KKKT 3243 – Communication

Devices
Lecture 3 – Radio Physics

Original slides from:

Training materials for wireless trainers
 What is a Wave?

2
 What is a Wave?
• Example of oscillations: a pendulum, a tree swaying in the
wind, the string of a guitar
• A singer singing creates periodic oscillations in his or her
vocal cords.
• Compress and decompress the air
• Change of air pressure then leaves the singers mouth
• Travels, at the speed of sound.
• A stone plunging into a lake causes a disturbance, which
then travels across the lake as a wave.
• Waves in water are easy to visualize; drop a stone into the
lake and you can see the waves
• In the case of electromagnetic waves, “What is it that is
oscillating?”
3
 Electromagnetic Waves
‣ Characteristic wavelength, frequency, and amplitude
‣ No need for a carrier medium
‣ Examples: light, Xrays and radio waves

4
 Quick review of unit prefixes

Powers of ten
Nano- 10-9 1/1000000000 n

Micro- 10-6 1/1000000 µ

Milli- 10-3 1/1000 m

Centi- 10-2 1/100 c

Kilo- 103 1 000 k

Mega- 106 1 000 000 M

Giga- 109 1 000 000 000 G

http://apod.nasa.gov/apod/image/1203/scaleofuniverse_huang.swf
5
 Wavelength and Frequency

c=f*λ
c = speed (meters / second)

f = frequency (cycles per second, or Hz)

λ = wavelength (meters)

If a wave on water travels at one meter per second,

and it oscillates five times per second, then each wave
will be twenty centimeters long:
1 meter/second = 5 cycles/second * λ
λ = 1 / 5 meters
λ = 0.2 meters = 20 cm

6
 Wavelength and Frequency
Since the speed of light is approximately 3 x 108 m/s, we
can calculate the wavelength for a given frequency.
Let us take the example of the frequency of 802.11b/g
wireless networking, which is:

f = 2.4 GHz
= 2,400,000,000 cycles / second

wavelength (λ) = c / f
= ???

Therefore, the wavelength of 802.11b/g WiFi is about ???

What is the wavelength of 5.3GHz 802.11a?
7
 Wavelength and Frequency
Since the speed of light is approximately 3 x 108 m/s, we
can calculate the wavelength for a given frequency.
Let us take the example of the frequency of 802.11b/g
wireless networking, which is:
f = 2.4 GHz
= 2,400,000,000 cycles / second

wavelength (λ) = c / f
= 3 * 108 m/s / 2.4 * 109 s-1
= 1.25 * 10-1 m
= 12.5 cm

Wavelength of 802.11b/g WiFi is about 12.5 cm.

Wavelength of 5.3 GHz 802.11a is λ = 3 * 108 / 5.3 * 109 = 5.66 cm
8
 WiFi frequencies
and wavelengths

Standard Frequency Wavelength

802.11 b/g/n 2.4 GHz 12.5 cm

2.4 GHz 802.11 a/n 5.3 GHz 5 to 6 cm

5 GHz
Wavelength of Some Technologies
GSM Phones:
frequency ~= 900 MHz
wavelength ~= 33cm
PCS Phones
frequency ~= 1.8 GHz
wavelength ~= 17.5 cm
Bluetooth:
frequency ~= 2.4 GHz
wavelength ~= 12.5cm
9
 Activity 1

Why do WiFi signal can pass through a wall at your

house?

10
Electromagnetic Spectrum

Approximate range for WiFi

11
Perspective

12
 Behavior of radio waves
‣ There are a few simple rules of thumb
that can prove extremely useful when
making first plans for a wireless
network:
‣ The longer the wavelength, the
further it goes
‣ The longer the wavelength, the
better it travels through and around
things
‣ The shorter the wavelength, the
more data it can transport 5 meter long wave
traveling through boat
‣ All of these rules, simplified as they may (50 m) vs. 50 cm log
be, are rather easy to understand by
example
 Behavior of radio waves
• It is harder to visualize waves moving “through” solid objects, but
this is the case with electromagnetic waves.
• Longer wavelength (lower frequency) waves tend to penetrate
objects better than shorter wavelength (higher frequency) waves.
• FM radio (88-108MHz) can travel through buildings and other
obstacles easily, while shorter waves (such as GSM phones
operating at 900MHz or 1800MHz) have a harder time
penetrating buildings.
• Partly due to the difference in power levels used and shorter
wavelength of FM/GSM signals.
• The faster the wave swings or beats, the more information it can
carry - every beat or cycle could for example be used to transport
a digital bit, a '0' or a '1', a 'yes' or a 'no'.
Activity 2: Network Signal in an Elevator

1. Why you can’t make a phone call or receive network

signal in an elevator?
2. What you should do in the event of emergency?
 Traveling radio waves
Radio waves do not move in a strictly straight line. On
their way from “point A” to “point B”, waves may be
subject to:
‣ Absorption
‣ Reflection
‣ Diffraction
‣ Refraction

16
 Absorption
When electromagnetic waves go through some material,
they generally get weakened or dampened.
Materials that absorb energy include:
‣ Metal. Electrons can move freely in metals, and are
readily able to swing and thus absorb the energy of a
passing wave.
‣ Water molecules jostle around in the presence of
radio waves, thus absorbing some energy.
‣ Trees and wood absorb radio energy proportionally to
the amount of water contained in them.
‣ Humans are mostly water: we absorb radio energy
quite well!
17
 Absorption

• Plastics and similar materials generally do not absorb a lot of

radio energy
• But varies depending on the frequency and type of material.
• Before you build a component from plastic (e.g. weather
protection for a radio device and its antennas), it is a good idea to
verify that the material does not absorb radio energy around
2.4 GHz.
• One simple method of measuring the absorption of plastic at
2.4 GHz is to put a sample in a microwave oven for a couple of
minutes.
• If the plastic heats up, then it absorbs radio energy and should
not be used for weatherproofing.
 Reflection
The rules for reflection are quite simple: the angle at
which a wave hits a surface is the same angle at which it
gets deflected. Metal and water are excellent reflectors of
radio waves.

19
 Reflection
• Although the rules of reflection are quite simple, things can
become very complicated when you imagine an office interior
with many small metal objects of various complicated shapes.
• The same goes for urban situations: look around you in city
environment and try to spot all of the metal objects.
• This explains why multipath effects (i.e. signal reaching their
target along different paths, and therefore at different times)
play such an important role in wireless networking.

20
 Reflection
• We use reflection to our advantage in antenna: e.g. we put
huge parabolas behind our radio transmitter/receiver to collect
and bundle the radio signal into a fine point.
• Big metallic panels can be used as passive radio reflectors to
cover areas that cannot be normally reached using a straight
path, this is sometimes done to increase the TV coverage in
mountain and valley areas.

21
 Diffraction

Because of the effect of diffraction, waves will “bend”

around corners or through an opening in a barrier.

22
 Diffraction
• Microwaves, with a wavelength of several centimeters, will
show the effects of diffraction when waves hit walls,
mountain peaks, and other obstacles.
• It seems as if the obstruction causes the wave to change its
direction and go around corners.
• Note that diffraction comes at the cost of power: the
energy of the diffracted wave is significantly less than that
of the wavefront that caused it.
• But in some very specific applications, you can take
advantage of the diffraction effect to circumvent
obstacles.

23
 Refraction
Refraction is the apparent “bending” of waves when they meet a
material with different characteristics.When a wave moves from
one medium to another, it changes speed and direction upon
entering the new medium.

24
 Other important wave properties
These properties are also important to consider when
using electromagnetic waves for communications.

‣ Phase
‣ Polarization
‣ Fresnel Zone

25
 Phase
The phase of a wave is the fraction
of a cycle that the wave is offset
from a reference point. It is a
relative measurement that can be
express in different ways (radians,
cycles, degrees, percentage).
Two waves that have the same
frequency and different phases
have a phase difference, and the
waves are said to be out of phase
with each other.

26
 Interference
When two waves of the same frequency, amplitude and phase meet, the
result is constructive interference: the amplitude doubles.
When two waves of the same frequency and amplitude and opposite phase
meet, the result is destructive interference: the wave is annihilated.
Interference also happens when two or more waves of different frequencies
meet together: the results are simply more complex and difficult to visualize

27
 Polarization

‣ Electromagnetic waves have electrical and magnetic

components.
‣ The electrical and magnetic components oscillate
perpendicular to each other and to the direction of
the propagation.

28
 Conclusions

‣ Radio waves have a characteristic wavelength, frequency

and amplitude, which affect the way they travel through
space.

‣ WiFi uses a tiny part of the electromagnetic spectrum

‣ Lower frequencies travel further, but at the expense of

throughput.

‣ Radio waves occupy a volume in space, the Fresnel zone,

which should be unobstructed for optimum reception.

29
 Thank you for your attention

For more details about the topics presented in

this lecture, please see the book Wireless
Networking in the Developing World,
available as free download in many languages
at:
http://wndw.net