Scribd
Upload
58 views4 pages

Sel 751

The SEL-751 Feeder Protection Relay: - Provides overcurrent, over/under frequency, harmonic blocking, and breaker monitoring protection functions. - Includes a human machine interface with an LCD display and pushbuttons, as well as digital and analog inputs and outputs. - Has standard communication protocols like Modbus, DNP3, IEC 61850, and comes with acSELeratorQuickSet software for configuration.

Uploaded by

Suraj Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views4 pages

Sel 751

The SEL-751 Feeder Protection Relay: - Provides overcurrent, over/under frequency, harmonic blocking, and breaker monitoring protection functions. - Includes a human machine interface with an LCD display and pushbuttons, as well as digital and analog inputs and outputs. - Has standard communication protocols like Modbus, DNP3, IEC 61850, and comes with acSELeratorQuickSet software for configuration.

Uploaded by

Suraj Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SEL-751 Feeder

Protection
Relay

Summary
Sales Item Number 751#D2JG 

Part Number 751401DCD3D70811C10  Map

Standard Features

Protection Human Machine Interface (HMI)

Overcurrent Display
Over/Under Frequency Programmable Pushbuttons
Harmonic Blocking with Two Tri-Color LEDs
Breaker Monitoring each

Breaker Failure 8 Target Tri-Color LEDs (6


Programmable)
IEC Thermal Element
Operator Control Interface
Hardware User Configurable Labels
3-Phase AC Current Inputs EIA-232 Port (Port F)
Slot Z Multi-Language Support
Neutral AC Current Input Protocols
Slot Z IEEE C37.118
2 Digital Inputs (DI) Synchrophasors

Slot A Modbus RTU


SEL ASCII and Compressed
3 Digital Outputs (DO)
ASCII
Slot A
SEL Fast Meter, Fast
IRIG-B Time Code Input Operate, Fast SER
Slot B SEL Fast Message
Ymodem File Transfer
SEL Mirrored Bits
Communications
Event Messenger

Other
Instruction Manual CD
acSELeratorQuickSet SEL-
5030 Software
User Configurable Labels

Selected Options

Advanced Reclosing and Directional


Features 4 ACI / 3 AVI card required in Slot Z.

User Interface English

Front Panel 2x16 LCD With 4 Pushbuttons

Slot A Power 110-250 Vdc (110-240 Vac); 50/60 Hz


Supply
Voltage

Slot A Digital 110 Vdc/Vac


Input Voltage

Slot B Single 10/100BASE-T Ethernet


Ethernet (Port The protocols SNTP, IEEE 1588-2008 firmware-based
PTP and  Modbus TCP are included.
1)
Slot B No
Multimode
Fiber ST (Port
2)

Slot B Rear EIA-232


Serial Port
(Port 3)

IEC 61850 Yes


Protocol

DNP3 No
Protocol

IEC 60870-5- No
103 Protocol

EtherNet/IP No
Protocol

Slot C 4 DI / 4 DO Fast High Current Hybrid (Form A)

Slot C Digital 110 Vdc/Vac


Input Voltage

Slot D 8 DI

Slot D Digital 110 Vdc/Vac


Input Voltage

Slot E Vsync (300 Vac) / Vbat (300 Vdc) / 4 Arc-Flash Detection


Inputs
For Arc-Flash Detection Point Sensors, Bare-Fiber
Sensors, or Cable Accessories, see SEL-C804
Multimode Fiber-Optic Arc-Flash

Detection (AFD) Sensors and C814 Arc-Flash Detection


(AFD) Fiber Cables and Accessories.

In order to achieve the 2-5 ms operate times for Arc-


Flash Protection a 4 DI/4 DO Fast High

Current Hybrid Card is required.

4 ACI / 3 AVI card card required in Slot Z.

Slot E Digital NA
Input Voltage

Slot Z Voltage 3-Phase AC Voltage (300 Vac)


Inputs

Slot Z Current 1 Amp Phase, 1 Amp Neutral


Inputs
Conformal No
Coat

You might also like