MATERIAL SAFETY DATA SHEET

TECHNO ZEVA 1 (SYNTHETIC PAINT)

SECTION 1 : Identification of the substance/mixture and of the company undertaking

1.1 Product identifier
Product name : ZEVA 1
Product Description : Paint
Product Type : Liquid
Other means if identification : Not Available

1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses
Used in Coatings - Industrial use
Use in Coatings - Professional use

1.3 Details of the supplier of the safety data sheet

PT. WAHANA KREATIF INDONESIA
Jl. MH Thamrin Ruko Plaza Menteng Blok C/15
Kel. Cibatu Kec. Cikarang Selatan, Bekasi, Jawa Barat – INDONESIA
Fax Number :-
Emergency telephone number : 021-8990 3694
1.4 Emergency telephone number
Emergency telephone number :-

SECTION 2 : Hazards identification

2.1 Classification of the substance or mixture
Product definition : Mixture
Classification according to regulation (EC) No. 1272/2008 [CLP/GHS]
Flam. Liq. 3, H226
Skin Irrit. 2, H315
STOT RE 1. H372
Aquatic Chronic 3, H412
Classification according to directive 1999/45/EC [DPD]
The product is classified as dangerous according to Directive 1999/45/EC and its amendments
Classification : R09
Xn; R20/21, R48/20
Xi; R38
R52/53
Physical/chemical : Flammable
Hazards
Human health hazards : harmful by inhalation and contact with skin. Hamful: danger of serious damage
to health by prolonged exposure through inhalation. Irritating to skin.

Enviromental hazards : Harmful to aquatic organisms, may cause long-term adverse effects in aquatic environment
See Section 16 for the full text of the R Phrases or H statements declared above.
See Section 11 for more detailed information on health effects and symptoms

2.2 Label elements

Hazard pictograms :

Signal word : Danger

Hazard statements : Flammable liquid and vapour
Causes skin irritation
Causes damage to organs through prolonged or repeated exposure.
Harmful to aquatic life with long lasting effect
Precautionary statements
General : Not Applicable.
Prevention : Wear protective gloves. Keep away from heat, hot surface, sparks, open flames
and other ignition sources. No smoking. Avoid release to the environment.
Do not breathe vapour or spray.
Response : Get medical attention if you feel unwell. If skin irritation occurs: Get medical
attention.
Storage : Keep cool
Disposal : Not Applicable.
Hazardous ingredients : xylene
Naphtha (petroleum), hydrodesulfurized heavy (<0.1% Benzene)
Supplemental label : Not Applicable.
elements

2.3 Other hazards

Other hazards which do : None know
not result in classification

SECTION 3 : Composition/information in ingredients

Substance/mixture

Classification

Product/ingredient name Identifiers % Regulation (EC)No. Type Notes

67/548/EEC
1272/2008(CLP)

xylene REACH #: ≥ 09 - R10 Flam. Liq. 4, H226 [1] [2] B

01-2119488216-32 < 15
EC: 215-535-7 Xn; R20/21 Acute Tox. 5, H312
CAS: 1330-20-7 Xi; R38 Acute Tox. 5, H312
Index: 601-022-00-9 Skin Irrit. 1, H315
Naphtha (petroleum), REACH #: ≥8- R 09 Flam. Liq. 3, H226 [1] [2]
hydrodesulfurized 01-2119458049-33 < 17
heavy (<0.1% EC: 265-185-4 Xn; R48/20, R65STOT SE 3, H336
Benzene) CAS: 64742-82-1 R66, R57 STOT RE 1, H372 I-H
Index: 649-330-00-2 N; R51/53 Asp. Tox. 1, H304
Aquatic Chronic 2,
H411

SECTION 4 : First aid measure

4.1 Description of first aid measure
General : In all cases of doubt, or when symptoms persist, seek medical attention. Never give
anything by mouth to an unconscious person. If unconscious, place in recovery
position and seek medical advice
Inhalation : Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is
irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by
trained personnel.
Skin contact : Remove contaminated clothing and shoes. Wash skin thirougly with soap and
water or use recognised skin cleanser. Do NOT use solvents or thinners
attention.
Eye Contact : Check for and remove any contact lenses. Immediately flush eyes with soap and
water for at least 15 minutes, keeping eyelids open. Seek immediate medical
attention
Ingestion : If swallowed, seek medical advice immediately and show the container or label.
Keep person warm and at rest. Do Not induce vomiting
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It
may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.

4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact : No know significant effects or critical hazards.
Inhalation : No know significant effects or critical hazards.
Skin contact : Causes skin irritation
Ingestion No know significant effect or critical hazards
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may incude the following:
pain or irritation
watering
redness
Inhalation : No specific data
Skin contact : Adverse symptoms may include the following
irritation
redness
Ingestion : No specific data
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled
Specific treatment : No specific treatment

SECTION 5 : FIREFIGHTING MEASURE

5.1 Extinguishing media
Suitable extinguishing : Recommended: alcohol-resistant foam, CO2
media
Unsuitable extinguishing : Do not use water jet
media
5.2 Special hazards arising from the substance or mixture
Hazardous thermal : Flammable liquid and vapour. In a fire or if heated, a pressure increase will occur
decomposition products and the container may burst, with the risk of a subsequent explosion. Runoff to
sewer may create fire or explosion hazard. This material is harmful to aquatic life
with long lasting effects. Fire water contaminated with this material must be
contained and prevented from being discharged to any watermay, sewer or drain
Hazardous thermal : Decomposition products may include the following materials:
decomposition products carbon dioxide
carbon monoxide
metal oxide/oxides
SECTION 6 : Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any risk or without suitable training.
personnel
For emergency responders : If specialised clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsutable materials
6.2 Enviromental : Avoid dispersal of split material and runoff and contact wiyh soil, waterways,
precautions drains and sewers
6.3 Methots and material for containment and cleaning up
Small spill : Stop leak if without risk

SECTION 7 : Handling and storage

The infromation in this section contains generic advice and guidance. The list of identified Uses in Section 1 should be
consulted for any available use-specific information procided in the Exposure Scenario(s)
7.1 Precautions for safe handling
Prevent the creation of flammable or explosive concentrations of vapours in air and avoid vapour concentrations higher
than the occupational exposure limits.
in adition, product should only be used in areas ffrom which all naked light and other sources of ignition have
been excluded, electrical equipment should be protected to the appropriate standard.
7.2 Conditions for safe storage, including any incompatibilities
Store in accordance with local regulations.
Notes on joint storage
Keep away from : oxidising agents, strong alkalis, strong acids.
Additional information on storage conditions
abserve label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight. Keep
away from from sources of ignition
7.3 Specific end use(s)
Recommendations : Not available.
Industrial sector specific : Not available.
solutions

SECTION 8 : Exposure controls/personal protection

The information In this section contains generic advice and guidance. The list of identified Uses in section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s)
8.1 Exposure controls
Appopriate engineering : Use only with adequete ventilation. Use process enclosures, local exhaust
controls ventilation or other engineering controls to keep worker exposure to airborne
contaminants below any recommended or statutory limits. The engineering
controls also need to keep gas, vapour or dust concentrations below any lower
explosive limits. Use explosion-proof ventilation equipment
Individual protection measures
Hygiene measure : Wash hands, forearms and face througly after handling chemical products,
before eating, smoking and using the lavatory and at the end of the working period.
appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing.
Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk
 assessment indicates this is necessary to avoid exposure to liquid splashes,mists,
gases or dusts. If contact is possible, the following protection should be worn,
unless the assesment indicates a higher degree of protection
Skin Protection
Hand protection : There is no one glove materoal or combination of materials that will give unlimited
resistance to any individual or combination of chemicals.
the breakthrough time must be greater than the end use time of the product.
the instruction and information provide by glove manufacture on use,
storage, maintenance and replacement must be followed.
gloves shiuld be replaced regularly and if there is any sign if demage to the glove material
Body Protection : Personal protective equipment for the body should be selected based on the task
being performed and the risk involved and should be approved by a specialist
before handling this product. When there is a risk of ignition from static electricity
wear anti-static protective clothing.
Other skin protection : Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by s specialist before handling this product
Respiratory protection : If workers are exposed to concentrations above exposure limit, they must use
appropriate, certified respirators.
Environmental exposure : Emissions from ventilation or work process equipment should be checked to
controls ensure they comply with requirements of enviromental protection legistation.
in some cases, fume scrubbers, filters or engineering modification to the process
equipment will be necessary to reduce emissions to acceptable levels.

SECTION 9: Physical and chemical properties

9.1 Information in basic physical and chemical properties

Appearance
Physical state : Liquid
Colour : Various Colours
Odour : Characteristic
Odour threshold : Not available
pH : Not applicable
Melting point/freezing point : Not applicable
Flash Point : Closed cup: 28°C
Flammability ( solid, gas) : Not applicable
Burning time : Not applicable
Burning rate : Not applicable
Upper/lower flammability or : 0.5-8%
explosive limits
Vapour density : Highest know value: 3,9 ( Air : 1 ) (xylene). Weigted average: 3.7 ( Air=1)
Relative density : 1.33 g/cm3
Solubility(ies) : Insoluble in the following materials: cold water and hot water
Partition coefficient:n-octanol/ : Not Available
water
Auto-ignition temperature : Lowest know value:>200°C (>392°F) (Naphtha (Petroleum), hydrodesulfurized
Heavy )
Decomposition temperature : Not Available
Viscosity
Explosive properties : Not Available
Oxidising Properties : Not Available
9.2 Other information
No additional information

SECTION 10: Stability and reactivity

10.1 Reactivity : No specific test data related to reactivity available for this product or its ingredients
10.2 Chemical stability : The product is stable
10.3 Possibilitu of : Under normal condition of storage and use, hazardous reactoins will not occur
hazardous reactions
10.4 Conditions to avoid : Avoid all possible sources of ignition (spark or flame). Do not pressurise, cut, weld,
braze, solder, drill, grinf or expose containers to heat or sources of ignition.
10.5 Incompatible materials : Reactive or incompatible with the following materials:
oxidizing materials
10.6 Hazardous : Under normal conditions of storage and use, hazardous decompositions products
decomposition products should not be produced.

SECTION 11: Toxological information

11.1 Information on toxicological effect
There are no data available on the mixtire itself. The mixture has been assessed following the conventional method of
the dengerous Preparations directive 1999/45/EC and classified for toxicological hazards accordingly. See sections 2
and 15 for details.

Product/igredient name Result Species Dose Exposure

LC50 Inhalation Gas Rat 6750ppm 3 hours
Xylene
LD50 Oral Rat 4350 mg/kg -
ethylbenzene LC50 Inhalations Gas. Rabbit 4000ppm 3 hours
LD50 Dermal Rabbit >5000mg/kg -
LD50 Oral Rat 3000 mg/kg -

Acute toxicity estimates

Route ATE VALUE
Dermal 4113,7 mg/kg
Inhalation (Vapours) 30,40 mg/I

Specific target organ toxicity (single exposure)

Route of
Product/ingredient name Category Target organs
exposure
Naphtha (petroleum), hydrodesulfurized heavy Category 3 Not Applicable Narcotic effects
(<0.1% Benzene )
Naphtha (petroleum), hydrodesulfurized heavy Category 1 Not Determined Not Determined
(<0.1% Benzene)

Aspiration hazard
Product/ingredient name Result
Naphtha (petroleum), hydrodesulfurized ( <0.1% ASPIRATION HAZARD - Category 1

SECTION 12: Ecological information

12.1 Toxicity
Product/ingredient name Result Species Exposure
Naphtha (petroleum), Acute EC50 <10 mg/I Daphnia 45 hours
hydrodesulfurized heavy ( 0.
1% Benzene) Acute IC50 <10 mg/I Algae 68 hours
Acute LC50 <10mg/l Fish 80 hours

12. 3 Mobility in soil

Soil/water partition : Not available
coefficient (Koc)
Mobility : Not available

12.4 Result if PBT and vPvB assessment

PBT : Not Applicable
vPvB : Not Applicable

12.5 Other adverse effect : No known significant effect or critical hazards.

SECTION 13: Disposal considerations

The information in this section contains generic advice and guidance. The list of identified Uses in Section 2 should be
consulted for any available use-specific information provided in the Exposure Scenario(s)

13.1 Wate treatment methods

Do not allow enter drains or watercourses. Material and/or container must be disposed of as hazardous waste.
European waste catalogue : 08 01 11 * Waste paint and varnish containing organic solvents or other dengarous
substances if this product is mixed with other wastes, this code may no longer apply.
information, contact your local waste authorit.

SECTION 14 : Transpor information

Transport within user's premises : always transport in closed containers that are upright and secure. Ensure that
persons transporting the product know what to do in the event of an accident or spillage.
Transport in accordance with ADR/RID, IMDG/IMO and ICAO/IATA and national regulation.
International transport regulations
14.1 UN number : 1274
14.2 UN proper shipping : Paint
name
14.3 Transport hazard :3
class(es)

14.4 Packing group : III

14.5 Environmental : No.
Hazards
14.6 Special precautions : Transport within user's premises : always transport in closed containers that are
for user upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.
Additional information
ADR / RID : Tunnel restriction code: (D/E)
Hazard identification number: 30
Special provisions: 640E
ADR/RID : Viscous substance. Not restricted, ref. chapter 2.2.3.1.5 (applicable to
receptacles <450 litre capacity).
IMDG : Emergency schedule (EmS)
F-E, S-E
IMDG : Viscous substance. Transport in accordance with paragraph 2.3.2.5
(applicable to receptacles < 30 litre capacity).
SECTION 15 : Regulatory information
15.1 Safety, health and environmental regulations/legistation specific for the substance or mixture
EU Regulation (RC) No. 1970/2006 (REACH)
Annex XIV -List of substance subject to authorisation
Substance of very high concern
none of the components are listed
15.2 Chemical Safety : This product contains substance for which Chemical Safety Assessment are still
Assessment required.

SECTION 16 : Other information

Indicates informations that’s has changed from previosly issued version
Abbreviations and : ATE = Acute Toxicity Estimate
acronyms CLP = Classification, Labelling and Packaging Regulation [Regulation (EC] No.
1272/2008]
DNEL = Derived No Effect Level
EUH statement = CLP-specific Hazard statement
PNEC = Predicted No Effect Concentration
RRN = REACH Registration Number
Full text of classifications : F - Highly flammable
[DSD/DPD] Xn - Harmful
Xi - Irritant
N - Dangerous for the enviroment
Date of printing : 14.04.2019
Date of issue/Date of : 14.04.2019
revision
Date of previous issue : 25.07.2016
Version :4
Notice to reader
The information in this document is given to the best of techno knowledge, based on laboratory testing and pratical
experience. Techno product are considered as semi-finished goods and as such, product are often use under conditions
beyond techno control. Quality of the product techno cannot guarantee anything but the itself. Minor product variations
may be implemented in order to comply with local requirements. Techno reserves the right to chage the given data
without further notice users should always consult techno for specific guidance on the general suitability of this product
for their needs and specific application practices if there is any inconsistency between language issues of this document,
the English (United Kingdom) version will prevail.