Lm-therm Elektrotechnik AG
Sulzbachstraße 15 - 94501 Aldersbach
T +49 (0) 85 43 - 6 24 60 30
E
[email protected] ELECTRIC CABINET HEATER
WITH INTEGRATED THERMOSTAT
ceramic heating elements
low surface temperature
plug`n`play no need of an external controller
MAXI
Type: Maxi
Power range: 130W – 180W
Voltage range: 24V – 440V
Technical data
DESCRIPTION ORDER INDEX
Kind of protection IP30 / IP20 with DK / special version IP54 IP30 or IP20 or IP54
Protection class PC I -
Operation- / storage temperature -40 – +70 °C -
Surface temperature (at 20°C surrounding temperature) according to temperature setting (see switch-off temperature) -
Wiring cable 0,50m 3x0,75mm² * exact specification
Heating element ceramic heating elements -
Mounting snap-mounting for 35mm DIN-rail SPS
screw-mounting (horizontal or vertical) SRS or SRW
Connection wiring cable 3x0,75 mm² AL
plug-in terminal 0,08 - 2,5mm² DK
Temperature settings (intrinsic temperature) standard: < 25°C On / 60°C Off ST
tropic: < 35°C On / 70°C Off T
high tropic: < 50°C On / 80°C Off HT
anti-freeze: < 10°C On / 60°C Off F
Mounting position vertical -
Special voltages 24V AC or DC, 48V AC or DC, 115V, 400V, 440V exact specification
UL-license UL-File: E-317613 UL
* variable length is possible
Dimension Wiring diagram
Standard versions
ORDER-NO. VOLTAGE POWER OPERA.CURRENT INRUSH CURRENT WEIGHT DIMENSIONS CONNECTION MOUNTING TEMPERATURE SETTING
230130AL0 230V / 50/60Hz 130W 0,56A 0,56A 800g 152,9x88x79mm cable 0,50m snap <25°C On / 60°C Off
230150AL0 230V / 50/60Hz 150W 0,65A 0,65A 800g 152,9x88x79mm cable 0,50m snap <25°C On / 60°C Off
230180AL0 230V / 50/60Hz 180W 0,78A 0,78A 800g 152,9x88x79mm cable 0,50m snap <25°C On / 60°C Off
The information described on this data sheet contains descriptions or characteristics, which could not apply in the The mentioned technical data have been determined under labor conditions by universal test instructions. Only
described way in the concrete case. The information of the products can also change in the course of development. insofar characteristics are ensured. The test for the suitability for the intended use scheduled by the purchaser is
The desired characteristics are only binding in the case that they have been explicitly agreed with a contract incumbent on the purchaser; we do not take warranty for that. Errors reserved. Status: 07/2020
conclusion. Delivery possibilities and technical changes reserved.
HEATING