Technical data sheet

Power Belt Curve TS 1500

Function:
Conveying loads in a
system

The TRANSNORM TS1500® Power Belt Curve is used for

turning unit loads within a continous system or transport flow. Technical Advantages

Technical Data Sheet TS1500 V1.0 © Transnorm System Inc, subject to technical modification
The worldwide patented belt guidance design of the TRANS- - Positive tracking using patented belt guidance system
NORM TS1500® Power Belt Curve ensures high speed, lower with quick release
energy consumption, extremely quiet operation and reduced - No lubricant or maintenace of guide system required
maintenance. The design resolves issues related to tracking - Lowest energy consumtion - up to 50% less
inward. It also ensure that product maintains orientation - Longest warranty in industry
throughout the curve. - Quietest operation - less than 68 dBa
- Lowest preventative maintenance - up to 10% less
The TRANSNORM TS1500® Power Belt Curve also conforms - Extremely fast belt changes - in as little as 30 minutes
to TRANSNORM‘s “energy reduction principle“. All compon- - Now available with Pin-n-Go™ quick belt change
ents run in harmony with rolling components in lieu of sliding
components where practical, thus reducing wear and energy Fields of Application
usage.
- Airport baggage conveyor systems
- Sorting and distribution systems for express
The TS1500® Power Belt Curve consists of standardized
delivery and parcel services
components which are manufactured and tailored to the
- Conveyor systems for boxes and containers
customer‘s requirements. Component selection is driven
- Commissioning and shipping systems
by the lowest power consumption and the longest life. This
- Printing and bindery systems
results in a very efficient, highly reliable, low cost of ownership
power belt curve. The design allow of quick changing of belts
on assembled installations. Key Performance Data
- Conveyor speed: max. 600 fpm (CL)
The TS1500® Power Belt Curve can convey unit loads
horizontally or on an inclined or declined track. Various radii, - Weight load: 40 lbs/ft
widths, angles, heights, speeds and belting materials are - Conveyor angle: 15°-180°
available to meet your specific application.
Power Belt Curves TS 1500

Specifications Technical Data

QF Load capacity, max. (lbs/ft) 40 N Nominal width (inch) 10“ - 61.5“
vF Conveyor speed, max. (CL) (fpm) 600 wN Nominal angle (°) 30-180

OR Outside Radius
Accessories TS1500/100 (inch) 27“ - 59“
- Sideguards - 12ga. Various heights, pre-punched for mating
TS1500/140 (inch) 59“ - 156“
- Floor Supports - virtually all heights available
HF Conveyor height, min
- Drive packages - Shaft Mount, Underhung
TS1500/100 (inch) 8.75“
- Underguards - Plastic mesh, solid steel, expanded metal

- Belting - multiple types, application specific TS1500/140 (inch) 9.50“

DT Pulley diameter (at OR)

TS1500/100 (mm) 100

TS1500/140 (mm) 140

Main Dimensions

TRANSNORM SYSTEM Inc.

2810 Ave E East
Arlington, TX 76011
Tel.: (800) 331-1749
Fax: (972) 606-0768
e-Mail: [email protected]
www.transnorm.com