2016

CATALOG & SPECIFICATION GUIDE

HOLLAND FIFTH WHEELS

OFFERING THE MOST EXTENSIVE

RANGE OF FIFTH WHEEL MODELS
TO MEET YOUR APPLICATION NEEDS

XL-FW10066SG-en-US Rev K
YOUR COMPLETE SOURCE
FOR COMMERCIAL VEHICLE
PRODUCT SOLUTIONS

In 2006, two industrial icons merged

to form SAF-HOLLAND, a global leader in
the design and manufacture of high-quality
components and systems for the commercial
vehicle industry. Today, SAF-HOLLAND represents
a range of brands providing suspension/axle
systems, fifth wheels, kingpins, coupling products,
and landing gear solutions for truck, tractor,
bus, and trailer applications.

➤ FIFTH WHEELS ➤ MECHANICAL SUSPENSION/ ➤ SEVERE-DUTY VOCATIONAL

➤ LANDING GEAR AXLE SYSTEMS AIR-RIDE SUSPENSIONS

➤ KINGPINS ➤ TRAILER AXLES/BRAKES ➤ BUS AIR-RIDE SUSPENSIONS

➤ COUPLINGS ➤ AIR-RIDE SUSPENSION/ ➤ STEER AIR-RIDE

AXLE SYSTEMS SUSPENSIONS

➤ KINGPINS

www.safholland.com
 Why HOLLAND Fifth Wheels?

HOLLAND has the Solution

HOLLAND fifth wheels have earned a reputation of exceptional durability, reliability, and driver
productivity that continues to ˝raise the bar˝ on fifth wheel performance standards, while lowering
the total cost-of-ownership. The HOLLAND fifth wheel product line is the most comprehensive in
the world, with designs for applications as varied as light commercial fifth wheels for small trailers
and recreational applications all the way to applications requiring up to 165,000 lbs. (74,844 kg.)
of vertical load capacity. As the fifth wheel industry’s technological leader, HOLLAND fifth wheels
have been a part of virtually every fifth wheel innovation.
• KOMPENSATOR® Mounting Base
• ELI™ – Electronic Lock Indicator
• NoLube™ Fifth Wheel (world’s only completely lubrication free fifth wheel)
• FW17 Low-Weight Top Plate
• ILS™ – Integrated Low-Weight Slider
• FWAL Forged Aluminum Fifth Wheel (world’s lightest fifth wheel - over 100 lbs. lighter)
Whatever the demands of your application, HOLLAND has the solution.

Guaranteed Performance
A fifth wheel is only as good as the company that stands behind it, and SAF-HOLLAND has taken
supplier accountability to the next level by offering the industry’s first ˝wear-out˝ (performance)
guarantee. Backed by the industry’s most extensive fifth wheel testing process, SAF-HOLLAND not
only provides the longest fifth wheel material and workmanship warranties in the industry, but
guarantees their durability as well.
Simply put:
• No front lock insert replacements
• No lock jaw replacements
• No rebuilds
For specific details, please see the appropriate fifth wheel warranty statement. SAF-HOLLAND
leads the industry with proven value, high performance, and exceptional operating and economic
advantages. With superior after-sales service, offering over 4,600 distributor and OEM locations
across the globe, SAF-HOLLAND is committed to quality from start to finish.

Can you afford not to spec HOLLAND fifth wheels?

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 1

Table of Contents

FIFTH WHEEL CATALOG

Application Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Options Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
HOLLAND Fifth Wheel Top Plate Models
Standard
FW35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
FW33 LowLube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
FW31 NoLube™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
FW17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
FW16 LowLube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FWAL Aluminum LowLube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Severe Duty
FW0070 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
FW0100/FW0165 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Severe Duty/Fully Oscillating

FW2080 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Terminal Tractor
FW35-03344 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
FW2870 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Terminal Tractor/Elevating
FW2800/FW2900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Light Commercial
FW6000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FW0001/FW0002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Mounting Systems
Stationary Mounts (FW35, FW33, FW31, FW17, FW16, FWAL)
Foot Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Integrated Plate Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Bracket for Angle Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Bracket with Angle Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Sliding Mounts (FW35, FW33, FW31, FW17, FW16, FWAL)

ILS™ Outboard Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ILS™ Inboard Mount (Over-the-Frame) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

2 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Table of Contents

Mounting Systems continued

FW0070 Series Stationary Mounts
Foot Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Integrated Plate Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Bracket for Angle Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Bracket with Angle Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

FW0070 Series Sliding Mounts

Inboard for Angle Mounting (Over-the-Frame) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

No-Tilt Stationary Mounts (FW35, FW33)

Outboard Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Inboard for Angle Mounting (Over-the-Frame) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

No-Tilt Sliding Mounts (FW35, FW33)

ILS™ Outboard Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
ILS™ Inboard for Angle Mounting (Over-the-Frame) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Kompensator® Stationary Mounts (FW35, FW33 and FW0070)

Outboard Plate Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Kompensator® Sliding Mounts (FW35, FW33 and FW0070)

Inboard for Angle Mounting (Over-the-Frame) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Custom Service Tools for Fifth Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

SPECIFICATION GUIDE
Specification Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Items to Consider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Assembly Part Numbers and Dimensions
FW35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
FW33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
FW31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
FW17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
FW16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
FWAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
FW0070 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
FW2570 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
FW7040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
FW7090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
FW0100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
FW0165 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
FW2080 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 3

 THIS PAGE INTENTIONALLY LEFT BLANK

4 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

APPLICATION
GUIDE

OPTIONS
OVERVIEW
Application Guide

Standard Duty (1)

Weight (GCW): ��������������������������������������������� Less than 95,000 lbs. (43,000 kg.)

Gross Combination Weight (GCW)
Road Type: ���������������������������������������������������� 100% On-Road (maintained concrete or asphalt roads)

Trailer Type and Axle Limitation (2):

Single Trailer ˝A˝ Train—Maximum of 3 Axles ˝B˝ Train—Maximum of 3 Axles

Tandem Axle Only (Trailer and Dolly Converter) (Lead and ˝Pup˝ Trailer)
Pivot Point Pivot Point

Note: Any tractor used for ˝short haul˝ (e.g. city pickup and delivery) is to be considered ˝Moderate Duty˝

Standard Duty
LowLube LowLube NoLube™ Alum. LowLube
Top Plate 17 (XA-17) 16 (XA-161) 35 (XA-351) 33 (XA-331) 31 (XA-311) AL (XA-AL)
Maximum Vertical Load 50,000 lbs. 50,000 lbs. 55,000 lbs. 55,000 lbs. 55,000 lbs. 55,000 lbs.
22,700 kg. 22,700 kg. 25,000 kg. 25,000 kg. 25,000 kg. 25,000 kg.
150,000 lbs. 150,000 lbs. 150,000 lbs. 150,000 lbs. 150,000 lbs. 150,000 lbs.
Maximum Drawbar Pull 68,000 kg. 68,000 kg. 68,000 kg. 68,000 kg. 68,000 kg. 68,000 kg.
Mounting Style Stationary Sliding Stationary Sliding Stationary Sliding Stationary Sliding Stationary Sliding Stationary Sliding
Tractors
Van Trailers ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Tanker & Dry Bulk Trailers ✓ ✓ ✓ ✓ Komp Available (3)(4) Komp Available (3)(4) ✓ ✓ ✓ ✓
Flatbed, Stretch & Pole Trailers ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
End Dump (Framed Trailers) ✓ ✓ ✓ ✓ ✓ ✓
End Dump (Frameless) Trailers No-Tilt Only (5) No-Tilt Only (5)
Side Dump Trailers No-Tilt Only (6)
No-Tilt Only (6)
Bottom Dump Trailers Komp Available (3)(4)
Komp Available (3)(4)
Lowboy Trailers Komp Available (3)(4)
Komp Available (3)(4)
B-Trains
Van, Flatbed & Stretch Trailers ✓ ✓ ✓ ✓ Komp Available (3)(4) Komp Available (3)(4) ✓ ✓ ✓ ✓
Tank & Bottom Dump Trailers Komp Available (3)(4) Komp Available (3)(4) ✓ ✓ ✓ ✓
End Dump Trailers ✓ ✓ ✓ ✓
Side Dump Trailers No-Tilt Only (6) No-Tilt Only (6)
Converter Dollies ✓ ✓ ✓ ✓ ✓ ✓

NOTES: (1) If any single limitation factor is exceeded within a given duty type, you must move up to the next duty level.
(2) The term ˝Axle Limitation˝, as used in this guide, refers to the total number of axles on the ˝towed vehicle(s)˝ or trailer(s).
(3) The Kompensator® fifth wheel mounting system can only be used where the loaded center of gravity of the trailer is no more than 44˝ (1100 mm) above the fifth wheel.
(4) ˝Kompensator® Available˝ means that stationary and sliding Kompensator® mounting systems are available as well as standard stationary and sliding mounting systems.
(5) Trailers equipped with an oscillating/articulating bolster (kingpin) plate require a non-articulating fifth wheel such as a No-Tilt.
(6) Due to the increased forces developed in side dump operations, only “No-Tilt” model FW35 fifth wheels are approved for this application.

6 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Application Guide

Moderate Duty (1)

Weight (GCW): ��������������������������������������������� Less than 115,000 lbs. (52,000 kg.)

Gross Combination Weight (GCW)
Road Type: ���������������������������������������������������� Less than 10% Off-Road (gravel or crushed rock roads) with balance On-Road
(maintained concrete or asphalt roads)
Trailer Type and Axle Limitation (2):

Single Trailer ˝A˝ Train—Maximum of 4 Axles ˝B˝ Train—Maximum of 4 Axles

Tandem and Tri-axle Only (Trailer and Dolly Converter) (Lead and ˝Pup˝ Trailer)
Pivot Point Pivot Point

Note: Any tractor used for ˝short haul˝ (e.g. city pickup and delivery) is to be considered ˝Moderate Duty˝

Moderate Duty
Top Plate 35 (XA-351) 33 (XA-331) LowLube 0070 (XA-71) 2080 (XA-2081)
Maximum Vertical Load 55,000 lbs. 55,000 lbs. 70,000 lbs. 70,000 lbs.
25,000 kg. 25,000 kg. 31,750 kg. 31,750 kg.
Maximum Drawbar Pull 150,000 lbs. 150,000 lbs. 200,000 lbs. 150,000 lbs. 200,000 lbs.
68,000 kg. 68,000 kg. 90,700 kg. 68,000 kg. 90,700 kg.
Mounting Style Stationary Sliding Stationary Sliding Stationary Sliding Stationary
Tractors
Van Trailers ✓ ✓ ✓ ✓ ✓ ✓
Tanker & Dry Bulk Trailers Komp Available (3)(4)(7) Komp Available (3)(4)(7) Komp Available (3)(4)
Flatbed, Stretch & Pole Trailers ✓ ✓ ✓ ✓ ✓ ✓
End Dump (Framed Trailers) ✓ ✓ ✓ ✓ ✓ ✓
End Dump (Frameless) Trailers No-Tilt Only (5) No-Tilt Only (5)
Side Dump Trailers No-Tilt Only (6)
No-Tilt Only (6) ✓ ✓
Bottom Dump Trailers Komp Available (3)(4)(7)
Komp Available (3)(4)(7) Komp Available (3)(4) ✓
Lowboy Trailers Komp Available (3)(4)(7) Komp Available (3)(4)(7) ✓ ✓ ✓
B-Trains
Van, Flatbed & Stretch Trailers Komp Available (3)(4)(7) Komp Available (3)(4)(7) ✓ ✓
Tank & Bottom Dump Trailers Komp Only (3)(7)
Komp Only (3)(7) Komp Only (3)
End Dump Trailers ✓ ✓ ✓ ✓ ✓ ✓
Side Dump Trailers No-Tilt Only (6) No-Tilt Only (6)
Converter Dollies Komp Available (3)(4)(7) Komp Available (3)(4)(7) Komp Available (3)(4)

NOTES: (1) If any single limitation factor is exceeded within a given duty type, you must move up to the next duty level.
(2) The term ˝Axle Limitation˝, as used in this guide, refers to the total number of axles on the ˝towed vehicle(s)˝ or trailer(s).
(3) The Kompensator® fifth wheel mounting system can only be used where the loaded center of gravity of the trailer is no more than 44˝ (1100 mm) above the fifth wheel.
(4) ˝Kompensator® Available˝ means that stationary and sliding Kompensator® mounting systems are available as well as standard stationary and sliding mounting systems.
(5) Trailers equipped with an oscillating/articulating bolster (kingpin) plate require a non-articulating fifth wheel such as a No-Tilt.
(6) Due to the increased forces developed in side dump operations, only “No-Tilt” model FW35 fifth wheels are approved for this application.
(7) Moderate Duty applications require “7720” Series plate mounts for Kompensator® stationary mountung systems.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 7

Application Guide

Severe Duty (1)

Weight (GCW): ��������������������������������������������� More than 115,000 lbs. (52,000 kg.)

Gross Combination Weight (GCW)
Road Type: ���������������������������������������������������� More than 10% Off-Road (gravel, crushed rock, hard packed dirt, or
unimproved / unmaintained roads)
Trailer Type and Axle Limitation (2): ������������

Single Trailer ˝A˝ Train—No Axle Limitations ˝B˝ Train—No Axle Limitations
No Axle Limitations

Pivot Point Pivot Point

Severe Duty
Top Plate 35 (XA-351) 0070 (XA-71) 2080 (XA-2081) 0100 (XA-101) 0165 (XA-0116)
Maximum Vertical Load 55,000 lbs. 70,000 lbs. 70,000 lbs. 100,000 lbs. 165,000 lbs.
25,000 kg. 31,750 kg. 31,750 kg. 45,350 kg. 74,850 kg.
Maximum Drawbar Pull 150,000 lbs. 200,000 lbs. 150,000 lbs. 200,000 lbs. 200,000 lbs. 200,000 lbs.
68,000 kg. 90,700 kg. 68,000 kg. 90,700 kg. 90,700 kg. 90,700 kg.
Mounting Style Stationary (7) Sliding (8) Stationary Sliding Stationary Stationary Stationary

Tractors
Van Trailers ✓ ✓ ✓ ✓ ✓ ✓
Tanker & Dry Bulk Trailers Komp Available (3)(4)(9) Komp Available (3)(4)(10)
Flatbed, Stretch & Pole Trailers ✓ ✓ ✓ ✓ ✓ ✓
End Dump (Framed Trailers) ✓ ✓ ✓ ✓ ✓ ✓✓
End Dump (Frameless) Trailers No-Tilt Only (5)
Side Dump Trailers No-Tilt Only (6) ✓ ✓
Bottom Dump Trailers Komp Available (3)(4)(9) Komp Available (3)(4)(10) ✓ (11)
✓
Lowboy Trailers Komp Available (3)(4)(9) Komp Available (3)(4)(10) ✓ (11)
✓
B-Trains
Van, Flatbed & Stretch Trailers Komp Available (3)(4)(7) ✓ ✓
Tank & Bottom Dump Trailers Komp Only (3)(7) Komp Only (3)
End Dump Trailers ✓ ✓ ✓ ✓
Side Dump Trailers No-Tilt Only (6)

NOTES: (1) If any single limitation factor is exceeded within a given duty type, you must move up to the next duty level.
(2) The term ˝Axle Limitation˝, as used in this guide, refers to the total number of axles on the ˝towed vehicle(s)˝ or trailer(s).
(3) The Kompensator® fifth wheel mounting system can only be used where the loaded center of gravity of the trailer is no more than 44˝ (1100 mm) above the fifth wheel.
(4) ˝Kompensator® Available˝ means that stationary and sliding Kompensator® mounting systems are available as well as standard stationary and sliding mounting systems.
(5) Trailers equipped with an oscillating/articulating bolster (kingpin) plate require a non articulating fifth wheel such as a No-Tilt.
(6) Due to the increased forces developed in side dump operations, only “No-Tilt” model FW35 fifth wheels are approved for this application.
(7) Severe Duty applications require “7500” Series brackets for standard stationary mounting systems.
(8) Severe Duty applications require “7000” Series or “8000” Series sliders for standard sliding mounting systems. GCW limited to 160,000 lbs. ILS approved for No-Tilt applications.
(9) Severe Duty applications require “7720” Series plate mounts for Kompensator® stationary mounting systems.
(10) Severe Duty applications require “7770” Series plate mounts for KOMPENSATOR stationary mounting systems.
(11) A fully oscillating fifth wheel should only be used when the loaded center of gravity of the trailer is at or below the fifth wheel height.

8 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Fifth Wheel Top Plates / Options Overview

Fifth Wheel Assembly FW17 FW16 FW35 FW33 FW31 FWAL

(Top Plate) (XA-17) (XA-16) (XA-351) (XA-331 (XA-311) (XA-AL)
Air Release – Allows in-cab release of fifth wheel locking mechanism. 3 3 3 3 3 3
Drilled and Tapped for Auto Lube – Provides a central point
(manifold) of lubrication that distributes lubrication to all friction 3 3
points between tractor and trailer.
ELI™ (Electronic Lock Indicator) – Allows in-cab management
of the coupling process, via a coupling status display, as a 3 3 3
supplement to visual inspection and pull test procedure.
Standard Fifth Wheels

Kompensator® Lockouts – Allows lock out of the Kompensator®

feature to make the fifth wheel semi-oscillating when required. 3 3
Dolly Release Handle – Provides easier release handle access. 3 3
Manual Secondary Lock – Provides additional security lock that is
manually disengaged and automatically engaged during uncoupling 3 3 3
and coupling.
LowLube – Provides a grease-free fifth wheel coupling surface.
Standard Standard Standard
Only requires lubrication of the locking mechanism.

NoLube™ – Provides completely grease-free fifth wheel coupling

Standard
surface. Only requires no lubrication, including the locking mechanism.
No-Tilt – Allows semi-oscillating fifth wheel to convert to
non-oscillating fifth wheel when required. 3 3
Right Hand Release – Provides curb-side handle release. 3 3 3 3

Fifth Wheel Assembly FW0070 FW0100 FW0165 FW2080

(Top Plate) (XA-71) (XA-101) (XA-0116) (XA-2081)
3.5˝ Kingpin Lock 3 3 3 3
Air Release – Allows in-cab release of fifth wheel locking mechanism. 3 3
Fully Oscillating – Provides fore/aft and side-to-side articulation which
minimizes torque and twist transfer through the fifth wheel. Used Standard
Fifth Wheels
Severe Duty

where center of gravity is equal to or below fifth wheel height.

Oscillator Lockouts – Allows lock out of side-to-side articulation. 3
Kompensator® Lockouts – Allows lock out of the Kompensator®
feature to make the fifth wheel semi-oscillating when required. 3
Kompensator Dust Covers – For severe dusty/dirty environments.
®
3 3 3 3
Manual Secondary Lock – Provides additional security lock that is
manually disengaged and automatically engaged during uncoupling Standard Standard Standard Standard
and coupling.

Fifth Wheel Assembly FW35-03344 FW2870 FW28(9)00-X, FW28(9)00-5X

(Top Plate) (XA-351-03505) (XA-2801) (XA-2081)

Air Release – Allows in-cab release of fifth wheel locking mechanism. Standard Standard Standard
Terminal Tractor

Drilled and Tapped for Auto Lube – Provides a central point

3 3
Fifth Wheels

(manifold) of lubrication that distributes lubrication to all friction

points between tractor and trailer.
ELI (Electronic Lock Indicator) – Allows in-cab management
of the coupling process, via a coupling status display, as a 3
supplement to visual inspection and pull test procedure.
Manual Secondary Lock – Provides additional security lock that is
manually disengaged and automatically engaged during uncoupling Standard Standard Standard
and coupling.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 9

 THIS PAGE INTENTIONALLY LEFT BLANK

10 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

FIFTH WHEEL

TOP PLATE

MODELS

CONTENTS:

STANDARD, EXTRA CAPACITY, TERMINAL TRACTOR,

AND LIGHT COMMERCIAL DUTY MODELS

• CAPACITIES
• APPLICATIONS
• FEATURES
• AVAILABLE OPTIONS
• TOP PLATE PART NUMBERS
• TOP PLATE WEIGHTS
• AVAILABLE MOUNTING SYSTEMS
• TOP PLATE DIMENSIONS
• REBUILD AND REPLACEMENT KITS
Top Plate Models

FW35 Mounting Systems Available

For Complete Assembly Part Numbers refer to ˝Mounting System˝ pages.
NOTE: Height and Travel data is given in INCHES

STATIONARY STYLES HEIGHTS

STANDARD BASES
Foot Mount
Integrated Plate Mount
6, 7, 8, 9
Brackets Only
Brackets with Mounting Angles
No-Tilt BASES
Outboard Mount 8, 9
Inboard for Angle Mounting 8
Kompensator® BASES
Outboard Plate Mount 10, 12, 13
Capacity SLIDING STYLES HEIGHTS TRAVELS
55,000 lbs. Maximum Vertical Load
STANDARD BASES
150,000 lbs. Maximum Drawbar Pull
Outboard Mount 12, 24,
7, 8, 9, 10
Inboard Mount 36, 48
Applications No-Tilt BASES
Standard, Moderate, and Severe Duty Outboard Mount 6, 18,
9
Inboard for Angle Mounting 30, 42
Features Kompensator® BASES
• Cast Steel Construction
11, 17, 25,
• Forged, Machined, Heat-Treated Steel Lock Jaw Inboard for Angle Mounting 13
41, 54, 66
• Visible Lock Indicator
• Easy Infinite Lock Adjustment
• Automatic Secondary Lock
• Closed Loop Drop Handle
• NoLube™ Pocket Inserts
Dimensions
• Cast-In Grease Grooves
24.2˝
(614)
Warranty 18.2˝
(463)
• 6 Year/600,000 Mile Materials and Workmanship
• 6 Year/600,000 Mile Performance Guarantee 13.5˝
(343)
Options Available
• Right Hand Release Handle
• Air Release (Left Hand Release Only)
• Drilled and Tapped for Auto Lube 32.5˝
(826)
• Manual Secondary Release Handle
• Dolly Release Handle 19.0˝
(483)
• No-Tilt

40°
38.5˝
Top Plate Part Numbers (977)

DESCRIPTION PART NUMBER WEIGHT

Rebuild and Replacement Kits
Left Hand Release XA-351-A-L-P 226 lbs. DESCRIPTION RELEASE PART NUMBER
Right Hand Release XA-351-A-P 226 lbs.
Rebuild-Standard LH RK-351-A-L
For options, insert one of the following codes after the 6th digit.
Example: XA-351-A-86-L-P. For multiple option combinations, please contact Rebuild-Standard RH RK-351-A
Customer Service for applicable Option Code. Rebuild-w/Manual Secondary Release LH RK-351-A-02-L
Air Release – OEM Replacement (LH Only) Code 80 Rebuild-w/Manual Secondary Release RH RK-351-A-02
Air Release – New Installation (LH Only) Code 86
Rebuild-w/Air Release LH RK-351-A-80-L
Drilled and Tapped for Auto Lube Code 24
Lock Replacement Kit RK-351-07296
Manual Secondary Release Lock Code 02
Dolly Release Handle (LH Only) Code 28 Release Handle Replacement Kit LH/RH RK-08415-1
No-Tilt Stationary Code 06 Pocket Inserts - Pair RK-PKT-2
No-Tilt Slider – Change ˝A-˝ to ˝A1-˝ Code 06

12 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Top Plate Models

FW33 (LowLube) Mounting Systems Available

For Complete Assembly Part Numbers refer to ˝Mounting System˝ pages.
NOTE: Height and Travel data is given in INCHES

STATIONARY STYLES HEIGHTS

STANDARD BASES
Integrated Plate Mount 6, 7, 8, 9
No-Tilt BASES
Outboard Mount 8, 9
Inboard for Angle Mounting 8
Kompensator® BASES
Outboard Plate Mount 10, 12, 13
SLIDING STYLES HEIGHTS TRAVELS
STANDARD BASES
Outboard Mount 12, 24,
Capacity Inboard Mount
7, 8, 9, 10
36, 48
55,000 lbs. Maximum Vertical Load
No-Tilt BASES
150,000 lbs. Maximum Drawbar Pull
Outboard Mount 6, 18,
9
Inboard for Angle Mounting 30, 42
Applications Kompensator® BASES
Standard and Moderate Duty 11, 17, 25,
Inboard for Angle Mounting 13
41, 54, 66
Features
• Grease Fitting for Lock Lubrication
• Replaceable NoLube™ Plate Inserts
• NoLube™ Pocket Inserts
• Cast Steel Construction
• Forged, Machined, Heat-Treated Steel Lock Jaw
• Visible Lock Indicator
• Easy Infinite Lock Adjustment Dimensions
• Automatic Secondary Lock 23.7˝
• Closed Loop Drop Handle (614)
18.2˝
(463)
Warranty
13.4˝
• 6 Year/600,000 Mile Materials and Workmanship (352)
(2 Year/200,000 Miles on Lube Plates)
• 6 Year/600,000 Mile Performance Guarantee

Options Available 32.5˝

(826)
• Right Hand Release Handle
• Air Release (Left Hand Release Only) 19.0˝
• Manual Secondary Release Handle (484)

40°
38.5˝
(977)

Top Plate Part Numbers Rebuild and Replacement Kits

DESCRIPTION PART NUMBER WEIGHT DESCRIPTION RELEASE PART NUMBER
Left Hand Release XA-331-A-L-P 251 lbs. Rebuild-Standard LH RK-331-A-L
Right Hand Release XA-331-A-P 251 lbs. Rebuild-Standard RH RK-331-A
For options, insert one of the following codes after the 6th digit. Rebuild-w/Manual Secondary Release LH RK-331-A-02-L
Example: XA-331-A-86-L-P. For multiple option combinations, please contact
Customer Service for applicable Option Code.
Rebuild-w/Manual Secondary Release RH RK-331-A-02
Air Release – OEM Replacement (LH Only) Code 80 Rebuild-w/Air Release LH RK-331-A-80-L
Air Release – New Installation (LH Only) Code 86 Lock Replacement Kit RK-351-07296
Manual Secondary Release Lock Code 02 Release Handle Replacement Kit LH/RH RK-08415-1
Lube Plate Inserts–Pair RK-331-1
Pocket Inserts–Pair RK-PKT-2

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 13

Top Plate Models

FW31 (NoLube™) Mounting Systems Available

For Complete Assembly Part Numbers refer to ˝Mounting System˝ pages.
NOTE: Height and Travel data is given in INCHES

STATIONARY STYLES HEIGHTS

STANDARD BASES
Foot Mount
Integrated Plate Mount
6, 7, 8, 9
Brackets Only
Brackets with Mounting Angles
SLIDING STYLES HEIGHTS TRAVELS
STANDARD BASES
Outboard Mount 12, 24,
7, 8, 9, 10
Inboard Mount 36, 48

Capacity
55,000 lbs. Maximum Vertical Load
150,000 lbs. Maximum Drawbar Pull

Applications
Standard Duty
Features
• NoLube™ Coated Lock Components
• Replaceable NoLube™ Plate Inserts
• NoLube™ Pocket Inserts
• Cast Steel Construction
• Forged, Machined, Heat-Treated Steel Lock Jaw
• Visible Lock Indicator
• Easy Infinite Lock Adjustment Dimensions
• Automatic Secondary Lock 23.7˝
• Closed Loop Drop Handle (614)
18.2˝
(463)
Warranty
13.4˝
• 6 Year/600,000 Mile Materials and Workmanship (352)
(2 Year/200,000 Miles on Lube Plates)
• 6 Year/600,000 Mile Performance Guarantee

Options Available 32.5˝

(826)
• Right Hand Release Handle
• Air Release (Left Hand Release Only) 19.0˝
• Manual Secondary Release Handle (484)

40°
38.5˝
(977)

Top Plate Part Numbers Rebuild and Replacement Kits

DESCRIPTION PART NUMBER WEIGHT DESCRIPTION RELEASE PART NUMBER
Left Hand Release XA-311-A-L-P 251 lbs. Rebuild-Standard LH RK-311-A-L
Right Hand Release XA-311-A-P 251 lbs. Rebuild-Standard RH RK-311-A
For options, insert one of the following codes after the 6th digit. Rebuild-w/Manual Secondary Release LH RK-311-A-02-L
Example: XA-311-A-86-L-P. For multiple option combinations, please contact
Customer Service for applicable Option Code.
Rebuild-w/Manual Secondary Release RH RK-311-A-02
Air Release – OEM Replacement (LH Only) Code 80 Rebuild-w/Air Release LH RK-311-A-80-L
Air Release – New Installation (LH Only) Code 86 Lock Replacement Kit RK-351-07296
Manual Secondary Release Lock Code 02 Release Handle Replacement Kit LH/RH RK-08415-1
Lube Plate Inserts–Pair RK-331-1
Pocket Inserts–Pair RK-PKT-2

14 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Top Plate Models

FW17 Mounting Systems Available

For Complete Assembly Part Numbers refer to ˝Mounting System˝ pages.
NOTE: Height and Travel data is given in INCHES

STATIONARY STYLES HEIGHTS

Foot Mount
Integrated Plate Mount
6, 7, 8, 9
Brackets Only
Brackets with Mounting Angles
SLIDING STYLES HEIGHTS TRAVELS
Outboard Mount 12, 24,
7, 8, 9, 10
Inboard Mount 36, 48

Capacity
50,000 lbs. Maximum Vertical Load
150,000 lbs. Maximum Drawbar Pull

Applications
Standard Duty
Features
• Cast Steel Construction
• Forged Steel Lock Jaw
• Automatic Secondary Lock
• Closed Loop Drop Handle Dimensions
• NoLube™ Pocket Inserts
• Cast-In Grease Grooves 24.5˝
(622)
19.7˝
(501)

10.6˝
(269)
Warranty
• 5 Year/500,000 Mile Materials and Workmanship 25.8˝
• 5 Year/500,000 Mile Performance Guarantee (656)

15.2˝
Options Available (386)
• Drilled and Tapped for Auto Lube
• Air Release 40°
38.2˝
(971)

Top Plate Part Number Rebuild and Replacement Kits

DESCRIPTION PART NUMBER WEIGHT DESCRIPTION PART NUMBER
Left Hand Release XA-17-A-L-P 202 lbs. Rebuild – Standard RK-17-A-L
For options, insert the following code after the 5th digit. Rebuild – w/Air Release RK-17-A-80-L
Example: XA-17-A-80-L-P.
Air Cylinder Replacement Kit RK-171-10999
Air Release – OEM Replacement Code 80
Lock Jaw Replacement Kit RK-171-11078
Drilled and Tapped for Auto Lube Code 24
Release Handle Replacement Kit – Manual RK-171-11079
Release Handle Replacement Kit – Air RK-171-11384
Pocket Inserts – Pair RK-PKT-2

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 15

Top Plate Models

FW16 (LowLube) Mounting Systems Available

For Complete Assembly Part Numbers refer to ˝Mounting System˝ pages.
NOTE: Height and Travel data is given in INCHES

STATIONARY STYLES HEIGHTS

Integrated Plate Mount
Brackets Only 6, 7, 8, 9
Brackets with Mounting Angles
SLIDING STYLES HEIGHTS TRAVELS
Outboard Mount 12, 24,
7, 8, 9, 10
Inboard Mount 36, 48

Capacity
50,000 lbs. Maximum Vertical Load
150,000 lbs. Maximum Drawbar Pull

Applications
Standard Duty
Features
• Grease Fitting for Lock Lubrication
• Replaceable NoLube™ Plate Inserts
• Cast Steel Construction
• Forged Steel Lock Jaw Dimensions
• Automatic Secondary Lock
• Closed Loop Drop Handle 24.4˝
• NoLube™ Pocket Inserts (619)
20.3˝
(517)

11.0˝
(280)
Warranty
• 5 Year/500,000 Mile Materials and Workmanship 26.2˝
(2 Year/200,000 Miles on Lube Plates) (666)
• 5 Year/500,000 Mile Performance Guarantee
15.2˝
Options Available (386)
• Right Hand Release Handle
• Air Release (Left Hand Release Only) 40°
38.0˝
(964)

Top Plate Part Number Rebuild and Replacement Kits

DESCRIPTION PART NUMBER WEIGHT DESCRIPTION PART NUMBER
Left Hand Release XA-16-A-L-P 198 lbs. Rebuild – Standard RK-161-A
Right Hand Release XA-16-A-P 198 lbs. Rebuild – w/Air Release RK-161-A-80-L
For options, insert the following code after the 5th digit. Air Cylinder Replacement Kit RK-161-10999
Example: XA-16-A-80-L-P Lock Jaw Replacement Kit RK-161-11078
Air Release – OEM Replacement Code 80 Release Handle Replacement Kit – Manual RK-161-11493
Release Handle Replacement Kit – Air RK-161-11384
Lube Plate Inserts – Pair RK-161-1
Lubrication Tube RK-161-11774
Pocket Inserts – Pair RK-PKT-2

16 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Top Plate Models

FWAL (Aluminum LowLube) Mounting Systems Available

For Complete Assembly Part Numbers refer to ˝Mounting System˝ pages.
NOTE: Height and Travel data is given in INCHES

STATIONARY STYLES HEIGHTS

Foot Mount
Integrated Plate Mount
6, 7, 8, 9
Brackets Only
Brackets with Mounting Angles
SLIDING STYLES HEIGHTS TRAVELS
Outboard Mount 12, 24,
7, 8, 9, 10
Inboard Mount 36, 48

Capacity
55,000 lbs. Maximum Vertical Load
150,000 lbs. Maximum Drawbar Pull

Applications
Standard Duty
Features
• World’s Lightest Weight Top Plate
• Alcoa Forged Aluminum Construction
• Replaceable NoLube™ Plate Inserts
• NoLube™ Pocket Inserts Dimensions
• Forged Steel Lock Jaw
21.9˝
• Automatic Secondary Lock (558)
• Closed Loop Drop Handle
17.8˝
(454)

13.5˝
(343)
Warranty
• 5 Year/500,000 Mile Materials and Workmanship
(2 Year/200,000 Miles on Lube Plates)
30.5˝
• 5 Year/500,000 Mile Performance Guarantee (774)

17.0˝
(431)

40°
38.7˝
(984)

Top Plate Part Number Rebuild and Replacement Kits

DESCRIPTION PART NUMBER WEIGHT DESCRIPTION PART NUMBER
Left Hand Release XA-AL-A-L-P 157 lbs. Rebuild RK-AL-A-L
For options, insert the following code after the 5th digit. Rebuild – w/Air Release RK-AL-A-80-L
Example: XA-AL-A-80-L-P
Air Cylinder Replacement Kit RK-AL-10999
Air Release – OEM Replacement Code 80 Lock Replacement Kit RK-AL-11078
Release Handle Replacement Kit RK-10495-AL-P
Release Handle Replacement Kit – Air RK-AL-11384
Lube Plate Inserts – Pair RK-331-1
Pocket Inserts – Pair RK-PKT-3

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 17

Top Plate Models – Severe Duty

FW0070 Mounting Systems Available

For Complete Assembly Part Numbers refer to ˝Mounting System˝ pages.
NOTE: Height and Travel data is given in INCHES

STATIONARY STYLES HEIGHTS

STANDARD BASES
Foot Mount
Integrated Plate Mount
7, 8, 9
Brackets Only
Brackets with Mounting Angles
KOMPENSATOR BASES
Outboard Mount 10, 12, 13
SLIDING STYLES HEIGHTS TRAVELS
STANDARD BASES
11, 17, 25,
Capacity Inboard for Angle Mounting 8, 9
41, 54, 66
70,000 lbs. Maximum Vertical Load
KOMPENSATOR BASES
200,000 lbs. Maximum Drawbar Pull (Stationary Mount)
11, 17, 25,
150,000 lbs. Maximum Drawbar Pull (Sliding Mount) Inboard for Angle Mounting 13
41, 54, 66
Applications
Moderate and Severe Duty
Features
• Cast Steel Construction
• Forged, Machined, Heat-Treated Steel Lock Jaw
• Easy Infinite Lock Adjustment Dimensions
• Manual Secondary Lock 20.8˝
• Cast-In Grease Grooves (528
15.13˝
(390)

13.5˝
(342)

Warranty 31.5˝
• 5 Year/500,000 Mile Materials and Workmanship (800)

18.0˝
(457)

Options Available
• 3.5˝ Kingpin Lock 40°
39.2˝
(996)

Top Plate Part Numbers Rebuild and Replacement Kits

KINGPIN KINGPIN PART
DESCRIPTION PART NUMBER WEIGHT DESCRIPTION
LOCK LOCK NUMBER
Left Hand Release XA-71-DAP 2˝ 316 lbs. Rebuild 2˝ RK-65014
Left Hand Release XA-71-OAP 3.5˝ 316 lbs. Rebuild
2˝ RK-65014-1
(FW2570-7103*, FW2570-7450*)
Rebuild 3.5˝ RK-65015
Rebuild
3.5˝ RK-65015-1
(FW2570-7103*, FW2570-7450*)
Lock Replacement Kit 2˝ RK-65024
Lock Replacement Kit 3.5˝ RK-65024-1
Secondary Lock Replacement Kit RK-65025
Release Handle Replacement Kit XA-1117-H
Release Handle Replacement Kit
XA-03715
(FW2570-7103*, FW2570-7450*)

18 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Top Plate Models – Severe Duty

FW0100/FW0165 Mounting Systems Available

NOTE: Height data is given in INCHES

FIFTH WHEEL ASSEMBLY HEIGHT WEIGHT

MODEL NUMBER
STATIONARY WITH MOUNTING BASE (1)
FW0100-DC 9 590 lbs.
FW0100-D 11 595 lbs.
STATIONARY WITH MOUNTING BASE (2)
FW0165-0091-1 11 650 lbs.

(1) For 3.5˝ Kingpin Lock, replace D (7th digit) in part

number with O. For Air Release, add U to end of
part number. Add 10 lbs. to weight.
(2) For 3.5˝ Kingpin Lock, on FW0165, drop -1 at end of
Capacity part number.
100,000 lbs. Maximum Vertical Load (FW0100 )
165,000 lbs. Maximum Vertical Load (FW0165)
200,000 lbs. Maximum Drawbar Pull

Applications
Severe Duty
Features
• Cast Steel Construction
• Forged, Machined, Heat-Treated Steel Lock Jaw
• Easy Infinite Lock Adjustment
• Manual Secondary Lock
Dimensions
• Cast-In Grease Grooves 20.2˝
(513)
16.7˝
(424)

13.5˝
(344)

Warranty 33.5˝
(800)
• 5 Year/500,000 Mile Materials and Workmanship
20.0˝
(508)

Options Available
• 3.5˝ Kingpin Lock
40°
36.0˝
(914)

Top Plate Part Numbers Rebuild and Replacement Kits

KINGPIN KINGPIN PART
DESCRIPTION PART NUMBER WEIGHT DESCRIPTION
LOCK LOCK NUMBER
FW0100 XA-101-DAS 2˝ 350 lbs. Rebuild-Standard 2˝ RK-65012-1
FW0100 XA-101-OAS 3.5˝ 350 lbs. Rebuild-Standard 3.5˝ RK-65013-1
FW0165 XA-0116-1S 2˝ 471 lbs. Lock Replacement Kit 2˝ RK-65024
FW0165 XA-0116S 3.5˝ 471 lbs. Lock Replacement Kit 3.5˝ RK-65024-1
Secondary Lock Kit Replacement Kit RK-65025
Release Handle Replacement Kit XA-1117-13

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 19

Top Plate Models – Severe Duty / Fully Oscillating

FW2080 Mounting Systems Available

NOTE: Height data is given in INCHES

FIFTH WHEEL ASSEMBLY HEIGHT WEIGHT

MODEL NUMBER
STATIONARY WITH MOUNTING BASE (1)
FW2080-D 14 860 lbs.

(1) For 3.5˝ Kingpin Lock Option, replace D at the end of

the part number with O.
For Air Release, add U to end of part number. Add
3 lbs. to weight.
For Oscillator Lockout Option, replace D at the end of
the part number with 0778-1 (2˝ Kingpin Lock) or 0778
(3.5˝ Kingpin Lock). Add 10 lbs. to weight.
Capacity
70,000 lbs. Maximum Vertical Load
200,000 lbs. Maximum Drawbar Pull

Applications
Moderate and Severe Duty
Only Used Where Loaded Center of Gravity of
Trailer is Equal to or Below Fifth Wheel Height

Features
• Fully Oscillating
• Cast Steel Construction Dimensions
• Forged, Machined, Heat-Treated Steel Lock Jaw 19.9˝
• Easy Infinite Lock Adjustment (506)
• Manual Secondary Lock 16.4˝
(417)
• Cast-In Grease Grooves

13.5˝
(345)
35.3˝
(851)
Warranty
• 5 Year/500,000 Mile Materials and Workmanship

19.9˝
(506)
Options Available
• 3.5˝ Kingpin Lock
• Oscillator Lockouts
45°
36.0˝
(914)

Top Plate Part Numbers Rebuild and Replacement Kits

KINGPIN KINGPIN PART
DESCRIPTION PART NUMBER WEIGHT DESCRIPTION
LOCK LOCK NUMBER
Left Hand Release XA-2081-DAS 2˝ 420 lbs. Rebuild-Standard 2˝ RK-65012
Left Hand Release XA-2081-OAS 3.5˝ 420 lbs. Rebuild-Standard 3.5˝ RK-65013
For option, insert the following code before the “S” at the end of the part Rebuild w/Air Release 2˝ RK-65012-2
number: Example: XA-2081-DAUS. Rebuild w/Air Release 3.5˝ RK-10844
Air Release Code U Lock Replacement Kit 2˝ RK-65024
Lock Replacement Kit 3.5˝ RK-65024-1
Secondary Lock Replacement Kit RK-65025
Release Handle Replacement Kit XA-1117-13

20 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Top Plate Models – Terminal Tractor

FW35-03344 Mounting Systems Available

NOTE: Height data is given in INCHES

FIFTH WHEEL ASSEMBLY HEIGHT WEIGHT

MODEL NUMBER
STATIONARY BRACKETS (1)
FW35-03344 8 293 lbs.
FW35-03344-1 10 298 lbs.

(1) For Drilled and Tapped for Auto Lube Option,

add-2 at end of part number (8˝ Height) or replace -1
at end of part number (10˝ Height) with -3.
For multiple option combinations, please contact
Customer Service for the applicable Option Code.

Capacity
70,000 lbs. Maximum Vertical Load

Applications
Standard Duty
Features
• Cast Steel Construction
• Forged, Machined, Heat-Treated Steel Lock Jaw
• Hardened Steel Pocket Inserts
• Air Release Dimensions
• Manual Secondary Lock
• Cast-In Grease Grooves

13.5˝
(343)

Warranty
• 1 Year Materials and Workmanship
32.5˝
(826)

Options Available 19.0˝

(483)
• Drilled and Tapped for Auto Lube
• Various Air Cylinder Fittings

35.1˝
(892)

Top Plate Part Numbers Rebuild and Replacement Kits

DESCRIPTION WEIGHT DESCRIPTION PART NUMBER
XA-351-03505S 252 lbs. Rebuild RK-351-03505
For options, replace the ˝S˝ at the end of the part number with one of the Lock Replacement Kit RK-351-08332-1
following codes: Example: XA-351-03505-2S
Drilled and Tapped for Auto Lube Code 2S

For additional air fitting options or multiple option combinations, please

contact Customer Service for the applicable Option Code.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 21

Top Plate Models – Terminal Tractor

FW2870 Mounting Systems Available

NOTE: Height data is given in INCHES

FIFTH WHEEL ASSEMBLY HEIGHT WEIGHT

MODEL NUMBER
STATIONARY BRACKETS (1)
FW2870-03184 8 390 lbs.

(1) For Drilled and Tapped for Auto Lube Option,

add-2 at end of part number.
For additional air fitting options or multiple option
combinations, please contact Customer Service for the
applicable Option Code.

Capacity
100,000 lbs. Maximum Vertical Load

Applications
Moderate and Severe Duty
Features
• Fabricated Steel Construction
• Forged, Machined, Heat-Treated Steel Lock Jaw
• Air Release
• Manual Secondary Lock Dimensions
• Machined Grease Grooves

13.5˝
(344)
32.3˝
Warranty (822)

• 180 Day Materials and Workmanship

Options Available 18.8˝

(478)
• Drilled and Tapped for Auto Lube
• Various Air Cylinder Fittings

36.0˝
(914)

Top Plate Part Numbers Rebuild and Replacement Kits

DESCRIPTION WEIGHT DESCRIPTION PART NUMBER
XA-2801-03185-1S 305 lbs. Rebuild RK-03185-1
For option, replace the ˝1S˝ at the end of the part number: Lock Replacement Kit RK-63504
Example: XA-2801-03185-2S.
Drilled and Tapped for Auto Lube Code 2S
For additional air fitting options or multiple option combinations, please
contact Customer Service for the applicable Option Code.

22 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Top Plate Models – Terminal Tractor / Elevating

FW2800/2900 Mounting Systems Available

NOTE: Height data is given in INCHES

FIFTH WHEEL ASSEMBLY HEIGHT WEIGHT

MODEL NUMBER
SINGLE CYLINDER (1)
FW2900-X 10-24 1524 lbs.
FW2800-X 10-29 1662 lbs.
TWIN CYLINDER
FW2900-5X 11-26 1920 lbs.
FW2800-5X 12-30 2105 lbs.

(1) For Lock Down Option, add -87 to the end of the
part number. Add 56 lbs. to weight.
Capacity Hydraulic Lift Accessories Available
50,000 lbs. Maximum Vertical Lift (Single Cylinder) • Gear Pump and Hydraulic Control Valve (Single
100,000 lbs. Maximum Vertical Lift (Twin Cylinder) Cylinder) – RK-2800-11G
• Hydraulic Gear Pump, Control Valve and Flange Kit
(Twin Cylinder) – RK-2800-41-G
Applications • Hose and Fittings (Single Cylinder) – RK-2800-20-G
Standard, Moderate, and Severe Duty • Hose and Fittings (Twin Cylinder) – RK-2800-30-G
Features • Air Operated Lift Control (Single and Twin Cylinder) –
RK-2800-50
Top Plate
• Fabricated Steel Top Construction
• Forged, Machined, Heat-Treated Steel Lock Jaw
• Air Release
• Manual Secondary Lock
• Machined Grease Grooves Dimensions
Hydraulic Lift Mechanism
• 8˝ I.D. Double Action Hydraulic Cylinders
• P.T.O. Ratio of 1:1 recommended for all units; 13.5˝
(344)
100% of Engine RPM
32.3˝
• 17 GPM (at 1300 rpm) Pump-Single Cylinder (822)
• 20 GPM (at 1300 rpm) Pump-Twin Cylinder
• 1800 PSI Maximum

Warranty
• 180 Day Materials and Workmanship
18.8˝
(478)
Options Available
• Lock Down, Single Cylinder
(For frequent over-the-road usage on public streets 36.0˝
or highways.) (914)

Top Plate Part Numbers Rebuild and Replacement Kits

DESCRIPTION WEIGHT DESCRIPTION PART NUMBER
XA-2801-AX-1S 300 lbs. Rebuild RK-65021-2
Lock Replacement Kit RK-63504

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 23

Top Plate Models – Light Commercial

FW6000 Mounting Systems Available

NOTE: Height data is given in INCHES
FW-6000
FIFTH WHEEL ASSEMBLY HEIGHT WEIGHT
MODEL NUMBER
FOOT MOUNT
FW6000 5 119 lbs.
WITH ADJUSTABLE MOUNTING BOX
FW6000-10 Adjustable 255 lbs.
WITH MOUNTING PLATE
FW6000-20 6 222 lbs.

FW-6000-10
Dimensions
18.0˝
(457)
13.3˝
(340)

13.9˝
(353)
28.0˝
(711)

14.0˝
FW-6000-20 (357)

45°

22.5˝
(571)

Rebuild and Replacement Kits

DESCRIPTION PART NUMBER
Rebuild RK-63512
Release Handle Replacement Kit RK-6003

Capacity Kingpin Accessories

12,000 lbs. Maximum Vertical Load
32,000 lbs. Maximum Gross Trailer Weight

Applications
Light Commercial

Warranty
• 2 Year Materials and Workmanship
KP-6500

2˝ Kingpin, Box Mounted for Welding to Trailer Frame

Top Plate Part Number 6˝ Height Adjustment in 2˝ increments from 13.62˝ to 19.62˝
DESCRIPTION WEIGHT
XA-6001-AS 90 lbs.

24 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Top Plate Models – Light Commercial

FW0001/FW0002 Mounting Systems Available

FW0001
FIFTH WHEEL ASSEMBLY GOOSENECK
MODEL NUMBER TUBE SIZE WEIGHT
TUBE TYPE GOOSENECK AND
BOX TYPE GOOSENECK INSTALLATIONS
FW0001 NA 60 lbs.
DOUBLE AXIS TUBE TYPE GOOSENECK AND
BOX TYPE GOOSENECK INSTALLATIONS
FW0002-35 3.5˝ 68 lbs.
FW0002-40 4.0˝ 68 lbs.
FW0002-45 4.5˝ 68 lbs.

Dimensions
11.2˝
(284)

FW0002

9.1˝
(233)

4.34˝
(110)

12.0˝
(304)

Rebuild and Replacement Kit

DESCRIPTION PART NUMBER
Capacity Lock Jaw Replacement Kit BFW0174
8,000 lbs. Maximum Vertical Load
32,000 lbs. Maximum Gross Trailer Weight
Kingpin Accessories
Applications
Light Commercial
Features
• Safety Lock Handle
• Ductile Iron Locking Block
• Ductile Iron Cast Split Locks

Warranty
• 2 Year Materials and Workmanship

KP-0030
Top Plate Part Number
Bed mounted, retractable kingpin.
DESCRIPTION WEIGHT
FW0005-10 43 lbs.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 25

 THIS PAGE INTENTIONALLY LEFT BLANK

26 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

FIFTH WHEEL

MOUNTING

SYSTEMS

CONTENTS:

STATIONARY, SLIDING, NO-TILT, AND Kompensator® MOUNTS

• APPLICATIONS
• FEATURES
• MOUNTING SYSTEM DIMENSIONS
• FIFTH WHEEL ASSEMBLY PART NUMBERS
• FIFTH WHEEL ASSEMBLY WEIGHTS
Mounting Systems / Stationary Mounts

Foot Mount Part Numbers

FIFTH WHEEL ASSEMBLY WEIGHT
HEIGHT
MODEL NUMBER (1) (2) (3) (4)
FW__Y600XL00 6˝ 227 lbs.
FW__Y700XL00 7˝ 233 lbs.
FW__Y800XL00 8˝ 238 lbs.
FW__Y900XL00 9˝ 243 lbs.

(1) __ = One of the following two digit top plate model

numbers: 17, 31, 35, AL
(2) For Right Hand (curb-side) Release Handle, replace L
(10th digit) in part number with R. Right hand release
available on FW31 and FW35.
(3) For options, replace the 00 at the end of the part
number with the appropriate two digit code. For
Applications multiple option combinations, please contact Customer
Bolt-On Corrugated or Flat Plate Mount Applications* Service for the applicable Option Code.
Fifth Wheels: FW17, FW31, FW35, FWAL • Air Release – Available on FW17, FW31, FW35
* A flat or corrugated mounting plate is required for foot and FWAL – Option Code-80
mount brackets. Refer to Fifth Wheel Installation Manual • Manual Secondary Lock – Available on FW31
(XL-FW10008IM) for mounting plate specifications. and FW35 – Option Code-02
• Drilled and Tapped for Auto Lube –Available on
FW17 and FW35 – Option Code-24
Features
• Left Hand Dolly Release Handle – Available on
• 3/8˝ Bracket Base designed for more clearance and
FW35 – Option Code-28
ease of installation when using corrugated mounting
• Corrugated Mounting Plate – Available on
plates.
FW31 and FW35 – Option Code-01
• Cast Steel Construction
• Integral Tilt Stops (4) Weights shown are for FWAL (add 6 lbs. for air release).
• Two-Piece Side Cushioning ˝Up Shock˝ Bushings Add the following based on top plate model:

FIFTH WHEEL MANUAL AIR

Dimensions
MODEL RELEASE RELEASE
FW17 45 lbs. 51 lbs.
FW31 94 lbs. 98 lbs.
FW35 69 lbs. 73 lbs.

Weights include mounting brackets only, and do not include

weight of mounting plate.
Add 115 lbs. for Corrugated Mounting Plate Option Code-01.
1.0˝
(25)

6.5˝
(165)
8.5˝
(215)

8.0˝ .6˝ 1.0˝

(203) (17) TYP. (26) TYP.
16.0˝
(406) 18.0˝
(457)

28 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Mounting Systems / Stationary Mounts

Integrated Plate Mount Part Numbers

FIFTH WHEEL ASSEMBLY WEIGHT
HEIGHT
MODEL NUMBER (1) (2) (3) (4)
FW__Z600XL00 6˝ 243 lbs.
FW__Z700XL00 7˝ 251 lbs.
FW__Z800XL00 8˝ 258 lbs.
FW__Z900XL00 9˝ 254 lbs.
(1) __ = One of the following two digit top plate model
numbers: 17, 16, 31, 33, 35, AL.
(2) For Right Hand (curb-side) Release Handle, replace L
(10th digit) in part number with R. Right hand release
available on FW16, FW31, FW33 and FW35.
(3) For options, replace the 00 at the end of the part
number with the appropriate two digit code. For
Applications multiple option combinations, please contact Customer
Bolt-On Outboard Angle Applications Service for the applicable Option Code.
Fifth Wheels: FW17, FW16, FW31, FW33, FW35, FWAL • Air Release – Available on FW16, FW17, FW31,
FW33, FW35 and FWAL – Option Code-80
• Manual Secondary Lock – Available on FW31,
Features FW33 and FW35 – Option Code-02
• Lightweight 5/16˝ Plate Base • Drilled and Tapped for Auto Lube – Available
• Fabricated Steel Construction on FW17 and FW35 – Option Code-24
• Forged Steel Cap • Left Hand Dolly Release Handle – Available on
• Nylon Lined ˝Up-Shock˝ Bushing FW33 and FW35 – Option Code-28
(4) Weights shown are for FWAL (add 6 lbs. for air release).
Add the following based on top plate model:

FIFTH WHEEL MANUAL AIR

Dimensions
MODEL RELEASE RELEASE
40.0˝ FW17 45 lbs. 51 lbs.
(1016)
1.3˝ FW16 41 lbs. 47 lbs.
37.2˝ (34) FW31 94 lbs. 98 lbs.
(946)
FW33 94 lbs. 98 lbs.
4.0˝ TYP
(101) FW35 69 lbs. 73 lbs.

18.5˝
(469)

10 x 8.5˝
(ѫ17)

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 29

Mounting Systems – Stationary Mounts

Bracket for Angle Mounting Part Numbers

FIFTH WHEEL ASSEMBLY WEIGHT
HEIGHT
MODEL NUMBER (1) (2) (3) (4)
FW__X600XL00 6˝ 198 lbs.
FW__X700XL00 7˝ 204 lbs.
FW__X800XL00 8˝ 209 lbs.
FW__X900XL00 9˝ 214 lbs.

(1) __ = One of the following two digit top plate model

numbers: 17, 16, 31, 35, AL
(2) For Right Hand (curb-side) Release Handle, replace L
(10th digit) in part number with R. Right hand release
available on FW16, FW31 and FW35.
(3) For options, replace the 00 at the end of the part
number with the appropriate two digit code. For
Applications multiple option combinations, please contact Customer
Welded Over-the-Frame Angle Applications Service for the applicable Option Code.
Fifth Wheels: FW17, FW16, FW31, FW35, FWAL • Air Release – Available on FW16, FW17, FW31,
FW35, and FWAL – Option Code-80
• Manual Secondary Lock – Available on FW31
Features and FW35 – Option Code-02
• Cast Steel Construction • Drilled and Tapped for Auto Lube – Available
• Integral Tilt Stop on FW17 and FW35 – Option Code-24
• Two-Piece Side Cushioning ˝Up Shock˝ Bushings • Left Hand Dolly Release Handle – Available on
FW35 – Option Code-28
(4) Weights shown are for FWAL (add 6 lbs. for air release).
Add the following based on top plate model:

FIFTH WHEEL MANUAL AIR

Dimensions MODEL RELEASE RELEASE
FW17 45 lbs. 51 lbs.
FW16 41 lbs. 47 lbs.
FW31 94 lbs. 98 lbs.
FW35 69 lbs. 73 lbs.

3.75”
8” (95)
16.0” (203) 4.5”
(406) (114)

30 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Mounting Systems – Stationary Mounts

Bracket with Angle Mount Part Numbers

FIFTH WHEEL ASSEMBLY WEIGHT
HEIGHT
MODEL NUMBER (1) (2) (3) (5)
FW__W600GL00 6˝ 256 lbs.
FW__W700GL00 7˝ 262 lbs.
FW__W800GL00 8˝ 267 lbs.
FW__W900GL00 9˝ 272 lbs.
(1) __ = One of the following two digit top plate model
numbers: 17, 16, 31, 35, AL(2)
For Right Hand (curb-side) Release Handle, replace L
(10th digit) in part number with R. Right hand release
available on FW16, FW31 and FW35.
(3) For Frame Width, replace G (34.00˝ Frame Width)
(9th digit) in part number with appropriate code from
Applications table below.
Over-the-Frame Angle Applications
Fifth Wheels: FW17, FW16, FW31, FW35, FWAL FRAME FRAME FRAME
WIDTH CODE WIDTH CODE WIDTH CODE
33.25˝ A 33.75˝ E 34.25˝ J
Features 33.38˝ B 33.88˝ F 34.38˝ K
• Cast Steel Construction 33.50˝ C 34.00˝ G 34.50˝ L
• Integral Tilt Stop 33.62˝ D 34.12˝ H
• Two-Piece Side Cushioning ˝Up Shock˝ Bushings
(4) For options, replace the 00 at the end of the part
• 4˝ x 4˝ x.38˝ x 36˝ Length Mounting Angle Standard
number with the appropriate two digit code. For
multiple option combinations, please contact Customer
Service for the applicable Option Code.
• Air Release – Available on FW16, FW17, FW31,
FW35, and FWAL – Option Code-80
• Manual Secondary Lock – Available on FW31
Dimensions and FW35 – Option Code-02
18.0˝
• Drilled and Tapped for Auto Lube – Available
(457) on FW17 and FW35 – Option Code-24
• Left Hand Dolly Release Handle – Available on
FW35 – Option Code-28
(5) Weights shown are for FWAL (add 6 lbs. for air release).
Add the following based on top plate model:

FIFTH WHEEL MANUAL AIR

36.0˝ 4.5˝ MODEL RELEASE RELEASE
(914) (114)
FW17 45 lbs. 51 lbs.
FW16 41 lbs. 47 lbs.
FW31 94 lbs. 98 lbs.
FW35 69 lbs. 73 lbs.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 31

Mounting Systems – Sliding Mounts

ILS™ Outboard Mount Part Numbers

FIFTH WHEEL
ASSEMBLY
HEIGHT TRAVEL WEIGHT
MODEL NUMBER
(4)
(1) (2) (3)
FW__A712XL00 7˝ 12˝ 345 lbs.
FW__A724XL00 7˝ 24˝ 378 lbs.
FW__A736XL00 7˝ 36˝ 412 lbs.
FW__A748XL00 7˝ 48˝ 445 lbs.
FW__A812XL00 8˝ 12˝ 349 lbs.
FW__A824XL00 8˝ 24˝ 383 lbs.
FW__A836XL00 8˝ 36˝ 417 lbs.
FW__A848XL00 8˝ 48˝ 450 lbs.
FW__A912XL00 9˝ 12˝ 353 lbs.
FW__A924XL00 9˝ 24˝ 387 lbs.
Applications
FW__A936XL00 9˝ 36˝ 420 lbs.
Bolt-on Outboard Angle Applications
FW__A948XL00 9˝ 48˝ 454 lbs.
Fifth Wheels: FW17, FW16, FW31, FW33, FW35, FWAL
Standard and Moderate Duty FW__A012XL00 10˝ 12˝ 365 lbs.
FW__A024XL00 10˝ 24˝ 399 lbs.
Features FW__A036XL00 10˝ 36˝ 432 lbs.
• Low Weight FW__A048XL00 10˝ 48˝ 466 lbs/
• Single-Piece, Bolt-On Cast Bracket
NOTE: 10˝ height ILS sliders available June 2015
• Two-Piece Side Cushioning ˝Upshock˝ Bushings
• Slide-On (No Weld), Repositionable Bulk Head (1) __ = One of the following two digit top plate model
Fitting Bracket numbers: 17, 16, 31, 33, 35, AL
• Same Air Cylinder Location on All Heights, including (2) For Right Hand (curb-side) Release Handle, replace L
˝Quick-Connect˝ Fittings (10th digit) in part number with R. Right hand release
• 2˝ Slide Increments available on FW16, FW31, FW33 and FW35.
• Universal ˝Tie Plate˝
(3) For options, replace the 00 at the end of the part
Dimensions number with the appropriate two digit code. For
multiple option combinations, please contact Customer
4.0˝ 1.5˝ Service for the applicable Option Code.
(102) TYP (38) .6˝
(17) • Air Release – Available on FW16, FW17, FW31,
FW33, FW35, and FWAL – Option Code-80
• Manual Secondary Lock – Available on FW31,
FW33 and FW35 – Option Code-02
• Drilled and Tapped for Auto Lube – Available
37.2˝ on FW17 and FW35 – Option Code-24
(946) • Left Hand Dolly Release Handle – Available on
FW33 and FW35 – Option Code-28
(4) Weights shown are for FWAL (add 6 lbs. for air release).
Add the following based on top plate model:

FIFTH WHEEL MANUAL AIR

MODEL RELEASE RELEASE
REAR “A” TRAVEL “B” FRONT FW17 45 lbs. 51 lbs.
“C” FW16 41 lbs. 47 lbs.
FW31 94 lbs. 98 lbs.
FW33 94 lbs. 98 lbs.
PART TOTAL FW35 69 lbs. 73 lbs.
TRAVEL A B C
NUMBER HOLES
*12X* 12˝ 9.75˝ 9.25˝ 31˝ 16
*24X* 24˝ 9.75˝ 9.25˝ 43˝ 22
*36X* 36˝ 9.75˝ 9.25˝ 55 28
*48X* 48˝ 9.75˝ 9.25˝ 67˝ 34

32 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Mounting Systems – Sliding Mounts

ILS™ Inboard Mount Part Numbers

(Over-the-Frame) FIFTH WHEEL
ASSEMBLY
HEIGHT TRAVEL WEIGHT
MODEL NUMBER
(4)
(1) (2) (3)
FW__B712XL00 7˝ 12˝ 330 lbs.
FW__B724XL00 7˝ 24˝ 358 lbs.
FW__B736XL00 7˝ 36˝ 386 lbs.
FW__B748XL00 7˝ 48˝ 414 lbs.
FW__B812XL00 8˝ 12˝ 335 lbs.
FW__B824XL00 8˝ 24˝ 363 lbs.
FW__B836XL00 8˝ 36˝ 391 lbs.
FW__B848XL00 8˝ 48˝ 419 lbs.
FW__B912XL00 9˝ 12˝ 339 lbs.
FW__B924XL00 9˝ 24˝ 367 lbs.
Applications FW__B936XL00 9˝ 36˝ 395 lbs.
Over-the-Frame Mount Applications
FW__B948XL00 9˝ 48˝ 423 lbs.
Fifth Wheels: FW17, FW16, FW31, FW33, FW35, FWAL
FW__B012XL00 10˝ 12˝ 351 lbs.
Standard and Moderate Duty
FW__B024XL00 10˝ 24˝ 379 lbs.
Features FW__B036XL00 10˝ 36˝ 407 lbs.
• Low Weight FW__B048XL00 10˝ 48˝ 435 lbs.
• Single-Piece, Bolt-On Cast Bracket
NOTE: 10˝ height ILS sliders available June 2015
• Two-Piece Side Cushioning ˝Upshock˝ Bushings
• Slide-On (No Weld), Repositionable Bulk Head (1) __ = One of the following two digit top plate model
Fitting Bracket numbers: 17, 16, 31, 33, 35, AL
• Same Air Cylinder Location on All Heights, including (2) For Right Hand (curb-side) Release Handle, replace L
˝Quick-Connect˝ Fittings (10th digit) in part number with R. Right hand release
• 2˝ Slide Increments available on FW16, FW31, FW33 and FW35.
• Universal ˝Tie Plate˝
(3) For options, replace the 00 at the end of the part
Dimensions number with the appropriate two digit code. For
multiple option combinations, please contact Customer
Service for the applicable Option Code.
• Air Release – Available on FW16, FW17, FW31,
FW35, and FWAL – Option Code-80
• Manual Secondary Lock – Available on FW31,
FW33 and FW35 – Option Code-02
35.5” • Drilled and Tapped for Auto Lube – Available
(901) on FW17 and FW35 – Option Code-24
• Left Hand Dolly Release Handle – Available on
FW33 and FW35 – Option Code-28
(4) Weights shown are for FWAL (add 6 lbs. for air release).
Add the following based on top plate model:

FIFTH WHEEL MANUAL AIR

MODEL RELEASE RELEASE
REAR “A” TRAVEL “B” FRONT FW17 45 lbs. 51 lbs.
FW16 41 lbs. 47 lbs.
“C”
FW31 94 lbs. 98 lbs.
FW33 94 lbs. 98 lbs.
PART NUMBER TRAVEL A B C FW35 69 lbs. 73 lbs.
*12X* 12˝ 9.75˝ 9.25˝ 31˝
*24X* 24˝ 9.75˝ 9.25˝ 43˝
*36X* 36˝ 9.75˝ 9.25˝ 55˝
*48X* 48˝ 9.75˝ 9.25˝ 67˝

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 33

Mounting Systems – FW0070 Stationary Mounts

Foot Mount Integrated Plate Mount

Applications Applications
Bolt-On Corrugated or Flat Plate Mount Applications* Bolt-On Outboard Angle Applications
* A flat or corrugated mounting plate is required for foot
mount brackets.
Features Features
• 3/8˝ Bracket Base designed for more clearance and • 1/2˝ Base Plate
ease of installation when using corrugated mounting
plates.
Dimensions Dimensions
1.0˝
(25) 40.0˝ 1.3˝
37.5˝ (1016) (34)
(946) 1.3˝
6.5˝ (33)
(165)
8.5˝
(215) 4.0˝
(101)

26.6˝
8.0˝ .6˝ 1.0˝ (676)
(203) (17) TYP. (26) TYP.
16.0˝
(406) 18.0˝
(457)
14 x ∅.6˝
(17)
Part Numbers Part Numbers
FIFTH WHEEL ASSEMBLY FIFTH WHEEL ASSEMBLY
HEIGHT WEIGHT (2) HEIGHT WEIGHT
MODEL NUMBER (1) MODEL NUMBER (1)
FW0070-7603XL 7˝ 412 lbs. FW0070-7685XL 7˝ 533 lbs.
FW0070-7602XL 8˝ 419 lbs. FW0070-7684XL 8˝ 539 lbs.
FW0070-7601XL 9˝ 421 lbs. FW0070-7683XL 9˝ 542 lbs.
(1) For options, add the following to the end of (1) For options, add the following to the end of
the part number. For multiple option combinations, the part number. For multiple option combinations,
please contact Customer Service for the applicable please contact Customer Service for the applicable
Option Code. Option Code.
• 3.5˝ Kingpin Lock – Option Code-03 • 3.5˝ Kingpin Lock – Option Code-03
• Corrugated Mounting Plate – Option Code-01
Add 115 lbs. to the weight.
(2) Weights include mounting brackets only, and do not
include weight of mounting plate.

34 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Mounting Systems – FW0070 Stationary Mounts

Bracket for Angle Mounting Bracket with Angle Mount

Applications Applications
Welded Over-the-Frame Angle Applications Over-the-Frame Angle Applications

Features Features
• Fabricated Steel Construction • 4˝x 4˝x .38˝x 36˝ Length Mounting Angle Standard
• Forged Steel Cap
• Nylon Lined ˝Up-Shock˝ Bushing

Dimensions Dimensions
18.0˝
(457)

3.5” 4.5˝
13.0” 6.5” (89) 36.0˝ (114)
(165) 4.4” (914)
(330) (113)

Part Numbers Part Numbers

FIFTH WHEEL ASSEMBLY FIFTH WHEEL ASSEMBLY
HEIGHT WEIGHT HEIGHT WEIGHT
MODEL NUMBER (1) MODEL NUMBER (1) (2)
FW0070-7623XL 7˝ 373 lbs. FW0070-7614GL 6˝ 441 lbs.
FW0070-7622XL 8˝ 380 lbs. FW0070-7613GL 7˝ 450 lbs.
FW0070-7621XL 9˝ 382 lbs. FW0070-7612GL 8˝ 457 lbs.
(1) For options, add the following to the end of FW0070-7611GL 9˝ 459 lbs.
the part number. For multiple option combinations, (1) For options, add the following to the end of the part
please contact Customer Service for the applicable number. For multiple option combinations, please contact
Option Code. Customer Service for the applicable Option Code.
• 3.5˝ Kingpin Lock – Option Code-03 • 3.5˝ Kingpin Lock – Option Code-03
(2) For the Frame Width, replace ˝G˝ (34.00˝ Frame Width
– 11th digit) in part number with the appropriate code
from the table below.
FRAME FRAME FRAME
WIDTH CODE WIDTH CODE WIDTH CODE
33.25˝ A 33.75˝ E 34.25˝ J
33.38˝ B 33.88˝ F 34.38˝ K
33.50˝ C 34.00˝ G 34.50˝ L
33.62˝ D 34.12˝ H

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 35

Mounting Systems – FW0070 Sliding Mounts

Inboard for Angle Mounting Part Numbers

(Over-the-Frame) FIFTH WHEEL ASSEMBLY
HEIGHT TRAVEL WEIGHT
MODEL NUMBER (1)
FW2570-7103X1L 8˝ 11˝ 850 lbs.
FW2570-7103X2L 8˝ 17˝ 870 lbs.
FW2570-7103Z3L 8˝ 25˝ 890 lbs.
FW2570-7103X4L 8˝ 41˝ 930 lbs.
FW2570-7103X5L 8˝ 54˝ 970 lbs.
FW2570-7103X6L 8˝ 66˝ 1010 lbs.
FW2570-7102X1L 9˝ 11˝ 855 lbs.
FW2570-7102X2L 9˝ 17˝ 875 lbs.
FW2570-7102Z3L 9˝ 25˝ 895 lbs.
FW2570-7102X4L 9˝ 41˝ 935 lbs.
Applications FW2570-7102X5L 9˝ 54˝ 975 lbs.
Over-the-Frame Mount Applications FW2570-7102X6L 9˝ 66˝ 1015 lbs.
(1) For options, add the following to the end of
the part number.
Features • 3.5˝ Kingpin Lock – Option Code-03
• Fabricated Steel Construction
• Forged Steel Cap
• Nylon Lined ˝Up-Shock˝ Bushings

Dimensions

37.0
(939)

REAR “A” TRAVEL “B” FRONT

“C”

PART NUMBER TRAVEL A B C

*X1L 11˝ 8.6˝ 19.3˝ 38.9˝
*X2L 17˝ 8.6˝ 19.4˝ 45.0˝
*Z3L 25˝ 8.6˝ 19.0˝ 52.6˝
*X4L 41˝ 8.6˝ 19.9˝ 69.5˝
*X5L 54˝ 8.6˝ 19.4˝ 82.0˝
*X6L 66˝ 8.6˝ 19.4˝ 94.0˝

36
36 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.
 Mounting Systems – No-Tilt Stationary Mounts

Outboard Mount Part Numbers

FIFTH WHEEL ASSEMBLY
HEIGHT WEIGHT (4)
MODEL NUMBER (1) (2) (3)
FW__N800YL00 8˝ 475 lbs.
FW__N900YL00 9˝ 477 lbs.
(1) __ = One of the following two digit top plate model
numbers: 33, 35
(2) For Right Hand (curb-side) Release Handle, replace L in
part number with R.
(3) For options, replace the 00 at the end of the part
number with the appropriate two digit code. For
multiple option combinations, please contact Customer
Service for the applicable Option Code.
Applications
Bolt-on Outboard Angle Applications • Air Release – Option Code-80
Fifth Wheels: FW33 and FW35 • Manual Secondary Lock – Option Code-02
• Left Hand Dolly Release Handle – Option Code-28
Features (4) Weights shown are for FW35. Add 25 lbs. for FW33.
• ½˝ Mounting Plate
• No-Tilt Brackets
• Fabricated Steel Construction
• Forged Steel Cap
• Nylon Lined ˝Up-Shock˝ Bushings

Dimensions
1.4” 40.0”
(34) (1016)
1.3” 37.2”
(33) (946)

26.6”
(676)
4.0”
(101)

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 37

37
Mounting Systems – No-Tilt Stationary Mounts

Inboard For Angle Mounting Part Numbers

(Over-the-Frame) FIFTH WHEEL ASSEMBLY
HEIGHT WEIGHT (4)
MODEL NUMBER (1) (2) (3)
FW__N800ZL00 8˝ 454 lbs.
(1) __ = One of the following two digit top plate model
numbers: 33, 35
(2) For Right Hand (curb-side) Release Handle, replace L in
part number with R.
(3) For options, replace the 00 at the end of the part
number with the appropriate two digit code. For
multiple option combinations, please contact Customer
Service for the applicable Option Code.
Applications • Air Release – Option Code-80
Over-the-Frame Mount Applications • Manual Secondary Lock – Option Code-02
Fifth Wheels: FW33 and FW35
• Left Hand Dolly Release Handle – Option Code-28
(4) Weights shown are for FW35. Add 25 lbs. for FW33.
Features
• 3/8˝ Mounting Plate

• No-Tilt Brackets
• Fabricated Steel Construction
• Forged Steel Cap
• Nylon Lined ˝Up-Shock˝ Bushings

Dimensions
40.0”
(1016)

26.6”
(676)

38
38 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.
 Mounting Systems – No-Tilt Sliding Mounts

ILS™ Outboard Mount Part Numbers

FIFTH WHEEL ASSEMBLY WEIGHT
HEIGHT TRAVEL
MODEL NUMBER (1) (2) (3) (4)
FW__N906YL00 9˝ 6˝ 530 lbs.
FW__N918YL00 9˝ 18˝ 564 lbs.
FW__N930YL00 9˝ 30˝ 598 lbs.
FW__N942YL00 9˝ 42˝ 631 lbs.

(1) __ = One of the following two digit top plate model

numbers: 33, 35
(2) For Right Hand (curb-side) Release Handle, replace L in
part number with R.
(3) For options, replace the 00 at the end of the part
Applications number with the appropriate two digit code. For
Bolt-On Outboard Angle Applications multiple option combinations, please contact Customer
Fifth Wheels: FW33 and FW35 Service for the applicable Option Code.
• Air Release – Option Code-80
Features • Manual Secondary Lock – Option Code-02
• No-Tilt Slider Bracket and Slide Plate • Left Hand Dolly Release Handle – Option Code-28
• Single-Piece, Bolt-On Cast Bracket
• Two-Piece Side Cushioning “Upshock” Bushings (4) Weights shown are for FW35. Add 25 lbs. for FW33.
• Slide-On (No Weld), Repositionable Bulk Head Fitting
Bracket
• Same Air Cylinder Location on All Heights, including
“Quick-Connect” Fittings
• 2˝ Slide Increments
• Universal “Tie Plate”

Dimensions
6˝
(17)

37.2˝
(946)

REAR “A” TRAVEL “B” FRONT

“C”

PART NUMBER TRAVEL A B C

*06X* 6˝ 19.8˝ 9.1˝ 39.0˝
*18X* 18˝ 19.8˝ 9.1˝ 51.0˝
*30X* 30˝ 19.8˝ 9.1˝ 63.0˝
*42X* 42˝ 19.8˝ 9.1˝ 75.0˝

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 39

39
Mounting Systems – No-Tilt Sliding Mounts

ILS™ Inboard Mount Part Numbers

(Over-the-Frame) FIFTH WHEEL ASSEMBLY WEIGHT
HEIGHT TRAVEL
MODEL NUMBER (1) (2) (3) (4)
FW__N906WL00 9˝ 6˝ 510 lbs.
FW__N918WL00 9˝ 18˝ 540 lbs.
FW__N930WL00 9˝ 30˝ 568 lbs.
FW__N942WL00 9˝ 42˝ 596 lbs.

(1) __ = One of the following two digit top plate model

numbers: 33, 35
(2) For Right Hand (curb-side) Release Handle, replace L in
part number with R.
(3) For options, replace the 00 at the end of the part
Applications number with the appropriate two digit code. For
multiple option combinations, please contact Customer
Over-the-Frame Mount Applications
Service for the applicable Option Code.
Fifth Wheels: FW33 and FW35
• Air Release – Option Code-80
Features • Manual Secondary Lock – Option Code-02
• No-Tilt Slider Bracket and Slide Plate • Left Hand Dolly Release Handle – Option Code-28
• Single-Piece, Bolt-On Cast Bracket
• Two-Piece Side Cushioning “Upshock” Bushings (4) Weights shown are for FW35. Add 25 lbs. for FW33.
• Slide-On (No Weld), Repositionable Bulk Head Fitting
Bracket
• Same Air Cylinder Location on All Heights, including
“Quick-Connect” Fittings
• 2˝ Slide Increments
• Universal “Tie Plate”

Dimensions

35.5˝
(902)

REAR “A” TRAVEL “B” FRONT

“C”

PART NUMBER TRAVEL A B C

*06X* 6˝ 19.8˝ 9.1˝ 39.0˝
*18X* 18˝ 19.8˝ 9.1˝ 51.0˝
*30X* 30˝ 19.8˝ 9.1˝ 63.0˝
*42X* 42˝ 19.8˝ 9.1˝ 75.0˝

40 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Mounting Systems – Kompensator® Stationary Mounts

Outboard Plate Mount Part Numbers

FIFTH WHEEL ASSEMBLY
HEIGHT WEIGHT
MODEL NUMBER (1) (2)
FW35-7729XL 10˝ 575 lbs.
FW35-7727XL 12˝ 640 lbs.
FW35-7726XL 13˝ 649 lbs.

FIFTH WHEEL ASSEMBLY

HEIGHT WEIGHT
MODEL NUMBER (1) (2)
FW33K000YL00 10˝ 600 lbs.
FW33K200YL00 12˝ 665 lbs.
FW33K300YL00 13˝ 674 lbs.

Applications
FIFTH WHEEL ASSEMBLY
Bolt-on Outboard Angle Applications HEIGHT WEIGHT
MODEL NUMBER (2)
Fifth Wheels: FW35, FW33, FW0070
FW7040-7779XL 10˝ 749 lbs.
FW7040-7777XL 12˝ 821 lbs.
Features FW7040-7776XL 13˝ 836 lbs.
• Side-to-Side Oscillation
• Cradle Design
(1) For Right Hand (curb-side) Release Handle, replace L
• Fabricated Steel Construction
in part number with R. Right hand release available on
• Optional Lock Out
FW35 and FW33.
• 3/8˝ Mounting Plate - FW35
• 1/2˝ Mounting Plate - FW7040 (2) For options, add the appropriate two digit code to
• Provides Torsional Stress Relief and Promotes Vehicle the end of the part number. For multiple option
Stability in Trailers Where the Loaded Center of Gravity combinations, please contact Customer Service for the
is Up to 44˝ Above the Top Plate Surface applicable Option Code.
• Manual Secondary Lock – Standard on FW7040.
TANKER IN TANKER IN
TANKER IN
UNEVEN/ROUGH
UNEVEN/ROUGH TERRAIN TERRAINUNEVEN/ROUGH
TANKER IN
UNEVEN/ROUGH
TERRAIN TERRAIN
Available on FW35 and FW33.
WITHOUT
WITHOUT KOMPENSATOR KOMPENSATOR
® ®
WITH
WITH KOMPENSATOR® KOMPENSATOR ®
Option Code-02
Center of Gravity
Center of Gravity Center of Gravity
Center of Gravity
Shifts Off
Shifts Off Vehicle Vehicle Center is Stable atisVehicle
Center Stable Center
at Vehicle Center • Drilled and Tapped for Autolube – Availble on
FW35 and FW7040. Option Code-24
• Kompensator® Lock Out – Option Code-19
(Add 5 lbs. to weight)
• Kompensator® Dust Covers – Option
Code-13
High High Frame Frame • 3.5˝ Kingpin Lock – Available on FW7040.
Frame Frame Stresses Stresses
Stresses Stresses Relieved Relieved Option Code-03
• Undrilled Mounting Plate – Option
Code-1K (FW33). For FW35, refer to chart
below.
Dimensions
FIFTH WHEEL ASSEMBLY
40.0” 3.0” HEIGHT
37.2” (1016) (76) MODEL NUMBER
(946)
FW35-7723XL 10˝
FW35-7722XL 12˝
30.0” FW35-7721XL 13˝
(762)
(Subtract 8 lbs. from weight)

.4”
(9)

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 41

Mounting Systems – Kompensator® Sliding Mounts

Inboard for Angle Mounting Part Numbers

(Over-the-Frame) FIFTH WHEEL ASSEMBLY
HEIGHT TRAVEL WEIGHT
MODEL NUMBER (1) (2)
FW35-7201X1L 13˝ 11˝ 752 lbs.
FW35-7201X2L 13˝ 17˝ 771 lbs.
FW35-7201X3L 13˝ 24˝ 828 lbs.
FW35-7201X4L 13˝ 41˝ 912 lbs.
FW35-7201X5L 13˝ 54˝ 986 lbs.
FW35-7201X6L 13˝ 66˝ 1051 lbs.

FIFTH WHEEL ASSEMBLY

HEIGHT TRAVEL WEIGHT
MODEL NUMBER (1) (2)
Applications FW33K311ZL00 13˝ 11˝ 777 lbs.
FW33K317ZL00 13˝ 17˝ 796 lbs.
Over-the-Frame Mount Applications
FW33K325AL00 13˝ 24˝ 853 lbs.
Fifth Wheels: FW35, FW33, FW0070
FW33K341ZL00 13˝ 41˝ 937 lbs.
FW33K354ZL00 13˝ 54˝ 1011 lbs.
Features FW33K366ZL00 13˝ 66˝ 1076 lbs.
• Side-to-Side Oscillation
• Cradle Design FIFTH WHEEL ASSEMBLY
• Fabricated Steel Construction HEIGHT TRAVEL WEIGHT
MODEL NUMBER (1) (2)
• Optional Lock Out
FW7090-7251X1L 13˝ 11˝ 910 lbs.
• Provides Torsional Stress Relief and Promotes Vehicle
FW7090-7251X2L 13˝ 17˝ 960 lbs.
Stability in Trailers Where the Loaded Center of Gravity
FW7090-7251Z3L 13˝ 24˝ 1005 lbs.
is Up to 44˝ Above the Top Plate Surface
FW7090-7251X4L 13˝ 41˝ 1105 lbs.
TANKER IN TANKER IN TANKER IN TANKER IN
UNEVEN/ROUGH
FW7090-7251X5L 13˝ 54˝ 1205 lbs.
UNEVEN/ROUGH
UNEVEN/ROUGH TERRAIN TERRAINUNEVEN/ROUGH TERRAIN TERRAIN
WITHOUT WITHOUT
KOMPENSATOR KOMPENSATOR WITH KOMPENSATOR
® ®
WITH KOMPENSATOR
® ®
FW7090-7251X6L 13˝ 66˝ 1305 lbs.
Center of Gravity
Center of Gravity Center of Gravity
Center of Gravity
Shifts Off
Shifts Off Vehicle Vehicle Center is Stable atisVehicle
Center Stable Center
at Vehicle Center
(1) For Right Hand (curb-side) Release Handle, replace L in
part number with R. Right hand release available on
FW35 and FW33.
(2) For options, add the appropriate two digit code to
the end of the part number. For multiple option
High Frame
High
Frame Frame
Frame
Stresses Stresses combinations, please contact Customer Service for the
Stresses Stresses Relieved Relieved
applicable Option Code.
• Manual Secondary Lock – Standard on FW7090.
Available on FW35 and FW33 –
Option Code-02
• Kompensator® Lock Out – Option Code 19 –
Dimensions (Add 5 lbs. to weight)
• Drilled and Tapped for Autolube – Available on
FW35 and FW7090 –Option Code-24
• 3.5˝ Kingpin Lock – Available on FW7090 –
Option Code-03
• Kompensator® Dust Covers – Option
37.0˝ Code-13
(939)

PART NUMBER TRAVEL A B C

*X1L 11˝ 10.4˝ 17.5˝ 38.9˝
*X2L 17˝ 10.4˝ 17.6˝ 45.0˝
*X3L 25˝ 10.4˝ 17.2˝ 52.6˝
*X4L 41˝ 10.4˝ 18.1˝ 69.5˝
*X5L 54˝ 10.4˝ 17.6˝ 82.0˝
REAR “A” TRAVEL “B” FRONT *X6L 66˝ 10.4˝ 17.6˝ 94.0˝
“C”

42 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Custom Service Tools for Fifth Wheels

Essential service and checking tools -

Specially designed for HOLLAND Fifth Wheel
products.
2˝ Fifth Wheel Lock Adjustment Tools
TF-TLN-5001
Designed for checking fifth wheel locking action and lock
adjustment during periodic adjustment or rebuilding of all
2˝ Kingpin Lock HOLLAND fifth wheels except for FWS1 (XA-S1),
FWS2 (XA-S2), and all Simplex fifth wheels.

4000171
Designed for checking fifth wheel locking action and lock
adjustment during periodic adjustment or rebuilding of all
HOLLAND FWS1 (XA-S1), FWS2 (XA-S2) and Simplex fifth wheels.

3.5˝ Fifth Wheel Lock Adjustment Tool

TF-TLN-1500
Designed for checking fifth wheel locking action and lock
adjustment of all 3.5˝ Kingpin lock HOLLAND fifth wheels.

Slider Spring Compressor

TF-TLN-2500
Designed exclusively for removing and installing springs, retainers
and pins of the slide release mechanisms of HOLLAND sliding fifth
wheels. Luster plated; a must for every handyman’s tool box. For
best results, operate with a 5/8˝ socket and ratchet.

2˝ Plug
TF-0237
This 2˝ plug is designed to assist in lock installation and
adjustment during rebuilding or lock replacement of FW35,
FW33, and FW31 fifth wheels.

Fifth Wheel Rebuild Stand

TF-04229-1
The HOLLAND fifth wheel rebuild stand allows top plate rotation
for easy access to both bottom and top surfaces of the top plate
for easy rebuilding. Easy nut and bolt assembly for convenience
and compact storage.

For use with the following top plates:

XA-351, XA-331, XA-311, XA-AL, XA-17, XA-161, XA-S1, XA-S2,
XA-201, XA-231, and XA-71

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 43

 THIS PAGE INTENTIONALLY LEFT BLANK

44 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 SPECIFICATION
GUIDE

CONTENTS:

• SEVEN STEPS TO SPECIFYING THE CORRECT FIFTH WHEEL

• ITEMS TO CONSIDER BEFORE SPECIFYING A FIFTH WHEEL
Specification Guide – Specification Steps

The HOLLAND Fifth Wheel Specification Guide is designed to assist you to quickly complete the fifth
wheel specification process. Simply complete Steps 1-7 to determine the correct fifth wheel part
number to order. If after completing Steps 1-7 you are unable to determine the correct part number,
please contact your SAF-HOLLAND representative for assistance. In the U.S. call 1-888-396-6501.
In Canada, call 519-537-2366.

Step 1 Review ˝Items to consider Before Selecting your Fifth Wheel˝ on Pages 47-51.

Step 2 Determine the type of vehicle your fifth wheel will be mounted on (for
example, tractor, converter dolly, or B-train connection) and the type of trailer
your fifth wheel will be connected to (for example, van, tanker, etc.).

Step 3 Using the HOLLAND Fifth Wheel Application Guide on Pages 6-8, determine
whether your vehicle will be used in a Standard, Moderate, or Severe duty
application.

Step 4 Using the HOLLAND Fifth Wheel Application Guide on Pages 6-8, determine
which fifth wheel top plates may be applicable based on the duty type,
vehicle and trailer type, and capacity requirements.

Step 5 Using the HOLLAND Fifth Wheel Options Guide on Page 9, determine the
appropriate type of fifth wheel to select based on what options are required
(for example, an air release locking system). For specification information
please refer to the appropriate page in the HOLLAND Fifth Wheel Top Plate
Models section of this Specification Guide, Pages 11-25.

Step 6 Using the HOLLAND Fifth Wheel Application Guide on Pages 6-8,
determine the appropriate type of mounting system to select based on
the top plate selected (for example, standard, No-Tilt, or Kompensator®;
and either stationary or sliding) and method of tractor frame attachment.
For specification information on top plates and their applicable mounting
systems, please refer to the appropriate page in the HOLLAND Fifth Wheel
Mounting Systems section of this Specification Guide, Pages 27-42.

Step 7 A Stationary Mounting Systems

Having selected the required stationary mounting system, refer to Page 53
to determine the height required. To determine the correct part number for
ordering, please refer to the appropriate page in the HOLLAND Fifth Wheel
Mounting Systems section of this Specification Guide, Pages 27-42.
B Sliding Mounting Systems
Having selected the required sliding mounting system, refer to Page 53
to determine the height and travel required. To determine the correct part
number for ordering, please refer to the appropriate page in the HOLLAND
Fifth Wheel Mounting Systems section of this Specification Guide, Pages
27-42.

46 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Specification Guide – Items to Consider

Fifth Wheel Ratings and Capacities

The selection of the proper fifth wheel capacity is the most critical step in specifying a fifth
wheel. The use of a fifth wheel that does not meet the required capacity for the demands of
the application may result in maintenance problems or more importantly, an unsafe operating
condition. The user should specify a higher capacity rating then his normal needs require, taking
into consideration the towed vehicle weight (TVW) to be pulled, maximum drawbar load expected,
vertical load to be carried by the fifth wheel, and type of operation (for example, off-highway use
will normally require a higher capacity rating than on-highway use). The HOLLAND Fifth Wheel
Application Guide on Pages 6-8, can help determine the appropriate fifth wheel capacity required.

Fifth Wheel Options

More than one model of fifth wheel may meet the user’s capacity requirements. In this event, fifth
wheel options offered may help determine the appropriate top plate model. Available top plate
options include: Right Hand Release, Air Release, Manual Secondary Lock, LowLube, NoLube™,
Drilled and Tapped for Auto Lube, and Fully Oscillating, as well as No-Tilt and Kompensator®
mounting systems. For a complete listing of fifth wheel options by model, please refer to the
HOLLAND Fifth Wheel Options Guide on Page 9. For top plate specification information, please
refer to the appropriate page in the HOLLAND Fifth Wheel Top Plate Models section of this
Specification Guide, Pages 11-25.

Fifth Wheel Weight

Another determining factor in selecting a fifth wheel model is the weight. The weight of the fifth
wheel should be a balance between operational cost, strength, and durability. Any additional
weight (above the application requirements), will result in additional expenses such as initial cost,
reduced cargo carrying capacity, and additional fuel cost.

Special Application Fifth Wheels

Some applications may require a specialized type of fifth wheel or mounting system.

LowLube (FW33, FW16, and FWAL, Pages 13, 16, and 17)
On-road fifth wheels designed to provide the lightest weight LowLube fifth
wheels available. Replaceable lube free plate inserts and lube free pocket inserts
eliminate the need for lubrication except for the fifth wheel locking mechanism.

NoLube™ (FW31 Page 14)

On-road fifth wheels designed to require no lubrication. Patented surface
alloy treated lock system components combine with replaceable lube free
plate inserts, and lube free pocket inserts to completely eliminate the need
for lubrication.

Aluminum (FWAL, Page 17)

An on-road LowLube fifth wheel made of forged Aluminum to provide the
lightest weight fifth wheel in the world. Replaceable lube free plate inserts
and lube free pocket inserts eliminate the need for lubrication, except for
the fifth wheel locking mechanism.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 47

Specification Guide – Items to Consider

Special Application Fifth Wheels continued

Fully Oscillating (FW2080, Page 20)
Fifth wheels designed to provide both front-to-rear and
Vehicle
side-to-side oscillation between the tractor and trailer for Centerline
use on rough and uneven terrain (mining, logging, etc.).
The oscillation is provided by an undercarriage employing
both transverse and longitudinal shafts. The side-to-side Side-to-Side
Front-to-Rear
oscillation point is located below the fifth wheel bearing Oscillation Oscillation
surface. They are intended for applications where the
center of gravity of the loaded trailer is at or below
the top of the fifth wheel.

No-Tilt (FW35 and FW33, Pages 12 and 13)

Fifth wheels designed to be convertible from a standard
articulating fifth wheel to a rigid ˝no-tilt˝ fifth wheel when
required. In applications requiring this type of fifth wheel,
the oscillation (articulation) is provided by other means
(for example, an articulating upper coupler).

Kompensator® (FW35, FW33 and FW0070, Pages 12,

13 and 18)
Fifth wheel mounting system designed to provide both
front-to rear and side-to-side oscillation between the
tractor and trailer while relieving the twisting force
between the tractor and trailer for use on rigid trailers
(tankers, etc.) operating on rough and uneven terrain.
The side-to-side oscillation point is located well above
the fifth wheel bearing surface. It is intended for
applications where the center of gravity of the loaded
5˚ 5˚
trailer does not exceed 44˝ above the top surface of Center of
the fifth wheel. Gravity

48 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Specification Guide – Items to Consider

Fifth Wheel Mounting Systems

After determining the appropriate top plate model, the mounting system
must be specified. The first step is to determine whether a standard mounting
system is sufficient or if the application requires a specialized mounting system
such as a No-Tilt or Kompensator®. The next decision is whether the application
requires a stationary or sliding mount system.

Stationary Fifth Wheels

Stationary fifth wheels are best suited for applications
where the axle loading, kingpin setting, and vehicle
combination length all remain constant throughout the
Figure 1
fleet. Stationary fifth wheels are generally lighter than
sliding fifth wheels but do not offer the application
flexibility of sliding fifth wheels. Based on the suspension
and tractor frame, one of three tractor frame attachment
methods may be specified (Figures 1-3);

1) ˝Angle-on-Frame Bracket Mount˝ (low cost and Figure 2

less torsional rigidity) (Figure 1)
2) ˝Foot Mount˝ (higher cost and high torsional rigidity)
(Figure 2). A flat or corrugated mounting plate is
required for foot mount brackets.
3) ˝Outboard Angle Integrated Plate Mount˝ Figure 3
(universal hole pattern for medium torsional rigidity
bolt-on mounting) (Figure 3)

The final step in specifying a stationary mount fifth wheel is

to determine the height required. Please see Page 51 for a
discussion of factors to be considered when determining
fifth wheel assembly height requirements.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 49

Specification Guide – Items to Consider

Fifth Wheel Mounting Systems continued

Sliding Fifth Wheels
Sliding fifth wheels are best suited for applications where the axle
loading, kingpin setting, and vehicle combination length do not
remain constant throughout the fleet. Sliding fifth wheels provide the
capability to 1) transfer weight between tractor axles, 2) accommodate
trailers with different kingpin settings, and 3) vary vehicle combination
lengths. Sliding fifth wheels also provide:
Better Resale Value by providing maximum equipment flexibility
Improved Maneuverability by allowing the fifth wheel to
slide forward for additional maneuverability in tight locations or
slide rearward to accommodate trailers with short landing gear
clearance.
Increased Ride Comfort by locating the fifth wheel closer to
the centerline of the bogie or rear axle. When the axles are Figure 4
not overloaded, the driver has the ability to extend the unit for
maximum comfort.
Based on the suspension and tractor frame, one of two tractor
frame attachment methods may be specified (Figures 4-5);
1) ˝Over-the-Frame Inboard Angle Mount˝ (Figure 4)
2) ˝Outboard Angle Mount˝ (bolt-on mounting) (Figure 5)
The final step in specifying a sliding mount fifth wheel is to
determine the height and travel length required. Please see the next Figure 5
page for a discussion of factors to be considered when determining
fifth wheel assembly height and slide travel requirements.

50 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Specification Guide – Items to Consider

Fifth Wheel Height

Correct fifth wheel height specification is critical because the overall
combination tractor/trailer height cannot exceed 13’6˝. Fifth wheels are
designed to operate with the top plate level, so every attempt should
be made to match the fifth wheel height with the trailer upper coupler
(bolster plate) height. The maximum allowable fifth wheel height is
determined by subtracting the trailer height and tractor frame height
from the maximum height of 13’6˝. In addition, operating conditions
must be considered to ensure the tractor/trailer will not exceed the
available articulation damaging the fifth wheel, tractor frame, or trailer
(the lower the fifth wheel height, the less articulation available, especially
in off-road applications). Tire clearance should also be considered,
keeping in mind spring deflection under full load.

Another important consideration in determining fifth wheel height is

developing a standard fleet specification. Having all tractors with the
same mounted fifth wheel height (height from the ground to the top of
the fifth wheel) aids in proper coupling by reducing the need to adjust
trailer landing gear before coupling.

Fifth Wheel Slide Travel Length

Proper slide length specification is very important. Too short a slide
length and optimum equipment utilization may not be achieved (for
example inability to shift enough kingpin load to the front axle).
Too long a slide length and overloading of the front axle, or interference
between the tractor/trailer during cornering may occur. Over
specification of slide length also results in unnecessary additional tractor
weight and initial fifth wheel cost.

Fifth Wheel Cost

No discussion of fifth wheels would be complete without referring to
costs. Users should always balance the initial cost of the unit to be
purchased against the application required, maintenance costs, wear
life, and availability of parts and service. The least expensive initial cost
fifth wheel may have a higher total cost after factoring in operational
and repair costs related to tractor downtime, kingpin replacement, and
tractor/trailer frame damage. If a specialty fifth wheel (for example,
a Kompensator®) or special options have been recommended for
your application, special consideration should be given to those
recommendations. The benefits may offset the additional initial cost.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 51

 THIS PAGE INTENTIONALLY LEFT BLANK

52 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 40.0˝
(1016)

1.3˝
(32)
FIFTH WHEEL
4.0˝
(102)

ASSEMBLY 18.5˝
(470)

DIMENSIONS 40º

37.3˝
(946)

13.5˝ 19.0˝
(343) (484)

“B” “A” “HEIGHT”

HOLLAND Fifth Wheel – Assembly Dimensions

FW35 Stationary FW35 Stationary

Foot Mount Integrated Plate Mount

39.9˝ 40.0˝
(1013) (1016)

1.3˝
(32)

18.0˝
4.0˝
16.0˝ (457) (102)
(406)
18.5˝
(470)

40º
40º

36.8˝
(935) 37.3˝
(946)

13.5˝ 19.0˝ 13.5˝ 19.0˝

(343) (484) (343) (484)

“B” “A” “HEIGHT”

“B” “A” “HEIGHT”

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT A B WEIGHT

FW35Y600XL00 5.6˝ 8º 8º 296 lbs. FW35Z600XL00 5.6˝ 8º 8º 312 lbs.
FW35Y700XL00 6.6˝ 11º 11º 302 lbs. FW35Z700XL00 6.6˝ 11º 11º 320 lbs.
FW35Y800XL00 7.6˝ 14º 14º 307 lbs. FW35Z800XL00 7.6˝ 14º 14º 327 lbs.
FW35Y900XL00 8.6˝ 17º 17º 312 lbs. FW35Z900XL00 8.6˝ 17º 17º 323 lbs.
Corrugated Plate Option adds .9˝ to height.
A flat or corrugated mounting plate is required for foot
mount brackets. 5.6˝ height requires a cutout in the
mounting plate for proper articulation. Refer to Fifth Wheel
Installation Manual (XL-FW10008IM) for specifications.
Weights include mounting brackets only, and do not
include weight of mounting plate.

54 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 HOLLAND Fifth Wheel – Assembly Dimensions

FW35 Stationary Brackets FW35 Stationary Brackets

for Angle Mounting with Angle Mounting

FRAME WIDTH

36.0”
(914)

40° 40°

33.2”
4.0”
(843) (102)

13.5” 19.0” 13.5” 19.0”

(343) (484) (343) (484)

"B" "A""HEIGHT" "B" "A" "HEIGHT"

4.0”
(102)

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT A B WEIGHT

FW35X600XL00 5.2˝ 8º 8º 267 lbs. FW35W600GL00 5.6˝ 8º 8º 325 lbs.
FW35X700XL00 6.2˝ 11º 11º 273 lbs. FW35W700GL00 6.6˝ 11º 11º 331 lbs.
FW35X800XL00 7.2˝ 14º 14º 278 lbs. FW35W800GL00 7.6˝ 14º 14º 336 lbs.
FW35X900XL00 8.2˝ 17º 17º 283 lbs. FW35W900GL00 8.6˝ 17º 17º 341 lbs.

FRAME FRAME FRAME

WIDTH CODE WIDTH CODE WIDTH CODE
33.25˝ A 33.75˝ E 34.25˝ J
33.38˝ B 33.88˝ F 34.38˝ K
33.50˝ C 34.00˝ G 34.50˝ L
33.62˝ D 34.12˝ H

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 55

HOLLAND Fifth Wheel – Assembly Dimensions

FW35 ILS™ Outboard FW35 ILS™ Inboard

Sliding Mount Sliding Mount

“A”
40.0”
(1016) 4.0”
(102) "A"

37.3”
(946) 35.5”
40º (902)
39.5”
(1003)

9.8” "SLIDE LENGTH" 9.8”

“SLIDE LENGTH” (248)
(248)

13.5” 19.0” 13.5” 19.0”

(343) (484) (343) (484)

“C” "C" "B""HEIGHT"

“B”
“HEIGHT”

SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW35A712XL00 6.7˝ 12˝ 31˝ 8° 8° 414 lbs. FW35B712XL00 6.7˝ 12˝ 31˝ 8° 8° 399 lbs.
FW35A724XL00 6.7˝ 24˝ 43˝ 8° 8° 447 lbs. FW35B724XL00 6.7˝ 24˝ 43˝ 8° 8° 427 lbs.
FW35A736XL00 6.7˝ 36˝ 55˝ 8° 8° 481 lbs. FW35B736XL00 6.7˝ 36˝ 55˝ 8° 8° 455 lbs.
FW35A748XL00 6.7˝ 48˝ 67˝ 8° 8° 514 lbs. FW35B748XL00 6.7˝ 48˝ 67˝ 8° 8° 483 lbs.
FW35A812XL00 7.7˝ 12˝ 31˝ 12° 10° 418 lbs. FW35B812XL00 7.7˝ 12˝ 31˝ 12° 10° 404 lbs.
FW35A824XL00 7.7˝ 24˝ 43˝ 12° 10° 452 lbs. FW35B824XL00 7.7˝ 24˝ 43˝ 12° 10° 432 lbs.
FW35A836XL00 7.7˝ 36˝ 55˝ 12° 10° 486 lbs. FW35B836XL00 7.7˝ 36˝ 55˝ 12° 10° 460 lbs.
FW35A848XL00 7.7˝ 48˝ 67˝ 12° 10° 519 lbs. FW35B848XL00 7.7˝ 48˝ 67˝ 12° 10° 488 lbs.
FW35A912XL00 8.7˝ 12˝ 31˝ 15° 12° 422 lbs. FW35B912XL00 8.7˝ 12˝ 31˝ 15° 12° 408 lbs.
FW35A924XL00 8.7˝ 24˝ 43˝ 15° 12° 456 lbs. FW35B924XL00 8.7˝ 24˝ 43˝ 15° 12° 436 lbs.
FW35A936XL00 8.7˝ 36˝ 55˝ 15° 12° 489 lbs. FW35B936XL00 8.7˝ 36˝ 55˝ 15° 12° 464 lbs.
FW35A948XL00 8.7˝ 48˝ 67˝ 15° 12° 523 lbs. FW35B948XL00 8.7˝ 48˝ 67˝ 15° 12° 492 lbs.
FW35A012XL00 9.8˝ 12˝ 31˝ 15° 15° 434 lbs. FW35B012XL00 9.8˝ 12˝ 31˝ 15° 15° 420 lbs.
FW35A024XL00 9.8˝ 24˝ 43˝ 15° 15° 468 lbs. FW35B024XL00 9.8˝ 24˝ 43˝ 15° 15° 448 lbs.
FW35A036XL00 9.8˝ 36˝ 55˝ 15° 15° 501 lbs. FW35B036XL00 9.8˝ 36˝ 55˝ 15° 15° 476 lbs.
FW35A048XL00 9.8˝ 48˝ 67˝ 15° 15° 535 lbs. FW35B048XL00 9.8˝ 48˝ 67˝ 15° 15° 504 lbs.

56 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 HOLLAND Fifth Wheel – Assembly Dimensions

FW35 Stationary No-Tilt FW35 Stationary No-Tilt

Outboard Mount Inboard for Angle Mounting

40.0” 40.0˝
(1016) (1016)
37.3” 1.4”
(946) (35)
1.3”
(33)

9.8˝
(248)
4.0”
(102) 26.6˝
(676)
26.6”
(676)

28.8˝
(730)
28.8˝
(730)

13.5˝ 19.1˝
(484) 13.5˝ 19.0˝
(343) (343) (484)

15° 9°
“B” “A” “HEIGHT”
“HEIGHT”

2.6˝ 2.6˝
(67) (67)

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT WEIGHT

FW35N800YL00 7.8˝ 9º 15º 475 lbs. FW35N800ZL00 7.7˝ 443 lbs.
FW35N900YL00 8.8˝ 14º 15º 477 lbs.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 57

HOLLAND Fifth Wheel – Assembly Dimensions

FW35 ILS™ Sliding No-Tilt FW35 ILS™ Sliding No-Tilt

Outboard Mount Inboard for Angle Mounting

"A"
"A"

39.5”
(1003)
37.3” 35.5”
(946) (902)

“SLIDE LENGTH” 15.7”

“SLIDE LENGTH” 15.7” (399)
(399)

13.5” 19.0” 13.5” 19.0”

(343) (484) (343) (484)
“B” “B”
“C” “C”
“HEIGHT” “HEIGHT”

SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW35N906YL00 8.8˝ 6.0˝ 39˝ 9° 12° 530 lbs. FW35N906WL00 8.8˝ 6.0˝ 39˝ 9° 12° 510 lbs.
FW35N918YL00 8.8˝ 18.0˝ 51˝ 9° 12° 564 lbs. FW35N918WL00 8.8˝ 18.0˝ 51˝ 9° 12° 540 lbs.
FW35N930YL00 8.8˝ 30.0˝ 63˝ 9° 12° 598 lbs. FW35N930WL00 8.8˝ 30.0˝ 63˝ 9° 12° 568 lbs.
FW35N942YL00 8.8˝ 42.0˝ 75˝ 9° 12° 631 lbs. FW35N942WL00 8.8˝ 42.0˝ 75˝ 9° 12° 596 lbs.

58 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 HOLLAND Fifth Wheel – Assembly Dimensions

FW35 Stationary Kompensator® FW35 Sliding Kompensator®

Outboard Plate Mount Inboard for Angle Mounting

40.0˝ “A”
(1016)
2.0˝
(51)

28.0˝ 40° 37.0˝

(711) (940)

10.4˝
“Slide (264)
Length”

13.5˝ 19.1˝ 13.5˝ 19.1˝

(343) (484) (343) (484)

“C”
“B” “B”
“A” “HEIGHT” “HEIGHT”

PART NUMBER HEIGHT A B WEIGHT SLIDE

PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW35-7729XL 9.8˝ 19° 19º 575 lbs.
FW35-7727XL 11.8˝ 19º 19º 640 lbs. FW35-7201X1L 12.9˝ 10.7˝ 38.9˝ 26° 22° 752 lbs.
FW35-7726XL 12.8˝ 19º 19º 649 lbs. FW35-7201X2L 12.9˝ 16.8˝ 45.0˝ 26° 22° 771 lbs.
FW35-7201X3L 12.9˝ 24.5˝ 52.6˝ 26° 22° 828 lbs.
FW35-7201X4L 12.9˝ 41.3˝ 69.5˝ 26° 22° 912 lbs.
FW35-7201X5L 12.9˝ 53.6˝ 82.0˝ 26° 22° 986 lbs.
FW35-7201X6L 12.9˝ 65.8˝ 94.0˝ 26° 22° 1051 lbs.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 59

HOLLAND Fifth Wheel – Assembly Dimensions

FW33 Stationary FW33 ILS™ Sliding

Integrated Plate Mount Outboard Mount

40.0” 40.0”
(1016) (1016)

1.3”
(32)

37.3”
4.0” (946)
(102) 18.5” 40° 39.5”
(470) (1003)

40°

37.3” 4.0” "SLIDE LENGTH" 9.8”

(946) (102) (248)
"A"
13.5” 19.0”
(343) (484)
13.5” 19.0”
(343) (484)
"B" "A" "C"
"HEIGHT" "B""HEIGHT"

PART NUMBER HEIGHT A B WEIGHT SLIDE

PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW33Z600XL00 6.0˝ 8° 8º 337 lbs.
FW33Z700XL00 7.0˝ 11º 11º 345 lbs. FW33A712XL00 7.1˝ 12˝ 31˝ 8° 8° 439 lbs.
FW33A724XL00 7.1˝ 24˝ 43˝ 8° 8° 472 lbs.
FW33Z800XL00 8.0˝ 14º 14º 352 lbs.
FW33A736XL00 7.1˝ 36˝ 55˝ 8° 8° 506 lbs.
FW33Z900XL00 9.0˝ 17º 17º 348 lbs.
FW33A748XL00 7.1˝ 48˝ 67˝ 8° 8° 539 lbs.
FW33A812XL00 8.1˝ 12˝ 31˝ 12° 10° 443 lbs.
FW33A824XL00 8.1˝ 24˝ 43˝ 12° 10° 477 lbs.
FW33A836XL00 8.1˝ 36˝ 55˝ 12° 10° 511 lbs.
FW33A848XL00 8.1˝ 48˝ 67˝ 12° 10° 544 lbs.
FW33A912XL00 9.1˝ 12˝ 31˝ 15° 12° 447 lbs.
FW33A924XL00 9.1˝ 24˝ 43˝ 15° 12° 481 lbs.
FW33A936XL00 9.1˝ 36˝ 55˝ 15° 12° 514 lbs.
FW33A948XL00 9.1˝ 48˝ 67˝ 15° 12° 548 lbs.
FW33A012XL00 10.1˝ 12˝ 31˝ 15° 15° 459 lbs.
FW33A024XL00 10.1˝ 24˝ 43˝ 15° 15° 493 lbs.
FW33A036XL00 10.1˝ 36˝ 55˝ 15° 15° 526 lbs.
FW33A048XL00 10.1˝ 48˝ 67˝ 15° 15° 560 lbs.

60 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 HOLLAND Fifth Wheel – Assembly Dimensions

FW33 ILS™ Sliding FW33 Stationary No-Tilt

Inboard Mount for Angle Outboard Mount

40.0”
"A" (1016) 1.4”
37.3”
(946) (35)
1.3”
(33)

35.5” 4.0”
(902) (102)
40°

26.6”
(676)

"SLIDE LENGTH" 9.8”

(248)
28.8˝
(730)

13.5˝ 19.1˝
(343) (484)
13.5” 19.0”
(343) (484)
“B” “A”
"C" "B" “HEIGHT”
"HEIGHT"

2.6˝
SLIDE PART NUMBER HEIGHT A B (67)
WEIGHT
PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW33N800YL00 8.2˝ 9º 15º 500 lbs.
FW33B712XL00 7.1˝ 12˝ 31˝ 8° 8° 424 lbs.
FW33N900YL00 9.2˝ 14º 15º 502 lbs.
FW33B724XL00 7.1˝ 24˝ 43˝ 8° 8° 452 lbs.
FW33B736XL00 7.1˝ 36˝ 55˝ 8° 8° 480 lbs.
FW33B748XL00 7.1˝ 48˝ 67˝ 8° 8° 508 lbs.
FW33B812XL00 8.1˝ 12˝ 31˝ 12° 10° 429 lbs.
FW33B824XL00 8.1˝ 24˝ 43˝ 12° 10° 457 lbs.
FW33B836XL00 8.1˝ 36˝ 55˝ 12° 10° 485 lbs.
FW33B848XL00 8.1˝ 48˝ 67˝ 12° 10° 513 lbs.
FW33B912XL00 9.1˝ 12˝ 31˝ 15° 12° 433 lbs.
FW33B924XL00 9.1˝ 24˝ 43˝ 15° 12° 461 lbs.
FW33B936XL00 9.1˝ 36˝ 55˝ 15° 12° 489 lbs.
FW33B948XL00 9.1˝ 48˝ 67˝ 15° 12° 517 lbs.
FW33B012XL00 10.1˝ 12˝ 31˝ 15° 15° 445 lbs.
FW33B024XL00 10.1˝ 24˝ 43˝ 15° 15° 473 lbs.
FW33B036XL00 10.1˝ 36˝ 55˝ 15° 15° 501 lbs.
FW33B048XL00 10.1˝ 48˝ 67˝ 15° 15° 529 lbs.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 61

Holland Fifth Wheel – Assembly Dimensions

FW33 Stationary No-Tilt FW33 ILS™ Sliding No-Tilt

Inboard for Angle Mounting Outboard Mount

40.0˝
(1016)

"A"
9.8˝
(248)

26.6˝
(676)
39.5”
(1003)
37.3”
(946)

28.8˝
(730)

“SLIDE LENGTH” 15.7”

(399)
13.5˝ 19.0˝
(343) (484)
13.5” 19.0”
(343) (484)
15° 9° “B”
“C”
“HEIGHT” “HEIGHT”

2.6˝
(67)

PART NUMBER HEIGHT WEIGHT SLIDE

PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW33N800ZL00 8.1˝ 468 lbs.
FW33N906YL00 9.2˝ 6.0˝ 39˝ 9° 12° 555 lbs.
FW33N918YL00 9.2˝ 18.0˝ 51˝ 9° 12° 589 lbs.
FW33N930YL00 9.2˝ 30.0˝ 63˝ 9° 12° 623 lbs.
FW33N942YL00 9.2˝ 42.0˝ 75˝ 9° 12° 656 lbs.

62 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Holland Fifth Wheel – Assembly Dimensions

FW33 ILS™ Sliding No-Tilt FW33 Stationary KOMPENSATOR®

Inboard for Angle Mounting Outboard Plate Mount

40.0"
(1016) 1.4" 3.0"
(35) (76)
"A"

4.0" TYP.
(102)
30.0"
(762)
35.5”
(902)

37.3"
(946)
“SLIDE LENGTH” 15.7”
(399) 13.5" 19.0"
(343) (483)

13.5” 19.0”
(343) (484) “B” “A” “HEIGHT”
“B”
“C”
“HEIGHT”

SLIDE PART NUMBER HEIGHT A B WEIGHT

PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW33K000YL00 10.2˝ 19° 19º 600 lbs.
FW33N906WL00 9.2˝ 6.0˝ 39˝ 9° 12° 535 lbs. FW33K200YL00 12.2˝ 19º 19º 665 lbs.
FW33N918WL00 9.2˝ 18.0˝ 51˝ 9° 12° 565 lbs. FW33K300YL00 13.2˝ 19º 19º 674 lbs.
FW33N930WL00 9.2˝ 30.0˝ 63˝ 9° 12° 593 lbs.
FW33N942WL00 9.2˝ 42.0˝ 75˝ 9° 12° 621 lbs.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 63

Holland Fifth Wheel – Assembly Dimensions

FW33 Sliding KOMPENSATOR®

Inboard for Angle Mounting

“A”

40° 37.0˝
(940)

“SLIDE 10.4˝
LENGTH” (264)

13.5˝ 19.1˝
(343) (484)

“C”
“B”
“HEIGHT”

SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW33K311ZL00 13.3˝ 10.7˝ 38.9˝ 26° 22° 777 lbs.
FW33K317ZL00 13.3˝ 16.8˝ 45.0˝ 26° 22° 796 lbs.
FW33K325ZL00 13.3˝ 24.5˝ 52.6˝ 26° 22° 853 lbs.
FW33K341ZL00 13.3˝ 41.3˝ 69.5˝ 26° 22° 937 lbs.
FW33K354ZL00 13.3˝ 53.6˝ 82.0˝ 26° 22° 1011 lbs.
FW33K366ZL00 13.3˝ 65.8˝ 94.0˝ 26° 22° 1076 lbs.

64 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Holland Fifth Wheel – Assembly Dimensions

FW31 Stationary FW31 Stationary

Foot Mount Integrated Plate Mount

39.9” 40.0”
(1013) (1016)

1.3”
(32)

18.0” 4.0”
(457) (102) 18.5”
(470)
16.0”
(406)

40° 40°

36.8” 37.3”
(935) (946)

13.5” 19.0” 13.5” 19.0”

(343) (484) (343) (484)

"B" "A" "B" "A"

"HEIGHT" "HEIGHT"

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT A B WEIGHT

FW31Y600XL00 6.0˝ 8° 8º 321 lbs. FW31Z600XL00 6.0˝ 8° 8º 337 lbs.
FW31Y700XL00 7.0˝ 11º 11º 327 lbs. FW31Z700XL00 7.0˝ 11º 11º 345 lbs.
FW31Y800XL00 8.0˝ 14º 14º 332 lbs. FW31Z800XL00 8.0˝ 14º 14º 352 lbs.
FW31Y900XL00 9.0˝ 17º 17º 337 lbs. FW31Z900XL00 9.0˝ 17º 17º 348 lbs.
Corrugated Plate Option adds .9˝ to height.
A flat or corrugated mounting plate is required for foot
mount brackets. 6.0˝ height requires a cutout in the
mounting plate for proper articulation. Refer to Fifth Wheel
Installation Manual (XL-FW10008IM) for specifications.
Weights include mounting brackets only, and do not include
weight of mounting plate.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 65

HOLLAND Fifth Wheel – Assembly Dimensions

FW31 Stationary Brackets FW31 Stationary Brackets

for Angle Mounting with Angle Mounting

"FRAME WIDTH"

36.0”
(914)

40°
40°
33.2”
(843) 4.0”
(102)

13.5” 19.0” 13.5” 19.0”

(343) (484) (343) (484)

"B" "A" "B"

"HEIGHT" "A"
"HEIGHT"

4.0”
(102)
PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT A B WEIGHT
FW31X600XL00 5.6˝ 8° 8º 292 lbs. FW31W600GL00 6.0˝ 8° 8º 350 lbs.
FW31X700XL00 6.6˝ 11º 11º 298 lbs. FW31W700GL00 7.0˝ 11º 11º 356 lbs.
FW31X800XL00 7.6˝ 14º 14º 303 lbs. FW31W800GL00 8.0˝ 14º 14º 361 lbs.
FW31X900XL00 8.6˝ 17º 17º 308 lbs. FW31W900GL00 9.0˝ 17º 17º 366 lbs.

FRAME FRAME FRAME

WIDTH CODE WIDTH CODE WIDTH CODE
33.25˝ A 33.75˝ E 34.25˝ J
33.38˝ B 33.88˝ F 34.38˝ K
33.50˝ C 34.00˝ G 34.50˝ L
33.62˝ D 34.12˝ H

66 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 HOLLAND Fifth Wheel – Assembly Dimensions

FW31 ILS™ Outboard FW31 ILS™ Inboard

Sliding Mount Sliding Mount

40.0”
(1016) "A"

37.3”
(946) 35.5”
(902)
40° 39.5”
40°
(1003)

"SLIDE LENGTH" 9.8”

4.0” "SLIDE LENGTH" 9.8” (248)
(102) (248)
"A"

13.5” 19.0” 13.5” 19.0”

(343) (484) (343) (484)
"C" "B""HEIGHT" "C" "B"
"HEIGHT"

SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW31A712XL00 7.1˝ 12˝ 31˝ 8° 8° 439 lbs. FW31B712XL00 7.1˝ 12˝ 31˝ 8° 8° 424 lbs.
FW31A724XL00 7.1˝ 24˝ 43˝ 8° 8° 472 lbs. FW31B724XL00 7.1˝ 24˝ 43˝ 8° 8° 452 lbs.
FW31A736XL00 7.1˝ 36˝ 55˝ 8° 8° 506 lbs. FW31B736XL00 7.1˝ 36˝ 55˝ 8° 8° 480 lbs.
FW31A748XL00 7.1˝ 48˝ 67˝ 8° 8° 539 lbs. FW31B748XL00 7.1˝ 48˝ 67˝ 8° 8° 508 lbs.
FW31A812XL00 8.1˝ 12˝ 31˝ 12° 10° 443 lbs. FW31B812XL00 8.1˝ 12˝ 31˝ 12° 10° 429 lbs.
FW31A824XL00 8.1˝ 24˝ 43˝ 12° 10° 477 lbs. FW31B824XL00 8.1˝ 24˝ 43˝ 12° 10° 457 lbs.
FW31A836XL00 8.1˝ 36˝ 55˝ 12° 10° 511 lbs. FW31B836XL00 8.1˝ 36˝ 55˝ 12° 10° 485 lbs.
FW31A848XL00 8.1˝ 48˝ 67˝ 12° 10° 544 lbs. FW31B848XL00 8.1˝ 48˝ 67˝ 12° 10° 513 lbs.
FW31A912XL00 9.1˝ 12˝ 31˝ 15° 12° 447 lbs. FW31B912XL00 9.1˝ 12˝ 31˝ 15° 12° 433 lbs.
FW31A924XL00 9.1˝ 24˝ 43˝ 15° 12° 481 lbs. FW31B924XL00 9.1˝ 24˝ 43˝ 15° 12° 461 lbs.
FW31A936XL00 9.1˝ 36˝ 55˝ 15° 12° 514 lbs. FW31B936XL00 9.1˝ 36˝ 55˝ 15° 12° 489 lbs.
FW31A948XL00 9.1˝ 48˝ 67˝ 15° 12° 548 lbs. FW31B948XL00 9.1˝ 48˝ 67˝ 15° 12° 517 lbs.
FW31A012XL00 10.1˝ 12˝ 31˝ 15° 15° 459 lbs. FW31B012XL00 10.1˝ 12˝ 31˝ 15° 15° 445 lbs.
FW31A024XL00 10.1˝ 24˝ 43˝ 15° 15° 493 lbs. FW31B024XL00 10.1˝ 24˝ 43˝ 15° 15° 473 lbs.
FW31A036XL00 10.1˝ 36˝ 55˝ 15° 15° 526 lbs. FW31B036XL00 10.1˝ 36˝ 55˝ 15° 15° 501 lbs.
FW31A048XL00 10.1˝ 48˝ 67˝ 15° 15° 560 lbs. FW31B048XL00 10.1˝ 48˝ 67˝ 15° 15° 529 lbs.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 67

HOLLAND Fifth Wheel – Assembly Dimensions

FW17 Stationary FW17 Stationary

Foot Mount Integrated Plate Mount

39.9” 40.0”
(1013) (1016)
1.3”
(32)

4.0”
16.0” (102)
(406) 18.0”
(457) 18.5”
(470)

40° 40°

36.8” 37.3”
(935) (946)

10.6” 15.2” 10.6” 15.2”

(270) (387) (270) (387)

"B" "A" "B" "A"

"HEIGHT" "HEIGHT"

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT A B WEIGHT

FW17Y600XL00 5.8˝ 8° 8º 272 lbs. FW17Z600XL00 5.8˝ 8° 8º 288 lbs.
FW17Y700XL00 6.8˝ 11º 11º 278 lbs. FW17Z700XL00 6.8˝ 11º 11º 296 lbs.
FW17Y800XL00 7.8˝ 14º 14º 283 lbs. FW17Z800XL00 7.8˝ 14º 14º 303 lbs.
FW17Y900XL00 8.8˝ 17º 17º 288 lbs. FW17Z900XL00 8.8˝ 17º 17º 299 lbs.
Corrugated Plate Option adds .9˝ to height.
A flat or corrugated mounting plate is required for foot
mount brackets.
Weights include mounting brackets only, and do not
include weight of mounting plate.

68 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 HOLLAND Fifth Wheel – Assembly Dimensions

FW17 Stationary Brackets FW17 Stationary Brackets

for Angle Mounting with Angle Mounting

"FRAME WIDTH"

36.0”
(914)

40° 40°

33.2”
(843)
4.0”
(102)
10.6” 15.2” 10.6” 15.2”
(270) (387) (270) (387)

"B" "A" "B" "A"

"HEIGHT" "HEIGHT"

4.0”
(102)

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT A B WEIGHT

FW17X600XL00 5.4˝ 8° 8º 243 lbs. FW17W600GL00 5.8˝ 8° 8º 301 lbs.
FW17X700XL00 6.4˝ 11º 11º 249 lbs. FW17W700GL00 6.8˝ 11º 11º 307 lbs.
FW17X800XL00 7.4˝ 14º 14º 254 lbs. FW17W800GL00 7.8˝ 14º 14º 312 lbs.
FW17X900XL00 8.4˝ 17º 17º 259 lbs. FW17W900GL00 8.8˝ 17º 17º 317 lbs.

FRAME FRAME FRAME

WIDTH CODE WIDTH CODE WIDTH CODE
33.25˝ A 33.75˝ E 34.25˝ J
33.38˝ B 33.88˝ F 34.38˝ K
33.50˝ C 34.00˝ G 34.50˝ L
33.62˝ D 34.12˝ H

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 69

HOLLAND Fifth Wheel – Assembly Dimensions

FW17 ILS™ Outboard FW17 ILS™ Inboard

Sliding Mount Sliding Mount

40.0”
(1016) "A"

37.3”
(946) 35.5”
40° 40° (902)
39.5”
(1003)

"SLIDE LENGTH" 9.8”

4.0” 9.8” (248)
(102) "SLIDE LENGTH"
(248)
"A"

10.6” 15.2” 10.6” 15.2”

(270) (387) (270) (387)
"C" "B" "C" "B"
"HEIGHT" "HEIGHT"

SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW17A712XL00 6.8˝ 12˝ 31˝ 8° 8° 390 lbs. FW17B712XL00 6.8˝ 12˝ 31˝ 8° 8° 375 lbs.
FW17A724XL00 6.8˝ 24˝ 43˝ 8° 8° 423 lbs. FW17B724XL00 6.8˝ 24˝ 43˝ 8° 8° 403 lbs.
FW17A736XL00 6.8˝ 36˝ 55˝ 8° 8° 457 lbs. FW17B736XL00 6.8˝ 36˝ 55˝ 8° 8° 431 lbs.
FW17A748XL00 6.8˝ 48˝ 67˝ 8° 8° 490 lbs. FW17B748XL00 6.8˝ 48˝ 67˝ 8° 8° 459 lbs.
FW17A812XL00 7.8˝ 12˝ 31˝ 12° 10° 394 lbs. FW17B812XL00 7.8˝ 12˝ 31˝ 12° 10° 380 lbs.
FW17A824XL00 7.8˝ 24˝ 43˝ 12° 10° 428 lbs. FW17B824XL00 7.8˝ 24˝ 43˝ 12° 10° 408 lbs.
FW17A836XL00 7.8˝ 36˝ 55˝ 12° 10° 462 lbs. FW17B836XL00 7.8˝ 36˝ 55˝ 12° 10° 436 lbs.
FW17A848XL00 7.8˝ 48˝ 67˝ 12° 10° 495 lbs. FW17B848XL00 7.8˝ 48˝ 67˝ 12° 10° 464 lbs.
FW17A912XL00 8.8˝ 12˝ 31˝ 15° 12° 398 lbs. FW17B912XL00 8.8˝ 12˝ 31˝ 15° 12° 384 lbs.
FW17A924XL00 8.8˝ 24˝ 43˝ 15° 12° 432 lbs. FW17B924XL00 8.8˝ 24˝ 43˝ 15° 12° 412 lbs.
FW17A936XL00 8.8˝ 36˝ 55˝ 15° 12° 465 lbs. FW17B936XL00 8.8˝ 36˝ 55˝ 15° 12° 440 lbs.
FW17A948XL00 8.8˝ 48˝ 67˝ 15° 12° 499 lbs. FW17B948XL00 8.8˝ 48˝ 67˝ 15° 12° 468 lbs.
FW17A012XL00 9.8˝ 12˝ 31˝ 15° 15° 410 lbs. FW17B012XL00 9.8˝ 12˝ 31˝ 15° 15° 396 lbs.
FW17A024XL00 9.8˝ 24˝ 43˝ 15° 15° 444 lbs. FW17B024XL00 9.8˝ 24˝ 43˝ 15° 15° 424 lbs.
FW17A036XL00 9.8˝ 36˝ 55˝ 15° 15° 477 lbs. FW17B036XL00 9.8˝ 36˝ 55˝ 15° 15° 452 lbs.
FW17A048XL00 9.8˝ 48˝ 67˝ 15° 15° 511 lbs. FW17B048XL00 9.8˝ 48˝ 67˝ 15° 15° 480 lbs.

70 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 HOLLAND Fifth Wheel – Assembly Dimensions

FW16 Stationary FW16 Stationary Brackets

Integrated Plate Mount for Angle Mounting

40.0”
(1016)

1.3”
(32)

4.0”
(102) 16.2˝ (411)

18.5”
(470)

40°
40°

37.3” 33.2”
(946) (843)

10.6” 15.2”
11.0” 15.2” (280) (387)
(280) (386)

"B" "A"
"B" "A" "HEIGHT"
"HEIGHT"

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT A B WEIGHT

FW16Z600XL00 6.0˝ 8° 8º 284 lbs. FW16X600XL00 5.6˝ 8° 8º 239 lbs.
FW16Z700XL00 7.0˝ 11º 11º 292 lbs. FW16X700XL00 6.6˝ 11º 11º 245 lbs.
FW16Z800XL00 8.0˝ 14º 14º 299 lbs. FW16X800XL00 7.6˝ 14º 14º 250 lbs.
FW16Z900XL00 9.0˝ 17º 17º 295 lbs. FW16X900XL00 8.6 17º 17º 255 lbs.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 71

Holland Fifth Wheel – Assembly Dimensions

FW16 Stationary Brackets FW16 ILS™ Outboard

with Angle Mounting Sliding Mount

"FRAME WIDTH" 40.0”

(1016)

16.2˝ 36.0” 37.3”

(411) (914) (946)
40°
39.5”
(1003)

40°
2.8˝ (71)
33.2˝ (843) 4.0”
4.0” "SLIDE LENGTH" 9.8”
(102) (102) (248)
11.0” 15.2” "A"
(280) (387)

10.6” 15.2”
"B" "A" (270) (387)
"HEIGHT"
"C" "B"
"HEIGHT"
4.0”
(102)

PART NUMBER HEIGHT A B WEIGHT SLIDE

PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW16W600GL00 6.0˝ 8° 8º 297 lbs.
FW16W700GL00 7.0˝ 11º 11º 303 lbs. FW16A712XL00 7.1˝ 12˝ 31˝ 8° 8° 386 lbs.
FW16A724XL00 7.1˝ 24˝ 43˝ 8° 8° 419 lbs.
FW16W800GL00 8.0˝ 14º 14º 308 lbs.
FW16A736XL00 7.1˝ 36˝ 55˝ 8° 8° 453 lbs.
FW16W900GL00 9.0˝ 17º 17º 313 lbs.
FW16A748XL00 7.1˝ 48˝ 67˝ 8° 8° 486 lbs.
FW16A812XL00 8.1˝ 12˝ 31˝ 12° 10° 390 lbs.
FW16A824XL00 8.1˝ 24˝ 43˝ 12° 10° 424 lbs.
FRAME FRAME FRAME FW16A836XL00 8.1˝ 36˝ 55˝ 12° 10° 458 lbs.
WIDTH CODE WIDTH CODE WIDTH CODE
FW16A848XL00 8.1˝ 48˝ 67˝ 12° 10° 491 lbs.
33.25˝ A 33.75˝ E 34.25˝ J
FW16A912XL00 9.1˝ 12˝ 31˝ 15° 12° 394 lbs.
33.38˝ B 33.88˝ F 34.38˝ K FW16A924XL00 9.1˝ 24˝ 43˝ 15° 12° 428 lbs.
33.50˝ C 34.00˝ G 34.50˝ L FW16A936XL00 9.1˝ 36˝ 55˝ 15° 12° 461 lbs.
33.62˝ D 34.12˝ H FW16A948XL00 9.1˝ 48˝ 67˝ 15° 12° 494 lbs.
FW16A012XL00 10.1˝ 12˝ 31˝ 15° 15° 406 lbs.
FW16A024XL00 10.1˝ 24˝ 43˝ 15° 15° 440 lbs.
FW16A036XL00 10.1˝ 36˝ 55˝ 15° 15° 473 lbs.
FW16A048XL00 10.1˝ 48˝ 67˝ 15° 15° 506 lbs.

72 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Holland Fifth Wheel – Assembly Dimensions

FW16 ILS™ Inboard

Sliding Mount

35.5”
40° (902)

"SLIDE LENGTH" 9.7”

(248)
"A"

11.1” 15.2”
(280) (387)
"C" "B"
"HEIGHT"

SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW16B712XL00 7.1˝ 12˝ 31˝ 8° 8° 371 lbs.
FW16B724XL00 7.1˝ 24˝ 43˝ 8° 8° 399 lbs.
FW16B736XL00 7.1˝ 36˝ 55˝ 8° 8° 427 lbs.
FW16B748XL00 7.1˝ 48˝ 67˝ 8° 8° 455 lbs.
FW16B812XL00 8.1˝ 12˝ 31˝ 12° 10° 376 lbs.
FW16B824XL00 8.1˝ 24˝ 43˝ 12° 10° 404 lbs.
FW16B836XL00 8.1˝ 36˝ 55˝ 12° 10° 432 lbs.
FW16B848XL00 8.1˝ 48˝ 67˝ 12° 10° 460 lbs.
FW16B912XL00 9.1˝ 12˝ 31˝ 15° 12° 380 lbs.
FW16B924XL00 9.1˝ 24˝ 43˝ 15° 12° 408 lbs.
FW16B936XL00 9.1˝ 36˝ 55˝ 15° 12° 436 lbs.
FW16B948XL00 9.1˝ 48˝ 67˝ 15° 12° 464 lbs.
FW16B012XL00 10.1˝ 12˝ 31˝ 15° 15° 392 lbs.
FW16B024XL00 10.1˝ 24˝ 43˝ 15° 15° 420 lbs.
FW16B036XL00 10.1˝ 36˝ 55˝ 15° 15° 448 lbs.
FW16B048XL00 10.1˝ 48˝ 67˝ 15° 15° 476 lbs.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 73

Holland Fifth Wheel – Assembly Dimensions

FWAL Stationary FWAL Stationary

Foot Mount Integrated Plate Mount

39.9” 40.0”
(1013) (1016)

1.3”
(32)

18.0” 4.0”
(457) (102)
18.5”
16.0” (470)
(406)

40°
40.0°
36.8”
(935) 37.3”
(946)

13.5” 17.0” 13.5” 17.0”

(343) (432) (343) (432)

"B" "A" "B" "A"

"HEIGHT" "HEIGHT"

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT A B WEIGHT

FWALY600XL00 6.3˝ 7° 7º 227 lbs. FWALZ600XL00 6.3˝ 7° 7º 243 lbs.
FWALY700XL00 7.3˝ 8º 8º 233 lbs. FWALZ700XL00 7.3˝ 8º 8º 251 lbs.
FWALY800XL00 8.3˝ 10º 9º 238 lbs. FWALZ800XL00 8.3˝ 10º 9º 258 lbs.
FWALY900XL00 9.3˝ 14º 13º 243 lbs. FWALZ900XL00 9.3˝ 14º 13º 254 lbs.
Corrugated Plate Option adds .9˝ to height.
A flat or corrugated mounting plate is required for foot
mount brackets.
Weights include mounting brackets only, and do not
include weight of mounting plate.

74 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Holland Fifth Wheel – Assembly Dimensions

FWAL Stationary Brackets FWAL Stationary Brackets

for Angle Mounting with Angle Mounting

FRAME WIDTH

36.0”
(914)

40.0° 40°

33.2” 4.0”
(843) (102)

13.5” 17.0” 13.5” 17.0”

(343) (432) (343) (432)

"B" "A" "B" "A"

"HEIGHT" "HEIGHT"

4.0”
(102)

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT A B WEIGHT

FWALX600XL00 5.9˝ 7° 7º 198 lbs. FWALW600GL00 6.3˝ 7° 7º 256 lbs.
FWALX700XL00 6.9˝ 8º 8º 204 lbs. FWALW700GL00 7.3˝ 8º 8º 262 lbs.
FWALX800XL00 7.9˝ 10º 9º 209 lbs. FWALW800GL00 8.3˝ 10º 9º 267 lbs.
FWALX900XL00 8.9˝ 14º 13º 214 lbs. FWALW900GL00 9.3˝ 14º 13º 272 lbs.

FRAME FRAME FRAME

WIDTH CODE WIDTH CODE WIDTH CODE
33.25˝ A 33.75˝ E 34.25˝ J
33.38˝ B 33.88˝ F 34.38˝ K
33.50˝ C 34.00˝ G 34.50˝ L
33.62˝ D 34.12˝ H

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 75

HOLLAND Fifth Wheel – Assembly Dimensions

FWAL ILS™ Outboard FWAL ILS™ Inboard

Sliding Mount Sliding Mount

40.0” "A"
(1016)

40° 37.3” 35.5”

(946) 40° (902)

39.5”
(1003)

“SLIDE LENGTH” 9.8”

4.0” 9.8” (248)
(102) "SLIDE LENGTH"
(248)
"A"

13.5” 17.0” 13.5” 17.0”

(343) (432) (343) (432)

"C" "B" "C" "B"

"HEIGHT" "HEIGHT"

SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT
FWALA712XL00 7.3˝ 12˝ 31˝ 8° 9° 345 lbs. FWALB712XL00 7.3˝ 12˝ 31˝ 8° 9° 330 lbs.
FWALA724XL00 7.3˝ 24˝ 43˝ 8° 9° 378 lbs. FWALB724XL00 7.3˝ 24˝ 43˝ 8° 9° 358 lbs.
FWALA736XL00 7.3˝ 36˝ 55˝ 8° 9° 412 lbs. FWALB736XL00 7.3˝ 36˝ 55˝ 8° 9° 386 lbs.
FWALA748XL00 7.3˝ 48˝ 67˝ 8° 9° 445 lbs. FWALB748XL00 7.3˝ 48˝ 67˝ 8° 9° 414 lbs.
FWALA812XL00 8.3˝ 12˝ 31˝ 13° 18° 349 lbs. FWALB812XL00 8.3˝ 12˝ 31˝ 13° 18° 335 lbs.
FWALA824XL00 8.3˝ 24˝ 43˝ 13° 18° 383 lbs. FWALB824XL00 8.3˝ 24˝ 43˝ 13° 18° 363 lbs.
FWALA836XL00 8.3˝ 36˝ 55˝ 13° 18° 417 lbs. FWALB836XL00 8.3˝ 36˝ 55˝ 13° 18° 391 lbs.
FWALA848XL00 8.3˝ 48˝ 67˝ 13° 18° 450 lbs. FWALB848XL00 8.3˝ 48˝ 67˝ 13° 18° 419 lbs.
FWALA912XL00 9.3˝ 12˝ 31˝ 15° 20° 353 lbs. FWALB912XL00 9.3˝ 12˝ 31˝ 15° 20° 339 lbs.
FWALA924XL00 9.3˝ 24˝ 43˝ 15° 20° 387 lbs. FWALB924XL00 9.3˝ 24˝ 43˝ 15° 20° 367 lbs.
FWALA936XL00 9.3˝ 36˝ 55˝ 15° 20° 420 lbs. FWALB936XL00 9.3˝ 36˝ 55˝ 15° 20° 395 lbs.
FWALA948XL00 9.3˝ 48˝ 67˝ 15° 20° 454 lbs. FWALB948XL00 9.3˝ 48˝ 67˝ 15° 20° 423 lbs.
FWALA012XL00 10.3˝ 12˝ 31˝ 15° 15° 365 lbs. FWALB012XL00 10.3˝ 12˝ 31˝ 15° 15° 351 lbs.
FWALA024XL00 10.3˝ 24˝ 43˝ 15° 15° 399 lbs. FWALB024XL00 10.3˝ 24˝ 43˝ 15° 15° 379 lbs.
FWALA036XL00 10.3˝ 36˝ 55˝ 15° 15° 432 lbs. FWALB036XL00 10.3˝ 36˝ 55˝ 15° 15° 407 lbs.
FWALA048XL00 10.3˝ 48˝ 67˝ 15° 15° 466 lbs. FWALB048XL00 10.3˝ 48˝ 67˝ 15° 15° 435 lbs.

76 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 HOLLAND Fifth Wheel – Assembly Dimensions

FW0070 Stationary FW0070 Stationary

Foot Mount Integrated Plate Mount

40.0” 40.0” 1.4”

(1016) (1016) (35) 2.0”
22.9” 37.3”
(581) (946) (51)

13.0”
(330) 4.0”
(102)
28.0”
26.0” (711)
(660)

45˚ 45˚

13.6” 17.9”
(344) (456) 13.6” 17.9”
(344) (456)

"B" "A" "B" "A"

"HEIGHT" "HEIGHT"

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT A B WEIGHT

FW0070-7603XL 7.0˝ 10° 11º 412 lbs. FW0070-7685XL 7.0˝ 10 ° 6º 533 lbs.
FW0070-7602XL 8.0˝ 15º 15º 419 lbs. FW0070-7684XL 8.0˝ 14º 15º 539 lbs.
FW0070-7601XL 9.0˝ 15º 15º 421 lbs. FW0070-7683XL 9.0˝ 15º 15º 542 lbs.

Corrugated Plate Option adds .9˝ to height.

A flat or corrugated mounting plate is required for foot
mount brackets.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 77

HOLLAND Fifth Wheel – Assembly Dimensions

FW0070 Stationary Brackets FW0070 Stationary Brackets

for Angle Mounting with Angle Mounting

33.9” "FRAME WIDTH"

(861)

18.0”
(457)

14.0” 36.0”
(356) (914)

45˚ 45˚

13.6” 17.9” 13.6” 17.9”

(344) (456) (344) (456)

"B" "A" "B" "A"

"HEIGHT" "HEIGHT"

4.0˝
(102)

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT A B WEIGHT

FW0070-7623XL 6.5˝ 12° 11º 373 lbs. FW0070-7614GL 6.0˝ 8° 5º 441 lbs.
FW0070-7622XL 7.5˝ 15º 15º 380 lbs. FW0070-7613GL 7.0˝ 12º 11º 450 lbs.
FW0070-7621XL 8.5˝ 15º 15º 382 lbs. FW0070-7612GL 8.0˝ 15º 15º 457 lbs.
FW0070-7611GL 9.0˝ 15º 15º 459 lbs.

FRAME FRAME FRAME

WIDTH CODE WIDTH CODE WIDTH CODE
33.25˝ A 33.75˝ E 34.25˝ J
33.38˝ B 33.88˝ F 34.38˝ K
33.50˝ C 34.00˝ G 34.50˝ L
33.62˝ D 34.12˝ H

78 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 HOLLAND Fifth Wheel – Assembly Dimensions

FW2570 Inboard
Sliding Mount

"A"
HOLLAND

37.0”
45˚ (940)

"SLIDE LENGTH" 8.7”

(220)

13.6” 17.9”
(344) (456)

"C"
"B"
"HEIGHT"

SLIDE
PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW2570-7103X1L 8.0˝ 10.7˝ 38.9˝ 12° 8° 850 lbs.
FW2570-7103X2L 8.0˝ 16.8˝ 45.0˝ 12° 8° 870 lbs.
FW2570-7103Z3L 8.0˝ 24.5˝ 52.6˝ 12° 8° 890 lbs.
FW2570-7103X4L 8.0˝ 41.3˝ 69.5˝ 12° 8° 930 lbs.
FW2570-7103X5L 8.0˝ 53.6˝ 82.0˝ 12° 8° 970 lbs.
FW2570-7103X6L 8.0˝ 65.8˝ 94.0˝ 12° 8° 1010 lbs.
FW2570-7102X1L 9.0˝ 10.8˝ 38.9˝ 17° 10° 855 lbs.
FW2570-7102X2L 9.0˝ 16.8˝ 45.0˝ 17° 10° 875 lbs.
FW2570-7102Z3L 9.0˝ 24.5˝ 52.6˝ 17° 10° 895 lbs.
FW2570-7102X4L 9.0˝ 41.3˝ 69.5˝ 17° 10° 935 lbs.
FW2570-7102X5L 9.0˝ 53.6˝ 82.0˝ 17° 10° 975 lbs.
FW2570-7102X6L 9.0˝ 65.8˝ 94.0˝ 17° 10° 1015 lbs.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 79

HOLLAND Fifth Wheel – Assembly Dimensions

FW7040 Stationary KOMPENSATOR® FW7090 Sliding KOMPENSATOR®

Outboard Mount for Angle Mounting

37.3 1.4˝
(946) (35) 2.0˝ “A”
(51)

4.0˝
HOLLAND (102)

45˚ 37.0˝

HOLLAND
36.0˝
(914) (940)

46° “SLIDE 10.4

LENGTH” (264)
40.0˝
(1016)
13.6” 17.9˝
13.6˝ 17.9˝ (344) (456)
(344) (456)
“C” “B”
“B” “A”
“HEIGHT” “HEIGHT”

PART NUMBER HEIGHT A B WEIGHT SLIDE

PART NUMBER HEIGHT LENGTH A B C WEIGHT
FW7040-7779XL 9.9˝ 15° 15º 749 lbs.
FW7040-7777XL 11.9˝ 19º 15º 821 lbs. FW7090-7251X1L 12.9˝ 10.7˝ 38.9˝ 15° 15° 910 lbs.
FW7040-7776XL 12.9˝ 15º 15º 836 lbs. FW7090-7251X2L 12.9˝ 16.8˝ 45.0˝ 15° 15° 960 lbs.
FW7090-7251Z3L 12.9˝ 24.5˝ 52.6˝ 15° 15° 1005 lbs.
FW7090-7251X4L 12.9˝ 41.3˝ 69.5˝ 15° 15° 1105 lbs.
FW7090-7251X5L 12.9˝ 53.6˝ 82.0˝ 15° 15° 1205 lbs.
FW7090-7251X6L 12.9˝ 65.8˝ 94.0˝ 15° 15° 1305 lbs.

80 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 HOLLAND Fifth Wheel – Assembly Dimensions

FW0100 Stationary Mount FW0165 Stationary Mount

37.6˝ 37.6˝
(956) (956)

18.0˝ 18.0˝
(457) (457)

45° 45°

13.6˝ 20.0˝
13.6˝ 20.0˝ (345) (508)
(345) (508)

“B” “A” “HEIGHT” 24° 19°

“HEIGHT”

4.5˝ 4.5˝
(114) (114)

PART NUMBER HEIGHT A B WEIGHT PART NUMBER HEIGHT WEIGHT

FW0100-DC 9.0˝ 15° 16º 590 lbs. FW0165-0091-1 10.5˝ 650 lbs.
FW0100-D 10.5˝ 19º 24º 595 lbs.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 81

HOLLAND Fifth Wheel – Assembly Dimensions

FW2080 Stationary Mount

38.0˝
(965) 27.4˝
(695)

17.0˝
(432)
L 19.0˝
(483)

45˚
40.0˝
(1016)
13.6˝ 20.0˝
(344) (508)

“HEIGHT”

PART NUMBER HEIGHT WEIGHT

FW2080-D 13.6˝ 860 lbs.

82 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

GLOSSARY
Glossary

Articulation B-Train
Rotation about an axis. Generally referring to the fore/ A combination of two or more trailers in which the rear
aft rotational movement between the fifth wheel and its semi-trailer(s) is connected with a single pivot point,
mounting (See ˝Oscillation˝). commonly a fifth wheel, mounted on an extension of
the frame of the lead trailer. (Figure 2).
A-Train
A combination of two or more trailers in which the dolly Pivot Point

(converter or turntable) is connected by a single pintle

hook or coupler, and the drawbar connection is at the
center between each vehicle. The resulting connection
has two pivot points. (Figure 1).
Pivot Point
Figure 2

Bogie
The axle spring, suspension arrangement on the rear of
a tandem axle tractor.
Figure 1
Bolster Plate
Air Operated Lock Release The flat, load-bearing surface under the front of a
The release mechanism for opening the lock mechanism semi-trailer, including the kingpin, which rests firmly
of the fifth wheel which is operated from the cab of upon the fifth wheel when coupled. The bolster plate
a tractor. The driver sets the tractor parking brake to is sometimes referred to as an upper coupler.
activate the system. The driver then pulls the air control
Bolster Plate Height
valve switch to activate a pneumatic cylinder on the fifth
The height from the ground to the bolster plate when
wheel to open the locks.
the trailer is level and unlade.
Air Slide Release
C-Train
The release mechanism for a sliding fifth wheel which
A combination of two or more trailers in which the
is operated from the cab of a tractor by actuating an
dolly (converter or turntable) is connected to the trailer
air control valve. When actuated, the valve energizes
by means of two pintle hook or coupler-drawbar
an air cylinder, which releases the slide lock and permits
connections. The resulting connection has one pivot
re-positioning of the fifth wheel.
point. (See also ˝B Train˝)
Articulating Upper Coupler
Center-of-Gravity (c.g.)
A bolster plate – kingpin arrangement that is not rigidly
That point in a vehicle or body where the total weight
attached to the trailer, but provides articulation and/or
or mass could be considered to be concentrated.
oscillation (e.g. frameless dump) about an axis parallel
Used in conjunction with vehicle stability and weight
to the rear axle of the trailer.
distribution on its axles.
Axles, Numbering
City Pick-up and Delivery
When used in this guide to select a fifth wheel, the
Pick-up and delivery service within cities and/or
number of axles (for example, ˝Up to 4-axle trains˝)
suburban areas with typical distance between starts
refers to the total number of axles on the ˝towed
and stops of 3 miles or less.
vehicle(s)˝ or trailer(s). It does not include the axles on
the towing vehicle.

84 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Glossary

Converter Dolly General Over-the-Road Use

An axle, frame, drawbar and fifth wheel arrangement When used in this guide means, a fifth wheel
that converts a semi-trailer into a full trailer. that is designed for multiple standard duty
highway applications.
Drawbar Capacity
The maximum, horizontal pulling force that can be ILS™
safely applied to a coupling device. Integrated Low Weight Slider Mounting System

Extra Capacity Inboard Angle Mount

Generally refers to a coupling device which has strength The horizontal leg of the
capability greater than standard. mounting angle sits on
the tractor frame. (Figure 4).
Fifth Wheel Height
The distance from the ground to the top of the fifth Kingpin Figure 4
wheel when it is level and parallel with the ground. The pin mounted through the center of the trailer
It can also refer to the height from the tractor frame to upper coupler (bolster plate) that mates with the
the top of the fifth wheel. The latter definition applies fifth wheel locks securing the trailer to the fifth wheel.
to data given in fifth wheel literature. The configuration is controlled by industry standards.
See SAE J700 and SAE J848.
Fifth Wheel Top Plate
The portion of the fifth wheel assembly that contacts Kompensator® Mounting Base
the trailer bolster plate and houses the locking A mounting base designed to relieve some of the
mechanism that connects to the kingpin. torque and twist that is generated by some trailer
designs, thereby reducing or eliminating trailer frame
Frame Width
Frame cracks. Tractor tandem tire life is also greatly increased
The measurement across the Width
due to improved traction. The primary application for
outside of the frame rails of a
a Kompensator® mounted fifth wheel is for tankers in
tractor, truck or trailer. (Figure 3). Figure 3 which the c.g. does not exceed 44 inches above the top
Full Trailer surface of the fifth wheel.
A trailer which does not transfer load to the towing
LowLube
vehicle. It employs a towbar coupled to a swiveling
A fifth wheel with recesses cast into the top plate into
or steerable running gear assembly at the front of
which lube free inserts are attached to eliminate the
the trailer.
use of top plate grease. Also includes lube free inserts
Fully Oscillating Fifth Wheel between top plate and brackets to eliminate lubrication.
Generally refers to a fifth wheel type with fore/aft and
Mounting Bracket
side-to-side articulation. (See ˝Oscillation˝)
That portion of the fifth wheel assembly that connects
G.C.W. – Gross Combination Weight the fifth wheel top plate to the tractor frame or fifth
Gross vehicle weight of tractor plus the total weight of wheel mounting system.
the trailer and its load.
No-Tilt Convertible Fifth Wheel
G.T.W. – Gross Trailer Weight or Gross A fifth wheel that has fore/aft articulation which can be
Towed Weight locked out to produce a rigid top plate for applications
The sum of the weight of an empty trailer(s) and that have either rigid and/or articulating upper couplers.
its payload.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 85

Glossary

NoLube™ Roll Axis

A fifth wheel with recesses cast into the top plate into The theoretical line that joins the roll center of the front
which lube free inserts are attached to eliminate the use and rear axles.
of top plate grease. The entire locking system is treated
with special coatings that eliminate grease requirements. Roll Center
Also includes lube free inserts between the top plate The instant (always changing) center about which the
and brackets to eliminate lubrication in the bracket vehicle sprung mass rotates when lateral (rollover) forces
pocket area. are applied. Generally this is located at the fore/aft
center of the suspension at a height where the springs
Off-Road attach to the frame links. (Figure 6).
Refers to the terrain on which a tractor-trailer operates
which is unpaved and rough, or ungraded. Any terrain Secondary Lock
not considered part of the public highway system falls Refers to a component or components of a fifth wheel
under this heading. locking mechanism that may be included as a back-up
system for the primary locks. The
On-Road secondary lock is not required
Refers to the terrain on which a tractor-trailer operates for the fifth wheel to function
which is paved or a smooth graded surface, generally and can be either manually or Roll
considered to be part of the public highway system. Center
automatically applied. On some
designs, the engagement of
Oscillation
the secondary lock can only be Figure 6
Rotational movement in either fore/aft or side-to-
accomplished if the primary lock
side direction about a pivot point. Generally refers to
is properly engaged.
fifth wheel designs in which fore/aft and side-to-side
articulation are provided.
Semi-Trailer
Outboard Angle Mount A load carrying vehicle equipped with one or more axles
The horizontal leg of the mounting angle faces outward. and constructed so that its front end is supported on
(Figure 5). the fifth wheel of the truck tractor which pulls it.

Sliding Fifth Wheel

A specialized fifth wheel design which incorporates
provisions to readily relocate the kingpin center
forward and rearward affecting the weight distribution
Figure 5 on the tractor axles and/or overall length of the tractor
Rated Capacity and trailer.
The maximum, recommended safe load that can
be sustained by a component or assembly without Slide Travel
permanent damage. The distance that a sliding fifth wheel is designed to move.

Rigid Fifth Wheel Stability

A fifth wheel that is fixed rigidly to a frame. This fifth A relative measure of the handling characteristics which
wheel has no articulation or oscillation. Generally used provide the desired and safe operation of the vehicle
in applications where the articulation is provided by during various maneuvers.
other means, e.g., an articulating upper coupler of a
frameless dump.

86 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Glossary

Stationary Fifth Wheel

A fifth wheel whose location on the tractor frame is
fixed once it is installed.

Tilt Stop
A block or formed plate welded to a fifth wheel
mounting bracket that limits the rearward articulation
of the fifth wheel. Tilt stops are often used to keep the
fifth wheel from resting on or damaging the tractor
frame rails.

TTMA
Truck Trailer Manufacturers Association
1020 Princess Street, Alexandria, VA 22314-2247
Phone: (703) 549-3010 Fax: (703) 549-3014

TVW (Towed Vehicle Weight)

Total weight of towed vehicles.

Torque and Twist

Generally refers to the forces developed in the trailer
and/or tractor frame that are transmitted through the
fifth wheel when a rigid trailer (e.g. a tanker) is required
to negotiate bumps (i.e. street curbs, etc.).

Torsional Rigidity
A component’s ability to remain rigid when subjected
to twisting forces.

Universal Fifth Wheel

(See ˝Fully Oscillating Fifth Wheel˝)

Upper Coupler
(See ˝Bolster Plate˝)

Vertical Load Capacity

The maximum, recommended vertical force (down) that
can be safely applied to a coupling device.

XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc. 87

Notes

88 XL-FW10066SG-en-US Rev K 01-2016 Amendments and errors reserved. © SAF-HOLLAND, Inc.

 Never Settle for Less
Always specify SAF-HOLLAND Original Parts

Service parts for HOLLAND, SAF, NEWAY, and

former Binkley, Simplex, and Simplex Products.

From fifth wheel rebuild kits to suspension bushing repair kits, 

SAF-HOLLAND Original Parts are the same quality components used
in the original component assembly. SAF-HOLLAND Original Parts are
tested and designed to provide maximum performance and durability.
Will-fits, look-alikes or worse yet counterfeit parts will only limit the
performance potential and could possibly void SAF-HOLLAND’s warranty.
Always be sure to spec SAF-HOLLAND Original Parts when servicing
your SAF-HOLLAND product.

safholland.com
800.876.3929 52.55.5816.2230 519.537.3494
United States Mexico Canada
 SAF-HOLLAND is a leading supplier of highly efficient components, systems and service programs in

XL-FW10066SG-es-US Rev K · 2016-01-14 · Amendments and errors reserved ©SAF-HOLLAND, Inc.

SAF-HOLLAND, HOLLAND, SAF-HOLLAND Original Parts, NoLube and

SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

the global commercial vehicle industry. Our three core product brands are recognized for delivering

ILS (Integrated Low-Weight Slider System) logos are trademarks of

innovative solutions that optimize fleet operations in every corner of the world.

TRAILER AXLES AND COUPLING AND LIFTING SUSPENSIONS FOR

SUSPENSION SYSTEMS TECHNOLOGIES TRUCKS AND BUSES

With our team of over 3,000 employees and a worldwide network of over 9,000 service partners,
we serve our fleet customers with know-how and passion, and always focused on one target:
Engineering your road to success. Anywhere in the world. Under any conditions. 365 days a year.

HIGHLY EFFICIENT COMPONENTS AND SYSTEMS FOR TRUCKS AND TRAILERS

EUROPE l AMERICAS l AFRICA l ASIA l MIDDLE EAST l AUSTRALIA

safholland.com SAF-HOLLAND, Inc.

888.396.6501 Fax 800.356.3929

SAF-HOLLAND Canada Limited

519.537.3494 Fax 800.565.7753
Western Canada 604.574.7491 Fax 604.574.0244

SAF-HOLLAND International de México

Tel/Fax 52.55.5816.2230