1.5B-36/1.5BI-36/1.

5PLB-36 ROOF DECKS

LRFD
GRADE 80 STEEL

1.5B ROOF DECKS

• 1.5B-36 Deck used with Side-lap Screws
• 1.5BI-36 Deck used with TSWs or BPs
• 1.5PLB-36 Deck used with PunchLok® II System

Nominal Dimensions

Section Properties
Effective Moment
of Inertia Effective Vertical
Deck Base Metal Yield at Service Load Section Modulus Design Web
Weight Thickness Strength Id = (2Ie+Ig)/3 at Fy = 60 ksi Moment Shear
Deck wdd t Fy Id+ Id- Se+ Se- øMn+ øMn- øVn
Gage (psf) (in.) (ksi) (in /ft)
4
(in /ft)
4
(in /ft)
3
(in /ft)
3
(lb-ft/ft) (lb-ft/ft) (lb/ft)
24 1.3 0.0239 60 0.118 0.138 0.120 0.131 540 590 2357
22 1.6 0.0295 60 0.151 0.175 0.162 0.173 729 779 4842
20 2.0 0.0358 60 0.192 0.217 0.215 0.223 968 1004 5849
19 2.3 0.0418 60 0.232 0.254 0.263 0.271 1184 1220 6799
18 2.6 0.0474 60 0.272 0.290 0.302 0.315 1359 1418 7678

Design Reactions at Supports Based on Web Crippling, øRn (lb/ft)

Bearing Length of Webs
One-Flange Loading Two-Flange Loading
Deck End Bearing Interior Bearing End Bearing Interior Bearing
Gage 1½" 2" 3" 4" 3" 4" 1½" 2" 3" 4" 3" 4"
24 1005 1108 1281 1405 1781 1933 977 1057 1190 1285 2171 2371
22 1482 1629 1875 2047 2645 2859 1547 1666 1867 2007 3273 3559
20 2116 2318 2658 2889 3797 4087 2339 2511 2800 2997 4752 5143
19 2813 3074 3512 3803 5067 5432 3243 3472 3856 4111 6389 6888
18 3545 3865 4403 4751 6401 6839 4218 4505 4987 5300 8114 8718

Standard Features Optional Features

• ASTM A653 SS GR80, with G60 or G90, • Inquire regarding cost and lead times for:
white or gray primer optional -Short cuts < 6’-0”
• ASTM A1008 SS GR80 with gray primer -Sheet Lengths > 42’-0”
• Standard lengths – 6’-0” to 42’-0” -Alternative metallic and painted finishes
• IAPMO UES ER-0652, UL, and FM Listed • Web Perforated Acoustical Versions
• Tables conform to ANSI/SDI RD-2017

1.5B/1.5BI GR80 LRFD | SEPTEMBER 2020 WWW.VULCRAFT.COM

 1.5B-36/1.5BI-36/1.5PLB-36 ROOF DECKS

LRFD
GRADE 80 STEEL

Inward Uniform Design Loads, LRFD (psf)

Deck Span (ft-in.)
Gage Spans Criteria 2'-0" 3'-0" 4'-0" 5'-0" 6'-0" 7'-0" 8'-0" 9'-0" 10'-0" 11'-0" 12'-0"
øWn 1080 480 270 173 120 88 68 53 43 36 30
Single
L/240 967 287 121 62 36 23 15 11 8 6 4
øWn 1000 484 281 183 128 95 73 58 47 39 33
24 Double
L/240 2724 807 341 174 101 64 43 30 22 16 13
øWn 1179 586 345 226 159 118 91 72 58 48 41
Triple
L/240 2135 633 267 137 79 50 33 23 17 13 10
øWn 1458 648 365 233 162 119 91 72 58 48 41
Single
L/240 1237 367 155 79 46 29 19 14 10 7 6
øWn 1445 668 382 246 171 126 97 77 62 51 43
22 Double
L/240 3454 1024 432 221 128 81 54 38 28 21 16
øWn 1753 823 473 306 214 157 121 96 77 64 54
Triple
L/240 2707 802 338 173 100 63 42 30 22 16 13
øWn 1935 860 484 310 215 158 121 96 77 64 54
Single
L/240 1573 466 197 101 58 37 25 17 13 9 7
øWn 1844 858 491 316 221 163 125 99 80 66 56
20 Double
L/240 4283 1269 535 274 159 100 67 47 34 26 20
øWn 2231 1055 607 393 275 203 156 123 100 83 69
Triple
L/240 3357 995 420 215 124 78 52 37 27 20 16
øWn 2367 1052 592 379 263 193 148 117 95 78 66
Single
L/240 1901 563 238 122 70 44 30 21 15 11 9
øWn 2226 1039 595 384 268 197 151 120 97 80 68
19 Double
L/240 5014 1486 627 321 186 117 78 55 40 30 23
øWn 2685 1275 736 477 333 246 189 149 121 100 84
Triple
L/240 3930 1164 491 252 146 92 61 43 31 24 18
øWn 2718 1208 680 435 302 222 170 134 109 90 76
Single
L/240 2229 660 279 143 83 52 35 24 18 13 10
øWn 2574 1204 691 446 311 229 176 139 113 93 79
18 Double
L/240 5724 1696 716 366 212 134 89 63 46 34 27
øWn 3100 1477 854 554 387 286 219 174 141 117 98
Triple
L/240 4487 1329 561 287 166 105 70 49 36 27 21
Note:
1.Table does not account for web crippling. Required bearing should be determined based on specific span
conditions.

NOTICE: Design defects that could cause injury or death may result from relying on the information in this document without independent
verification by a qualified professional. The information in this document is provided “AS IS”. Nucor Corporation and its affiliates expressly
disclaim: (i) any and all representations, warranties and conditions and (ii) all liability arising out of or related to this document and the information
in it.

1.5B/1.5BI GR80 LRFD | SEPTEMBER 2020 WWW.VULCRAFT.COM