Scribd
Upload
24 views

Control 7

The document discusses control systems including open-loop and closed-loop control. It covers topics such as modeling physical systems using transfer functions and state-space equations, feedback control, stability analysis using poles and zeros, and performance analysis including transient and steady-state response characteristics.

Uploaded by

NANDHAKUMAR A
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
24 views

Control 7

The document discusses control systems including open-loop and closed-loop control. It covers topics such as modeling physical systems using transfer functions and state-space equations, feedback control, stability analysis using poles and zeros, and performance analysis including transient and steady-state response characteristics.

Uploaded by

NANDHAKUMAR A
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 21

Review

1. Pay attention to basic terminologies and


concepts, basic formulas, and basic skills.

2. Understand the examples and homework

3. Reading materials: book, lecture notes and


homework
Review
Chapter two:
Closed-loop control, basic components, modeling physical
system, linearization, Laplace transformation, transfer function
pole& zero, final value theorem, block diagram reduction, Mason’
Gain formula
Chapter three:
state space equation; state transition matrix, controllability,
observability

Chapter four:
Closed-loop system vs open loop, sensitivity function, disturbance
response, parameter variation, steady state error

Chapter five:
Standard test inputs, step response for second order
systems, dominant closed-loop poles for high order system, steady
state error and system type, error constants for unit feedback
system
Open-loop control

Negative feedback
?
volatge velocity

M=C b=1/R K=1/L

Velocity=Voltage Force =current


s = σ + jω
Pole & Zero
Mass-spring-damper system
G(s)=output(s)/ input(s)

G(s)=C(s)/R(s) With zero initial conditions.


G(s)=output(s)/ input(s)
Y(s) = G(s)Ea (s),

Ea (s) = R(s) − B(s)


= R(s) − H (s)Y (s).

Y(s) = G(s)Ea (s) = G(s)[R(s) − H(s)Y(s)].


Y(s)[1+G(s)H(s)]= G(s)R(s).
Y (s) G (s)
=
. R( s) 1 + G ( s) H (s)

• Note: when H ( s ) ≠ 1 ⇒ E a ( s ) ≠ E ( s ) E (s) = R (s) − Y (s)


State-Variable Models

The state-variable model, or state-space model


• A particular differential equation model
•Equations are written in a specific format
expressed as n first-order coupled differential
equations, but the choice of states is not unique
• All choices of state variables preserve the
system’s input-output relationship (that of the
transfer function)
The Performance of Feedback
Control Systems
• The ability to adjust the transient and steady-state performance
is a distinct advantage of feedback control system.

• The performance of the control system is specified in terms of


both the transient response and stead-state response.

- The transient response is the response that disappears


with time.
- The steady-state response is that which exists a long time
following any inputs signal initiation.

• The design specifications for control systems normally include


several time-response indices for a specified input command
as well as a desired steady-state accuracy.
Response for second order systems
Transfer function: ω n2
G (s) = 2
s + 2ζω n s + ω n2
Characteristic equation: s 2 + 2ζωn s + ωn2 = 0
Im(s )
Poles: s1, 2 = −ζωn ± jωn 1 − ζ 2

Time domain response ωn 1−ζ 2


requirements can be translated
into pole positions
− ζω n Re(s )

cos −1 ζ
time
constant

For higher order system, we have seen in oscillation frequency


chapter 2 that the response of a system is
simply the sum of the response associated with
each pole. The transient response is dominated
by poles closer to the imaginary axis.
S-Plane and Transient Response

You might also like