Scribd
Upload
233 views2 pages

Esab Fabricator em 500i Arc Welding Equipment

The Fabricator EM 500i is a heavy-duty inverter power source for MIG/MAG and MMA welding. It is built to withstand rugged industrial use and works well with the Fabricator Feed wire-feeder for heavy industries using solid and flux-cored wires. It has wide input voltage tolerance for stable welding output, variable inductance control for better arc performance, and high efficiency to save energy with low idle power. It is IP23 rated for outdoor use and has insulation class H for continuous heavy duty applications.

Uploaded by

Khaled Mekhamer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
233 views2 pages

Esab Fabricator em 500i Arc Welding Equipment

The Fabricator EM 500i is a heavy-duty inverter power source for MIG/MAG and MMA welding. It is built to withstand rugged industrial use and works well with the Fabricator Feed wire-feeder for heavy industries using solid and flux-cored wires. It has wide input voltage tolerance for stable welding output, variable inductance control for better arc performance, and high efficiency to save energy with low idle power. It is IP23 rated for outdoor use and has insulation class H for continuous heavy duty applications.

Uploaded by

Khaled Mekhamer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FABRICATOR EM 500i

Rugged and Reliable Power Source

Fabricator EM 500i is a heavy duty inverter controlled


power sources for MIG/MAG and MMA (Stick) welding.
Built to withstand rugged use which makes it a perfect
solution for industrial usage. Ideal for heavy industries
using solid and flux-cored wires together with
Fabricator Feed wire-feeder.

 Wide Input voltage sustenance for stable


welding output.

 Variable inductance control for better arc


performance.

 Energy savings with high power factor,


high efficiency and low idle power.

 IP 23 class for outdoor use.

 Insulation Class H for continuous


heavy duty usage

 4 Roll Drive Wire-feeder-smooth and


stable wire-feeding.

Visit esabindia.com for more information.

Industry

 General Fabrication

 Construction

 Shipbuilding

 Railways

Fabricator EM 500i Feed 364


Specification
Mains Supply, V/ Ph, HZ 380-440( ± 10%)/3, , 50/60
Permitted Load at 60% Duty Cycle (MIG/MMA), A 500
Permitted Load at 100% Duty Cycle (MIG/MMA), A 390
Current Range (MIG/ MMA), A 30-500
Voltage Range (MIG), V 15.5-39
Efficiency at Max Current, % 87
Power Factor Max Current 0.93
No Load Power, W < 50
Dimensions L x W x H, mm 710 × 325 × 470
Weight, Kg 62
Enclosure Class IP23S
Application Class S
Insulation Class H
Wire- Feeder Feed 364
Wire-Feed Drive 4 Roll
Wire Feed Speed, m/min 2.0-20.0
Wire Spool Capacity, kg 18
Max Spool Diameter, mm 300
Wire Dimensions, mm
MS/ SS/ AL 1.0 -1.6
Cored Wire 0.8 -1.6

Ordering Information
Description Part number
Fabricator EM 500i 0700020002
Fabricator EM 500i Feed 364 0700020003
Cable set 5m, 7pin, 70mm2- Feed 364 0349490624
Cable set 10m, 7pin, 70mm2- Feed 364 0349490608
PSF 515, 5m 0700025052
DURA CO2 4330180500
CO2 Heater + Core 110V (ALD) 0651689045
Savage A40 9-13 Yellow 0700000481 2020-07-13 / ESAB reserves the right to alter specifications without prior notice.

Welding Hand Gloves (5 pair) 2001005011


Welding Apron (Large) 2001007001
Welding Sleeve 2001007002
Welding Leg Guard 2001007003
Note : Fabricator EM 500i is delivered with 4.5 mains cable, 5m return cable with earth clamp.

www.esabindia.com

You might also like