Scribd
Upload
45 views

Lutron SC-942 Data Sheet

The document describes a standard 94 dB and 114 dB/1000 Hz sound calibrator used to precisely calibrate sound level meters. It has specifications including that it produces sounds at 94 dB and 114 dB at 1000 Hz ± 2% and includes accessories like a carrying case.

Uploaded by

Ibn Saany
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

Lutron SC-942 Data Sheet

The document describes a standard 94 dB and 114 dB/1000 Hz sound calibrator used to precisely calibrate sound level meters. It has specifications including that it produces sounds at 94 dB and 114 dB at 1000 Hz ± 2% and includes accessories like a carrying case.

Uploaded by

Ibn Saany
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SOUND CALIBRATOR 94 dB and 114 dB

Model : SC-942 ISO-9001, CE, IEC1010

FEATURES

* Useful tool to calibrate the


Sound Level meter precisely.
* Frequency : 1000 Hz ± 5 %.
* Sound Pressure Level :
94 dB and 114 dB.
* Suitable Microphone Type :
0.5 inch or 1 inch microphone.
* Power : 2 PCs 006P DC 9V batteres.

LUTRON ELECTRONIC
94 dB & 114 dB
SOUND CALIBRATOR
Model : SC-942
FEATURES
Standard 94 dB and 114 dB/1000 Hz sound calibrator, useful to calibrate the " Sound
Level meter " precisely.

SPECIFICATIONS
Frequency 1000 Hz ± 2 %.
Sound Pressure Level 94 dB range 94 dB ± 0.75 dB.
114 dB range 114 dB ± 0.9 dB.
Suitable Microphone Type 0.5 inch or 1 inch microphone.
Total harmonic distortion 94 dB range ± 2 %.
114 dB range ± 5 %.
Operating Temp. 0 to 50 ℃ (32 to 122 ℉).
Power Supply Heavy duty or Alkaline type, DC 9V battery. 006P,
MN1604 ( PP3 ) or equivalent, 2 PCs.
Power Consumption Approx. DC 7 mA.
Battery Check Build in " Battery test indicator "
Dimension Round 50 mm dia. x 82 mm.
Weight ( including batteries ) Approx. 350 g/0.77 LB.
Accessories Included Instruction manual............................................ 1 PC.
0.5" mic. adapter.............................................. 1 PC.
Adjust Screw Driver........................................... 1 PC.
Carrying case, CA-03......................................... 1 PC.

CALIBRATION PROCEDURES
1. Insert the microphone of " SOUND LEVEL METER " carefully all the way into
the coupler section of the SC-942.
2. Set the " Sound Level Meter " to a range suitable for measuring " 94 dB " or
" 114 dB ".
3. Set the " OFF/94 dB/114 dB " to " 94 dB " or " 114 dB " position.
A pure 1,000 Hz tone is produced.
4. Adjust the calibration VR (knob) of the " Sound Level Meter ". until that the
display reach to 94.0 dB or 114.0 dB exactly.
* Appearance and specifications listed in this brochure are subject to change without notice. 0607-SC942

You might also like