Carbon Dioxide Transmitter
with Temperature and RH% Option
Model#: G01-CO2-B10C/30C
Real time carbon dioxide detection and transmitting
High accuracy Temperature and humidity detection
NDIR infrared CO2 sensor with patented self calibration
Provide 3xanalog linear outputs for measurements
Optional LCD display of all measurements
Modbus communication
CE-approval
Features
Design for real time measuring ambiance carbon sensors seamlessly with the digital auto
dioxide level and temperature +RH% compensation
NDIR infrared CO2 sensor inside with special Provide up to three analog linear outputs for
Self Calibration. It makes CO2 measurement measurements
more accurate and more reliable. LCD is optional to display CO2 and temperature
More than 10 years lifetime of CO2 sensor &RH measurements
High accuracy temperature and humidity Optional Modbus communication
measurement 24VAC/VDC power supply
Combined both humidity and temperature EU standard and CE-approval
Application
Building ventilation systems
Industry ventilation systems
Airport, train station, shopping mall, office, classroom and
other public places for air quality measurement and
indication
Lab., warehouse, and other places to detect
CO2+Temp. +RH%
1
Specifications
Carbon Dioxide
Sensing element Non-Dispersive Infrared Detector (NDIR)
CO2 measuring range 0~2000ppm/ 0～5,000ppm optional
CO2 Accuracy @22℃(72℉) ±40ppm + 3% of reading or ±75ppm (whichever is greater)
Temperature dependence 0.2% FS per℃
Stability <2% of FS over life of sensor (15 year typical)
Pressure dependence 0.13% of reading per mm Hg
Calibration ABC Logic Self Calibration Algorithm
Response time <2 minutes for 90% step change typical
Signal update Every 2 seconds
Warm-up time 2 hours (first time) / 2 minutes (operation)
Temperature Humidity
Measuring range 0℃~50℃(32℉~122℉) (default) 0 ~100%RH
Accuracy ±0.4℃ (20℃~40℃) ±3%RH (20%-80%RH)
Display resolution 0.1℃ 0.1%RH
Stability <0.04℃/year <0.5%RH/year
General Data
Power supply 24VAC/VDC
Consumption 1.8 W max. ; 1.2 W avg.
1~3 X analog outputs
Analog outputs 0~10VDC(default) or 4~20mA (selectable by jumpers)
0~5VDC (selected at placing the order)
RS-485 with Modbus protocol, 19200bps rate, 15KV antistatic
Modbus communication (optional)
protection, independent base address.
Operation conditions 0~50℃(32~122℉); 0~95%RH, non condensing
Storage conditions 10~50℃(50~122℉), 20~60%RH non condensing
Net Weight 240g
Dimensions 130mm(H)×85mm(W)×36.5mm(D)
Installation wall mounting with 65mm×65mm or 2”×4”wire box
Housing and IP class PC/ABS fireproof plastic material, protection class: IP30
Standard CE-Approval
2
Models Guide
G01-CO2-B X 0 C –Y 0 Z –U 02/05 –T/TH –Txx
X: LCD or no LCD
1- Without LCD, 24VAC/VDC power supply
3- LCD display, 24VAC/VDC power supply
C: 24VAC/VDC power supply
Y: analog output quantity
3-3Xanalog outputs (for CO2, temperature, humidity)
2-2Xanalog outputs (for CO2, temperature)
1-1xanalog output (for CO2)
0-no analog output
Z: Modbus communication
1-with Modbus communication
0-no Modbus
U: type of analog output
V- 0~10VDC (default)
A- 4~20mA
V5- 0~5VDC (not be changed)
02/05: CO2 range
02- 0~2000ppm
05- 0~5000ppm
T/TH: temperature option/ temperature and humidity option
Txx: temperature scaling
T05: 0℃~50℃(32℉~122℉) default (without the postfix indicates the default)
T06: 0℃~60℃(32℉~140℉)
T26: -20℃~60℃(-4℉~140℉)
Accessory (selectable at placing the order)
921: back plate for wall mounting
921+922: desktop bracket
3
Mounting and Dimensions
85.00 36.50
TONGDY
A1 A2 4.20
9.50
130.00 84.00
60.00 60.00
24Vac/dc GND AN1 AN2 AN3 B A
RS-485
AC/DC
1 2 3 4 5 6 7
CO2 Transmitter/Controller
B1 B2
