Scribd
Upload
17 views

Cyl Block

The document provides specifications for a C4.4 engine, including dimensions for the cylinder block, cylinder bore, camshaft bearings, and main bearings. It also provides installation instructions for the main bearing cap bolts.

Uploaded by

Steven Manuputty
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views

Cyl Block

The document provides specifications for a C4.4 engine, including dimensions for the cylinder block, cylinder bore, camshaft bearings, and main bearings. It also provides installation instructions for the main bearing cap bolts.

Uploaded by

Steven Manuputty
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

320 GC Excavator ZBT00001-UP (MACHINE) POWERED BY C4.4 Engine(M0092769...

Page 1 of 3

Shutdown SIS

Previous Screen

Product: EXCAVATOR
Model: 320 EXCAVATOR ZBT
Configuration: 320 GC Excavator ZBT00001-UP (MACHINE) POWERED BY C4.4 Engine

Specifications
C4.4 Engines for Caterpillar Built Machines
Media Number -UENR4523-10 Publication Date -01/06/2015 Date Updated -13/03/2018

i04135329

Cylinder Block
SMCS - 1201

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 02/10/2022
320 GC Excavator ZBT00001-UP (MACHINE) POWERED BY C4.4 Engine(M0092769... Page 2 of 3

Illustration 1 g01335800
Cylinder block

(1) Cylinder block

(2) Cylinder bore ... 105.000 to 105.025 mm (4.1338 to 4.1348 inch)

The maximum permissible wear for the cylinder bore ... 0.15 mm (0.0059 inch)

(3) Camshaft bearings

Diameter of the bushing in the cylinder block for the number 1 camshaft bearing ...
55.563 to 55.593 mm (2.1875 to 2.1887 inch)

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 02/10/2022
320 GC Excavator ZBT00001-UP (MACHINE) POWERED BY C4.4 Engine(M0092769... Page 3 of 3

Diameter of the bore in the cylinder block for the number 2 camshaft journal ...
50.546 to 50.597 mm (1.9900 to 1.9920 inch)

Diameter of the bore in the cylinder block for the number 3 camshaft journal ...
50.038 to 50.089 mm (1.9700 to 1.9720 inch)

(4) Main bearings

Bore in the cylinder block for the main bearings ... 80.416 to 80.442 mm
(3.1660 to 3.1670 inch)

Install the main bearing cap bolts (5). Refer to Disassembly and Assembly, "Crankshaft Main
Bearings - Remove and Install" or Disassembly and Assembly, "Crankshaft - Install" for the correct
procedure.

(5) Main bearing cap bolts

Evenly tighten the main bearing cap bolts. Torque for the main bearing cap bolts. ... 245 N·m
(180 lb ft)

Note: Ensure that the crankshaft can rotate freely.

Copyright 1993 - 2022 Caterpillar Inc. Sun Oct 2 23:43:05 UTC+0800 2022
All Rights Reserved.
Private Network For SIS Licensees.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 02/10/2022

You might also like