Scribd
Upload
48 views2 pages

PENTEK@ Uv!!!

The Pentek UV Series systems use ultraviolet light to treat water in a safe, chemical-free method. They consist of a durable polypropylene housing containing a quartz sleeve that protects the UV lamp and maximizes transmittance. Some models have a stainless steel or carbon block insert to improve durability or reduce turbidity for maximum transmittance. The systems are available in different sizes and voltages to treat 1-15 gallons per minute and operate between 40-100°F.

Uploaded by

IIsrael Ffonseca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views2 pages

PENTEK@ Uv!!!

The Pentek UV Series systems use ultraviolet light to treat water in a safe, chemical-free method. They consist of a durable polypropylene housing containing a quartz sleeve that protects the UV lamp and maximizes transmittance. Some models have a stainless steel or carbon block insert to improve durability or reduce turbidity for maximum transmittance. The systems are available in different sizes and voltages to treat 1-15 gallons per minute and operate between 40-100°F.

Uploaded by

IIsrael Ffonseca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PENTEK UV SERIES

ULTRAVIOLET SYSTEMS

All Pentair Pentek UV Series Systems are constructed with a durable


polypropylene housing; a quartz sleeve to protect the lamp and provide
maximum UV transmittance; a UL-listed, voltage regulated control
module, mounting bracket and hardware.
UV-120 and UVBB Models are equipped with a stainless steel insert sleeve
to provide increased durability.
UVS-110 and UV-110 Systems are equipped with a CBU-10 carbon block
cartridge to provide the maximum UV transmittance through the water by
reducing turbidity.
UV Series Ultraviolet Systems are available in two sizes: 120 volt, 60
hertz; and 220/240 volt, 50 hertz. System flow rate range from 1-15 gpm
(3.8 - 57 Lpm).

FEATURES/BENEFITS

High-intensity UV output Produces a dose of UV light (16,000


microwatt-sec per square centimeter)
Positive alternative to environmentally
at a wavelength of 254 nanometers
harmful chemicals
Available in three different sizes and two
different voltages

SPECIFICATIONS

Maximum Temperature –
Housing – Polypropylene 40-100ºF (4.4-37.8ºC)

Cap – Polypropylene Reaction Chamber – Stainless steel


(20” models only)
UV Sleeve – Quartz
O-Rings – Buna-N

WATER QUALITY SYSTEMS PENTEK ULTRAVIOLET SYSTEMS

142
SPECIFICATIONS AND PERFORMANCE
RECOMMENDED MAXIMUM OPERATING
PART # MODEL # MAXIMUM DIMENSIONS VOLTAGE HERTZ
FLOW RATES PRESSURE

163004 UVS-110-2*† 5-1⁄2" x 15-1⁄2" (140 mm x 394 mm) 220 50 1 gpm (3.8 Lpm) 65 psi (4.5 bar)

163005 UV-110-1* 5-1⁄2” x 15-1⁄2" (140 mm x 394 mm) 120 60 2 gpm (7.6 Lpm) 65 psi (4.5 bar)

163006 UV-110-2* 5-1⁄2” x 15-1⁄2" (140 mm x 394 mm) 220 50 2 gpm (7.6 Lpm) 65 psi (4.5 bar)

163007 UV-120-1 5-1⁄2" x 25-1⁄2" (140 mm x 648 mm) 120 60 8 gpm (30.3 Lpm) 65 psi (4.5 bar)

163008 UV-120-2 5-1⁄2” x 25-1⁄2" (140 mm x 648 mm) 220 50 8 gpm (30.3 Lpm) 65 psi (4.5 bar)

163009 UVBB-120-1 7" x 29" (178 mm x 737 mm) 120 60 15 gpm (56.8 Lpm) 65 psi (4.5 bar)

163101 UVBB-120-2 7" x 29" (178 mm x 737 mm) 220 50 15 gpm (56.8 Lpm) 65 psi (4.5 bar)

* Supplied with a carbon block filter cartridge which reduces sediment, bad taste and odor.
†
For export sale only.

Germicidal Sun Tanning

Short Wave Middle Wave Long Wave


X-Ray Vacuum UV Visible Light
UV-C UV-B UV-A

100 200 254 300 400 800


Nanometers

Minimum Dose:* 16 mJ/cm2 (16,000 microwatt-sec per cm2)


Models UVS-110-1, UVS-110-2, UV-110-1 and UV-110-2 incorporate a carbon block cartridge (CBU-10) that surrounds the quartz
tube. This cartridge provides prefiltration that assures maximum transmittance of UV light through the water.
NOTE: Carbon block prefilters or other fine filtration can be plumbed in separately to provide this function for models UV-120
and UVBB-120.
*Determined by:
LAMP INTENSITY (microwatts) X TIME OF EXPOSURE IN REACTOR CHAMBER (sec)
÷ SURFACE AREA OF REACTOR CHAMBER (cm2) = microwatt • sec/cm2 = mJ/cm2/1000a

WATER QUALITY SYSTEMS PENTEK ULTRAVIOLET SYSTEMS

143

You might also like