Scribd
Upload
214 views

AF08 Parts

This document provides a parts list in 3 sentences or less: The document lists 44 item numbers along with part numbers, quantities, designations, materials, and standards for the component parts of a hollow-shaft speed reducer AF 08. Materials listed include steel, cast iron, and various seals and bearings. Notes provide additional information on some components.

Uploaded by

wong jian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
214 views

AF08 Parts

This document provides a parts list in 3 sentences or less: The document lists 44 item numbers along with part numbers, quantities, designations, materials, and standards for the component parts of a hollow-shaft speed reducer AF 08. Materials listed include steel, cast iron, and various seals and bearings. Notes provide additional information on some components.

Uploaded by

wong jian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Component parts

Hollow-shaft speed reducer AF 08

0599 EN/XA 930 124 49 721 IS 913.20 1


2
Alterations compared with previous issue
Example
#7 367 202 99 2 O RING 107,67X 1,78 N NBR 70 DIN- 3771
3
Hollow-shaft speed reducer AF 08

62 65
61 64 66

60

12 69
14 19 67
68 70
11 13 15 16 17 18 20
9 37
12 10 36
25
21 23
40 35
8 79 26 27

29

38

31 30 39 8
30 32 33, 34 9

4 5 6
7 7 44 41
2 3
41 42 41 41 43

52 53 54 56

47
45 45
46 48 45
45 49 51

50

4 42241044.eps
Hollow-shaft speed reducer AF 08

Item No Part Number Quantity Designation Material Standard

2 300 241 44 4 LOCK.SCR M12X35 VB.RIPP 1) 100 N01189199


3 716 318 44 1 FLANGE 250 1)
4 319 253 99 10 CH HD SCREW M 8 X 65 10.9 DIN 912
5 343 108 99 10 LOCK WASHER 8 A FEDST DIN 127
6 716 316 44 1 GEARBOX COVER KTL
6 716 312 44 1 GEARBOX COVER
7 716 311 44 1 BUSH 8,5X 14 X12
8 313 275 99 5 SCREW PLUG M12X1,5 4.6 DIN 908
9 367 073 99 6 O-RING 10 X 2 B NB 70 DIN 3770
10 313 435 44 1 VENT PLUG M 12X1,5
10 007 288 98 1 AIR VENT VALVE AM12X1,5 2) ST N01181599
11 716 308 44 1 BASE PLATE 1)
12 300 241 44 4 LOCK.SCR M12X35 VB.RIPP 1) 100 N01189199
13 360 602 99 1 GRV. BALL BRG 6302 WLZ-ST !L DIN 625
14 343 490 99 1 SUPPORTING WASHER 3) FEDST DIN 988
15 1 PINION SHAFT 1 4)
16 354 874 99 1 KEY B 8X7X21 5) C 45 K DIN- 6885
16 354 876 99 1 KEY B 8X7X33 6) C 45 K DIN- 6885
17 360 918 99 1 GROOVED BALL BRG. 6205 WLZ-ST !L DIN 625
18 376 530 99 1 SEALINGRING A 35X47X7 NBR !L DIN 3760
19 716 369 44 1 BUSH 24,8X 35 X11 7)
20 716 368 44 1 TUBE 35X5X12 5)
21 360 603 99 1 GRV. BALL BRG 6303 WLZ-ST !L DIN 625
23 1 CLUSTER GEAR 1 4)
25 361 853 99 1 CYL.RO.BRG.NJ 2203 WLZ-ST DIN 5412
26 361 231 99 1 CYL.RO.BRG.NJ 305 E WLZ-ST !L DIN 5412
27 1 CLUSTER GEAR 2 4)
29 360 605 99 1 GRV. BALL BRG 6305 WLZ-ST DIN 625
30 366 375 99 2 SEAL. RING AS 70X100X10 NBR !L DIN- 3760
31 360 454 99 1 GRV. BALL BRG 16014 WLZ-ST DIN 625
32 360 454 99 1 GRV. BALL BRG 16014 KTL WLZ-ST DIN 625
32 360 514 99 1 GROOVED BALL BRG. 6014 WLZ-ST DIN 625
33 716 332 44 1 OUTP.WHEEL EVO N45X2X21 1) 4)
33 716 333 44 1 OUTP.WHEEL EVO N50X2X24 1) 4)
33 716 344 44 1 OUTPUT WHEEL KEY 1) 4)
34 716 328 44 1 OUTPUT WHEEL SHRINK FIT 1) 4)
35 716 389 44 1 SHRINK DISK 8) AF-GETR.
36 716 313 44 1 GEARBOX SEAL
37 716 314 44 1 GEAR CASING KTL
37 716 304 44 1 GEAR CASING
38 350 961 99 4 GROOVED PIN 2,6X 5 ST A2F DIN- 1476
39 005 081 84 1 RAT.PLATE GEARBOX 9)
40 810 388 44 1 DUST CAP F.AF08
41 354 340 99 1 KEY A14X 9X100 10) C 45 K DIN 6885
42 813 490 46 1 OUTPUT SHAFT W/GEARW. 11)
43 716 335 44 1 OUTPUT SHAFT CPL.COVER 12)
44 813 491 46 1 OUTPUT SHAFT W/GEARW. 13)
45 718 207 44 1 COUPLING HALF H 1N-24 MOT. 71/80/90/100
45 718 304 44 1 COUPLING HALF H 2N-24 MOT. 112/125
46 342 524 99 1 RETAINING RING 24X1,2 FEDST DIN 471
47 718 221 44 1 ROLL.SPIDER COUPL.H1 MOT. 71/80/90/100
47 718 321 44 1 ROLL.SPIDER COUPL.H2 MOT. 112/125
48 342 514 99 1 RETAINING RING 14 X 1 MOT. KBV 71 FEDST DIN 471
48 342 516 99 1 RETAINING RING 16X1 MOT. 71 FEDST !L DIN 471
48 342 519 99 1 RETAINING RING 19X1,2 MOT. 80 FEDST DIN 471
48 342 525 99 1 RETAINING RING 25X1,2 MOT. 90/100 FEDST DIN 471
48 342 528 99 1 RETAINING RING 28X1,5 MOT. 112 FEDST DIN 471

93012401.tbl

1) Optional 8) Only for output wheel, item no. 33


2) For use under arduous conditions 9) Left blank
3) Only for pinion shaft 1, part no. AF 08 716 354 44, 10) 2 off for shaft with 2 output ends
4) See pages 7 11) With two output ends
5) For size 1 coupling 12) Output shaft on cover side
6) For size 2 coupling 13) Output shaft on motor side
7) Sealed with Loctite 675. 5
Hollow-shaft speed reducer AF 08

Item No Part Number Quantity Designation Material Standard

49 718 204 44 1 COUPLING HALF H 1N-14 Mot. KBV 71 1)


49 718 205 44 1 COUPLING HALF H 1N-16 Mot. 71 1)
49 718 206 44 1 COUPLING HALF H 1N-19 Mot. 80 1)
49 718 207 44 1 COUPLING HALF H 1N-24 Mot. 90/100 1)
49 718 305 44 1 COUPLING HALF H 2N-28 Mot. 112 1)
49 718 306 44 1 COUPLING HALF H 2N-32 Mot. 125 1)
50 718 223 44 1 COUPLING HALF HT1N-16 Mot. 71 2)
50 718 226 44 1 COUPLING HALF HT1N-19 Mot. 80 2)
50 718 228 44 1 COUPLING HALF H 1N-24 Mot. 90 2)
50 718 229 44 1 COUPLING HALF H 1N-24 Mot. 100 2)
50 718 325 44 1 COUPLING HALF H 2N-28 Mot. 112 2)
50 718 326 44 1 COUPLING HALF H 2N-32 Mot. 125 2)
51 300 209 44 4 LOCK.SCR M 6X18 VB.RIPP Mot. 71 100 N01189199
51 300 217 44 4 LOCK.SCR M 8X20 VB.RIPP Mot. 80/90 100 N01189199
51 300 229 44 4 LOCK.SCR M10X25 VB.RIPP Mot. 100 100 N01189199
51 300 230 44 4 LOCK.SCR M10X30 VB.RIPP Mot. 112 100 N01189199
51 300 241 44 4 LOCK.SCR M12X35 VB.RIPP Mot. 125 100 N01189199
52 715 320 44 1 INTERM.FLANGE 200.1 Mot. 71
52 715 322 44 1 INTERM.FL. D08 200.2 Mot. 80/90
52 715 324 44 1 INTERM.FL. D08 200.3 Mot. 100
52 715 326 44 1 INTERM.FL. D08 200.4 Mot. 112
52 715 328 44 1 INTERM.FLANGE 200.5 Mot. 112
53 300 230 44 4 LOCK.SCR M10X30 VB.RIPP 100 N01189199
54 354 577 99 1 KEY B 5X 5X 20 MOT. 71 C 45 K DIN 6885
54 354 846 99 1 KEY AB 5X 5X 20 MOT. KBV 71 C 45 K DIN 6885
54 354 257 99 1 KEY B 6X6X20 Mot. 80 C 45 K DIN 6885
54 354 571 99 1 KEY B 8X7X20 Mot. 90/100 C 45 K DIN 6885
54 354 575 99 1 KEY B 8X7X32 Mot. 112 C 45 K DIN 6885
54 354 471 99 1 KEY B 10X8X2 Mot. 125 C 45 K DIN 6885
56 MOTOR
56 1 KBA 71,80,90,100,112,125 3) 4)
56 1 KBF 71,80,90,100,112 3) 4)
60 811 208 44 1 TORQUE ARM AF08 CPL. (ITEMS 61, 62, 64 - 69)
61 321 574 99 1 CHEESE HD.SCREW M16 X90 10.9 A2F DIN 912
62 316 218 99 1 WASHER 17 X 30 X 4 C 45A2E HV DIN 6916
64 811 214 44 2 SPRING ELEMENT
65 160 630 99 1 WASHER 17 X 45 X 6 C 35 H DIN 6340
66 334 614 44 1 LOCK NUT V M16 8 A2F DIN 980
67 002 972 98 4 SET NUT M16 A2F N01079399
68 316 218 99 4 WASHER 17 X 30 X 4 C 45A2E HV DIN 6916
69 309 699 99 4 HEXAGON SCREW M16 X 70 10.9 A2F ISO 4017

93012402.tbl

1) Light type
2) Heavy type
3) For motor components see component parts list:
KBA/KBF 200 039 84 - KBV 200 299 84
4) When ordering complete motor, give data as follows:
e.g. : KBF 80 A 2 GB 14 230/400V AB or
6 KBA 80 A 2 GV 14 230/400V DB
AF 08 gearing components, for drive by Z5
Z4
Z1
KB 71, 80, 90, 100, 112 or 125 motor i3
i2
i1 n1

n2
Z3
Z6 Z2
41965644.eps

Motor Item No.

15 23 27 33/34

2 poles 4 poles 6 poles 8 poles Designation

Output wheel
Pinion shaft 1 Cluster gear 1 Cluster gear 2

n1 n1 n1 n1
z1 z2 z3 z4 z5 z6
2800 1400 930 700

Gear ratio
Part number
i vorhanden n2 n2 n2 n2 ( z = teeth)
1/min 1/min 1/min 1/min
z = 15 m = 1,0 z = 83 m = 1,0 z = 15 m = 1,25 z = 83 m = 1,25 z = 16 m = 2,0
142 20 10 6,3 5
716 354 44 813 451 46 813 478 46
z = 15 m = 1,0 z = 83 m = 1,0 z = 16 m = 1,25 z = 81 m = 1,25 z = 16 m = 2,0
130 22,4 11,2 7,1 5,6
716 354 44 813 452 46 813 479 46
z = 15 m = 1,0 z = 83 m = 1,0 z = 18 m = 1,25 z = 80 m = 1,25 z = 16 m = 2,0
114 25 12,5 8 6,3
716 354 44 813 453 46 813 480 46
z = 15 m = 1,0 z = 83 m = 1,0 z = 15 m = 1,6 z = 61 m = 1,6 z = 16 m = 2,0
104 28 14 9 7,1
716 354 44 813 454 46 813 481 46
z = 18 m = 1,0 z = 80 m = 1,0 z = 18 m = 1,25 z = 80 m = 1,25 z = 16 m = 2,0
91,4 31,5 16 10 8
716 356 44 813 455 46 813 480 46
z = 18 m = 1,0 z = 80 m = 1,0 z = 15 m = 1,6 z = 61 m = 1,6 z = 16 m = 2,0
83,6 35,5 18 11,2 9
716 356 44 813 456 46 813 481 46
z = 18 m = 1,0 z = 80 m = 1,0 z = 17 m = 1,6 z = 60 m = 1,6 z = 16 m = 2,0
72,5 40 20 12,5 10
716 356 44 813 457 46 813 482 46
z =17 m = 1,25 z = 61 m = 1,25 z = 15 m = 1,6 z = 61 m = 1,6 z = 16 m = 2,0
67,5 45 22,4 14 11,2
716 358 44 813 458 46 813 481 46
z = 17 m = 1,25 z = 61 m = 1,25 z = 17 m = 1,6 z = 60 m = 1,6 z = 16 m = 2,0
58,6 50 25 16 12,5
716 358 44 813 459 46 813 482 46
z = 20 m = 1,25 z = 57 m = 1,25 z = 15 m = 1,6 z = 61 m = 1,6 z = 16 m = 2,0
53,6 56 28 18 14 z = 74 m = 2,0
716 360 44 813 460 46 813 481 46
716 332 44
z = 20 m = 1,25 z = 57 m = 1,25 z = 17 m = 1,6 z = 60 m = 1,6 z = 16 m = 2,0
46,5 63 31,5 20 16 716 333 44
716 360 44 813 461 46 813 482 46
716 344 44
z = 24 m = 1,25 z = 54 m = 1,25 z = 15 m = 1,6 z = 61 m = 1,6 z = 16 m = 2,0 716 328 44
42,3 71 35,5 22,4 18
716 362 44 813 462 46 813 481 46
z = 20 m = 1,25 z = 57 m = 1,25 z = 20 m = 1,6 z = 56 m = 1,6 z = 16 m = 2,0
36,9 80 40 25 20
716 360 44 813 463 46 813 483 46
z = 26 m = 1,25 z = 53 m = 1,25 z = 17 m = 1,6 z = 60 m = 1,6 z = 16 m = 2,0
33,3 90 45 28 22,4
716 363 44 813 464 46 813 482 46
z = 24 m = 1,25 z = 54 m = 1,25 z = 20 m = 1,6 z = 56 m = 1,6 z = 16 m = 2,0
29,1 100 50 31,5 25
716 362 44 813 465 46 813 483 46
z = 26 m = 1,25 z = 53 m = 1,25 z = 20 m = 1,6 z = 56 m = 1,6 z = 16 m = 2,0
26,4 112 56 35,5 28
716 363 44 813 466 46 813 483 46
z = 24 m = 1,25 z = 54 m = 1,25 z = 24 m = 1,6 z = 53 m = 1,6 z = 16 m = 2,0
23 125 63 40 31,5
716 362 44 813 467 46 813 484 46
z = 26 m = 1,25 z = 53 m = 1,25 z = 24 m = 1,6 z = 53 m = 1,6 z = 16 m = 2,0
20,8 140 71 45 35,5
716 363 44 813 468 46 813 484 46
z = 28 m = 1,25 z = 50 m = 1,25 z = 24 m = 1,6 z = 53 m = 1,6 z = 16 m = 2,0
18,2 160 80 50 40
716 364 44 813 469 46 813 484 46
z = 28 m = 1,25 z = 50 m = 1,25 z = 25 m = 1,6 z = 51 m = 1,6 z = 16 m = 2,0
16,8 180 90 56 45
716 364 44 813 470 46 813 485 46
z = 32 m = 1,25 z = 45 m = 1,25 z = 24 m = 1,6 z = 53 m = 1,6 z = 16 m = 2,0
14,4 200 100 63 50
716 365 44 813 471 46 813 484 46
93012403.tbl

7
Sales and Service Centers in North America
British Columbia Ohio Quebec
19292 60th Ave., Suite 116 29201 Aurora Road 2700 Sabourin
Surrey, British Columbia V3S 8E5 Cleveland, Ohio 44139 Ville St-Laurent, Quebec H4S 1M2
Telephone: (604) 530-5155 Telephone: (440) 248-2400 Telephone: (514) 336-5556
Telefax: (604) 530-5189 Telefax: (440) 248-3874 Telefax: (514) 336-4349
California Ontario Texas
5435 Industrial Parkway 1155 North Service Road West 16430 Aldine-Westfield Road
San Bernardino, California 92407 Oakville, Ontario L6M 3E3 Houston, Texas 77032
Telephone: (909) 880-8800 Telephone: (905) 825-5900 Telephone: (713) 443-7331
Telefax: (909) 880-4469 Telefax: (905) 825-5901 Telefax: (713) 443-7308
Georgia 584 Falconbridge Road, Unit #3 Washington
3625 Swiftwater Park Drive PO. Box 2368, Station “A” 16771 N.E. 80th Street
Suwanee, Georgia 30174 Sudbury, Ontario P3A 4S8 Suite 205
Telephone: (770) 932-0000 Telephone: (705) 524-5044 Redmond, Washington 98052
Telefax: (770) 932-1903 Telefax: (705) 524-5045 Telephone: (206) 883-4668
lllinois Pennsylvania Telefax: (206) 883-4828
1800-E Howard Street 2148 Embassy Drive
Elk Groove Village, lllinois 60007 Lancaster, Pa 17603-2385
Telephone: (841) 593-3100 Telephone: (717) 396-9711
Printed in Germany MBR/0599/5H

Telefax: (841) 956-7621 Telefax: (717) 396-9719


Mannesmann Dematic Corporation
29201 Aurora Road
Cleveland, Ohio 44139
Telephone: (440) 248-2400
Telefax: (440) 248-3086
8 Internet: http://www.dematic-us.com Improvements will be incorporated without prior notice

You might also like