MDO-2000A Series

Channels Bandwidth (-3dB) Rise time Bandwidth Limit (-3dB)

MDO-2102A 2ch+Ext DC~100MHz 3.5ns 20MHz
MDO-2102AG 2ch+Ext DC~100MHz 3.5ns 20MHz
MDO-2202A 2ch+Ext DC~200MHz 1.75ns 20M/100MHz
MDO-2202AG 2ch+Ext DC~200MHz 1.75ns 20M/100MHz
MDO-2302A 2ch+Ext DC~300MHz 1.17ns 20M/100/200MHz
MDO-2302AG 2ch+Ext DC~300MHz 1.17ns 20M/100/200MHz

*MDO-2000AG provides dual channel 25MHz AWG

MDO-2000A series Specifications

MDO-2102A/AG MDO-2202A/AG MDO-2302A/AG
Channels 2CH+ EXT.
Bandwidth(-3dB)
DC~100MHz DC~200MHz DC~300MHz

Rise time 3.5ns 1.75ns 1.17ns

Bandwidth Limit 20MHz 20M/100MHz 20M/100M/200MHz
Vertical Sensitivity
8 bit
Resolution
1mV~10V/div
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
±(3%)when 2mV/div or greater is selected
DC Gain Accuracy
±(5%)when 1mV/div is selected;
Polarity Normal & Invert
Maximum Input
300Vrms, CAT I
Voltage
1mV/div ~ 20mV/div : ±0.5V
Offset Position 50mV/div ~ 200mV/div : ±5V
Range 500mV/div ~ 2V/div : ±25V
5V~10V/div : ±250V
Waveform Signal
+, -, ×, ÷, FFT, User Defined Expression.
Process
FFT: 1Mpts
FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman.
Trigger
Source CH1 ,CH2 Line, EXT
Trigger Mode Auto (supports Roll Mode for 100ms/div or slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate, Time
Trigger Type
out, Event-Delay(1~65535 events), Time-Delay(Duration,4nS~10S), Bus
Holdoff range 4ns~10s
Coupling AC, DC, LF rej., HF rej. , Noise rej.
Sensitivity 1div
External Trigger
Range ±15V
DC ~ 100MHz Approx.100mV
Sensitivity 100MHz ~ 200MHz Approx. 150mV
200MHz ~ 300MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal
1ns/div ~ 100s/div (1-2-5 increments)
Time base Range
ROLL: 100ms/div ~ 100s/div
Pre-trigger 10 div maximum
Post-trigger 2,000,000 div maximum.
Time base Accuracy ±50 ppm over any ≥ 1ms time interval
Real Time Sample
Max.:2GSa/s
Rate
Record Length Per Channel 20M pts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection 2ns (typical)
Average selectable from 2 to 256
X-Y Mode
X-Axis Input Channel 1
Y-Axis Input Channel 2
Phase Shift ±3° at 100kHz
Cursors and Measurement
Cursors Amplitude, Time, Gating available unit: Seconds(s), Hz(1/s) ,Phase(degree) ,Ration(%)
38 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Automatic Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime,
Measurement +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, %Flicker ,Flicker Idx,FRR, FRF, FFR,
FFF, LRR, LRF, LFR, LFF, Phase
Control Panel Function
Auto counter 6 digits, range from 2Hz minimum to the rated bandwidth
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with
Autoset
undo Autoset
Save Setup 20 sets
Save Waveform 24 sets
Display
TFT LCD Type 8" TFT LCD WVGA color display
Display Resolution 800 horizontal × 480 vertical pixels (WVGA)
Interpolation Sin(x)/x
Waveform Display Dots, vectors, variable persistence (16ms~4s), infinite persistence
Waveform Update
120,000 waveforms per second, maximum
Rate
Display Graticule 8 x 10 divisions
Display mode YT ;XY
Interface
USB Port USB 2.0 High-speed host port X1, USB 2.0 High-speed device port X1
Ethernet(LAN) Port RJ-45 connector, 10/100Mbps with HP Auto-MDIX
Go-NoGo BNC 5V Max/10mA TTL open collector output
Kensington Style
Rear-panel security slot connects to standard Kensington-style lock.
Lock
Spectrum Analyzer Specifications
Frequency range DC~1GHz (Max. ,Max.bandwidth~1GHz uncalibrated)
Span 1kHz~1GHz(Max.)

Resolution 1Hz ~ 1MHz(Max.)

bandwidth
Reference level -50 dBm to +40dBm in steps of 5dBm
Vertical units dBV RMS; Linear RMS; dBm
Vertical position -12divs to +12divs
Vertical scale 1dB/div to 20dB/div in a 1-2-5 Sequence
Display average 1V/div < -50dBm, Avg : 16
noise level 100mV/div < -70dBm, Avg : 16
10mV/div < -90dBm, Avg : 16
Spurious response 2nd harmonic distortion< 40dBc
3rd harmonic distortion< 45dBc
Frequency domain
Normal ; Max Hold ; Min Hold ; Average (2 ~ 256)
trace types
Detection methods Sample ; +Peak ; -Peak ; Average
FFT Windows FFT Factor :
Hanning 1.44
Rectangular 0.89
Hamming 1.30
Blackman 1.68
AWG Specifications (On MDO-2000AG only)
Channels 2
Sample Rate 200 Msa/s
Vertical Resolution 14 bits
Max. Frequency 25 MHz
Waveforms Sine, Square, Pulse, Ramp, DC, Noise, Sinc, Gaussian, Lorentz, Exponential Rise, Exponential
Fall, Haversine, Cardiac
Output Range 20 mVpp to 5 Vpp, HighZ;10 mVpp to 2.5 Vpp, 50 Ω
Output Resolution 1mV
Output Accuracy 2% (1 kHz)
Offset Range
±2.5 V, HighZ;±1.25 V, 50 Ω

Offset Resolution 1mV

Sine
Frequency Range 100mHz to 25MHz
Flatness ±0.5 dB
Harmonic
-40 dBc
Distortion
Stray
-40 dBc
(Non-harmonic)
Total Harmonic
1%
Distortion
S/N Ratio 40 dB
Square/Pulse
Frequency Range 100 mHz to 15MHz
Rise/Fall time <15ns
Overshoot <3%
Duty cycle Square:50%;Pulse:0.4%~99.6%
Min. Pulse Width 30 ns
Jitter 500 ps
Ramp
Frequency Range 100mHz~1MHz
Linearity 1%
Symmetry 0 to 100%
Frequency Response Analysis (MDO-2000AG only)
Dynamic Range > 80 dB (typical)
Input and Output
Channel 1 or 2
Sources
Frequency Range 20 Hz to 25 MHz
Number of Test
10 to 90 points per decade
Points

Test Amplitude 20 mVpp to 5 Vpp into High-Z ;Fixed test amplitude or custom amplitude for each decade

Test Results Logarithmic overlaid gain and phase plot

Manual
Two pairs of tracking gain and phase markers
Measurements
Plot Scaling Auto-scaled during test
Miscellaneous
Multi-language
Available
menu
operation
Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
environment
On-line help Available
Time clock Time and Date ,Provide the Date/Time for saved data
Dimensions 384mmX208mmX127.3mm
Weight 3kg