PATROL History Loader. Sets

the values of FilesWaiting, LoaderEvents,
ServerFileSpaceUsed parameters.
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 25 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
LoadHistoryData Y std undef undef undef 7 days NA NA
(every Saturday
Loads the history data files from the History Propagator at 2:00 a.m.)
into the specified database.

If an error occurs, the parameter moves the error message

to the error file. The parameter displays the full text of the
session that generated the error in an error log file.

Note: If you use the default polling cycle of every

Saturday, this parameter will use a large amount of CPU
on each RDBMS computer. To reduce CPU usage, change
the parameter polling cycle to run more frequently (for
example, once or twice per day).
ServerFileSpaceUsed Y con undef undef undef set by coll gauge MB

Reports the space used (in megabytes) by history data

files waiting to be loaded into database tables.

Collector: LoaderStats
Oracle Server History Loader
FilesWaiting Y con undef undef undef set by coll gauge number of files

Reports the number of history data files waiting to be

loaded into database tables.

Collector: LoaderStats
LoaderErrors Y con undef 1–3 4–100 set by coll gauge number of errors
warn alarm
Displays the number of load errors that have occurred.

Collector: LoaderStats

PATROL Parameter Reference Manual 709

PATROL Parameter Reference Manual 710

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 26 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
LoaderStats Y coll undef undef undef 15 min NA NA

Collects information for PATROL History Loader. Sets

the values of FilesWaiting, LoaderEvents,
ServerFileSpaceUsed parameters.
LoadHistoryData Y std undef undef undef 7 days NA NA
(every Saturday
Loads the history data files from the History Propagator at 2:00 a.m.)
into the specified database.

If an error occurs, the parameter moves the error message

to the error file. The parameter displays the full text of the
session that generated the error in an error log file.

Note: If you use the default polling cycle of every

Saturday, this parameter will use a large amount of CPU
on each RDBMS computer. To reduce CPU usage, change
the parameter polling cycle to run more frequently (for
example, once or twice per day).
ServerFileSpaceUsed Y con undef undef undef set by coll gauge MB

Reports the space used (in megabytes) by history data

files waiting to be loaded into database tables.

Collector: LoaderStats
Sybase SQL Server History Loader
FilesWaiting Y con undef undef undef set by coll gauge number of files

Reports the number of history data files waiting to be

loaded into database tables.

Collector: LoaderStats
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 27 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
LoaderErrors Y con undef 1–3 4–100 set by coll gauge number of errors
warn alarm
Displays the number of load errors that have occurred.

Collector: LoaderStats
LoaderStats Y coll NA NA NA 15 min NA NA

Collects information for PATROL History Loader. Sets

the values of FilesWaiting, LoaderEvents,
ServerFileSpaceUsed parameters.
LoadHistoryData Y std undef undef undef 7 days NA NA
(every Saturday
Loads the history data files from the History Propagator at 2:00 a.m.)
into the specified database.

If an error occurs, the parameter moves the error message

to the error file. The parameter displays the full text of the
session that generated the error in an error log file.

Note: If you use the default polling cycle of every

Saturday, this parameter will use a large amount of CPU
on each RDBMS computer. To reduce CPU usage, change
the parameter polling cycle to run more frequently (for
example, once or twice per day).
ServerFileSpaceUsed Y con undef undef undef set by coll gauge MB

Reports the space used (in megabytes) by history data

files waiting to be loaded into database tables.

Collector: LoaderStats
PATROL KM for Microsoft Network Load Balancing 1.5.01
LBS_Cluster Application Class
LbsClusterColl Y coll NA NA NA 1 min NA NA

Serves as the collector for the LBS_Cluster class.

PATROL Parameter Reference Manual 711

PATROL Parameter Reference Manual 712

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 28 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
LbsClusterMemberNodes Y con NA NA NA set by coll text NA

Displays a list of the Network Load Balancing nodes that

are being monitored for this cluster, along with the host
priority and status of each monitored node.

Collector: LbsClusterColl
LbsClusterStatus Y con 0–2 1 2 set by coll stop-light 0 - OK
warn alarm 1 - warn
Displays the status of the cluster. 2 - alarm

Collector: LbsClusterColl
LBS_Clusters Application Class
LbsClustersColl Y coll NA NA NA 5 min NA NA

Serves as the collector for the LBS_Clusters application

class.
LbsClustersTotalClusterCount Y con undef undef undef set by coll graph number of total
clusters
Reports the number of Network Load Balancing clusters
being monitored by the Knowledge Module (KM).

Collector: LbsClustersColl
LbsClustersTotalNodeCount Y con undef undef undef set by coll graph number of total
nodes
Reports the number of Network Load Balancing nodes
currently being monitored by the Knowledge Module
(KM).

Collector: LbsClustersColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 29 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
LBS_Events Application Class
LbsEvtColl Y coll NA NA NA 2 min NA NA

Serves as the collector for the LBS_Events application

class.
LbsEvtDailySysLogErrors Y con 1 undef undef set by coll graph number of error
alarm events
Reports the sum total of Network Load Balancing errors
recorded in the Microsoft Windows Servers Event System
Logs within the current 24-hour period for all monitored
cluster nodes. This parameter displays an alarm when an
error event is found in the System Log.

Each node within a Network Load Balancing cluster

records the error messages about other nodes. For
example, if node x has port rules that are inconsistent
with the rest of the cluster nodes’ port rules, each node
records the error message “node X does not have the
same number or type of port rules as this host”.

Collector: LbsEvtColl
LbsEvtDailySysLogInformation Y con undef undef undef set by coll graph number of
information events
Reports the sum total of Network Load Balancing
information events recorded in the Microsoft Windows
Servers Event System Logs for all monitored cluster
nodes.

Collector: LbsEvtColl

PATROL Parameter Reference Manual 713

PATROL Parameter Reference Manual 714

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 30 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
LbsEvtDailySysLogWarnings Y con 1 undef undef set by coll graph number of warning
warn events
Reports the sum total of Network Load Balancing
warnings recorded in the Microsoft Windows Event
Servers System Logs for all monitored cluster nodes. This
parameter displays a warning when an error event is
found in the System Log.

Collector: LbsEvtColl
LBS_Node Application Class
LbsNodeColl Y coll NA NA NA 2 min NA NA

Serves as the collector for the LBS_Node application class.

LbsNodeStatus Y con 0–7 2–6 6–7 set by coll graph OK: 0–1
alarm warn alarm 0 - converged
For each monitored node, reports the node status and 1 - default
initiates an alarm condition if the node is down or is no warn: 2–6
longer functioning as part of the cluster. 2 - converging
3 - stopped
Collector: LbsNodeColl 4 - draining
5 - suspended
6 - other
alarm: 7
7 - ping response
failure
WmiStatus Y std undef 1 undef 5 min graph 0 - available
warn 1 - unavailable
Checks if a connection to the WMI namespace
\\<node_name>\root\microsoftnlb can be established.
If the connection is successful, the value is set to 0.
Otherwise, the value is set to 1.
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 31 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
LBS_Performance Application Class
LbsPerfAvailableBytes Y con undef undef undef set by coll graph MB

Displays the amount of physical memory currently

available on the node.

Collector: LbsPerfColl
LbsPerfAvailBytesPct Y con 0–100 0–10 10–20 set by coll graph available physical
alarm warn memory percentage
Displays the percentage of total physical memory that is
available on the node.

Collector: LbsPerfColl
LbsPerfColl Y coll NA NA NA 5 min NA NA

Serves as the collector for the LBS_Performance

application class.
LbsPerfCpuUsagePct Y con 0–100 80–90 90–100 set by coll graph CPU usage
warn alarm percentage
Displays the total CPU usage percent for all processes
running on the node and alarms when the percentage
passes a threshold.

Collector: LbsPerfColl
LbsPerfPageFileUsagePct Y con undef 90–95 95–100 set by coll graph page file usage
warn alarm percentage
Displays the page file usage percent and alarms when the
percentage exceeds a threshold.

Collector: LbsPerfColl
LbsPerfWebSvcConn Y con undef undef undef set by coll graph number of
connections
Displays the current number of Web Service connections.

Collector: LbsPerfColl

PATROL Parameter Reference Manual 715

PATROL Parameter Reference Manual 716

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 32 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PATROL for Microsoft Windows Domain Services 1.5.01
NT_DFS_ROOT Application Class
DfsCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_DFS_ROOT application

class.
DfsConnectionCount Y con undef undef undef set by coll graph number of users
connected
Monitors the number of users connected to the current
DFS share.

Collector: DfsCollector
DfsConnectionPercent Y con undef 75–90 90–100 set by coll graph percentage
warn alarm
Monitors the percentage of the maximum number of
connections that is currently in use. If no maximum is set,
this parameter will not be enabled.

Collector: DfsCollector
DfsEvtLogErrorCount Y con 0–0 undef undef set by coll graph number of error
alarm outside events
Monitors the number of DFS related error events that of range
have occurred in the Windows NT event log since the last
collection cycle. Displays an alarm when this value is
greater than 0.

Collector: DfsCollector
DfsEvtLogInfoCount Y con undef undef undef set by coll graph number of
information events
Monitors the number of DFS-related information events
that have occurred in the event log since the last
collection cycle.

Collector: DfsCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 33 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DfsEvtLogWarningCount Y con 0–0 undef undef set by coll graph number of warning
warn outside of events
Monitors the number of DFS-related warning events that range
have occurred in the event log since the last collection
cycle. Creates a warning when this value is greater than 0.

Collector: DfsCollector
DfsLinkCount Y con undef undef undef set by coll graph count of DFS links

Monitors the number of DFS links that are defined to the

current root DFS server.

Collector: DfsCollector
DfsLinkCountChg Y con undef 1–1 NA set by coll stoplight 0 - no change
warn 1 - change
Raises a warning any time the number of links defined to
the DFS changes.

Collector: DfsCollector
DfsRootReplicaCount Y con undef undef undef set by coll graph number of replicas
for the DFS root
Moitors the number of root replica servers that are
defined for the current DFS root.

Collector: DfsCollector
DfsRootReplicaCountChg Y con undef 1–1 undef set by coll stoplight 0 - no change
warn 1 - change
Raises a warning any time the number of configured root
replicas changes.

Collector: DfsCollector

PATROL Parameter Reference Manual 717

PATROL Parameter Reference Manual 718

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 34 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DfsServiceStatus Y con 1–1 NA NA set by coll graph 0 - no change
alarm when in 1 - change
Monitors whether or not the Distributed File System range
(DFS) service is running. This is done by querying the
status of the service via the service control manager
routines. Alarms whenever the DFS server is not running.

Collector: DfsCollector
NT_DFS_ROOT_REPLICA Application Class
DfsReplicaCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_DFS_ROOT_REPLICA

application class.
DfsReplicaConnectTime Y con undef undef undef set by coll graph msec

Indicates the amount of time, in milliseconds, required to

connect to and disconnect from the root replica share
name.

Collector: DfsReplicaCollector
DfsReplicaServiceStatus Y con 1–1 undef undef set by coll stop-light 1 - active
alarm when out 0 - unavailable
Monitors the status of the Distributed File System (DFS) of range
service on the server that is configured as a root replica.

Collector: DfsReplicaCollector
DfsReplicaStatus Y con 1–1 NA NA set by coll bool 1 - active
alarm when out 0 - unavailable
Indicates whether or not the root replica server can be of range
connected to. This test is done by attempting to connect to
the replica server.

Collector: DfsReplicaCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 35 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_DFS_LINK Application Class
DfsLinkCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_DFS_LINK application

class.
DfsLinkConnectTime Y con undef undef undef set by coll graph msec

Monitors the amount of time required to connect to and

disconnect from the link.

Collector: DfsLinkCollector
DfsLinkReplicaCount Y con undef undef undef set by coll graph number of link
replicas
Monitors the number of link replicas that are defined for
the current link.

Collector: DfsLinkCollector
DfsLinkReplicaCountChg Y con undef 1–1 undef set by coll stoplight 0 - no change
warn 1 - changed
Raises a warning any time the number of link replicas
defined to the current link changes.

Collector: DfsLinkCollector
DfsLinkStatus Y con undef 1–1 2–2 set by coll stoplight 0 - available
warn alarm 1 - partially available
Monitors whether or not the link is available to the DFS 2 - unavailable
root on the DFS server.

Collector: DfsLinkCollector
NT_DFS_LINK_REPLICA Application Class
DfsLinkReplicaCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_DFS_LINK_REPLICA

application class.

PATROL Parameter Reference Manual 719

PATROL Parameter Reference Manual 720

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 36 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DfsReplicationStatus Y con 0–0 undef undef set by coll stoplight 1 - different from the
alarm when out link
Monitors whether or not the current DFS replica link is of range 0 - same as the link
the same as the link it is replicating.

Collector: DfsLinkReplicaCollector
NT_DHCP Application Class
DhAckRate Y con undef undef undef set by coll graph acknowledgments
per minute
Displays the rate at which acknowledgments are received
per minute.

Collector: DhCollector
DhCollector Y coll NA NA NA 300 sec none NA

Serves as the collector for the NT_DHCP application

class.
DhDeclineRate N con undef undef undef set by coll graph declines per min

Displays the rate of DHCP declines received by the

DHCP server per minute.

Collector: DhCollector
DhNackRate Y con undef undef undef set by coll graph non-
acknowledgments
Displays the rate at which non-acknowledgments are per min
received per minute.

Collector: DhCollector
DhOfferRate N con undef undef undef set by coll graph offers per min

Displays the rate at which offers are sent per minute.

Collector: DhCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 37 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DhPercentLeasesAvailable Y con undef undef undef set by coll graph percentage of total
leases that are
Calculates the percentage of total leases that are available available
to clients.

Collector: DhCollector
DhReleaseRate N con undef undef undef set by coll graph releases per min

Displays the rate at which IP addresses are released per

minute.

Collector: DhCollector
DhRequestRate N con undef undef undef set by coll graph requests per min

Displays the rate at which DHCP requests are received

per minute.

Collector: DhCollector
DhScopeCount Y con undef undef undef set by coll graph number of defined
scopes
Monitors the number of scope definitions managed by
the DHCP server. A PATROL event is raised any time the
specified value changes.

Collector: DhCollector
DhServiceStatus Y con undef 0–0 undef set by coll graph 1 - available
alarm when in 0 - unavailable
Monitors whether or not the DHCP service is running. range
Displays an alarm when the DHCP service is not running.

Collector: DhCollector

PATROL Parameter Reference Manual 721

PATROL Parameter Reference Manual 722

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 38 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DhTotalLeaseAvail Y con undef 0–10 10–20 set by coll graph number of leases
alarm when in warn when in available on server
Monitors the number of DHCP leases available. Alarms range range
when the number of available leases falls below the
specified threshold.

Collector: DhCollector
DhTotalLeasesInUse Y con undef undef undef set by coll graph number of leases in
use on server
Monitors the number of DHCP leases currently in use.

Collector: DhCollector
DhTotalStaticCount N con undef undef undef set by coll graph number of static
leases on server
Monitors the number of static leases (reserved IP
addresses) that are defined for the DHCP server.

Collector: DhCollector
NT_DHCP_SCOPE Application Class
DhsCollector Y coll NA NA NA 600 sec text NA

Serves as the collector for the DHCP_SCOPE service.

DhsLeasesAvailable Y con undef 0–10 10–20 set by coll graph number of leases
alarm when out warn when out available
Monitors the number of DHCP leases that are available in of range of range
the current scope. Alarms when the number of available
leases falls below the specified threshold.

Collector: DhCollector
DhsLeasesInUse Y con undef undef undef set by coll graph number of leases in
use
Monitors the number of DHCP leases that are in use in
the current scope.

Collector: DhCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 39 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DhsPercentLeaseAvailable Y con undef undef undef set by coll graph percentage of leases
available in scope
Calculates the percentage of the total number of leases
available to clients for the specified scope.

Collector: DhCollector
DhsStaticCount N con undef undef undef set by coll graph number of static
leases in scope
Monitors the number of static leases (reserved IP
addresses) defined in the current scope.

Collector: DhCollector
NT_DNS Application Class
DnCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_DNS application class.

DnQueryFailureRate Y con undef undef undef set by coll graph failed queries per
min
Monitors the average number of failed queries per
minute.

Collector: DnCollector
DnQueryRate Y con undef undef undef set by coll graph number of queries
per min
Monitors the average number of queries received per
minute.

Collector: DnCollector
DnQueryResponseTime Y con undef undef undef set by coll graph msec

Records the number of milliseconds the DNS server takes

to process a sample request.

Collector: DnCollector

PATROL Parameter Reference Manual 723

PATROL Parameter Reference Manual 724

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 40 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DnQuerySuccessRate N con undef undef undef set by coll graph successful queries
per min
Monitors the average number of successful queries per
minute.

Collector: DnCollector
DnServiceStatus Y con 1–1 undef undef set by coll graph 1 - available
alarm when out 0 - unavailable
Monitors whether the DNS service is running. If the DNS of range
service is stopped or pending, this parameter will alarm.

Collector: DnCollector
NT_DNS_2000 Application Class
DnCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_DNS_2000 application

class.
DnDynUpdateQueuedRate Y con undef undef undef set by coll graph operations per min

Monitors the rate at which dynamic updates are being

queued by the DNS server.

Collector: DnCollector
DnDynUpdateRecvRate N con undef undef undef set by coll graph operations per min

Monitors the rate at which dynamic updates are being

received at the DNS server each minute.

Collector: DnCollector
DnDynUpdateRejectRate Y con undef undef undef set by coll graph operations per min

Monitors the rate at which dynamic updates are being

rejected by the DNS server.

Collector: DnCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 41 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DnDynUpdateTimeoutRate Y con 0–0 undef undef set by coll graph operations per min
alarm when out
Monitors the rate per minute at which dynamic updates of range
are failing due to timeout. Raises an alarm any time this
value is greater than 0.

Collector: DnCollector
DnDynUpdateWriteRate N con undef undef undef set by coll graph operations per min

Monitors the rate at which dynamic updates are written

to the DNS database each minute.

Collector: DnCollector
DnEvtLogErrorCount Y con 0–0 undef undef set by coll graph number of error
alarm when out events
Monitors the number of DNS-related error events that of range
have occurred in the Windows NT event log since the last
collection cycle. Displays an alarm when this value is
greater than 0.

Collector: DnCollector
DnEvtLogInfoCount Y con undef undef undef set by coll graph number of
information
Monitors the number of DNS-related information events messages
that have occurred in the Windows NT event log since the
last collection cycle.

Collector: DnCollector

PATROL Parameter Reference Manual 725

PATROL Parameter Reference Manual 726

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 42 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DnEvtLogWarningCount Y con 0–0 undef undef set by coll graph number of warning
warn when out events
Monitors the number of DNS-related warning events that of range
have occurred in the Windows NT event log since the last
collection cycle. Displays a warning when this value is
greater than 0.

Collector: DnCollector
DnQueryFailureRate Y con undef undef undef set by coll graph failed queries per
min
Monitors the number of failed queries per minute.
Alarms when the count exceeds a user-defined threshold.
Calculated using DnQueryRate and
DnQuerySuccessRate.

Collector: DnCollector
DnQueryRate Y con undef undef undef set by coll graph number of queries
per min
Monitors the average number of queries received per
minute. Alarms when the count exceeds a user-defined
threshold.

Collector: DnCollector
DnQueryResponseTime Y con undef undef undef set by coll graph msec

Records the number of milliseconds the DNS server takes

to process a sample request.

Collector: DnCollector
DnQuerySuccessRate N con undef undef undef set by coll graph successful queries
per min
Monitors the number of successful queries per minute.
Alarms when the count exceeds a user-defined threshold.

Collector: DnCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 43 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DnSecUpdateFailRate Y con 0–0 undef undef set by coll graph operations per min
alarm when out
Monitors the rate per minute at which secure updates are of range
failing on the DNS database. Raises an alarm when this
value is greater than 0.

Collector: DnCollector
DnSecUpdateRecvRate Y con undef undef undef set by coll graph operations per min

Monitors the rate per minute at which secure updates are

being received by the DNS server each minute.

Collector: DnCollector
DnServiceStatus Y con 1–1 undef undef set by coll graph 1 - available
alarm when out 0 - unavailable
Monitors whether or not the DNS service is running by of range
querying the status of the service through the service
control manager routines. Displays an alarm when the
DNS service is not running.

Collector: DnCollector
DnWinsLookupRate N con undef undef undef set by coll graph operations per min

Monitors the rate per minute at which WINS queries are

being received by the DNS server.

Collector: DnCollector
DnWinsResponseRate N con undef undef undef set by coll graph operations per min

Monitors the rate per minute at which responses to WINS

queries are being processed at the DNS server.

Collector: DnCollector

PATROL Parameter Reference Manual 727

PATROL Parameter Reference Manual 728

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 44 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DnWinsReverseLookupRate N con undef undef undef set by coll graph operations per min

Reports the rate per minute at which reverse lookup

WINS queries are being received by the DNS server.

Collector: DnCollector
DnWinsReverseResponseRate N con undef undef undef set by coll graph operations per min

Reports the rate per minute at which reverse lookup

WINS queries are being processed by the DNS server.

Collector: DnCollector
NT_DOMAIN Application Class
DmBdcCount N con undef undef undef set by coll graph number of backup
domain controllers
Provides a count of all of the BCD NT servers that are
members of the Domain and are active.

Note:If this parameter is made active and NETBIOS is

disabled, the parameter will be offline.

Collector: DmCollector
DmCollector Y coll NA NA NA 10 min text NA

Serves as the collector for the NT_DOMAIN class.

DmDcCount N con undef undef undef set by coll graph number of domain
controllers
Provides a count of all of the BDC NT servers or DC
Windows 2000 servers that are members of the Domain
and are active.

Note:If this parameter is made active and NETBIOS is

disabled, the parameter will be offline.

Collector: DmCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 45 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DmDhcpSrvCount N con undef undef undef set by coll graph number of DHCP
servers
Monitors the number of DHCP Servers in the domain.

Note:If this parameter is made active and NETBIOS is

disabled, the parameter will be offline.

Collector: DmCollector
DmLicenseCount N con undef undef undef set by coll graph number of active
Windows NT
Monitors the number of workstation licenses in use on workstations
the primary domain controller.

Note:If this parameter is made active and NETBIOS is

disabled, the parameter will be offline.

Collector: DmCollector
DmMstrBrowserStat N con 0–0 undef undef set by coll stoplight 0 - not changed
alarm when out 1 - changed
raises a PATROL event and alarms if a new Master of range
Browser is elected for the Windows NT 4 domain.

Note:This Parameter is inactive on Windows 2000

domain controllers.

Collector: DmCollector
DmNodeCount N con undef undef undef set by coll graph number of computers
in the domain
Provides a count of all computers that are active members
of the Domain.

Note:If this parameter is made active and NETBIOS is

disabled, the parameter will be offline.

Collector: DmCollector

PATROL Parameter Reference Manual 729

PATROL Parameter Reference Manual 730

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 46 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DmRasConnCount Y con undef undef undef set by coll graph number of current
RAS connections
Monitors the number of remote access connections that
are active in the domain.

Collector: DmCollector
DmRasConnDenied N con undef undef undef set by coll graph number of denied
RAS connections
Monitors the number of remote access connections
denied within the domain.

Collector: DmCollector
DmServerCount N con undef undef undef set by coll graph number of domain
servers (DC, PDC,
Provides a count of all servers that are active members of BDC member
the Domain. servers)

Note:If this parameter is made active and NETBIOS is

disabled, the parameter will be offline.

Collector: DmCollector
DmServerStatus Y con 1–1 undef undef set by coll bool 1 - available
alarm 0 - unavailable
Monitors the current status of the primary domain
controller. Alarms when the server is unavailable.

Collector: DmCollector
DmSessionCount Y con undef undef undef set by coll graph number of server
sessions
Provides a count of all active user sessions on the primary
domain controller.

Collector: DmCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 47 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DmTrustRelCount Y con undef undef undef set by coll graph number of trust
relationships
Monitors the number of trust relationships associated
with the primary domain controller (PDC). An event is
raised any time the value changes.

Collector: DmCollector
DmWinsSrvCount N con undef undef undef set by coll graph number of WINS
servers
Monitors the servers running WINS within the domain. A
PATROL event is raised if the number of WINS servers
changes.

Note:If this parameter is made active and NETBIOS is

disabled, the parameter will be offline.

Collector: DmCollector
DmWksCount N con undef undef undef set by coll graph number of
workstations in the
Provides a count of all workstations that are active domain
members of the domain.

Collector: DmCollector
NT_MEMBER_SERVER Application Class
SvCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_MEMBER_SERVER

application class.
SvIdleSessionCount Y con undef undef undef set by coll graph number of idle
sessions
Provides a count of all user sessions that have been idle
for a specified amount of time. Alarms when the count
reaches the user-defined threshold.

Collector: SvCollector

PATROL Parameter Reference Manual 731

PATROL Parameter Reference Manual 732

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 48 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
SvServerStatus Y con 1–1 undef undef set by coll stoplight 1 - active
alarm when out 0 - unavailable
Monitors the current status of the server. Alarms when of range
the server is unavailable.

Collector: SvCollector
SvSessionCount Y con undef undef undef set by coll graph number of active
sessions
Provides a count of all the user sessions that are active on
the current server.

Collector: SvCollector
NT_RAS Application Class
RaCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_RAS application class.

RaConnectionsAvail N con undef undef undef set by coll graph number of devices

Monitors the number of RAS devices that are currently

available.

Collector: RaCollector
RaConnectionsInUse N con undef undef undef set by coll graph number of
connections
Monitors the number of RAS connections currently in
use.

Collector: RaCollector
RaServiceStatus N con 1–1 undef undef set by coll graph 1 - available
alarm when 0 - unavailable
Monitors whether or not the RAS service is running. outside of range
Displays an alarm when the RAS service is not running.

Collector: RaCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 49 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_RAS_DEVICE Application Class
RdByteRecvRate Y con undef undef undef set by coll graph bytes per min

Monitors the rate at which the RAS device is receiving

data.

Collector: RdCollector
RdByteTransRate Y con undef undef undef set by coll graph bytes per min

Report the rate at which the RAS device is transmitting

data.

Collector: RdCollector
RdCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_RAS_DEVICE class.

RdConnDenied Y con undef undef undef set by coll graph number of
connections denied
Monitors the number of times there have been failed
logins on the specific device.

Collector: RdCollector
RdConnectedUser N std undef undef undef 600 sec text user name

Lists the name of the user connected with this device.

Collector: RdCollector
RdConnectTime Y con undef undef undef set by coll gauge min

Monitors the amount of time a user has been connected to

the RAS device.

Collector: RdCollector

PATROL Parameter Reference Manual 733

PATROL Parameter Reference Manual 734

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 50 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
RdDeviceStatus Y con 1–1 undef undef set by coll stoplight 1 - operating
alarm when out 0 - not operating
Monitors the current status of each RAS device. Alarms of range
when the RAS device is not connected.

Collector: RdCollector
RdErrorRate Y con undef undef undef set by coll graph communication
errors per min
Monitors the rate at which communication errors are
occurring on the RAS device.

Collector: RdCollector
RdIdleConnectTime Y con undef undef undef set by coll gauge min

Monitors the amount of time a user has been connected to

the RAS device in an idle state.
NT_REPLICATION Application Class
RpCollector Y coll NA NA NA 300 sec text NA

Serves as collector for the NT_REPLICATION application

class.
RpServiceStatus Y con NA 0–0 NA set by coll stoplight 0 - stopped
alarm when 0 1 - running
Monitors the status of the Directory Replicator Service
running on the PATROL Agent server. Alarms when the
service is not available.

Collector: RpCollector
NT_REPLICATION_DIR Application Class
RpdCollector Y coll NA NA NA 600 sec text NA

Serves as the collector for the NT_REPL_DIR application

class.
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 51 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
RpdReplicationStatus Y con undef 0–0 undef set by coll stoplight 1 - synchronized
alarm when 0 0 - not synchronize
Monitors the status of the replication of each directory
tree. (Each directory tree is monitored to determine if the
replication is occurring and that the information is
accurate.) Alarms if the replication does not occur or the
data does not match after the replication.

Collector: RpdCollector
NT_REPL_SVR Application Class
RpsCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_REPL_SVR application

class.
RpsServiceStatus Y con undef 0–0 undef set by coll stoplight 0 - stopped
alarm when 0 1 - running
Monitors whether or not the Directory Replicator service
is running on the server to which the agent machine is
replicating. Alarms when the Replicator service is not
running.

Collector: RpdCollector
NT_REMOTE_SERVERS Application Class
MsCollector Y coll NA NA NA 600 sec text NA

Serves as the collector for the NT_REMOTE_SERVERS

application class.
MsConnectResponse Y con undef 0–0 undef set by coll graph msec
alarm when in
Monitors the amount of time the remote server takes to range
report connection requests.

Collector: MsCollector

PATROL Parameter Reference Manual 735

PATROL Parameter Reference Manual 736

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 52 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MsConnectStatus Y con undef 0–0 undef set by coll stoplight 1 - able to connect
alarm when 0 0 - unable to connect
Monitors whether a connection test was successful.

Collector: MsCollector
MsPatrolAgentStatus Y con undef 0–0 undef set by coll stoplight 1 - available
alarm when in 0 - unavailable
Gives the status of the PATROL Agent running on a range
remote server. Alarms when the agent is not available.

Collector: MsCollector
MsPingResponse Y con undef 0–0 undef set by coll graph msec
alarm when in
Monitors the amount of time required to perform an range
ICMP ping against the current network server. Alarms if
there is no response from the remote server.

Collector: MsCollector
MsServerAvailability Y con undef undef undef set by coll graph percentage of time
available
Monitors the percentage of time each server is available
to the domain for use.

Collector: MsCollector
NT_SHARES Application Class
ShCollector Y coll undef undef undef 600 sec text NA

Serves as the collector for the NT_SHARES application

class.
ShConnCount Y con undef undef undef set by coll graph number of connected
users
Monitors the number of users currently connected to a
given network share.

Collector: ShCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 53 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ShConnPercent Y con undef 75–90 90–100 set by coll graph percentage of total
warn alarm allowable
Monitors the percentage of total connections that are connections in use
allowed for the current share. If no limit is specified, this
parameter is set to zero.

Collector: ShCollector
ShDevicePercent Y con undef undef undef set by coll gauge percentage of total
device disk space
Monitors the percentage of total disk space on the device used by share
used by the current shared directory.

Collector: ShCollector
ShSpaceUsed Y con undef undef undef set by coll graph MB

Monitors the amount of disk space used by the current

network shared device.

Collector: ShCollector
ShThresholdPercent Y con 0–100 undef undef set by coll graph percentage of user
alarm when out defined threshold
Monitors the percentage of the user-specified threshold of range
that is used by the current shared directory. Alarms if the
percentage is greater than 100 percent of the user-
specified threshold.

Collector: ShCollector
NT_TRUST Application Class
TrAcceptedLogins N con undef undef undef set by coll graph number of logins

Monitors the number of logins accepted from the outside

trusted domain represented by this application instance.

Collector: TrCollector

PATROL Parameter Reference Manual 737

PATROL Parameter Reference Manual 738

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 54 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
TrCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_TRUST application

class.
TrDeniedLogins N con undef undef undef set by coll graph number of attempts

Monitors the number of logins from outside domains that

are refused due to an invalid trust relationship.

Collector: TrCollector
TrExtAcceptedLogins N con undef undef undef set by coll graph number of logins

Monitors the number of successful logins from the

current domain to the outside trusting domain
represented by the current application instance.

Collector: TrCollector
TrExtDeniedLogins N con undef undef undef set by coll graph number of attempts

Monitors the number of logins denied from the current

domain to the outside trusting domain represented by the
current application instance.

Collector: TrCollector
TrRelationshipStatus Y con undef 0–0 undef set by coll stoplight 1 - operating
alarm when 0 0 - not operating
Validates that the trust relationship is active and in use by
other domains within the environment.

Collector: TrCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 55 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
TrResponseTime Y con undef undef undef set by coll graph msec

Measures the connection response time to a trusting

domains.

Collector: TrCollector
NT_USER_ACCOUNTS Application Class
UsAuthenticatedByBDC N con undef undef undef set by coll bool 1 - BDC
0 - PDC
Provides BDC authentication data. In a Windows 2000
domain, this parameter is disabled.

Collector: UsCollector
UsCollector Y coll NA NA NA 2700 sec text NA

Serves as the collector for the NT_USER_ACCOUNTS

application class.
UsDaysSinceLogin Y con undef undef undef set by coll gauge number of days

Monitors the number of days that have passed since the

user logged into the domain.

Collector: UsCollector
UsDiskSpaceInUse N con undef undef undef set by coll graph MB

Monitors the amount of disk space in use by the users

home directory.

Collector: UsCollector

PATROL Parameter Reference Manual 739

PATROL Parameter Reference Manual 740

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 56 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
UsTimeLoggedIn Y con undef undef undef set by coll gauge min

Monitors the number of minutes the user account has

been logged in. If the user account is not logged in, the
parameter is set to zero.

Collector: UsCollector
NT_WINS Application Class
WnCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_WINS application class.

WnConflictRate Y con undef undef undef set by coll graph conflicts per min

Monitors the number of conflicts per minute. A conflict

occurs when a registration or renewal is attempted and
the name or address already exists within the database.

Collector: WnCollector
WnQueryFailureRate Y con undef undef undef set by coll graph failures per min

Monitors the number of failures per minute on the WINS

server.

Collector: WnCollector
WnQueryRate Y con undef undef undef set by coll graph requests per min

Monitors the number of queries per minute on the WINS

server.

Collector: WnCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 57 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
WnQuerySuccessRate Y con undef undef undef set by coll graph successes per min

Monitors the number of successful queries per minute by

the WINS server.

Collector: WnCollector
WnRegistrationRate Y con undef undef undef set by coll graph registrations per min

Monitors the rate at which registrations are received on

the WINS service. A registration occurs when a client
workstation sends its name to the WINS service to be
added to the database.

Collector: WnCollector
WnReleaseFailureRate Y con undef undef undef set by coll graph failures per min

Monitors the number of failed releases per minute.

Collector: WnCollector
WnReleaseRate Y con undef undef undef set by coll graph requests per min

Displays the rate at which the WINS server receives

messages that a WINS client is no longer operating. A
release message allows the WINS server to free the name
for future use.

Collector: WnCollector
WnReleaseSuccessRate Y con undef undef undef set by coll graph releases per min

Monitors the number of successful releases per minute.

Collector: WnCollector

PATROL Parameter Reference Manual 741

PATROL Parameter Reference Manual 742

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 58 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
WnRenewalRate Y con undef undef undef set by coll graph renewals per min

Monitors the rate at which the WINS server receives

renewal requests.

Collector: WnCollector
WnServiceStatus Y con NA 0–0 undef set by coll stoplight 1 - running
alarm when in 0 - stopped
Monitors whether or not the WINS service is running on range
each of the configured servers. This query can be run
from the PATROL Agent running on a primary domain
controller or backup domain controller against any host
in the domain that has an installed WINS service. Alarms
when the WINS service is not executing.

Collector: WnCollector
NT_WINS_PARTNER Application Class
WpCollector Y coll NA NA NA 300 sec text NA

Serves as the collector for the NT_WINS_PARTNER

application class.
WpReplicationFailures Y con 0–0 undef undef set by coll graph number of failed
alarm when out replications
Monitors the number of failures within the current WINS of range
partner.

Collector: WpCollector
PATROL for Microsoft COM+ 1.3.00
COM_APPLICATION Application Class
ComAppCpuUsage Y con 0–100 80–90 90–100 set by coll graph percent of CPU usage

Displays the application’s CPU usage in percent format.

Collector: ComApplicationCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 59 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ComApplicationCollector Y coll NA NA NA 1 min none NA

Collects information for the COM_APPLICATION

application class.
ComApplicationStatus Y con undef 0–0 undef set by coll stoplight 1 - active
alarm 0 - stopped
Reports whether the COM+ application is active. The
parameter alarms if the application is active.

Collector: ComApplicationCollector
ComAppPrivateMemory Y con 0–100 undef undef set by coll graph memory usage in KB

Displays the application’s private memory usage in

kilobytes.

Collector: ComApplicationCollector
ComAppThreadCount Y con 0–100 undef undef set by coll graph number of threads

Displays the application’s thread count.

Collector: ComApplicationCollector
ComCreateReleaseChange Y con 0–100 undef undef set by coll graph number of changed
instances
Displays the difference between the number of
component instances released and the number of
component instances created.

Collector: ComApplicationCollector
ComInstanceCreateRate Y con 0–100 NA NA set by coll graph number of creations
per minute
Displays the rate at which component instances are
created

Collector: ComApplicationCollector

PATROL Parameter Reference Manual 743

PATROL Parameter Reference Manual 744

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 60 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ComInstanceReleaseRate Y con 0–100 NA NA set by coll graph number of creations
per minute
displays the rate at which component instances are
released.

Collector: ComApplicationCollector
ComTransactionAbortRate Y con 0–100 undef undef set by coll graph aborted transactions
per minute
Displays the rate at which transactions are aborted.

Collector: ComApplicationCollector
COM_DTC Application Class
DtcAbortedTrans Y con 0–100 undef undef set by coll graph number of events

Reports the total number of aborted transactions. This

total does not include forced aborts (manually resolved
aborts). This total is reset to zero whenever you restart
MS_DTC.

Collector: DtcCollector
DtcAbortedTransPerSec Y con 0–100 undef undef set by coll graph number of events per
sec
Reports the rate of aborted transactions per second. This
total does not include forced comments (manually
resolved comments).

Collector: DtcCollector
DtcActiveTrans Y con 0–100 undef undef set by coll graph number of
transactions
Reports the current number of active transactions.

Collector: DtcCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 61 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DtcActiveTransMax Y con 0–100 undef undef set by coll graph number of
transactions
Reports the highest number of concurrently active
transactions since the MS DTC was last started.

Collector: DtcCollector
DtcCollector Y coll NA NA NA 1 min NA NA

Collects information for the DTC consumer parameters.

DtcCommittedTrans Y con 0–100 undef undef set by coll graph number of
transactions
Reports the cumulative total of committed transactions.
This total does not include forced commits (manually
resolved commits). This total is reset to zero whenever
you restart MS DTC.

Collector: DtcCollector
DtcCommittedTransPerSec Y con 0–100 undef undef set by coll graph number of
transactions
Reports the rate of committed transactions per second.
This total does not include forced commits (manually
resolved commits).

Collector: DtcCollector
DtcErrorLogEvents Y con 0–10000 1–10000 undef set by coll graph number of events
alarm
Reports the number of error events in the Application
Log of the Windows 2000 Event Viewer related to the MS
DTC service since the last collection cycle. It raises an
alarm if the count is over zero.

Collector: DtcCollector

PATROL Parameter Reference Manual 745

PATROL Parameter Reference Manual 746

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 62 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DtcForcedAbortTrans Y con 0–100 undef undef set by coll graph number of
transactions
Reports the cumulative total of forced-abort transactions.
This total is reset to zero whenever you restart MS DTC.

Collector: DtcCollector
DtcForcedCommitTrans Y con 0–100 undef undef set by coll graph number of
transactions
Reports the cumulative total of forced-commit
transactions. This total is reset to zero whenever you
restart MS DTC.

Collector: DtcCollector
DtcInDoubtTrans Y con undef undef undef set by coll graph number of
transactions
Reports the number of information events in the
Application Log of the Windows 2000 Event Viewer
related to the MS DTC service since the last collection
cycle.

Collector: DtcCollector
DtcInfoLogEvents Y con undef undef undef set by coll graph number of events

Reports the number of Windows 2000 information log

events related to the DTC runtime environment since the
last collection cycle.

Collector: DtcCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 63 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DtcResponseTimeAvg Y con 0–100 undef undef set by coll graph msec

Reports the average response time in milliseconds.

Response time is the duration of a transaction from the
point at which it began to the point at which it
committed.

Collector: DtcCollector
DtcResponseTimeMax Y con 0–100 undef undef set by coll graph msec

Reports the maximum response time in milliseconds.

Response time is the duration of a transaction from the
point at which it began to the point at which it
committed.

Collector: DtcCollector
DtcResponseTimeMin Y con 0–100 undef undef set by coll graph msec

Reports the minimum response time in milliseconds.

Response time is the duration of a transaction from the
point at which it began to the point at which it
committed.

Collector: DtcCollector
DtcStatus Y con undef 0–0 undef set by coll stoplight 1 - started
alarm 0 - stopped
Reports the status of the DTC service and raises an error
any time the service is down.

Collector: DtcCollector
DtcTransPerSec Y con 0–100 undef undef set by coll graph number of
transactions
Reports the number of transactions per second.

Collector: DtcCollector

PATROL Parameter Reference Manual 747

PATROL Parameter Reference Manual 748

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 64 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
DtcWarningLogEvents Y con 0–10000 1–10000 undef set by coll graph number of events
alarm alarm
Reports the number of warning events in the Application
Log of the Windows 2000 Event Viewer related to the MS
DTC service since the last collection cycle. It raises a
warning if the count is over zero.

Collector: DtcCollector
COM_PLUS Application Class
ComActiveApplications Y con NA NA NA set by coll gauge number of
applications
Reports the number of active COM+ applications.

Collector: ComCollector
ComCollector Y coll NA NA NA 2 min NA NA

Retrieves data for the COM_PLUS consumer parameters.

ComErrorLogEvents Y con NA 1–10000 NA set by coll graph number of events
alarm
Reports the number of error events in the Application
Log of the Windows 2000 Event Viewer related to the
COM+ runtime environment since the last collection
cycle. It raises an alarm if the count is over zero.

Collector: ComCollector
ComEventSystemStatus Y con undef 0–0 undef set by coll stoplight 1 - started
alarm 0 - stopped
Reports the status of the COM+ Event System Service and
alarms any time the service is down.

Collector: ComCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 65 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ComInfoLogEvents Y con 0–10000 NA NA set by coll graph number of events

Reports the number of information events in the

Application Log of the Windows 2000 Event Viewer
related to the COM+ runtime environment since the last
collection cycle.

Collector: ComCollector
ComProcessCount Y con NA 0–0 NA set by coll graph number of processes
alarm
Reports the number of dllhost.exe processes that are
running and alarms if the count goes to zero.

Collector: ComCollector
ComWarningLogEvents Y con 0-10000 1–10000 undef set by coll graph number of events
warn
Reports the number of warning events in the Application
Log of the Windows 2000 Event Viewer related to the
COM+ runtime environment since the last collection
cycle and raises a warning if the count is over zero.

Collector: ComCollector
MTS_MTS Application Class
MtsActivePackages Y con undef undef undef set by coll graph active package count

Displays the number of active packages.

Collector: MtsCollector
MtsCollector Y coll NA NA NA 1 min NA NA

Serves as a collector for all parameters in the application

class.

PATROL Parameter Reference Manual 749

PATROL Parameter Reference Manual 750

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 66 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MtsDtcStatus Y con 1–1 undef undef set by coll stoplight 1 - started
warn 0 - stopped
Displays whether the MS DTC service is running. If the
MS DTC service is not running, the parameter is placed in
an alarm state.

Collector: MtsCollector
MtsErrorLogEvents Y con undef undef undef set by coll graph number of error log
events
Displays the number of error log events logged since the
prior collection interval.

Collector: MtsCollector
MtsInfoLogEvents Y con undef undef undef set by coll graph number of
information log
Displays the number of information log events logged events
since the prior collection interval.

Collector: MtsCollector
MtsWarningLogEvents Y con undef undef undef set by coll graph number of warning
log events
Displays the number of warning log events logged since
the prior colleciton interval.

Collector: MtsCollector
MtsProcessCount Y con undef undef undef set by coll graph number of mtx
processes
Displays the number of mtx processes running on the
agent machine.

Collector: MtsCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 67 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MTS_PACKAGE Application Class
MtsComCreateInstanceRate Y con undef undef undef set by coll graph number of creations
per sec
Displays the rate at which component instances are
created.

Collector: MtsPackageCollector
MtsComReleaseInstanceRate Y con undef undef undef set by coll graph releases per sec

Displays the rate at which component instances are

released.

Collector: MtsPackageCollector
MtsPackageCollector Y coll NA NA NA 5 min NA NA

Serves as a collector for all parameters in the

MTS_PACKAGE application class.
MtsPackageCpuUsage Y con 0–100 80–90 90–100 set by coll graph percent of CPU usage

Displays package CPU usage in percent.

Collector: MtsPackageCollector
MtsPackagePrivateMemory Y con undef undef undef set by coll graph memory usage in KB

Displays package private memory usage in kilobytes.

Collector: MtsPackageCollector
MtsPackageStatus Y con undef undef undef set by coll stoplight 1 - active
0 - inactive
Displays whether or not the package is active.

Collector: MtsPackageCollector

PATROL Parameter Reference Manual 751

PATROL Parameter Reference Manual 752

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 68 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MtsPackageThreadCount Y con undef undef undef set by coll graph number of threads

Displays the package thread count.

Collector: MtsPackageCollector
MtsReleaseCreateDelta Y con undef undef undef set by coll graph number of changed
instances
Displays the difference between the number of
component instances released and the number of
component instances created.

Collector: MtsPackageCollector
MtsTransactionAbortRate Y con undef undef undef set by coll graph aborted transactions
per sec
Displays the rate at which transactions are aborted.

Collector: MtsPackageCollector
PATROL for Microsoft Message Queue 1.4.00
MQ_IS Application Class
MqIsAccessCount Y con undef undef undef set by coll graph number of
information store
Reports the total number of times the MQIS was accessed. accesses

Collector: MqIsColl
MqIsColl Y coll NA NA NA 1 min NA NA

Collects data for the MQ_IS application class.

MqIsErrors Y con undef undef undef set by coll graph number of
information store
Reports the total number of MQIS accesses that resulted errors
in an error being returned to the application.

Collector: MqIsColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 69 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MqIsReplicateIn Y con undef undef undef set by coll graph number of requests

Reports the total number of replication requests received.

Collector: MqIsColl
MqIsReplicateOut Y con undef undef undef set by coll graph number of requests

Reports the total number of replication requests sent.

Collector: MqIsColl
MqIsSynchIn Y con undef undef undef set by coll graph number of requests

Reports the total number of synchronization requests

received.

Collector: MqIsColl
MqIsSynchOut Y con undef undef undef set by coll graph number of requests

Reports the total number of synchronization requests that

were answered.

Collector: MqIsColl
MqIsWriteReqSent Y con undef undef undef set by coll graph number of requests

Reports the total number of write requests sent.

Collector: MqIsColl
MQ_QUEUES Application Class
MqqQueueColl Y coll NA NA NA 1 min NA NA

Collects information about individual queues managed

by the MSMQ service.

PATROL Parameter Reference Manual 753

PATROL Parameter Reference Manual 754

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 70 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MqqJournalMsgBytes Y con 1,600,000– 1,600,000– 1,600,000– set by coll graph KB
2,000,000 1,600,000 2,000,000
Displays the number of kilobytes used by all messages in
the queue.

Collector: MqqQueueColl
MqqJournalMsgCount Y con 450,000–999,999 450,000–450,000 450,000–999,999 set by coll graph number of messages

Displays the number of messages in the journal queue.

Collector: MqqQueueColl
MqqMessageBytes Y con 1,600,000– 1,600,000– 1,600,000– set by coll graph KB
2,000,000 1,600,000 2,000,000
Displays the size of all messages in the journal queue.

Collector: MqqQueueColl
MqqMessageCount Y con 450,000–999,999 450,000–450,000 450,000–999,999 set by coll graph number of messages

Displays the number of messages currently in the queue.

Collector: MqqQueueColl
MQ_ROUNDTRIP Application Class
MqRoundtripTime Y std undef undef undef 1 min graph msec

Schedules the roundtrip MSMQ message time between

the MSMQ server and another, operator-selected, MSMQ
server.

Collector: MqRoundtripTime
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 71 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MQ_SERVER Application Class
MqInMessageRate Y con undef undef undef set by coll graph messages per sec

Displays the rate at which messages are received by the

MSMQ service.

Collector: MqServerColl
MqIPSessions Y con undef undef undef set by coll graph session count

Displays the number of IP sessions connected to the

MSMQ service.

Collector: MqServerColl
MqIPXSessions Y con undef undef undef set by coll graph session count

Displays the number of IPX sessions connected to the

MSMQ service.

Collector: MqServerColl
MqMessageBytes Y con 1,600,000– 1,600,000– 1,600,000– set by coll graph KB
2,000,000 1,600,000 2,000,000
Displays the size of all message queues managed by the
MSMQ service.

Collector: MqServerColl
MqMessageCount Y con 450,000–999,999 450,000–450,000 450,000 set by coll graph message count
999,999
Displays the number of messages currently managed by
the MSMQ service.

Collector: MqServerColl

PATROL Parameter Reference Manual 755

PATROL Parameter Reference Manual 756

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 72 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MqMessageTime Y con undef undef undef set by coll text roundtrip message
time
Displays the roundtrip MSMQ message time between the
MSMQ server and another, operator-selected, MSMQ
server.

Collector: MqServerColl
MqOutMessageRate Y con undef undef undef set by coll graph messages per sec

Displays the rate at which messages are sent by the

MSMQ service.

Collector: MqServerColl
MqServerColl Y coll NA NA NA 1 min none NA

Collects information about the status of the MSMQ

service.
MqStatus Y con 0–2 1–1 2–2 set by coll stoplight up or down
warn alarm 0 - service up
Displays the status of the MSMQ service. 2 - service down

Collector: MqServerColl
MQ_SESSIONS Application Class
MqSessionsColl Y coll NA NA NA 1 min NA NA

Serves as the collector for the MQ_SESSIONS application

class.
MqsInByteRate Y con undef undef undef set by coll graph KB received per sec

Reports the rate at which data is being received over the

MSMQ session.

Collector: MqSessionsColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 73 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MqsInBytes Y con undef undef undef set by coll graph KB

Reports the total number of bytes received during the

MSMQ session.

Collector: MqSessionsColl
MqsInMsgCount Y con undef undef undef set by coll graph number of messages

Reports the total number of messages received during the

session.

Collector: MqSessionsColl
MqsInMsgRate Y con undef undef undef set by coll graph messages per sec

Reports the rate at which data is being received over the

MSMQ session.

Collector: MqSessionsColl
MqsOutByteRate Y con undef undef undef set by coll graph KB sent per sec

Reports the rate at which data is being sent over the

MSMQ session.

Collector: MqSessionsColl
MqsOutBytes Y con undef undef undef set by coll graph KB

Reports the total number of bytes sent during the MSMQ

session.

Collector: MqSessionsColl

PATROL Parameter Reference Manual 757

PATROL Parameter Reference Manual 758

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 74 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MqsOutMsgCount Y con undef undef undef set by coll graph number of messages

Reports the total count of messages sent during the

session.

Collector: MqSessionsColl
MqsOutMsgRate Y con undef undef undef set by coll graph messages sent per sec

Reports the rate at which MSMQ messages are being sent

over the MSMQ session.

Collector: MqSessionsColl
PATROL Knowledge Module for Microsoft Windows OS 3.8.02
ALL COMPUTERS Application Class
SNMPConfig N std NA NA NA 1 min NA NA

Configures the SNMP service for the computer.

SNMPStart Y std NA NA NA upon disc. NA NA

Attempts to start the SNMP subagent if it fails. If the start

attempt is unsuccessful, the parameter tries to start the
SNMP main agent.
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 75 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_BSK Application Class
BskStatus Y std 0–2 1–1 2–2 on reboot stoplight NA

Displays the status of the Blue Screen detection and the

status of changes made to the system’s Stop error
configuration parameters. This parameter can have the
following values:

■ 0–No action is necessary.

■ 1–The system crash settings have been changed. For
the new settings to take effect, the computer must be
rebooted.
■ 2–The system has crashed (blue screen). PATROL
performs the actions specified by the NT_BSK
application.
INET_NTS Application Class
dataRecvRate Y con undef undef undef set by coll graph KB per min

Indicates the activity level of IIS. This parameter

measures the rate at which data is received from all
clients. IIS can receive data through any IIS based server
including FTP and WWW. IIS4 installations may
optionally include SMTP and NNTP servers.

Collector: msPerfMonitor
dataSentRate Y con undef undef undef set by coll graph KB per min

Indicates the activity level of IIS. This parameter

measures the rate at which data is sent, or transmitted, to
all clients. IIS can send data through any IIS based server
including FTP and WWW. IIS4 installations may
optionally include SMTP and NNTP servers.

Collector: msPerfMonitor

PATROL Parameter Reference Manual 759

PATROL Parameter Reference Manual 760

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 76 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
msPerfMonitor Y std NA NA NA 5 min text NA

Collects the data for dataSentRate and dataRecvRate. To

manually initiate the collection of data for dataSentRate
and dataRecvRate this parameter can be updated from
the PATROL Console.
serviceStatus Y std 0–1 0–1 0–1 10 min stoplight Boolean
inactive by inactive by inactive by
Measures the availability of the IIS services. This default default default
parameter contains a value from zero to one to indicate
the status of the services. When all of the services are
started, the value is one. When all of the services are
stopped or paused, then the value is zero. If some services
are started, and others are stopped or paused, the value is
an average of all the services status.

Using status values of zero and one, it is very easy to

obtain an availability report by looking at the average of
this parameter over a period of history. For example, if
the average is taken over a history of seven days, and
produces the value 0.987 then the service availability is
98.7%.

The list of all IIS services is read from the configuration

variable /InetNtsSetup/ServiceList.
NT_CACHE Application Class
CACCacheColl Y coll NA NA NA 2 min NA NA

Collects cache statistics from the cache performance

objects in the Windows Performance Database.
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 77 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
CACcachCopyReadHitsPercent Y con 0–100 0%–19% 19%–30% set by coll graph percentage of cache
alarm outside alarm warn copy read requests
Displays the percentage of cache copy read requests. A of border
copy read is a file read operation that is satisfied by a
memory copy from a cache page to the application's
buffer.

Collector: CACCacheColl
CACcachCopyReadsPerSec Y con undef undef undef set by coll graph number of reads per
sec
Displays the frequency of reads from cache pages that
involve a memory copy of the data from the cache to the
application's buffer.

Collector: CACCacheColl
NT_COMPOSITES Application Class
CPARMCollector Y coll NA NA NA 5 min NA NA

Collects information for the defined composite

parameters.
CPARMResult Y con NA 1–1 2–2 set by coll stoplight NA
warn alarm
Displays the results of the composite parameter
calculation for the specified composite parameter.

Collector: CPARMCollector
CPARMExpression Y con NA NA NA set by coll text NA

Displays the composite parameter definition.

Collector: CPARMCollector

PATROL Parameter Reference Manual 761

PATROL Parameter Reference Manual 762

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 78 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
CPARMGeneratedCodeText Y con NA NA NA set by coll text NA

Displays the PSL that was generated by the

NT_Composites expression generator and used to
determine the composite parameter value.

Collector: CPARMCollector
NT_CompositesColl Application Class
NT_CompositesColl Y coll NA NA NA 5 min NA NA

Collects information for the defined composite

parameters.
NT_CPU Application Class
CPUprcrInterruptsPerSec Y con undef undef undef set by coll graph number of interrupts
per sec
Displays the number of device interrupts encountered by
the processor. An interrupt occurs when a device has
completed a task or when it requires attention. Normal
thread execution is suspended during interrupts. An
interrupt may cause the processor to switch to another,
higher priority thread.

Collector: CPUProcessorColl
CPUprcrPrivTimePercent Y con 0–100 90%–95% 95%–100% set by coll graph percentage of
alarm outside warn alarm processor time spent
Displays the percentage of processor time spent in of border in privileged mode
privileged mode in non-idle threads. Device drivers for
most devices except graphics adapters and printers
execute in privileged mode, as well as the Windows NT
service layer, the executive routines, and the Windows
NT kernel.

Collector: CPUProcessorColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 79 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
CPUprcrProcessorTimePercent Y con 0–100 90%–95% 95%–100% set by coll graph percentage of time a
alarm warn alarm processor is busy
Displays a percentage of the time that a processor is busy
executing the threads of a process. When in the alarm
state, this parameter graph displays an annotation
(usually denoted by *) that you can click to display the
names of the top 10 processes that are using the most
CPU resources.

Collector: CPUProcessorColl
CPUprcrUserTimePercent Y con 0–100 90%–95% 95%–100% set by coll graph percentage of CPU
alarm warn alarm time spent in user
Displays the percentage of CPU time currently being mode
spent in user mode doing commands and tasks initiated
by users. All application code and subsystem code
executes in user mode. This value helps identify how
much time a particular process spends executing in User
versus Privileged Mode.

Collector: CPUProcessorColl
CPUProcessorColl Y coll NA NA NA 1 min NA NA

Collects processor statistics from the processor

performance objects in the Windows Performance
Database.

PATROL Parameter Reference Manual 763

PATROL Parameter Reference Manual 764

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 80 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_EVINSTS Application Class
ELMError Y con undef 1–4000 undef set by coll graph number of events
alarm
Displays the number of error type events in each polling
cycle. The ELMError parameter is displayed only when
you select the following options when configuring the
event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Report the
number of events that match the filter criteria during each
collection period.
■ From the Event Type tab of the Configure Windows
Event Monitoring window, you select Error as one of
the monitored event types.
Collector: ELMColl
ELMErrorNotification Y con 0–4000 1–4000 4000–4000 set by coll graph number of events
active by inactive by
Indicates immediately when an Error event has occurred. default default
The ELMErrorNotification parameter is displayed only
when you select the following options when configuring
the event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Notifiy
PATROL immediately when an event matches the filter
criteria.
■ From the Event Type tab of the Configure Windows
Event Monitoring window, you select Error as one of
the monitored event types.
Collector: ELMColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 81 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ELMFailureAudit Y con undef 1–4000 4000–4000 set by coll graph number of failure
alarm inactive by audit events
Displays the number of failure audit type events in each default
polling cycle. The ELMFailureAudit parameter is
displayed only when you select the following options
when configuring the event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Report the
number of events that match the filter criteria during each
collection period.
■ From the Event Type tab of the Configure Windows
Event Monitoring window, you select Failure Audit as
one of the monitored event types.
Collector: ELMColl
ELMFailureAuditNotification Y con 0–4000 1–4000 4000–4000 set by coll graph number of events
active by inactive by
Indicates immediately when a Failure Audit event has default default
occurred. The ELMFailureAuditNotification parameter is
displayed only when you select the following options
when configuring the event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Notifiy
PATROL immediately when an event matches the filter
criteria.
■ From the Event Type tab of the Configure Windows
Event Monitoring window, you select Failure Audit as
one of the monitored event types.
Collector: ELMColl

PATROL Parameter Reference Manual 765

PATROL Parameter Reference Manual 766

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 82 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ELMInformation Y con undef 1–4000 4000–4000 set by coll graph number of events
inactive by inactive by
Displays the number of information type events in each default default
polling cycle. The ELMInformation parameter is
displayed only when you select the following options
when configuring the event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Report the
number of events that match the filter criteria during each
collection period.
■ From the Event Type tab of the Configure Windows
Event Monitoring window, you select Information as
one of the monitored event types.
Collector: ELMColl
ELMNotification Y con 0–4000 1–3 3–4000 set by coll graph number of events
active by active by
Indicates immediately when an event of any type has default default
occurred. The ELMNotification parameter is displayed
only when you select the following option when
configuring the event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Notifiy
PATROL immediately when an event matches the filter
criteria.
Collector: ELMColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 83 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ELMInformationNotification Y con 0–100 0–100 100–100 set by coll graph number of events
inactive by inactive by
Indicates immediately when a Information event type has default default
occurred. The ELMInformationNotification parameter is
displayed only when you select the following options
when configuring the event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Notifiy
PATROL immediately when an event matches the filter
criteria.
■ From the Event Type tab of the Configure Windows
Event Monitoring window, you select Information as
one of the monitored event types.
Collector: ELMColl

PATROL Parameter Reference Manual 767

PATROL Parameter Reference Manual 768

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 84 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ELMOtherTypes Y con undef 0–100 100–100 set by coll graph number of events
inactive by inactive by
Displays the number of events specified as Other that default default
occur during each polling cycle. Events designated as
Other are events of a type other than the following
standard Windows event types:

■ Information
■ Warning
■ Error
■ Success Audit
■ Failure Audit

The ELMOtherTypes parameter is displayed only when

you select the following option when configuring the
event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Report the
number of events that match the filter criteria during each
collection period.
Collector: ELMColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 85 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ELMOtherTypesNotification Y con 0–100 0–100 100–100 set by coll graph number of events
inactive by inactive by
Indicates immediately when an event specified as Other default default
has occurred. An event specified as Other is an event that
is not one of the following standard Windows event
types:

■ Information
■ Warning
■ Error
■ Success Audit
■ Failure Audit

The ELMOtherTypesNotification parameter is displayed

only when you select the following options when
configuring the event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Notifiy
PATROL immediately when an event matches the filter
criteria.
■ From the Event Type tab of the Configure Windows
Event Monitoring window, you select Other as one of
the monitored event types.
Collector: ELMColl
ELMStatus Y con undef 1–3 3–4000 set by coll graph number of events
warn alarm
Displays the number of events occurring in each polling
cycle, or the number of events notified by the Patrol Event
Log Manager.

Collector: ELMColl

PATROL Parameter Reference Manual 769

PATROL Parameter Reference Manual 770

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 86 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ELMSuccessAudit Y con undef 1–4000 4000–4000 set by coll graph number of events
inactive by inactive by
Displays the number of success audit type events in each default default
polling cycle. The ELMSuccessAudit parameter is
displayed only when you select the following options
when configuring the event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Report the
number of events that match the filter criteria during each
collection period.
■ From the Event Type tab of the Configure Windows
Event Monitoring window, you select Success Audit as
one of the monitored event types.
Collector: ELMColl
ElmSuccessAuditNotification Y con 0–100 0–100 100–100 set by coll graph number of events
inactive by inactive by
Indicates immediately when a Success Audit event has default default
occurred. The ELMSuccessAuditNotification parameter is
displayed only when you select the following options
when configuring the event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Notifiy
PATROL immediately when an event matches the filter
criteria.
■ From the Event Type tab of the Configure Windows
Event Monitoring window, you select Success Audit as
one of the monitored event types.
Collector: ELMColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 87 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ELMWarning Y con undef 0–500 500–4000 set by coll graph number of events
warn alarm
Displays the number of warning type events during each
polling cycle. The ELMWarning parameter is displayed
only when you select the following options when
configuring the event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Report the
number of events that match the filter criteria during each
collection period.
■ From the Event Type tab of the Configure Windows
Event Monitoring window, you select Warning as one
of the monitored event types.
Collector: ELMColl
ELMWarningNotification Y con 0–4000 1–4000 4000–4000 set by coll graph number of events
active by inactive by
Indicates immediately when a Warning event has default default
occurred. The ELMWarningNotification parameter is
displayed only when you select the following options
when configuring the event filter:

■ From the General tab of Configure Windows Event

Monitoring window, you select the option Notifiy
PATROL immediately when an event matches the filter
criteria.
■ From the Event Type tab of the Configure Windows
Event Monitoring window, you select Warning as one
of the monitored event types.
Collector: ELMColl
EvRptOfError Y con undef undef undef set by coll text NA

Report of the Error type events that occurred in the

polling cycle.

Collector: ELMColl

PATROL Parameter Reference Manual 771

PATROL Parameter Reference Manual 772

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 88 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
EvRptOfFailureAudit Y con undef undef undef set by coll text NA

Report of Failure Audit type events that occurred during

the polling cycle. The EvRptOfFailure parameter is
displayed only when you select the option Write event
details to text parameter.

Collector: ELMColl
EvRptOfInformation Y con undef undef undef set by coll text NA

Report of Information type events that occurred in the

polling cycle. The EvRptOfInformation parameter is
displayed only when you select the option Write event
details to text parameter.

Collector: ELMColl
EvRptOfStatus Y con undef undef undef set by coll text NA

Displays the text output of event descriptions that

occurred in the polling cycle, or the events notified by the
Patrol Event Log Manager. The EvRptOfStatus parameter
is displayed only when you select the following options
when configuring the event filter:

■ From the Event Type tab of the Configure Windows

Event Monitoring window, you select the option
Consolidate event types when reporting results.
■ From the Event Handling tab of the Configure
Windows Event Monitoring window, you select the
option Write event details to text parameter.
Collector: ELMColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 89 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
EvRptOfSuccessAudit Y con undef undef undef set by coll text NA

Report of Success Audit type events that occurred in the

polling cycle. The EvRptOfSuccessAudit parameter is
displayed only when you select the option Write event
details to text parameter.

Collector: ELMColl
EvRptOfWarning Y con undef undef undef set by coll text NA

Report of Warning type events that occurred in the

polling cycle. The EvRptOfWarning parameter is
displayed only when you select the option Write event
details to text parameter.

Collector: ELMColl
EVReportOfOtherTypes Y con undef undef undef set by coll text NA

Report of events designated as Other that occur during

each polling cycle. Events designated as Other are events
of a type other than the following standard Windows
event types:

■ Information
■ Warning
■ Error
■ Success Audit
■ Failure Audit

The EvRptOfOtherTypes parameter is displayed only

when you select the option Write event details to text
parameter.

Collector: ELMColl

PATROL Parameter Reference Manual 773

PATROL Parameter Reference Manual 774

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 90 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_EVLOGFILES Application Class
ELMColl Y coll NA NA NA 10 min NA NA

Collects information from the Windows Event Log.

ELMEvFileFreeSpacePercent Y con 0–100 0–5 5–10 set by coll graph ratio of free space to
alarm warn total space on the
Displays the ratio of the free space available on the event event log file
log file to the total space allocated for the event log file.
This parameter is not available if the monitored event log
file is set to:

■ Overwrite events older than 0 days, or

■ Overwrite events as needed

This parameter contains a recovery action that

automatically backs up and purges the event log files
when ELMEvFileFreeSpacePercent enters an alarm state.
PATROL does not execute this recovery action if the log is
allowed to be overwritten.

Collector: ELMColl
NT_FTP Application Class
FTPFtpColl Y coll NA NA NA 5 min NA NA

Collects FTP statistics from the FTP performance objects

in the Windows Performance Database.
FTPftpBytesRcvdPerSec Y con undef undef undef set by coll graph bytes per sec

Displays the number of bytes received per second from

the FTP protocol.

Collector: FTPFtpColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 91 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
FTPftpBytesSentPerSec Y con undef undef undef set by coll graph bytes per sec

Displays the number of bytes sent per second using the

FTP protocol.

Collector: FTPFtpColl
FTPftpBytesTotalPerSec Y con undef undef undef set by coll graph bytes per sec

Displays the total rate of bytes transferred by the FTP

server, including those bytes sent and received.

Collector: FTPFtpColl
FTPftpConnectionAttempts Y con undef undef undef set by coll graph number of FTP
connections
Displays the number of FTP connection attempts that
have been made.

Collector: FTPFtpColl
FTPftpCurrAnonymousUsers Y con undef undef undef set by coll graph number of
anonymous users
Displays the number of anonymous users currently
logged into the selected FTP server.

Collector: FTPFtpColl
FTPftpCurrConnections Y con undef undef undef set by coll graph number of
connections
Displays the number ofcurrent connections to the FTP
server.

Collector: FTPFtpColl

PATROL Parameter Reference Manual 775

PATROL Parameter Reference Manual 776

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 92 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
FTPftpCurrNonAnonymousUsers Y con undef undef undef set by coll graph number of users

Displays the number ofusers, excluding anonymous

users, currently logged into the selected FTP server.

Collector: FTPFtpColl
FTPftpFilesRcvd Y con undef undef undef set by coll graph number of files
received
Displays the number offiles received from the FTP
protocol.

Collector: FTPFtpColl
FTPftpFilesSent Y con undef undef undef set by coll graph number of files sent

Displays the number of files sent using the FTP protocol.

Collector: FTPFtpColl
FTPftpFilesTotal Y con undef undef undef set by coll graph number of files sent
and received
Displays the total number of files sent and received using
the FTP protocol.

Collector: FTPFtpColl
FTPftpLoginAttempts Y con undef undef undef set by coll graph number of FTP login
attempts
Displays the number of FTP login attempts that have
been made.

Collector: FTPFtpColl
FTPftpMaxAnonymousUsers Y con undef undef undef set by coll gauge number of
anonymous users
Displays the maximum number of anonymous users
allowed on the selected FTP server.

Collector: FTPFtpColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 93 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
FTPftpMaxConnections Y con undef undef undef set by coll gauge number of
concurrent
Displays the maximum number of concurrent connections
connections that the FTP server can handle.

Collector: FTPFtpColl
FTPftpMaxNonAnonymousUsers Y con undef undef undef set by coll gauge number of users

Displays the maximum number of users, excluding

anonymous users, allowed on the FTP server.

Collector: FTPFtpColl
FTPftpTotalAnonymousUsers Y con undef undef undef set by coll gauge number of
anonymous users
Displays the total number of anonymous users logged on
the FTP server.

Collector: FTPFtpColl
FTPftpTotalNonAnonymousUsers Y con undef undef undef set by coll gauge number of users

Displays the total number of users, excluding anonymous

users, logged into the FTP server.

Collector: FTPFtpColl
NT_HEALTH Application Class
DiskUsage Y con 0–100 90–95 95–100 set by coll graph percentage
active by active by active by
Monitors the cumulative status of system disks. By default default default
default, the DiskUsage parameter enters an alarm state
when disk usage on any of the system disks causes the
NT_LOGICAL_DISKS\LDldFreeSpacePercent parameter
to enter an alarm state.

Collector: HealthCollector

PATROL Parameter Reference Manual 777

PATROL Parameter Reference Manual 778

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 94 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
EventLogErrors Y con 0–0 1–4000 4000–4000 set by coll graph number of errors
inactive by active by inactive by
Monitors the number of event log errors recorded in all of default default default
the monitored event logs. By default, the EventLogErrors
parameter enters an alarm state when the
NT_EVINSTS\ELMError parameter for any of the
monitored event logs enters an alarm state.

Collector: HealthCollector
HealthCollector Y coll NA NA NA 120 sec NA NA

Collects the data and sets the values for the NT_HEALTH
parameters.
HealthSummary Y con NA NA NA set by coll text NA

Displays a text parameter that shows the status of all of

the parameters that the NT_HEALTH parameters gather
data from.

Collector: HealthCollector
MemoryUsage Y con 0–100 80–90 90–100 set by coll graph percentage
active by active by active by
Displays the amount of memory in use. This value is default default default
calculated using the MEMmemAvailableBytes parameter
and the total system memory.

Collector: HealthCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 95 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ProcessorUtilization Y con 0–100 80–90 90–100 set by coll graph NA
active by active by active by
Displays the overall CPU utilization for the server. By default default default
default, the ProcessorUtilization parameter enters an
alarm state when the CPU utilization of any of the system
processors causes the
NT_CPU\CPUprcrProcessorTimePercent parameter to
enter an alarm state.

Collector: HealthCollector
ResourceContention Y con 0–1 1–1 1–1 set by coll Bool NA
inactive by active by inactive by
Monitors the server for resource contention and enters an default default default
alarm state when it detects that multiple threads are
contending for a shared resource and the resource cannot
respond adequately.

The ResourceContention parameter enters an alarm state

when both of these conditions are met:

■ the NT_CPU\CPUprcrPrivTimePercent and the

NT_CPU\CPUprcrUserTimePercent parameters are
above 45%
■ the NT_CPU\CPUprcrProcessorTimePercent
parameter is at 95%
Collector: HealthCollector

PATROL Parameter Reference Manual 779

PATROL Parameter Reference Manual 780

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 96 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
SystemPaging Y con 0–100 80–90 90–100 set by coll graph NA
active by active by active by
Monitors the server for high system paging. The default default default
SystemPaging parameter appears in an alarm state when
system paging is high. System paging is defined as
(NT_MEMORY\MEMmemPagesInputPerSec divided by
NT_MEMORY\MEMmemPageFaultsPerSec) multiplied
by 100.

■ the NT_MEMORY\MEMmemPageFaultsPerSec
parameter is greater than the
NT_MEMORY\MEMmemCacheFaultsPerSec
parameter
■ the NT_MEMORY\MEMmemPagesInputPerSec
divided by the
NT_MEMORY\MEMmemPageFaultsPerSec is
greater than 0.10
Collector: HealthCollector
NT_ICMP Application Class
ICMPIcmpColl Y coll NA NA NA 5 min NA NA

Collects ICMP statistics from the NT ICMP object.

ICMPicmpMessagesOutboundErrors Y con undef undef undef set by coll graph number of ICMP
messages
Displays the number of ICMP messages that this entity
did not send due to problems discovered within ICMP
such as lack of buffers. This value should not include
errors discovered outside the ICMP layer such as the
inability of IP to route the resultant datagram. In some
implementations there may be no types of error that
contribute to this counter's value.

Collector: ICMPIcmpColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 97 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ICMPicmpMessagesPerSec Y con undef undef undef set by coll graph messages per sec

Displays the total rate that ICMP messages are received

and sent by the entity. The rate includes those messages
received or sent in error.

Collector: ICMPIcmpColl
ICMPicmpMessagesRcvdErrors Y con undef undef undef set by coll graph errors

Displays the number of ICMP messages that the entity

received but determined as having errors (bad ICMP
checksums, bad length, etc.).

Collector: ICMPIcmpColl
ICMPicmpMessagesRcvdPerSec Y con undef undef undef set by coll graph messages per sec

Displays the rate that ICMP messages are received by the

entity. The rate includes those messages received in error.

Collector: ICMPIcmpColl
ICMPicmpMessagesSentPerSec Y con undef undef undef set by coll graph messages per sec

Displays the rate at which sending ICMP messages is

attempted by the entity. The rate includes those messages
sent in error.

Collector: ICMPIcmpColl
ICMPicmpRcvdDestUnreachable Y con undef undef undef set by coll graph number of messages

DIsplays the number of ICMP Destination Unreachable

messages received.

Collector: ICMPIcmpColl

PATROL Parameter Reference Manual 781

PATROL Parameter Reference Manual 782

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 98 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_IP Application Class
IPIpColl Y coll NA NA NA 5 min NA NA

Collects TCP/IP statistics.

IPipDatagsForwardedPerSec Y con undef undef undef set by coll graph datagrams per sec

Displays the rate of input datagrams for which this entity

was not their final IP destination, as a result of which an
attempt was made to find a route to forward them to that
final destination. In entities that do not act as IP
Gateways, this rate will include only those packets that
were Source-Routed via this entity, and the Source-Route
option processing was successful.

Collector: IPIpColl
IPipDatagsOutboundDiscarded Y con undef undef undef set by coll graph number of output IP
datagrams
Displays the number of output IP datagrams for which no
problems were encountered to prevent their transmission
to their destination, but which were discarded (for
example, because of lack of buffer space.) This counter
would include datagrams counted in Datagrams
Forwarded if any such packets met this (discretionary)
discard criterion.

Collector: IPIpColl
IPipDatagsOutboundNoRoute Y con undef undef undef set by coll graph number of IP
datagrams discarded
Displays the number of IP datagrams discarded because
no route could be found to transmit them to their
destination. This value includes any packets counted in
Datagrams Forwarded that meet this `no route' criterion.

Collector: IPIpColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 99 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPipDatagsRcvdAddressErrors Y con undef undef undef set by coll graph number of input
datagrams discarded
Displays the number of input datagrams discarded
because the IP address in their IP header's destination
field was not a valid address to be received at this entity.
This value includes invalid addresses (e.g., 0.0. 0.0) and
addresses of unsupported Classes (e.g., Class E). For
entities that are not IP Gateways and therefore do not
forward datagrams, this counter includes datagrams
discarded because the destination address was not a local
address.

Collector: IPIpColl
IPipDatagsRcvdDeliveredPerSec Y con undef undef undef set by coll graph datagrams per sec

Displays the rate that input datagrams are successfully

delivered to IP user-protocols (including ICMP).

Collector: IPIpColl
IPipDatagsRcvdDiscarded Y con undef undef undef set by coll graph number of input IP
datagrams
Displays the number of input IP datagrams for which no
problems were encountered to prevent their continued
processing, but which were discarded (e.g., for lack of
buffer space). This value does not include any datagrams
discarded while awaiting re-assembly.

Collector: IPIpColl

PATROL Parameter Reference Manual 783

PATROL Parameter Reference Manual 784

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 100 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPipDatagsRcvdHeaderErrors Y con undef undef undef set by coll graph number of input
datagrams discarded
Displays the number of input datagrams discarded due to
errors in their IP headers, including bad checksums,
version number mismatch, other format errors, time-to-
live exceeded, errors discovered in processing their IP
options, etc.

Collector: IPIpColl
IPipDatagsRcvdPerSec Y con undef undef undef set by coll graph datagrams per sec

Displays the rates that IP datagrams are received from the

interfaces, including those in error.

Collector: IPIpColl
IPipDatagsRcvdUnknownProtocol Y con undef undef undef set by coll graph number of
locally-addressed
Displays the number of locally-addressed datagrams datagrams
received successfully but discarded because of an
unknown or unsupported protocol.

Collector: IPIpColl
IPipDatagsSentPerSec Y con undef undef undef set by coll graph datagrams per sec

Displays the rate that IP datagrams are supplied to IP for

transmission by local IP user-protocols (including ICMP).
It does not include any datagrams counted in
IPipDatagsForwardedPerSec.

Collector: IPIpColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 101 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPipFragFailures N con undef undef undef set by coll graph number of IP
datagrams discarded
Displays the number of IP datagrams that have been
discarded because they needed to be fragmented at this
entity but could not be, e.g., because their `Don't
Fragment' flag was set. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: IPIpColl
IPipFragedDatagsPerSec N con undef undef undef set by coll graph datagrams per sec

Displays the rate that datagrams are successfully

fragmented at this entity. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: IPIpColl
IPipFragsCreatedPerSec N con undef undef undef set by coll graph fragments per sec

Displays the rate that IP datagram fragments have been

generated as a result of fragmentation at this entity. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: IPIpColl
IPipFragsRcvdPerSec N con undef undef undef set by coll graph fragments per sec

Displays the rate that IP fragments that need to be re-

assembled at this entity are received. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: IPIpColl

PATROL Parameter Reference Manual 785

PATROL Parameter Reference Manual 786

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 102 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPipFragsReassembledPerSec N con undef undef undef set by coll graph fragments per sec

Displays the rate that IP fragments are successfully re-

assembled. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: IPIpColl
IPipFragsReassemblyFailures N con undef undef undef set by coll graph number of failures
detected
Displays the number of failures detected by the IP re-
assembly algorithm (for whatever reason: timed out,
errors, etc.) This is not necessarily a count of discarded IP
fragments since some algorithms (notably RFC 815) can
lose track of the number of fragments by combining them
as they are received. This parameter is inactive by default.
You can activate this parameter from the PATROL
Console KM tab.

Collector: IPIpColl
NT_IPX Application Class
IPXIpxColl Y coll NA NA NA 5 min NA NA

Collects IPX statistics from the IPX performance objects in

the Windows Performance Database.
IPXipxBytesTotalPerSec N con undef undef undef set by coll graph bytes per sec

Displays the frame bytes and datagram bytes per second.

This is the total rate of bytes sent to or received from the
network by the protocol, counting only the bytes in
frames (packets) which carry data. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: IPXIpxColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 103 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPXipxConnectionsCanceled Y con undef undef undef set by coll graph number of
connections
Displays the number of connections that were canceled.

Collector: IPXIpxColl
IPXipxConnectionsNoRetries Y con undef undef undef set by coll graph number of
connections
Displays the number of connections that were
successfully made on the first try.

Collector: IPXIpxColl
IPXipxConnectionsOpen Y con undef undef undef set by coll graph number of
connections
Displays the number of connections currently open for
this protocol.

Collector: IPXIpxColl
IPXipxConnectionSessTimeouts Y con undef undef undef set by coll graph number of
connections
Displays the number of connections that were dropped
due to a session timeout. This number is an accumulator
and shows a running total.

Collector: IPXIpxColl
IPXipxConnectionsWithRetries Y con undef undef undef set by coll graph number of
connections
Displays the number of connections that were made after
retrying the attempt. A retry occurs when the first
connection attempt failed.

Collector: IPXIpxColl

PATROL Parameter Reference Manual 787

PATROL Parameter Reference Manual 788

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 104 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPXipxDatagBytesPerSec N con undef undef undef set by coll graph datagram bytes per
sec
Displays the datagram bytes per second that are
processed by the computer. This number is the sum of
datagrams bytes that are sent or received. A datagram is a
connectionless packet whose delivery to a remote
computer is not guaranteed. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxDatagBytesRcvdPerSec N con undef undef undef set by coll graph datagram bytes per
sec
Displays the datagram bytes per second that are received
by the computer. A datagram is a connectionless packet
whose delivery to a remote computer is not guaranteed.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxDatagBytesSentPerSec N con undef undef undef set by coll graph datagram bytes per
sec
Displays the datagram bytes per second that are sent
from the computer. A datagram is a connectionless
packet whose delivery to a remote computer is not
guaranteed. This parameter is inactive by default. You
can activate this parameter from the PATROL Console
KM tab.

Collector: IPXIpxColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 105 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPXipxDatagsPerSec N con undef undef undef set by coll graph datagrams per sec

Displays the datagrams per second that are processed.

This number is the sum of datagrams sent and received.
A datagram is a connectionless packet whose delivery to
a remote computer is not guaranteed. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxDatagsRcvdPerSec N con undef undef undef set by coll graph datagrams per sec

Displays the datagrams per second that are received by

the computer. A datagram is a connectionless packet
whose delivery to a remote computer is not guaranteed.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxDatagsSentPerSec N con undef undef undef set by coll graph datagrams per sec

Displays the datagrams per second that are sent from the
computer. A datagram is a connectionless packet whose
delivery to a remote computer is not guaranteed. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxDisconnectsLocal N con undef undef undef set by coll graph number of session
disconnections
Displays the number of session disconnections that were
initiated by the local computer. This parameter is inactive
by default. You can activate this parameter from the
PATROL Console KM tab.

Collector: IPXIpxColl

PATROL Parameter Reference Manual 789

PATROL Parameter Reference Manual 790

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 106 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPXipxDisconnectsRemote N con undef undef undef set by coll graph number of session
disconnections
Displays the number of session disconnections that were
initiated by the remote computer. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxExpirationsAck N con undef undef undef set by coll graph number of timer
expirations
Displays the number of T2 timer expirations. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxExpirationsResponse N con undef undef undef set by coll graph number of timer
expirations
Displays the number of T2 timer expirations. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxFailuresAdapter N con undef undef undef set by coll graph number of
connections
Displays the number of connections that were dropped
due to an adapter failure. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: IPXIpxColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 107 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPXipxFailuresLink N con undef undef undef set by coll graph number of
connections
Displays the number of connections that were dropped
due to a link failure. This parameter is inactive by default.
You can activate this parameter from the PATROL
Console KM tab.

Collector: IPXIpxColl
IPXipxFailuresNoListen N con undef undef undef set by coll graph number of
connections
Displays the number of connections that were rejected
because the remote computer was not listening for
connection requests. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxFailuresNotFound N con undef undef undef set by coll graph number of
connections
Displays the number of connection attempts that failed
because the remote computer could not be found. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxFailuresResourceLocal N con undef undef undef set by coll graph number of
connections
Displays the number of connections that failed because of
resource problems or shortages on the local computer.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: IPXIpxColl

PATROL Parameter Reference Manual 791

PATROL Parameter Reference Manual 792

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 108 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPXipxFailuresResourceRemote N con undef undef undef set by coll graph number of
connections
Displays the number of connections that failed because of
resource problems or shortages on the remote computer.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxFrameBytesRcvdPerSec N con undef undef undef set by coll graph data bytes per sec

Displays the data bytes per second received by the

computer. This number only counts the frames (packets)
that carry data. This parameter is inactive by default. You
can activate this parameter from the PATROL Console
KM tab.

Collector: IPXIpxColl
IPXipxFrameBytesRejPerSec N con undef undef undef set by coll graph data bytes per sec

Displays the data bytes per second that are rejected. This
number only counts the bytes in data frames, or packets,
that carry data. This parameter is inactive by default. You
can activate this parameter from the PATROL Console
KM tab.

Collector: IPXIpxColl
IPXipxFrameBytesResentPerSec N con undef undef undef set by coll graph data bytes per sec

Displays the data bytes per second re-sent by the

computer. This number only counts the bytes in frames
that carry data. This parameter is inactive by default. You
can activate this parameter from the PATROL Console
KM tab.

Collector: IPXIpxColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 109 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPXipxFrameBytesPerSec N con undef undef undef set by coll graph data bytes per sec

Displays the data bytes per second that are processed by

the computer. This counter is the sum of data frame bytes
sent and received. This number only counts the frames or
packets that carry data. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxFrameBytesSentPerSec N con undef undef undef set by coll graph data bytes per sec

Displays the data bytes per second that are sent by the
computer. This number only counts the bytes in frames
(packets) that carry data. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxFramesPerSec N con undef undef undef set by coll graph data frames per sec

Displays the data frames (packets) per second that are

processed by the computer. This number only counts the
frames or packets that carry data. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: IPXIpxColl

PATROL Parameter Reference Manual 793

PATROL Parameter Reference Manual 794

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 110 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPXipxFramesRcvdPerSec N con undef undef undef set by coll graph frames per sec

Displays the frames per second that are received by the

computer. This number includes both control and data
frames. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: IPXIpxColl
IPXipxFramesRejPerSec N con undef undef undef set by coll graph data frames per sec

Displays the data frames per second that are rejected.

This number only counts the frames (packets) that carry
data. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: IPXIpxColl
IPXipxFramesResentPerSec N con undef undef undef set by coll graph data frames per sec

Displays the data frames (packets) per second that are re-
sent by the computer. This number only counts the
frames or packets that carry data. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: IPXIpxColl
IPXipxFramesSentPerSec N con undef undef undef set by coll graph data frames per sec

Displays the rate that data frames are sent by the

computer. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: IPXIpxColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 111 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
IPXipxPktsPerSec Y con undef undef undef set by coll graph packets per sec

Displays the rate that packets are processed by the

computer. This count is the sum of Packets Sent and
Packets Received per second. This value includes all
packets processed, control and data.

Collector: IPXIpxColl
IPXipxPktsRcvdPerSec Y con undef undef undef set by coll graph packets per sec

Displays the rate at which the computer receives packets.

This value includes all packets (control and data)
processed.

Collector: IPXIpxColl
IPXipxPktsSentPerSec Y con undef undef undef set by coll graph packets per sec

Displays the rate that packets are sent by the computer.

This value includes all packets (control and data)
processed.

Collector: IPXIpxColl
NT_JOBS_CONTAINER Application Class
JobsObjectColl Y coll NA NA NA 10 min 6 sec none NA

Collects data for all instances of the NT_JOBS application

classes.
NT_JOBS Application Class
JobActiveProcessCount Y con undef undef undef set by coll graph number of active
processes
Displays the number of active processes in the job object.
This parameter is available only on Windows 2000
systems.

Collector: JobsObjectColl

PATROL Parameter Reference Manual 795

PATROL Parameter Reference Manual 796

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 112 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
JobKernelTime Y con undef undef undef set by coll graph sec

Displays job kernel time (in seconds) for the current

period. This parameter is available only on Windows
2000 systems.

Collector: JobsObjectColl
JobPageFaultsPerSec Y con undef undef undef set by coll graph number of page
faults per sec
Displays the number of page faults per second. This
parameter is available only on Windows 2000 systems.

Collector: JobsObjectColl
JobPercentActProcessLimit Y con undef undef undef set by coll graph number of active
processes
Displays the number of active processes in the job object.
This parameter is available only on Windows 2000
systems.

Collector: JobsObjectColl
JobPercentMemoryLimit Y con undef 80–90 90–100 set by coll graph percentage of
warn alarm memory usage vs. job
Displays the memory usage of a job as a percentage of the memory limit
total job memory limit. This parameter is available only
on Windows 2000 systems.

Collector: JobsObjectColl
JobPercentUserTimeLimit Y con undef 80–90 90–100 set by coll graph percentage of total
warn alarm job user time vs. job
Displays the total job user time as a percentage of the job user time limit
user time limit. This parameter is available only on
Windows 2000 systems.

Collector: JobsObjectColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 113 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
JobPrivTimePercent Y con undef undef undef set by coll graph percentage of time

Displays the percentage of total time that the job spent

executing in privileged mode. This parameter is available
only on Windows 2000 systems.

Collector: JobsObjectColl
JobProcessorTime Y con undef undef undef set by coll graph sec

Displays job processor time (in seconds) for this period.

This parameter is available only on Windows 2000
systems.

Collector: JobsObjectColl
JobProcessorTimePercent Y con undef 90–95 95–100 set by coll graph percentage of
warn alarm processor time
Displays the amount of processor time used by a job
versus total processor time. This parameter is available
only on Windows 2000 systems.

Collector: JobsObjectColl
JobRulesChanged Y con undef 1–12 undef set by coll graph number of job rules
alarm changed
Displays the number of changed job rules. This parameter
is available only on Windows 2000 systems.

Collector: JobsObjectColl
JobTerminatedProcessCount Y con undef undef undef set by coll graph number of processes

Displays the number of processes terminated because of a

limit violation. This parameter is available only on
Windows 2000 systems.

Collector: JobsObjectColl

PATROL Parameter Reference Manual 797

PATROL Parameter Reference Manual 798

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 114 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
JobTotalKernelTime Y con undef undef undef set by coll graph sec

Displays the total job kernel time in seconds. This

parameter is available only on Windows 2000 systems.

Collector: JobsObjectColl
JobTotalPageFileSize Y con undef undef undef set by coll graph KB

Displays the total page file size of a job in kilobytes. This

parameter is available only on Windows 2000 systems.

Collector: JobsObjectColl
JobTotalProcessCount Y con undef undef undef set by coll graph number of processes

Displays the total number of processes (active and

terminated) associated with the job. This parameter is
available only on Windows 2000 systems.

Collector: JobsObjectColl
JobTotalProcessorTime Y con undef undef undef set by coll graph sec

Displays the total processor time (in seconds) used by the

job. This parameter is available only on Windows 2000
systems.

Collector: JobsObjectColl
JobTotalUserTime Y con undef undef undef set by coll graph sec

Displays the total user time of a job in seconds. This

parameter is available only on Windows 2000 systems.

Collector: JobsObjectColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 115 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
JobUserTime Y con undef undef undef set by coll graph sec

Displays a job’s user time in seconds for the current

period. This parameter is available only on Windows
2000 systems.

Collector: JobsObjectColl
JobUserTimePercent Y con undef 90–95 95–100 set by coll graph percentage of time
warn alarm
Displays the amount of time a job spent executing in user
mode, versus the total amount of time the job spent
executing. This parameter is available only on Windows
2000 systems.

Collector: JobsObjectColl
NT_JOBS_PROCESS Application Class
PROCDown Y con undef 1–3 3–7 set by coll stoplight NA
warn alarm
Displays the status of a process. This parameter is
available only on Windows 2000 systems.

Collector: JobsObjectColl
PROCHandleCount Y con undef undef undef set by coll graph number of handles

Displays the number of handles associated with a

process. This parameter is available only on Windows
2000 systems.

Collector: JobsObjectColl

PATROL Parameter Reference Manual 799

PATROL Parameter Reference Manual 800

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 116 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PROCIODataBytesPerSec Y con 0–100 0–100 100–100 set by coll graph bytes per sec
inactive by inactive by
Displays the rate at which the process is issuing bytes to default default
I/O operations, including file, network, and device I/O
operations. I/O operations that involve control
operations are not included. This parameter is available
only on Windows 2000 systems.

Collector: JobsObjectColl
PROCIODataOpersPerSec Y con 0–100 0–100 100–100 set by coll graph operations per sec
nactive by inactive by
Displays the rate at which the process is issuing read and default default
write I/O operations, including file, network, and device
I/O operations. This parameter is available only on
Windows 2000 systems.

Collector: JobsObjectColl
PROCIOReadBytesPerSec Y con 0–100 0–100 100–100 set by coll graph bytes per sec
inactive by inactive by
Displays the rate at which the process is issuing read default default
bytes from I/O operations, including file, network, and
device I/O operations. This parameter is available only
on Windows 2000 systems.

Collector: JobsObjectColl
PROCIOReadOpersPerSec Y con 0–100 0–100 100–100 set by coll graph operations per sec
inactive by inactive by
Displays the rate at which the process is issuing read I/O default default
operations, including file, network, and device I/O
operations. This parameter is available only on Windows
2000 systems.

Collector: JobsObjectColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 117 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PROCIOWriteBytesPerSec Y con 0–100 0–100 100–100 set by coll graph operations per sec
inactive by inactive by
Displays the rate at which the process is writing bytes to default default
I/O operations, including file, network, and device I/O
operations. This parameter is available only on Windows
2000 systems.

Collector: JobsObjectColl
PROCIOWriteOpersPerSec Y con 0–100 0–100 100–100 set by coll graph operations per sec
inactive by inactive by
Displays the rate at which the process is issuing write I/O default default
operations, including file, network, and device I/O
operations. This parameter is available only on Windows
2000 systems.

Collector: JobsObjectColl
PROCMemoryLimitExceed Y con undef 1–3 3–7 set by coll stoplight NA
warn alarm
Reports whether the processor memory limit for a job has
been exceeded. This parameter is available only on
Windows 2000 systems.

Collector: JobsObjectColl
PROCPageFaultsPerSec Y con undef undef undef set by coll graph number of page
faults per sec
Displays the number of page faults per second for the
process. This parameter is available only on Windows
2000 systems.

Collector: JobsObjectColl

PATROL Parameter Reference Manual 801

PATROL Parameter Reference Manual 802

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 118 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PROCPageFileBytes Y con undef undef undef set by coll graph KB

Displays the size of the process’s page file, in kilobytes.

This parameter is available only on Windows 2000
systems.

Collector: JobsObjectColl
PROCPercentMemoryLimit Y con undef 80–90 90–100 set by coll graph percentage of
warn alarm memory
Displays the percentage of memory used by the process
versus the total memory limit. This parameter is available
only on Windows 2000 systems.

Collector: JobsObjectColl
PROCPercentUserTimeLImit Y con undef 80–90 90–100 set by coll graph percentage of time
warn alarm
Displays the percentage of time used by the process
versus the user time limit. This parameter is available
only on Windows 2000 systems.

Collector: JobsObjectColl
PROCPrivTimePercent Y con undef 90–95 95–100 set by coll graph percentage of time
warn alarm
Displays the percentage of time that the process spent
executing in privileged mode. This parameter is available
only on Windows 2000 systems.

Collector: JobsObjectColl
PROCProcessorTimePercent Y con undef 90–95 95–100 set by coll graph percentage of
warn alarm processor time
Displays the percentage of processor time used to
complete a process. This parameter is available only on
Windows 2000 systems.

Collector: JobsObjectColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 119 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PROCRunning Y con undef 1–3 3–7 set by coll stoplight NA
warn alarm
Displays the status of a process. This parameter is
available only on Windows 2000 systems.

Collector: JobsObjectColl
PROCStatus Y con undef 1–3 3–7 set by coll stoplight NA
warn alarm
Displays the process status. By tracking this parameter
over time, you can determine when the process went
down or was restarted. This parameter is available only
on Windows 2000 systems.

Collector: JobsObjectColl
PROCThreadCount N con undef undef undef set by coll graph thread count

Displays the thread count for the process. This parameter

is available only on Windows 2000 systems.

Collector: JobsObjectColl
PROCUserTimeLimitExceed Y con undef 1–3 3–7 set by coll stoplight NA
warn alarm
Indicates whether a process exceeded the set user time
limit. This parameter is available only on Windows 2000
systems.

Collector: JobsObjectColl
PROCUserTimePercent Y con undef 90–95 95–100 set by coll graph percentage of time
warn alarm
Displays the percentage of time that a process executed in
user time mode. This parameter is available only on
Windows 2000 systems.

Collector: JobsObjectColl

PATROL Parameter Reference Manual 803

PATROL Parameter Reference Manual 804

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 120 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PROCWorkingSet Y con undef undef undef set by coll graph KB

Displays the working set size (in kilobytes) used by the

process during the polling cycle. This parameter is
available only on Windows 2000 systems.

Collector: JobsObjectColl
NT_LOGICAL_DISKS_CONTAINER Application Class
LDDiskQuotaColl Y coll NA NA NA 10 min NA NA

Collects data for consumer parameters in the

NT_LOGICAL_DISKS application class.
LDLogicalDiskColl Y coll NA NA NA 2 min NA NA

Collects logical disk statistics from the logical disk

performance objects in the Windows Performance
Database.
NT_LOGICAL_DISKS Application Class
LDldDiskQueueLength Y con undef undef undef set by coll gauge number of requests

Displays the number of requests outstanding on the disk,

including requests currently in service. This is an
instantaneous value at the time the data was collected.

Collector: LDLogicalDiskColll
LDldDiskTimePercent Y con 0–100 60%–69% 69%–100% set by coll graph percentage of elasped
alarm outside warn alarm time
Displays the percentage of elapsed time that the selected of border
disk drive is busy servicing read or write requests.

Collector: LDLogicalDiskColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 121 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
LDldFreeMegabytes Y con undef undef undef set by coll graph amount of unused
space in MB
Displays the amount of unused space on the disk drive in
megabytes (MB). Applications that write to drives with
limited space can cause operating system stress and
possible failures. By default, PATROL takes no action
when this parameter displays an alarm or warning.

Collector: LDLogicalDiskColl
LDldFreeSpacePercent Y con 0–100 0%–5% 5%–10% set by coll gauge percentage of free
alarm outside alarm warn space
Displays the percentage of free space available on the of border
selected logical disk. Applications that write to drives
with limited space can cause operating system stress and
possible failures. This parameter contains a recovery
action that automatically clears the temp directory when
LdldFreeSpacePercent enters an alarm state.

Collector: LDLogicalDiskColl
LDldIdleTimePercent Y con undef 0–10 10–20 set by coll graph percentage of time
alarm warn the disk was idle vs.
Displays the percentage of time that the disk was idle. the total time
monitored
Collector: LDLogicalDiskColl
NT_MEMORY Application Class
MEMMemoryColl Y coll NA NA NA 30 sec NA NA

Collects memory statistics from the memory performance

objects in the Windows Performance Database.

PATROL Parameter Reference Manual 805

PATROL Parameter Reference Manual 806

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 122 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MEMmemAvailableBytes Y con undef undef undef set by coll graph MB

Displays the number of megabytes of physical memory

currently available to processes, but is not related to the
amount of physical memory installed in your server.

The value of MEMmemAvailableBytes is calculated by

adding the space on the Zeroed, Free, and Standby
memory lists. Zeroed memory is filled with zeros to
prevent later processes from seeing data used by a
previous process. Free memory is ready for use by any
process. Standby memory has been removed from a
process's working set on route to disk but is still available
for recall.

Collector: MEMMemoryColl
MEMmemCacheBytes N con undef undef undef set by coll graph MB

Displays the number of megabytes currently in use by the

system cache. The system cache is used to buffer data
retrieved from disk or LAN. The system cache uses
memory not in use by active processes in the computer.

Collector: MEMMemoryColl
MEMmemCacheFaultsPerSec N con undef undef undef set by coll graph sec

Displays the frequency of cache faults. Cache faults occur

whenever the cache manager does not find a file's page in
the immediate cache.

Collector: MEMMemoryColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 123 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
MEMmemPageFaultsPerSec Y con undef undef undef set by coll graph number of page
faults per sec
Displays the number of hard and soft page faults in the
processor.

Collector: MEMMemoryColl
MEMmemPagesInputPerSec N con undef undef undef set by coll graph number of pages per
sec
Displays the number of pages read from the disk to
resolve memory references to pages that were not in
memory at the time of the reference. This parameter also
includes paging activity incurred by the system cache
accessing file data for applications. This activity is
referred to as hard page faults.

Collector: MEMMemoryColl
MEMmemPagesOutputPerSec N con undef undef undef set by coll graph number of pages per
sec
Displays the number of pages written to disk because the
pages have been modified in main memory.

Collector: MEMMemoryColl
MEMmemPagesPerSec Y con undef undef undef set by coll graph number of pages per
sec
Displays the number of hard page faults for the
processor, and the value often determines whether or not
your system needs more RAM.

The number of hard page faults is equal to the number of

pages read from, or written to, disk to resolve memory
references to pages that were not in memory at the time
of the reference. The parameter’s value is the sum of the
MEMmemPagesInputPerSec and
MEMmemPagesOutputPerSec parameters.

Collector: MEMMemoryColl

PATROL Parameter Reference Manual 807

PATROL Parameter Reference Manual 808

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 124 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_NETBEUI Application Class
BEUNetBEUIColl Y coll NA NA NA 5 min NA NA

Collects NetBEUI statistics from the NetBEUI

performance objects in the Windows Performance
Database.
BEUbeuBytesTotalPerSec N con undef undef undef set by coll graph bytes per sec

Displays the total rate of bytes sent to or received from

the network, including only the packets that carry data.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuConnectionsCanceled Y con undef undef undef set by coll graph number of canceled
connections
Displays the number of connections canceled.

Collector: BEUNetBEUIColl
BEUbeuConnectionSessTimeouts Y con undef undef undef set by coll graph number of dropped
connections
Displays the number of connections that were dropped
because the current session timed out.

Collector: BEUNetBEUIColl
BEUbeuConnectionsNoRetries Y con undef undef undef set by coll graph number of successful
connections
Displays the number of connections that were successful
on the first try.

Collector: BEUNetBEUIColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 125 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BEUbeuConnectionsOpen Y con undef undef undef set by coll graph number of open
connections
Displays the number of connections that are currently
open.

Collector: BEUNetBEUIColl
BEUbeuConnectionsWithRetries Y con undef undef undef set by coll graph number of
connections
Displays the total count of connections that were made
after retrying the attempt. A retry occurs when the first
connection attempt failed. This value is a running total.

Collector: BEUNetBEUIColl
BEUbeuDatagBytesPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate that datagram bytes are processed by

the computer. This value is the sum of datagram bytes
that are sent and received. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuDatagBytesRcvdPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate that datagram bytes are received by the

computer. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BEUNetBEUIColl

PATROL Parameter Reference Manual 809

PATROL Parameter Reference Manual 810

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 126 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BEUbeuDatagBytesSentPerSec Y con undef undef undef set by coll graph bytes per sec

Displays the rate that datagram bytes are sent from the
computer.

Collector: BEUNetBEUIColl
BEUbeuDatagsPerSec N con undef undef undef set by coll graph datagrams per sec

Displays the rate that datagrams are processed by the

computer. This value is the sum of datagrams that are
sent and received. This parameter is inactive by default.
You can activate this parameter from the PATROL
Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuDatagsRcvdPerSec N con undef undef undef set by coll graph datagrams per sec

Displays the rate at which the computer receives

datagrams. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BEUNetBEUIColl
BEUbeuDisconnectsLocal N con undef undef undef set by coll graph number of
disconnected
Displays the number of disconnected sessions that were sessions
initiated by the local computer. This parameter is inactive
by default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BEUNetBEUIColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 127 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BEUbeuDisconnectsRemote N con undef undef undef set by coll graph number of
disconnected
Displays the number of disconnected sessions that were sessions
initiated by a remote computer. This parameter is inactive
by default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuFailuresAdapter N con undef undef undef set by coll graph number of rejected
connections
Displays the number of connections that were rejected as
a result of a failed adapter. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuFailuresLink N con undef undef undef set by coll graph number of rejected
connections
Displays the number of connections that were rejected as
a result of a failed link. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuFailuresNoListen N con undef undef undef set by coll graph number of failed
connections
Displays the number of connections that failed because
the remote computer was not listening for connection
requests. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BEUNetBEUIColl

PATROL Parameter Reference Manual 811

PATROL Parameter Reference Manual 812

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 128 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BEUbeuFailuresNotFound N con undef undef undef set by coll graph number of failed
connections
Displays the number of connections that failed because
the remote computer could not be found. This parameter
is inactive by default. You can activate this parameter
from the PATROL Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuFailuresResourceLocal N con undef undef undef set by coll graph number of failed
connections
Displays the number of connections that failed due to
resource problems or shortages on the local computer.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuFailuresResourceRemote N con undef undef undef set by coll graph number of failed
connections
Displays the number of connections that failed due to
resource problems or shortages on the remote computer.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuFrameBytesPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate that data bytes are processed by the

computer. This value is the sum of data frame bytes sent
and received. This parameter is inactive by default. You
can activate this parameter from the PATROL Console
KM tab.

Collector: BEUNetBEUIColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 129 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BEUbeuFrameBytesRcvdPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate at which the computer receives data

bytes. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BEUNetBEUIColl
BEUbeuFrameBytesRejPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate at which the computer rejected data

bytes. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BEUNetBEUIColl
BEUbeuFrameBytesResentPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate that data bytes are resent by the

computer. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BEUNetBEUIColl
BEUbeuFrameBytesSentPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate that data bytes are sent by the computer.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: BEUNetBEUIColl

PATROL Parameter Reference Manual 813

PATROL Parameter Reference Manual 814

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 130 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BEUbeuFramesPerSec N con undef undef undef set by coll graph frames per sec

Displays the rate at which the computer processes data

frames. This value is the sum of data frames that are sent
and received. This parameter is inactive by default. You
can activate this parameter from the PATROL Console
KM tab.

Collector: BEUNetBEUIColl
BEUbeuFramesRcvdPerSec N con undef undef undef set by coll graph frames per sec

Displays the rate at which the computer receives data

frames. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BEUNetBEUIColl
BEUbeuFramesRejPerSec N con undef undef undef set by coll graph frames per sec

Displays the rate that data frames, or packets, are rejected

by the computer. This parameter is inactive by default.
You can activate this parameter from the PATROL
Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuFramesResentPerSec N con undef undef undef set by coll graph frames per sec

Displays the rate that data frames, or packets, are resent

by the computer. This parameter is inactive by default.
You can activate this parameter from the PATROL
Console KM tab.

Collector: BEUNetBEUIColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 131 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BEUbeuFramesSentPerSec N con undef undef undef set by coll graph frames per sec

Displays the rate that data frames are sent by the

computer. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BEUNetBEUIColl
BEUbeuPiggybackAckQuePerSec N con undef undef undef set by coll graph piggybacked
acknowledgement
Displays the rate that piggybacked acknowledgements per sec
are queued. A piggyback acknowledgement is an
acknowledgement to a received packet that is sent along
in an outgoing packet to the remote computer. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuPiggybackAckTimeouts N con undef undef undef set by coll graph piggybacked
acknowledgement
Displays the number of times that a piggyback per sec
acknowledgment could not be sent because there was no
outgoing packet to the remote on which to piggyback.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuPktsPerSec Y con undef undef undef set by coll graph packets per sec

Displays the rate at which the computer processes

packets. This value is the sum of data and control packets
that are sent and received.

Collector: BEUNetBEUIColl

PATROL Parameter Reference Manual 815

PATROL Parameter Reference Manual 816

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 132 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BEUbeuPktsRcvdPerSec Y con undef undef undef set by coll graph packets per sec

Displays the rate at which the computer receives packets.

This value is the sum of data and control packets.

Collector: BEUNetBEUIColl
BEUbeuPktsSentPerSec Y con undef undef undef set by coll graph packets per sec

Displays the rate that packets are sent by the computer.

This value is the sum of data and control packets.

Collector: BEUNetBEUIColl
BEUbeuWindowSendAve N con undef undef undef set by coll graph average of data bytes

Displays the running average number of data bytes that

were sent before waiting for an acknowledgment from
the remote computer. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BEUNetBEUIColl
BEUbeuWindowSendMaximum N con undef undef undef set by coll graph number of data bytes

Displays the maximum number of data bytes that will be

sent before waiting for an acknowlegment from the
remote computer. This parameter is inactive by default.
You can activate this parameter from the PATROL
Console KM tab.

Collector: BEUNetBEUIColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 133 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_NETBIOS Application Class
BIONetBIOSColl Y coll NA NA NA 5 min NA NA

Collects NetBios statistics from the NWLink NetBIOS

performance objects in the Windows Performance
Database.
BIObioBytesTotalPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate of bytes sent to or received from the

network, but only counts the bytes in frames, or packets,
that carry data. This parameter is inactive by default. You
can activate this parameter from the PATROL Console
KM tab.

Collector: BIONetBIOSColl
BIObioConnectionSessTimeouts Y con undef undef undef set by coll graph number of dropped
connections
Displays the number of connections that were dropped
due to a session timeout.

Collector: BIONetBIOSColl
BIObioConnectionsCanceled Y con undef undef undef set by coll graph number of canceled
connections
Displays the number of connections that were canceled.

Collector: BIONetBIOSColl
BIObioConnectionsNoRetries Y con undef undef undef set by coll graph number of successful
connections
Displays the total number of connections that were
successfully made on the first try.

Collector: BIONetBIOSColl

PATROL Parameter Reference Manual 817

PATROL Parameter Reference Manual 818

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 134 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BIObioConnectionsOarepen Y con undef undef undef set by coll graph number of open
connections
Displays the number of connections currently open for
this protocol.

Collector: BIONetBIOSColl
BIObioConnectionsWithRetries N con undef undef undef set by coll graph number of
connections
Displays the number of connections that were made after
retrying the attempt. A retry occurs when the first
connection attempt failed. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioDatagBytesPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate that datagram bytes are processed by

the computer. This value is the sum of datagram bytes
that are sent and received. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioDatagBytesRcvdPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate that datagram bytes are received by the

computer. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BIONetBIOSColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 135 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BIObioDatagBytesSentPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate that datagram bytes are sent from the
computer. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BIONetBIOSColl
BIObioDatagsPerSec N con undef undef undef set by coll graph datagrams per sec

Displays the rate at which the computer processes

datagrams. This value is the sum of datagrams that are
sent and received.This parameter is inactive by default.
You can activate this parameter from the PATROL
Console KM tab.

Collector: BIONetBIOSColl
BIObioDatagsRcvdPerSec N con undef undef undef set by coll graph datagrams per sec

Displays the rate at which the computer receives

datagrams. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BIONetBIOSColl
BIObioDatagsSentPerSec N con undef undef undef set by coll graph datagrams per sec

Displays the rate that datagrams are sent from the

computer. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BIONetBIOSColl

PATROL Parameter Reference Manual 819

PATROL Parameter Reference Manual 820

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 136 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BIObioDisconnectsLocal N con undef undef undef set by coll graph number of session
disconnections
Displays the number of session disconnections that were
initiated by the local computer. This parameter is inactive
by default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioDisconnectsRemote N con undef undef undef set by coll graph number of session
disconnections
Displays the number of session disconnections that were
initiated by the remote computer. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioExpirationsAck N con undef undef undef set by coll graph number of T2 timer
expirations
Displays the count of T2 timer expirations. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioExpirationsResponse N con undef undef undef set by coll graph number of T1 timer
expirations
Displays the count of T1 timer expirations. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: BIONetBIOSColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 137 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BIObioFailuresAdapter N con undef undef undef set by coll graph number of dropped
connections
Displays the number of connections that were dropped
due to an adapter failure. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioFailuresLink N con undef undef undef set by coll graph number of dropped
connections
Displays the number of connections that were dropped
due to a link failure. This parameter is inactive by default.
You can activate this parameter from the PATROL
Console KM tab.

Collector: BIONetBIOSColl
BIObioFailuresNoListen N con undef undef undef set by coll graph number of rejected
connections
Displays the number of connections that were rejected
because the remote computer was not listening for
connection requests. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioFailuresNotFound N con undef undef undef set by coll graph number of failed
connections
Displays the number of connection attempts that failed
because the remote computer could not be found. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: BIONetBIOSColl

PATROL Parameter Reference Manual 821

PATROL Parameter Reference Manual 822

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 138 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BIObioFailuresResourceLocal N con undef undef undef set by coll graph number of failed
connections
Displays the number of connections that failed because of
resource problems or shortages on the local computer.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioFailuresResourceRemote N con undef undef undef set by coll graph number of failed
connections
Displays the number of connections that failed because of
resource problems or shortages on the remote computer.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioFrameBytesPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate at which the computer processes data

bytes. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BIONetBIOSColl
BIObioFrameBytesRcvdPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate at which the computer receives data

bytes. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BIONetBIOSColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 139 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BIObioFrameBytesRejPerSec N con undef undef undef set by coll graph bytes per sec

Displays the number of data bytes per second that are

rejected. This value only counts the bytes in data frames
(packets) that carry data. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioFrameBytesResentPerSec Y con undef undef undef set by coll graph frames per sec

Displays the rate that data bytes are re-sent by the

computer. This value only counts the bytes in frames that
carry data.

Collector: BIONetBIOSColl
BIObioFrameBytesSentPerSec N con undef undef undef set by coll graph frames per sec

Displays the rate that data bytes are sent by the computer.
This parameter is inactive by default. You can activate
this parameter from the PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioFramesPerSec N con undef undef undef set by coll graph frames per sec

Displays the rate that data frames are processed by the

computer. This value is the sum of data frames that are
sent and received. This parameter is inactive by default.
You can activate this parameter from the PATROL
Console KM tab.

Collector: BIONetBIOSColl

PATROL Parameter Reference Manual 823

PATROL Parameter Reference Manual 824

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 140 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BIObioFramesRcvdPerSec N con undef undef undef set by coll graph frames per sec

Displays the rate that data frames are received by the

computer. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BIONetBIOSColl
BIObioFramesRejPerSec N con undef undef undef set by coll graph frames per sec

Displays the rate that data frames are rejected. This

parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioFramesResentPerSec N con undef undef undef set by coll graph frames per sec

Displays the number of data frames (packets) per second

that are re-sent by the computer. This value only counts
the frames or packets that carry data. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: BIONetBIOSColl
BIObioFramesSentPerSec N con undef undef undef set by coll graph frames per sec

Displays the rate that data frames are sent by the

computer. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: BIONetBIOSColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 141 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
BIObioPktsPerSec Y con undef undef undef set by coll graph packets per sec

Displays the rate that Redirector is processing data

packets. One packet usually includes many bytes.
Hopefully each packet has protocol overhead. You can
determine the efficiency of this path by dividing the
Bytes/sec by this counter to determine the average
number of bytes transferred/packet. You can also divide
this counter by Operations/sec to determine the average
number of packets per operation, another measure of
efficiency.

Collector: BIONetBIOSColl
BIObioPktsRcvdPerSec Y con undef undef undef set by coll graph frames per sec

Displays the rate that packets are received by the

computer. This counter is the sum of data and control
packets.

Collector: BIONetBIOSColl
BIObioPktsSentPerSec Y con undef undef undef set by coll graph packets per sec

Displays the rate that packets are sent by the computer.

This counter is the sum of data and control packets.

Collector: BIONetBIOSColl
NT_NETWORK Application Class
NETNetworkInterfaceColl Y coll NA NA NA 5 min NA NA

Collects network interface statistics from the network

interface performance objects in the Windows
Performance Database.

PATROL Parameter Reference Manual 825

PATROL Parameter Reference Manual 826

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 142 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NETniBytesRcvdPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate that bytes are received on the interface;

this rate includes framing characters. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: NETNetworkInterfaceColl
NETniBytesSentPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate that bytes are sent on the interface; this
rate includes framing characters. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: NETNetworkInterfaceColl
NETniBytesTotalPerSec N con undef undef undef set by coll graph bytes per sec

Displays the rate that bytes are sent and received on the
interface; this rate includes framing characters. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: NETNetworkInterfaceColl
NETniCurrentBandwidth N con undef undef undef set by coll graph bits per sec

Displays an estimate of the computer’s current

bandwidth in bits per second (bps). This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: NETNetworkInterfaceColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 143 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NETniOutputQueueLength N con undef undef undef set by coll graph length in packets

Displays the length in packets of the output packet queue

and can indicate network bottlenecks. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: NETNetworkInterfaceColl
NETniPktsOutboundErrors Y con undef undef undef set by coll graph errors

Displays the outbound packets that could not be sent as a

result of errors.

Collector: NETNetworkInterfaceColl
NETniPcktsPerSec Y con undef undef undef set by coll graph packets per sec

Displays the rate that packets are sent and received on the
network.

Collector: NETNetworkInterfaceColl
NETniPcktsRcvdPerSec Y con undef undef undef set by coll graph packets per sec

Displays the rate that packets are received on the

network.

Collector: NETNetworkInterfaceColl
NETniPcktsSentPerSec Y con undef undef undef set by coll graph packets per sec

Displays the rate that packets are sent on the network.

Collector: NETNetworkInterfaceColl

PATROL Parameter Reference Manual 827

PATROL Parameter Reference Manual 828

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 144 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NETniPktsRcvdErrors Y con undef undef undef set by coll graph errors

Displays the inbound packets that contained errors. As a

result, the error packets were not delivered to a higher-
layer protocol.

Collector: NETNetworkInterfaceColl
NT_NTFS_JOURNAL Application Class
LDJournalStatistics Y con NA NA NA set by coll text NA

Displays statistics for the journal change instance.

Collector: NA
NT_NTFS_MOUNT Application Class
LDldDiskQueueLength Y con undef undef undef set by coll gauge number of requests

Displays the number of requests outstanding on the disk,

including requests currently in service. This is an
instantaneous value at the time the data was collected.

Collector: LDLogicalDiskColll
LDldDiskTimePercent Y con 0–100 60%–69% 69%–100% set by coll graph percentage of elasped
alarm outside warn alarm time
Displays the percentage of elapsed time that the selected of border
disk drive is busy servicing read or write requests.

Collector: LDLogicalDiskColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 145 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
LDldFreeMegabytes Y con undef undef undef set by coll graph amount of unused
space in MB
Displays the amount of unused space on the disk drive in
megabytes (MB). Applications that write to drives with
limited space can cause operating system stress and
possible failures. By default, PATROL takes no action
when this parameter displays an alarm or warning.

Collector: LDLogicalDiskColl
LDldFreeSpacePercent Y con 0–100 0%–5% 5%–10% set by coll gauge percentage of free
alarm outside alarm warn space
Displays the percentage of free space available on the of border
selected logical disk. Applications that write to drives
with limited space can cause operating system stress and
possible failures. This parameter contains a recovery
action that automatically clears the temp directory when
LdldFreeSpacePercent enters an alarm state.

Collector: LDLogicalDiskColl
LDldIdleTimePercent Y con undef 0–10 10–20 set by coll graph percentage of time
alarm warn the disk was idle vs.
Displays the percentage of time that the disk was idle. the total time
monitored
Collector: LDLogicalDiskColl
NT_NTFS_QUOT A Application Class
LDQuotaPercentageUsed Y con 0–10 70–80 80–100 set by coll graph percentage of user’s
alarm warn alarm disk quota that has
Displays the percentage of user disk quota that has been been used vs. total
used. disk quota for the
user
Collector: LDDiskQuotaColl

PATROL Parameter Reference Manual 829

PATROL Parameter Reference Manual 830

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 146 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
LDQuotaUserInformation Y con NA NA NA set by coll text NA

Displays the disk quota user information.

Collector: LDDiskQuotaColl
LDQuotaUserQuotaUsed Y con undef undef undef set by coll graph MB

Displays the amount (in megabytes) of user disk quota

that has been used.

Collector: LDDiskQuotaColl
NT_OBJECT Application Class
SYSObjectsColl Y coll NA NA NA 1 min NA NA

Collects object statistics from the object performance

objects in the Windows Performance Database.
NT_PAGEFILE Application Class
PAGEBadConfiguration N con NA NA NA set by coll text NA
unless
A text parameter that displays error messages when the KM
total page size is smaller than the real memory in the discovery
system. If the real memory on the system is 2GB or detects
greater, the PAGEBadConfiguration parameter is not “yes”
active. To disable this parameter, set the following condition
pconfig variable as shown:

/NTOSKM/Pagefile/page_bad_config_switch = “no”

Collector: PAGEPageColl
PAGEPageColl Y coll NA NA NA 1 min NA NA

Collects paging statistics from the paging file

performance objects in the Windows Performance
Database.
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 147 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PAGEpgUsagePercent Y con 0–100 90%–95% 95%–100% set by coll graph percentage of page
warn alarm file
Displays the percentage of the page file currently in use.

Collector: PAGEPageColl
PAGEpgUsagePercentTotal Y con 0–100 90–95 95–100 set by coll graph percentage of page
active by active by active by file
Displays the percentage of the page file currently in use. default default default
This value is an average percentage of all the page files on
the system. The parameter PAGEpgUsagePercent shows
individual page file usage.

Collector: PAGEPageColl
NT_PHYSICAL_DISKS Application Class
PDMissingPerfObject Y con undef undef undef set by coll text NA

Displays text data about the missing physical disk

performance object

Collector: PDPhysicalDiskColl
PDPhysicalDiskColl Y coll NA NA NA 2 min NA NA

Collects physical disk statistics from the physical disk

performance objects in the Windows Performance
Database.
PDpdDiskQueueLength Y con undef undef undef set by coll graph number of
outstanding requests
Displays the number of requests outstanding on the disk
at the time the performance data is collected.

Collector: PDPhysicalDiskColl

PATROL Parameter Reference Manual 831

PATROL Parameter Reference Manual 832

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 148 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PDpdDiskTimePercent Y con 0–100 90%–95% 95%–100% set by coll graph percentage of time
alarm outside warn alarm
Displays the percentage of elapsed time that the disk of border
spends servicing read or write requests. Good disk
performance enhances virtual memory performance and
reduces the elapsed time required to load programs that
perform a large number of I/O requests. Disk
performance may be impacted by a shortage of physical
memory.

Collector: PDPhysicalDiskColl
NT_PRINTER_CONTAINER Application Class
NtprColl Y coll NA NA NA 5 min NA NA

Collects printer statistics.

NT_PRINTER Application Class
PrAccessFailed N con NA 8–10 10–16 set by coll stoplight status
active warn alarm
Displays a stoplight indicating that access to the printer only if the
failed. This parameter is not displayed if the printer was problem
accessed successfully. is
detected
Collector: NtprColl
PrAverageNumberOfPages Y con NA NA NA set by coll graph NA

Displays the average number of pages for jobs that are

currently in a print queue.

Collector: NtprColl
PrCreated N con 0–1 0–1 1–1 set by coll stoplight NA
inactive by active by
Monitors when a new printer is created for the host. default default

Collector: NtprColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 149 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PrDestroyed N con 0–1 0–1 1–1 set by coll stoplight NA
inactive by active by
Monitors when a new printer is removed from the host. default default

Collector: NtprColl
PrError N con NA 8–10 10–16 set by coll stoplight status
active warn alarm
Displays a stoplight indicating that the printer is in an only if the
error state. This parameter is not displayed if the printer condition
is not in error. is met

Collector: NtprColl
PrJobStalled N con undef 8–10 10–16 set by coll stoplight status
active warn alarm
Displays a stoplight indicating that one or more jobs have only if the
been in the printer queue longer than the WARN or problem
ALARM threshold. If the printer is offline, PATROL does is
not display this parameter. The default WARN and detected
ALARM thresholds are 2 and 4 hours respectively. To
change the WARN or ALARM thresholds, right click the
top-level NT_PRINTER_CONTAINER application and
choose KM Commands => Alarm Threshold from the
pop-up menu.

Collector: NtprColl
PrNumberOfJobs Y con undef 20–40 40–100 set by coll graph number of queued
warn alarm jobs
Displays the number of jobs currently queued on a
printer.

Collector: NtprColl

PATROL Parameter Reference Manual 833

PATROL Parameter Reference Manual 834

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 150 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PrOffline Y con NA 8–10 10–16 set by coll stoplight status
warn alarm
Displays a stoplight indicating that the printer is offline.
This parameter is not displayed if the printer is not
online.

Collector: NtprColl
PrOnline N con NA 8–10 10–16 set by coll stoplight status
active warn alarm
Displays a stoplight indicating that the printer is online. only if the
This parameter is not displayed if the printer is not problem
online. is
detected
Collector: NtprColl
PrOtherStatus Y con Alarms if status NA NA set by coll text NA
is not OK
Displays a text message if the printer status is not
indicated by one of the stoplight printer parameters; that
is, PrAccessFailed, PrError, PrOffline,
PrOnline, or PrOutofPaper.

Collector: NtprColl
PrOutofPaper N con NA 8–10 11–16 set by coll stoplight status
active warn alarm
Displays a stoplight indicating that the printer is out of only if the
paper. This parameter is not displayed if the printer is not problem
out of paper. is
detected
Collector: NtprColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 151 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PrPaused N con NA 8–10 10–16 set by coll stoplight status
active warn alarm
Displays a stoplight indicating that the printer is paused. only if the
This parameter is not displayed if the printer is not problem
paused. is
detected
Collector: NtprColl
PrPendingDeletion N con NA 8–10 10–16 set by coll stoplight status
active warn alarm
Displays a stoplight indicating that the printer has only if the
pending deletion of jobs. This parameter is not displayed problem
if the printer is not in a pending deletion state. is
detected
Collector: NtprColl
PrServerUnknown N con NA 8–10 10–16 set by coll stoplight status
active warn alarm
Displays a text message indicating that a printer could only if the
not be found, or that the printer name is unknown. problem
is
Collector: NtprColl detected
PrStatus Y con 1–16 8–10 10–16 set by coll graph NA
alarm outside warn alarm
Displays the current status of a printer. of border

Collector: NtprColl
NT_PROCESS Application Class
PROCDown Y con NA 1 NA set by coll stoplight NA
alarm
Indicates that the associated process is not running. This
parameter appears and is active only when the associated
process is down (not running).

Collector: PROCProcessColl

PATROL Parameter Reference Manual 835

PATROL Parameter Reference Manual 836

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 152 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PROCIODataBytesPerSec Y con 0–100 0–100 100–100 set by coll graph bytes per sec
inactive by inactive by
Displays the rate at which the process is issuing bytes to default default
I/O operations, including file, network, and device I/O
operations. I/O operations that involve control
operations are not included. This parameter is available
only on Windows 2000 systems.

Collector: PROCProcessColl
PROCIODataOpersPerSec Y con 0–100 0–100 100–100 set by coll graph operations per sec
inactive by inactive by
Displays the rate at which the process is issuing read and default default
write I/O operations, including file, network, and device
I/O operations. This parameter is available only on
Windows 2000 systems.

Collector: PROCProcessColl
PROCIOReadBytesPerSec Y con 0–100 0–100 100–100 set by coll graph bytes per sec
inactive by inactive by
Displays the rate at which the process is issuing read default default
bytes from I/O operations, including file, network, and
device I/O operations. This parameter is available only
on Windows 2000 systems.

Collector: PROCProcessColl
PROCIOReadOpersPerSec Y con 0–100 0–100 100–100 set by coll graph operations per sec
inactive by inactive by
Displays the rate at which the process is issuing read I/O default default
operations, including file, network, and device I/O
operations. This parameter is available only on Windows
2000 systems.

Collector: PROCProcessColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 153 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PROCIOWriteBytesPerSec Y con 0–100 0–100 100–100 set by coll graph operations per sec
inactive by inactive by
Displays the rate at which the process is writing bytes to default default
I/O operations, including file, network, and device I/O
operations. This parameter is available only on Windows
2000 systems.

Collector: PROCProcessColl
PROCIOWriteOpersPerSec Y con 0–100 0–100 100–100 set by coll graph operations per sec
inactive by inactive by
Displays the rate at which the process is issuing write default default
I/O operations, including file, network, and device I/O
operations. This parameter is available only on Windows
2000 systems.

Collector: PROCProcessColl
PROCPageFaultsPerSec Y con undef undef undef set by coll graph sec

Displays the number of page faults per second by the

threads executing in this process. A page fault occurs
when a thread refers to a virtual memory page that is not
in its working set in main memory.

Collector: PROCProcessColl
PROCPageFileBytes Y con undef undef undef set by coll graph MB

Displays the current number of bytes this process has

used in the paging file.

Collector: PROCProcessColl

PATROL Parameter Reference Manual 837

PATROL Parameter Reference Manual 838

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 154 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PROCPrivTimePercent Y con undef 90%–95% 95%–100% set by coll graph percentage of time
warn alarm
Displays the percentage of elapsed time that this process's
threads have spent executing code in privileged mode.

Collector: PROCProcessColl
PROCProcessColl Y coll NA NA NA 5 min NA NA

Collects process statistics from the process performance

objects in the Windows Performance Database.
PROCProcessorTimePercent Y con 0–100 90%–95% 95%–100% set by coll graph percentage of time
warn alarm
Displays the percentage of elapsed time the selected
process used the processor to execute instructions. Use
this parameter to learn the distribution of processor time
between processes. This parameter contains a recovery
action that automatically attempts to kill a process when
PROCProcessorTimePercent is in alarm for a specified
amount of time.

Collector: PROCProcessColl
PROCRunning Y con NA 1–2 NA set by coll stoplight NA
alarm
Indicates that the associated process is running. This
parameter appears and is active only when the associated
process is running.

Collector: PROCProcessColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 155 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PROCStatus Y con NA 1–2 2–2 set by coll graph NA
alarm
Displays the status of the associated process. This
parameter has the following values:

■ 0– indicates that the process is running

■ 1– indicates that the process is down
■ 2– process is running, but this is an undesirable state
and warrants an alarm
Collector: PROCProcessColl
PROCThreadCount N con undef undef undef set by coll graph number of threads

Displays the number of threads currently active in this

process. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: PROCProcessColl
PROCUserTimePercent Y con undef 90%–95% 95%–100% set by coll graph percentage of time
warn alarm
Displays the percentage of elapsed time that this process's
threads have spent executing code in user mode.

Collector: PROCProcessColl
PROCWorkingSet Y con undef undef undef set by coll graph MB

Displays the current number of bytes in the working set

of this process. The working set is the set of memory
pages touched recently by the threads in the process.

Collector: PROCProcessColl

PATROL Parameter Reference Manual 839

PATROL Parameter Reference Manual 840

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 156 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_PROCESS_CONTAINER Application Class
PROCTopProcs Y con undef undef undef set by coll text NA

Displays the 10 processes that use the most CPU time.

The parameter is updated in each polling cycle. The
process list is added to the annotations for
PROCprocProcessorTimePercent for alarm and warning
states.

Collector: PROCProcessColl
NT_PROCESS_GROUP Application Class
PROCActiveProcessCount Y con undef undef undef set by coll graph number of active
processes
Displays the number of the active processes in the process
group.

Collector: PROCProcessColl
NT_REGISTRY Application Class
RegistryCollector Y coll NA NA NA 10 min NA NA

Collects data for NT_REGISTRY consumer parameters.

RegQuotaInUsePercent Y con undef 80%–90% 90%–100% set by coll graph percentage of
warn alarm Registry quota
Displays the percentage of Registry quota being used. If
the value of this parameter is consistently higher than the
Warning threshold, you should increase the maximum
size of the Registry.

Collector: RegistryCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 157 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_REGISTRY_GROUP Application Class
Report Y con NA NA NA set by coll text NA

Reports all update activities of the keys in the group.

Collector: RegistryCollector
Total_RegSetValue Y con 0–4000 1–10 11–4000 set by coll graph occurrences
alarm outside warn alarm
Tracks set value activities of the keys in the group. of border

Collector: RegistryCollector
Total_RegDeleteValue Y con 0–4000 1–10 11–4000 set by coll graph occurrences
alarm outside warn alarm
Tracks delete value activities of the keys in the group. of border

Collector: RegistryCollector
Total_RegCreateKey Y con 0–4000 1–10 11–4000 set by coll graph occurrences
alarm outside warn alarm
Tracks create key activities of the keys in the group. of border

Collector: RegistryCollector
Total_RegDeleteKey Y con 0–4000 1–10 11–4000 set by coll graph occurrences
alarm outside warn alarm
Tracks delete key activities of the keys in the group. of border

Collector: RegistryCollector
Total_UpdateFrequency Y con 0–4000 1–20 21–4000 set by coll graph occurrences
alarm outside warn alarm
Tracks all update activities of the keys in the group. of border

Collector: RegistryCollector

PATROL Parameter Reference Manual 841

PATROL Parameter Reference Manual 842

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 158 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_REGISTRY_GROUP_NO_ALARM Application Class
Report Y con NA NA NA set by coll text NA

Reports the all update activities of the keys in the group.

Collector: RegistryCollector
Total_RegSetValue Y con NA NA NA set by coll graph occurrences

Tracks Set Value activities of the keys in the group.

Collector: RegistryCollector
Total_RegDeleteValue Y con NA NA NA set by coll graph occurrences

Tracks delete value activities of the keys in the group.

Collector: RegistryCollector
Total_RegCreateKey Y con NA NA NA set by coll graph occurrences

Tracks create key activities of the keys in the group.

Collector: RegistryCollector
Total_RegDeleteKey Y con NA NA NA set by coll graph occurrences

Tracks delete key activities of the keys in the group.

Collector: RegistryCollector
Total_UpdateFrequency Y con NA NA NA set by coll graph occurrences

Tracks all update activities of the keys in the group.

Collector: RegistryCollector
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 159 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_SECURITY Application Class
SECsvrErrorsAccessPermissions Y con undef undef undef set by coll gauge errors

Displays the number of times people attempted to open

files and failed because of insufficient permissions to the
file. A high number of failures can indicate that someone
is trying to randomly access files that are not adequately
protected.

Collector: SVRServerColl
SECsvrErrorsGrantedAccess Y con undef undef undef set by coll gauge errors

Displays the number of times people attempted to open

files and were denied. A high number of denied-access
errors can indicate that someone is attempting to access
files without the correct authorization.

Collector: SVRServerColl
SECsvrErrorsLogon Y con undef undef undef set by coll gauge errors

Displays the total number of failed login attempts to the

server since the system started. A high number of failed
logon attempts can indicate that someone is trying to
guess passwords, which could pose a breach in the
security of the server.

Collector: SVRServerColl

PATROL Parameter Reference Manual 843

PATROL Parameter Reference Manual 844

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 160 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
SECsvrErrorsLogonDelta Y con 0–100 0–100 100–100 set by coll gauge errors
inactive by inactive by inactive by
Displays the number of failed logon attempts to the default default default
server during each collection period. A high number of
failed logon attempts can indicate that someone is trying
to guess passwords, possibly using a password-cracking
program, which could pose a breach in the security of the
server.

Collector: SVRServerColl
NT_SERVER Application Class
SVRServerColl Y coll NA NA NA 1 min NA NA

Collects server statistics from the server performance

objects in the Windows Performance Database.
SVRsvrBytesTotalPerSec N con undef undef undef set by coll graph bytes per sec

Displays the number of bytes the server has sent to and

received from the network. This value provides an
overall indication of how busy the server is. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: SVRServerColl
SVRsvrContextBlksQueuedPerSec N con undef undef undef set by coll graph sec

Displays the rate (in seconds) at which that work context

blocks were placed on the server's FSP queue to await
server action. This parameter is inactive by default. You
can activate this parameter from the PATROL Console
KM tab.

Collector: SVRServerColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 161 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
SVRsvrServerSessions Y con undef undef undef set by coll graph number of sessions

Displays the number of sessions currently active in the

server. This value indicates current server activity.

Collector: SVRServerColl
SVRsvrSessionsErroredOut Y con undef undef undef set by coll graph number of sessions

Displays the number of sessions that have been closed

because of unexpected error conditions. This value
indicates how frequently network problems are causing
dropped sessions on the server.

Collector: SVRServerColl
SVRsvrSessionsForcedOff Y con undef undef undef set by coll gauge number of sessions

Displays the number of sessions that have been forced to

logoff.

Collector: SVRServerColl
SVRsvrSessionsLoggedOff N con undef undef undef set by coll graph number of sessions

Displays the number of sessions that have terminated

normally. Use this measurement with
SVRsvrSessionsErroredOut and
SVRsvrSessionsTimedOut to determine the ratio between
error or timed-out sessions to normal terminations. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: SVRServerColl

PATROL Parameter Reference Manual 845

PATROL Parameter Reference Manual 846

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 162 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
SVRsvrSessionsTimedOut Y con undef undef undef set by coll gauge number of timed out
sessions
Displays the number of sessions that were closed because
their idle time exceeded the auto-disconnect parameter
for the server.

Collector: SVRServerColl
NT_SERVICES Application Class
Note:Only one of the following parameters are active at any given time:

■ SvcContinuePending
■ SvcDown
■ SvcPause
■ SvcPausePending
■ SvcRunning
■ SvcStartPending
■ SvcStopPending
■ SvcNotResponding
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 163 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
ServiceStatus Y con NA 1–5 5–12 set by coll graph NA
warn alarm
Indicates whether a service is up or down. By default,
when a service is stopped, this parameter enters an Alarm
state. However, for a particular monitored service, you
can specify that the parameter enters a Warn state
instead. For more information about changing the default
behavior, see the PATROL KM for Windows OS online
Help.

The status levels are:

0 = running
1 = start pending
2 = stop pending (first time)
3 = pause pending (first time)
4 = continue pending (first time)
5 = pause
6 = start pending (after first time)
7 = stop pending (after first time)
8 = pause pending (after first time)
9 = continue pending (after first time)
10 = stopped
11 = status unknown (If ServiceStatus has this value, the
parameter SvcUnkownStatus is displayed in an alarm
state.)

Collector: NT_SERVICES Application Discovery

SvcContinuePending Y con undef 1–5 5–9 NA stoplight NA
warn alarm
Indicates that the status of the service is Continue
Pending.

Collector: NT_SERVICES Application Discovery

PATROL Parameter Reference Manual 847

PATROL Parameter Reference Manual 848

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 164 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
SvcDown Y con undef NA 9–10 NA stoplight NA
alarm
Indicates that the service is down.

Collector: NT_SERVICES Application Discovery

SvcNotResponding Y con 0–12 0–12 12–12 NA stoplight NA
inactive by inactive by active by
Indicates that the service is not responding. This default default default
parameter is active only if the executable that you
provide determines that the monitored service is not
responding. If the service is not responding, the
SvcNotResponding and SvcStatus parameters enter an
alarm state. For more information, see the PATROL KM
for Windows OS online Help.

Collector: NT_SERVICES Application Discovery

SvcPaused Y con undef 0–5 NA NA stoplight NA
warn
Indicates that the service is paused.

Collector: NT_SERVICES Application Discovery

SvcPausePending Y con undef 1–5 5–9 NA stoplight NA
warn alarm
Indicates that the service status is Pause Pending.

Collector: NT_SERVICES Application Discovery

SvcRunning Y con NA NA NA set by coll stoplight NA

Indicates that the service is running.

Collector: NT_SERVICES Application Discovery

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 165 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
SvcStartPending Y con NA 1–5 5–9 set by coll stoplight NA
warn alarm
Indicates that the service status is Start Pending.

Collector: NT_SERVICES Application Discovery

SvcStopPending Y con NA 1–5 5–10 set by coll stoplight NA
warn alarm
Indicates that the service status is Stop Pending.

Collector: NT_SERVICES Application Discovery

SvcUnkownStatus Y con NA NA 11 set by coll stoplight NA
alarm
Indicates that the service state is unknown.

Collector: NT_SERVICES Application Discovery

NT_SERVICES_CONTAINER Application Class
ServiceColl Y coll NA NA NA 5 min NA NA

Collects information about service status, service CPU

usage, and service memory usage.
NT_SYSTEM Application Class
SYSSystemColl Y coll NA NA NA 1 min NA NA

Collects system statistics from the system performance

objects in the Windows Performance Database.
SYSobjProcesses Y con undef undef undef set by coll graph number of processes

Displays the number of processes in the computer at the

time of data collection.

Collector: SYSObjectsColl

PATROL Parameter Reference Manual 849

PATROL Parameter Reference Manual 850

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 166 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
SYSobjThreads Y con undef undef undef set by coll graph number of threads

Displays the number of threads in the computer.

Collector: SYSObjectsColl
SYSsysContextSwitchesPerSec N con undef undef undef set by coll graph switches per sec

Displays the rate of switches, in seconds, from one thread

to another. Thread switches can occur either inside a
single process or across processes. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: SYSSystemColl
SYSsysProcessorQueueLength N con undef undef undef set by coll graph length in threads

Displays the length of the processor queue in number of

threads. This parameter is inactive by default. You can
activate this parameter from the PATROL Console KM
tab.

Collector: SYSSystemColl
SYSsysSystemCallsPerSec N con undef 0–50 50–100 set by coll graph number of calls per
warn alarm sec
Displays the number of calls per second made to
Windows system service routines. This parameter is
inactive by default. You can activate this parameter from
the PATROL Console KM tab.

Collector: SYSSystemColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 167 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
SYSsysSystemUpTime Y con undef undef undef set by coll graph sec

Displays the time, in seconds, that the computer has been

up and running.

Collector: SYSSystemColl
NT_TCP Application Class
TCPTcpColl Y coll NA NA NA 5 min NA NA

Collects TCP statistics from the NT TCP object.

TCPtcpConnectionFailures Y con undef undef undef set by coll graph number of
connection failures
Displays the number of times TCP connections have
made a direct transition to

■ the CLOSED state from either the SYN-SENT state or

the SYN-RCVD state
■ the LISTEN state from the SYN-RCVD state
Collector: TCPTcpColl
TCPtcpConnectionsActive Y con undef undef undef set by coll graph number of active
connections
Displays the number of times TCP connections have
made a direct transition to the SYN-SENT state from the
CLOSED state.

Collector: TCPTcpColl
TCPtcpConnectionsEstablished Y con undef undef undef set by coll graph number of
established
Displays the number of TCP connections for which the connections
current state is either ESTABLISHED or CLOSE-WAIT.

Collector: TCPTcpColl

PATROL Parameter Reference Manual 851

PATROL Parameter Reference Manual 852

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 168 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
TCPtcpConnectionsReset Y con undef undef undef set by coll graph number of reset
connections
Displays the number of times TCP connections have
made a direct transition to the CLOSED state from either
the ESTABLISHED state or the CLOSE-WAIT state.

Collector: TCPTcpColl
TCPtcpSegmentsPerSec N con undef undef undef set by coll graph segments per sec

Displays the rate that TCP segments are sent or received

using the TCP protocol. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: SYSSystemColl
TCPtcpSegmentsRcvdPerSec N con undef undef undef set by coll graph received segments
per sec
Displays the rate that segments are received, including
those received in error. This count includes segments
received on currently established connections. This
parameter is inactive by default. You can activate this
parameter from the PATROL Console KM tab.

Collector: SYSSystemColl
TCPtcpSegmentsReTransPerSec N con undef undef undef set by coll graph segments
retransmitted per sec
Displays the rate that segments are retransmitted, that is,
segments transmitted containing one or more previously
transmitted bytes. This parameter is inactive by default.
You can activate this parameter from the PATROL
Console KM tab.

Collector: SYSSystemColl
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 169 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
TCPtcpSegmentsSentPerSec N con undef undef undef set by coll graph segments sent per sec

Displays the rate that segments are sent, including those

on current connections, but excluding those containing
only retransmitted bytes. This parameter is inactive by
default. You can activate this parameter from the
PATROL Console KM tab.

Collector: SYSSystemColl
NT_UDP Application Class
UDPUdpColl Y coll NA NA NA 5 min NA NA

Collects UDP statistics from the NT UDP object.

UDPudpDatagsPerSec Y con undef undef undef set by coll graph datagrams per sec

Displays the rate that UDP datagrams are sent or

received.

Collector: UDPUdpColl
UDPudpDatagsRcvdErrors Y con undef undef undef set by coll graph number of datagrams

Displays the number of received UDP datagrams that

could not be delivered for reasons other than the lack of
an application at the destination port.

Collector: UDPUdpColl
UDPudpDatagsRcvdPerSec Y con undef undef undef set by coll graph datagrams per sec

Displays the rate that UDP datagrams are delivered to

UDP users.

Collector: UDPUdpColl

PATROL Parameter Reference Manual 853

PATROL Parameter Reference Manual 854

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 170 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
UDPudpDatagsSentPerSec Y con undef undef undef set by coll graph datagrams per sec

Displays the rate that UDP datagrams are sent.

Collector: UDPUdpColl
PATROL_NT Application Class
PADeltaBetweenExecSecs Y std undef undef undef 15 min graph sec

Displays the number of seconds between executions. This

value is the RUNQ_DELTA variable.
PAErrorLogFileSize Y std undef undef undef 1 hr graph bytes

Displays the size (in bytes) of the Agent error log file.
PAInternalErrors Y std undef undef undef 30 min gauge number of errors

Displays the number of miscellaneous internal errors.

PAOustandingJobs Y std undef undef undef 5 min graph number of jobs

Displays the number of currently executing jobs on the

PATROL Agent and the time at which they were
executed.
PATotalErrors Y std undef undef undef 45 min gauge number of errors

Displays the total number of errors detected by the

PATROL Agent.
Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 171 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
PAUserErrors Y std undef undef undef 30 min gauge number of errors

Displays the number of errors that have occurred in user-

specified commands. These commands can be commands
or tasks that you have executed through the following:

■ interactive command dialog boxes

■ command windows
■ task windows
■ user-defined menu items
PAWorkRateExecsMin Y std 0–60 20–25 25–60 5 min graph number of executions
alarm warn at alarm at
Displays the number of operating system process executions executions
executions performed per minute by the PATROL Agent.
PATROL Wizard for Microsoft Performance Monitor and WMI 2.0.03
NT_PERFMON_COUNTER Applcation Class
Value N con undef undef undef set by coll graph determined by user

The actual name of this parameter derived from the name

of the parent object. By default, this parameter does not
have any alarm thresholds unless you set them when you
create the parameter.

Collector: PerCounterCollector
PerCounterCollector Y coll NA NA NA 10 min NA NA

Collects performance monitor data from Microsoft's

Performance Monitor counters and supplies it to the
parameters you created.

PATROL Parameter Reference Manual 855

PATROL Parameter Reference Manual 856

Table 23 PATROL for Microsoft Windows Servers 3.0.03 (Part 172 of 172)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range

Units
Type
Parameter

or
NT_WMI_COUNTER Applcation Class
Value N con undef undef undef set by coll graph determined by user

The actual name of this parameter derived from the name

of the parent object. By default, this parameter does not
have any alarm thresholds unless you set them when you
create the parameter.

Collector: WmiCounterCollector
WmiCounterCollector Y coll NA NA NA 10 min NA NA

Collects data from Microsoft's WMI data and supplies it

to the parameters you created.
PATROL for Microsoft Window Terminal Services 2.1.02

Table 24 PATROL for Microsoft Windows Terminal Services 2.1.02 (Part 1 of 11)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range
Type

Unit
Parameter

or
WTS_PROCESS_CONTAINER Application Class
PrCollector Y coll NA NA NA 10 min NA NA

Serves as the collector for WTS_PROCESS consumer

parameters.
WTS_PROCESS Application Class
PrCpuUtilization Y con NA 80–90 90–100 set by coll graph percentage of CPU
usage
Monitors the percentage of CPU used by this process.

Collector: PrCollector
PrElapsedTime N con NA NA NA set by coll graph sec

Monitors the total elapsed time this process has been

running.

Collector: PrCollector
PrHandleCount Y con NA NA NA set by coll graph number of handles

Monitors the total number of handles currently open by

this process.

Collector: PrCollector

PATROL Parameter Reference Manual 857

PATROL Parameter Reference Manual 858

Table 24 PATROL for Microsoft Windows Terminal Services 2.1.02 (Part 2 of 11)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range
Type

Unit
Parameter

or
PrPageFaults N con NA NA NA set by coll graph page faults per sec

Monitors the rate at which page faults occur in the

threads executing in this process.

Collector: PrCollector
PrPageFilebytes N con NA NA NA set by coll graph MB

Monitors the current number of megabytes that this

process has used in the paging file(s).

Collector: PrCollector
PrPeakPageFilebytes N con NA NA NA set by coll graph MB

Monitors the maximum number of megabytes that this

process has used in the paging file(s).

Collector: PrCollector
PrPeakVirtualMemory N con NA NA NA set by coll graph MB

Monitors the maximum number of megabytes of virtual

address space the process has used at any one time.

Collector: PrCollector
PrPeakWorkingMemory N con NA NA NA set by coll graph MB

Monitors the maximum number of megabytes in the

working set at any point in time.

Collector: PrCollector
Table 24 PATROL for Microsoft Windows Terminal Services 2.1.02 (Part 3 of 11)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range
Type

Unit
Parameter

or
PrPrivateMemory Y con NA NA NA set by coll graph MB

Monitors the current number of megabytes that this

process has allocated that cannot be shared with other
processes.

Collector: PrCollector
PrPrivTimePct N con NA NA NA set by coll graph percentage of elapsed
time
Monitors the percentage of elapsed time that all threads
for this process have spent executing in privileged mode.

Collector: PrCollector
PrUserTimePct N con NA NA NA set by coll graph percentage of elapsed
time
Monitors the percentage of elapsed time that all threads
for this process have spent executing in user mode.

Collector: PrCollector
PrVirtualMemory Y con NA NA NA set by coll graph MB

Monitors the current size in megabytes of the virtual

address space in use by this process.

Collector: PrCollector
PrdWorkingMemory Y con NA NA NA set by coll graph MB

Monitors the number of megabytes that are currently

allocated to this process’s working set (memory).

Collector: PrCollector

PATROL Parameter Reference Manual 859

PATROL Parameter Reference Manual 860

Table 24 PATROL for Microsoft Windows Terminal Services 2.1.02 (Part 4 of 11)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range
Type

Unit
Parameter

or
WTS_SESSION_CONTAINER Application Class
SeCollector Y coll NA NA NA 10 min NA NA

Serves as the collector for WTS_SESSION consumer

parameters.
WTS_SESSION Application Class
SeCpuUtilization Y con NA 80–90 90–100 set by coll graph percentage of CPU
being used
Monitors the CPU percentage being used by the session
instance.

Collector: SeCollector
SeDuration N con 0–720 NA NA set by coll graph min

Monitors the total elapsed time, in minutes, that the

session has been connected and disconnected.

Collector: SeCollector
SeInputAsyncFrameError N con 0–0 NA NA set by coll graph number of frame
errors
Monitors the number of input async framing errors.
These errors are typically caused by a noisy transmission
line.

Collector: SeCollector
SeInputAsyncOverflow N con 0–0 NA NA set by coll graph number of overflow
errors
Monitors the number of input async overflow errors.
These errors can be caused by a lack of buffer space
available on the host.

Collector: SeCollector
Table 24 PATROL for Microsoft Windows Terminal Services 2.1.02 (Part 5 of 11)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range
Type

Unit
Parameter

or
SeInputAsyncOverrun N con 0–0 NA NA set by coll graph number of overrun
errors
Monitors the number of input async overrun errors.
These errors can be caused by the baud rate being faster
than the computer can handle, or a non-16550 serial line
being used. Overruns can also occur if too many high-
speed serial lines are active at one time for the processor
to handle.

Collector: SeCollector
SeInputAsyncParityError N con 0–0 NA NA set by coll graph number of parity
errors
Monitors the number of input parity errors that occur
during asynchronous communication with a client. These
can be caused by a noisy transmission line.

Collector: SeCollector
SeInputBytes N con NA NA NA set by coll graph bytes

Monitors the total number of bytes, including data and all

protocol overhead, input during this session.

Collector: SeCollector
SeInputCompressFlushes N con NA NA NA set by coll graph number of compress
flushes
Monitors the number of input compression dictionary
flushes. The compression dictionary is flushed when the
data cannot be compressed to allow new data a better
chance of being compressed.

Collector: SeCollector

PATROL Parameter Reference Manual 861

PATROL Parameter Reference Manual 862

Table 24 PATROL for Microsoft Windows Terminal Services 2.1.02 (Part 6 of 11)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range
Type

Unit
Parameter

or
SeInputCompressedBytes N con NA NA NA set by coll graph bytes

Monitors the number of bytes input after compression.

Collector: SeCollector
SeInputCompressionRatio N con NA NA NA set by coll graph compression ratio

Monitors the compression ratio of the server input data

stream.

Collector: SeCollector
SeInputErrors N con 0–0 NA NA set by coll graph number of input
errors
Monitors the number of input errors of all types that
occur on this session.

Collector: SeCollector
SeInputFrames N con NA NA NA set by coll graph number of input
frames
Monitors the number of frames (packets) input during
the session.

Collector: SeCollector
SeInputNonProtocolBytes N con NA NA NA set by coll graph bytes

Monitors the number of bytes input on this session after

all protocol-overhead has been removed.

Collector: SeCollector
SeInputNonProtocolFrames N con NA NA NA set by coll graph number of frames

Monitors the number of frames input after any additional

protocol-added frames have been removed.

Collector: SeCollector
Table 24 PATROL for Microsoft Windows Terminal Services 2.1.02 (Part 7 of 11)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range
Type

Unit
Parameter

or
SeInputProtocolBytesPct N con NA NA NA set by coll graph ratio of the number of
bytes input and the
Monitors the ratio (efficiency) of the total number of bytes number of non-
input (SeInputBytes) and the number of non-protocol protocol bytes input
bytes (SeInputNonProtocolBytes) input during this
session. The calculation is (SeInputNonProtocolBytes /
SeInputBytes) * 100.

Collector: SePctCollector
SeInputProtocolFramcesPct N con NA NA NA set by coll graph ratio of the number of
frames input and the
Monitors the ratio (efficiency) of the total number of number of non-
frames input (SeInputFrames) and the number of non- protocol frames input
protocol frames input during this session.

Collector: SePctCollector
SeInputTimeouts N con NA NA NA set by coll graph number of input
timeouts
Monitors the total number of timeouts on the
communication line as seen from the client side of the
connection. Timeouts are typically due to noisy
transmission lines or in having the protocol timeout set
too short.

Collector: SeCollector
SeInputTransportErrors N con 0–0 NA NA set by coll graph number of transport
errors
Monitors the number of Terminal Services transport-level
errors on input.

Collector: SeCollector

PATROL Parameter Reference Manual 863

PATROL Parameter Reference Manual 864

Table 24 PATROL for Microsoft Windows Terminal Services 2.1.02 (Part 8 of 11)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range
Type

Unit
Parameter

or
SeInputWaitForOutBuffer N con NA NA NA set by coll graph wait count

Monitors the number of times that a wait for an available

send buffer was done by the protocols on the client side
of the connection.

Collector: SeCollector
SeOutputAsyncFrameError N con 0-0 NA NA set by coll graph number of frame
errors
Monitors the number of output async framing errors.
These errors could be caused by hardware or noisy-line
problems.

Collector: SeCollector
SeOutputAsyncOverflow N con 0–0 NA NA set by coll graph number of overflow
errors
Monitors the number of output async overflow errors.

Collector: SeCollector
SeOutputAsyncOverrun N con 0–0 NA NA set by coll graph number of overrun
errors
Monitors the number of output async overrun errors.

Collector: SeCollector
SeOutputAsyncParityError N con 0–0 NA NA set by coll graph number of parity
errors
Monitors the number of output async parity errors. These
errors can be caused by a hardware or line problem.

Collector: SeCollector
Table 24 PATROL for Microsoft Windows Terminal Services 2.1.02 (Part 9 of 11)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range
Type

Unit
Parameter

or
SeOutputBytes N con NA NA NA set by coll graph bytes

Monitors the total number of bytes, including data and all

protocol overhead, output during this session.

Collector: SeCollector
SeOutputCompressFlushes N con NA NA NA set by coll graph number of compress
flushes
Monitors the number of output compression dictionary
flushes. The compression dictionary is flushed when the
data cannot be compressed to allow new data a better
chance of being compressed.

Collector: SeCollector
SeOutputCompressedBytes N con NA NA NA set by coll graph bytes

Monitors the number of bytes output after compression.

Collector: SeCollector
SeOutputCompressionRatio N con NA NA NA set by coll graph compression ratio

Monitors the compression ratio of the server output data

stream.

Collector: SeCollector
SeOutputErrors N con 0-0 NA NA set by coll graph number of output
errors
Monitors the number of output errors of all types.

Collector: SeCollector

PATROL Parameter Reference Manual 865

PATROL Parameter Reference Manual 866

Table 24 PATROL for Microsoft Windows Terminal Services 2.1.02 (Part 10 of 11)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range
Type

Unit
Parameter

or
SeOutputFrames N con NA NA NA set by coll graph number of output
frames
Monitors the number of frames (packets) output during
this session.

Collector: SeCollector
SeOutputNonProtocolBytes N con NA NA NA set by coll graph bytes

Monitors the number of bytes output during this session

after all protocol-overhead has been removed.

Collector: SeCollector
SeOutputNonProtocolFrames N con NA NA NA set by coll graph number of frames

Monitors the number of frames output before any

additional protocol frames have been added.

Collector: SeCollector
SeOutputProtocolBytesPct N con NA NA NA set by coll graph ratio of the number of
bytes input and the
Monitors the ratio (efficiency) of the total number of bytes number of non-
input (SeOutputBytes) and the number of non-protocol protocol bytes input
bytes (SeOutputNonProtocolBytes) input during this
session. The calculation is (SeOutputNonProtocolBytes /
SeOutputBytes) * 100.

Collector: SePctCollector
Table 24 PATROL for Microsoft Windows Terminal Services 2.1.02 (Part 11 of 11)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

range
Type

Unit
Parameter

or
SeOutputProtocolFramesPct N con NA NA NA set by coll graph ratio of the total
number of frames
Monitors the ratio (efficiency) of the total number of output and the
frames output (SeOutputFrames) and the number of non- number of non-
protocol frames output during this session. protocol frames
output
Collector: SePctCollector
SeOutputTimeouts N con NA NA NA set by coll graph number of output
timeouts
Monitors the total number of timeouts on the
communication line from the host side of the connection.
Timeout is typically due to noisy transmission lines or in
having the protocol timeout set too short.

Collector: SeCollector

PATROL Parameter Reference Manual 867

PATROL Parameter Reference Manual 868
PATROL for Netware 1.6.00

Table 25 PATROL for Netware 1.6.00 (Part 1 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NW_CONNECTIONS Application Class
NWCollConnections Y coll NA NA NA 10 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_CONNECTIONS
application class; sets the NW_CONNECTIONS
consumer parameters.
NWTCurrConnects Y con NA NA NA set by coll graph number of
connections
Monitors the number of current network connections for
the server.

Collector: NWCollConnections
NWTCurrStations Y con NA NA NA set by coll graph number of stations

Monitors the number of current stations connected to the

server.

Collector: NWCollConnections
NWTMaxConnects Y con NA NA NA set by coll graph number of
connections
Monitors the maximum number of connections allowed
on the server.

Collector: NWCollConnections

PATROL Parameter Reference Manual 869

PATROL Parameter Reference Manual 870

Table 25 PATROL for Netware 1.6.00 (Part 2 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWTMaxStations Y con NA NA NA set by coll graph number of stations

Monitors the maximum number of stations allowed on

the server.

Collector: NWCollConnections
NWTPeakConnects Y con NA NA NA set by coll graph number of
connections
Tracks the largest number of connections to the network
that have been made up to the current time.

Collector: NWCollConnections
NWTPeakStations Y con NA NA NA set by coll graph number of stations

Tracks the largest number of stations in the network that

have been made up to the current time.

Collector: NWCollConnections
NW_CPU Application Class
NWCCPUSpeed Y con NA NA NA set by coll graph MHz

Monitors the CPU speed of the server.

Collector: NWCollCPU
NWCCurrIdleLoops Y con NA NA NA set by coll graph number of loops

Monitors the current number of idle loops.

Collector: NWCollCPU
NWCIdleCount Y con NA NA NA set by coll graph number of loops

Displays the total number of idle loops in the system.

Collector: NWCollCPU
Table 25 PATROL for Netware 1.6.00 (Part 3 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWCMaxIdleLoops Y con NA NA NA set by coll graph number of loops

Monitors the maximum number of idle loops allowed in

the system.

Collector: NWCollCPU
NWCollCPU Y coll NA NA NA 60 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_CPU application
class. It sets the NW_CPU consumer parameters.
NWCUtilization Y con NA NA NA set by coll graph percentage of CPU
usage
Monitors CPU usage.

Collector: NWCollCPU
NW_DISK Application Class
NWCollDisk Y coll NA NA NA 60 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_DISK application
class. It sets the NW_DISK consumer parameters.
NWDDirtyBlocks Y con NA NA NA set by coll graph number of blocks

Monitors the number of dirty blocks on the disk.

Collector: NW_Disk
NWDKBsRead Y con NA NA NA set by coll graph KB

Monitors the number of kilobytes read from the disk.

Collector: NW_Disk

PATROL Parameter Reference Manual 871

PATROL Parameter Reference Manual 872

Table 25 PATROL for Netware 1.6.00 (Part 4 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWDKBsWritten Y con NA NA NA set by coll graph KB

Monitors the number of kilobytes written to the disk.

Collector: NW_Disk
NWDReads Y con NA NA NA set by coll graph number of reads

Monitors the total number of reads from the disk.

Collector: NW_Disk
NWDRequests Y con NA NA NA set by coll graph number of requests

Monitors the total number of requests against the disk.

Collector: NW_Disk
NWDTotalIOs Y con NA NA NA set by coll graph number of number of
operations
Monitors the total number of I/O operations.

Collector: NW_Disk
NWDTotalKBs Y con NA NA NA set by coll graph KB

Monitors the total number of kilobytes read from and

written to the disk.

Collector: NW_Disk
NWDWrites Y con NA NA NA set by coll graph number of writes

Monitors the total number of writes to the disk.

Collector: NW_Disk
Table 25 PATROL for Netware 1.6.00 (Part 5 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NW_FILESYSTEM Application Class
NWCollFilesystem Y coll NA NA NA 60 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_FileSystem
application class. It sets the NW_FILESYSTEM consumer
parameters.
NWFCreates Y con NA NA NA set by coll graph number of requests

Monitors the number of file systems created.

Collector: NWCollFilesystem
NWFDeletes Y con NA NA NA set by coll graph number of requests

Monitors the number of file systems deleted.

Collector: NWCollFilesystem
NWFDirSearches Y con NA NA NA set by coll graph number of requests

Monitors the number of directory searches performed

against the system.

Collector: NWCollFilesystem
NWFFATSectDirty Y con NA NA NA set by coll graph number of sectors

Monitors the number of dirty sections on the FAT file

system.

Collector: NWCollFilesystem
NWFFATSectWritt Y con NA NA NA set by coll graph number of sectors

Monitors the number of sections written on the FAT file

system.

Collector: NWCollFilesystem

PATROL Parameter Reference Manual 873

PATROL Parameter Reference Manual 874

Table 25 PATROL for Netware 1.6.00 (Part 6 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWFKBsRead Y con NA NA NA set by coll graph KB

Monitors the number of kilobytes read from the file

system.

Collector: NWCollFilesystem
NWFKBsWritten Y con NA NA NA set by coll graph KB

Monitors the number of kilobytes written to the file

system.

Collector: NWCollFilesystem
NWFOpens Y con NA NA NA set by coll graph number of requests

Monitors the number of open file systems.

Collector: NWCollFilesystem
NWFReads Y con NA NA NA set by coll graph number of requests

Monitors the number of reads against the file system.

Collector: NWCollFilesystem
NWFRecordLocks Y con NA NA NA set by coll graph number of locks

Monitors the number of records locked in the file system.

Collector: NWCollFilesystem
NWFRenames Y con NA NA NA set by coll graph number of requests

Monitors the number of renamed files in the server.

Collector: NWCollFilesystem
Table 25 PATROL for Netware 1.6.00 (Part 7 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWFTotalFileIO Y con NA NA NA set by coll graph number of number of
operations
Monitors the total file I/O operations on the server.

Collector: NWCollFilesystem
NWFTotalFileKBs Y con NA NA NA set by coll graph KB

Monitors the total number of kilobytes available in the

file system.

Collector: NWCollFilesystem
NWFTransactions Y con NA NA NA set by coll graph number of
transactions
Monitors the total number of transactions against the file
system.

Collector: NWCollFilesystem
NWFWrites Y con NA NA NA set by coll graph number of requests

Monitors the number of writes to the file system.

Collector: NWCollFilesystem
NW_MEMORY Application Class
NWCollMemory Y coll NA NA NA 60 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_MEMORY
application class. It sets the NW_MEMORY consumer
parameters.
NWMAllocMem Y con NA NA NA set by coll graph MB

Monitors the amount of allocated memory that is

available on the server.

Collector: NWCollMemory

PATROL Parameter Reference Manual 875

PATROL Parameter Reference Manual 876

Table 25 PATROL for Netware 1.6.00 (Part 8 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWMCacheBuffSize Y con NA NA NA set by coll graph bytes

Monitors the size of the cache buffer on the server.

Collector: NWCollMemory
NWMCacheMem Y con NA NA NA set by coll graph MB

Monitors the amount of cache memory that is available

on the server.

Collector: NWCollMemory
NWMCurrCacheBuff Y con NA NA NA set by coll graph number of buffers

Monitors the current number of cache buffers on the

server.

Collector: NWCollMemory
NWMDirCacheBuffs Y con NA NA NA set by coll graph number of buffers

Monitors the number of directory cache buffers on the

server.

Collector: NWCollMemory
NWMDrtyCacheBuff Y con NA NA NA set by coll graph number of buffers

Monitors the number of dirty cache buffers on the server.

Collector: NWCollMemory
NWMMovMem Y con NA NA NA set by coll graph MB

Monitors the amount of movable memory that is

available on the server.

Collector: NWCollMemory
Table 25 PATROL for Netware 1.6.00 (Part 9 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWMNonMovMem Y con NA NA NA set by coll graph MB

Monitors the amount of non-movable memory that is

available on the server.

Collector: NWCollMemory
NWMOrigCacheBuff Y con NA NA NA set by coll graph number of buffers

Monitors the original number of cache buffers on the

server before any changes were made.

Collector: NWCollMemory
NWMPermMem Y con NA NA NA set by coll graph MB

Monitors the amount of permanent memory that is

available on the server.

Collector: NWCollMemory
NWMRcvBuffs Y con NA NA NA set by coll graph number of buffers

Monitors the number of buffers available on the server

for receiving data.

Collector: NWCollMemory
NWMTotalKnownMem Y con NA NA NA set by coll graph MB

Monitors the amount of total known memory that is

available on the server.

Collector: NWCollMemory

PATROL Parameter Reference Manual 877

PATROL Parameter Reference Manual 878

Table 25 PATROL for Netware 1.6.00 (Part 10 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWMTotalWorkMem Y con NA NA NA set by coll graph MB

Monitors the amount of total working memory that is

available on the server.

Collector: NWCollMemory
NWMUnusedAllocMem Y con NA NA NA set by coll graph percentage of unused
allocated memory
Monitors the amount of unused allocated memory that is available
available on the server.

Collector: NWCollMemory
NWMUnusedPermMem Y con NA NA NA set by coll graph percentage of unused
permanent memory
Monitors the amount of unused permanent memory that available
is available on the server.

Collector: NWCollMemory
NWMUsedAllocMem Y con NA NA NA set by coll graph percentage of used
allocated memory
Monitors the amount of used allocated memory on the
server.

Collector: NWCollMemory
NWMUsedPermMem Y con NA NA NA set by coll graph percentage of used
permanent memory
Monitors the amount of used permanent memory on the
server.

Collector: NWCollMemory
Table 25 PATROL for Netware 1.6.00 (Part 11 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NW_MISCELLANEOUS Application Class
NWMiscServer Y coll NA NA NA 60 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_MISCELLANEOUS
application class. It sets the NW_MISCELLANEOUS
consumer parameters.
NWSFilesOpen Y con NA NA NA set by coll graph number of files

Monitors the number of files that are open on the server.

Collector: NWMiscServer
NWSPkStationsInUse Y con NA NA NA set by coll graph number of stations

Monitors the peak number of stations in use.

Collector: NWMiscServer
NWSServiceProcs Y con NA NA NA set by coll graph number of processes

Sets the maximum number of service processes that the

operating system may create.

Collector: NWMiscServer
NWSStationsInUse Y con NA NA NA set by coll graph number of stations

Monitors the number of stations that are currently in use

on the server.

Collector: NWMiscServer

PATROL Parameter Reference Manual 879

PATROL Parameter Reference Manual 880

Table 25 PATROL for Netware 1.6.00 (Part 12 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NW_NDS Application Class
NWCollNDS Y coll NA NA NA 60 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_NDS application
class. It sets the NW_NDS consumer parameters.
NWRAbortPartitionOps Y con NA NA NA set by coll graph number of operations

Reports the number of abort partition operations on the

NetWare server.

Collector: NWCollNDS
NWRAddEntry Y con NA NA NA set by coll graph number of operations

Reports the number of NDS add entry operations on the

NetWare server.

Collector: NWCollNDS
NWRAddPartition Y con NA NA NA set by coll graph number of operations

Reports the number of NDS add partition operations on

the NetWare server.

Collector: NWCollNDS
NWRAddReplica Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Add Replica operations on

the NetWare server.

Collector: NWCollNDS
Table 25 PATROL for Netware 1.6.00 (Part 13 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWRAuditSkulking Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Audit Skulking operations

on the NetWare server.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRBackupEntry Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Backup Entries operations.

Collector: NWCollNDS
NWRBeginAuthenticate Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Begin Authenticate

operations.

Collector: NWCollNDS
NWRBeginLogin Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Begin Login operations.

Collector: NWCollNDS
NWRBeginMoveEntry Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Begin Move Entry

operations.

Collector: NWCollNDS

PATROL Parameter Reference Manual 881

PATROL Parameter Reference Manual 882

Table 25 PATROL for Netware 1.6.00 (Part 14 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWRChangePassword Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Change Password

operations.

Collector: NWCollNDS
NWRChangeReplicaType Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Change Replica Type

operations.

Collector: NWCollNDS
NWRChangeTreeName Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Change Tree Name

operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRChkLoginRestricts Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Check Login Restriction

operations.

Collector: NWCollNDS
NWRCloseIteration Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Close Iteration operations.

Collector: NWCollNDS
Table 25 PATROL for Netware 1.6.00 (Part 15 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWRCompare Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Compare operations.

Collector: NWCollNDS
NWRCreatSubordinateRef Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Create Subordinate

Reference operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRCreateBacklink Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Create Backlink operations.

Note: The NDS verb counter is not defined for the
NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRCreateEntryDir Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Create Entry Directory

operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRDefineAttr Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Define Attribute operations.

Collector: NWCollNDS

PATROL Parameter Reference Manual 883

PATROL Parameter Reference Manual 884

Table 25 PATROL for Netware 1.6.00 (Part 16 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWRDefineClass Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Define Class operations.

Collector: NWCollNDS
NWRDeleteExternalRef Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Delete External Reference

operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRDesignateNewMaster Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Designate New Master

operations.

Collector: NWCollNDS
NWREndUpdateReplica Y con NA NA NA set by coll graph number of operations

Reports the number of NDS End Update Replica

operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
Table 25 PATROL for Netware 1.6.00 (Part 17 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWREndUpdateSchema Y con NA NA NA set by coll graph number of operations

Reports the number of NDS End Update Schema

operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRFinishAuthenticate Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Finish Authenticate

operations.

Collector: NWCollNDS
NWRFinishLogin Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Finish Login operations.

Collector: NWCollNDS
NWRFinishMoveEntry Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Finish Move Entry

operations.

Collector: NWCollNDS
NWRGetEffectiveRights Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Get Effective Rights

operations.

Collector: NWCollNDS

PATROL Parameter Reference Manual 885

PATROL Parameter Reference Manual 886

Table 25 PATROL for Netware 1.6.00 (Part 18 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWRGetReplicaRootID Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Get Replica Root ID

operations.

Collector: NWCollNDS
NWRGetServerAddress Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Get Server Address

operations.

Collector: NWCollNDS
NWRInspectEntry Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Inspect Entry operations.

Collector: NWCollNDS
NWRJoinPartition Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Join Partition operations.

Collector: NWCollNDS
NWRLinkReplica Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Link Replica operations.

Note: The NDS verb counter is not defined for the
NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRList Y con NA NA NA set by coll graph number of operations

Reports the number of NDS List operations.

Collector: NWCollNDS
Table 25 PATROL for Netware 1.6.00 (Part 19 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWRListContainClasses Y con NA NA NA set by coll graph number of operations

Reports the number of NDS List Contain Classes

operations.

Collector: NWCollNDS
NWRListPartition Y con NA NA NA set by coll graph number of operations

Reports the number of NDS List Partition operations.

Collector: NWCollNDS
NWRLogout Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Logout operations.

Collector: NWCollNDS
NWRModifyClassDef Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Modify Class Definition

operations.

Collector: NWCollNDS
NWRModifyEntry Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Modify Entry operations.

Collector: NWCollNDS
NWRModifyRdn Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Modify Rdn operations.

Collector: NWCollNDS

PATROL Parameter Reference Manual 887

PATROL Parameter Reference Manual 888

Table 25 PATROL for Netware 1.6.00 (Part 20 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWROpenStream Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Open Stream operations.

Collector: NWCollNDS
NWRPartitionEntryCount Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Partition Entry Count

operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRRead Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Read operations.

Collector: NWCollNDS
NWRReadAttrDef Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Read Attribute Definition

operations.

Collector: NWCollNDS
NWRReadClassDef Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Read Class Definition

operations.

Collector: NWCollNDS
Table 25 PATROL for Netware 1.6.00 (Part 21 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWRReadEntryInfo Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Read Entry Information

operations.

Collector: NWCollNDS
NWRReadReferences Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Read References operations.

Collector: NWCollNDS
NWRReadSyntaxes Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Read Syntax operations.

Collector: NWCollNDS
NWRReleaseMoveEntry Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Release Move Entry

operations.

Collector: NWCollNDS
NWRRemoveAttrDef Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Remove Attribute Definition

operations.

Collector: NWCollNDS
NWRRemoveClassDef Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Remove Class Definition

operations.

Collector: NWCollNDS

PATROL Parameter Reference Manual 889

PATROL Parameter Reference Manual 890

Table 25 PATROL for Netware 1.6.00 (Part 22 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWRRemoveEntry Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Remove Entry operations.

Collector: NWCollNDS
NWRRemoveEntryDir Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Remove Entry Directory

operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRRemovePartition Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Remove Partition operations.

Collector: NWCollNDS
NWRRemoveReplica Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Remove Replica operations.

Collector: NWCollNDS
NWRRenameExternalRef Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Rename External Reference

operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
Table 25 PATROL for Netware 1.6.00 (Part 23 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWRRepairRing Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Repair Ring operations.

Collector: NWCollNDS
NWRRepairTimestamps Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Repair Timestamps

operations.

Collector: NWCollNDS
NWRResolveName Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Resolve Name operations.

Collector: NWCollNDS
NWRRestoreEntry Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Restore Entry operations.

Collector: NWCollNDS
NWRSearch Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Search operations.

Collector: NWCollNDS
NWRSearchFilter Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Search Filter operations.

Collector: NWCollNDS

PATROL Parameter Reference Manual 891

PATROL Parameter Reference Manual 892

Table 25 PATROL for Netware 1.6.00 (Part 24 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWRSetKeys Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Set Keys operations.

Collector: NWCollNDS
NWRSplitPartition Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Split Partition operations.

Collector: NWCollNDS
NWRStartUpdateReplica Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Start Update Replica

operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRStartUpdateSchema Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Start Update Schema

operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRSyncPartition Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Synchronize Partition

operations.

Collector: NWCollNDS
Table 25 PATROL for Netware 1.6.00 (Part 25 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWRSyncSchema Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Synchronize Schema

operations.

Collector: NWCollNDS
NWRTotalActivity Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Total Activity operations.

Collector: NWCollNDS
NWRUpdateReplica Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Update Replica operations.

Collector: NWCollNDS
NWRUpdateSchema Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Update Schema operations.

Note: The NDS verb counter is not defined for the

NetWare 5 NDS tree; it always returns a value of zero.

Collector: NWCollNDS
NWRVerifyPassword Y con NA NA NA set by coll graph number of operations

Reports the number of NDS Verify Password operations.

Collector: NWCollNDS

PATROL Parameter Reference Manual 893

PATROL Parameter Reference Manual 894

Table 25 PATROL for Netware 1.6.00 (Part 26 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NW_NETWORK Application Class
NWCollNetwork Y coll NA NA NA 60 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_NETWORK
application class. It sets the NW_NETWORK consumer
parameters.
NWNAllPackets Y con NA NA NA set by coll graph number of packets

Monitors the number of packets that are available on the

server.

Collector: NW_CollNetwork
NWNKBsRcvd Y con NA NA NA set by coll graph KB

Monitors the number of kilobytes received from the

network on the server.

Collector: NW_CollNetwork
NWNKBsXmtd Y con NA NA NA set by coll graph KB

Monitors the number of kilobytes that have been

transmitted across the network.

Collector: NW_CollNetwork
NWNPacketsRcvd Y con NA NA NA set by coll graph KB

Monitors the number of kilobytes that have been received

from the network on the server.

Collector: NW_CollNetwork
Table 25 PATROL for Netware 1.6.00 (Part 27 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWNPacketsRoutd Y con NA NA NA set by coll graph number of packets

Monitors the number of packets that have been routed

through the network.

Collector: NW_CollNetwork
NWNPacketsXmtd Y con NA NA NA set by coll graph number of packets

Monitors the number of packets that have been

transmitted across the network.

Collector: NW_CollNetwork
NWNTotalKBs Y con NA NA NA set by coll graph KB

Monitors the total number of kilobytes processed by the

server as network traffic.

Collector: NW_CollNetwork
NWNTotalPackets Parameter Y con NA NA NA set by coll graph number of packets

Monitors the total number of packets processed by the

server.

Collector: NW_CollNetwork
NW_NLMS Application Class
NWCollNLMS Y coll NA NA NA 60 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_NLMS application
class. It sets the NW_NLMS consumer parameters.

PATROL Parameter Reference Manual 895

PATROL Parameter Reference Manual 896

Table 25 PATROL for Netware 1.6.00 (Part 28 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWLAllocatedMem Y con NA NA NA set by coll graph bytes

Monitors the allocated memory for the NLM; applies for

all NLM parameters.

Collector: NWCollNLMS
NWLCacheBelow16Mb Y con NA NA NA set by coll graph MB

Monitors the cache that falls below 16 megabytes for the

NLM.

Collector: NWCollNLMS
NWLCacheMovable Y con NA NA NA set by coll graph bytes

Monitors movable cache on the server for the NLM.

Collector: NWCollNLMS
NWLCacheNonMovable Y con NA NA NA set by coll graph bytes

Monitors non-movable cache on the server.

Collector: NWCollNLMS
NWLPermMem Y con NA NA NA set by coll graph bytes

Monitors permanent memory on the server.

Collector: NWCollNLMS
NWLSemiPermMem Y con NA NA NA set by coll graph bytes

Monitors semipermanent memory on the server.

Collector: NWCollNLMS
Table 25 PATROL for Netware 1.6.00 (Part 29 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NW_SERVER Application Class
NWCollServer Y coll NA NA NA 10 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_SERVER
application class. It sets the NW_SERVER consumer
parameters.
NWSPctCPUUtil Y con NA NA NA set by coll graph percentage of CPU
utilization
Displays the percentage of CPU utilization; calculated as
(TotalLoops - IdleLoops)/TotalLoops.

Collector: NWCollServer
NWSPctDrtyCachBuff Y con NA NA NA set by coll graph percentage of dirty
cache buffers
Displays the percentage of dirty cache buffers; calculated
as DirtyBlocks/CurrentBuffers.

Collector: NWCollServer
NWSPctCurrDiskReq Y con NA NA NA set by coll graph percentage of current
disk requests
Displays the percentage of current disk requests;
calculated as DiskRequests/MaxConDiskWrites.

Collector: NWCollServer
NWSPctServProc Y con NA NA NA set by coll graph percentage of service
processes
Displays the percentage of service processes; calculated
as ServiceProcesses/MaxServiceProcesses.

Collector: NWCollServer

PATROL Parameter Reference Manual 897

PATROL Parameter Reference Manual 898

Table 25 PATROL for Netware 1.6.00 (Part 30 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWSPctRecvBuff Y con NA NA NA set by coll graph percentage of receive
buffers
Displays the percentage of receive buffers; calculated as
ReceiveBuffers/MaxReceiveBuffers.

Collector: NWCollServer
NWSPctDirCacheBuff Y con NA NA NA set by coll graph percentage of
directory cache
Displays the percentage of directory cache buffers; buffers
calculated as DirCacheBuffers/MaxDirCacheBuffers.

Collector: NWCollServer
NWSPctVolPurgable Y con NA NA NA set by coll graph percentage of the
volume that is
Displays the percentage of the volume that is purgeable; purgeable
calculated as PurgableKBs/TotalKBs.

Collector: NWCollServer
NWSPctStationConn Y con NA NA NA set by coll graph percentage of stations
that are connected
Displays the percentage of stations that are connected;
calculated as CurrentStations/MaxStations.

Collector: NWCollServer
NWSReadWriteRatio Y con NA NA NA set by coll graph read/write ratio

Displays the read/write ratio; calculated as DiskReads/

(DiskWrites + DiskReads).

Collector: NWCollServer
Table 25 PATROL for Netware 1.6.00 (Part 31 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWSCacheHitRatio Y con NA NA NA set by coll graph hit ratio

Displays the cache hit ratio; calculated as

FileSystemReads/(FileSystemReads + DiskReads).

Collector: NWCollServer
NWSPctAvailDirSlot Y con NA NA NA set by coll graph percentage of
available directory
Displays the percentage of available directory slots; slots
calculated as AvailableDirectorySlots/
TotalDirectorySlots.

Collector: NWCollServer
NWSPctMemAlloc Y con NA NA NA set by coll graph percentage of
memory allocated
Displays the percentage of memory allocated; calculated
as AllocMemory/TotalWorkMemory.

Collector: NWCollServer
NWSPctMemAllocUsed Y con NA NA NA set by coll graph percentage of
allocated memory
Displays the percentage of allocated memory that is actually used
actually used; calculated as UsedAllocMemory/
AllocMemory.

Collector: NWCollServer
NWSPctMemCache Y con NA NA NA set by coll graph percentage of
memory that is used
Displays the percentage of memory that is used for the for the cache
cache; calculated as CacheMemory/TotalWorkMemory.

Collector: NWCollServer

PATROL Parameter Reference Manual 899

PATROL Parameter Reference Manual 900

Table 25 PATROL for Netware 1.6.00 (Part 32 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWSPctMemCacheUsed Y con NA NA NA set by coll graph percentage of used
cache memory
Displays the percentage of used cache memory;
calculated as CurrentBuffers/OriginalBuffers.

Collector: NWCollServer
NWSPctVolumeUsed Y con NA NA NA set by coll graph percentage of the
volume that is used
Displays the percentage of the volume that is used;
calculated as VolumeUsedKBs/VolumeTotalKBs.

Collector: NWCollServer
NWSCurrBuffers Y con NA NA NA set by coll graph number of buffers

Displays the number of buffers that are currently

available.

Collector: NWCollServer
NWSDiskReads Y con NA NA NA set by coll graph number of reads

Displays the number of disk reads that have been

performed since the NW_SERVER application was
initiated.

Collector: NWCollServer
NWSDiskWrites Y con NA NA NA set by coll graph number of writes

Displays the number of disk writes that have been

performed since the NW_SERVER application was
initiated.

Collector: NWCollServer
Table 25 PATROL for Netware 1.6.00 (Part 33 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWSFileSysReads Y con NA NA NA set by coll graph number of reads

Displays the number of file system reads that have been

performed since the NW_SERVER application was
instantiated.

Collector: NWCollServer
NWSFreeKBs Y con NA NA NA set by coll graph KB

Displays the amount of free memory that is available.

Collector: NWCollServer
NWSKBsRecvd Y con NA NA NA set by coll graph KB

Displays the number of kilobytes that have been received

from the network since NW_SERVER was instantiated.

Collector: NWCollServer
NWSKBsSent Y con NA NA NA set by coll graph KB

Displays the number of kilobytes that have been sent to

the network since NW_SERVER was instantiated.

Collector: NWCollServer
NWSPacketsRecvd Y con NA NA NA set by coll graph number of packets

Displays the number of packets that have been received

from the network since NW_SERVER was instantiated.

Collector: NWCollServer

PATROL Parameter Reference Manual 901

PATROL Parameter Reference Manual 902

Table 25 PATROL for Netware 1.6.00 (Part 34 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWSPacketsSent Y con NA NA NA set by coll graph number of packets

Displays the number of packets that have been sent to the

network since NW_SERVER was instantiated.

Collector: NWCollServer
NW_USERS Application Class
NWCollUsers Y coll NA NA NA 60 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_USERS application
class. It sets the NW_USERS consumer parameters.
NWUKBsReadPerMin Y con NA NA NA set by coll graph reads per min

Monitors the user files read per minute.

Collector: NWCollUsers
NWUKBsWrittenPerMin Y con NA NA NA set by coll graph writes per min

Monitors the number of user files written per minute.

Collector: NWCollUsers
NWURequestsPerMin Y con NA NA NA set by coll graph requests per min

Monitors the number of user requests per minute.

Collector: NWCollUsers
NW_VOLUME Application Class
NWCollVolume Y coll NA NA NA 60 min none none

Obtains data by sending an event to the PATROL Event

Manager requesting data for the NW_VOLUME
application class. It sets the NW_VOLUME consumer
parameters.
Table 25 PATROL for Netware 1.6.00 (Part 35 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWVAvailDirSlots Y con NA NA NA set by coll graph number of slots

Monitors the number of available directory slots on the

volume.

Collector: NWCollVolume
NWVAvailKBs Y con NA NA NA set by coll graph KB

Monitors the number of kilobytes available on the

volume.

Collector: NWCollVolume
NWVFreeKBs Parameter Y con NA NA NA set by coll graph KB

Monitors the number of free kilobytes available on the

volume.

Collector: NWCollVolume
NWVNotYetPurgKBs Y con NA NA NA set by coll graph KB

Monitors the number of kilobytes that have not yet been

purged from the volume.

Collector: NWCollVolume
NWVPurgKBs Y con NA NA NA set by coll graph KB

Monitors the number of kilobytes purged from the

volume.

Collector: NWCollVolume

PATROL Parameter Reference Manual 903

PATROL Parameter Reference Manual 904

Table 25 PATROL for Netware 1.6.00 (Part 36 of 36)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NWVTotalDirSlots Y con NA NA NA set by coll graph number of slots

Monitors the total number of directory slots on the

volume.

Collector: NWCollVolume
NWVTotalKBs Y con NA NA NA set by coll graph KB

Monitors the total number of kilobytes in the volume.

Collector: NWCollVolume
NWVUsedKBs Y con NA NA NA set by coll graph KB

Monitors the number of kilobytes used on the volume.

Collector: NWCollVolume
NWVUsedDirSlots Y con NA NA NA set by coll graph number of slots

Monitors the total number of used directory slots on the

volume.

Collector: NWCollVolume
PATROL for OpenVMS 2.6.00

Table 26 PATROL for OpenVMS 2.6.00 (Part 1 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
VMS Computer Class
SNMPStart Y std undef undef undef undef none none

Starts the SNMP Master Agent.

VMS_CLUSTER Application Class
CLUCPUBusy Y con undef undef undef set by coll graph percentage of CPU in
use
Displays the percentage of CPU in use. The amount of
CPU includes activity in all processor modes (except idle
time) for each node.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 905

PATROL Parameter Reference Manual 906

Table 26 PATROL for OpenVMS 2.6.00 (Part 2 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
CLUEnqDeqRate Y con undef undef undef set by coll graph ENQs, DEQs per sec

Displays the rate of all local incoming and outgoing

ENQs, DEQs, and conversions per second.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
CLUMemoryInUse Y con undef undef undef set by coll graph percentage of
memory in use on
Displays the percentage of memory in use on each node. each node
The percentage calculation is 100% minus the ratio of the
free list size to the total available memory.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
CLUmembers Y con NA NA NA set by coll text member names

Lists the number of cluster.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 3 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
VMS_CPU Application Class
CPUAVEExecutiveMode Y con undef 60–80 81–100 set by coll graph average percentage
warn alarm of time all CPUs
Displays the average percentage of time that all CPUs spent in executive
spent in executive mode; it is calculated by adding the mode
CPUExecutiveMode parameter values for each CPU and
dividing by the number of CPUs.

This parameter appears the VMS_CPU application

container window.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
CPUAVEIdleMode Y con NA undef undef set by coll graph average percentage
of time all CPUs
Displays the average percentage of time that all CPUs execute in idle loop
execute in idle loop mode; it is calculated by adding the mode
CPUIdleMode parameter values for each CPU and
dividing by the number of CPUs.This parameter
measures the average available CPU cycles when
processes are not blocked because of memory or IO
limitations. A MONITOR data file is placed in the
directory defined by the logical PATROL$LOG. The file
name is CPUIdleModeAgentHostnameAgentPort.dat.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 907

PATROL Parameter Reference Manual 908

Table 26 PATROL for OpenVMS 2.6.00 (Part 4 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
CPUAVEInterruptStack Y con 0–100 20–30 30–100 set by coll graph average percentage
alarm warn alarm of time all CPUs
Displays the average percentage of time all CPUs execute execute on the
on the interrupt stack; it is calculated by adding the interrupt stack
CPUInterruptStack parameter values for each CPU and
dividing by the number of CPUs. A MONITOR data file
is placed in the directory defined by the logical
PATROL$LOG. The file name is
CPUInterruptStackAgentHostnameAgentPort.dat.

Collector: SYSreadMonBinaryColl
CPUAVEKernelMode Y con 0–100 30–40 40–100 NA graph average percentage
alarm warn alarm of time all CPUs
Displays the average percentage of time all CPUs execute execute in kernel
in kernel mode; it is calculated by adding the mode
CPUKernelMode parameter values for each CPU and
dividing by the number of CPUs. A MONITOR data file
is placed in the directory defined by the logical
PATROL$LOG. The file name is
CPUKernelModeAgentHostnameAgentPort.dat.

Collector: SYSreadMonBinaryColl
CPUAVEMPSync Y con 0–100 10–14 15–100 set by coll graph average percentage
alarm warn alarm of time all CPUs
Displays the average time all CPUs spent synchronizing spent synchronizing
multiple CPUs; it is calculated by adding the multiple CPUs
CPUMPSync parameter values for each CPU and
dividing by the number of CPUs.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 5 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
CPUAVESupervisorMode Y con undef 60–80 80–100 set by coll graph average percentage
warn a;arm of time all CPUs
Displays the average percentage of time all CPUs spent in spent in supervisor
supervisor mode; it is calculated by adding the mode
CPUSupervisorMode parameter values for each CPU and
dividing by the number of CPUs.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
CPUAVEUserMode Y con undef undef undef set by coll graph average percentage
of time all CPUs
Displays the average percentage of time all CPUs spent in spent in user mode
user mode executing instructions; it is calculated by
adding the CPUUserMode parameter values for each
CPU and dividing by the number of CPUs.

Note: You must set up the alert range for this parameter
before monitoring it.

Collector: SYSreadMonBinaryColl
CPUErrCount Y con 0–100 1–100 undef set by discovery graph number of errors
alarm alarm
Displays the number of CPU errors by executing the
OpenVMS show error command.

Collector: application discovery

CPUExecutiveMode Y con undef 60–80 81–100 set by coll graph percentage of time
warn alarm spent in executive
Displays the percentage of time spent in executive mode. mode

Note: You must set up the alert range for this parameter
before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 909

PATROL Parameter Reference Manual 910

Table 26 PATROL for OpenVMS 2.6.00 (Part 6 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
CPUIdleMode Y con undef 0–15 10–15 set by coll graph percentage of time
alarm warn the CPU executes in
Displays the percentage of time the CPU executes in the idle loop
idle loop; measures the available CPU cycle when
processes are not blocked because of memory or IO
limitations. A MONITOR data file is placed in the
directory defined by the logical PATROL$LOG. The file
name is CPUIdleMode AgentHostname AgentPort.dat.

Collector: SYSreadMonBinaryColl
CPUInterruptStack Y con 0–100 20–30 30–100 NA graph percentage of time
alarm warn alarm the CPU executes on
Displays the percentage of time the CPU executes on the the interrupt stack
interrupt stack. A MONITOR data file is placed in the
directory defined by the logical PATROL$LOG. The file
name is CPUInterruptStack AgentHostname
AgentPort.dat.

Collector: SYSreadMonBinaryColl
CPUKernelMode Y con 0–100 30–40 40–100 set by coll graph percentage of time
alarm warn alarm the CPU executes in
Displays the percentage of time the CPU executes in kernel mode
kernel mode. A MONITOR data file is placed in the
directory defined by the logical PATROL$LOG. The file
name is CPUKernelMode AgentHostname
AgentPort.dat.

Collector: SYSreadMonBinaryColl
CPUMPSync Y con 0–100 10–15 15–100 set by coll graph percentage of time
alarm warn alarm spent synchronizing
Displays the time spent synchronizing multiple CPUs. multiple CPUs

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 7 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
CPUSupervisorMode Y con undef 60–80 80–100 set by coll graph percentage of time
warn alarm the CPU spent in
Displays the percentage of time that the CPU spent in supervisor mode
supervisor mode.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
CPUUserMode Y con undef undef undef set by coll graph percentage of time
the CPU spent in user
Displays the percentage of time that the CPU spent in mode executing
user mode executing instructions. instructions

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMS_FILESYSTEM Application Class
BitmapAttempt Y con undef undef undef set by coll graph attempts per sec

Displays the rate at which attempts were made to find

entries in the bitmap cache.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 911

PATROL Parameter Reference Manual 912

Table 26 PATROL for OpenVMS 2.6.00 (Part 8 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
BitmapCacheHit Y con undef undef undef set by coll graph percentage of entry
hits on the bitmap
Displays the percentage of entry hits on the bitmap cache; cache
the percentage calculation is the ratio of hits to the sum of
hits plus misses.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
DirDataAttempt Y con undef undef undef set by coll graph attempts per sec

Displays the rate at which attempts were made to find

directory data in the directory cache.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
DirDataCacheHit Y con undef undef undef set by coll graph percentage of
directory data hits on
Displays the percentage of directory data hits on the the directory cache
directory cache; the percentage calculation is the ratio of
the hits to the sum of hits plus misses.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 9 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
DirFCBAttempt Y con undef undef undef set by coll graph attempts per sec

Displays the rate at which attempts were made to find

directory file control blocks in the directory cache.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
DirFCBCacheHit Y con undef undef undef set by coll graph percentage of
directory file control
Displays the percentage of directory file control block hits block hits on the
on the directory cache; the percentage calculation is the directory cache
ratio of hits to the sum of hits plus misses.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
ExtentAttempt Y con undef undef undef set by coll graph attempts per sec

Displays the rate at which attempts were made to find

appropriate size extents in the extent cache.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 913

PATROL Parameter Reference Manual 914

Table 26 PATROL for OpenVMS 2.6.00 (Part 10 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
ExtentCacheHit Y con undef undef undef set by coll graph percentage of
appropriate size
Displays the percentage of appropriate size extent hits on extent hits on the
the extent cache; the percentage calculation is the ratio of extent cache
hits to the sum of hits plus misses.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FileHdrAttempt Y con undef undef undef set by coll graph attempts per sec

Displays the rate at which attempts were made to find file

headers in the file header cache.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FileHdrCacheHit Y con undef undef undef set by coll graph percentage of file
header hits on the file
Displays the percentage of file header hits on the file header cache
header cache; the percentage calculation is the ratio of
hits to the sum of hits plus misses.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 11 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
FileIDAttempt Y con undef undef undef set by coll graph attempts per sec

Displays the rate at which attempts were made to find file

identifiers in the file ID cache.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FileIDCacheHit Y con undef undef undef set by coll graph percentage of file
identifier hits on the
Displays the percentage of file identifier hits on the file ID file ID cache
cache; the percentage calculation is the ratio of hits to the
sum of hits plus misses.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FSAllocationRate Y con undef undef undef set by coll graph calls per sec

Displays the rate of calls that caused allocation of disk

space.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 915

PATROL Parameter Reference Manual 916

Table 26 PATROL for OpenVMS 2.6.00 (Part 12 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
FSCPUTickRate Y con undef undef undef set by coll graph CPU time in ticks

Displays the rate at which CPU time was used by the file
system (in 10-millisecond ticks).

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FSCreateRate Y con undef undef undef set by coll graph files per sec

Displays the rate at which new files were created.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FSEraseRate Y con undef undef undef set by coll graph erase operations per
sec
Displays the rate of erase operations issued by the file
system.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FSFCPCallRate Y con undef undef undef set by coll graph requests per sec

Displays the rate at which QIO requests were received by

the file system.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 13 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
FSFileLookupRate Y con undef undef undef set by coll graph lookup operations
per sec
Displays the rate of file name lookup operations in file
directories.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FSFileOpenRate Y con undef undef undef set by coll graph files per sec

Displays the rate at which files were opened.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FSPageFaultRate Y con undef undef undef set by coll graph page faults per sec

Displays the rate at which page faults occurred in the file

system.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 917

PATROL Parameter Reference Manual 918

Table 26 PATROL for OpenVMS 2.6.00 (Part 14 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
FSVolumeLockWait Y con undef undef undef set by coll graph locks per sec

Displays the rate of entry into a wait state due to

contention for a volume synchronization lock. Volume
synchronization locks are taken by the XQP during file
creation, deletion, extension, and truncation operations.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FSWindowTurnRate Y con undef undef undef set by coll graph window misses per
sec
Displays the rate of file map window misses.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
QuotaAttempt Y con undef undef undef set by coll graph attempts per sec

Displays the rate at which attempts were made to find

entries in the quota cache.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 15 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
QuotaCacheHit Y con undef undef undef set by coll graph percentage of quota
entry hits on the
Displays the percentage of quota entry hits on the quota quota cache
cache; the percentage calculation is the ratio of hits to the
sum of hits plus misses.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMS_IO Application Class
VMSIOBufferedIoRate Y con undef undef undef set by coll graph operations per sec

Displays the number of buffered IO operations

performed per second on the system.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMSIODirectIoRate Y con undef undef undef set by coll graph IO operations per sec

Displays the number of direct IO operations performed

per second on the system. You should use PATROL
history or MONITOR to determine normal operating
values for this parameter; then adjust the alert range
accordingly to trigger an alert and a recovery. MONITOR
data files are placed in the directory defined by the logical
PATROL$LOG. The file name is VMSIODirectIoRate
AgentHostname AgentPort.dat.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 919

PATROL Parameter Reference Manual 920

Table 26 PATROL for OpenVMS 2.6.00 (Part 16 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
VMSIOFileOpenRate Y con undef undef undef set by coll graph files per sec

Displays the rate at which files were opened.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMSIOFreeListSize Y con undef undef undef set by coll graph number of pages

Displays the pages on the free page list.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMSIOInswapRate Y con undef undef undef set by coll graph working sets per sec

Displays the rate at which working sets are read into

memory from the swap file.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMSIOLogNamTransRate Y con undef undef undef set by coll graph LOGICAL NAME
translations per sec
Displays the rate of logical name translations.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 17 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
VMSIOMbxWriteRate Y con undef undef undef set by coll graph requests per sec

Displays the rate of write to mailbox requests received by

the system.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMSIOModListSize Y con undef undef undef set by coll graph number of pages

Displays the number of pages on the modified page list.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMSIOSplitXferRate Y con undef undef undef set by coll graph split IOs per sec

Displays the rate at which transfers were split into

multiple IOs.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMS_LOGS Application Class
VMSLogFileSize Y con undef undef undef set by coll graph number of blocks

Displays the size of the log file in blocks.

Collector: VMS_LOGS discovery

PATROL Parameter Reference Manual 921

PATROL Parameter Reference Manual 922

Table 26 PATROL for OpenVMS 2.6.00 (Part 18 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
VMS_MEMORY Application Class
DZeroFaultRate Y con undef undef undef set by coll graph pages per sec

Displays the rate at which zero-filled pages were

allocated as a result of page faults.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FreeListFaultRate Y con undef undef undef set by coll graph pages per sec

Displays the rate at which pages were read from the free
page list as a result of page faults.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
FreeListSize Y con undef undef undef set by coll graph number of pages

Displays the number of pages on the free page list.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 19 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
GlobalValidFaultRate Y con undef undef undef set by coll graph page faults per sec

Displays the rate of page faults for pages that are not in
the process's working set but are in physical memory and
are indicated as valid pages in the system-wide global
page tables.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
MEMErrCount Y con 0–1 undef undef set by coll graph number of errors
warn
Displays the number of memory errors returned by the
VMS show errors command.

Collector: application discovery

MEMFreePageWait Y con undef 5–10 10–20 set by coll graph number of processes
warn alarm
Displays the number of processes that are waiting for free
memory page.

Collector: SYSreadMonBinaryColl
MEMMemoryUsed Y con 0–100 85–95 95–100 set by coll graph percentage of
alarm warn alarm physical memory in
Displays the percentage of physical memory in use. use

Collector: SYSShowMemColl

PATROL Parameter Reference Manual 923

PATROL Parameter Reference Manual 924

Table 26 PATROL for OpenVMS 2.6.00 (Part 20 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
MEMPageFaultRate Y con undef undef undef NA graph page faults per sec

Displays the page fault rate for the system. A MONITOR

data file is placed in the directory defined by the logical
PATROL$LOG. The file name is MEMPageFaultRate.dat.
Use PATROL history or MONITOR to determine normal
operating values for this parameter; then adjust the
output range accordingly to trigger an alert and a
recovery.

Collector: SYSreadMonBinaryColl
MEMPageFileUsed Y std 0–100 90–95 95–100 10 min graph percentage of used
alarm warn alarm page file space
Displays the percentage of used page file space.
MEMPageReadIORate Y con undef undef undef set by coll graph IO operations per sec

Displays the percentage of read IO operations per second

to the total page fault rate. A MONITOR data file is
placed in the directory defined by the logical
PATROL$LOG. The file name is
MEMPageReadIoRate.dat.

Collector: SYSreadMonBinaryColl
MEMPageReadRate Y con undef undef undef set by coll graph pages per sec

Displays the rate of pages read from disk as a result of

page faults.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 21 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
MEMPageWriteIORate Y con undef undef undef set by coll graph IO operations per sec

Displays the rate of write IO operations to the page file.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
MEMPageWriteRate Y con undef undef undef set by coll graph pages per sec

Displays the rate at which pages were written to the page

file.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
MEMSwapFileUsed Y std 0–100 90–95 95–100 10 min graph percentage of used
alarm warn alarm swap file space
Displays the percentage of used swap file space.

Note:You must set up the alert range of this parameter

before monitoring it.
ModifiedListFaultRate Y con undef undef undef set by coll graph pages per sec

Displays the rate of pages read from the modified page

list as a result of page faults.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 925

PATROL Parameter Reference Manual 926

Table 26 PATROL for OpenVMS 2.6.00 (Part 22 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
ModifiedListSize Y con undef undef undef set by coll graph number of pages

Displays the number of pages on the modified page list.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMS_NETWORK Application Class
NETDECnetBuffFailure Y con undef undef undef set by coll graph buffer failures per sec

Displays the rate of DECnet receiver buffer failures.

Note: You must set up the alert range for this parameter
before monitoring it.

Collector: SYSreadMonBinaryColl
NETDECnetCongLoss Y con undef undef undef set by coll graph transit loss per sec

Displays the rate of DECnet transit congestion losses.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
NETDECnetPcktsRcv Y con undef undef undef set by coll graph packets per sec

Displays the rate at which local DECnet packets are being

received.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 23 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
NETDECnetPcktsXmt Y con undef undef undef set by coll graph packets per sec

Displays the rate at which local DECnet packets are being

sent.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
NETDECnetXPcktsRcv Y con undef undef undef set by coll graph packets per sec

Displays the rate at which remote DECnet packets are

being sent through the system.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMS_PATROLAGENT Application Class
PADeltaBetweenExecSecs Y std NA NA NA 15 min graph number of sec
between execution
Displays the number of seconds between executions. This
value is the RUNQ_DELTA variable.
PAInternalErrors Y std NA NA NA 30 min gauge number of
miscellaneous errors
Displays the number of miscellaneous internal errors in in the PATROL
the PATROL Agent. Agent
PAOutstandingJobs Y std NA NA NA 5 min graph number of currently
executing jobs on the
Displays the number of currently executing jobs on the PATROL Agent
PATROL Agent and the times they were executed.

PATROL Parameter Reference Manual 927

PATROL Parameter Reference Manual 928

Table 26 PATROL for OpenVMS 2.6.00 (Part 24 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
PATotalErrors Y std NA NA NA 45 min gauge number of errors
detected by the
Displays the total number of errors detected by the PATROL Agent
PATROL Agent.
PAUserErrors Y std NA NA NA 30 min gauge number of errors that
have occurred with
Displays the number of errors that have occurred with user-specified
user-specified commands in the PATROL Agent. These commands in the
commands can be commands or tasks that you executed PATROL Agent
through interactive command dialog boxes, command
windows, task windows, or user-defined menu items.
PAWorkRateExecsMin Y std NA 20–25 25–60 2 min graph number of executions
warn alarm performed per
Displays the number of instruction executions performed minute by the
per minute by the PATROL Agent. PATROL Agent
PAHistoryIndexSize Y std NA 900000–950000 950000–999999 10 min graph bytes
bytes bytes
Displays the size of the PATROL Agent history index, warn alarm
which is the history database pointer file, DIR.IDX.
VMS_PROCESS Application Class
PROCCollidedPageWait Y con undef undef undef set by coll graph number of processes
waiting
Displays the number of processes that are waiting for a
faulted page in transition.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 25 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
PROCComputeState Y con undef undef undef set by coll graph number of processes
in COM or COMO
Displays the number of processes that are in COM or state
COMO state.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
PROCFreePageWait Y con undef undef undef set by coll graph number of processes
waiting
Displays the number of processes that are waiting for a
free page of memory.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 929

PATROL Parameter Reference Manual 930

Table 26 PATROL for OpenVMS 2.6.00 (Part 26 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
PROCFreeProcessSlots Y con undef 5–10 0–4 set by coll graph number of free
warn alarm process slots
Displays the number of free process slots.

Collector: SYSreadMonBinaryColl
PROCMwaitState Y con undef 1–2 above 2 set by coll gauge number of processes
warn alarm waiting
Displays the number of processes that are waiting for the
availability of a mutual exclusion semaphoring a
dynamic resource. A MONITOR data file is placed in the
directory defined by the logical PATROL$LOG. The file
name is PROCMwaitState.dat.

Collector: SYSreadMonBinaryColl
PROCPageFaultWait Y con undef undef undef set by coll graph number of processes
waiting
Displays the number of resident processes that are
waiting for a page to be read as a result of a page fault.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
PROCProcessCount Y con undef undef undef set by coll gauge number of processes
currently running
Displays the number of processes that are currently
running on the system.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 27 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
PROCSuspended Y con undef undef undef set by coll graph number of processes
that executed a
Displays the number of resident processes that have suspended request
executed a suspended request.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMS_PROCESS_PRESENCE Application Class
PROCBufIO Y con undef undef undef set by graph I/Os per sec
VMS_PROCESS
Displays the rate at which buffered I/Os are being used _PRESENCE_C
for the monitored process. OLL.km
discovery
PROCDirIO Y con undef undef undef set by graph I/Os per sec
VMS_PROCESS
Displays the rate at which direct I/Os are being used for _PRESENCE_C
the monitored process. OLL.km
discovery
PROCCPUPerc Y con undef undef undef set by graph percentage of total
VMS_PROCESS CPU
Displays the total percentage of CPU which is being used _PRESENCE_C
by the monitored process. OLL.km
discovery
PROCPageFaults Y con undef undef undef set by graph page faults per sec
VMS_PROCESS
Displays the number of page faults per second used by _PRESENCE_C
the monitored process. OLL.km
discovery
PROCPWSPeak Y con undef undef undef set by graph number of pages
VMS_PROCESS
Displays the working set peak of the monitored process. _PRESENCE_C
OLL.km
discovery

PATROL Parameter Reference Manual 931

PATROL Parameter Reference Manual 932

Table 26 PATROL for OpenVMS 2.6.00 (Part 28 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
PROCPWSSize Y con undef undef undef set by graph number of pages
VMS_PROCESS
Displays the working set size of the monitored process. _PRESENCE_C
OLL.km
discovery
PROCProcessCount Y con 0–100 0–0 2–100 set by graph number of pages
VMS_PROCESS
Displays the number of processes found on a system _PRESENCE_C
which have an identical name, and have been spawned OLL.km
by the same username. discovery

Note:When this parameter goes into a warn state, the KM

stops updating and populating the rest of the
VMS_PROCESS parameters. These parameters will retain
the values they had before the PROCProcessCount
parameter went into a warn state.
VMS_QUEUE Application Class
There are no parameters associated with the VMS_QUEUE application class.
VMS_QUEUE_BATCH Application Class
VMSQQueueLength Y con undef undef undef set by coll gauge number of jobs in
queue
Displays the total number of jobs in the printer or batch
queue. This number includes the jobs pending, jobs
holding, and jobs executing.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 29 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
VMS_QUEUE_PRINTER Application Class
VMSQQueueLength Y con undef undef undef set by coll gauge number of jobs is
queue
Displays the number of jobs in the printer or batch queue.
This number includes the jobs pending, jobs holding, and
jobs executing.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMS_RMS Application Class
RMSBlksPerExtend Y con undef undef undef set by coll graph blocks per call

Displays the average blocks per $Extend call on a

particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSBlksPerTrunc Y con undef undef undef set by coll graph blocks per call

Displays the blocks per $Truncate call on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl

PATROL Parameter Reference Manual 933

PATROL Parameter Reference Manual 934

Table 26 PATROL for OpenVMS 2.6.00 (Part 30 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
RMSBlockingASTRate Y con undef undef undef set by coll graph ASTs per sec

Displays the blocking AST rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSBucketSplit Y con undef undef undef set by coll graph splits per sec

Displays the bucket split rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSBytesPerGet Y con undef undef undef set by coll graph bytes per call

Displays the average number of bytes per $Get call on a

particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSBytesPerPut Y con undef undef undef set by coll graph bytes per call

Displays the average number of bytes per $Put call on a

particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 31 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
RMSBytesPerRead Y con undef undef undef set by coll graph bytes per call

Displays the average number of bytes per read on a

particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSBytesPerUpdate Y con undef undef undef set by coll graph bytes per call

Displays the average number of bytes per $Update call on

a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSBytesPerWrite Y con undef undef undef set by coll graph bytes per call

Displays the average number of bytes per write on a

particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSConvertedENQRate Y con undef undef undef set by coll graph ENQs per sec

Displays the converted ENQ rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl

PATROL Parameter Reference Manual 935

PATROL Parameter Reference Manual 936

Table 26 PATROL for OpenVMS 2.6.00 (Part 32 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
RMSDeleteCallRate Y con undef undef undef set by coll graph calls per sec

Displays the $Delete call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSDEQRate Y con undef undef undef set by coll graph DEQs per sec

Displays the DEQ rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSExtendCallRate Y con undef undef undef set by coll graph calls per sec

Displays the $Extend call rate on a particular file. Set up

the alert range of this parameter before monitoring it.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSFileColl Y coll undef undef undef 25 min none none

Works cooperatively with RMSStartMonRMSFiles to

present the statistics of individual RMS files. The
parameter opens the summary data file that was
generated by RMSStartMonRMSFiles, sets the values of
the consumer parameters, then deletes the summary data
file after sending values to the consumers.
Table 26 PATROL for OpenVMS 2.6.00 (Part 33 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
RMSFlushCallRate Y con undef undef undef set by coll graph calls per sec

Displays the $Flush call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSGlobalBufRead Y con undef undef undef set by coll graph read I/Os per sec

Displays the global buffer read IO rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSGlobalBufWrite Y con undef undef undef set by coll graph write I/Os per sec

Displays the global buffer write IO rate on a particular

file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSGlobalCacheAttempt Y con undef undef undef set by coll graph attempts per sec

Displays the global cache attempt rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl

PATROL Parameter Reference Manual 937

PATROL Parameter Reference Manual 938

Table 26 PATROL for OpenVMS 2.6.00 (Part 34 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
RMSGlobalCacheHit Y con undef undef undef set by coll graph percentage of global
cache hits on a
Displays the percentage of global cache hits on a particular file
particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSKeyFindCallRate Y con undef undef undef set by coll graph calls per sec

Displays the keyed $Find call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSKeyGetCallRate Y con undef undef undef set by coll graph calls per sec

Displays the keyed $Get call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSKeyPutCallRate Y con undef undef undef set by coll graph calls per sec

Displays the keyed $Put call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 35 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
RMSLocalBufRead Y con undef undef undef set by coll graph read I/Os per sec

Displays the local read I/O rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSLocalBufWrite Y con undef undef undef set by coll graph write I/Os per sec

Displays the local buffer write I/O rate on a particular

file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSLocalCacheAttempt Y con undef undef undef set by coll graph percentage of local
cache attempted
Displays the local cache attempt rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSLocalCacheHit Y con undef undef undef set by coll graph percentage of local
hits
Displays the percentage of local cache hits on a particular
file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl

PATROL Parameter Reference Manual 939

PATROL Parameter Reference Manual 940

Table 26 PATROL for OpenVMS 2.6.00 (Part 36 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
RMSMultiBucketSplit Y con undef undef undef set by coll graph splits per sec

Displays the multibucket split rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSNewENQRate Y con undef undef undef set by coll graph ENQs per sec

Displays the new ENQ rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSReadCallRate Y con undef undef undef set by coll graph calls per sec

Displays the $Read call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSRfaFindCallRate Y con undef undef undef set by coll graph calls per sec

Displays the RFA $Find call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 37 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
RMSRfaGetCallRate Y con undef undef undef set by coll graph calls per sec

Displays the RFA $Get call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSSeqFindCallRate Y con undef undef undef set by coll graph call per sec

Displays the sequential $Find call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSSeqGetCallRate Y con undef undef undef set by coll graph calls per sec

Displays the sequential $Get call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSSeqPutCallRate Y con undef undef undef set by coll graph calls per sec

Displays the sequential $Put call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl

PATROL Parameter Reference Manual 941

PATROL Parameter Reference Manual 942

Table 26 PATROL for OpenVMS 2.6.00 (Part 38 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
RMSTrunCallRate Y con undef undef undef set by coll graph calls per sec

Displays the $Truncate call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSUpdateCallRate Y con undef undef undef set by coll graph calls per sec

Displays the $Update call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
RMSWriteCallRate Y con undef undef undef set by coll graph calls per sec

Displays the $Write call rate on a particular file.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: RMSFileColl
VMS_SCS Application Class
SCSBuffDscRate Y con undef undef undef set by coll graph buffer descriptors per
sec
Displays the SCS queued for buffer descriptor rate for a
particular node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 39 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
SCSDGDiscardRate Y con undef undef undef set by coll graph datagrams per sec

Displays the SCS datagram discard rate for a particular

node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SCSDGRcvRate Y con undef undef undef set by coll graph datagrams per sec

Displays the SCS datagram receive rate for a particular

node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SCSDGSendRate Y con undef undef undef set by coll graph datagrams per sec

Displays the SCS datagram send rate for a particular

node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SCSKbyteSendRate Y con undef undef undef set by coll graph datagrams per sec

Displays the SCS datagram send rate for a particular

node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 943

PATROL Parameter Reference Manual 944

Table 26 PATROL for OpenVMS 2.6.00 (Part 40 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
SCSKbytesMapRate Y con undef undef undef set by coll graph KB maps per sec

Displays the SCS kilobyte map rate for a particular node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SCSKbytesReqRate Y con undef undef undef set by coll graph requests per sec

Displays the SCS kilobyte request rate for a particular

node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SCSMsgRcvRate Y con undef undef undef set by coll graph messages per sec

Displays the SCS message receive rate for a particular

node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SCSMsgSendRate Y con undef undef undef set by coll graph messages per sec

Displays the SCS message send rate for a particular node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 41 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
SCSReqDataRate Y con undef undef undef set by coll graph requests per sec

Displays the SCS request data rate for a particular node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SCSSendCreditRate Y con undef undef undef set by coll graph send credits per sec

Displays the SCS queued for send credit rate for a

particular node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SCSSendDataRate Y con undef undef undef set by coll graph sent data per sec

Displays the SCS send data rate for a particular node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VMS_SYSTEM Application Class
DeadlockMsgRate Y con undef undef 51–100 set by coll graph messages per sec
warn
Displays the rate of incoming and outgoing messages
required for deadlock detection.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 945

PATROL Parameter Reference Manual 946

Table 26 PATROL for OpenVMS 2.6.00 (Part 42 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
MSCPBuffWaitRate Y con undef undef undef set by coll graph buffer waits per sec

Displays the rate at which buffer waits occur in the

server. A buffer wait occurs when a request must wait for
MSCP buffer memory.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
MSCPExtraFragRate Y con undef undef undef set by coll graph fragments per sec

Displays the rate at which the server issues extra

fragments. One or more extra fragments are created
when, because of buffering constraints, the MSCP Server
issues multiple IOs to fulfill a single IO request.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
MSCPFragmentedReqRate Y con undef undef undef set by coll graph requests per sec

Displays the rate at which fragmented requests occur. A

fragmented request is a transfer that the server fragments
because of buffering constraints.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 43 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
MSCPReadReqRate Y con undef undef undef set by coll graph requests per sec

Displays the rate at which remote processor read IO

transfers.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
MSCPReqSize_1 Y con undef undef undef set by coll graph requests per sec

Displays the number of I/O requests per second for

packets whose sizes are less than or equal to 1 block.
These requests are made by other members of the clusters
to a local drive on the local node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
MSCPReqSize_16-31 Y con undef undef undef set by coll graph requests per sec

Displays the number of I/O requests per second for

packets whose sizes are between 16 and 31 blocks.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 947

PATROL Parameter Reference Manual 948

Table 26 PATROL for OpenVMS 2.6.00 (Part 44 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
MSCPReqSize_2-3 Y con undef undef undef set by coll graph requests per sec

Displays the number of I/O requests per second for

packets whose sizes are between 2 and 3 blocks. These
requests are made by other members of the clusters to a
local drive on the local node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
MSCPReqSize_32-63 Y con undef undef undef set by coll graph requests per sec

Displays the number of I/O requests per second for

packets whose sizes are between 23 and 63 blocks. These
requests are made by other members of the clusters to a
local drive on the local node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
MSCPReqSize_4-7 Y con undef undef undef none graph requests per sec

Displays the number of I/O requests per second for

packets whose sizes are between 4 and 7 blocks. These
requests are made by other members of the clusters to a
local drive on the local node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 45 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
MSCPReqSize_64Plus Y con undef undef undef none graph requests per sec

Displays the number of I/O requests per second for

packets whose sizes are greater than or equal to 64 blocks.
These requests are made by other members of the clusters
to a local drive on the local node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
MSCPReqSize_8-15 Y con undef undef undef none graph requests per sec

Displays the number of I/O requests per second for

packets whose sizes are between 8 and 15 blocks. These
requests are made by other members of the clusters to a
local drive on the local node.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
MSCPServerIOReqRate Y con undef undef undef none graph requests per sec

Displays the number of remote processor MSCP IO

request transfers per second.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 949

PATROL Parameter Reference Manual 950

Table 26 PATROL for OpenVMS 2.6.00 (Part 46 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
MSCPWriteReqRate Y con undef undef undef none graph requests per sec

Displays the rate at which remote processors request

write MSCP IO transfers.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SYSBlkASTIncoming Y con undef undef undef set by coll graph ASTs per sec

Displays the rate of lock manager blocking ASTs that

originate from other systems and are performed on this
system.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SYSBlkASTOutgoing Y con undef undef undef set by coll graph ASTs per sec

Displays the rate of lock manager blocking ASTs that

originate from this system and are performed on another
system.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 47 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
SYSBlockingAST Y con undef undef undef set by coll graph ASTs per sec

Displays the rate of lock manager blocking ASTs that

originate from and are performed on this system.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SYSConENQIncoming Y con undef undef undef set by coll graph requests per sec

Displays the rate of lock conversion requests that

originate from other systems and are performed on this
system.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SYSConENQOutgoing Y con undef undef undef set by coll graph requests per sec

Displays the rate of lock conversion requests that

originate from this system and are performed on another
system.

Collector: SYSreadMonBinaryColl
SYSConvertedENQ Y con undef undef undef set by coll graph requests per sec

Displays the rate of lock conversion requests that

originate from, and are performed, on this system.

Note:You must set up the alert range for this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 951

PATROL Parameter Reference Manual 952

Table 26 PATROL for OpenVMS 2.6.00 (Part 48 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
SYScreateMonBinaryColl Y coll NA NA NA 1 hr. none NA

Continuously runs the monitor utility to collect data and

load it into a file for use by the SYSreadMonBinaryColl
collector. This collector will start the monitor collector if it
is not running.
SYSDEQOutgoing Y con undef undef undef set by coll graph requests per sec

Displays the rate of unlock requests that originate from

this system and are performed on another system.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SYSDEQRate Y con undef undef undef set by coll graph requests per sec

Displays the rate of unlock requests that originate from,

and are performed on, this system.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SYSDEQRateIncoming Y con undef undef undef set by coll graph requests per sec

Displays the rate of unlock requests that originate from

another system and are performed on this system.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 49 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
SYSInteractiveLogins Y std undef 2–5 0–2 46 min graph number of inactive
warn alarm logins
Displays the number of interactive logins available for
use.
SYSNewENQRate Y con undef undef undef set by coll graph number per sec

Displays the number of new lock requests that originate

from and are performed on this system per second.

Collector: SYSreadMonBinaryColl
SYSNewENQRateIncoming Y con undef undef undef set by coll graph requests per sec

Displays the rate of new lock requests that originate from

other systems and are performed on this system.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SYSNewENQRateOutgoing Y con undef undef undef set by coll graph requests per sec

Displays the rate of new lock requests that originate from

this system and are performed on another system.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
SYSreadMonBinaryColl Y coll NA NA NA 10 min none NA

Periodically reads from the file created by the

SYScreateMonBinaryColl collector and loads the data into
consumer parameters.

PATROL Parameter Reference Manual 953

PATROL Parameter Reference Manual 954

Table 26 PATROL for OpenVMS 2.6.00 (Part 50 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
SYSSetupColl Y coll undef undef undef 23 hr, 59 min, none NA
59 sec
Sets the values of InfoBox items in various applications.
SYSShowMemColl Y coll NA NA NA 30 min none NA

Executes the SHOW MEMORY command and collects the

data from the output.
VMS_VOLUMES_Instance Application Class
VOLErrCount Y con undef undef undef set by coll gauge number of errors

Displays the number of errors accumulated on a

particular disk volume. The parameter value will be
updated only when the error count of the volume has
changed.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VOLIOOperRate Y con undef undef undef set by coll gauge IO operations per
second
Displays the rate at which IO operations occur on each
disk. By comparing operation rates for all disks in the
system, you can tell which disks are busy and which are
idle.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
Table 26 PATROL for OpenVMS 2.6.00 (Part 51 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
VOLPctFull Y con 0–100 90–95 95–100 set by coll gauge percentage of disk
alarm warn alarm volume space used
Displays the disk volume's percentage of space used per per its total capacity
its total capacity.

Collector: SYSreadMonBinaryColl
VOLQueueLength Y con undef undef undef set by coll graph number of IRQs

Displays the number of outstanding IO request packets.

The number includes the requests currently being
serviced and those awaiting service.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VOLRespTime Y con 0–100 35–40 40–100 set by coll gauge msec
warn warn alarm
Displays the average time it takes the disk to respond to
an IO request. It is a measure of disk IO responsiveness.

Collector: SYSreadMonBinaryColl
VMS_VOLUMES_VOLUMESET Application Class
VOLSETErrCount Y con undef undef undef set by coll gauge number of errors

Displays the number of errors accumulated on a

particular bound volume set.

Collector: SYSreadMonBinaryColl

PATROL Parameter Reference Manual 955

PATROL Parameter Reference Manual 956

Table 26 PATROL for OpenVMS 2.6.00 (Part 52 of 52)

List of Output
Installation

Scheduling
(poll time)
Parameter

Icon Style
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range
Type

Unit
Parameter

or
VOLSETIOOperRate Y con undef undef undef set by coll graph IO operations per sec

Displays the rate at which IO operations occur on the

disks in the bound volume set. By comparing operation
rates for all disks in the system, you can tell which disks
are busy and which are idle.

Collector: SYSreadMonBinaryColl
VOLSETPctFull Y con 0–100 90–95 95–100 set by coll gauge percentage of space
alarm warn alarm used per total
Displays the bound volume set's percentage of space capacity
used per its total capacity.

Collector: SYSreadMonBinaryColl
VOLSETQueueLength Y con undef undef undef set by coll graph number of IRQs

Displays the number of outstanding IO request packets

for the bound volume set. The number includes the
requests currently being serviced and those awaiting
service.

Note:You must set up the alert range of this parameter

before monitoring it.

Collector: SYSreadMonBinaryColl
VOLSETRespTime Y con 0–100 35–40 40–100 set by coll graph msec
warn warn alarm
Displays the average time it takes the volume set to
respond to an IO request. It is a measure of bound
volume set IO responsiveness

Collector: SYSreadMonBinaryColl
PATROL for Oracle 8.5.10

Table 27 PATROL for Oracle 8.5.10 (Part 1 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
AVAILABILITY Application Class
Alerts Y std undef 2–4 4–6 600 sec stoplight none
warn alarm
Shows the severity of the most recent Oracle error that
was written to the alert log for this instance. Alarm means
an Oracle error in the 00600–00639 range was found in the
alert log; warning means that an Oracle error with the
filter you specified has been found.

The annotation displays the most recent ORA errors

detected in the last polling cycle, and any error log filters
that have been specified.

PATROL Parameter Reference Manual 957

PATROL Parameter Reference Manual 958

Table 27 PATROL for Oracle 8.5.10 (Part 2 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ArchFreeSpace Y con undef 0–2 2–4 set by coll graph number of logs
alarm warn
Shows the number of archive logs that can fit in the
amount of free space remaining on the archive
destination device. If the automated recovery actions
have been set, that action will be taken when this
parameter goes into alarm. The annotation displays the
destination device, the space used and the space left on
the device.

This parameter is not active for a remote instance and is

not online if operating system components are not
running. If the archive mode of the database is set to
none, ArchFreeSpace is not active. Only those
destinations whose BINDING is MANDATORY. If there
is more than one archive log destination whose BINDING
is MANDATORY, ArchFreeSpace is inactive, and a blank
destination may appear in the Archiving State report.

Collector: CollAvailability
ArchFreeSpaceETF Y con 1–3 2–2 3–3 set by coll stoplight none
warn alarm
Shows how long until no more archive logs can fit in the estimated 1–7 estimated 24
amount of free space remaining on the primary archive days until hours or less
destination device. The annotation shows the day and failure until failure
time to failure or the reason data calculation cannot be
done. This parameter is not active for a remote instance
and is not online if operating system components are not
running.

Collector: CollETF
Table 27 PATROL for Oracle 8.5.10 (Part 3 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CannotExtend Y con undef 1–1 undef set by coll bool none
alarm
Displays whether a segment in an autoextensible
tablespace cannot extend due to a lack of operating
system space or reaching the maximum space on the
tablespace. Onlypermanent autoextensible tablespaces
are monitored; if a non-autoextensible tablespace cannot
extend, the FreeSpaceDeficit parameter goes into alarm.

You must have an operating system knowledge module

loaded to display accurate information. If an OS KM is
not loaded, the information that the Oracle software
calculates is used. Not active for a remote instance.

Collector: CollAvailability
ConnectCheck Y coll NA NA NA 600 sec none none

Checks for a timestamp that is set for the ConnectDB

parameter. It then compares the timestamp from the
current time to see if more than 2 minutes have passed.
This helps determine if a database is hung, and if it is, the
channel used by ConnectDB is closed.

If you disable the ConnectDB parameter, you should also

disable the ConnectCheck parameter.

PATROL Parameter Reference Manual 959

PATROL Parameter Reference Manual 960

Table 27 PATROL for Oracle 8.5.10 (Part 4 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ConnectDB Y std undef 1 undef 900 sec bool none
alarm
Displays whether the database connection via the
PATROL channel is active. If the parameter cannot
connect to the database, it goes into alarm.

ConnectDB opens a new connection to the instance for

each polling cycle, which may result in extra entries being
added to the listener log. This is more likely to happen for
a remote instance.

Collector: none (parameter collects own value)

ExtentsLeft Y con undef 0–2 2–4 set by coll graph number of extents
alarm warn
Reports the number of extents that can be added to the
non-excluded object in a non-excluded user schema in a
non-excluded table space that has the least number of
extents left.

Tablespace, user and object exclusion are used in the

calculations.

Collector: CollAvailability
ExtentsLeftETF Y con 1–3 2–2 3–3 set by coll stoplight none
warn alarm
Reports how long until no more extents can be added to a estimated 1–7 estimated 24
non-excluded object in a non-excluded user schema in a days until hours or less
non-excluded tablespace that is running out of extents. failure until failure
The annotation shows the day and time to failure or the
reason data calculation cannot be done.

Collector: CollETF
Table 27 PATROL for Oracle 8.5.10 (Part 5 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ExtentsLeftPct Y con undef 0–5 5–10 set by coll graph percentage of extents
alarm warn
Graphs the percentage of extents that are left in a non-
excluded object in a non-excluded user schema in a non-
excluded tablespace. Tablespace, user and object
exclusion are used in the calculations, and does not
consider rollback segments.

Collector: CollAvailability
FreeSpace Y con undef 0–5 5–10 set by coll graph percentage of space
alarm warn
Shows the percentage of space available in the non-
excluded tablespace with the least amount of free space.
When this parameter goes into alarm, the Free Space
report for the tablespaces appears as the annotation.

This parameter considers tablespace exclusion in its

calculations for warnings and alarms. If a tablespace is
autoextensible, FreeSpace will never alarm for that
tablespace. If all monitored tablespaces are
autoextensible. CannotExtend monitors autoextended
tablespaces and their segments.

Collector: CollAvailability
FreeSpaceDeficit Y con undef 0–1 1–1 set by coll bool none
warn alarm
Indicates whether there is at least one segment that (inactive by
cannot allocate its next extent because of insufficient default)
space. When this parameter alarms, the annotation
reports all segments with insufficient available space.

This parameter is affected by tablespace, object, or user

exclusions.

Collector: CollAvailability

PATROL Parameter Reference Manual 961

PATROL Parameter Reference Manual 962

Table 27 PATROL for Oracle 8.5.10 (Part 6 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
FreeSpaceETF Y con 1-3 2–2 3–3 set by coll stoplight none
warn alarm
Shows how long until there is no free space left in the estimated 1–7 estimated 24
non-excluded tablespaces.The annotation shows the day days until hours or less
and time to failure or the reason data calculation cannot failure until failure
be done.

Collector: CollETF
InstanceStatus Y con undef 1–1 2–2 set by coll stoplight none
warn alarm
Reports the status of the instance on the Oracle server.
Instances in blackout mode or that have been shutdown
from within PATROL are ignored to prevent false alarms.

Collector: CollAvailability
LockConflicts Y con 0–10 None 1–10 set by coll gauge number of lock
alarm alarm conflicts
The LockConflicts parameter provides all lock details for
transation, DML, and PL/SQL locks.

If lock contention has been occuring for more than 2

minutes, the LockConflicts parameter goes into alarm.
The value is the number of lock conflicts observed. When
the parameter goes into alarm, the annotation is the Lock
Conflict report.

Collector: CollAvailability
RSExtentsLeft Y con undef 0–5 5–10 set by coll graph number of available
alarm warn extents
Reports the number of additional extents that are
available to any rollback segment on the instance.

Tablespace, user and object exclusion are used in the

calculations.

Collector: CollAvailability
Table 27 PATROL for Oracle 8.5.10 (Part 7 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
RSExtentsLeftPct Y con undef 0–5 5–10 set by coll graph percentage of
alarm warn additional extents
Reports the minimum space left (in MB) in non-excluded
tablespaces which contain rollback segments. If all the
non-excluded tablespaces with rollback segments are
autoextensible (other than the SYSTEM tablespace), this
parameter is deactivated.

Tablespace, user and object exclusion are used in the

calculations.

Collector: CollAvailability
RSSpaceLeft Y con undef 0–5 5–10 set by coll gauge number of MB left
alarm warn
Reports the minimum space left (in MB) in non-excluded (inactive by (inactive by
tablespaces which contain rollback segments. If all the default) default)
non-excluded tablespaces with rollback segments are
autoextensible (other than the SYSTEM tablespace), this
parameter is deactivated.

Tablespace, user and object exclusion are used in the

calculations.

Collector: CollAvailability
RSSpaceLeftPct Y con undef undef undef set by coll gauge percentage of space
left
Reportsthe percentage of space left in non-excluded table
spaces with the least amount of space left that contain
rollback segments.

Tablespace, user and object exclusion are used in the

calculations.

Collector: CollAvailability

PATROL Parameter Reference Manual 963

PATROL Parameter Reference Manual 964

Table 27 PATROL for Oracle 8.5.10 (Part 8 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
SchedulerOutput Y con undef undef undef set by coll graph none

Reports the results of any jobs from the Scheduler that

were specified to be sent to an annotation. If a report was
sent to an annotation, the annotated data point will
appear at the time the job or report was supposed to run.

Collector: CollAvailability
ShutdownInProgress Y con undef 5–10 10–100 set by coll stoplight none
warn alarm
Reports if the database is in the process of shutting down.

Collector: CollAvailability
SystemTSLeft Y con undef 0–5 5–10 set by coll graph MB
alarm warn
Reports the megabytes left in the SYSTEM tablespace.

Collector: CollAvailability
SystemTSLeftETF Y con 1–3 2–2 3–3 set by coll stoplight none
warn alarm
Shows how long until there is no more space left in the estimated 1–7 estimated 24
SYSTEM tablespace. The annotation shows the day and days until hours or less
time to failure or the reason data calculation cannot be failure until failure
done.

Collector: CollETF
SystemTSLeftPct Y con undef 0–5 5–10 set by coll graph percentage of space
alarm warn left
Displays the percentage of space left in the SYSTEM
tablespace. If the SYSTEM tablespace is autoextensible,
this parameter is deactivated.

Collector: CollAvailability
Table 27 PATROL for Oracle 8.5.10 (Part 9 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TempTSLeft Y con undef 0–5 5–10 set by coll graph number of megabytes
alarm warn left
Displays the space left in the temporary tablespaces (both
DMTS and LMTS). The calculations include both
extensible and non-extensible datafiles and temp files.

TempTSLeft will go into warning when the space left in

the TEMPORARY tablespace has has less then 10MB left,
and will go into alarm when there is less than 5MB left.

Collector: CollTempTS
TempTSLeftPct Y con undef 0–5 5–10 set by coll graph percentage of space
alarm warn left
Displays the percentage of space left in the temporary
tablespaces (both DMTS and LMTS). The calculations
include both extensible and non-extensible datafiles and
temp files.

TempTSLeftPct will go into warning when the percentage

of space left in the TEMPORARY tablespace has reached
10%, and will go into alarm when the percentage of space
left reaches 5%.

Collector: CollTempTS
CAPACITY Application Class
AlertLogSize Y con undef undef undef set by coll graph MB

Reports the size of the alert log on the instance.

Collector: CollCapacity

PATROL Parameter Reference Manual 965

PATROL Parameter Reference Manual 966

Table 27 PATROL for Oracle 8.5.10 (Part 10 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BGDumpLeft Y con undef 0–5 5–10 set by coll graph MB
alarm warn
Reports the space in megabytes that is left in the file
system, device, or mount point that contains the
background dump directory for the Oracle instance.

This parameter is not active for a remote instance and is

not online if operating system components are not
running.

Collector: CollCapacity
BGDumpLeftETF Y con 1–3 2–2 3–3 set by coll stoplight none
warn alarm
Reports how long until there is no space left in the estimated 1–7 estimated 24
background dump directory for the monitored Oracle days until hours or less
server. The annotation shows the day and time to failure failure until failure
or the reason data calculation cannot be done.

This parameter is not active for a remote instance and is

not online if operating system components are not
running.

Collector: CollETF
BGDumpUsed Y con undef undef undef set by coll graph MB

Reports the space used in megabytes by trace files in the

background dump directory for the Oracle server. This
parameter is not active for a remote instance and is not
online if operating system components are not running.

Collector: CollCapacity
Table 27 PATROL for Oracle 8.5.10 (Part 11 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BGDumpUsedPct Y con undef 95–100 90–95 set by coll graph percentage of space
alarm warn
Reports the percentage of space used by trace files in the
background dump directory for the monitored Oracle
Server. This parameter is not active for a remote instance
and is not online if operating system components are not
running.

Collector: CollCapacity
CoreDumpLeft Y con undef 0–5 5–10 set by coll graph MB
alarm warn
Reports the space in megabytes that is left in the file
system, device, or mount point that contains the core
directory for the Oracle instance. This parameter is not
active for a remote instance and is not online if operating
system components are not running.

Collector: CollCapacity
CoreDumpLeftETF Y con 1–3 2–2 3–3 set by coll stoplight none
warn alarm
Reports how long until there is no more space available in estimated 1–7 estimated 24
the core dump directory for the monitored Oracle Server. days until hours or less
The annotation shows the day and time to failure or the failure until failure
reason data calculation cannot be done.

This parameter is not active for a remote instance and is

not online if operating system components are not
running.

Collector: CollETF

PATROL Parameter Reference Manual 967

PATROL Parameter Reference Manual 968

Table 27 PATROL for Oracle 8.5.10 (Part 12 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CoreDumpUsed Y con undef undef undef set by coll graph MB

Reports the space in megabytes used in the core dump

directory for the Oracle server.

This parameter is not active for a remote instance and is

not online if operating system components are not
running.

Collector: CollCapacity
CoreDumpUsedPct Y con undef 95–100 90–95 set by coll graph percentage of space
warn alarm
Reports the percentage of space used in the core dump
directory for the monitored Oracle Server.

This parameter is not active for a remote instance and is

not online if operating system components are not
running.

Collector: CollCapacity
CursorsUsed Y con undef undef undef set by coll gauge percentage of used
cursors
Reports the percentage of open cursors used by any
current user.

Collector: CollCapacity
LicenseLimit Y con undef 99–100 undef set by coll gauge percentage of
alarm sessions
Graphs how many concurrent sessions as set by the
LICENSE_MAX_SESSIONS parameter can connect to an
instance.

Collector: CollCapacity
Table 27 PATROL for Oracle 8.5.10 (Part 13 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LocksFree Y con undef 0–10 10–20 set by coll graph number of locks
alarm warn
Reports the number of free enqueue resources. If the
parameter alarms, there are not enough enqueue
resources left. The annotation reports the total number of
locks by user in descending order.

Collector: CollCapacity
LocksUsed Y con undef undef undef set by coll gauge percentage of locks
used
Reports the percentage of used enqueue resources.

Collector: CollCapacity
ProcsLeft Y con undef 0–5 5–10 set by coll graph number of processes
alarm warn
Reports the number of additional processes that the
instance can support. If this parameter alarms, the
instance cannot support many more additional processes.
The annotation reports the total number of processes by
user in descending order.

Collector: CollCapacity
ProcsLeftETF Y con 1–3 2–2 3–3 set by coll stoplight none
warn alarm
Shows how long until the instance can support no more estimated 1–7 estimated 24
processes. The annotation shows the day and time to days until hours or less
failure or the reason data calculation cannot be done. failure until failure

Collector: CollETF

PATROL Parameter Reference Manual 969

PATROL Parameter Reference Manual 970

Table 27 PATROL for Oracle 8.5.10 (Part 14 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ProcsUsed Y con undef undef undef set by coll gauge percentage of
processes
Reports the ratio of current Oracle processes to the total
number of processes allowed for the Oracle server. If the
ratio is too high, there are not enough processes left on
the Oracle server.

Collector: CollCapacity
SessionsLeft Y con undef 0–5 5–10 set by coll graph number of sessions
alarm warn
Reports how many additional user sessions can be
allowed by the instance using the current configuration
for the instance. The annotation reports the total number
of sessions by user in descending order.

Collector: CollCapacity
SessionsLeftETF Y con 1–3 2–2 3–3 set by coll stoplight none
warn alarm
Shows how many additional user sessions will be estimated 1–7 estimated 24
allowed by the instance in its current configuration. The days until hours or less
annotation shows the day and time to failure or the failure until failure
reason data calculation cannot be done.

Collector: CollETF
SessionsUsed Y con undef undef undef set by coll gauge percentage of
sessions
Shows the percentage of current sessions as measured
against the session limit set by the init.ora SESSIONS
parameter.

Collector: CollCapacity
Table 27 PATROL for Oracle 8.5.10 (Part 15 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
TransLeft Y con undef 0–5 5–10 set by coll gauge number of
alarm warn transactions
Reports the number of transactions that are available to
be started against the Oracle instance. The annotation
reports the total number of transactions by user in
descending order.

Collector: CollCapacity
TransUsed Y con undef undef undef set by coll graph percentage of
transactions
Reports the percentage of total allowed transactions that
have been used for the Oracle instance.

Collector: CollCapacity
UserDumpLeft Y con undef 0–5 5–10 set by coll graph MB
alarm warn
Reports the space in megabytes that is left in the file
system, device, or mount point that contains the user
dump directory for the Oracle instance. The annotation
reports the destination of the user dump directory, the
space used, and the free space left in the directory. This
parameter is not active for a remote instance and is not
online if operating system components are not running.

Collector: CollCapacity

PATROL Parameter Reference Manual 971

PATROL Parameter Reference Manual 972

Table 27 PATROL for Oracle 8.5.10 (Part 16 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
UserDumpLeftETF Y con 1–3 2–2 3–3 set by coll stoplight none
warn alarm
Reports how long until there are no megabytes left in the estimated 1–7 estimated 24
file system, device or mount point containing the user days until hours or less
dump directory for the monitored Oracle Server. The failure until failure
annotation shows the day and time to failure or the
reason data calculation cannot be done.

This parameter is not active for a remote instance and is

not online if operating system components are not
running.

Collector: CollETF
UserDumpUsed Y con undef undef undef set by coll graph MB

Reports the space in megabytes that has been used in the

used dump directory for the Oracle server. This
parameter is not active for a remote instance and is not
online if operating system components are not running.

Collector: CollCapacity
UserDumpUsedPct Y con undef 95–100 90–95 set by coll graph percentage of space
alarm warn
Reports the percentage of space used in the user dump
directory for the monitored Oracle Server. This parameter
is not active for a remote instance and is not online if
operating system components are not running.

Collector: CollCapacity
Table 27 PATROL for Oracle 8.5.10 (Part 17 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
COLLECTORS Application Class
CollAvailability Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the AVAILABLITY application. The
annotation reports the nature of any problem with the
collection process, and an event is raised.

Collector: CollAvailability
CollCapacity Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the CAPACITY application. The
annotation reports the nature of any problem with the
collection process, and an event is raised.

Collector: CollCapacity
CollDbLinks Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the DB_LINKS application.

Collector: CollDbLinks
CollETF Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
estimated time to failure parameters in the
AVAILABILITY application. The annotation reports the
nature of any problem with the collection process, and an
event is raised.

Collector: CollETF

PATROL Parameter Reference Manual 973

PATROL Parameter Reference Manual 974

Table 27 PATROL for Oracle 8.5.10 (Part 18 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CollEnvironment Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the ENVIRONMENT application. The
annotation reports the nature of any problem with the
collection process, and an event is raised.

Collector: CollEnvironment
CollJobs Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the JOBS application. The annotation
reports the nature of any problem with the collection
process, and an event is raised.

Collector: CollJobs
CollLog Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the LOG application. The annotation
reports the nature of any problem with the collection
process, and an event is raised.

Collector: CollLog
CollMTS Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the MTS and MTS_DISP application. The
annotation reports the nature of any problem with the
collection process, and an event is raised.

Collector: CollMTS
Table 27 PATROL for Oracle 8.5.10 (Part 19 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CollNetwork Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the NETWORK application. The
annotation reports the nature of any problem with the
collection process, and an event is raised.

Collector: CollNetwork
CollPQO Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the PQO application. The annotation
reports the nature of any problem with the collection
process, and an event is raised.

Collector: CollPQO
CollPerformance Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the PERFORMANCE application. The
annotation reports the nature of any problem with the
collection process, and an event is raised.

Collector: CollPerformance
CollReplication Y con undef undef undef 1800 sec bool none

Reports any problems with the collection process for the

parameters in the REPLICATION application. The
annotation reports the nature of any problem with the
collection process, and an event is raised.

Collector: CollReplication

PATROL Parameter Reference Manual 975

PATROL Parameter Reference Manual 976

Table 27 PATROL for Oracle 8.5.10 (Part 20 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CollResponse Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
response parameters in the PERFORMANCE application.
The annotation reports the nature of any problem with
the collection process, and an event is raised.

Collector: CollResponse
CollSGA Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the SGA application. The annotation
reports the nature of any problem with the collection
process and an event is raised.

Collector: CollSGA
CollSqlViewer Y con undef 1–1 undef 1800 sec bool none
alarm
Displays the status of the SQLViewer application and the
status of the CollSqlViewer parameter collection. The
annotation reports the nature of any problem with the
collection process and an event is raised.

Collector: CollSqlViewer
CollTablespaces Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the TABLESPACES application. The
annotation reports the nature of any problem with the
collection process and an event is raised.

Collector: CollTablespaces
Table 27 PATROL for Oracle 8.5.10 (Part 21 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CollTempTS Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
temporary tablespace parameters in the AVAILABILITY
application. The annotation reports the nature of any
problem with the collection process and an event is
raised.

Collector: CollTempTS
CollUsers Y con undef 1–1 undef 1800 sec bool none
alarm
Reports any problems with the collection process for the
parameters in the USERS application. The annotation
reports the nature of any problem with the collection
process and an event is raised.

Collector: CollUsers
DB_LINKS_INSTANCE Application Class
PingTime Y con undef 120–300 300–600 set by coll graph sec
warn alarm
Displays the seconds it takes to ping the database on the
other end of the database link.

Collector: CollDbLinks
ENVIRONMENT Application Class
BlkChgRatio Y con 0–100 40–50 50–100 set by coll graph percentage of block
alarm warn alarm gets that are database
Reports the percentage of database block gets that are block changes
database block changes. The annotation reports the delta
values used in the calculation.

Collector: CollEnvironment

PATROL Parameter Reference Manual 977

PATROL Parameter Reference Manual 978

Table 27 PATROL for Oracle 8.5.10 (Part 22 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BlkChgTrans Y con undef undef undef set by coll graph number of block
changes
Reports the average number of block changes per
transaction for all the transactions on the instance.

Collector: CollEnvironment
BlkGetsTrans Y con undef undef undef set by coll graph number of block
visits
Reports the average number of block visits per
transaction for all the transactions on the instance.

Collector: CollEnvironment
BlkUpdRatio Y con undef undef undef set by coll graph percentage of block
gets that are block
Reports the percentage of consistent gets and database changes
block gets that are block changes.

Collector: CollEnvironment
CallsPerTrans Y con undef undef undef set by coll graph number of calls

Reports the average number of use calls per transaction in

the polling interval.

Collector: CollEnvironment
LongScanRatio Y con undef undef undef set by coll graph percentage of table
scans
Reports the percentage of table scans that are full long
table scans.

Collector: CollEnvironment
ParseCallRatio Y con undef undef undef set by coll graph percentage of calls

Reports the percentage of user calls that are parse calls.

Collector: CollEnvironment
Table 27 PATROL for Oracle 8.5.10 (Part 23 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
RecsvCallsRatio Y con undef undef undef set by coll graph percentage of calls

Reports the percentage of all calls that are recursive calls.

Collector: CollEnvironment
RowSourceRatio Y con undef undef undef set by coll graph percentage of rows

Reports the percentage of rows encountered during index

lookup and full table scans that are rows encountered in
full table scans.

Collector: CollEnvironment
JOBS Application Class
BrokenJobs Y con undef 0–0 1–100 set by coll gauge none
alarm
Shows any job flagged as broken. A job is labelled as
either broken or not broken. Oracle does not attempt to
run broken jobs.

Collector: CollJobs
FailedJobs Y con undef 0–0 1–100 set by coll gauge none
alarm
Shows any job considered a failure. A job is marked as a
failed job if Oracle has failed to successfully execute the
job. If a job fails 16 times, it is considered a broken job.

Collector: CollJobs
OverdueJobs Y con undef 0–0 1–100 set by coll gauge none
alarm
Displays the number of jobs that are more than 2 minutes
late. These jobs may be delayed, broken, or failed.

Collector: CollJobs

PATROL Parameter Reference Manual 979

PATROL Parameter Reference Manual 980

Table 27 PATROL for Oracle 8.5.10 (Part 24 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LISTENER Application Class
ListenerLog Y std undef 2–4 4–6 600 sec stoplight none
warn alarm
Alarms when an error has been recorded to the
listener.log file.
ListenerLogSize Y std undef undef undef 600 sec graph KB

Reports the size of the listener.log file.

ListenerStatus Y std undef 0–0 1–1 600 sec bool none
alarm
Reports the status of the SQL*Net or Net8 Listener.
ListenerTraceSize Y std undef undef undef 600 sec graph KB

Reports the size of the listener trace files.

LOG Application Class
ArchLogCreated Y con undef undef undef set by coll graph number of archive
logs
Alarms when a new archive log has been created, and
calculates the number of archive logs created since the
last polling cycle. The annotation for this parameter
reports the thread number, sequence number, and the full
pathname of the log file.

Collector: CollLog
RedoAllocationLatch Y con undef 1–2 2–100 set by coll graph percentage of
warn alarm accesses
Reports the percentage of accesses on the redo allocation
latch that are misses. The annotation reports the delta
values used in the calculation.

Collector: CollLog
Table 27 PATROL for Oracle 8.5.10 (Part 25 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
RedoArchDelay Y con 0-120 30–60 61–120 set by coll gauge min
alarm warn alarm
Reports the number of minutes from the last time that the (inactive by
redo log was switched. The annotation for this parameter default)
lists the unarchived redo log and the date and time for the
first entry for the redo log.

This parameter reports no data if redo log archiving is not

enabled.

Collector: CollLog
RedoCopyLatch Y con undef 1–2 2–100 set by coll graph percentage of
warn alarm requests
Reports the percentage of requests on the redo copy latch
that have timed out. The annotation reports the delta
values used in the calculation.

Collector: CollLog
RedoEntrySize Y con undef undef undef set by coll graph size of redo log
entries
Reports the current average size of the redo log entries.

Collector: CollLog
RedoNotArch Y con 0–20 2–3 3–20 set by coll stoplight number of files
alarm warn alarm
Reports the number of redo log files that have been
written but not yet archived, excluding the current online
redo log file. When this parameter alarms, the archiving
process may be falling behind. This parameter can only
be instantiated when the monitored instance is running in
ARCHIVELOG mode.

The annotation reports the unarchived log files with the

date and time of the first time they were written.

Collector: CollLog

PATROL Parameter Reference Manual 981

PATROL Parameter Reference Manual 982

Table 27 PATROL for Oracle 8.5.10 (Part 26 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
RedoRate Y con undef undef undef set by coll graph KB per sec

Reports the rate (KB per second) that data is added to the
redo logs.

Collector: CollLog
RedoSmallCopyRatio Y con undef undef undef set by coll graph percentage of redo
entries
Reports the percentage of redo entries that are redo small
copies. On a single-processor system, this parameter
always has the value 100 because all redo entries are
copied on the redo allocation latch.

Collector: CollLog
RedoWaitRatio Y con undef 1–2 2–100 set by coll graph percentage of redo
warn alarm entries
Reports the percentage of redo log entries that are redo
log space requests during the last interval. The annotation
reports the delta values used in the calculation.

Collector: CollLog
MTS Application Class
MTSProcsIdle Y con undef undef undef set by coll graph number of shared
servers
Reports the number of shared servers that are currently
instantiated but are idle.

Collector: CollMTS
MTSProcsLeft Y con undef undef undef set by coll graph number of shared
servers
Reports the number of shared servers that are currently
available because they are either idle or have not been
created yet.

Collector: CollMTS
Table 27 PATROL for Oracle 8.5.10 (Part 27 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
MTSProcsUsed Y con undef undef undef set by coll graph number of shared
servers processes
Reports the number of shared server processes that are
currently being used.

Collector: CollMTS
MaxBusyRate Y con undef 50–75 75–100 set by coll graph sec
warn alarm
Reports the busy rate for the dispatcher.

Collector: CollMTS
MaxWaitTimes Y con 0–100 10–25 25–100 set by coll graph sec
alarm warn alarm
Reports the average dispatcher waiting time.

Collector: CollMTS
MTS_DISP Application Class
BusyRate Y con undef 50–75 75–100 set by coll graph percentage of
warn alarm seconds
Reports the percentage of time that each dispatcher
process is busy. The annotation displays the name of the
dispatcher process, the status of the process, the message
size in bytes, and the number of breaks for each process.

Collector: CollMTS

PATROL Parameter Reference Manual 983

PATROL Parameter Reference Manual 984

Table 27 PATROL for Oracle 8.5.10 (Part 28 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
QueueLength Y con 0–50 5–10 10–50 set by coll graph length of queue
alarm warn alarm
Reports the current length of the dispatcher queue.

Collector: CollMTS
QueueWaitTime Y con 0–100 50–75 75–100 set by coll graph sec
alarm warn alarm
Reports the average waiting time for the queue over the
last interval. The annotation displays the dispatcher
process, the queue for the process, and the waiting time
for the process.

Collector: CollMTS
NETWORK Application Class
ClientBytesIn Y con undef undef undef set by coll graph number of bytes

Reports the number of bytes per second that were

received via SQL*Net from the client during the last
interval.

Collector: CollNetwork
ClientBytesOut Y con undef undef undef set by coll graph number of bytes

Reports the number of bytes per second that were sent via
SQL*Net to the client during the last interval.

Collector: CollNetwork
ClientInLth Y con undef undef undef set by coll graph number of bytes

Reports the average length in bytes of the messages

received from clients during the last interval.

Collector: CollNetwork
Table 27 PATROL for Oracle 8.5.10 (Part 29 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ClientMsgs Y con undef undef undef set by coll gauge number of message
round trips
Reports the number of message round trips per second
from the clients in the last interval.

Collector: CollNetwork
ClientOutLth Y con undef undef undef set by coll graph number of bytes

Reports the average length in bytes of the messages sent

to clients during the last interval.

Collector: CollNetwork
DBLinkBytesIn Y con undef undef undef set by coll graph number of bytes

Reports the number of bytes received per second via

SQL*Net from a dblink in the last interval.

Collector: CollNetwork
DBLinkBytesOut Y con undef undef undef set by coll graph number of bytes

Reports the number of bytes per second that were sent via
SQL*Net to the dblink during the last interval.

Collector: CollNetwork

PATROL Parameter Reference Manual 985

PATROL Parameter Reference Manual 986

Table 27 PATROL for Oracle 8.5.10 (Part 30 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DBLinkInLth Y con undef undef undef set by coll graph number of bytes

Reports the average length in bytes of the messages

received from dblinks during the last interval.

Collector: CollNetwork
DBLinkMsgs Y con undef undef undef set by coll graph number of message
round trips
Reports the number of message round trips per second
from the dblinks in the last interval.

Collector: CollNetwork
DBLinkOutLth Y con undef undef undef set by coll graph number of bytes

Reports the average length in bytes of the messages sent

to dblinks during the last interval.

Collector: CollNetwork
ORACLE Application Class
CollAvailability Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the

AVAILABLITY application. The parameter
CollAvailability in the COLLECTORS application
displays any problems with the collection process.

Note: If you are running an application such as SAP or

Oracle Applications, change the poll time of this collector
to reduce CPU usage on your system.
CollCapacity Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the

CAPACITY application. The parameter CollCapacity in
the COLLECTORS application displays any problems
with the collection process.
Table 27 PATROL for Oracle 8.5.10 (Part 31 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CollDbLinks Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the

DB_LINKS application. The parameter CollDbLinks in
the COLLECTORS application displays any problems
with the collection process.
CollETF Y std NA NA NA 1800 sec bool NA

Collects the information for the estimated time to failure

parameters in the AVAILABILITY application. The
parameter CollETF in the COLLECTORS application
displays any problems with the collection process.
CollEnvironment Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the

ENVIRONMENT application. The parameter
CollEnvironment in the COLLECTORS application
displays any problems with the collection process.
CollJobs Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the JOBS

application. The parameter CollJobs in the COLLECTORS
application displays any problems with the collection
process.
CollLog Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the LOG

application. The parameter CollLog in the COLLECTORS
application displays any problems with the collection
process.

PATROL Parameter Reference Manual 987

PATROL Parameter Reference Manual 988

Table 27 PATROL for Oracle 8.5.10 (Part 32 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CollMTS Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the MTS

and MTS_DISP application. The parameter CollMTS in
the COLLECTORS application displays any problems
with the collection process.
CollNetwork Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the

NETWORK application. The parameter CollNetwork in
the COLLECTORS application displays any problems
with the collection process.
CollPQO Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the PQO

application. The parameter CollPQO in the
COLLECTORS application displays any problems with
the collection process.
CollPerformance Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the

PERFORMANCE application. The parameter
CollPerformance in the COLLECTORS application
displays any problems with the collection process.
CollReplication Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the

REPLICATION application. The parameter
CollReplication in the COLLECTORS application
displays any problems with the collection process.
Table 27 PATROL for Oracle 8.5.10 (Part 33 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CollResponse Y std NA NA NA 1800 sec bool NA

Collects the information for the response parameters in

the PERFORMANCE application. The parameter
CollResponse in the COLLECTORS application displays
any problems with the collection process.
CollSGA Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the SGA

application. The parameter CollSGA in the
COLLECTORS application displays any problems with
the collection process.
CollSqlViewer Y std NA NA NA 1800 sec bool NA

Displays the status and sets the polling time for the
SQLVIEWER application. The parameter CollSqlViewer
in the COLLECTORS application displays any problems
with the collection process.
CollTablespaces Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the

TABLESPACES application. The parameter
CollTablespaces in the COLLECTORS application
displays any problems with the collection process.
CollTempTS Y std NA NA NA 1800 sec none NA

Collects the information for the temporary tablespaces

parameters in the AVAILABILITY application. The
parameter CollTempTS in the COLLECTORS application
displays any problems with the collection process.

PATROL Parameter Reference Manual 989

PATROL Parameter Reference Manual 990

Table 27 PATROL for Oracle 8.5.10 (Part 34 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
CollUsers Y std NA NA NA 1800 sec bool NA

Collects the information for the parameters in the USERS

application. The parameter CollUsers in the
COLLECTORS application displays any problems with
the collection process.
InstanceCheck Y coll undef undef undef 120 sec NA NA

Checks for any hanging of the database in discovery or

the InstanceStatus parameter. If the duration of a
PATROL Agent variable timestamp is larger than three
minutes, InstanceCheck assumes that the database is
hung, and closes the channel.

This prevents a hung database and/or a hung channel.

InstanceStatus Y coll undef undef undef 1 min NA NA

Collects the information for the InstanceStatus parameter

in the AVAILABILITY application, and the OracleStatus
parameter in the ORACLE application.
OracleStatus Y con undef 1–1 2–2 set by coll stoplight NA
warn alarm
Shows the current status of the instances on the Oracle
Server. If an instance is in blackout mode or has been
shutdown from within PATROL, the parameter is OK. If
an instance is down and is 24/7, the parameter is in
alarm. If the instance is down and is not 24/7, the
parameter is in warn.

Collector: InstanceStatus
Table 27 PATROL for Oracle 8.5.10 (Part 35 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PERFORMANCE Application Class
BGChkpntRate Y con undef 3–50 undef set by coll graph number of
warn checkpoints
Reports the number of checkpoints per hour over the last
interval.

Collector: CollPerformance
BlkChgRate Y con undef undef undef set by coll graph number of block
changes
Reports the number of block changes per second in the
last interval.

Collector: CollPerformance
BlkGetRate Y con undef undef undef set by coll graph number of block gets

Reports the number of block gets per second.

Collector: CollPerformance
CallRate Y con undef undef undef set by coll graph number of calls

Reports the number of calls per second made to the

database engine.

Collector: CollPerformance

PATROL Parameter Reference Manual 991

PATROL Parameter Reference Manual 992

Table 27 PATROL for Oracle 8.5.10 (Part 36 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ChkpntRate Y con 1–100 1–20 20–100 set by coll graph min
alarm warn alarm
Reports the average number of minutes between
checkpoints.The annotation displays the number of
checkpoints and their time period.

Collector: CollPerformance
ConsChgRatio Y con undef 5–100 0–0 set by coll graph percentage of
alarm consistent gets
Reports the percentage of consistent gets that are
consistent changes. The annotation reports the delta
values used in the calculation.

Collector: CollPerformance
CurrentTrans Y con undef undef undef set by coll graph number of locks

Reports the number of transaction enqueue locks that are

held in exclusive mode.

Collector: CollPerformance
DBWRAvgBuffScanned Y con undef undef undef set by coll graph number of buffers

Graphs the average number of buffers that were looked at

when scanning each LRU set for dirty buffers to clean.

Collector: CollPerformance
Table 27 PATROL for Oracle 8.5.10 (Part 37 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DBWRAvgScanDepth Y con undef undef undef set by coll graph number of buffers

Graphs the average scan depth (number of buffers

examined by DBWR) that is added to this statistic every
time DBWR scans the LRU for dirty buffers.

Collector: CollPerformance
DBWRBuffScanned Y con undef undef undef set by coll graph number of buffers

Displays the total number of buffers looked at when

scanning each LRU set for dirty buffers to clean. This
count includes both dirty and clean buffers.

Collector: CollPerformance
DBWRCheckpoints Y con undef undef undef set by coll graph number of scans

Graphs the number of times the DBWR was asked to scan

the cache and write all blocks marked for a checkpoint.

Collector: CollPerformance
DBWRCrossInstWrites Y con undef undef undef set by coll graph number of blocks

Graphs the total number of blocks written for other

instances so that they can access the buffers.

Collector: CollPerformance
DBWRFreeBuffFound Y con undef undef undef set by coll graph number of buffers

Graphs the number of buffers that DBWR found to be

clean when it was requested to make free buffers.

Collector: CollPerformance

PATROL Parameter Reference Manual 993

PATROL Parameter Reference Manual 994

Table 27 PATROL for Oracle 8.5.10 (Part 38 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DBWRLRUScans Y con undef undef undef set by coll graph number of times

Graphs the number of times that DBWR does a scan of

the LRU queue looking for buffers to write.

Collector: CollPerformance
DBWRMakeFreeRequests Y con undef undef undef set by coll graph number of messages

Graphs the number of messages received requesting

DBWR to make some more free buffers for the LRU.

Collector: CollPerformance
DBWRReusableBuff Y con undef undef undef set by coll graph number of buffers

Graphs the number of buffers that DBWR found to be

clean when it was requested to make free buffers.

Collector: CollPerformance
DBWRSummedScanDepth Y con undef undef undef set by coll graph number of buffers

Graphs the number of buffers examined by the DBWR to

the current time. The current scan depth (number of
buffers examined by DBWR) is added to this statistic
every time DBWR scans the LRU for dirty buffers.

Collector: CollPerformance
DBWRTimeouts Y con undef undef undef set by coll graph number of idle times

Graphs the number of times that the DBWR has been idle
since the last time-out. These are the times that the DBWR
looked for buffers to idle write.

Collector: CollPerformance
Table 27 PATROL for Oracle 8.5.10 (Part 39 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DMLLocks Y con undef 99–100 undef set by coll graph percentage of locks

Reports the total percentage of DML locks in the instance.

Collector: CollPerformance
DiskSortRate Y con undef 3–100 undef set by coll graph number of sorts
alarm
Reports the average number of disk sorts per second. The
annotation reports the delta values used in the
calculation.

Collector: CollPerformance
DiskSorts Y con undef 10–20 20–100 set by coll graph percentage of sorts
warn alarm
Reports the percentage of all sorts that were not
performed in memory during the last interval. The
annotation reports the delta values used in the
calculation.

Collector: CollPerformance
EnqConversions Y con undef undef undef set by coll graph number of converts

Graphs the number of enqueue converts.

Collector: CollPerformance
EnqDeadlocks Y con undef undef undef set by coll graph number of deadlocks

Graphs the total number of enqueue deadlocks between

different sessions.

Collector: CollPerformance

PATROL Parameter Reference Manual 995

PATROL Parameter Reference Manual 996

Table 27 PATROL for Oracle 8.5.10 (Part 40 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
EnqReleases Y con undef undef undef set by coll graph number of releases

Graphs the total number of enqueue releases.

Collector: CollPerformance
EnqRequests Y con undef undef undef set by coll graph number of gets

Graphs the total number of enqueue gets.

Collector: CollPerformance
EnqTimeouts Y con undef undef undef set by coll graph number of locks

Shows the number of times an enqueue lock was

requested but was not granted immediately during the
last hourly reporting interval.

Collector: CollPerformance
EnqWaits Y con undef undef undef set by coll graph number of waits

Graphs the total number of waits that occurred during an

enqueue convert or enqueue get because the enqueue
could not be granted immediately.

Collector: CollPerformance
ExecRate Y con undef undef undef set by coll graph executions per sec

Reports the statement execution rate per second for the

Oracle server.

Collector: CollPerformance
Table 27 PATROL for Oracle 8.5.10 (Part 41 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LockAvgWait Y con 0–120 2–5 5–120 set by coll graph number of seconds
alarm warn alarm
Reports the average wait time in seconds for a lock to be
acquired. The annotation displays the Lock Conflict
Report.

Collector: CollPerformance
LockWaitRatio Y con undef 10–20 20–100 set by coll graph percentage of lock
warn alarm requests
Reports the percentage of lock requests that had to wait
for a lock to be acquired. The annotation reports the delta
values used in the calculation.

Collector: CollPerformance
RSEntWaits Y con 0–100 2–5 5–100 set by coll graph number of waits
alarm warn alarm
Reports the number of rollback segment entry waits per
second in the last interval.

Collector: : CollPerformance
RSHdrWaits Y con 0–100 2–5 5–100 set by coll graph percentage of gets
alarm warn alarm
Reports the percentage of gets that are rollback segment
header waits.

Collector: CollResponse
ResponseExecTime Y con undef undef undef set by coll graph sec

Reports the time it takes to execute the SQL file from the
PATROL installation directory.

Collector: CollPerformance

PATROL Parameter Reference Manual 997

PATROL Parameter Reference Manual 998

Table 27 PATROL for Oracle 8.5.10 (Part 42 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
ResponseSqlTime Y con undef undef undef set by coll graph sec

Reports the execution time of SQL statements that have

been issued against the Oracle server.

Collector: CollPerformance
RowsPerSort Y con undef undef undef set by coll graph number of rows

Reports the average number of rows per sort for all sorts
in the reporting period.

Collector: CollResponse
TransRate Y con undef undef undef set by coll graph number of
transactions
Reports the number of transactions per hour for the last
interval.

Collector: CollPerformance
UserCallRate Y con undef undef undef set by coll graph number of user calls

Reports the number of user calls per second.

Collector: CollPerformance
UserRBRatio Y con undef undef undef set by coll graph percentage of
transactions
Reports the percentage of all transactions that have been
rolled back in the last interval.

Collector: CollPerformance
Table 27 PATROL for Oracle 8.5.10 (Part 43 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
PQO Application Class
QueriesInitiated Y con undef undef undef set by coll graph parallel queries per
hr
Reports the number of parallel queries initiated per hour
in the last interval.

Collector: CollPQO
SlavesCPUUsed Y con undef undef undef set by coll graph percentage of CPU
time
Reports the total percentage of CPU time that was used
by parallel query slaves in the last interval.

Collector: CollPQO
SlavesLeft Y con undef undef undef set by coll graph number of parallel
slaves
Reports the number of parallel query slaves currently
available for assigning to statement processing.

Collector: CollPQO
SlavesPctBusy Y con undef undef undef set by coll graph percentage of busy
parallel query slaves
Reports the current percentage of busy parallel query
slaves.

Collector: CollPQO
SlavesUsed Y con undef undef undef set by coll graph number of slaves

Reports the total number of slaves that are currently

working in a parallel query environment.

Collector: CollPQO

PATROL Parameter Reference Manual 999

PATROL Parameter Reference Manual 1000

Table 27 PATROL for Oracle 8.5.10 (Part 44 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
REPLICATION Application Class
InDoubtTrans Y con undef 1–100 undef set by coll graph number of two-phase
alarm commits
Shows any two-phase commits where the failure time is
greater than 2 minutes.

Collector: CollReplication
RPCsPending Y con undef undef undef set by coll graph deferred remote
procedure calls
Shows any deferred remote procedure calls.

Collector: CollReplication
RepConflicts Y con undef 1–100 undef set by coll graph number of jobs
alarm
Shows any jobs that have encountered a conflict.

Collector: CollReplication
SGA Application Class
BuffBusyRate Y con undef undef 100 set by coll graph percentage of block
alarm access attempts
Reports the percentage of all block access attempts that
resulted in waits in the last interval. The annotation
reports the delta values used in the calculation.

Collector: CollSGA
BuffHitRatio Y con undef 0–70 70–80 set by coll graph physical data blocks
alarm warn reads to requests
Reports the ratio of physical data blocks read to requests
for data blocks. The annotation reports the percentage of
data blocks read and the time interval used in the
calculation.

Collector: CollSGA
Table 27 PATROL for Oracle 8.5.10 (Part 45 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DictHitRatio Y con undef 0–90 90–95 set by coll graph percentage of
alarm warn requests
Reports the percentage of all requests for data dictionary
attributes that are resolved from the dictionary or row
cache. The annotation displays a report to help determine
which part of the cache are generating misses.

Collector: CollSGA
DictMisses Y con undef undef undef set by coll graph number of requests

Graphs the total number of requests that resulted in cache

misses (the information item was not saved in the data
dictionary cache).

Collector: CollSGA
DictRequests Y con undef undef undef set by coll graph number of request

Graphs the total number of requests that accessed the

data dictionary.

Collector: CollSGA
DictSlotsAvailable Y con undef undef undef set by coll graph number of slots

Graphs the number of slots in the queue for managing

buffers.

Collector: CollSGA
DictSlotsUsed Y con undef undef undef set by coll graph number of slots

Graphs the number of slots used for managing the buffers

that are available for read/write operations.

Collector: CollSGA

PATROL Parameter Reference Manual 1001

PATROL Parameter Reference Manual 1002

Table 27 PATROL for Oracle 8.5.10 (Part 46 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
DictTotalSlots Y con undef undef undef set by coll graph number of slots

Graphs the number of slots that can be used for managing

the buffers and read/write operations.

Collector: CollSGA
FreeBuffWait Y con undef 1–2 2–100 set by coll graph percentage of free
warn alarm buffer access
Reports the percentage of all free buffer access attempts attempts
that result in waits. The annotation reports the delta
values used in the calculation.

Collector: CollSGA
LatchGetRatio Y con undef 0–96 96–98 set by coll graph percentage of
alarm warn requests
Reports the percentage of attempts to acquire a latch that
are immediately successful. The annotation displays a
report to help determine which parts of the cache are
generating misses.

Collector: CollSGA
LibGetHitRatio Y con undef 0–90 90–95 set by coll graph percentage of
alarm warn requests
Reports the percentage of all attempts to lock library
cache entries that were immediately successful. The
annotation reports the delta values used in the
calculation.

Collector: CollSGA
LibGetHits Y con undef undef undef set by coll graph number of requests

Reports the number of all attempts to lock library cache

entries that were immediately successful.

Collector: CollSGA
Table 27 PATROL for Oracle 8.5.10 (Part 47 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LibGetPinRatio Y con undef 0–90 90–95 set by coll graph percentage of
alarm warn requests
Reports the percentage of all attempts to access a library
cache entry that were immediately successful because the
entry was present in its entirety. The annotation reports
the delta values used in the calculation.

Collector: CollSGA
LibGetRequests Y con undef undef undef set by coll graph number of requests

Graphs the number of all attempts to access the library

cache.

Collector: CollSGA
LibInvalidations Y con undef undef undef set by coll graph number of SQL
statements
Shows how many SQL statements accessed an object with
updated statistics in the data dictionary.

Collector: CollSGA
LibPinHits Y con undef undef undef set by coll graph number of requests

Reports the number of all attempts to access a library

cache entry that were immediately successful because the
entry was present in its entirety.

Collector: CollSGA
LibPinRequests Y con undef undef undef set by coll graph number of requests

Reports the number of all attempts to access a library

cache entry that were requested.

Collector: CollSGA

PATROL Parameter Reference Manual 1003

PATROL Parameter Reference Manual 1004

Table 27 PATROL for Oracle 8.5.10 (Part 48 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
LibReloads Y con undef undef undef set by coll graph library cache misses

Shows the number of library cache misses on execution

steps.

Collector: CollSGA
RollBuffBusyRate Y con undef undef undef set by coll graph percentage of block
gets
Reports the ratio of waits to block gets for rollback
segments over each polling interval.

Collector: CollSGA
TBSP_INSTANCE Application Class
AutoExtended Y con undef 1–1 undef set by coll none NA
warn
Signals when a tablespace has automatically extended
one or more of its datafiles. If the autoextend option is
mode is set to OFF, this parameter does not appear. In
warning and alarm states, the annotation shows the old
and new sizes of all the files in the tablespace.

Collector: CollTablespaces
BlkReads Y con undef undef undef set by coll graph logical block reads
per sec
Reports the total number of logical block reads per
second performed on the monitored tablespace in the last
interval.

Collector: CollTablespaces
Table 27 PATROL for Oracle 8.5.10 (Part 49 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
BlkWrites Y con undef undef undef set by coll graph block writes per sec

Reports the total number of logical block writes per

second performed on the monitored tablespace in the last
interval.

Collector: CollTablespaces
PctUsed Y con undef 90–95 95–100 set by coll graph percentage of space
warn alarm
Reports the percentage of space allocated to the (inactive by (inactive by
monitored tablespace. default) default)

Collector: CollTablespaces
PhyReads Y con undef undef undef set by coll graph physical block reads
per sec
Reports the total number of physical block reads per
second performed on the monitored tablespace in the last
interval.

Collector: CollTablespaces
PhyWrites Y con undef undef undef set by coll graph physical block writes
per sec
Reports the total number of physical block writes per
second performed on the monitored tablespace in the last
interval.

Collector: CollTablespaces
SpaceLeft Y con undef 1–1 undef set by coll graph MB
alarm
Reports the free space in megabytes left in the monitored (inactive by
tablespace. default)

Collector: CollTablespaces

PATROL Parameter Reference Manual 1005

PATROL Parameter Reference Manual 1006

Table 27 PATROL for Oracle 8.5.10 (Part 50 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
USERS Application Class
ActiveCalls Y con undef undef undef set by coll graph number of active
users
Reports the number of currently active users.

Collector: CollUsers
IDsInUse Y con undef undef undef set by coll graph number of connected
users
Reports the currently connect distinct users.

Collector: CollUsers
ProblemUsers Y con undef 1–100 undef set by coll graph number of problem
warn users
Reports any problem users in the last interval and, if a
problem user is found, reports the session details for the
user. The parameter checks for blocked users, idle users,
runaway users, and users who are using too much CPU.
The annotation reports the type of problem user, the
current value of the threshold, the current CPU
statement, and all locks held by the user.

Collector: CollUsers
Users Y con undef 0–0 0–0 set by coll graph number of user
warn alarm sessions
Reports the total number of user sessions.

Collector: : CollUsers
Table 27 PATROL for Oracle 8.5.10 (Part 51 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
USERS_INSTANCE Application Class
USRCpuSeconds Y con undef undef undef set by coll graph sec

Displays the CPU seconds consumed by the user session

(based on the Oracle statistic CPU used by this session).
To retrieve CPU data, the TIMED_STATISTICS
parameter in the init.ora file must be set to TRUE.

Collector: CollUsers
USRDiskSorts Y con undef undef undef set by coll graph percentage of sorts
not in memory
Displays the percentage of sorts not in memory (based on
the Oracle session statistic session disk sorts).

Collector: CollUsers
USRLogicalReads Y con undef undef undef set by coll graph number of logical
reads
Displays the number of logical reads performed by the
user session (based on the Oracle session statistic session
logical reads).

Collector: CollUsers
USRMemoryUsed Y con undef undef undef set by coll graph amount of memory

Displays the amount of available memory used by the

user session (based on the Oracle statistic session memory
used).

Collector: CollUsers

PATROL Parameter Reference Manual 1007

PATROL Parameter Reference Manual 1008

Table 27 PATROL for Oracle 8.5.10 (Part 52 of 52)

List of Output
Installation

Scheduling
(Poll Time)
Parameter

Icon Style
Active at

Alarm 2
Alarm1
Border

Values
Range

Range

Range

Units
Type
Parameter

or
USROpenCursors Y con undef undef undef set by coll graph number of current
cursors
Displays the number of current cursors opened by the
user session (based on the Oracle statistic current open
cursors).

Collector: CollUsers
USRPhysReads Y con undef undef undef set by coll graph number of physical
reads
Displays the number of physical reads performed by the
user session (based on the Oracle statistic physical reads).

Collector: CollUsers
USRPhysWrites Y con undef undef undef set by coll graph number of physical
writes
Displays the number of physical writes performed by the
user session (based on the Oracle statistic physical
writes).

Collector: CollUsers
PATROL for Oracle E-Business Suite 3.4.02

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 1 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
APPS_CPU Application Class
CpuSys Y con 0–100 90–95 96–100 set by coll graph percentage of CPU
alarm warn alarm system time
Displays the CPU system time utilization in percentage. utilization

Collector: CollOSPerformance
CpuUser Y con 0–100 90–95 96–100 set by coll graph percentage of CPU
alarm warn alarm user time utilization
Displays the CPU user time utilization in percentage.

Collector: CollOSPerformance
CpuUtil Y con 0–100 90–95 96–100 set by coll graph percentage of total
alarm after 2 warn after 2 alarm after 2 CPU utilization
Displays the total CPU utilization in percentage. times times times

Collector: CollOSPerformance
APPS_FILESYS Application Class
FSAvailableSpace Y con undef undef undef set by coll graph KB

Displays the file system available free space in kilobytes.

Collector: CollOSPerformance
FSCapacity Y con 0–100 96–98 99–100 set by coll gauge percentage of file
alarm warn alarm system utilization
Displays the file system utilization in percentage.

Collector: CollOSPerformance

PATROL Parameter Reference Manual 1009

PATROL Parameter Reference Manual 1010

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 2 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
FSFreeInodes Y con undef undef undef set by coll graph number of free i-
nodes
Displays the number of free i-nodes.

Collector: CollOSPerformance
FSInodePctUsed Y con undef 90–95 95–100 set by coll gauge percentage of i-node
warn alarm utilization
Displays the i-node utilization in percentage.

Collector: CollOSPerformance
APPS_FS_CONT Application Class
There are no parameters associated with the APPS_FS_CONT Application Class.
APPS_MEMORY Application Class
MemAvailable Y con undef undef undef set by coll graph KB

Displays the amount of available memory in kilobytes.

Note: This parameter does not appear in the UNIX

environment.

Collector: CollOSPerformance
MemFree Y con undef 0–100 101–200 set by coll graph number of 1000 page
alarm after 2 warn after 2 units
Displays the free memory in 1- K pages. times times

Collector: CollOSPerformance
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 3 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
MemPctUsed Y con undef 96–98 98–100 set by coll gauge percentage of
warn alarm memory utilization
Displays the percentage of memory that is used by Oracle
Apps.

Note: This parameter does not appear in the UNIX

environment.

Collector: CollOSPerformance
MemPgIn Y con undef undef undef set by coll graph number of pages

Displays the pages swapped in per second.

Collector: CollOSPerformance
MemPgOut Y con 0–100 10–15 16–100 set by coll graph number of pages
alarm warn alarm
Displays the pages swapped out per second.

Collector: CollOSPerformance
APPS_PRINT_CONT Application Class
There are no parameters associated with the APPS_PRINT_CONT Application Class.
APPS_PRINTER Application Class
PrtQueLength Y con undef undef undef set by coll graph number of jobs

Displays the number of jobs in the print queue.

Collector: CollOSPerformance
APPS_SWAP Application Class
SwapFree Y con undef undef undef set by coll graph KB blocks

Displays the system-wide free swap space in kilobyte

blocks.

Collector: CollOSPerformance

PATROL Parameter Reference Manual 1011

PATROL Parameter Reference Manual 1012

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 4 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
SwapFreePct Y con undef 0–5 6–10 set by coll graph percentage of space
alarm warn left
Displays the system-wide free swap space in percentage.

Collector: CollOSPerformance
SwapFreeSize Y con undef undef undef set by coll graph KB

Displays the system-wide free swap space in kilobytes.

Collector: CollOSPerformance
OA_ALERT Application Class
AlertMailStatus Y con 0–0 undef undef set by coll stoplight none
alarm
Displays the status of the mail process used by the Oracle
Applications Alert module. If the parameter measures a
value greater than 0, it goes into alarm since the mail
process is down.

Collector: CollAlert
ListALRExtOverThold Y con NA NA NA set by coll text none

Displays the list of Oracle Alert critical tables and their

associated indexes with extents over the high extent
threshold.

Collector: CollAlert
ListDupExp Y con NA NA NA set by coll text none

Displays the list of duplicated exceptions that occurred

during the last polling cycle.

Collector: CollAlert
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 5 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ListEventExp Y con NA NA NA set by coll text none

Displays the list of event exceptions that occurred during

the time period specified in the last polling cycle.

Collector: CollAlert
ListInvResponseExp Y con NA NA NA set by coll text none

Displays the list of invalid response exceptions that

occurred during the last polling cycle.

Collector: CollAlert
ListNoResponseExp Y con NA NA NA set by coll text none

Displays the list of no-response exceptions that occurred

during the time period specified in the last polling cycle.

Collector: CollAlert
ListPeriodicExp Y con NA NA NA set by coll text none

Displays the list of periodic exceptions that occurred

during the time period specified in the last polling cycle.

Collector: CollAlert
NumALRExtOverThold Y con 0–0 undef undef set by coll graph number of tables
alarm
Displays the number of critical tables and their associated
indexes for the Oracle Alert application with extents over
the high extent threshold.

Collector: CollAlert

PATROL Parameter Reference Manual 1013

PATROL Parameter Reference Manual 1014

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 6 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NumDupExp Y con 0–0 undef undef set by coll graph number of exceptions
alarm
Displays the duplicated exceptions that occurred during
the time period specified in the last polling cycle.

Collector: CollAlert
NumEventExp Y con undef undef undef set by coll graph number of exceptions

Displays the number of event exceptions that occurred

during the last polling cycle.

Collector: CollAlert
NumInvResponseExp Y con 0–0 undef undef set by coll graph number of exceptions
alarm
Displays the number of invalid response exceptions that
occurred since last collection. PATROL polls twice to get
the delta value before displaying a value in the
parameter. The value shown in the parameter will be the
difference between the value received from the first
polling cycle and the value received from the second
polling cycle.

Collector: CollAlert
NumNoResponseExp Y con 0–0 undef undef set by coll graph number of exceptions
alarm
Displays the number of no-response exceptions that
occurred during the last polling cycle.

Collector: CollAlert
NumPeriodicExp Y con undef undef undef set by coll graph number of exceptions

Displays the number of periodic exceptions that occurred

during the last polling cycle.

Collector: CollAlert
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 7 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
WorkFlowMailStatus Y con undef undef undef set by coll stoplight none

Displays the status of the work flow mailer process on a

designated node. If the mailer process is not running on
that node, the parameter goes into alarm status.

Collector: CollAlert
OA_ALL_SYS Application Class
DCMMonitor Y std NA NA NA 300 sec NA none

Displays the status of the operating system KM (up or

down), as well as the status of specific components.

Note: This parameter is invisible.

Collector: Sets its own value.

OA_AOL Application Class
ListAOLExtOverThold Y con NA NA NA set by coll text none

Displays the list of AOL critical tables and their

associated indexes with extents over the high extent
threshold.

Collector: CollApplications
NumAOLExtOverThold Y con 0–0 undef undef set by coll graph number of tables
alarm
Displays the number of critical tables and their associated
indexes with extents over the high extent threshold for
the AOL module.

Collector: CollApplications

PATROL Parameter Reference Manual 1015

PATROL Parameter Reference Manual 1016

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 8 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
OA_AP Application Class
ExpenseImportStatus Y con undef 1–1 undef set by coll stoplight none
alarm
Displays the status of the Payables Invoice Import
program and the related table records. If interface
transaction programs are scheduled, the parameter is
green; if the interface transaction programs are not
scheduled but the rows in the related interface table are
pending, the parameter is red.

Collector: CollInterface
ListAPCompletedReq Y con NA NA NA set by coll text none

Displays the list of all completed AP module requests

(normal, warning, error) during the last polling cycle.

Collector: CollConcurrentReq
ListAPExtOverThold Y con NA NA NA set by coll text none

Displays the list of AP critical tables and their associated

indexes with extents over the high extent threshold.

Collector: CollDatabase
ListAPProcess Y con NA NA NA set by coll text none

Displays the list of AP processes, which includes user

login processes and concurrent manager processes.

Collector: CollApplProcess
ListAPUserLogin Y con NA NA NA set by coll text none

Displays the list of current user login sessions in AP.

Collector: CollApplUser
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 9 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ListErrExpenseImport Y con NA NA NA set by coll text none

Lists the details of the AP Expense Report Transactions

table rows that contain errors.

Collector: CollInterface
ListErrPayablesOpenImport Y con NA NA NA set by coll text none

Lists the details of the AP Invoice Transactions table rows

that contain errors.

Collector: CollInterface
NumAPCheck Y con undef undef undef set by coll graph number of checks

Displays the number of AP checks issued since the last

OA_AP discovery.

Collector: CollApplications
NumAPCompletedReq Y con undef undef undef set by coll graph number of requests

Displays the number of all completed AP requests

(normal, warning, error) during the last polling cycle.

Collector: CollConcurrentReq
NumAPExtOverThold Y con 0–0 undef undef set by coll graph number of tables
alarm
Displays the number of AP critical tables and their
associated indexes with extents over the high extent
threshold.

Collector: CollDatabase

PATROL Parameter Reference Manual 1017

PATROL Parameter Reference Manual 1018

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 10 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NumAPInv Y con undef undef undef set by coll graph number of invoices

Displays the number of AP invoices entered since the last

OA_AP discovery.

Collector: CollApplications
NumAPInvalChk Y con undef undef undef set by coll graph number of checks

Displays the number of invalid AP checks issued since

the last OA_AP discovery.

Collector: CollApplications
NumAPInvLine Y con undef undef undef set by coll graph number of lines

Displays the number of AP invoice lines entered since the

last OA_AP discovery.

Collector: CollApplications
NumAPInvOnHold Y con undef undef undef set by coll graph number of invoices

Displays the total number of AP invoices put on hold

during any given polling cycle.

Collector: CollApplications
NumAPProcess Y con undef undef undef set by coll graph number of processes

Displays the number of AP processes, which includes

both user login processes and concurrent manager
processes.

Collector: CollApplProcess
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 11 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NumAPUserLogin Y con undef undef undef set by coll graph number of users

Displays the number of current user login sessions in AP.

Collector: CollApplUser
NumErrExpenseImport Y con undef 1–1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the AP Expense Report
Transaction tables that contain errors.

Collector: CollInterface
NumErrPayablesOpenImport Y con undef 1–1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the AP Invoice
Transaction tables that contain errors.

Collector: CollInterface
PayablesOpenImportStatus Y con undef 1–1 undef set by coll stoplight none
alarm
Displays the status of the Payables Open Interface Import
program and the related table records. If interface
transaction programs are scheduled, the parameter is
green; if the interface transaction programs are not
scheduled but the rows in the related interface table are
pending, the parameter is red.

Collector: CollInterface

PATROL Parameter Reference Manual 1019

PATROL Parameter Reference Manual 1020

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 12 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
OA_APACHE Application Class
ApacheStatus Y con undef 1–1 undef set by coll stoplight none
alarm
Displays the status of the Apache processes. The stoplight
appears green when Apache is up; and a red stoplight
indicates Apache is down. Each instance of this class
monitors the Apache on a specified application server.

Collector: CollWebServer
ListApacheProcess Y con NA NA NA set by coll text none

Displays a list of all Apache processes that are currently

running.

Collector: CollWebServer
NumApacheProcess Y con undef undef undef set by coll graph number of processes

Displays the number of Apache processes completed

during the last discovery cycle.

Collector: CollWebServer
OA_APINTRFC Application Class
ExpenseImportStatus Y con undef 0–0 undef set by coll stoplight none
alarm
Displays the status of the Payables Invoice Import
program and the related table records. If interface
transaction programs are scheduled, the parameter is
green; if the interface transaction programs are not
scheduled but the rows in the related interface table are
pending, the parameter is red.

Collector: CollInterface
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 13 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ListErrExpenseImport Y con NA NA NA set by coll text none

Lists the details of the AP Expense Report Transactions

table rows that contain errors.

Collector: CollInterface
ListErrPayablesOpenImport Y con NA NA NA set by coll text none

Lists the details of the AP Invoice Transactions table rows

that contain errors.

Collector: CollInterface
NumErrExpenseImport Y con undef 1–1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the AP Expense Report
Transaction tables that contain errors.

Collector: CollInterface
NumErrPayablesOpenImport Y con undef 1–1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the AP Invoice
Transaction tables that contain errors.

Collector: CollInterface
PayablesOpenImportStatus Y con undef 1–1 undef set by coll stoplight none
alarm
Displays the status of the Payables Open Interface Import
program and the related table records. If interface
transaction programs are scheduled, the parameter is
green; if the interface transaction programs are not
scheduled but the rows in the related interface table are
pending, the parameter is red.

Collector: CollInterface

PATROL Parameter Reference Manual 1021

PATROL Parameter Reference Manual 1022

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 14 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
OA_APP_CONT Application Class
There are no parameters associated with the OA_APP_CONT Application Class.
OA_APPLICATION Application Class
There are no parameters associated with the OA_APPLICATION Application Class.
OA_APPSERV Application Class
There are no parameters associated with the OA_APPSERV Application Class.
OA_AR Application Class
AutoinvoiceImportStatus Y con undef 1–1 undef set by coll stoplight none
alarm
Displays the status of the Autoinvoice Master program
and the related table records. If interface transaction
programs are scheduled, the parameter is green; if the
interface transaction programs are not scheduled but the
rows in the related interface table are pending, the
parameter is red.

Collector: CollInterface
CustomerIntrfcStatus Y con undef 1–1 undef set by coll stoplight none
alarm
Displays the status of the Customer Interface program
and the related table records. If interface transaction
programs are scheduled, the parameter is green; if the
interface transaction programs are not scheduled but the
rows in the related interface table are pending, the
parameter is red.

Collector: CollInterface
ListARCompletedReq Y con NA NA NA set by coll text none

Displays the list of all AR requests (normal, warning,

error) completed during the last polling cycle.

Collector: CollConcurrentReq
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 15 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ListARExtOverThold Y con NA NA NA set by coll text none

Displays the list of AR critical tables with extents over the

high extent threshold.

Collector: CollDatabase
ListARProcess Y con NA NA NA set by coll text none

Displays the list of AR processes, which includes both

user login processes and concurrent manager processes.

Collector: CollApplProcess
ListARUserLogin Y con NA NA NA set by coll text none

Displays the list of current user login sessions in AR.

Collector: CollApplProcess
ListErrArPaymentsIntrfc Y con NA NA NA set by coll text none

Lists the details of the AR Payments Interface

Transactions table rows that contain errors.

Collector: CollInterface
ListErrCashRcptLinesIntrfc Y con NA NA NA set by coll text none

Lists the details of the AR Interim Cash Rcpt Lines

Interface Transactions table rows that contain errors.

Collector: CollInterface
ListErrRaCustomersIntrfc Y con NA NA NA set by coll text none

Lists the details of the Customer Details Interface

Transactions table rows that contain errors.

Collector: CollInterface

PATROL Parameter Reference Manual 1023

PATROL Parameter Reference Manual 1024

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 16 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ListErrRaLinesIntrfc Y con NA NA NA set by coll text none

Lists the details of the RA Line Details Interface

Transactions table rows that contain errors.

Collector: CollInterface
ListErrSalesTaxRateIntrfc Y con NA NA NA set by coll text none

Lists the details of the AR Tax Interface Transactions table

rows that contain errors.

Collector: CollInterface
NumARAdjust Y con undef undef undef set by coll graph number of invoices

Displays the number of adjusted AR invoices entered

since the last OA_AR discovery.

Collector: CollApplications
NumARCompletedReq Y con undef undef undef set by coll graph number of requests

Displays the number of all AR requests (normal, warning,

error) completed since the last collection. The PATROL
for Oracle E-Business Suite will poll twice to get the delta
value before displaying a value in the parameter. The
value shown in the parameter will be the difference
between the value received from the first polling cycle
and the value received from the second polling cycle.

Collector: CollConcurrentReq
NumARCrdMemo Y con undef undef undef set by coll graph number of credit
memos
Displays the number of AR credit memos issued since the
last OA_AR discovery.

Collector: CollApplications
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 17 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NumARDispute Y con undef undef undef set by coll graph number of invoices

Displays the number of disputed AR invoices entered

since the last OA_AR discovery.

Collector: CollApplications
NumARExtOverThold Y con 0–0 undef undef set by coll graph number of tables
alarm
Displays the number of AR critical tables and their
associated indexes with extents over the high extent
threshold.

Collector: CollDatabase
NumARInv Y con undef undef undef set by coll graph number of invoices

Displays the number of AR invoices entered since the last

OA_AR discovery.

Collector: CollApplications
NumARProcess Y con undef undef undef set by coll graph number of processes

Displays the number of AR processes, which includes

both user login processes and concurrent manager
processes.

Collector: CollApplProcess
NumARReceipt Y con undef undef undef set by coll graph number of receipts

Displays the number of AR receipts issued since the last

OA_AR discovery.

Collector: CollApplications

PATROL Parameter Reference Manual 1025

PATROL Parameter Reference Manual 1026

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 18 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NumARUserLogin Y con undef undef undef set by coll graph number of users

Displays the number of current user login sessions in AR.

Collector: CollApplUser
NumErrArPaymentsIntrfc Y con undef 1–1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the AR Payments
Interface Transactions tables that contain errors.

Collector: CollInterface
NumErrCashRcptLinesIntrfc Y con undef 1–1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the AR Interim Cash Rcpt
Lines Interface Transactions tables that contain errors.

Collector: CollInterface
NumErrRaCustomersIntrfc Y con undef 1–1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the Customer Details
Interface Transactions tables that contain errors.

Collector: CollInterface
OA_ARINTRFC Application Class
AutoinvoiceImportStatus Y con undef 1–1 undef set by coll stoplight none
alarm
Displays the status of the Autoinvoice Master program
and the related table records. If interface transaction
programs are scheduled, the parameter is green; if the
interface transaction programs are not scheduled but the
rows in the related interface table are pending, the
parameter is red.

Collector: CollInterface
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 19 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
CustomerIntrfcStatus Y con undef 1–1 undef set by coll stoplight none
alarm
Displays the status of the Customer Interface program
and the related table records. If interface transaction
programs are scheduled, the parameter is green; if the
interface transaction programs are not scheduled but the
rows in the related interface table are pending, the
parameter is red.

Collector: CollInterface
ListErrArPaymentsIntrfc Y con NA NA NA set by coll text none

Lists the details of the AR Payments Interface

Transactions table rows that contain errors.

Collector: CollInterface
ListErrCashRcptLinesIntrfc Y con NA NA NA set by coll text none

Lists the details of the AR Interim Cash Rcpt Lines

Interface Transactions table rows that contain errors.

Collector: CollInterface
ListErrRaCustomersIntrfc Y con NA NA NA set by coll text none

Lists the details of the Customer Details Interface

Transactions table rows that contain errors.

Collector: CollInterface
ListErrRaLinesIntrfc Y con NA NA NA set by coll text none

Lists the details of the RA Line Details Interface

Transactions table rows that contain errors.

Collector: CollInterface

PATROL Parameter Reference Manual 1027

PATROL Parameter Reference Manual 1028

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 20 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ListErrSalesTaxRateIntrfc Y con NA NA NA set by coll text none

Lists the details of the AR Tax Interface Transactions table

rows that contain errors.

Collector: CollInterface
NumErrArPaymentsIntrfc Y con undef 1–1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the AR Payments
Interface Transactions tables that contain errors.

Collector: CollInterface
NumErrCashRcptLinesIntrfc Y con undef 1–1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the AR Interim Cash Rcpt
Lines Interface Transactions tables that contain errors.

Collector: CollInterface
NumErrRaCustomersIntrfc Y con undef 1–1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the Customer Details
Interface Transactions tables that contain errors.

Collector: CollInterface
NumErrRaLinesIntrfc Y con undef 1-1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the RA Line Details
Interface Transactions tables that contain errors.

Collector: CollInterface
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 21 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NumErrSalesTaxRateIntrfc Y con undef 1-1000 undef set by coll graph number of table rows
alarm
Displays the number of rows in the AR Tax Interface
Transactions tables that contain errors.

Collector: CollInterface
SalesTaxRateIntrfcStatus Y con undef 1-1 undef set by coll stoplight none
alarm
Displays the status of the Sales Tax Rate Interface
program and the related table records. If interface
transaction programs are scheduled, the parameter is
green; if the interface transaction programs are not
scheduled but the rows in the related interface table are
pending, the parameter is red.

Collector: CollInterface
OA_AVAILABILITY Application Class
ListDBAppError Y con NA NA NA set by coll text none

Lists errors found in either the Oracle database or Oracle

Applications during the period specified in the error
display window, including the time and error
information.

Collector: CollAvailability
NumAppError Y con 0-0 undef undef set by coll graph number of errors
alarm
Displays the number of errors of the internal manager of
Oracle Applications during the time period specified in
the error display window. The parameter goes into alarm
if an application error has been detected.

Collector: CollAvailability

PATROL Parameter Reference Manual 1029

PATROL Parameter Reference Manual 1030

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 22 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
NumDBError Y con 0-0 undef undef set by coll graph number of errors
alarm
Displays the number of database errors that occurred
during the time period specified in the error display
window. The parameter goes into alarm if a database
error has been detected.

Collector: CollAvailability
OAStatus Y con undef 1–1 2–2 set by coll stoplight none
warn alarm
Displays the status of the Oracle application. This status
is a combination of DbStatus, SqlNetStatus, Concurrent
managers, Forms server, Web server, Metrics Server and
Metrics Client.
If the DB listener, the application listener, the Internal
manager, and the Conflict Resolution manager are up
and running, the parameter is a green stoplight. The
parameter is a red stoplight if one or more of the
following is down: DB listener, application listener,
Internal manager, and Conflict Resolution manager. The
OAStatus parameter is a yellow stoplight (warning
status), if one or more of the middle-tier application
servers is down.

Collector: CollAvailability
OA_BOM Application Class
BomBillRoutingIntrfcStatus Y con undef 1–1 undef set by coll stoplight none
alarm
Displays the status of the Bill and Routing Interface
program and the related table records. If interface
transaction programs are scheduled, the parameter is
green; if the interface transaction programs are not
scheduled but the rows in the related interface table are
pending, the parameter is red.

Collector: CollInterface
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 23 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ListBOMCompletedReq Y con NA NA NA set by coll text none

Displays the list of all BOM requests (normal, warning,

error) completed during the last polling cycle.

Collector: CollConcurrentReq
ListBOMExtOverThold Y con NA NA NA set by coll text none

Displays the list of BOM critical tables and their

associated indexes with extents over the high extent
threshold.

Collector: CollDatabase
ListBOMProcess Y con NA NA NA set by coll text none

Displays the list of BOM processes, which include user

login processes and concurrent manager processes.

Collector: CollApplProcess
ListBOMUserLogin Y con NA NA NA set by coll text none

Displays the list of current user login sessions in BOM.

Collector: CollApplUser
ListErrBomBillMtlsIntrfc Y con NA NA NA set by coll text none

Lists the details of the BOM Transactions Interface table

rows that contain errors.

Collector: CollInterface

PATROL Parameter Reference Manual 1031

PATROL Parameter Reference Manual 1032

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 24 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ListErrBomInvCompIntrfc Y con NA NA NA set by coll text none

Lists the details of the BOM Inventory Components

Transactions Interface table rows that contain errors.

Collector: CollInterface
ListErrBomOpResIntrfc Y con NA NA NA set by coll text none

Lists the details of the BOM Operation Resources

Transaction Interface table rows that contain errors.

Collector: CollInterface
ListErrBomOpRoutIntrfc Y con NA NA NA set by coll text none

Lists the details of the BOM Operation Routings

Transaction Interface table rows that contain errors.

Collector: CollInterface
ListErrBomOpSeqIntrfc Y con NA NA NA set by coll text none

Lists the details of the BOM Operation Sequences

Transaction Interface table rows that contain errors.

Collector: CollInterface
ListErrBomRefDesgIntrfc Y con NA NA NA set by coll text none

Lists the details of the BOM Reference Designators

Transaction Interface table rows that contain errors.

Collector: CollInterface
Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 25 of 121)

List of Output
Installation

Scheduling
(poll time)
Parameter
Active at

Alarm1

Alarm2
Border

Values
Range

Range

Range

Units
Style
Type

Icon
Parameter

or
ListErrBomSubCompIntrfc Y con NA NA NA set by coll text none

Lists the details of the BOM Substitute Components

Transaction Interface table rows that contain errors.

Collector: CollInterface
NumBOMBillofMtl Y con undef undef undef set by coll graph number of records

Displays the number BOM header records entered or

revised since the last OA_BOM discovery.

Collector: CollApplications
NumBOMCompletedReq Y con undef undef undef set by coll graph number of requests

Displays the number of all BOM requests (normal,

warning, error) completed during the last polling cycle.

Collector: CollConcurrentReq
NumBOMExtOverThold Y con 0–0 undef undef set by coll graph number of tables
alarm
Displays the number of BOM critical tables and their
associated indexes with extents over the high extent
threshold.

Collector: CollDatabase
NumBOMInvComp Y con undef undef undef set by coll graph number of lines

Displays the number BOM inventory component lines

entered since the last OA_BOM discovery.

Collector: CollApplications

PATROL Parameter Reference Manual 1033

PATROL Parameter Reference Manual 1034

Table 28 PATROL for Oracle E-business Suite 3.4.02 (Part 26 of 121)

List of Output
Installation

Scheduling