Cianet.

OLT CLI User Manual

EPON OLT CLI User Manual

Cianet Industria e Comercio SA.

www.cianet.com.br
Cianet. OLT CLI User Manual

Contents
1 OVERVIEW ................................................................................................................................. 8

1.1 INTRODUCTION ..........................................................................................................................................................8

1.2 COMMAND EXPLANATIONS IN EACH SECTION ..........................................................................................................8
1.3 COMMAND PRESENTATION IN EXAMPLES ................................................................................................................8
1.4 COMMAND SYNTAX ...................................................................................................................................................9
1.5 EDITING FUNCTIONS, KEYSTROKES, AND ABBREVIATIONS .......................................................................................9

2 COFIGURATION PREPARATION ................................................................................................ 10

2.1 CONSOLE PORT CONNECTION ................................................................................................................................ 10

2.2 NETWORK CONNECTION......................................................................................................................................... 10

3 CLI COMMAND MODE .............................................................................................................. 11

3.1 USER LOGIN EPON CLI SYSTEM ........................................................................................................................... 11

3.2 CLI COMMAND HELP.............................................................................................................................................. 11
3.3 CONFIGURE TERMINAL ........................................................................................................................................... 13

4 SYSTEM MANAGEMENT ........................................................................................................... 13

4.1 CHANGE SYSTEM USER AND PASSWORD ................................................................................................................ 13

4.2 CONFIGURE SYSTEM HOSTNAME............................................................................................................................. 14
4.3 SYSTEM CONFIGURATION FILE ............................................................................................................................... 14
Backup OLT Configuration File ....................................................................................................... 14
Restore OLT configuration from PC ................................................................................................ 15
Backup ONU Configuration File ...................................................................................................... 15
Restore ONU Configuration File from PC ........................................................................................ 16
Backup OLT/ONU Configuration File automatically ....................................................................... 16
4.4 CONFIGURATION MANAGEMENT ........................................................................................................................... 17
Factory Default Configuration ........................................................................................................ 17
Save Configuration ......................................................................................................................... 17
Show current running- configuration ............................................................................................. 17
Show current startup-configuration ............................................................................................... 18
Reboot System ................................................................................................................................ 18
4.5 SYTEM UPDATE FIRMWARE ..................................................................................................................................... 18
system update OLt ‘s firmware .................................................................................................... 18
upgrade all onu(s) by CTCS ............................................................................................................. 19
4.6 LOG MANAGEMENT................................................................................................................................................ 19
Backup Log ..................................................................................................................................... 19
Flush log ......................................................................................................................................... 20
4.7 SNMP MANAGEMENT........................................................................................................................................... 20
SNMP Read Community ................................................................................................................. 20
SNMP Write Community ................................................................................................................ 20
Trap IP Configuration ..................................................................................................................... 21
Cianet. OLT CLI User Manual
4.8 NETWORK ADDRESS MANAGEMENT ..................................................................................................................... 21
Network Parameter Configuration ................................................................................................. 21
Management VLAN Configuration .............................................................................................. 22
Configure system mtu .................................................................................................................... 22
4.9 CONFIGURATION...................................................................................................................................................... 22
Configure system time automatically by NTP ................................................................................ 22
Configure system time manually .................................................................................................... 23
4.10 SHOW SYSTEM CONFIGURATION ............................................................................................................................. 23
Show system infor .......................................................................................................................... 23
Show system ipconfig ..................................................................................................................... 24
Show system log ............................................................................................................................. 24
Show system memory..................................................................................................................... 25
Show system mgmt-vlan ................................................................................................................ 25
Show system snmp ......................................................................................................................... 26
4.11 CONFIGURE SYSTEM ONU TEMPLATE.................................................................................................................... 26
Enable/Disable system ONU template CATV port .......................................................................... 26
Enable/Disable system ONU template fec function ....................................................................... 26
Enable/Disable system ONU template igmp fast-leave function ................................................... 27
configure system ONU template igmp mode ................................................................................. 27
Enable/Disable system ONU template VOIP port ........................................................................... 28
4.12 CONFIGURE USER ONU TEMPLATE ........................................................................................................................ 28
Enter user ONU template config mode .......................................................................................... 28
configure user ONU template capacity .......................................................................................... 28
Enable/Disable user ONU template user port ................................................................................ 29
configure user ONU template egress-policing ................................................................................ 29
configure user ONU template ingress-policing ............................................................................... 30
Enable/Disable user ONU template auto negotiation function ...................................................... 30
Enable/Disable user ONU template auto flow control function ..................................................... 30
Enable/Disable user ONU template auto loop-detec function ....................................................... 31
configure user ONU template mac aging-time .............................................................................. 31
configure user ONU template statistics function ........................................................................... 31

5 SWITCH CONTROL CARD CONFIGURATION .............................................................................. 32

5.1 STORM CONTROL .................................................................................................................................................... 32

Enable/Disable Storm Control and Configure the Storm Control Parameter ................................. 32
5.2 PORT MANEGEMNET ............................................................................................................................................... 32
enter switch port config mode ....................................................................................................... 32
Port parameters ............................................................................................................................. 33
Configurate the pvid of port ........................................................................................................... 34
Configurate auto-nego of port ....................................................................................................... 35
Configurate the speed of port ........................................................................................................ 35
Add vlan list of port ........................................................................................................................ 35
Delete the vlan list of port .............................................................................................................. 36
Show swport current configuration information ............................................................................ 36
Configuration ingress-port rate ...................................................................................................... 36
Cianet. OLT CLI User Manual
Configuration egress-port rate ....................................................................................................... 37
5.3 CONFIGURE SWITCH MODE..................................................................................................................................... 37
Show vlan state .............................................................................................................................. 37
Configure vlan enable/disable ........................................................................................................ 37
5.4 MAC ADDRESS MANAGEMENT .............................................................................................................................. 38
Configure mac-address aging timeout ........................................................................................... 38
Show mac-address aging................................................................................................................ 38
5.5 VLAN CONFIGURATION MANAGEMENT.................................................................................................................. 38
Creat vlan ....................................................................................................................................... 38
Add vlan port member ................................................................................................................... 39
Delete vlan port member ............................................................................................................... 39
Delete vlan...................................................................................................................................... 39
Show vlan configuration of vlan ..................................................................................................... 40
5.6 RSTP CONFIGURATION MANAGEMENT ................................................................................................................... 40
Enable/disable RSTP configuration ................................................................................................ 40
Configure Rstp bridge maxage aging time ..................................................................................... 41
Configure Rstp bridge delay time ................................................................................................... 41
Configure Rstp bridge prioprity ...................................................................................................... 42
Configure max counts of Rstp packet per second........................................................................... 42
Configure Rstp port piority ............................................................................................................. 42
Configure Rstp port path-cost ........................................................................................................ 43
Configure Rstp edge-port ............................................................................................................... 43
Configure Rstp p2p port ................................................................................................................. 44
Configure Rstp protocol version check ........................................................................................... 44
Show Rstp information ................................................................................................................... 45
5.7 TRUNK CONFIGURATION MANAGEMNET................................................................................................................ 45
Enter trunk config mode ................................................................................................................. 45
Add port of trunk member.............................................................................................................. 46
Delete port of trunk member.......................................................................................................... 46
Delete trunklist configuraion .......................................................................................................... 46
Show trunk information ................................................................................................................. 47
5.8 RMON NETWORK MONITORING AND CONFIGURATION ......................................................................................... 47
rmon history configration ............................................................................................................... 48
rmon event configuration ............................................................................................................... 49
rmon alarm configuration .............................................................................................................. 50
Show rmon statistics information .................................................................................................. 51
Show rmon history information...................................................................................................... 51
show rmon event information ..................................................................................................... 52
Show rmon eventlog information ................................................................................................... 52
Show rmon alarm information ....................................................................................................... 53
5.9 MIRROR PORT CONFIGURATION MANAGEMENT.................................................................................................... 53
Enable/disable mirror fuction ......................................................................................................... 53
Configure mirror source_port ......................................................................................................... 54
Configure mirror dest_port ............................................................................................................ 55

Show mirror information ................................................................................................................ 55

Cianet. OLT CLI User Manual
5.10 IGMP-SNOOPING MONITORING AND CONFIGURATION.......................................................................................... 55
Enable/disable igmp snooping function ......................................................................................... 55
Enable/disable igmp snooping fast-leave function ........................................................................ 56
Enable/disable igmp snooping drop-unknown function................................................................. 56
Configure igmp snooping host-aging-time ..................................................................................... 56
Enable/disable igmp snooping querier function ............................................................................. 56
Configure igmp snooping querier query interval ............................................................................ 57
Configure igmp snooping querier max-response-time ................................................................... 57
Configure igmp snooping querier source_ip ................................................................................... 57
Configure igmp snooping querier router-aging-time ..................................................................... 57
add/delet igmp-snooping static port.............................................................................................. 57
5.11 CLEAR ALL LEARNED MAC ADDRESS......................................................................................................................... 58

6 OLT MANAGEMENT.................................................................................................................. 58

6.1 OLT BASIC CONFIGURE MANAGEMENT .................................................................................................................. 58

Enter OLT Management ................................................................................................................. 58
Enable/disable OLT port ................................................................................................................. 59
Long light checking Function .......................................................................................................... 59
Configure p2p Function .................................................................................................................. 60
Configure out-tpid Function ........................................................................................................... 60
6.2 OLT ACL CONFIGURE ............................................................................................................................................ 60
Delete One ACL ............................................................................................................................... 60
Delete Current OLT All ACL ............................................................................................................. 61
Add OLT ACL ................................................................................................................................... 61
6.3 OLT MAC MANAGEMENT..................................................................................................................................... 62
Configure OLT MACAge Time ......................................................................................................... 62
Flush current olt’s mac table list..................................................................................................... 63
Enable OLT MAC Learening function .............................................................................................. 63
Disable OLT MAC Learning Function .............................................................................................. 63
Enable MAC Move .......................................................................................................................... 63
Disable MAC Move ......................................................................................................................... 63
6.4 OLT AUTH ............................................................................................................................................................... 64
Disable OLT Auth ............................................................................................................................ 64
Add/Delete/Show Whitelist ............................................................................................................ 64
Add/Delete/Show Blacklist ............................................................................................................. 65
OLT hybrid Auth Mode Configure ................................................................................................... 66
OLT LOID Auth Mode Configure ..................................................................................................... 67
OLT MAC Auth Mode Configure ..................................................................................................... 68
6.5 CONFIGURE PACKET_FILTER OF OLT PON PORT .................................................................................................. 68
Packet_filter of OLT PON port about DHCP function ...................................................................... 68
EOC MME packet-filter function ..................................................................................................... 68
Netbios packet-filter function ......................................................................................................... 68
8306_rtk_loopback packet-filter function ...................................................................................... 69
6.6 CONFIGURE TRAP ALARM AND MESSAGE ALARM FUNCTION OF ONU ..................................................... 69

Configure message alarm about ONU off the electricity............................................................. 69

Cianet. OLT CLI User Manual
Configure trap alarm about ONU off the electricity ....................................................................... 70
6.7 CONFIGURE QINQ FUNCTION................................................................................................................................. 70
Add QinQ configuration.................................................................................................................. 70
Delete QinQ configuration.............................................................................................................. 70
6.8 CONFIGURE OFFLINE ONU ........................................................................................................... 71
Add offline ONU and bind the template with ONU ........................................................................ 71
delete offline ONU .......................................................................................................................... 71
6.9 SHOW OLT CONFIGURATION INFORMATION .......................................................................................................... 72
Show olt attribute information ....................................................................................................... 72
Show olt optical information .......................................................................................................... 72
Show olt online-onu information .................................................................................................... 73
Show olt acl information ................................................................................................................ 73
Show olt auth mode information ................................................................................................... 73
Show olt port staus information ..................................................................................................... 74
Show olt alarm information ........................................................................................................... 74
Show olt learning-mac information................................................................................................ 75
Show olt p2p information ............................................................................................................... 75
Show olt packet-filter information ................................................................................................. 75
Show olt tpid out-tpid ..................................................................................................................... 76

7 ONU MANAGEMENT ................................................................................................................ 76

7.1 SHOW ONU BASIC INFORMATION ........................................................................................................................ 76

Show Online ONU ........................................................................................................................... 76
Show ONU Version ......................................................................................................................... 77
Show ONU Capabilities ................................................................................................................... 77
Show ONU Optical .......................................................................................................................... 77
7.2 ONU MANAGEMENT MODE ................................................................................................................................. 77
7.3 ONU BASIC OPERATION AND MANAGEMENT ...................................................................................................... 78
Reboot ONU.................................................................................................................................... 78
Deregister ONU .............................................................................................................................. 79
Configure ONU FEC ......................................................................................................................... 79
Restore ONU to Default Settings .................................................................................................... 79
Configure ONU Sys Management IP ............................................................................................... 79
Save Current ONU Configuration.................................................................................................... 80
upgrade ONU software .................................................................................................................. 80
7.4 CONFIGURE ONU IGMP ............................................................................................................. 80
ONU IGMP Global Configuration .................................................................................................... 80
Configure ONU UNI Port IGMP ....................................................................................................... 81
7.5 ENTER ONU LINK MODE ....................................................................................................................................... 82
Configure ONU Link Upstream SLA ................................................................................................ 82
Configure ONU Link Downstream SLA ............................................................................................ 82
Configure ONU Link Acl .................................................................................................................. 83
7.6 ENABLE/DISABLE ONU PORT ISOLATE FUNCTION.................................................................................................. 84
7.7 CONFIGURE ONU PON STATISTICS......................................................................................................................... 84

7.8 ENABLE/DISABLE ONU CATV PORT...................................................................................................................... 84

Cianet. OLT CLI User Manual
7.9 ENTER ONU UNI PORT MANAGEMENT MODE .................................................................................................... 84
Configure ONU Uni Port Parameters .............................................................................................. 85
Configure ONU Uni Port Vlan Mode ............................................................................................... 87
7.10 ENTER ONU VOIP PORT MANAGEMENT MODE................................................................................................. 91
Configure ONU VOIP Port Parameters ........................................................................................... 92

8 EQUIPMENT DIAGNOSIS INFORMATION .................................................................................. 94

8.1 PING COMMAND TEST............................................................................................................................................. 94

8.2 TRACERT CHECKING THE DEVICE THE PATH OF THE HOST....................................................................................... 94

INCLUDING REMARKS ...................................................................................................................... 95

Cianet. OLT CLI User Manual

1 Overview

1.1 Introduction

This manual is applicable to C-Data FD1104B, FD1104S, FD1108S EPON OLT products , This
document is for those who perform all tasks for the EPON OLT once it has been successfully
installed. Users of this Guide should understand EPON technology and have experience
configuring EPON devices.

C-Data OLT system could support inband and outband network management mode and EMS
network management based on SNMP.

The user can use several different network interfaces to do network management, such as those
listed below:
• SNMP Management
• CLI Management

This manual introduce CLI configuration function of EPON OLT.

In the initial setup step of OLT, there are two ways based on CLI management to login system:
• Terminal Emulation of CONSOLE port (RJ-45)
• Telnet of management port (RJ-45)

1.2 Command Explanations in each Section

Commands are usually presented in the following ways:

• Tables for specific functions or features that include important parameters

• Specific commands that are part of examples

• A table at the end of each Section that includes all commands and descriptions of all
parameters.

1.3 Command Presentation in Examples

When a command is presented in an example, it follows the exact syntax and parameter values
that match the

example configuration. If a command is very long, a (->) is used to note the command continues
on the next line.
Cianet. OLT CLI User Manual

1.4 Command Syntax

The syntax rules for a Command and its parameters use the following conventions throughout
this document:

• Blackface letter indicates command itself or command keyword

• “< >” The text inside it is the required parameters

• [] = Optional The text inside it is the optional parameters

• | = Option (OR) The multiple items which are divided are multi-select required
parameters, indicating that must select one of them.

• “<x-y>” Valus rang from x to y. One is selected.

1.5 Editing Functions, Keystrokes, and Abbreviations

The product supports line editing, line recall, and abbreviations, so that command line input and
editing can be done very quickly once command syntax and the line editing commands are
learned.

Action Key Sequence

Move cursor within command line left and right arrow

Delete character to left of cursor [Delete] or [Backspace]

Clear command line [Ctrl/U]

Recall previous command in command history CTRL/P or up arrow

Recall next command in command history CTRL/N or down arrow

Automatically complete a partially entered [Tab] or [Ctrl/I]

command keyword
Cianet. OLT CLI User Manual

2 Cofiguration Preparation

2.1 Console Port Connection

There is a Console port in the front panel of Switch Control Card .The command line
configuration interface is enabled via console port connecting to the NMS’s superior terminal.
Super terminal’s basic configuration is as follows:

2.2 Network Connection

EPON OLT support inband management (CAT5 connect to ge1-ge8 port) and outband
management
(CAT4 cable to management port).After Telnet to CLI interface ,we can manage the GEPON
products.

Defualt outband(inband) network management IP:192.168.1.100

Cianet. OLT CLI User Manual

3 CLI Command Mode

OLT CLI use the layered command structure（Command mode）. Every command mode provides
subset of CLI command. The available CLI command depends on those command modes which
have been activated currently.

3.1 User Login EPON CLI System

System provide two login accounts default as follows:

Username Password
admin admin
guest Null

After you log in successfully, the following interface pops up :

admin login

Username:admin
Password:*****

Entry level 2(manager) successfully!

epon#

guest login

Username:guest

Entry level 1(visitor)

epon>

3.2 CLI Command Help

When the command lines shows : epon> or epon#, user can input the configuration command to
mange or inquire the configuration information .
OLT CLI command provides various help and shortcut keys. Next table lists main shortcut keys of
obtaining help and methods in CLI command.
CLI command Help
Cianet. OLT CLI User Manual

Method Function
Type “?” in any CLI command level Show all available commands
Partial command+“？” Show the initial command list of the specific
character string(There is no space between the
command and the question mark）
Command+Space +“？” Show the completer syntax and the brief instruction
of command
Partial command +<tab> System will automatically complete the command or
keyword
Ctrl-P” or the up arrow key ↑ Invoke the executed command previously.

For example 1:
epon#?
auth - configure authentication mode for Olt
igmp-snooping - configure IGMP Snooping
logout - exit the CLI system
mac-address - ctrl-card dynamic mac address table management
mirror - configure switch mirror
olt - configure OLT
ping - test that a remote host is reachable
reset - reset the values
rmon - configure RMON
rstp - rapid spanning tree protocol configuration
show - show system configuration
swmode - set basic switch mode
swport - enter switch port config mode
system - configure systerm
tracert - trace the route to host
trunk - enter trunk config mode
vlan - enter vlan config mode

For example 2:
epon# s?
swmode swport system show
epon# s

For example 3:
epon#show + [ ? ]
auth - show olt auth mode
igmp-snooping - show igmp snooping configurations
mac-address - mac-address
mirror - show switch mirror configurations
olt - show olt's configuration
qinq - show QinQ configuration
Cianet. OLT CLI User Manual

rmon - show RMON

rstp - Display RSTP information
running-config - show current running-configuration
startup-config - show current startup-configuration
swmode - show swmode
swport - display port attribute information
system - show system configuration
trunk - show trunk configuration
vlan - show vlan configuration

3.3 Configure Terminal

The command mode allows the user to change equipment configuration. The changed
configuration can be saved into OLT flash memory and used when system is started next time.

Configuration mode allows distributing and modifying each port separately for the specific
parameters (Optical Line Terminal).

For example1: epon# swport ge1

System prompt is epon(GE-1)#

For example2: epon# olt 1

System prompt is epon(olt-1)#

ONU configuration mode is the sub-mode of configuration command mode of olt, and is used to
configure the logical port parameters of ONU
For example: epon(olt-1)# onu 60
System prompt is epon(olt-1/onu-60)#

4 System Management

4.1 Change system user and password

Command epon#system user <old-password> <new-user>

Grammar <new-password> <comfirm-password>

Function Change system user and password

<old-password> Old password

<new-user> New username

Cianet. OLT CLI User Manual

<new-password> New password

<comfirm-password> Comfirm password

4.2 configure system hostname

Command
epon# system hostname <hostname>
Grammar

Function configure system hostname

<hostname> System hostname

【Example】

Example 1：setting OLT hostname is C-DATA

epon# system hostname C-DATA

C-DATA#

4.3 System Configuration File

Backup OLT Configuration File

Command
epon# system configurations backup olt <tftp-server>
Grammar

Backup OLT configuration File to PC, firstly, the tftp server should be
Function
ready.

<tftp-server> Tftp server ip address, eg: 192.168.1.130

【Example】

Example 1：Backup OLT configuration file to PC：

epon# system configurations backup olt 192.168.2.133

Backup olt configurations file to host 192.168.2.133.
Remote filename: olt_cfg_backup_20000101055726.tar.gz.

epon#
Cianet. OLT CLI User Manual

Restore OLT configuration from PC

Command
epon# system configurations download olt <tftp-server> <filename>
Grammar

Restore OLT configuration from PC, firstly, the tftp server and
Function
configurefile should be ready.

<tftp-server> Tftp server ip address, eg: 192.168.1.130

The Configuration File.

<filename>
eg: olt_cfg_backup_20000101055726.tar.gz

【Example】

Example 1：Restore OLT configuration from PC：

epon# system configurations download olt 192.168.2.130

olt_cfg_backup_20000101063321.tar.gz
Download olt configurations file from host 192.168.2.130.

epon#

Backup ONU Configuration File

Command
epon#system configurations backup onu <tftp-server>
Grammar

Backup ONU configuration File to PC, firstly, the tftp server should
Function
be ready.

<tftp-server> Tftp server ip address, eg: 192.168.1.130

【Example】

Example 1：Backup ONU Configuratin to PC：

epon# system configurations backup onu 192.168.2.130

Backup onu configurations file to host 192.168.2.130.
Remote filename: onu_cfg_backup_20000101060207.tar.gz.

epon#
Cianet. OLT CLI User Manual

Restore ONU Configuration File from PC

Command epon#system configurations download onu <tftp-server>

Grammar <filename>

Restore ONU configuration from PC, firstly, the tftp server and
Function
configurefile should be ready.

<tftp-server> Tftp server ip address, eg: 192.168.1.130

The Configuration File.

<filename>
eg: olt_cfg_backup_20000101055726.tar.gz

【Example】

Example 1：Restore ONU configuration from PC：

epon# system configurations download onu 192.168.2.130

onu_cfg_backup_20000101060207.tar.gz
Download onu configurations file from host 192.168.2.130.

epon#

Backup OLT/ONU Configuration File automatically

Command epon# system configurations auto-backup <admin>,<backup-type>,

Grammar <interval>,<server>

Backup OLT/ONU configuration File to PC automatically, firstly, the

Function
tftp server should be ready.

Disable: close auto-backup function

<admin>
Enable:open auto-backup function

<backup-type> <olt | onu | all >

<interval> Auto-backup interval,<1-365> day

<server> Tftp server ip address, eg: 192.168.1.130

Cianet. OLT CLI User Manual

4.4 Configuration Management

Factory Default Configuration

Command
epon# system default
Grammar

Set the device back to factory default congfiguration。

Function
Remark：the device would reboot。

Save Configuration

Command
epon# system save <all> or <olt>
Grammar

Function Save device configuration。

<all> Take this parameter will save all device，include all olt and all onu.

<olt> Take this parameter only save olt configuration.

Show current running- configuration

Command
epon#show running-config <all> ,<auth>, <olt>,<onu> or <swith>
Grammar

Function show current running-configuration

show current all running-configuration

all
Include OLT and ONU

auth show current auth running-configuration

olt show OLT running-configuration

onu show ONU running-configuration

swith show current swith running-configuration

Cianet. OLT CLI User Manual

Show current startup-configuration

Command
epon#show startup-config <all> ,<auth>, <olt>,<onu> or <swith>
Grammar

Fuction show current startup-configuration

all show current all startup-configuration

auth show current auth startup-configuration

olt show olt startup-configuration

onu show onu startup-configuration

swith show current switch startup-configuration

Reboot System

Command
epon# system reboot
Grammar

Function Reboot OLT.

4.5 Sytem update firmware

system update OLt ‘s firmware

Command
epon#system update firmware <firmware> tftp-server <ip>
Grammar

Sytem update olt’s firmware

Fuction
Tftp server and firmware file should be ready

<firmware> update system firmware

<ip> tftp server IP address

Cianet. OLT CLI User Manual

upgrade all onu(s) by CTCS

Command
epon#system update onu <tftp-server> <file> <type>
Grammar

upgrade all onu(s) by CTC

Fuction
Tftp server and firmware file should be ready

<tftp-server> tftp server IP address

<file> image name

<type> device type

4.6 Log Management

Backup Log

Command
epon#system log backup <server-ip>
Grammar

Function Backup system log to PC, firstly, tftp server should be ready.

<server-ip> Tftp server ip address, eg: 192.168.1.130

【Example】

Example 1：Backup system log to PC：

epon# system log backup 192.168.2.130

Backup local log file to host 192.168.2.130 successfully, remote filename:
log_backup_20000101002224.txt!

【Example】

Example 2：Show system all log：

epon# show system log all

Cianet. OLT CLI User Manual

Flush log

Command
epon#system log flush
Grammar

Function Flush all system log.

【Example】

Example 1：Flush system all log：

epon# system log flush

Flush log file successfully!

epon#

4.7 SNMP Management

SNMP Read Community

Command
epon# system snmp community read-only <community>
Grammar

Function Set SNMP Read Community.

Read Community，the string’s length should not lenger than 16 chars.

< community >
eg：public。

SNMP Write Community

Command
epon# system snmp community read-write <community>
Grammar

Function Set SNMP Write Community .

Write Community，the string’s length should not lenger than 16 chars.

< community >
eg：private。
Cianet. OLT CLI User Manual

Trap IP Configuration

Command
epon#system snmp trap-ip <index> <ip-addr>
Grammar

Function Set the SNMP Trap IP Address, could set up to 4 trap ip

<index> index : 1-4。

<ip-addr> IP Address. Eg: 192.168.1.130

4.8 Network Address Management

Command
epon#system ipconfig
Grammar

Function Configure the Network Address of inband and outband manage IP.

【Example】

Example 1：Show command parameter

epon#system ipconfig // enter“？”

<ip> - ip address, example: 192.168.0.233
<netmask> - netmask address, for example: 255.255.255.0
<gateway> - gateway

Network Parameter Configuration

Command
epon#system ipconfig <ip> <netmask> <gateway>
Grammar

Configure inband and outband management IP address netmask

Function
gateway。

< ip> IP address. eg: 192.168.1.100

<netmask> Netmask. eg: 255.255.255.0

< gateway > Gateway. eg: 192.168.1.254

【Example】
Cianet. OLT CLI User Manual

Example 1：Confgiure the manage ip to 192.168.1.100，netmask to: 255.255.255.0，gateway

to 192.168.1.254：

epon# system ipconfig 192.168.1.100 255.255.255.0 192.168.1.254

Example 2：Show the Network IP address Parameter

epon# show system ipconfig
Out band fast-ethernet ip address: 192.168.1.100 , netmask is: 255.255.255.0.
Gateway address is: 192.168.1.1
epon#

Management VLAN Configuration

Command
epon# system mgmt-vlan < vid>
Grammar

Function Configure the management vlan id.

< vid> VLAN ID: 1～4094

Configure system mtu

Command
epon# system mtu <mtu>
Grammar

Function Configure system maximum transmission unit.

<mtu> Scope:<1518-2047>, unit: byte

4.9 configuration

Configure system time automatically by NTP

Command
epon# sys date ntp <admin> <interval><server>or<timezone>
Grammar

Function Configure system time automatically by NTP

Cianet. OLT CLI User Manual

Configure system time manually

Command
epon# system date manual <time>
Grammar

Function Configure system time manually

<time> Time format: YYYY.MM.DD-hh:mm:ss

【Example】
Example1：manually systime is 2015.12.12 10h:10m:10s
epon# system date manual 2015.12.12-10:10:10

4.10 show system configuration

Show system infor

Command
epon# show system infor
Grammar

Function show system infor

【Example】
Example1：show device system infor
epon# show system infor
Software Version : 2.2.01s(Jan 9 2015)
Hardware Version : Unknown
MAC : e0-67-b3-00-00-00
Serial Number : Unknown
System Time :
System Temperature :
FAN[1] : Normal
FAN[2] : Normal
FAN[3] : Normal
Cianet. OLT CLI User Manual

Show system ipconfig

Command
epon# show system ipconfig
Grammar

Function show ipconfig

【Example】
Example 1：show system ipconfig
epon# show system ipconfig
Out band fast-ethernet ip address: 192.168.1.100 , netmask is: 255.255.255.0.
Gateway address is: 192.168.1.1
MNGMT-VID : 1

Show system log

Command
epon# show system log <all> or <tail>
Grammar

Function show device system log

tail show the tail of the log file

all Show the all logs

【Example】
Example 1： show the tail of the log file
epon# show system log tail
01/01/00 00:44:42 Bridge Max Age : 30
01/01/00 00:44:49 Bridge Max Age must be less than or equal to twice the the Bridge
Forwarding Delay minus 1.1
01/01/00 00:44:49 Bridge Forwarding Delay : 20
01/01/00 00:44:54 Bridge Max Age must be less than or equal to twice the the Bridge
Forwarding Delay minus 1.
01/01/00 00:44:54 Bridge Forwarding Delay : 20
01/01/00 00:00:22 Receive from rstp bpdu handle message queue failed!
01/01/00 00:00:25 (cdtDeviceStateSet) Slot 1 olt 1~4 deregistered.
01/01/00 00:00:25 (cdtDeviceStateSet) Slot 1 olt 5~8 deregistered.
01/01/00 00:01:15 (cdtDeviceStateSet) Slot 1 olt 5~8 registered.
01/01/00 00:01:29 (cdtDeviceStateSet) Slot 1 olt 1~4 registered.
01/01/00 00:01:40 onu-1-1-25 (llid-0,mac-e0-67-b3-07-24-0c,ctc-30)online...

1
Cianet. OLT CLI User Manual

01/01/00 00:00:22 Receive from rstp bpdu handle message queue failed!
01/01/00 00:00:25 (cdtDeviceStateSet) Slot 1 olt 1~4 deregistered.
01/01/00 00:00:25 (cdtDeviceStateSet) Slot 1 olt 5~8 deregistered.
01/01/00 00:01:15 (cdtDeviceStateSet) Slot 1 olt 1~4 registered.
01/01/00 00:01:29 (cdtDeviceStateSet) Slot 1 olt 5~8 registered.
01/01/00 00:01:37 onu-1-1-25 (llid-0,mac-e0-67-b3-07-24-0c,ctc-30)online...
01/01/00 00:00:22 Receive from rstp bpdu handle message queue failed!
01/01/00 00:00:23 Receive from rstp bpdu handle message queue failed!
01/01/00 00:00:26 (cdtDeviceStateSet) Slot 1 olt 1~4 deregistered.
01/01/00 00:00:26 (cdtDeviceStateSet) Slot 1 olt 5~8 deregistered.
01/01/00 00:01:16 (cdtDeviceStateSet) Slot 1 olt 1~4 registered.
01/01/00 00:01:30 (cdtDeviceStateSet) Slot 1 olt 5~8 registered.
01/01/00 00:32:14 onu-1-1-25 (llid-0,mac-e0-67-b3-07-24-0c,ctc-30)online...
epon#

Show system memory

Gommand
epon# show system memory
Grammar

Function show system memory

【Example】
Example1：show system memory
epon# show system memory
total used free shared buffers
Mem: 61428 25712 35716 0 0
-/+ buffers: 25712 35716
Swap: 0 0 0

Show system mgmt-vlan

Command
epon# show system mgmt-vlan
Grammar

Function show system mgmt-vlan

【Example】
Example 1: show system mgmt-vlan
Cianet. OLT CLI User Manual

epon# show system mgmt-vlan

system mgmt-vlan : 1

Show system snmp

Command
epon# show system snmp
Grammar

Function Show system snmp

【Example 】
Example 1：show system snmp
epon# show system snmp
Read-only community : public
Read-write community : private

4.11 Configure system ONU template

Enable/Disable system ONU template CATV port

Gommand
epon# system onu-template-config-system catv <admin>
Grammar

Function enable/disable system ONU template CATV port

Enable: Open the system ONU template CATV port

<admin>
Disable: Close the system ONU template CATV port

【Example】
Example1： enable system ONU template CATV port
epon# system onu-template-config-system catv enable

Enable/Disable system ONU template fec function

Gommand
epon# system onu-template-config-system ctc fec <admin>
Grammar
Cianet. OLT CLI User Manual

Function enable/disable system ONU template fec function

Enable: Open the system ONU template fec function

<admin>
Disable: Close the system ONU template fec function

【Example】
Example1： enable system ONU template fec function
epon# system onu-template-config-system ctc fec enable

Enable/Disable system ONU template igmp fast-leave function

Gommand epon# system onu-template-config-system ctc igmp fast-leave

Grammar <state>

Function enable/disable system ONU template igmp fast-leave function

Enable: Open the system ONU template igmp fast-leave function

<admin>
Disable: Close the system ONU template igmp fast-leave function

【Example】
Example1： enable system ONU template igmp fast-leave function
epon# system onu-template-config-system ctc igmp fast-leave enable

configure system ONU template igmp mode

Gommand
epon# system onu-template-config-system ctc igmp mode <mode>
Grammar

Function configure system ONU template igmp mode

<mode> mode,{igmp-mld-snooping|controllable-igmp-mld|pass-through}

【Example】
Example1：setting system ONU template igmp mode is igmp-mld-snooping
epon# system onu-template-config-system ctc igmp mode igmp-mld-snooping
Cianet. OLT CLI User Manual

Enable/Disable system ONU template VOIP port

Gommand
epon# system onu-template-config-system pots ctc admin <admin>
Grammar

Function enable/disable system ONU template voip port

Enable: Open the system ONU template VOIP port

<admin>
Disable: Close the system ONU template VOIP port

【Example】
Example1：enable the system ONU template voip port
epon# system onu-template-config-system pots ctc admin enable

4.12 Configure user ONU template

Enter user ONU template config mode

Gommand
epon# system onu-template-config-user <templateID>
Grammar

Function Enter user onu template config mode

<templateID> user onu template id :1-255

【Example】
Example1：enter user onu template config mode
epon# system onu-template-config-user 1
epon(onu_template-1)#

configure user ONU template capacity

Gommand epon(onu_template-1)# config capacity <catvNum> <portNum>

Grammar <potsNum> <templateName>

Function configure user ONU template capacity

<catvNum> The number of catv port

Cianet. OLT CLI User Manual

<portNum> The number of ethernet port

<potsNum> The number of voip port

<templateName> The name of template

【Example】
Example1：setting user ONU template capacity is 1 CATV port、4 ethernet port and 1 VOIP port
and the name is template1
epon(onu_template-1)# config capacity 1 4 1 template1

Enable/Disable user ONU template user port

Gommand
epon(onu_template-1)# config uni <uniId> ctc admin <admin>
Grammar

Function enable/disable user ONU template user port

<uniId> User port ID :<1-24>

Enable: Open the user ONU template user port

<admin>
Disable: Close the user ONU template user port

【Example】
Example1：enable the user ONU template user port
epon(onu_template-1)# config uni 1 ctc admin enable

configure user ONU template egress-policing

Gommand epon(onu_template-1)#config uni <uniId> ctc engress-policing

Grammar <max-rate>

Function configure system ONU template egress port rate

<uniId> User port ID :<1-24>

<max-rate> 0-1000000(kbps)
Cianet. OLT CLI User Manual

configure user ONU template ingress-policing

Gommand epon(onu_template-1)#config uni <uniId> ctc ingress-policing

Grammar <max-rate>

Function configure system ONU template ingress port rate

<uniId> User port ID :<1-24>

<max-rate> 0-1000000(kbps)

Enable/Disable user ONU template auto negotiation function

Gommand
epon(onu_template-1)#config uni <uniId> ctc auto-nego <admin>
Grammar

Function enable/disable user ONU template auto negotiate function

<uniId> User port ID :<1-24>

Enable: Open the user ONU template auto negotiate function

<admin>
Disable: Close the user ONU template auto negotiate function

Enable/Disable user ONU template auto flow control function

Gommand
epon(onu_template-1)#config uni <uniId> ctc flow-ctrl <admin>
Grammar

Function enable/disable user ONU template flow control function

<uniId> User port ID :<1-24>

Enable: Open the user ONU template flow control function

<admin>
Disable: Close the user ONU template flow control function
Cianet. OLT CLI User Manual

Enable/Disable user ONU template auto loop-detec function

Gommand
epon(onu_template-1)#config uni <uniId> ctc loop-detect <admin>
Grammar

Function enable/disable user ONU template loop detect function

<uniId> User port ID :<1-24>

Enable: Open the user ONU template loop detect function

<admin>
Disable: Close the user ONU template loop detect function

configure user ONU template mac aging-time

Gommand epon(onu_template-1)#config uni <uniId> ctc mac-aging-time

Grammar <timer>

Function configure user ONU template mac aging-time

<uniId> User port ID :<1-24>

<timer> Mac address aging time：0-4294967295 second

configure user ONU template statistics function

Gommand epon(onu_template-1)#config uni <uniId> ctc statistics

Grammar <monitoring-status> <monitoring-period>

Function configure user ONU template mac aging-time

<uniId> User port ID :<1-24>

The status of statistics function

<monitoring-sta
Enable:open the statistics function
tus>
Disable:close the statistics function

<monitoring-pe
The period of statistics:<1-4294967295> second
riod>
Cianet. OLT CLI User Manual

5 Switch control card configuration

5.1 Storm Control

Enable/Disable Storm Control and Configure the Storm Control Parameter

Command
epon# swport <port> storm-ctrl <type> <enable> <rate>
Grammar

Enable or Disable Storm Control function and configure the storm

Function
control parameter

By now, support the follow：

bcast-mcast-dlf,
broadcast
multicast
<type>
dlf
broadcast-multicast
broadcast-dlf
multicast-dlf

Enable: Open the storm control function

<enable>
Disable: Close the storm control funcion

<rate> The control rate : 0-33554431(kbps)

5.2 Port manegemnet

enter switch port config mode

Command
epon#swport <port>
Gtammar

enter switch port config mode. Noting: ge1-ge8 is eth port, ge9-ge16
Function
is PON port

<port> Switch port number ,<ge1-ge16>

【Example】
Cianet. OLT CLI User Manual

Example 1：Enter Sithch port ge1 config mode

epon# swport ge1

epon(GE-1)#
epon(GE-1)# ? Enter“？”show the current directory ：
admin - enable or disable current port
admit-frame - set port access frame type
auto-nego - enable auto-nego
def-pri - set port default priority
exit - exit current mode
flow-ctrl - set port flow control
learning - configure switch port learning
pvid - configure the PVID
rate-ctrl - configure rate-control
speed - configure the SPEED
storm-ctrl - Configurate storm control, support broadcast | mult
icast | unknown unicast
vlan - add or del vlan list
Global command:
logout - exit the CLI system
ping - test that a remote host is reachable
show - show system configuration
tracert - trace the route to host

Port parameters

Enable current port

Command
epon(GE-1)# admin enable
Grammar

Function Configuration current port enable

Disable current port

Command
epon(GE-1)# admin disable
Grammar

Function Disable current port

Cianet. OLT CLI User Manual

Set port access frame type

Command
epon(GE-1)# admit-frame <type>
Grammar

Function set port access frame type

all：all of packet。tagged：
<type> only receive tag packet
untagged:only receive untag packet 。

Set port default priority

Command
epon(GE-1)# def-pri <priority>
Grammar

Configure the switch port default pvid, when switch port receive
Function packet witch no tag, it will give the packet default pvid, that is the
default 802.1p priority.

<priority> Config priority ,valaue: <0-7>

Set port flow-ctrl function

Command
epon(GE-1)# flow-ctrl <admin>
Grammar

Funcion Configurate storm control

disable：disable flow-ctrl function

<admin>
enable: enable flow-ctrl function

Configurate the pvid of port

Command
epon(GE-1)#pvid <pvid>
Grammar

Function Configurate the pvid of port

Cianet. OLT CLI User Manual

<pvid> Optional parameters：0-4094。

Configurate auto-nego of port

Command
epon(GE-1)# auto-nego
Grammar

Function Configurate auto-nego of port

Configurate the speed of port

Command
epon(GE-1)#speed <speed> duplex <duplex>
Grammar

Function Configurate the speed of port

Effective parameter;
<speed>
<10m|100m|1000m>

Optional parameters
<duplex>
<full|half>

Add vlan list of port

Command
epon(GE-1)# vlan add <vidlist> <tag>
Grammar

Function Add vlan list port and set up tag mode

<vidlist> vlan id list,<Combination of 1~4094>

Mark way is optional parameters，

<tag> Given tag parameters is out of the packet with the tag
The tag parameter default is out of the packet without the tag

【Example】
Example 1： create Vlan2-100 with the TAG TAG, create vlan101-200 without the TAG markup
under the exchange ge1 port
epon(GE-1)# vlan add 2-100 tag
epon(GE-1)# vlan add 101-200
Cianet. OLT CLI User Manual

Delete the vlan list of port

Command
epon(GE-1)# vlan delete <vidlist>
Grammar

Function Delete the vlan list of port

<vidlist> vlan id list,<Combination of 1~4094>

【Example】

Example 1：delete vlan 2-200 of ge1 port

epon(GE-1)# vlan del 2-200

Show swport current configuration information

Command
epon# show swport ge1 attribute
Grammar

Function Show swport current configuration information

【Example】

Example 1:show swport current configuration of ge1 port information

epon# show swport ge1 attribute

GE-1 STATE
Link-State : Link-down
Admin-State : Enable
Flow-Control : Disable
Speed-State 1000
Duplex-State : Full
Learning : Disable
Egress-Rate-Limit : Disable
Ingress-Rate-Limit : Disable
Priority 0
PVID 1

Configuration ingress-port rate

Command epon(GE-1)# rate-ctrl ingress <rate>

Cianet. OLT CLI User Manual

Grammar

Function Configuration ingress-port rate

<rate> 0-1000000(kps)

Configuration egress-port rate

Command
epon(GE-1)# rate-ctrl egress <rate>
Grammar

Function Configuration engress-port rate

<rate> 0-1000000(kps)

5.3 Configure switch mode

Show vlan state

Command
epon#show swmode vlan
Grammar

Function Show vlan state

【Example】

Example 1：show swmode vlan ：

epon# show swmode vlan

VLAN STATUS : Disable

Configure vlan enable/disable

Command
epon# swmode vlan <mode>
Grammar

Function Enable/disable the vlan function

Enable :enable vlan

<mode>
Disable :disable vlan
Cianet. OLT CLI User Manual

5.4 MAC address management

Configure mac-address aging timeout

Command
epon# mac-address aging <timeout>
Grammar

Function Configure mac-address management timeout 。

<timeout> MAC aging time :range：0-65535s

Show mac-address aging

Command
epon# show mac-address aging
Grammar

Function show mac-address-aging

5.5 Vlan Configuration management

Creat vlan

Command
epon#vlan <vlanid>
Grammar

Function Creat vlan and enter vlan config mode

< vlanid > 1-4094

【Example】

Example 1：Creat vlan100 and enter vlan100 config mode，

epon#vlan 100
epon(vlan-100))#

epon(vlan-100) # ? enter“？”or “help” showwing the current directory：

delete - delete vlan list
exit - exit current mode
member - add or delete member-port
Cianet. OLT CLI User Manual

lobal command:
logout - exit the CLI system
ping - test that a remote host is reachable
show - show system configuration
tracert - trace the route to host

Add vlan port member

Command
epon(vlan-100) # member add <member> <tag>
Grammar

Function add vlan member and set up tag

<member> ge1-ge16

Mark way is optional parameters，

<tag> Given tag parameters is out of the packet with the tag
The tag parameter default is out of the packet without the tag

【Example】

Example 1：add ge1,ge2 and ge3 as vlan100 member and set up tag，add ge4 and ge5 as
vlan100 member and set up untag：

epon(vlan-100)#member add ge1-ge3 tag

epon(vlan-100)#member add ge4-ge5

Delete vlan port member

Command
epon(vlan-100)# member del <member>
Grammar

Function Delete vlan port member。

<member> ge1-ge16。

Delete vlan

Command
epon(vlan-100)#delete <vlanList>
Grammar

Function Delete vlan。

<vlanlistt> Delete vlan list，Valid values :the combination of 1-4094，

Cianet. OLT CLI User Manual

Example :
delete vlan 10,20,30
delete vlan 100-120
delete vlan 10,100-110,200

Show vlan configuration of vlan

Command
epon#show vlan <vlanId>
Grammar

Function Show vlan configuration of vlan

all：show all current vlan configuration 。

<vlanId>
1-4094：show current vlan-id configration。

【Example】

Example 1：show all currnet vlan configuration：

epon# show vlan all

VLAN ID: 1
Tagged ports:
none
Untagged ports:
ge-9 ge-10 ge-11 ge-12 ge-13 ge-14 ge-15 ge-16
ge-1 ge-2 ge-3 ge-4 ge-5 ge-6 ge-7 ge-8

VLAN ID: 100

Tagged ports:
ge-1
Untagged ports:
none

5.6 Rstp configuration management

Enable/disable RSTP configuration

Command
epon# rstp <state>
Grammar

Enable/disable RSTP Function

Function
Cianet. OLT CLI User Manual

enable:enable Rstp Function

<state>
disable:disable Rstp Function

【Example】
Example 1：enable Rstp function
epon# rstp enable
Enable RSTP successful!
Example 2：disable Rstp function
epon# rstp disable
Disable RSTP successful!

Configure Rstp bridge maxage aging time

Command
epon# rstp bridge maxage <aging>
Grammar

Function Configure Rstp bridge maxage aging time

Range: 6-40
<aging> Bridge Max Age must be less than or equal to twice the the Bri
dge Forwarding Delay minus 1.

【Example】
Example 1：if the forward delay is a maximum of 15 s, configuring the biggest aging time is 28s
epon# rstp bridge maxage 28
Configure RSTP max age successful!

Configure Rstp bridge delay time

Command
epon# rstp bridge fdelay <fdelay>
Grammar

Function Configure Rstp bridge fdelay time

<fdelay> Range: 4-30s

【Example】
Example 1:configuring Rstp bridge delay time is 15s
epon# rstp bridge fdelay 15
Configure RSTP forward delay successful!
Cianet. OLT CLI User Manual

Configure Rstp bridge prioprity

Command
epon# rstp bridge priority <prio>
Grammar

Function Configure Rstp bridge prioprity

<prio> Range:p0-p65535

【Example】
example1：setting Rstp bridge priority is 0
epon# rstp bridge priority p0
Configure RSTP bridge priority successful!

Configure max counts of Rstp packet per second

Command
epon# rstp hold-count <count>
Grammar

Function Configure max counts of Rstp packet per second

<count> Range:1-10

【Example】
Example 1：Configure transmit 10 hold-counts of Rstp per second
epon# rstp hold-count 10
Configure RSTP transmit holle packet limit successful!

Configure Rstp port piority

Commad
epon# rstp port <protid> priority <prio>
Grammar

Function Configure Rstp port priority

<protid> Range；ge1-ge16

Value :p0,p16,p32,p48,p64,p80,p96,p112,p128,p144,p160,p17
<prio> 6,p192,p208,p224,p240
Cianet. OLT CLI User Manual

【Example】
Example 1：setting ge1 port priority is 0
epon# rstp port priority ge1 p0
GE(1)'s priority configuration successful!

Configure Rstp port path-cost

Command
epon# rstp port <protid> path-cost <pathcost>
Grammar

Function Configure Rstp port path-cost

<protid> Port

<pathcost> Port path cost

【Example】
Example 1：setting ge1 path-cost of Rstp is 2000
epon# rstp port ge1 path-cost 2000
GE(1)'s path cost configuration successful!

Configure Rstp edge-port

Command
epon# rstp port <protid> edgecfg <edge>
Grammar

Function Configure Rstp edge-port

<protid> Switch port

edge: edge

none-edge:none edge auto：

Automatic negotiation
<edge>
Note: the edge of the port don't need after discarding - learning -
forwarding steps, and direct conversion to the forwarding state, the
rest of the ports need to pass the above process

【Example】
Example 1：setting ge1 is edge of Rstp
Cianet. OLT CLI User Manual

epon# rstp port ge1 edgecfg edge

GE(1)'s edge attribute configuration successful!

Example 2：setting ge1 is auto configuration

epon# rstp port ge1 edgecfg auto

GE(1)'s edge attribute configuration successful!

Configure Rstp p2p port

Command
epon#rstp port <protid> p2pcfg <p2p>
Grammar

Function Configure Rstp p2p port

<protid> Switch port

Shared

p2p :p2p port auto：

Automatic negotiation
<p2p>
Note: p2p port to allow rapid transition to the forwarding state, shard
port need through discarding - learning - forwarding steps forward to
transition to the state

【Example】
Example：setting ge1 port is p2p port
epon# rstp port ge1 p2pcfg p2p
GE(1)'s link type configuration successful!

Configure Rstp protocol version check

Command
epon#rstp port <protid> p2pcfg mcheck
Grammar

Function Configure Rstp protocol version checlk

<protid> Switch port

【Example】
Example:1 Configure Rstp protocol version check
Cianet. OLT CLI User Manual

epon# rstp port ge1 mcheck

GE(1) force version successful!

Show Rstp information

Command
epon#show rstp <protid>
Grammar

Function Show Rstp information

<protid> Switch port

【Example】
Example 1：show Rstp information
epon# show rstp
RSTP Bridge Status:
RSTP Setting :Enable
Bridge ID [PRI-MAC] :1-e0:67:b3:00:00:00
Bridge Hello Time :2 sec
Bridge Max Age :25 sec
Bridge Forward Delay :15 sec
Transmit Hold Count :10
Root Bridge ID :1-e0:67:b3:00:00:00
Root Path Cost :0
RSTP Port Status:
GE Mode Pri PathCost EdgeC EdgeO P2pC P2pO State Role
1 RSTP 1 2000 Auto Edge P2P P2P LinkDown UNKNOWN
2 RSTP 128 20000 Auto NEdge Auto P2P LinkDown UNKNOWN
3 RSTP 128 20000 Auto NEdge Auto P2P LinkDown UNKNOWN
4 RSTP 128 20000 Auto NEdge Auto P2P LinkDown UNKNOWN
5 RSTP 128 20000 Auto NEdge Auto P2P LinkDown UNKNOWN
6 RSTP 128 20000 Auto NEdge Auto P2P LinkDown UNKNOWN
7 RSTP 128 20000 Auto NEdge Auto P2P LinkDown UNKNOWN
8 RSTP 128 20000 Auto NEdge Auto P2P LinkDown UNKNOWN
Total 8 RSTP ports dumped.

5.7 Trunk configuration managemnet

Enter trunk config mode

Command
epon# trunk <tid>
Grammar
Cianet. OLT CLI User Manual

Function Enter trunk config mode

<tid> Range:1-4

【Example】
Example 1：enter trunk 1 config mode view
epon# trunk 1
epon(trunk-1)#

Add port of trunk member

Command
epon(trunk-1)# member add <member>
Grammar

Function Add trunk’s member

<member> Porttlist

【Example】
Example 1 :add ge1-ge2 port of trunk 1 member
epon(trunk-1)# member add ge1-ge2

Delete port of trunk member

Command
epon(trunk-1)# member del <member>
Grammar

Function Delete port of trunk member

<member> Portlist

【Example】
Example1：delete ge1-ge2 of trunk 1 member
epon(trunk-1)# member del ge1-ge2

Delete trunklist configuraion

Command epon(trunk-1)# delete <trunkList>

Cianet. OLT CLI User Manual

Grammar

Function Delete trunklist configuration

<trunklist> Range: 1-4

【Example】
Example1：delete list 1-2 configuration of trunklist
epon(trunk-1)# delete 1-2

Show trunk information

Command
epon# show trunk <trunkid>
Grammar

Function Show trunk information

all：all of trunklist 。
<trunkid>
1-4：Specify the trunk group information

【Example】
Example 1：show all trunklist information
epon# show trunk all
TRUNK-1 Member PORTS:
GE-1
GE-2
TRUNK-2 Member PORTS:
GE-3
GE-4

5.8 Rmon network monitoring and configuration

clear all ports statistics

Command
epon# rmon statistics clear-all
Grammar

Function Clear all ports statistics

Cianet. OLT CLI User Manual

Delete the specified port configuration information

Command
epon# rmon statistics clear <port>
Grammar

Function Delete the specified port configuration information

<port> Interface, refer to above 2.3

【Example】
Example1：Delete the statistics RMON statistics from the GE1 interface
epon# rmon statistics clear ge1

rmon history configration

Add rmon history configration

Command epon# rmon history add <port> <entry-number>

Grammar <buckets-number> <interval> <owner>

Function Rmon history configration

<port> Switch port

<entry-number> History index，range:1-65535

<buckets-number> History Record number，range 1-65535

<interval> The time interval of history

<owner> Belongs to user

【Example】
Example 1：configue ge1 port rmon ‘s index is 1，inteval is 5 ,buckets-number is 5, owner is
user1
epon# rmon history add ge1 1 5 5 user1

Delete rmon history configuration

Command
epon# rmon history del < entry-number>
Grammar

Function Delete rmon history configuration

Cianet. OLT CLI User Manual

<entry-number> History infdex,range:1-65535

rmon event configuration

add rmon event configuration

Command epon#rmon event add <entry-number> <description> <type>

Grammar <owner>

Function Add rmon event configuration

<entry-number> Event index，range ：1-65535

<description> Description information

none；no log and no trap log：

Record the log information trap：
<type>
Record the trap information
log-trap:Record the log and trap information

<owner > Belongs to user

【Example】
Example 1：add rmon event 100
epon# rmon event add 100 rmon-event log yx

delete rmon event

Command
epon#rmon event del <entry-number>
Grammar

Function Delete rmon event

<entry-number> Range:1-65535

【Example】
Example 1：delete rmon event 100
epon# rmon even del 100
Cianet. OLT CLI User Manual

rmon alarm configuration

add rmon alarm configuration

epon#rmon alarm add <entry-number> <alarm-variable>

Command
<interval> <type> <rising-value> <rising-event> <falling-value>
Grammar
<falling-event> <owner>

Function Add rmon alarm

<entry-number> Range:1-65535

<alarm-variable> Oid ,snmp oid

<interval> Sampling interval

delta: Refers to two time interval only

<type >
absolute: Refers to achieve value within a specified period

<rising-value> Range:2147483648 - +2147483647

<rising-event> Rising event

<falling-value> range：2147483648 - +2147483647

<falling-event> Falling event

<Owner> owner

【Example】
Example 1：add alarm comfiguration that oid is 1.3.6.1.2.1.16.1.1.1.4.1 ,interval 5s
rising-value 40000，Rissing-event is 1，falling-event 20000，falling-event is 1 ,type is absolute
epon# rmon alarm add 1 1.3.6.1.2.1.16.1.1.1.4.1 5 absolute 40000 1 20000 1 yx

Delete rmon alarm configuration

Command
epon#rmon alarm del<entry-number>
Grammar

Function Delete rmon alarm configuration

<entry-number> Event index，range:1-65535

【Example】
Cianet. OLT CLI User Manual

Example1：delete rmon alarm 1

epon# rmon alarm del 1

Show rmon statistics information

Command
epon# show rmon statistics <port>
Grammar

Function Show rmon port statistics information

<port> Device port

【Example】
Example 1：show rmon statistics ge1
pon# show rmon statistics ge1
GE-1 Statistics:
etherStatsOctets 0 , etherStatsPkts 0
etherStatsBroadcastPkts : 0 , etherStatsMulticastPkts : 0
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments 0 , etherStatsJabbers :0
etherStatsCRCAlignErrors: 0 , etherStatsCollisions :0
etherStatsDropEvents 0
Packets received according to length:
64 :0 , 65-127 : 0 , 128-255 : 0
256-511 : 0 , 512-1023 : 0 , 1024-1518 : 0

Show rmon history information

Command
epon# show rmon history <port>
Grammar

Function Show rmon history information about port

<port> Switch port

【Example】
Example 1：show rmom history ge1
show rmon history ge1
HistoryControlEntry 100 owned by yx is VALID
Samples interface : GE-1
Cianet. OLT CLI User Manual

Sampling interval : 5(sec) with 5 buckets max

Sampled values of record 1 :
dropevents :0 , octets :0
packets :0 , broadcast packets :0
multicast packets :0 , CRC alignment errors : 0
undersize packets :0 , oversize packets :0
fragments :0 , jabbers :0
collisions :0 , utilization :0
Sampled values of record 2 :
dropevents 0 , octets :0
packets 0 , broadcast packets :0
multicast packets : 0 , CRC alignment errors : 0

show rmon event information

Command
epon# show rmon event <entry-number>
Grammar

Function Show rmon event information

<entry-number> Event entry-number，0 means all of event

【Example】
Example 1：show rmon event 1 information
epon# show rmon event 1
EventEntry 1 owned by log is VALID
Description : log
Will cause log when triggered.

Show rmon eventlog information

Command
epon# show rmon eventlog <entry-number>
Grammar

Function Show rmon eventlog information

<entry-number> Event entry-number ,0 means all of eventlog

【Example】
Example 1：show rmon eventlog 1
Cianet. OLT CLI User Manual

epon# show rmon eventlog 1

logEntry 1 is VALID.
Generates eventLog 1.1 at 01/01/00 00:31:25
Description : The alarm formula defined in prialarmEntry 1,
less than(or =) 4000 with alarm value 0. Alarm sample type is delta.
Generates eventLog 1.2 at 01/01/00 03:13:25
Description : The alarm formula defined in prialarmEntry 2,
less than(or =) 20000 with alarm value 0. Alarm sample type is
absolute.

Show rmon alarm information

Command
epon#show rmon alarm <entry-number>
Grammar

Function Show rmon alarm information

<entry-number> Alarm entry-number, 0 means all of alarm

【Example】
Example 1：show all of alarm of rmon information
epon# show rmon alarm 0
AlarmEntry 1 owned by yx is VALID
Samples type : absolute
Variable formula : 1.3.6.1.2.1.16.1.1.1.4.15<etherStatsOctets.15>
Sampling interval : 10(sec)
Rising threshold : 40000(linked with event 1)
Falling threshold : 20000(linked with event 1)
When startup enables : risingOrFallingAlarm
Latest value 0

5.9 Mirror port configuration management

Enable/disable mirror fuction

Command
epon# mirror admin <admin>
Grammar

Function Enable/disable mirror function。

Cianet. OLT CLI User Manual

enable:enable mirror fuction

<admin>
disable: disable mirror fuction

【Example】
Example 1：enable mirror function

epon# mirror admin enable

Set switch mirror enable successful !

Example 2：disable mirror function

epon# mirror admin disable

Set switch mirror disable successful !

Configure mirror source_port

Command
epon# mirror source_port <port> <type>
Grammar

Function Configure mirror source_port

<port> Switch port

none: soure_port have no set

egress: the packet of out_flow
<type>
ingress: the packet of in_flow
full：packet both of out_flow and in_flow

【Example】
Example 1：configure ge1 ingress mirror

epon# mirror source_port ge1 ingress

Set switch mirror source port: 1 successful!

Example 2：configure soure_port ge2 egress mirror

epon# mirror source_port ge2 egress

Set switch mirror source port: 2 successful!

Example 3，configure ge3 both of out_packet and in_packet

epon# mirror source_port ge3 full

Cianet. OLT CLI User Manual

Set switch mirror source port: 3 successful!

Configure mirror dest_port

Command
epon# mirror dest_port <port>
Grammar

Function Configure mirror dest_port

<port> Switch port

【Example】
Example 1：configure dest_port ge8
epon# mirror dest_port ge8
Set switch mirror destnation port: 8 successful

Show mirror information

Command
epon# show mirror
Grammar

Function Show mirror information

【Example】
Example 1：show mirror information
epon# show mirror
==================== SWITHC MIRROR CONFIG ====================
Admin : enable
destnationPort : ge8
sourceIngressPorts : ge2 ge3
sourceEgressPorts : ge1 ge3
sourceVlan :

5.10 Igmp-snooping monitoring and configuration

Enable/disable igmp snooping function

Command
epon# igmp-snooping admin <admin>
Grammar
Cianet. OLT CLI User Manual

Function Enable/disable igmp snooping function

<admin> <disable|enable>

Enable/disable igmp snooping fast-leave function

Command
epon# igmp-snooping fast-leave <admin>
Grammar

Function Enable/disable the igmp snooping fast-leave function

<admin> <disable|enable>

Enable/disable igmp snooping drop-unknown function

Command
epon# igmp-snooping drop-unknown <admin>
Grammar

Function Enable/disable the igmp snooping drop-unknown function

<admin> <disable|enable>

Configure igmp snooping host-aging-time

Command
epon# igmp-snooping host-aging-time <aging>
Grammar

Function configure IGMP Snooping host aging time

<aging> Aging time:<1~3000>s

Enable/disable igmp snooping querier function

Command
epon# igmp-snooping querier <admin>
Grammar

Function Enable/disable the igmp snooping querier function

<admin> <disable|enable>
Cianet. OLT CLI User Manual

Configure igmp snooping querier query interval

Command
epon# igmp-snooping querier interval <time>
Grammar

Function configure igmp query interval

<time> Query interval：<2~3000>S

Configure igmp snooping querier max-response-time

Command
epon# igmp-snooping querier max-response-time <time>
Grammar

Function configure igmp query max rsp time

<time> Query interval：<1~25>S

Configure igmp snooping querier source_ip

Command
epon# igmp-snooping querier source_ip <source_ip>
Grammar

Function configure igmp query source ip

<source_ip> <X.X.X.X>

Configure igmp snooping querier router-aging-time

Command
epon# igmp-snooping router-aging-time <aging>
Grammar

Function configure IGMP Snooping router aging time

<aging> <1~3000>S

add/delet igmp-snooping static port

Command epon# igmp-snooping static <operation> <multicast_ip> <vlan>

Grammar <port>

Function add or delete static igmp port

Cianet. OLT CLI User Manual

<operation> operation, <add|del>

<multicast_ip> multicast ip address, <x.x.x.x>

<vlan> vlan id, <1~4095>

<port> port, <ge1-ge8, pon1-pon8>

5.11 clear all learned mac address

Command
epon#reset mac-address-table
Grammar

Function clear all learned mac address

6 OLT Management

6.1 OLT basic configure management

Enter OLT Management

Command
epon#olt <oltID>
Grammar

Function Enter olt configure mode

<oltID> Pon ID : 1-8。

【Example】

Example 1：enter olt’s first pon configure mode：

epon#olt 1
epon(olt-1)#

epon(olt-1)# ？
acl - configure olt level acl
admin - enable or disable this PON
Cianet. OLT CLI User Manual

alarm - enable or disable the message of Alarm!

exit - exit current mode
mac-address-table - configure mac-address-table
offline-onu - add or delete offline onu
onu - configure onu
optical - olt optical diagnose
p2p - configure p2p
packet-filter - enable or disable packet filter
qinq - configure QinQ
tpid - configure olt default tpid
Global command:
logout - exit the CLI system
ping - test that a remote host is reachable
show - show system configuration
tracert - trace the route to host

Enable/disable OLT port

Command
epon(olt-1)#admin <enable | disable>
Grammar

Function enable/disabke OLT PON port. Default status is enable.

<eable> Enbale OLT PON port 1。

<disable> Disable OLT PON port 1。

Long light checking Function

Configuration all of onu about long light checking Function

Command
epon(olt-1)# optical lao
Grammar

Function ON optical tests under all the ONU, ONU luminous fault to kick off

Configure the specified onu about long checking fuction

Command
epon(olt-1)# optical lol <llid_1> <llid_2> <llid_3>
Grammar

Function Light tests specified under the PON ONU, luminous fault to kick off
Cianet. OLT CLI User Manual

Configure p2p Function

Command
epon(olt-1)# p2p <enable | disable>
Grammar

Enabel/disable OLT P2P function, when enable this function,each onu

Function
register to this pon can reach each other without uplink swicht

<eable> Enabel P2P

<disable> Disable P2P

Configure out-tpid Function

Command
epon(olt-1)# tpid out-tpid <tpid>
Grammar

Function Configure acl default tpid

<tpid> 0x8100, 0x9100, 0x88a8

6.2 OLT ACL Configure

Delete One ACL

Command
epon(olt-1)# acl <aclId> delete
Grammar

Function Delete the aclid’s acl

<aclId> Acl id number : <1-30>

【Example】

Example 1：delege olt 1 acl 1：

epon(olt-1)# acl 1 delete
Delete ACL 1 successfuly.
Cianet. OLT CLI User Manual

Delete Current OLT All ACL

Command
epon(olt-1)#acl delete
Grammar

Function Delete current olt’s all acl

【Example】

Example 1：delete olt1’s all acl：

epon(olt-1)# acl delete
Delete ACL 1 successfuly.

Add OLT ACL

Command epon(olt-1)#acl <aclId> rule <direction> <precedence> matching

Grammar “matching string” action “action string”

Function Add one acl in current olt

<aclId> value：<1-40>

<direction> Acl direction：<upstream|downstream>

<precedence> Acl priority：<4-7>

String to match, fomat is ："proto=12 dst-port=34".

Support the parameters as blow:
[dst-mac|src-mac] <xx:xx:xx:xx:xx:xx>
[tag-num] <0|1|2|more>
[top-vid|inner-vid] <vid|vidL-vidH>, vid:1~4094
matching string [top-8021p|inner-8021p] <8021p|8021pL-8021pH>, 8021p:0~7
[eth-type] <0~65535>
[dscp] <0~63>
[proto] <0~65535>
[dst-ip|src-ip] <x.x.x.x>
[dst-port|src-port] <0~65535>

Acton string, format as "8021p 7 dscp 63".

Support the parameters as blow：
action string
[cos] <0~7>
[8021p] <0~7>
Cianet. OLT CLI User Manual

[dscp] <0~63>
[fwd] <deny>
[rate] cir <> cbs <> pir <> pbs <>
[top-vlan | inner-vlan] <pop | push vid <1~4094> |
swap vid <1~4094>
【Example】

Example 1：Filtering the upstream frame of destination MAC address is 00:00:00:00:00:02

epon(olt-1)# acl 1 r u 4 m "dst-mac=00:00:00:00:00:02" a "fwd deny"

Example 2：Filtering the downstream of destination MAC address is 00:00:00:00:00:01,

tagged is with external VLAN 4094：
epon(olt-1)# acl 2 r d 4 m "dst-mac=00:00:00:00:00:01" a "top-vlan push vid 4094"

Example 3：Filtering the upstream frame with vlan 100, tagged it with external VLAN 200：
epon(olt-1)# acl 3 r u 4 m "top-vid=100" a "top-vlan push vid 200"

Example 4：Filtering the upstream frame of destination IP address is 198.19.1.2, tagged it

with external vlan 1000：
epon(olt-1)# acl 1 r u 4 m "dst-ip=198.19.1.2" a "top-vlan push vid 1000"

Example 5：Filtering the upstream frame of destionation port is port-2, tagged it with
external vlan 1000：
epon(olt-1)# acl 1 r u 4 m "dst-port=2" a "top-vlan push vid 1000"

6.3 OLT MAC Management

Configure OLT MACAge Time

Command
epon(olt-1)# mac-address-table aging-time <aging-time>
Grammar

Function Configure current olt’s mac age time

Age time: <0~65535> sec, when configure age time to 0, the mac will
<aging-time>
not ageout

【Example】

Example 1：configure current olt’s age time to 200s：

epon(olt-1)# mac-address-table aging-time 200
Set slot 1 olt 1 bridge cfg successfully!
Cianet. OLT CLI User Manual

Flush current olt’s mac table list

Command
epon(olt-1)# mac-address-table flush
Grammar

Function Flush current olt’s mac table list

Enable OLT MAC Learening function

Command
epon(olt-1)# mac-address-table learning enable
Grammar

Function Enable current olt’s mac learning function

Disable OLT MAC Learning Function

Command
epon(olt-1)# mac-address-table learning disable
Grammar

Function Disable current olt’s mac learning function

Enable MAC Move

Command
epon(olt-1)# mac-address-table move enable
Grammar

Function Enable mac move

Disable MAC Move

Command
epon(olt-1)# mac-address-table move disable
Grammar

Function Disable mac move

Cianet. OLT CLI User Manual

6.4 OLT Auth

Disable OLT Auth

Command
epon# auth disable
Grammar

Disable auth function, when the olt auth is disable, onu will register
Function
automatically.

Add/Delete/Show Whitelist

Add white member

Command
epon# auth whitelist add <oltID> onu <onu>
Grammar

Add white member. It will enable the Auth function when first add
Function
black member

<oltID> Pon ID : 1-8

<onu> ONU-MAC，format：00-01-02-AB-CD-EF

Example 1：add oun witch MAC 00-1b-62-48-5b-09 to whitelist：

epon# auth whitelist add 1 onu 00-1b-62-48-5b-09
Add ONU (00-1b-62-48-5b-09) to slot 1 PON 1 whitelist successfully.

Delete white member

Command
epon# auth whitelist delete <oltID> <onu>
Grammar

Function Delete white member

<oltID> Pon ID : 1-8

<onu> ONU-MAC，format：00-01-02-AB-CD-EF。

【Example】
Example 1：move onu with MAC 00-1b-62-48-5b-09 out from whitelist：
epon# auth whitelist delete 1 onu 00-1b-62-48-5b-09
Cianet. OLT CLI User Manual

01/01/00 01:47:59 onu-1-1-1 (ctc-30) offline...

Delete ONU (00-1b-62-48-5b-09) from slot 0 PON 1 whitelist successfully.

Show whitelist
Command
epon# show auth whitelist
Grammar

Function Show whitelist

【Example】
Example 1：show whitelist：
epon# show auth whitelist
whitelist onu mac:
pon-1 00-1b-62-48-5b-09
pon-2 00-13-25-00-dd-01
Total is 2.

Add/Delete/Show Blacklist

Add black member

Command
epon# auth blacklist add <oltID> onu <onu>
Grammar

Add black member. It will enable the Auth function when first add
Function
black member

<oltID> Pon ID : 1-8

<onu> ONU-MAC，format：00-01-02-AB-CD-EF。

【Example】
Example 1：add a black member that mac is 00-1b-62-48-5b-09：
epon# auth blacklist add 1 onu 00-1b-62-48-5b-09
01/01/00 02:15:41 onu-1-1-1 (ctc-30) offline...
Add ONU (00-1b-62-48-5b-09) to slot 1 PON 1 blacklist successfully.

Delete Black Member

Command
epon# auth blacklist delete <oltID> onu <onu>
Grammar

Function Delete black member

Cianet. OLT CLI User Manual

<oltID> Pon ID : 1-8

<onu> ONU-MAC，format：00-01-02-AB-CD-EF

【Example】
Example 1：move onu with MAC 00-1b-62-48-5b-09 out from blacklist：
epon# auth blacklist delete 1 onu 00-1b-62-48-5b-09
Delete ONU (00-1b-62-48-5b-09) from slot 1 PON 1 blacklist successfully.

Show blacklist

Command
epon# show auth blacklist
Grammar

Function Show blacklist

【Example】
Example 1：show blacklist：
epon# show auth blacklist
blacklist onu mac:
pon-1 00-1b-62-48-5b-09
pon-2 00-13-25-00-dd-01
Total is 2.

OLT hybrid Auth Mode Configure

Enable hybrid auth mode

Command
epon# auth ctc-mode hybrid
Grammar

Function enable hybrid auth mode

【Example】
Example 1：enable hybrd auth mode：
epon# auth ctc-mode hybrid
Set slot 1 hybrid-auth mode successfully.
Cianet. OLT CLI User Manual

OLT LOID Auth Mode Configure

Enable loid auth mode

Command
epon# auth ctc-mode loid
Grammar

Function enable LOID auth mode

【Example】
Example 1：enable loid auth mode
epon# auth ctc-mode loid
Set slot 1 loid-auth mode successfully.

Add loid account

Command
epon# auth ctc-mode add-loid <loid> password <password>
Grammar

Function Add LOID account

<loid> {MAX 24 Chars}

<password> {MAX 12 Chars}

【Example】
Example 1：add one loid account, name: cdt, password:cdt：
epon# auth ctc-auth loid add cdt password cdt

Delete loid account

Command
epon# auth ctc-mode delete-loid <loid> password <password>
Grammar

Function Delete LOID account

<loid> {MAX 24 Chars}

<password> {MAX 12 Chars}

【Example】
Example 1：delete a loid account：
epon(olt-8)# auth ctc-auth loid delete cdt password cdt
Cianet. OLT CLI User Manual

OLT MAC Auth Mode Configure

Command
epon# auth ctc-mode mac
Grammar

Function Enable OLT MAC Auth Mode

6.5 Configure packet_filter of OLT PON port

Packet_filter of OLT PON port about DHCP function

Command
epon(olt-1)# packet-filter dhcp <admin>
Grammar

Function Filter upstream flow about dhcp servers packet

enable:enable packet-filter dhcp

<admin>
disable：disable packet-filter dhcp

【Example】
Example 1：enable dhcp packet_fil ter function of olt
epon(olt-1)# packet-filter dhcp enable

EOC MME packet-filter function

Command
epon(olt-1)# packet-filter eoc_mme <admin>
Grammar

Function EOC MME packet filter

enable:enable eoc_mme function

<admin>
disable：disable eoc_mme function

【Example】
Example 1：enable eoc_mme packet-filter function
epon(olt-1)# packet-filter eoc_mme enable

Netbios packet-filter function

Command epon(olt-1)# packet-filter netbios <admin>

Cianet. OLT CLI User Manual

Grammar

Function netbios packet filter

enable:enable netbios function

<admin>
disable：disable netbios function

【Example】
Example 1：enable netbios packet-filter function
epon(olt-1)# packet-filter netbios enable

8306_rtk_loopback packet-filter function

Command
epon(olt-1)# packet-filter 8306_rtk_loopback <admin>
Grammar

Function 8306_rtk_loopback packet filter

enable:enable 8306_rtk_loopback function disable：

<admin>
disable 8306_rtk_loopback function

【Example】
Example 1：enable 8306_rtk_loopback packet-filter function
epon(olt-1)# packet-filter 8306_rtk_loopback enable

6.6 Configure trap alarm and message alarm function of ONU

Configure message alarm about ONU off the electricity

Command
epon(olt-1)# alarm onuDyingGasp <admin>
Grammar

Function ONU off the electricity ,it can print GASP message on the console

enable: enable message fuction。

<admin>
disable：disable message function。

【Example】
Example 1：Configure GASP message function，ONU off the electricity ,it can print GASP message on the
Cianet. OLT CLI User Manual

console
epon(olt-1)# alarm onuDyingGasp enable

Configure trap alarm about ONU off the electricity

Command
epon(olt-1)# alarm onuDyingGaspTrap <admin>
Grammar

Function ONU off the electricity,it can send trap message about GASP

enable:enable send trap of onu Dying Gasp!

<admin>
disable：disable send trap of onu Dying Gasp!。

【Example】
Example 1：after ONU off the electricit ，TRAP alarm will be sended to SNMP management
software
epon(olt-1)# alarm onuDyingGaspTrap enable

6.7 Configure QinQ function

Add QinQ configuration

Command
epon(olt-1)# qinq enable <qinq-vid> raw-vlan-id-inbound <vlan-list>
Grammar

Function Configure QinQ function

<qinq-vid> Outbound vlan

<vlan-list> inbound vlan list

【Example】
Example 1：setting QinQ configuration that inbound vlan_list is 50-90 and setting outbound
vlan is 100
epon(olt-1)# qinq enable 100 raw-vlan-id-inbound 50-90

Delete QinQ configuration

Command
epon(olt-1)# qinq disable <qinq-vid>
Grammar
Cianet. OLT CLI User Manual

Function delete QinQ f configuration

<qinq-vid> Outbond vlan

【Example】
Example 1：delete QinQ configuration that and setting outbound vlan is 100
epon(olt-1)# qinq disable 100

6.8 Configure offline ONU

Add offline ONU and bind the template with ONU

Command
epon#offline-onu add <onuID> <onuMAC> <templateID>
Grammar

Add offline ONU and bind the template with ONU. Template just can
only bind the offline ONU that no-bind with any template before. If
Function
offline ONU have binded template before, you need to delet the
template.

<onuID> onuID will be used when ONU online

<onuMAC> ONU mac address

When ONU online in the first time, OLT will set the ONU configuration
<templateID>
by template

delete offline ONU

Command
epon(olt-1)# offline-onu del <onuID>
Grammar

delete offline ONU. It must to delete offline ONU in OLT list before
Function
binding a new template with ONU

<onuID> Outbond vlan

Cianet. OLT CLI User Manual

6.9 Show olt configuration information

Show olt attribute information

Command
epon#show olt <oltID> attribute
Grammar

Function Show olt attribute information

<oltID> Pon port ID，range:1-8。

【Example】

Example1：show olt attribute information：

epon(olt-1)# show olt 1 attribute
Slot 1 olt 1 attributes:
Fw Version : 4.2.7.58
Cfg Version : 1.7.3.14
Loader Version : cefabeba
LLID Support : 64
LLID Registered : 3
LLID Online :3

Show olt optical information

Command
epon#show olt <oltID> optical
Grammar

Function Show olt optical information。

<oltID> Pon port ID，range:1-8

【Example】

Example1：show olt optical information

epon# show olt 1 optical
Slot 1 olt 1 optical informations:
Temperature : 45.28 (C)
Voltage : 2.30 (V)
Current : 1.23 (mA)
Tx Power : -6.45 (dBM)
Rx Power : 0.00 (dBM)
Cianet. OLT CLI User Manual

Show olt online-onu information

Command
epon#show olt <oltID> online-onu
Grammar

Function Show olt online-onu information。

<oltID> Pon port ID，range:1-8。

【Example】

Example1：show olt online-onu information：

epon(olt-1)# show olt 1 online-onu
onuId mac type CTC-Ver distance
onu-03 e0:67:b3:00:00:06 FD104HC 30 6m
onu-10 00:a1:02:01:30:d8 FD111H 20 6m
onu-11 e0:67:b3:07:d4:78 FD104HL 21 6m

Show olt acl information

Command
epon#show olt <oltID> acl
Grammar

Function Show olt acl information。

<oltID> Pon port ID，range:1-8。

【Example】

Example1：show olt acl information：

epon(olt-1)# show olt 1 acl
=================== SLOT 1 OLT 1 ACL 1 ===================
Direction : upstream
Precedence 4
Matching string : "dscp=63 "
Action string : "dscp=0 "

Show olt auth mode information

Command
epon# show auth mode
Grammar
Cianet. OLT CLI User Manual

Function Show olt auth mode information

【Example】

Example1：show olt auth mode information：

epon# show auth mode
Slot 1 current auth-mode is disable.

Show olt port staus information

Command
epon(olt-1)# show olt <oltId>admin
Grammar

Function Show olt port staus information

<oltId> Pon port ID，range:1-8

【Example】
Example1:show olt port staus
epon(olt-1)# show olt 1 admin
Slot 1 olt 1 admin status: Enable.

Show olt alarm information

Command
epon(olt-1)# show olt <oltId> alarm
Grammar

Function Show olt alarm information

<oltId> Pon port ID，range:1-8。

【Example】
Example1：show olt ararm information
epon# show olt 1 alarm
Onu Power Alarm : Disable
Onu Power Alarm Trap : Disable
Cianet. OLT CLI User Manual

Show olt learning-mac information

Command
epon(olt-1)# show olt <oltId> mac-address-table < onu>
Grammar

Function Show olt learning-mac information

<oltId> Pon port ID，range:1-8。

Don't pick up parameters:show mac address of all port

<onu>
With parameters :show mac address of specified port

【Example】
Example1：show mac address of all port 。
epon# show olt 5 mac-address-table
============== SLOT 1 OLT 5 MAC Address Table ==============
Index MAC Address ONU VID Aging(s)
1 3C:97:0E:FD:0C:69 02 0 3234

=========== 1 MAC Address Table Entries Found ===========

Show olt p2p information

Command
epon# show olt <oltId> p2p
Grammar

Function Pon port ID，range:1-8。

<oltId> Pon port ID，range:1-8。。

【Example】
Example1：show olt p2p information
epon# show olt 1 p2p
Slot 1 olt 1 p2p status: Enable

Show olt packet-filter information

Command
epon# show olt <oltId> packet-filter <type>
Grammar

Function Show olt packet-filter information

Cianet. OLT CLI User Manual

<oltId> Pon port ID，range:1-8。

【Example】
Example1：show olt packet-filter information
epon# show olt 1 packet-filter dhcp
=================== SLOT 1 OLT 1 Packet Filter===================
DHCP : enable

Show olt tpid out-tpid

Command
epon#show olt <oltid> tpid out-tpid
Grammar

Function Show olt tpid out-tpid

<oltId> Pon port ID，range:1-8。

7 ONU Management

7.1 Show ONU Basic Information

Show Online ONU

Command
epon# show olt 7 online-onu
Grammar

Use this command in any mode can check to the specified PON port
Function
of the Online-ONU.

【Example】

Example1：show online-onu
epon# show olt 7 online-onu
onuId mac type CTC-Ver distance
onu-12 e0:67:b3:00:00:04 FD112GM 30 6m
onu-13 e0:67:b3:00:00:14 FD114GM 30 6m
onu-14 e0:67:b3:07:14:04 FD101HC 30 6m
onu-23 e0:67:b3:07:18:02 FD104HC 30 6m
Cianet. OLT CLI User Manual

Show ONU Version

Command
epon# show olt 7 onu <onuid> ctc sn
Grammar

Function Show online-onu version.

<onuid> Designate online-onu onuid with value range from 1-64.

【Example】

Example1：show onu version

epon# show olt 7 onu 12 ctc sn
onu model : 0x3131326d
onu base-MAC : e0-67-b3-00-00-04
onu hardware Ver: V1.0
onu software Ver: V2.0.2

Show ONU Capabilities

Command
epon# show olt 7 onu <onuid> ctc capabilities
Grammar

Function Show online-onu capabilities.

<onuid> Designate online-onu onuid with value range from 1-64.

Show ONU Optical

Command
epon# show olt 7 onu <onuid> ctc optical
Grammar

Function Show online-onu optical.

<onuid> Designate online-onu onuid with value range from 1-64.

7.2 ONU Management Mode

Command
epon(olt-7)#onu <onuid>
Grammar
Cianet. OLT CLI User Manual

Function enter ONU management mode to configure ONU.

<onuid> designate onuid with valid value 1-64.

【Example】

Example1：enter onu 1 managemnet mode：

epon(olt-7)#onu 1
epon(olt-7/onu-1)#

epon(olt-7/onu-1)# input ”?” to show the following directory:

catv - enable or disable CATV
ctc - CTC configuration mode
default - restore to default setting
deregister - deregister current onu
exit - exit current mode
info - onu device user information
link - enter link configure mode
pon - configure onu PON
pots - configure VOIP port
protect - enable or disable to isolate the uni(s)
save - save current ONU configuration
uni - configure UNI
Global command:
logout - exit the CLI system
ping - test that a remote host is reachable
show - show system configuration
tracert - trace the route to host

7.3 ONU Basic Operation and Management

Reboot ONU

Command
epon(olt-7/onu-1)# ctc reboot
Grammar

Function reboot ONU.

Cianet. OLT CLI User Manual

Deregister ONU

Command
epon(olt-7/onu-1)# deregister
Grammar

Function deregister ONU.

Configure ONU FEC

Command
epon(olt-7/onu-1)# ctc fec <oper>
Grammar

Function Configure ONU fec.

value <enable/disable> enable：

<oper> enable ONU FEC function disable
：disable ONU FEC function

Restore ONU to Default Settings

Command
epon(olt-7/onu-1)#default
Grammar

Function restore ONU to default settings.

【Notes】

This command will delete all configuration of the ONU, restored to the factory default
configuration, and will automatically restart ONU.

Configure ONU Sys Management IP

Command epon(olt-2/onu-4)#ctc mng-ip <ip> <netmask> <gateway> <CVLAN>

Grammar <SVLAN>

Function configure onu sys management ip.

<ip> - example: 192.168.12.122

<netmask> - example: 255.255.255.0
Parameters <gateway> - example: 192.168.0.1
<CVLAN> - 0-4094
<SVLAN> - 0-4094
Cianet. OLT CLI User Manual

Save Current ONU Configuration

Command
epon(olt-7/onu-1)# save
Grammar

Function Save current onu configuration.

upgrade ONU software

Command
epon(olt-7/onu-1)# ctc upgrade <tftp-server> <image-file>
Grammar

Function Upgrade ONU software versions

<tftp-server> Tftp server Ip

<image-file> File name

7.4 Configure ONU IGMP

ONU IGMP Global Configuration

clear-all-multicast-ctrl-group

Command
epon(olt-7/onu-1)# ctc igmp clear-all-multicast-ctrl-group
Grammar

Function clear all multicast ctrl group.

Configure ONU IGMP fast-leave

Command
epon(olt-7/onu-1)# ctc igmp fast-leave <oper>
Grammar

Function Configure ONU igmp fast-leave function.

value <enable/disable> enable：

<oper> enable igmp fast-leavedisable：
disable igmp fast-leave
Cianet. OLT CLI User Manual

Configure ONU IGMP Mode

Command
epon(olt-7/onu-1)#ctc igmp mode < mode >
Grammar

Function configure ONU igmp mode.

valid value ： < gmp-mld-snooping controllable-igmp-mld igmp-

<mode> snooping-only controllable-igmp pass-through> Some of the
parameters may not support, the default is gmp-mld-snooping.

Configure ONU UNI Port IGMP

configure igmp group

Command
epon(olt-5/onu-7/uni-1)# ctc igmp max-group <groups>
Grammar

Function configure igmp group.

<groups> designate number of igmp groups with valid value <0-255>.

Configure igmp vlan

Command
epon(olt-5/onu-7/uni-1)# ctc igmp vlan-list < vlanTagList>
Grammar

Function configure igmp vlan.

<vlanTagList> valid value：1-4094，or null

Configure vlan tag

Command
epon(olt-5/onu-7/uni-1)# ctc igmp tag-handle <oper>
Grammar

Function configure igmp vlan tag or untag.

value：not-strip-vlan-tag
< Parameters > strip-vlan-tag
switch
Cianet. OLT CLI User Manual

7.5 Enter ONU Link Mode

enter ONU link mode

Command
epon(olt-7/onu-1)#link <linkID>
Grammar

Function enter ONU link mode.

<linkID> valid value：<1-8>

Configure ONU Link Upstream SLA

Command
epon(olt-7/onu-1/link-1)# sla upstream <fix> <cir> <pir> <weight>
Grammar

Function configure ONU LINK upstream speed limit.

<fix> valid value：<0~950000>Kbps

<cir> valid value：<1~950000>Kbps

<pir> valid value：<512~1000000>Kbps

<weight> valid value：<1~20>

Configure ONU Link Downstream SLA

Command
epon(olt-7/onu-1/link-1)# sla downstream <pir> <burst> <weight>
Grammar

Function configure ONU LINK downstream speed limit.

<pir> valid value：<512~1000000>Kbps

<burst> valid value：<128~16383>*256Byte

<weight> valid value：<0~15>

Cianet. OLT CLI User Manual

Configure ONU Link Acl

Command epon(olt-7/onu-1/link-1)#acl <Aclid> rule <direction> <precedence>

Grammar matching <matching string> action <action string>

Function configure ONU link acl rule.

<aclid> valid value：1-8

<direction> parameters：upstream downstream

<precedence valid value：<4-7>

parameters：
[dst-mac] <xx:xx:xx:xx:xx:xx>.
[src-mac] <xx:xx:xx:xx:xx:xx>.
[tag-num] <0 | 1 | 2 | more>.
[top-vid] <vid | vidL-vidH>, vid:1~4094.
[inner-vid] <vid | vidL-vidH>, vid:1~4094.
[top-8021p] <8021p | 8021pL-8021pH>, 8021p:0~7.
<matching
[inner-8021p] <8021p | 8021pL-8021pH>, 8021p:0~7.
string>
[eth-type] <0~65535>.
[dscp] <0~63>.
[proto] <0~65535>.
[dst-ip] <x.x.x.x>.
[src-ip] <x.x.x.x>.
[dst-port] <0~65535>.
[src-port] <0~65535>.

parameters：
[cos] <0~7>.
[8021p] <0~7>.
[dscp] <0~63>.
[fwd] deny.
[rate] cir <cir> cbs <cbs> pir <pir> pbs <pbs>,
<actionstring> cir, pir: <0~1000000>Kpbs. cbs, pbs: <0~4095>KB
[top-vlan] pop.
[top-vlan] push vid <1~4094>.
[top-vlan] swap vid <1~4094>.
[inner-vlan] pop.
[inner-vlan] push vid <1~4094>.
[inner-vlan] swap vid <1~4094>.

【Example】
Cianet. OLT CLI User Manual

Example1：configure ONU link acl 1 rule

epon(olt-7/onu-1/link-1)#acl 1 rule upstream 4 matching dst-mac=00:11:11:11:11:11 action fwd
=deny

7.6 enable/disable ONU port isolate function

Command
epon(olt-7/onu-1)# protect <admin>
Grammar

Function Enable/disable ONU port isolate function.

< admin> <enable | disable>

7.7 Configure ONU pon statistics

epon(olt-7/onu-1)# pon ctc statistics <monitoring-status>

Command Grammar
<monitoring-period>

Function Configure ONU pon statistics

< monitoring-status> <disable | enable>

< monitoring-period> 1-4294967295 second

7.8 Enable/disable ONU CATV port

Command
epon(olt-7/onu-1)# catv <state>
Grammar

Function Enable/disable ONU CATV port

< admin> <enable | disable>

7.9 Enter ONU Uni Port Management Mode

Command
epon(olt-7/onu-1)# uni <uni>
Grammar
Cianet. OLT CLI User Manual

enter the ONU uniport management mode to configure the ONU uni
Function
parameter.

< uni> designate ONU uni port with valid value <1-24>.

【Example】

Example1：enter the ONU uni port 1 management mode：

epon(olt-7/onu-1)#uni 1
epon(olt-7/onu-1/uni-1)#

epon(olt-7/onu-1/uni-1)# ？ input ”?” to show the following directory:

ctc - ctc management mode
exit - exit current mode
Global command:
debug - debug
disable - entry guest level
logout - exit the CLI system
show - show system configuration

Configure ONU Uni Port Parameters

Show ONU Uni port information

Command
epon(olt-7/onu-1/uni-1)# show olt 7 onu 1 uni 1 ctc attribute
Gramma

Using the command in any mode,can display the current ONU uni
Function
port parameter properties.

【Example】

Example1：show ONU uni port 1 information：

epon(olt-7/onu-1/uni-1)> show olt 7 onu 1 uni 1 ctc attribute
ONU-7/1 UNI-1 Attibute
Link-State : linkUp
Admin-State : Enable
FlowCtrl-State : Enable
AutoNego-State : Enable
Ingress-Rate : 0 kps
Egress-Rate : 0 kps

configure ONU Uni port storm control

Command epon(olt-7/onu-1/uni-1)# storm-ctrl <type> <admin> <rate>
Cianet. OLT CLI User Manual

Gramma

Function Configure ONU Uni port storm control

<none|broadcast|multicast|broadcast-multicast|unknown-uc|broad
<type>
cast-unknown-uc|multicast-unknown-uc|bc-mc-unknown-uc>

<admin> <enable|disable>

<rate> [0-16777215], unit(bps)

enable or disable ONU Uni port

Command
epon(olt-7/onu-1/uni-1)#ctc admin <oper>
Gramma

Function enable or disable ONU current port

value <enable | disable>：

<oper> enable：enable ONU port
disable：disable ONU port

configure ONU Uni port auto-nego

Command
epon(olt-7/onu-1/uni-1)#ctc auto-nego <oper>
Gramma

Function enable or disable ONU uni port auto-nego

value <enable | disable>：

<oper> enable: enable ONU uni port auto-nego
disable: disable ONU uni port auto-nego

configure ONU Uni port flow-ctrl

Command
epon(olt-7/onu-1/uni-1)#ctc flow-ctrl <oper>
Gramma

Function enable or disable ONU uni port flow-ctrl.

value <enable | disable>：

<oper> enable： enable ONU uni port flow-ctrl
disable：disable ONU uni port flow-ctrl

Configure ONU Uni port Egress Rate

Command epon(olt-7/onu-1/uni-1)#ctc egress-policing < max-rate>

Cianet. OLT CLI User Manual

Gramma

Function configure ONU uni port egress rate。

designate max traffic ouput rate with value<0~1000000>kbps，

< max-rate>
a value of 0 indicates no speed limit.

Configure ONU Uni port ingress Rate

Command
epon(olt-7/onu-1/uni-1)#ctc ingress-policing < max-rate>
Gramma

Function configure ONU uni port ingress rate.

designate max traffic input rate with value<0~1000000>kbps，

< max-rate>
a value of 0 indicates no speed limit

Configure ONU Uni port MAC agine-time

Command
epon(olt-7/onu-1/uni-1)#ctc mac-aging-time <timer>
Gramma

Function configure ONU uni port MAC aging-time.

designate the MACs aging-time with value 0-4294967295

< timer >
，a value of 0 indicates the MAC address is not aging。

configure ONU Uni port statistics

Command epon(olt-7/onu-1/uni-1)#ctc statistics <monitoring-status>
Gramma <monitoring-period>

Function Configure statistics monitoring status and period.

designate statistics monitoring status with value <enable | disable>

<monitoring-sta
enable: enable statistics monitoring
tus>
disable: disable statistics monitoring

<monitoring-pe designate statistics monitoring status with value

riod> <1-4294967295>second

Configure ONU Uni Port Vlan Mode

Configure ONU Uni port VLAN aggregation mode （Our company does not support ONU）
Command epon(olt-7/onu-1/uni-1)#ctc vlan-mode aggregation <tpid> <cos>
Gramma <default-vlan> aggregation-list（Matching）
Cianet. OLT CLI User Manual

Function configure the ONU uni port VLAN for aggregation mode.

<tpid > designate vlan tpid，the default is 0x8100.

<cos> designate vlan cos，valid value <0-7>.

designate ONU uni port aggregation mode vlan ， valid value

<vlan>
<1-4094>，the default is 1.

Aggregation-list designate ONU uni port aggregation vlan list，maximum support 4.

【Example】

Example1：For the ONU uni port configuration VLAN mode for aggregation, 100 fordefault-
vlan
epon(olt-7/onu-1/uni-1)> ctc vlan-mode aggregation 0x8100 7 100

Configure ONU Uni port VLAN tag mode

Command
epon(olt-7/onu-1/uni-1)#ctc vlan-mode tag <tpid> <cos> <vlan>
Gramma

Function configure the ONU uni port VLAN for tag mode.

<tpid > designate vlan tpid，the default is 0x8100.

<cos> designate vlan cos，valid value <0-7>.

designate ONU uni port tag mode vlan，valid value <1-4094>，the

<vlan>
default is 1

【Example】

Example1：For the ONU uni port configuration VLAN mode for tag, 100 for VLAN
epon(olt-7/onu-1/uni-1)> ctc vlan-mode tag 0x8100 7 100

Configure ONU Uni port VLAN trunk mode

Command epon(olt-7/onu-1/uni-1)#ctc vlan-mode trunk <tpid> <cos>
Gramma <default-vlan> vlan-list（Matching）

Function configure the ONU uni port VLAN for trunk mode.

<tpid > designate vlan tpid，the default is 0x8100

<cos> designate vlan cos，valid value <0-7>.

<vlan> designate ONU uni port trunk mode vlan，valid value <1-4094>，the
Cianet. OLT CLI User Manual

default is 1.

Optional configuration, configuration can be through the VLAN list,

Vlan-list
the maximum support 60 VLAN number.

【Example】

Example1：For the ONU uni port configuration VLAN model for trunk, 100 for default-vlan,
200,2050 for vlan-list
epon(olt-7/onu-1/uni-1)> ctc vlan-mode trunk 0x8100 7 100 vlan-list 200,2050

Configure ONU Uni port VLAN translation mode

Command epon(olt-7/onu-1/uni-1)#ctc vlan-mode translation <tpid> <cos>
Gramma <default-vlan> translate-list

Function configure the ONU uni port VLAN for translation mode.

<tpid > designate vlan tpid，the default is 0x8100.

<cos> designate vlan cos，valid value <0-7>.

designate ONU uni port translation mode vlan，valid value <1-4094>，

<vlan>
the default is 1.

The specified uni port list of VLAN, maximum support 8 conversion

translation-list
list.

【Example】

Example1：For the ONU uni port configuration mode of VLAN translation, default-vlan 100,
translation-list 200-300 300-400
epon(olt-7/onu-1/uni-1)> ctc vlan-mode trunk 0x8100 7 100 translation-list 200-300,300-400

Configure ONU Uni port VLAN transparent mode

Command
epon(olt-7/onu-1/uni-1)#ctc vlan-mode transparent
Gramma

Function configure the ONU uni port VLAN for transparent mode.

【Example】

Example1：For the ONU uni port configuration VLAN mode for transparent
epon(olt-7/onu-1/uni-1)> ctc vlan-mode transparent
Cianet. OLT CLI User Manual

【Description】

Different VLAN mode to deal with different frame types.

Transparent Mode：
Frame
Frame Type Approach
Direction
Untag frame Untag frame does not make any change, forwarding.
Upstream Tag frame does not make any changes (original VLAN
Tag frame
TAG), forwarding.
Untag frame Untag frame does not make any change, forwarding.
Downstream Tag frame does not make any changes (original VLAN
Tag frame
TAG), forwarding.

Tag Mode：
Frame
Frame Type Approach
Direction
Untag frame Switch frames on port’s default VLAN(VPID),forwarding.
Upstream
Tag frame Discard the frame
Untag frame Discard the frame
If the Downstream Tag frame VLAN ID equal to the
configuration of the VID，According to VID forwarded to
Downstream
Tag frame the appropriate UNI port, and stripping the tag; If the
downstream Tag frame VLAN ID is not equal to the
configuration of the VID, then the frame is discarded

Translation Mode：
Frame
Frame Type Approach
Direction
Untag frame Switch frames on port’s default VLAN(VPID),forwarding.
Tag frame VLAN ID in the configuration of the VID
Upstream conversion list, forwarding; Tag frame VLAN ID is not in
Tag frame
the configuration of the VID conversion list, frame
discarding.
Untag frame Discard the frame
Tag frame VLAN ID corresponds to the entry in the
corresponding port of the VLAN Translation list (equal to
the input VID configuration)，According to the table to
Downstream convert the VID to a corresponding VID (VID output),
Tag frame
forwarding; If the VLAN ID in the corresponding port of
the VLAN Translation list without a corresponding entry,
discarding; If the TAG frame with VLAN ID as the "default
VLAN", after the VLAN label forwarding is stripped down;
Cianet. OLT CLI User Manual

Trunk Mode：
Frame
Frame Type Approach
Direction
Untag frame Switch frames on port’s default VLAN(VPID),forwarding.
Tag frame VLAN ID belongs to the port "allowed by
Upstream
Tag frame VLAN", forwarding; Tag frame VLAN ID does not belong to
the port of the "permitted by VLAN," is discarded
Untag frame Discard the frame
Tag frame VLAN ID belongs to the port "allowed by
VLAN", forwarding; Tag frame VLAN ID belongs to the
Downstream
Tag frame port "allowed by VLAN", forwarding; If the Tag frame
VLAN does not belong to the port of the "permitted by
VLAN," is discarded.

Show ONU Uni port vlan configuration

Command
epon(olt-7/onu-1/uni-1)#show olt 7 onu 1 uni 1 ctc vlan-mode
Gramma

Function Show ONU uni port vlan configuration

【Example】

Example1：Show ONU uni port vlan configuration：

epon(olt-7/onu-1/uni-1)> show olt 7 onu 1 uni 1 ctc vlan-mode
VLAN MODE: translate
Default VLAN: TPID-0x8100, COS-6, VID-3
Traslate List:
2000<->3000
2050<->3050

7.10 Enter ONU VOIP Port Management Mode

Command
epon(olt-7/onu-1)# pots <pots>
Grammar

enter the ONU voip port management mode to configure the ONU
Function
uni parameter.

< pots> designate ONU voip port with valid value <1-2>.
Cianet. OLT CLI User Manual

【Example】

Example1：enter the ONU VOIP port 1 management mode：

epon(olt-7/onu-1)#pots 1
epon(olt-7/onu-1/pots-1)#

epon(olt-7/onu-1/pots-1)# ？ input ”?” to show the following directory:

ctc - ctc management mode
exit - exit current mode
Global command:
logout - exit the CLI system
ping - test that a remote host is reachable
show - show system configuration
tracert - trace the route to host

Configure ONU VOIP Port Parameters

Show ONU VOIP port work status

Command
epon(olt-7/onu-1/pots-1)# show olt 7 onu 1 pot 1 ctc status
Gramma

Using the command in any mode,can display the current ONU VOIP
Function
port parameter properties.

【Example】

Example1：show ONU VOIP port 1 work status

epon(olt-7/onu-1/pots-1)# show olt 7 onu 1 pot 1 ctc status
ONU-7/1 POTS-1 Attibute
Admin-State : Disable
IADPots-State : Registering
IADPots-ServiceState : Endlocal
IADPots-CodeMode : G711A

Enable/disable the ONU VOIP port

Command
epon(olt-7/onu-1/pots-1)# ctc admin <admin>
Gramma

Function Enable or disable the onu voip port

< admin> <enable | disable>：

Cianet. OLT CLI User Manual

enable open the voip port

disable close the voip port

【Example】

Example1：enable the ONU1 VOIP port 1

epon(olt-7/onu-1/pots-1)# ctc admin enable

Configure the VOIP port H.248 user TID

Command
epon(olt-7/onu-1/pots-1)# ctc h248-user-tid <User-TID>
Gramma

Function Configure the VOIP port h.248 user TID

< User-TID> String, length :32 chars

【Example】

Example1：configure ONU 1 VOIP 1 H.248 user TID is 100

epon(olt-7/onu-1/pots-1)# ctc h248-user-tid 100

Configure the VOIP port sip user parameter

Command ctc
epon(olt-7/onu-1/pots-1)# sip-user-config <user-account>
Gramma <user-name> <user-password>

Function Configure ONU voip port SIPuser parameter

< user-account> The number of user，string length:16 chars

<user-name> User name，string length:32 chars

<user-password> User password，string length:32 chars

【Example】

Example1：add a user in onu 1 voip port 1, the name is 222, the password is 222
epon(olt-7/onu-1/pots-1)# ctc sip-user-config 1 222 222
Cianet. OLT CLI User Manual

8 Equipment diagnosis information

8.1 Ping command test

Command
epon# ping <host>
Grammar

Function Test equipment and network can reach the target host

<host> Host ip address

【Example】

Example1：device ip: 192.168.1.100，host ip 192.168.1.234 host and device are The direct
connection
epon(GE-1)# ping 192.168.1.234
PING 192.168.1.234 (192.168.1.234): 56 data bytes
64 bytes from 192.168.1.234: seq=0 ttl=64 time=8.559 ms
64 bytes from 192.168.1.234: seq=1 ttl=64 time=0.746 ms
64 bytes from 192.168.1.234: seq=2 ttl=64 time=0.561 ms
64 bytes from 192.168.1.234: seq=3 ttl=64 time=0.650 ms

8.2 Tracert checking the device the path of the host

Command
epon# tracert <host>
Grammar

Function Check the device the path of the host

<host> Host ip address

【Example】
Example1： checking the device the path of the host。
epon(GE-1)# tracert 192.168.1.234
traceroute to 192.168.1.234 (192.168.1.234), 10 hops max, 38 byte packets
1 192.168.1.234 (192.168.1.234) 4.698 ms 0.060 ms 0.069 ms
Cianet. OLT CLI User Manual