Scribd
Upload
17 views

Sta2051 DB

This document provides a data brief for the STA2051, a 32-bit single chip baseband controller for GPS and telematic applications. The STA2051 includes an ARM7TDMI CPU, 256KB of flash memory, 64KB of RAM, a 12-channel GPS correlation DSP, CAN and serial communication interfaces, analog to digital converters, and general purpose I/O. It is available in 144-pin TQFP and 64-pin TQFP packages and operates from 2.7V to 3.6V with a temperature range of -40°C to 85°C.

Uploaded by

Funnypoum
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
17 views

Sta2051 DB

This document provides a data brief for the STA2051, a 32-bit single chip baseband controller for GPS and telematic applications. The STA2051 includes an ARM7TDMI CPU, 256KB of flash memory, 64KB of RAM, a 12-channel GPS correlation DSP, CAN and serial communication interfaces, analog to digital converters, and general purpose I/O. It is available in 144-pin TQFP and 64-pin TQFP packages and operates from 2.7V to 3.6V with a temperature range of -40°C to 85°C.

Uploaded by

Funnypoum
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

STA2051

VESPUCCI
32-BIT SINGLE CHIP BASEBAND CONTROLLER
FOR GPS AND TELEMATIC APPLICATIONS
DATA BRIEF

1 FEATURES Figure 1. Packages


■ ARM7TDMI 16/32 bit RISC CPU based host
microcontroller.
■ Complete Embedded Memory System:
– FLASH 256K bytes + 16K bytes (100K eras- TQFP64 TQFP144
ing/programming cycles)
– RAM 64K bytes. Table 1. Order Codes
■ External memory interface provides glueless
support for up to four banks of external SRAM, Part Number Package
FLASH, ROM. STA2051 TQFP64
■ 12 channel GPS correlation DSP: – no TCXO STA2051E TQFP144
required
– RTCA-SC159 / WAAS / EGNOS support
■ 16-bit Watchdog Timer with 8 bits prescaler for
■ GPS performance
system reliability and integrity.
– accuracy: stand alone <30m; differential
■ CAN module compliant with the CAN
<1m; surveying <1cm
specification V2.0 part B (active). The bit rate
– time to first fix: autonomous start 90s; cold can be programmed up to 1 MBaud.
start 45s; warm start 7s; obscuration 1s.
■ Four16-bit programmable Timers with 7 bit
■ CMOS M8T (0.18 um) technology. prescaler, up to two input capture/output
■ -40°C to 85°C operating temperature range. compare, one pulse counter function, one PWM
■ 144-pin TQFP144 package or 64-pin TQFP64 channel with selectable frequency each.
package ■ 4 channels 12-bit sigma-delta Analog to Digital
■ Power Supply: Converter, single channel or multi channel
– 2.7V to 3.6V operating supply range for Input/ conversion modes, single-shotor continuous
Output periphery conversion modes, sample rate1KHz (4 KHz
– 3 V to 3.6V operating supply range for A/ D when single channel), conversion range 0-2.5V.
Converter reference ■ Three Serial Communication Interfaces (UART)
– 1.8V operating supply range for core supply allow full duplex, asynchronous,
provided either by internal Voltage Regulator communications with external devices,
with external stabilization capacitor, or by ex- independently programmable TX and RX baud
ternal supply for higher power efficiency. rates up to 625K baud.
■ 0-66MHz internal clock frequency managed by ■ One UART adapted to suit Smart Card interface
a Reset and Clock Control Unit; the unitisable to needs, for asynchronous SC as defined by ISO
provide low power modes (WAIT, SLOW, 7816-3; it includes SC clock generation.
STOP, STANDBY) and to generate the internal ■ Two Serial Peripheral Interfaces (SPI) allow full
clock from the external reference through duplex, synchronous communications with
integrated PLL. external devices, master or slave operation,
■ 48 programmable General Purpose I/O, each max baud rate: 8Mb/s. One SPI may be used as
pin programmable independently as digital input Multimedia Card interface.
or digital output; 40 (30 in TQFP64) are ■ Two I2C Interfaces provide multi-master and
multiplexed with peripheral functions; 16 can slave functions, support normal and fast I2C
generate an interrupt on input level/transition. mode (400KHz), 7/10 bit addressing modes.
■ Real time clock module with 3 2 KHz low power
One I2C Interface is multiplexed with one SPI,
oscillator and separate power supply to
continue running during stand-by mode. so either 2xSPI+1xI2C or 1xSPI+2xI2C may be

Rev. 1
September 2004 1/5

This is preliminary information on a new product now in development. Details are subject to change without notice.
STA2051 - VESPUCCI

used at a time.
■ USB unit V1.1 compliant, software configurable end point setting, USB Suspend/Resume support.
(TQFP144 only)
■ High Level Data Link Controller (HDLC) unit supports full duplex operating mode, NRZ, NRZI, FM0 and
MANCHESTER modes, internal 8bit Baud Rate Generator.

Figure 2. System Block Diagram

2/5
STA2051 - VESPUCCI

Figure 3. TQFP144 Pins Connection Diagram (Top view)

3/5
STA2051 - VESPUCCI

Figure 4. TQFP64 Pins Connection Diagram (Top view)

Table 2. Revision History


Date Revision Description of Changes

September 2004 1 First Issue

4/5
STA2051 - VESPUCCI

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.

The ST logo is a registered trademark of STMicroelectronics.


All other names are the property of their respective owners

© 2004 STMicroelectronics - All rights reserved

STMicroelectronics group of companies


Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com

5/5
This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.

You might also like