The current issue and full text archive of this journal is available at

www.emeraldinsight.com/0969-9988.htm

Mobile
Using mobile computing for computing
construction site information
management
7
Yuan Chen and John M. Kamara
School of Architecture, Planning and Landscape, Newcastle University, Received March 2007
Newcastle upon Tyne, UK Revised July 2007
Accepted July 2007

Abstract
Purpose – The purpose of this paper is to develop a model for the use of mobile computing in the
management of on-site construction information and communication.
Design/methodology/approach – The research strategy contains three steps: a pilot study for the
first stage, a survey that investigated the information needs of particular users and the nature of
on-site information, and finally the development of a model and the validation and evaluation by
operational scenarios.
Findings – The developed model explores how mobile computing can be used on construction sites
to manage on-site information. This model, firstly, identifies the key factors of mobile computer,
wireless network, mobile application, construction personnel, construction information, and
construction site; secondly it describes the relationships and interactions among these factors.
Based on the model, the selection process for mobile computing strategy includes the clarification of
information management process, the creations of overview for mobile computing solution, the
identification of mobile computing strategy, and the selection of appropriate mobile computing
technology.
Originality/value – The developed model explores the general concepts and the internal
relationships at the two areas of mobile computing and construction site information management.
The application of the model can help users to select mobile computing strategies for managing on-site
construction information based on the characteristics of their projects.
Keywords Construction industry, Information management, Mobile communication systems
Paper type Research paper

Introduction
Construction information management has greatly benefited from the advances in
information and communication technology (ICT) in increasing the speed of
information flow, enhancing the efficiency and effectiveness of information
communication, and reducing the cost of information transfer. Current ICT support
has been extended to construction site offices. However, construction projects typically
take place in the field where construction personnel have difficulty in gaining access to
conventional information systems for their information requirements. The advances in
affordable mobile devices, increases in wireless network transfer speeds and Engineering, Construction and
improvements in mobile application performance, give mobile computing technology a Architectural Management
Vol. 15 No. 1, 2008
powerful potential to enhance on-site construction information management. However, pp. 7-20
before employing this new technology, it is necessary to identify the features of mobile q Emerald Group Publishing Limited
0969-9988
computing, construction personnel, construction information and construction site, and DOI 10.1108/09699980810842034
ECAM explore the interactions that are likely to affect the implementation of mobile
15,1 computing in on-site information management.
This paper presents a research project which considers how mobile computing
technology can be best employed in managing on-site construction information.
On-site information management and the application of mobile computing in
construction are described. Following a description of the research carried out, the
8 model is introduced with detailed explanations on its nature and practical application.
An illustrative example of how the model can be used in the selection of mobile
computing technologies is presented. The paper concludes with a brief discussion on
the potential benefits and limitations of the proposed model.

Construction site information

Construction sites are information intensive environments where actual construction
processes and activities are carried out. Various construction personnel in the field
need large amounts of information ranging from project design drawings to personal
diaries to support their ongoing works and to make decisions about the process of
construction. In order to explore and develop effective methods for on-site information
management, the starting point should be the identification and categorization of
on-site construction information.
Several researchers have investigated on-site construction information from various
perspectives. In de la Garza and Howitt’s (1998) research, on-site construction
information was grouped into ten major categories from a generic construction project
perspective. These ten categories include:
(1) requests for information;
(2) materials management;
(3) equipment management;
(4) cost management;
(5) schedule and means and methods;
(6) jobsite record keeping;
(7) submittals;
(8) safety;
(9) QC/QA; and
(10) future trends.

Each category was further divided into more detailed subcategories. For example, the
group of materials management contains the following five subcategories:
(1) access to material management;
(2) material location;
(3) material order status;
(4) request materials to site; and
(5) place material orders.
From a site record perspective, Scott and Assadi (1999) have summarized three types of Mobile
site records, which consist of a range of information relating to finance, quality and computing
progress. Especially, the progress records typically kept by contractors and
supervisors aim to identify the works carried out during the project life-cycle and
consist of site diaries, weekly progress reports, day-work sheets and joint records,
photographs, as-built programmes/schedules, and minutes of progress meetings.
In earlier research, Tenah (1986) explored the information needs from a user’s 9
perspective and stated that the information needs of each members of the project team
are inextricably linked to their management responsibilities. Construction personnel
are divided into five levels, each of which has different management responsibilities
and information needs. For example, at the functional management level, the foreman’s
information needs consist of drawings, specifications, contract documents, local union
activities, safety regulations labour agreements, quality control, progress and field
performance reports.
Due to the complex nature of the construction process and the dynamic nature of
construction sites, the management of on-site information usually inefficient and leads
to low productivity. The most effective way for construction personnel to manage
information on sites is to retrieve or capture information at the point where they are
and at the time when they need it. However, this ideal situation has been difficult or
impossible with traditional information management methods, which are normally the
organization and maintenance of paper-based documents. Bowden et al. (2004)
indicated that the main type of information that onsite construction personnel receive
and transmit is paper-based, which poses a major constraint for site information
communication and exchange. Ineffective on-site information management can result
in personnel overlooking important issues that require quick response and often cause
on-site decisions to be deferred (Singhvi and Terk, 2003).
The development of information technology (IT) gives the construction industry a
powerful potential to increase the efficiency and effectiveness of information exchange,
but current IT support has only extended to construction site offices and they are still
gaps between site offices and actual work sites. The emergence of mobile computing
(MC) has the potential to enlarge the boundary of information systems from site offices
to actual work sites and ensure real time data flow to and from the construction sites.

Mobile computing and construction information management

The concept of mobile computing (MC) has been considered to consist of three major
components: computers, networks and mobile applications (Rebolj and Menzel, 2004).
Computers which can be used indoors and outdoors by users include tablet PCs, all
kinds of pocket computers, palmtops and wearable computers, but exclude
conventional notebooks. Networks which can support the connection and
communication of mobile computers with sufficient bandwidth include all types of
wireless networks such as wireless wide area networks (WWAN), wireless local area
networks (WLAN), wireless personal area networks (WPAN), and satellite networks.
Mobile applications with the attributes of context-sensitivity and personalization can
support mobile users’ work processes and enable them to work together collaboratively
and cooperatively in a mobile computing environment.
With the consideration of the characteristics of construction sites and construction
processes, one major question should be carefully considered: what are the necessary
ECAM requirements for applying mobile computing in construction information
15,1 management? After interviews and discussions with construction managers, Kimoto
et al. (2005) identified nine necessary requirements for mobile computing, which are
mobility of hardware, durability of hardware, compatibility of hardware and operating
system (OS), compatibility of data between the mobile devices and PC, expressivity of
display, stability of system, operability of user interface, processing speed, and
10 continuous computing environment.
With advances in information technology and the decreasing price of computer
hardware, current commercially available mobile devices, wireless networks and
mobile applications can fulfil the above necessary requirements. The current status of
Mobile IT have been discussed in the report of the COMIT project, which briefly
describes the mobile devices, networks and computer applications currently in use in
the construction industry (COMIT, 2003). In the three components of mobile computing
concept, mobile application is the key factor that responds to specific characteristics of
mobile devices and wireless networks and support users’ work process by enhancing
the efficiency of information communication. Based on commercially available
products and related research, mobile applications can be grouped into the following
three categories:
(1) Mobile CAD applications. Construction personnel using mobile devices
equipped with mobile CAD applications can view, mark-up, create, edit and
collaborate on 2D/3D AutoCAD compatible designs and digital blueprints
anywhere and at anytime when they are on construction work sites. Users of
mobile CAD applications may contact anyone who needs the support of
drawings and designs in the construction field, such as engineers, project
managers, designers and drafters. Most mobile CAD applications are
compatible with popular mobile devices running Windows CE, Windows
mobile or palm operating systems. In order to communicate drawing files with
desktop PCs, mobile CAD applications can connect and exchange data with PCs
by using ActiveSync for Windows OS or HotSync for Palm OS. Example
applications include PocketCAD, PowerCAD and ZipCAD.
(2) Data capture applications. There are three types of data capture applications
used in the field, which include data capture, bar code scanning and wireless
sensor network. SHERPA (Ward et al., 2003) is one of the mobile data capture
systems, which enables users to utilize workforce driven mobile computers to
collect real time piling work data in the field through a wireless local area
network (WLAN). A bar-code-enabled PDA application, named the Mobile
Construction Supply Chain Management system (M-ConSCM), has been
developed to improve the effectiveness and convenience of information flow in a
construction supply chain environment through integrating a PDA and bar
code scanner together (Tserng and Dzeng, 2005). Wireless sensor network that
consists of various devices capable of a cooperative sensing task is a new
innovative technology similar to the concept of ubiquitous computing. A mass
concrete curing management system (CMS) has been developed to investigate
the possibility of applying wireless sensor network to on-site data collection
processes (Lee and Kang, 2006). This system can allow the collection, transfer,
and delivery of the recorded curing temperature data automatically in real time
in a wireless sensor network environment.
 (3) Project management applications. Applications in the project administration Mobile
area provide users with the capabilities of project and programme management computing
such as construction activity review, activity monitoring and updating,
progress management, risk management, Microsoft Project file view and
update, and material and equipment management, through their on-hand
mobile computers. Available commercial applications include Primavera
Mobile Management, CYtools, and OnSite FDM. 11
Research methodology
According to current developments in mobile computing technology and the status of
on-site construction information management, the potential opportunities of mobile
computing are best deployed in the area of on-site information communication. In this
research, a construction site is considered to comprise two components: the
construction “work site” and the “site office”. The work site includes all areas outside
the site office, and the site office is the headquarters for project (site) personnel.
Construction personnel in this research refer to those managerial people whose work
places are mainly based on construction sites. The aim of this research is to identify
opportunities for applying mobile computing in construction site information
management and to develop a model that explores how mobile computing technology
can be used in construction site environments to retrieve and transfer on-site
information. This proposed model will identify all major factors and their associations,
which affect the design, implementation, and maintenance of mobile computing in
on-site information communication. In order to validate and evaluate this model,
various operational scenarios were developed to demonstrate how mobile computing
can be used to retrieve and transfer information on particular construction site, and
how mobile computing can enhance the effectiveness of the construction process for
particular users.
In order to achieve the objectives of this research, an appropriately designed
methodology was necessary. The research strategy contains three steps: a pilot study
for the first stage, a survey that investigated the information needs of particular users
and the nature of on-site information, and finally the development of a model and the
validation and evaluation by operational scenarios.
After the reviews and evaluations of previous research and published literature, a
conceptual model was developed from the perspective of information management
(Chen and Kamara, 2005a). This conceptual model integrates mobile computing
technology with each level of information management, and explains the relationships
between each of them.
After setting up the conceptual model, a case study was conducted in February 2005
(Chen and Kamara, 2005b). It involved visits to three construction sites with varying
project types and interviews with various construction personnel. Findings from this
case study identified the varieties of roles on construction sites, the main information
they need to support their construction activities, and current IT support.
A web-based survey was conducted to investigate the information needs of
particular users, the nature of on-site information, and the mechanisms of retrieving
and transferring information on construction sites (Chen and Kamara, 2006). The
survey was conducted via the internet, first as a pilot survey and then a final survey.
The results of the pilot survey were excluded from the final analysis since it was
ECAM corrected and improved for format and content problems in the structured
15,1 questionnaires.
Findings from literature review, case study and the survey were used as the
evidence to set up the final model. The analysis and generalisation of features of
commercially available mobile computing products provided the identification of
sub-factor for the primary factors of “mobile computer”, “wireless network”, and
12 “mobile application”. The visit to construction sites and the interviews with
construction personnel presented the general environment and circumstance of
“construction site” that is one primary independent factor in the model. The survey
coupled with the case study identified the sub-factors, such as “user’s role”, “user’s
mobility”, “information type”, “information format”, “file size”, and “information flow”,
for the two primary factors of “user” and “construction information”. The concept
model as the results of literature review indicated the link between the user and the
mobile computer, which is the issue of human computer interaction (HCI) presented in
the final model. The information requirements of different construction personnel
provided the evidence of what types of construction information mobile computing
have to deal with and the concern of how mobile computing can meet user’s
information needs. The nature of on-site information investigated in the survey raised
the consideration of how mobile computers coupled with mobile applications can input
and output construction information and whether wireless network has the capability
to transfer them at a satisfactory speed. The mechanism of construction site
information management indicated the information sources from which users retrieve
information and the information destinations to which users transfer information by
applying mobile computing technologies. The directions of information flow require
mobile computers and mobile applications to have relative connection method and data
transfer methods. In general, findings from literature review, case study and the survey
provided the identification of primary factors and sub-factors, and the exploration of
interrelationships between these factors.

Model of mobile computing in on-site construction information

management
The third stage of this research was to establish the model that explores how mobile
computing can be used on construction sites to manage on-site information. This
model, firstly, identifies the key factors of mobile computing, construction personnel,
and construction information and construction site; second, it describes the
relationships and interactions among these factors. The intention is to use the model
to provide guidance in the effective deployment and selection of mobile computing for
on-site information management.
The top-level model, shown in Figure 1, consists of six primary factors: three
independent factors and three dependent factors. The three dependent factors, which
are “mobile computer”, “wireless network” and “mobile application”, are the
fundamental components of the concept of mobile computing. The three
independent factors – “users”, “construction information” and “construction site” –
are the elements that determine the use of mobile computing in a particular context.
The independent factors indicate the specific construction environment at which
mobile computing will be implemented to manage information, and determine the
design of mobile computing systems. Therefore, the three components of mobile
 Mobile
computing

13

Figure 1.
The framework of using
mobile computing in
on-site information
management

computing are the dependent factors that the consideration of implementation should
depend on the various construction circumstances decided by independent factors.
In order to explore the interrelationships between independent and dependent
factors in great depth, the primary factors have been further divided into sub-factors
and the top-level model is therefore decomposed into various sub-models, each of
which represents the detailed relationship between two primary factors. Figure 2
shows the sub-model that contains sub-factors of primary factors including
“construction information”, “mobile computer”, “mobile application”, and “wireless
network”. As an example, the independent factor “construction information” is divided
into seven sub-factors: information type, information format, file size, information flow,
information processing, information source, and information destination. As the
dependent factor, “mobile computer” contains the following sub-factors: operating

Figure 2.
Interrelationships between
construction information
and mobile computing
ECAM system, processor speed, storage capacity, data input, data output, physical feature,
15,1 battery duration, and connection method.
Construction information referring to the on-site information that users retrieve to
or transfer from construction sites have its own characteristics compared with other
information types. The use of mobile computing systems in managing construction
information should address these specific features. The sub-model in Figure 2 also
14 shows the interrelationships between construction information and mobile computing
and is discussed as follows:
.
Construction information and mobile computer. The link between construction
information and mobile computer concentrates on how mobile computer presents
and provides specific construction information to users. One of the features of
construction information is that it is represented in various formats including
graphic, imagine, text, form and verbal. The format of construction information
has a major impact on the output method of the mobile computer; similarly the
output mechanism of the mobile computer can restrict the output format of
construction information. For example, when a user needs the mobile computer
to display construction drawings, the screen size of mobile computer limits the
expressional scope of drawings. The requirement of displaying large size
drawings can be fulfilled from the hardware aspect by choosing a mobile
computer with larger size screen. In addition, the input methods of mobile
computer including keyboard, touch-screen input and voice recognition input,
determine what types of information format can be inputted and how efficiently
this can be done. The storage capability of the mobile device should be able to
store the necessary information files; on the other hand, the file size for mobile
application software should be smaller and only keep necessary software
functions in order to fit in the limited storage capability.
.
Construction information and mobile application. Information format also has
influence on the software perspective of data input or output. For example, the
requirement of displaying large size drawings can be fulfilled from the software
aspect through the design of drawing viewer software with the functions of zoom
out, zoom in, scrolling, mobbing and layout. Functions of mobile application
should fulfil the requirements of information processing performed by user on
construction work sites. Users’ information processing activities include viewing
drawings, editing files, making notes, and taking pictures or videos, which
should be carefully concerned when selecting appropriate mobile application
software. The information flow of construction information refers to whether
information is retrieved from other construction employees to construction work
sites or is transferred from construction work site to other project information
system or employee. Data transfer methods of mobile application should meet
the requirements of information flow with the consideration of efficiency,
effectiveness and convenience.
.
Construction information and wireless network. The selection of wireless
networks for construction information transfer should concern the file size of
information that need to transfer and whether the network’s data rate or
bandwidth have the ability to transfer information reliably and without delay.
Other factors that affect the selection of technological standard for wireless
 network are the information retrieval source and the information transfer Mobile
destination. If information source is the computer system in site office, wireless computing
local area network that covers the whole construction site is enough for user to
retrieve information by using mobile computer. If information source is
construction personnel, user can simply use Smart Phone or Pocket PC Phone to
make a phone call via the cell phone network or IP phone network.
15
The above discussion explored the interrelationships between construction
information and mobile computing. The whole model investigates all links between
independent factors and dependent factors. Primary factors are divided into
sub-factors and the top-level model is also broken down into different sub-models
that represent specific relationships.

Application of model for selecting mobile computing strategy

One of the applications for the developed model is to select mobile computing strategy
for managing on-site construction information. The overall selection process includes
four major stages: the clarification of information management process, the creations of
overview for mobile computing solution, the identification of mobile computing
strategy, and the selection of appropriate mobile computing technology.

The clarification of information management process

The aim of the first stage is to clarify and map out the selected information
management process that could derive benefits from the implementation of mobile
computing. In this stage, the relevant construction process will be analysed, the
characteristics of construction information will be identified, and the information
management process will be developed and recorded. The output of this stage is the
process maps that clarifies and reflects the procedure of information management for
select construction process. There are many useful techniques and tools that can assist
the designer to analyse and map out the information management process. The process
and techniques that can be used to map out processes are:
(1) Define process:
.
define process boundaries,
.
determine process aims and roles,
.
identify its relationship to involved users;
(2) Analyse “as is” process:
. background reading,
.
interviewing,
.
questionnaire,
.
observation,
.
document sampling;
(3) High level analysis:
.
rich picture,
.
“use case” diagram,
.
“collaboration” diagram;
ECAM (4) Process map:
15,1 .
UML,
.
scheduling methods,
.
data flow diagram,
.
IDEF0,
16 .
Petri nets.

The creations of overview for mobile computing solution

In the second stage, areas that can be improved by proposing mobile computing on the
process map will be highlighted and the desired position on each highlighted area will
be identified with regard to the use of mobile computing.
Areas that can be improved by implementing mobile computing technologies such
as PDAS, Tablet PCs, bar-coding, wireless sensors, GPRS/GSM/3G, wireless LAN, and
Mobile Application Software, can be identified by taking account of the following
guides:
. Information management activities where information is retrieved to
construction work sites by paper.
.
Information management activities where information is processed on paper
such as view, amend, edit, check, update, collect, and record.
.
Information management activities where information is transferred from
construction work sites by paper.
. Information management activities that could be fully automated if electronic
data is available.
.
Information management activities involving the communication with other
personnel using traditional methods (e.g. by telephone, fax, or post).
.
Information management activities involving the information exchange from
person to person, person to information system, person to document storage
place, work site to site office, site office to headquarter, which can be replaced by
mobile computing.

After highlighting the areas where the implementation of mobile computing can
improve the efficiency and effectiveness of information management, the modified
process map can show how the original process can be re-engineered by applying
mobile computing. The output of this stage is the modified process map that reflects
the changes where mobile computing is introduced to assist users to manage
construction information.

The identification of mobile computing strategy

The third stage aims to assist the user to select an appropriate mobile computing
strategy that can re-engineer the information management process from the current
situation to the desired position. Figure 3 is an example of a process that identifies the
current situation, the desired position and the different mobile computing strategies,
and indicates the different ways that information management process can be
re-engineered from current situation to desired position.
 Mobile
computing

17

Figure 3.
The mobile computing
strategy matrices

In Figure 3, the current situations of on-site information management are paper-based

information communication, non-automatic information management activities, and
traditional information communication methods including post, fax, and telephone. In
order to improve the efficiency of on-site information management, the desired
objectives contain the implementation of digital information communication,
automatic information management activities, and the use of mobile computing for
on-site information communication. For the achievement of desired objectives, the
three mobile computing strategies represent different extents of implementing mobile
computing to manage information on sites. The first strategy uses commercially
available mobile application software and mobile computers, and synchronises data
between mobile computers and site-office-based computers via wired connections (USB
or Ethernet) or short range wireless connections (Bluetooth or IrDA). Compared with
the first one, the second strategy provides the coverage of wireless networks (WLAN or
WWAN) on construction work sites. The third strategy indicates the design of the
whole mobile computing system with respect to the particular construction situation
and users’ requirements. This strategy includes the design of specific software, the
selection of appropriate mobile computers, and the establishment of wireless networks.
Additionally, in response to the features of different information management
processes and various construction situations, Figure 3 can be modified by adding or
reducing the mobile computing strategies based on the user’s own circumstances. As a
result of selecting the specific strategy, the desired information management process
will be revised to reflect the selected mobile computing strategy.

The selection of appropriate mobile computing technology

The final stage focuses on the selection of appropriate mobile computing technologies
for the specific mobile computing strategy selected in the third stage. For each mobile
computing strategy identified in the last stage, the appropriate mobile computing
ECAM technologies including mobile computer, wireless network and mobile application
software, will be selected based on the developed model of mobile computing in on-site
15,1 construction information management. Restrictions and interrelationships that may
facilitate or inhibit the implementation of mobile computing in managing on-site
construction information will be also identified. This can enable the organisation to
develop specific plans to implement the selected mobile computing technology that
18 relates to their mobile computing strategy.
Figure 4 is the example of how mobile computing technologies can be selected
according to the developed model. In order to maintain the coherence with the
discussed sub-model in previous sections, this figure only concerns one independent
factor “construction information” (Figure 1) and represents how construction
information can affect the selection of mobile computing technologies. Moreover, the
use of the model should concern all three independent factors and their influence on the
technology selected.

Further work
In the final stage of the research, the developed model will be evaluated and validated
in order to compare to realisations of the reality. The validity of this model will be
demonstrated through an illustrative example. A case study will be used as the
research method to evaluate this model in a real construction situation through the use
of scenarios of specific construction operations. After the selection of the construction
project and the investigation of project background, site visits and interviews of on-site
construction personnel, whose work places are based on the site office and construction
work sites, will be conducted. The interview will focus on the investigation of
respondents’ roles, their responsibility, construction processes they are involved in,
information they retrieve and transfer on sites, and information sources and
destinations. Based on the real construction circumstance, the illustrative scenarios
will be set up to demonstrate the processes of selecting mobile computing strategy that
were identified in the developed model.

Conclusions
The aim of this paper was to explore how mobile computing can be used on construction
sites to manage on-site information. From the review of previous research, on-site
information has been grouped from different perspectives with the discussion of the
current status and problems of construction site information management. Mobile
computing, consisting of mobile devices, wireless networks and mobile applications,
should have the necessary functions for it to be used in construction. These functions
include mobility and durability of hardware, compatibility of hardware and operating
system (OS), and continuous computing environment. Currently available mobile
applications includes mobile CAD, data capture and project management software. The
research reported in this paper, involved three main stages: a pilot study, a survey, and
finally the development and evaluation of a model for the development of mobile
computing for construction site information management. The survey has identified the
information needs of particular users and the nature of on-site information and provided
supports to the development of the model. The conceptual model has identified the key
factors that determine the use of mobile computing in particular circumstance and
explore the interactions and restrictions between these factors through the development
of sub-models. The conclusion of this research will provide valuable guidance in the use
of mobile computing on construction sites, from a user perspective. But further work is
 Mobile
computing

19

Figure 4.
The process of selecting
mobile computing
technologies
ECAM required to validate and evaluate it in a real construction situation, for example through
the use of scenarios of specific construction operations.
15,1
References
Bowden, S., Dorr, A., Thorpe, A. and Anumba, C.J. (2004), “Mapping site processes for the
introduction of mobile IT”, in Dikbas, A. and Scherer, R. (Eds), Proceedings of the 5th
20 European Conference on Product and Process Modelling in the Building and Construction
Industry, Istanbul, Turkey.
Chen, Y. and Kamara, J.M. (2005a), “Mobile computing and information management in
construction”, in Sariyildiz, S. and Tuncer, B. (Eds), Proceedings, 3rd International
Conference on Innovation in Architecture, Engineering and Construction. Rotterdam, The
Netherlands.
Chen, Y. and Kamara, J.M. (2005b), “The use of mobile computing in construction information
management”, in Khosrowshahi, F. (Ed.), Proceedings of the 21st Annual Conference of the
Association of Researchers in Construction Management (ARCOM) SOAS, London.
Chen, Y. and Kamara, J.M. (2006), “Managing construction site information using mobile
computing”, in Dulaimi, M. (Ed.), Proceeding of The Joint International Conference on
Construction Culture, Innovation and Management (CCIM), Dubai.
COMIT (2003), Current Status of Mobile IT. Construction Opportunities for Mobile IT, COMIT.
de la Garza, J.M. and Howitt, I. (1998), “Wireless communication and computing at the
construction jobsite”, Automation in Construction, Vol. 7, pp. 327-47.
Kimoto, K., Endo, K., Iwashita, S. and Fujiwara, M. (2005), “The application of PDA as mobile
computing system on construction management”, Automation in Construction, Vol. 2005,
pp. 500-11.
Lee, U.-K. and Kang, K.-I. (2006), “Mass concrete curing management based on ubiquitous
computing”, Computer-aided Civil and Infrastructure Engineering, Vol. 21, pp. 148-55.
Rebolj, D. and Menzel, K. (2004), “Mobile computing in construction (Editorial)”, Electronic
Journal of Information Technology in Construction, Vol. 9, pp. 281-3.
Scott, S. and Assadi, S. (1999), “A survey of the site records kept by construction supervisors”,
Construction Management and Economics, Vol. 17, pp. 375-82.
Singhvi, V. and Terk, M. (2003), “Prophet: a contextual information system framework”, in
Amor, R. (Ed.), Proceedings of the CIB W78’s 20th International Conference on
Construction IT, Construction IT Bridging the Distance, CIB Report 284. New Zealand,
Waiheke Island.
Tenah, K.A. (1986), “Information needs of construction personnel”, Journal of Construction
Engineering and Management, Vol. 112, pp. 101-18.
Tserng, H.P. and Dzeng, R.-J. (2005), “Mobile construction supply chain management using PDA
and bar codes”, Computer-aided Civil and Infrastructure Engineering, Vol. 20, pp. 242-64.
Ward, M.J., Thorpe, A. and Price, A.D.F. (2003), “SHERPA: mobile wireless data capture for
piling works”, Computer-aided Civil and Infrastructure Engineering, Vol. 18, pp. 299-312.

Corresponding author
John M. Kamara can be contacted at: [email protected]

To purchase reprints of this article please e-mail: [email protected]

Or visit our web site for further details: www.emeraldinsight.com/reprints