Scribd
Upload
31 views

Report CSI Col.

This document provides information about a column design project including: - Basic design parameters for the column such as concrete strength, rebar properties, and section dimensions - Load combinations resulting in a maximum axial load of 70 tons and moments of 20 and 17.5 ton-m - Calculation of moment magnification factors along the x and y axes - Summary that the column design satisfies capacity requirements under the given load combinations.

Uploaded by

MAB Ali
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

Report CSI Col.

This document provides information about a column design project including: - Basic design parameters for the column such as concrete strength, rebar properties, and section dimensions - Load combinations resulting in a maximum axial load of 70 tons and moments of 20 and 17.5 ton-m - Calculation of moment magnification factors along the x and y axes - Summary that the column design satisfies capacity requirements under the given load combinations.

Uploaded by

MAB Ali
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Project Information

Project
Job No
Company
Designer
Remarks

Software CSICOL (Version: 8.0 (Rev. 0))


File Name D:\SAP 2000 v.14 \Column1

Working Units Metric (mm, Ton, Ton-m, Ton/m^2)


Design Code ACI-318-02

Column:Column1

Basic Design Parameters

Caption = Column1
Default Concrete Strength, Fc = 3000 ton/m^2
Default Concrete Modulus, Ec = 2600000 ton/m^2
Maximum Concrete Strain = 0.003 in/in

Rebar Set = ASTM


Default Rebar Yeild Strength, Fy = 40000 ton/m^2
Default Rebar Modulus, Es = 20000000 ton/m^2
Default Cover to Rebars = 0.025 m
Maximum Steel Strain = Infinity

Transverse Rebar Type = Ties

Total Shapes in Section =1


Consider Slenderness = No

D:\SAP 2000 v.14\Column1.CDB Page 1


Section Diagram

Cross-section Shapes

Shape Width Height Conc Fc S/S Curve Rebars


m m ton/m^2
Rectangular 0.400 0.400 3000.000 ACI-Whitney Rectangular 8-#14
Shape

Rebar Properties

Sr.No Designation Area Cord-X Cord-Y Fy S/S Curve


m^2 m m ton/m^2
1 #14 0.0015 0.025 0.025 40000 Elasto-Plastic
2 #14 0.0015 0.025 0.375 40000 Elasto-Plastic
3 #14 0.0015 0.375 0.375 40000 Elasto-Plastic
4 #14 0.0015 0.375 0.025 40000 Elasto-Plastic
5 #14 0.0015 0.025 0.200 40000 Elasto-Plastic
6 #14 0.0015 0.200 0.375 40000 Elasto-Plastic
7 #14 0.0015 0.375 0.200 40000 Elasto-Plastic
8 #14 0.0015 0.200 0.025 40000 Elasto-Plastic

8-#14
Total Area = 0.0116 m^2
Steel Ratio = 7.26 %

Basic Section Properties:

Total Width = 0.400 m


Total Height = 0.400 m
Center, Xo = 0.000 m

D:\SAP 2000 v.14\Column1.CDB Page 2


Center, Yo = 0.000 m

X-bar (Right) = 0.200 m


X-bar (Left) = 0.200 m
Y-bar (Top) = 0.200 m
Y-bar (Bot) = 0.200 m

Area, A = 0.160 m^2


Inertia, Ixx = 0.00213 m^4
Inertia, Iyy = 0.00213 m^4
Inertia, Ixy = 0.000 m^4

Radius, rx = 0.11547 m
Radius, ry = 0.11547 m

Additional Section Properties:

Modulus, S3(Top) = 0.01067 m^3


Modulus, S3(Bot) = 0.01067 m^3
Modulus, S2(Left) = 0.01067 m^3
Modulus, S2(Right) = 0.01067 m^3

Plastic Modulus, Z3 = 0.02731 m^3


Plastic Modulus, Z2 = 0.01821 m^3
Torsional, J = 0.0037 m^4
Shear Area, A3 = 0.14139 m^2
Shear Area, A2 = 0.14309 m^2

Principal Angle = 0.00E+00 Deg


Inertia, I33' = 0.00213 m^4
Inertia, I22' = 0.00213 m^4

Framing Along-X

Total C/C Length, Lc = 3.648 m


Unsupported Length, Lu = 3.040 m
Framing Type =4
Framing Case =0
K Factor, Braced = 1.00
Kl/r, Braced = 26.33
K Factor, Unbraced = 1.00
Kl/r, Unbraced = 26.33

Framing Along-Y

Total C/C Length, Lc = 3.648 m


Unsupported Length, Lu = 3.040 m
Framing Type =4
Framing Case =0
K Factor, Braced = 1.00
Kl/r, Braced = 26.33
K Factor, Unbraced = 1.00
Kl/r, Unbraced = 26.33

Simple Loads

D:\SAP 2000 v.14\Column1.CDB Page 3


Final Design Loads

Sr.No Combination Pu Mux-Bot Muy-Bot Mux-Top Muy-Top


ton ton-m ton-m ton-m ton-m
1 Combination1 70.00 20.00 17.50 14.75 13.65

Result Summary

Sr.No Combination Pu (ton) Cap. Ratio-Bot Cap. Ratio- Remarks


Top
1 Combination1 70.00 0.636 0.485 Capacity OK

Moment Magnification Calculations

Combination1- Along X

Bracing Condition = Non-Sway

Non-Sway Part of Loading:


Design Load, Pu = 0.00 ton
Sustained Load, Pud = 0.00 ton
End Moment, M1 = 0.00 ton-m
End Moment, M2 = 0.00 ton-m
Minimum Moment, Mmin = 0.00 ton-m
Design Moment, Mc = 0.00 ton-m

Creep Factor, Bd = 0.00


Section Stiffness, EI For Pcr = 0.00E+00 ton-m^2
Euler Buckling Load, Pcr = 0.00 ton
Moment Factor, Cm = 0.00
Non-Sway Moment Magnifier = 1.00
Magnified Moment, Mc = 20.00 ton-m

Combination1- Along Y

Bracing Condition = Non-Sway

Non-Sway Part of Loading:


Design Load, Pu = 0.00 ton
Sustained Load, Pud = 0.00 ton
End Moment, M1 = 0.00 ton-m
End Moment, M2 = 0.00 ton-m
Minimum Moment, Mmin = 0.00 ton-m
Design Moment, Mc = 0.00 ton-m

Creep Factor, Bd = 0.00


Section Stiffness, EI For Pcr = 0.00E+00 ton-m^2
Euler Buckling Load, Pcr = 0.00 ton
Moment Factor, Cm = 0.00
Non-Sway Moment Magnifier = 1.00
Magnified Moment, Mc = 17.50 ton-m

D:\SAP 2000 v.14\Column1.CDB Page 4


D:\SAP 2000 v.14\Column1.CDB Page 5

You might also like