PIPE FITTINGS
& VALVES
PIPE COUPLINGS
HAMMER UNION - FIGURE 602
& FIGURE 602 BUTT WELD
6,000 PSI CWP - 9,000 PSI TEST
FEATURES & APPLICATIONS:
• Compact design is well-suited for
manifold service. Employs a
double seal that combines an
elastomeric gasket with a metal-
to-metal connection.
• Figure 602 is specifically designed
100
to minimize fluid flow turbulence.
400
602
FIGURE
The BUNA-N replaceable lip-type
seal ring that provides this capability
also provides a pressure seal and
FIGURE
FIGURE
FIGURE
protection for the metal-to-metal
seated surfaces. These unions are
recommended for manifold and
truck mounting where size and
weight are critical, as well as air,
1002
water, oil, gas or mud service
where working pressures do not
exceed 6,000 PSI NSCWP.
FIGURE
TECHNICAL DATA:
• Sizes: 1”- 4”
• Pressure Rating: 6,000 PSI NSCWP
200
206
• End Connections: Threaded & Butt-Weld
1002
• Butt-Weld Schedules: 80 (XH)
602
• BUNA-N lip-type seal ring (-20°F to 250°F)
FIGURE
FIGURE
FIGURE
• Color Code: Orange Subs / Black Nut
FIGURE
6000 PSI CWP
BUTT WELD
SIZE FIGURE 602 FIGURE 602
1" HU602-100T ---
1 1/2" HU602-150T ---
2" HU602-200T HU602-200BW
3" HU602-300T HU602-300BW
4" HU602-400T HU602-400BW
1-1/4" MERCH125
Information contained on this page is for general information purposes only. Seal Fast Inc. assumes no responsibility for errors or omissions for this product.
sales@Seal Fast.com 800.231.0734 Seal Fast.com 5603 Harvey Wilson Drive, Houston, TX 77020
PIPE FITTINGS
& VALVES
PIPE COUPLINGS
HAMMER UNION - FIGURE 602 6,000 PSI CWP - 9,000 PSI TEST
Compact design is well-suited for manifold service. Employs a double seal
that combines an elastomeric gasket with a metal-to-metal connection.
400
206
1002
1502
FIGURE
FIGURE
FIGURE
FIGURE
B
C
1502
602
Size / Weight
IN MM Lbs A B C ACME MATERIAL Part #
TPI NUTS SUBS
FIGURE
1” 25 3.55 6.625 1.750 4.500 6 STD SF SF HU602-100T
1 1/2” 40 9.54 4.600 2.570 5.520 4 STD SF SF HU602-150T
2” 50 12.25 5.300 2.970 6.875 3 MOD SF SF HU602-200T ..BW
1002
3” 80 22.30 6.310 4.250 8.875 3 MOD SF SF HU602-300T ..BW
602
4“ 100 32.18 8.300 5.200 10.040 3 MOD SF SF HU602-400T ..BW
200
8” 200 66.65 7.230 9.700 16.125 3 STD DI DI HU100-800T
100
FIGURE
FIGURE
Standard Service Pipe Size(in)
1-1/2” x 1” 4.0551 2.1260 0.1260 1“ SF150100x
CWP Test End
FIGURE
FIGURE
Fig. No. x 1-1/4”
1-1/2” SUB Nut
4.0551 1 11/42.1260
11/2 2 2 1/2 0.1260 3 4 1-1/4“
6 8 SF150125x
Connection FIGURE
1-1/2” x6,000
602 2” 9,000 --- --- --- --- SF150200x
T / BW
2” x 1-1/2” 5.000 2.4803 0.1260 1-1/2“ SF200150x
2’ x 2-1/2” ---
TITLE --- --- --- SF200250x
2” x 3” --- PIPE COUPLINGS
--- - HAMMER
--- UNION
--- FIGURE 602
SF200300x
2-1/2” x 2” 5.7480 2.9528
DISCLAIMER 0.1575 2“ MATERIALSF250200x
All drawings and specifications are subject to change without
3” x 2” 5.7480
notice. Drawings3.3858
represent general 0.1575
dimensions of our 2” SF300200x
products. Seal Fast cannot guarantee the dimensions of the SF
part will exactly match those in the drawing. This drawing is
the property of Seal Fast Inc. Copying or reproduction of this
drawing is expressly prohibited.
PART #
DRAWING NOT TO SCALE HU602-xxxT, BW
sales@Seal Fast.com 800.231.0734 Seal Fast.com 5603 Harvey Wilson Drive, Houston, TX 77020
