ILLUSTRATED SPARE PART LIST

FOR

KFP6R-UF25
FM/UL ENGINE S/F FIRE
FIGHTING A/C DOMESTIC

APPLICATION CODE NO.

6H.2583

KIRLOSKAR OIL ENGINES LIMITED

Regd. Office: Laxmanrao Kirloskar Road, Khadki, Pune - 411 003, (India).
Tel.: +91 (20) 2581 0341, 2581 5341. Fax: +91 (20) 2581 3208, 2581 0209.
Website: www.koel.co.in

JUNE – 2015 PUBLICATION NO. : 6H.561.46.0.00 REV.00

1
 GROUP INDEX
APPLICATION CODE 6H.2583

PAGE
SR.NO. DESCRIPTION GROUP NO. QTY.
NO.
1 ADOPTOR FOR SWITCHES 4H.420.4 1 5
AIR CLEANER(DONALDSON) FOR
2 6H.1128 1 6
6R1080TRWA F.F. ENGINES
ALTERNATOR MOUNTING WITH 90 PCD
3 4H.263.3 1 7 TO 8
PULLEY DOUBLE GROOVE
4 BELT GUARD FOR 6RTA ENGINE 6H.1148.2 1 9
BLANKET ASSLY. ON AIR DELIVERY PIPE
5 6H.1142.1 1 10
TO CAC FOR KFP6R-UF25 ENGINE
6 BREATHER PIPE 6H.024.3 1 11
7 CAMSHAFT SF P2 TYPE THRUST WASHER 6H.226 1 12
8 CENTRIFUGE LUB OIL FILTER 6H.021 1 13
9 CHARGING ALTERNATOR 12V 3H.315 1 14
COOLING LINE(1 1/4") WITH FLOW SWITCH 15 TO
10 6H.1156.1 1
FOR 6R1080TA ENGINE 16
11 COVER FOR FUEL PUMP BORE 4H.373 1 17
CRANK CASE SF P2 TYPE THRUST WASHER 18 TO
12 6H.233 1
MTG. 22
CRANK PULLEY 2GR,SPA,WITH VISCUSS
13 6H.338 1 23
DAMPER,W/O EXT PULLEY
24 TO
14 CRANKSHAFT (FMUL) 6H.002.2 1
25
26 TO
15 CYLINDER HEAD (P-TYPE) 6H.147 1
28
16 CYLINDER LINER.(105 DIA) 2H.008 6 29
17 DELIVERY BODY 2H.013...EXP 1 30
18 DIP STICK (20DEG INCL SHORT) 06.248 1 31
ELECTRONIC GOVERNOR SET(ACTUATOR-
32 TO
19 ADC225 D1S-12V & CARD-ESD 5119) & 4H.1475.2 1
33
LINKAGE ASSLY. FOR F.F. APPLN.
20 ENGINE MOUNTING FOOT 6H.033.2 1 34
21 ENGINE NAME PLATE WITH FUEL DATA 4H.1440 1 35
22 EXHAUST GAS OUTLET (S/F K27 TURBO) 6H.1149 1 36
23 EXHAUST MANIFOLD (6RT, V.S. K27 TURBO) 6H.143 1 37
EXHAUST SILENCER INDUSTRIAL TYPE FOR
24 6H.1126 1 38
F.F. ENGINES
25 EXPANSION BELLOW (4") AND MOUNTING F6.550 1 39
FASTENER FOR WATER PUMP PULLEY
26 MOUNTING (FOR HE COOLED FOR F.F. 6H.104.1 1 40
APPLICATION)
27 FIP FOR 6RTA FIRE FIGHTING APPLICATION 6H.1134 1 41
28 FLYWHEEL HOUSING (SAE3-144.5) 4H.038 1 42
29 FLYWHEEL (C-110 PTO & SP-111 PTO) 04.039 1 43
30 FRONT COVER S/F VISCUS DAMPER 6H.357.3 1 44

2
 PAGE
SR.NO. DESCRIPTION GROUP NO. QTY.
NO.
FUEL STOP SOLENOID WITH SUITABLE
31 LINKAGE & HARDWARE FOR FIRE FIGHTING 4H.1357.5 1 45
APPLICATION
32 FUEL SUPPLY & LEAK-OFF SYSTEM 6H.1154.1 1 46
33 GEAR CASING ( FOR FMUL ENGINE ) 6H.311.2 1 47
HEAT EXCHANGER FOR 6R1080TA F.F. 48 TO
34 6H.1145.2 1
ENGINES 49
35 HEAT SHIELD MOUNTING 6H.1153.1 1 50
36 HIGH PRESSURE PIPE (SPP) 6H.009.1 1 51
37 INJECTOR & MOUNTING (SPP) 4H.1529 6 52
38 INLET MANIFOLD(ALUMINIUM 6H.204.4 1 53
INSTRUMENTAL PANEL WITH STANDARD
54 TO
39 REVISION(INDIGENOUS DEVELOPED,FM/UL 6H.1147.4 1
58
TYPE) 12V FOR FIRE FIGHTING APPLN
INTERMEDIATE GEAR & SUPPORT SF AUTO
40 6H.267 1 59
TIMER 6R1080 SERIES
41 LIFTING HOOK 6H.048.1 1 60
LUB OIL COOLER AND FILTER (FOR JACKET 61 TO
42 6H.113...EXP 1
WATER HEATING) 62
63 TO
43 LUB OIL PUMP 6H.047 1
65
LUB OIL SUMP (SHALLOW) S.F.REDUCED
44 6H.378 1 66
WIDTH GEAR CASING
MOUNTING FOR FUEL FILTER (SPIN ON)
45 6H.1146.1 1 67
& FUEL PIPES
46 OIL FILLING BODY (FMUL) 3H.042.1 1 68
47 OIL SEAL HOUSING 6H.045.4 1 69
PISTON AND CON ROD ASSEMBLY 70 TO
48 4H.180.1 6
(TURBO ,P.G. --40 DIA PIN) 71
PULLEY FOR WATER PUMP SPA SECTION, 2
49 4H.262 1 72
GR. (120 PCD)
50 PUSHROD AND TAPPETS 2H.007.3 6 73
74 TO
51 ROCKER COVER (ALUMINIUM) 6H.222...EXP 1
75
SPIN ON FUEL FILTER
52 3H.132 1 76
(MICO NO F002 H20 116)
STARTER SOLENOID (DUMORE) 12V FOR
53 4H.1347 1 77
F.F. ENGINES
STARTER MOTOR MICO MAKE 12V, 3KW,
54 6H.675 1 78
TYPE DE114X2012 V R (3KW) FOR 6R 1040.
55 STICKERS FOR 6R ENGINES 6H.1143 1 79
56 SUCTION TUBE 6H.006 1 80
TEMPRATURE SWITCH & SENSORS FOR 81 TO
57 F6.906.1 1
FM/UL ENGINE 82
THERMOSTAT AND HOUSING ASSEMBLY 83 TO
58 4H.096...EXP 1
(USA) 84
59 TOOLS FOR FIRE FIGHTING APPLICATION 4H.1439 1 85
60 TURBO LUB OIL PIPING (FOR K27) 6H.141.2 1 86
61 TURBOCHARGER FOR 6RTA SPP ENGINE 6H.1135 1 87

3
 PAGE
SR.NO. DESCRIPTION GROUP NO. QTY.
NO.
62 V BELT XPA1280 4H.692 2 88
89 TO
63 VALVE ROCKER ASSLY 6H.012.2 1
91
WATER COOLED CAC AND MOUNTING FOR 92 TO
64 6H.1142 1
F.F. ENGINES 94
WATER HEATER AND MOUNTING 95 TO
65 6H.1144 1
(KIM HOTSTART) 96
66 WATER PUMP 4H.052...EXP 1 97
WIRING HARNESS 6R1080TA F.F.SET
98 TO
67 (REVISED STANDARD FMUL PROJECT) 6H.902.4 1
99
WITH ALTERNATOR & 23-PIN CONNECTOR

NOTE: - AS CONTINUOUS IMPROVEMENTS ARE CONTEMPLATED THE ILLUSTRATION

AND DESCRIPTIONS ARE NOT BINDING.

4
TITLE: - ADOPTOR FOR SWITCHES GROUP: - 4H.420.4

5
3
4
4
2
1
4 4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ADAPTOR FOR WATER TEMP.
1 4H.225.22.0.00 1
SENSOR
ADAPTOR FOR WATER TEMP.
2 4H.225.29.0.PR 1
SWITC
ADAPTOR FOR 2R1040 FOR WATER
3 06.610.08.0.00 2
CONNECTION
4 50.508.12.0.00 COPPER WASHER (14X20) 6
ADAPTOR FOR LOW COOLANT
5 4H.225.35.0.PR 1
TEMP. SWITCH

5
TITLE: - AIR CLEANER (DONALDSON) FOR
GROUP: - 6H.1128
6R1080TRWA F.F. ENGINES

2
10
VA R
C CUM TO
I ND I CA

6
5 1
4

8
3 9
7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

AIR CLEANER
1 6H.1128.01.0.00 (DONALDSON, B105006) FOR 1
6R1080TRWA F.F. ENGINES
2 6H.1128.03.0.00 GUARD (FOR AIR CLEANER) 1
HOSE (TURBO CHARGER TO AIR
3 6H.1128.02.0.00 1
CLEANER)
HOSE T BOLT CLAMP FOR OD
4 KV8.505.13.0.00 112MM JUPITOR JT6 A20 112DN 3
OR EQUIVALENT
5 50.003.08.015. SET SCREW - M8X1.25X15 - 8.8 4
6 50.506.08.000. PLAIN MACHINED WASHER - M8 4
7 50.003.10.020. SET SCREW - M10X1.5X20 - 8.8 5
8 50.006.10.000. NUT - M10X1.5 - GR.8.8 5
9 50.506.10.000. PLAIN MACHINED WASHER - M10 5
RESTRICTION INDICATOR
10 47.113.15.0.00 1
- 20"W.G.

6
TITLE: - ALTERNATOR MOUNTING WITH 90
GROUP: - 4H.263.3
PCD PULLEY DOUBLE GROOVE

2
18 8
7
6
3
17
6

9 12
0
15
11

4 10
0
8
14

15 16

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
MOUNTING SUBASLY.FOR
*1 4H.044.20.0.00 1 OF SR. NO.
ALTERNATOR 2 TO 6
2 48.175.07.0.00 BKT.FOR ALT 1
BUSH FOR ALTERNATOR
3 48.067.04.0.00 1
(IN BRACKET) 32MM
4 50.006.10.000 NUT - M10X1.5 - GR.8 1
DOWEL BOLT FOR ALTERNATOR
5 48.067.03.7.00 1
M10X1.5 (130MM)
6 50.506.10.000 PLAIN MACHINED WASHER - M10 3
7 50.003.10.040 SET SCREW - M10X1.5X40 - 8.8 2
8 50.506.10.000. PLAIN MACHINED WASHER - M10 6
9 4H.263.01.0.00 ALTERNATOR PULLEY (90 PCD) 1
10 4H.329.24.0.00 EYE BOLT (190MM) 1
11 4H.198.06.0.00 LOCATING BOLT (FOR EYE BOLT) 1
12 03.110.02.0.00 SPACER 1
13 50.506.12.000 PLAIN MACHINED WASHER - M12 1
14 50.002.10.040 SET BOLT - M10X1.5X55 - 8.8 1
15 50.006.10.000 NUT – M10X1.5 – GR.8 2

7
TITLE: - ALTERNATOR MOUNTING WITH 90
GROUP: - 4H.263.3
PCD PULLEY DOUBLE GROOVE

2
18 8
7
6
3
17
6

9 12
0
15
11

4 10
0
8
14

15 16

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

16 4H.329.26.0.00 SWIVEL PIECE 1
17 50.003.08.018 SET SCREW - M8X1.25X18 - 8.8 1
18 50.506.08.000 PLAIN MACHINED WASHER - M8 1

8
TITLE: - BELT GUARD FOR 6RTA ENGINE GROUP: - 6H.1148.2

11 2
3
9

10

8 1
12
3
5
4
2

6
7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

BELT GUARD (FOR FIRE FIGHTING
1 6H.1148.01.0.00 1
APPLICATION)
2 50.006.08.000. NUT- M8X1.25 - GR.8.8 8
3 50.506.08.000. PLAIN MACHINED WASHER - M8 8
4 50.003.10.015. SET SCREW - M10X1.5X15 - 8.8 2
5 50.506.10.000. PLAIN MACHINED WASHER - M10 2
ANTI VIBRATION MOUNTING FOR
6 3H.880.02.0.00 CONTROL PANEL TS STANDARD 2
MAKE (20 MM HEIGHT).
HOLDING PLATE (BELT GUARD
7 4H.1361.05.0.00 2
MTG)
8 6H.1148.02.0.00 SUPPORT (FOR BELT GUARD) 1
HOLDING PLATE (BELT GUARD
9 6H.1148.03.0.00 1
MTG)
HOLDING PLATE (FOR
10 4H.1361.03.0.00 1
BELT GUARD MTG.)
11 50.003.08.020 SET SCREW - M8X1.25X20 - 8.8 2
12 50.003.08.025 SET SCREW - M8X1.25X25 - 8.8 1

9
TITLE: - BLANKET ASSLY. ON AIR DELIVERY
GROUP: - 6H.1142.1
PIPE TO CAC FOR KFP6R-UF25 ENGINE

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

BLANKET ON AIR DELIVERY PIPE
1 6H.1142.11.0.00 1
FOR 6R1080TA ENGINES

10
TITLE:- BREATHER PIPE GROUP:- 6H.024.3

2
1
4
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.024.03.0.00 BREATHER PIPE 1
2 6H.024.04.0.00 CLIP (FOR BREATHER PIPE) 1
3 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 1
4 50.506.08.000. PLAIN MACHINED WASHER - M8 1

11
TITLE: - CAMSHAFT SF P2 TYPE THRUST
GROUP: - 6H.226
WASHER

5
6
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
CAMSHAFT,THRUST PLATE AND
*1 6H.226.10.0.00 1 OF SR.NO. -
CAMGEAR SUB ASSEMBLY 2 TO 6
NOT SUPPLIED
2 6H.226.01.0.00 CAM SHAFT (FINISHED) 1 LOOSE
NOT SUPPLIED
3 6H.226.03.0.00 THRUST PLATE 1 LOOSE
NOT SUPPLIED
4 6H.226.02.0.00 CAM GEAR 1 LOOSE
5 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 2
6 50.506.08.000. PLAIN MACHINED WASHER - M8 2

12
TITLE :- CENTRIFUGE LUB OIL FILTER GROUP :- 6H.021

7 5

6 3
4

2
9

10
11

8
9

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
CENTRIFUGE FILTER AND
*1 6H.021.40.0.00 1 OF SR. NO. 2
ADAPTOR ASSEMBLY TO 7
ADAPTOR FOR CENTRIFUGAL LUB
2 6H.021.01.0.00 1
OIL FILTER
3 F6.024.46.0.00 CENTRIFUGE FILTER 1
4 F6.024.75.0.00 JOINT FOR GLACIER FILTER 1
5 50.010.08.025. STUD - M8X1.25X025 - 8.8 4
6 50.506.08.000. PLAIN MACHINED WASHER - M8 4
7 50.006.08.000. NUT- M8X1.25 - GR.8.8 4
8 50.002.08.055. SET BOLT - M8X1.25X55 - 8.8 2
9 50.506.08.000. PLAIN MACHINED WASHER - M8 4
10 50.002.08.105. SET BOLT - M8X1.25X105 - 8.8 1
JOINT FOR CENTRIFUGAL FILTER
11 6H.021.11.0.00 1
ADAPTOR

13
TITLE: - CHARGING ALTERNATOR 12V GROUP: - 3H.315

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ASSEMBLY CHARGING
ALTERNATOR 12V, 35A, MICO
1 3H.315.01.0.00 1
MAKE K1 MODEL NO.F 002 G1B 342
120 DEGREE MOUNTING

14
TITLE : - COOLING LINE(1 1/4") WITH FLOW
GROUP : - 6H.1156.1
SWITCH FOR 6R1080TA ENGINE

6
4
3 5
2 13
7
10 12
9
12

9
5 10
13 6

4
8
11 1
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

COOLING LINE(1 1/4", 12V) ASSLY
FOR KFP6R-UF25(6R1080TA)
1 6H.1156.30.0.PR 1
ENGINES S/F FLOW SWITCH FOR
FIRE FIGHTING APPLICATION
RAW WATER FLOW SENSOR WITH
2 6H.902.23.0.PR SWITCH FM/UL ENGINE 6R1080TA 1
12V
BRACKET FOR COOLING LINE
3 4H.1438.07.0.PR 2
MTG.FOR 4R ENGINES
4 50.003.10.030 SET SCREW - M10X1.5X30 - 8.8 4
5 50.006.10.000 NUT - M10X1.5 - GR.8 4
6 50.506.10.000 PLAIN MACHINED WASHER - M10 8
BRACKET FOR COOLING LINE
7 F6.1106.04.0.PR 1
HOSE SUPPORT
8 03.299.07.0.PR U CLAMP 1
9 50.506.06.000 PLAIN MACHINED WASHER - M6 2
10 50.006.06.000 NUT - M6X1 - GR.8 2
U CLAMP FOR STOP SOLENOID
11 4H.956.41.0.00 1
ASSEMBLY (BIOGAS)

15
TITLE : - COOLING LINE(1 1/4") WITH FLOW
GROUP : - 6H.1156.1
SWITCH FOR 6R1080TA ENGINE

6
4
3 5
2 13
7
10 12
9
12

9
5 10
13 6

4
8
11 1
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

12 50.006.08.000 NUT- M8X1.25 - GR.8 4
13 50.506.08.000 PLAIN MACHINED WASHER - M8 4

16
TITLE: - COVER FOR FUEL PUMP BORE GROUP: - 4H.373

1 2
5
3

5
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.373.01.0.00 COVER FOR FUEL PUMP BORE 1
2 4H.373.02.0.00 ORING FOR FUEL PUMP COVER 1
3 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 1
4 50.002.08.035. SET BOLT - M8X1.25X35 - 8.8 3
5 50.506.08.000. PLAIN MACHINED WASHER - M8 4

17
TITLE: - CRANK CASE SF P2 TYPE THRUST
GROUP: - 6H.233
WASHER MTG.

36 6 28
15 29 35
31
16 34 47 48
33 20

17 32
21
27 18 24
23
19
26 22

37 45
42
46
38
39 14 9
13 43
10 25
7 12 11
8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
MONOBLOCK CRANK CASE OF SR. NO.-
*1 6H.233.10.0.00 1
WITHOUT BEARING 2, 26 TO
30,35,36
CONSISTING
MONOBLOCK CRANK CASE &
*2 6H.233.20.0.00 1 OF SR. NO.-
BEARING CAP ASSLY. 3 & 24 , 25
CONSISTING
MONOBLOCK CRANK CASE WITH
*3 6H.233.30.0.00 1 OF SR. NO.-
SEALING CAP 4, 18 TO 23
CONSISTING
MONOBLOCK CRANK CASE SUB
*4 6H.233.40.0.00 1 OF SR. NO.-
ASSLY. 5 & 7 TO 17
CRANK CASE SF P2 TYPE THRUST CONSISTING
*5 6H.233.01.0.00 1
WASHER OF SR. NO.- 6
NOT SUPPLIED
LOOSE
6 6H.001.25.0.00 MONOBLOCK CRANKCASE 1 CONSISTING
OF SR. NO.
7 TO 17

18
TITLE: - CRANK CASE SF P2 TYPE THRUST
GROUP: - 6H.233
WASHER MTG.

36 6 28
15 29 35
31
16 34 47 48
33 20

17 32
21
27 18 24
23
19
26 22

37 45
42
46
38
39 14 9
13 43
10 25
7 12 11
8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CRANK SHAFT PLUG -
7 34.003.07.0.00 2
ALUMINIUM
8 34.003.08.0.00 WASHER FOR ALU.PLUG. 2
MAIN BEARING CAP (FLYWHEEL NOT SUPPLIED
9 6H.001.06.0.00 1
END) LOOSE
NOT SUPPLIED
10 6H.001.08.0.00 MAIN BEARING CAP 5 LOOSE
NOT SUPPLIED
11 6H.001.07.0.00 MAIN BEARING CAP (FINISH) G.E. 1 LOOSE
BOLT FOR MB CAP(HEX HEAD)
12 03.001.22.0.00 14
M14X2X128
13 02.001.04.0.00 SPECIAL WASHER FOR M14 BOLT 14
14 B2.005.16.0.00 HOLLOW DOWEL(M.B.CAP) 14
15 F6.007.34.0.00 SEALING CAP 4
16 F6.001.58.0.00 SEALING CAP.(40 DIN 443) 3
17 4H.001.05.0.00 SEALING CAP 4
18 50.610.12.000. CORE PLUG 1
19 50.508.10.000. COPPER WASHER (12X18) 1
20 04.001.08.0.00 PRECOATED SCREW PLUG 2

19
TITLE: - CRANK CASE SF P2 TYPE THRUST
GROUP: - 6H.233
WASHER MTG.

36 6 28
15 29 35
31
16 34 47 48
33 20

17 32
21
27 18 24
23
19
26 22

37 45
42
46
38
39 14 9
13 43
10 25
7 12 11
8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

21 50.508.18.000. COPPER WASHER (20X24) 2
22 03.001.06.0.00 SCREW PLUG 2
23 50.508.14.000. COPPER WASHER (16X22) 2
24 02.037.04.0.00 DIPSTICK GUIDE 1
25 02.002.04.0.00 STEEL BALL 1
26 03.001.04.0.00 CAM BUSH 1
27 02.001.13.0.00 DISC PLUG 1
28 50.508.12.000. COPPER WASHER (14X20) 1
PISTON COOLING NOZZLE
29 6H.426.10.0.00 ASSEMBLY (FOR 6K1080TA 6
ENGINE)
SUB. ASSEMBLY OF SPECIAL CONSISTING
*30 4H.156.07.0.00 BANJO BOLT(FOR OIL SPRAY 6 OF SR. NO. 31
NOZZLE.) TO 34
NOT SUPPLIED
31 4H.156.05.0.00 BANJO BOLT 1 LOOSE
CLOSING BUTTON (FOR OIL NOT SUPPLIED
32 4H.156.06.0.00 1 LOOSE
SPRAY BANJO BOLT)

20
TITLE: - CRANK CASE SF P2 TYPE THRUST
GROUP: - 6H.233
WASHER MTG.

36 6 28
15 29 35
31
16 34 47 48
33 20

17 32
21
27 18 24
23
19
26 22

37 45
42
46
38
39 14 9
13 43
10 25
7 12 11
8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

NOT SUPPLIED
33 02.002.02.0.00 SPRING 1
LOOSE
NOT SUPPLIED
34 02.002.04.0.00 STEEL BALL 1
LOOSE
ADAPTER FOR LUB OIL TEMP.
35 6H.001.21.0.00 1
SWITCH
CORE PLUG-HEXAGONAL SOCKET
36 50.610.14.000. 5
HEAD(DIN-908)
NOT SUPPLIED
37 6H.001.18.0.00 MAIN BEARING (TOP) 7 LOOSE
NOT SUPPLIED
38 6H.001.19.0.00 MAIN BEARING (BOTTOM) 6 LOOSE
MAIN BEARING (BOTTOM- GEAR NOT SUPPLIED
39 6H.001.02.0.00 1
END) LOOSE
THRUST WASHER SET OF INNER & CONSISTING
*40 6H.001.05.0.00 1
OUTER PAIRS OF SR. NO. 41
CONSISTING
*41 6H.001.03.0.00 THRUST WASHER PAIR(INNER) 1 OF SR. NO.
42,43

21
TITLE: - CRANK CASE SF P2 TYPE THRUST
GROUP: - 6H.233
WASHER MTG.

36 6 28
15 29 35
31
16 34 47 48
33 20

17 32
21
27 18 24
23
19
26 22

37 45
42
46
38
39 14 9
13 43
10 25
7 12 11
8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

THRUST WASHER (INNER) TOP
42 6H.001.09.0.00 1
SIDE
THRUST WASHER (INNER)
43 6H.001.11.0.00 1
BOTTOM SIDE
CONSISTING
*44 6H.001.04.0.00 THRUST WASHER PAIR (OUTER) 1 OF SR. NO.
45,46
THRUST WASHER(OUTER) TOP
45 6H.001.12.0.00 1
SIDE
THRUST WASHER(OUTER)
46 6H.001.13.0.00 1
BOTTOM SIDE
47 50.401.08.014. DOWEL 2
48 50.540.09.016. SPRING DOWEL PIN 2

22
TITLE:- CRANK PULLEY 2GR,SPA,WITH
GROUP:- 6H.338
VISCUSS DAMPER W/O EXT PULLEY

4
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
ASSLY. OF CRANK PULLEY &
*1 6H.228.10.0.00 1 OF SR. NO.
DAMPER 2 TO 5
CRANK PULLEY SF VISCOUS
2 6H.228.01.0.00 1
DAMPER SPA 2 GROOVE 172 PCD
3 6H.186.01.0.00 DAMPER FOR URAL 375D 6R1040 1
4 50.002.12.030. SET BOLT - M12X1.75X30 - 8.8 6
5 02.005.04.0.00 WASHER 6
6 03.016.02.0.00 CRANK PULLY BOLT-UPDATED 1
WASHER (FOR CRANK PULLY
7 03.016.03.0.00 1
BOLT) - UPDATED

23
TITLE: - CRANK SHAFT (FMUL) GROUP: - 6H.002.2

6 10
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
CRANK SHAFT ASSLY WITH
*1 6H.002.20.0.00 1 OF SR. NO.
BALANCE WEIGHT & GEAR 2, 3 & 9, 10
NOT SUPPLIED
2 P2.020.09.0.00 DEFLECTOR FOR OIL SEAL 1 LOOSE
CONSISTING OF
CRANKSHAFT ASSLY (WITH SR. NO. 4 TO 8
*3 6H.002.10.0.00 1 NOT SUPPLIED
BALANCE WEIGHT)
LOOSE
NOT SUPPLIED
4 6H.002.02.0.00 CRANKSHAFT (SINGLE OIL HOLE) 1
LOOSE
NOT SUPPLIED
5 04.005.11.0.00 BALANCE WEIGHT 6
LOOSE
SOCKET HEAD BOLT -
6 04.005.12.0.00 12
M12X1.75X60 -10.9
HARD WASHER ( 13 I.D X 21O.D X
7 02.005.04.0.00 12
1.5 TH )
8 50.401.08.025. DOWEL PIN 8X25 1
NOT SUPPLIED
9 4H.002.01.0.00 CRANK SHAFT GEAR (FINISH/) 1 LOOSE

24
TITLE: - CRANK SHAFT (FMUL) GROUP: - 6H.002.2

6 10
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

10 50.401.08.065. DOWEL PIN 8X65 1

25
TITLE: - CYLINDER HEAD (P-TYPE) GROUP: - 6H.147

20
19
32 18
22 23
28 17 10
27 24 11
6
21 3
29
7
16
30
31
25
26

13 15
12
9
33 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 6H.147.20.0.00 CYL. HEAD ASSEMBLY (P TYPE) 1 OF SR. NO. 2 &
15 TO 26
CONSISTING
CYL. HEAD WITH VALVE GUIDE
*2 6H.147.30.0.00 1 OF SR. NO. 3, 4
AND INSERTS (P TYPE) & 8 TO 13,
CYLINDER HEAD FOR NOT SUPPLIED
3 6H.147.01.0.00 1
6R1080 ENGINE (FOR STAGE III) LOOSE
ASSEMBLY OF SEMIFINISH VALVE CONSISTING
*4 4H.007.39.0.00 12
GUIDE & WIRE SNAP RING OF SR. NO.5
ASSEMBLY OF SEMIFINISH VALVE CONSISTING
*5 4H.007.38.0.00 1
GUIDE & SNAP RING OF SR. NO.6, 7
6 4H.007.02.9.00 VALVE GUIDE ( SEMI-FINISH) 1
7 02.022.18.0.00 WIRE SNAP RING 1
VALVE SEAT INSERT (INLET)
8 4H.1432.02.9.00 6
SEMIFINISH
VALVE SEAT INSERT (EXHAUST)
9 4H.1432.03.9.00 6
SEMI-FINISH
CORE PLUG-HEXAGONAL SOCKET
10 50.610.16.000. 1
HEAD(DIN-908)

26
TITLE: - CYLINDER HEAD (P-TYPE) GROUP: - 6H.147

20
19
32 18
22 23
28 17 10
27 24 11
6
21 3
29
7
16
30
31
25
26

13 15
12
9
33 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

11 50.508.16.000. COPPER WASHER (18X22) 1
12 50.610.24.000. CORE PLUG 5
13 50.508.29.000. COPPER WASHER (26X32) 5
CONSISTING
*14 4H.1432.41.0.00 INLET & EXHAUST VALVE PAIR 1 OF SR. NO.
15, 16
15 4H.1432.04.0.00 INLET VALVE 6
16 4H.1432.05.0.00 EXHAUST VALVE 6
17 34.013.13.0.00 CUP FOR VALVE SPRING. 12
18 02.022.13.0.00 VALVE SPRING 12
19 02.022.11.0.00 VALVE CUP 12
20 02.022.28.0.00 VALVE COLLET(3-GROOVE) 12
21 50.010.10.050. STUD - M10X1.5X50 - 8.8 6
22 50.006.10.000. NUT - M10X1.5 - GR.8.8 12
23 50.010.10.075. STUD - M10X1.5X75 - 8.8 6
24 02.022.06.0.00 WASHER 6
GASKET (FOR CYL.HEAD)-
25 6H.007.06.0.00 1
1.22 MM THK.

27
TITLE: - CYLINDER HEAD (P-TYPE) GROUP: - 6H.147

20
19
32 18
22 23
28 17 10
27 24 11
6
21 3
29
7
16
30
31
25
26

13 15
12
9
33 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

GASKET (FOR CYL.HEAD)-
26 6H.007.07.0.00 1
1.1 MM THK.
27 50.506.10.000. PLAIN MACHINED WASHER - M10 12
28 50.010.10.070. STUD - M10X1.5X70 - 8.8 6
29 50.010.10.050. STUD - M10X1.5X50 - 8.8 6
30 F6.001.58.0.00 SEALING CAP.(40 DIN 443) 5
31 4H.007.07.0.00 BOLT FOR CYLINDER HEAD. 26
32 50.006.10.000. NUT - M10X1.5 - GR.8.8 12
PLASTIC CAP FOR VALVE GUIDE
33 4H.007.37.0.00 12
PROTECTION

28
TITLE: -CYLINDER LINER. (105 DIA) GROUP: - 2H.008

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CYLINDER LINER (105mm DIA.)A-
1 2H.008.01.0.00 1
GROUP
2 2H.008.07.0.00 O RING (FOR CYL.LINER) 2
O RING FOR CYLINDER LINER
3 2H.008.11.0.00 1
(VITON MATERIAL)

29
TITLE:- DELIVERY BODY GROUP:- 2H.013…EXP

3
5

8
4
7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
DELIVERY BODY AND JOINT (NON
*1 2H.013.20.0.00 1 OF SR. NO. 2 &
ASBESTOS) 6
CONSISTING
*2 2H.013.10.0.00 DELIVERY BODY ASSEMBLY 1 OF SR. NO. 3
TO 5
3 2H.013.01.0.00 DELIVERY BODY (FINISH) 1
4 2H.014.01.0.00 DELIVERY TUBE 1
5 2H.014.02.0.00 O RING(FOR DELIVERY TUBE) 2
6 2H.013.11.0.00 JOINT FOR DELIVERY BODY 1
7 50.002.08.045. SET BOLT - M8X1.25X45 - 8.8 3
8 50.506.08.000. PLAIN MACHINED WASHER - M8 3

30
TITLE: - DIP STICK (20DEG INCL SHORT) GROUP: - 06.248

.00
0.0
8.1
.24
06

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 06.248.10.0.00 DIPSTICK ASSLY 1
O RING - DIPSTICK
2 03.036.01.0.00 1
(2X5, 21515 OR 21511)

31
TITLE: - ELECTRONIC GOVERNOR
SET (ACTUATOR-ADC225 D1S-12V &
GROUP: - 4H.1475.2
CARD-ESD 5119) & LINKAGE ASSLY.
FOR F.F. APPLN.

4
2

14
15 5
8

7
15 11
13

12
9

10
7 14
15
16

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ELECTRONIC GOVERNOR CONSISTING
*1 4H.1475.10.0.00 SET(ACTUATOR-ADC225 D1S-12V 1 OF SR. NO.
& CARD-ESD 5119) FOR F.F. APPLN. 2 TO 5
ACTUATOR(ADC225 D1S-12V) FOR
2 4H.1475.03.0.00 1
FIRE FIGHTING APPLN.
GOVERNOR CARD(ESD 5160) FOR NOT
*3 4H.1475.04.0.00 1
FIRE FIGHTING APPLN. ILLUSTRATED
4 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 2
5 50.506.08.000. PLAIN MACHINED WASHER - M8 2
CONSISTING
LINKAGE ASSLY FOR
*6 F6.483.20.0.00 1 OF SR. NO.
ELECTRONIC GOVERNOR 7 TO 15
7 29.224.28.0.00 R.E.BEARING M6 RH THREADS 2
8 4H.1475.06.0.00 ADAPTOR (M6 X 1) 1
SPACER FOR LINK
9 F6.483.04.0.00 1
(M6 X1 LH - M6X1 RH)
10 4H.1475.07.0.00 LINK(M6X1 LH - M6X1 RH) 1

32
TITLE: - ELECTRONIC GOVERNOR
SET (ACTUATOR-ADC225 D1S-12V &
GROUP: - 4H.1475.2
CARD-ESD 5119) & LINKAGE ASSLY.
FOR F.F. APPLN.

4
2

14
15 5
8

7
15 11
13

12
9

10
7 14
15
16

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

11 4H.472.03.0.00 NUT M6 X 1 LH THREADS 1
12 F6.483.05.0.00 LINK (M6X1) 1
13 50.003.06.020. SET SCREW - M6X1X20 - 8.8 1
14 50.006.06.000. NUT - M6X1 - GR.8.8 6
15 50.506.06.000. PLAIN MACHINED WASHER - M6 7
16 50.003.06.050 SET SCREW - M6X1X50 - 8.8 1
SPACER FOR BATTERY CLAMPING
NOT
17 4H.450.06.0.00 (I.D. 7 & O.D. 12 & LENGTH 20 FOR 1 ILLUSTRATED
SHANTI PROJ.)

33
TITLE: - ENGINE MOUNTING FOOT GROUP: - 6H.033.2

4
3 3
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ENGINE MOUNTING FOOT (G.E.)
1 6H.033.03.0.00 2
FOR F.F. APPLICATION
ENGINE MOUNTING FOOT (F.W.E.)
2 6H.033.04.0.00 2
FOR F.F. APPLICATION
3 50.002.14.045. SET BOLT - M14X2X45 - 8.8 16
4 50.505.14.000. SPRING WASHER - M14 16

34
TITLE: - ENGINE NAME PLATE WITH FUEL
GROUP: - 4H.1440
DATA

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

NAME PLATE FOR ENGINE WITH
1 4H.1440.01.0.00 1
FUEL DATA (FM/UL)
2 4H.1440.02.0.00 BRACKET FOR NAME PLATE 1
3 50.076.10.020. ALLEN SCREW 1
4 50.506.08.000. PLAIN MACHINED WASHER - M8 1
P K DRIVE SCREW 1/8"X3/8"
5 10.046.02.0.00 4
(RIVET)

35
TITLE: - EXHAUST GAS OUTLET
GROUP: - 6H.1149
(S/F K27 TURBO)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.1149.02.0.00 EXHAUST BEND (FOR K27 TURBO) 1

36
TITLE: - EXHAUST MANIFOLD
GROUP: - 6H.143
(6RT, V.S. K27 TURBO)

7 8
9
5
6

2 8

3
4 2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

EXHAUST MANIFOLD (CENTRAL
1 6H.143.02.0.00 1
PIECE, TO SUIT K27 TURBO)
2 6H.011.04.0.00 EXHAUST MANIFOLD (SIDE PIECE) 2
3 4H.107.02.0.00 SPACER(FOR EXT.MANIFOLD) 12
SOCKET HEAD SCREW -
4 50.011.08.075. 12
M8X1.25X75 - 8.8
S.S. JOINT FOR EXHAUST
5 P2.106.01.0.00 6
MANIFOLD
6 50.010.10.025. STUD - M10X1.5X25 - 8.8 4
STAINLESS STEEL
7 50.080.10.000. 4
NUT M10-AISI-304
8 F6.168.02.0.00 R RINGS(DIN 70910-65X2.5) 6
9 50.506.10.000. PLAIN MACHINED WASHER - M10 4

37
TITLE: - EXHAUST SILENCER INDUSTRIAL
GROUP: - 6H.1126
TYPE FOR F.F. ENGINES

3
2

4
7 6 5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

EXHAUST SILENCER(5",
INDUSTRIAL TYPE) FOR 6R1080TA
1 6H.1126.03.0.00 1
ENGINES FOR FIRE FIGHTING
APPLICATION
FLANGE(5" I.D. & 219 MM PCD) AT
2 6H.1126.05.0.PR 2
SILENCER SIDE
JOINT 219 PCD 8 HOLES FOR
3 KV0.509.02.0.00 2
NELSON SILENSER KV0.509.01.0.00.
4 50.003.20.040. SET SCREW - M20X2.5X40 - 8.8 16
5 50.006.20.000. NUT - M20X2.5 - GR.8 16
6 50.506.20.000. PLAIN MACHINED WASHER - M20 32
FLANGE(5" I.D. & 165 MM PCD) AT
7 6H.1126.06.0.PR 1
BELLOW SIDE

38
TITLE: - EXPANSION BELLOW
GROUP: - F6.550
(4") AND MOUNTING

2
3

5 1

3
5

4 5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

EXPANSION BELLOW 4"
1 F6.550.01.0.00 1
(WITH 4 MTG. HOLE)
2 F6.503.02.0.00 S.S.JOINT(4") 2
3 50.003.14.040. SET SCREW - M14X2X40 - 8.8 8
4 50.006.14.000. NUT - M14X2 - GR.8.8 8
5 50.506.14.000. PLAIN MACHINED WASHER - M14 16

39
TITLE: - FASTENER FOR WATER PUMP
PULLEY MOUNTING (FOR HE GROUP: - 6H.104.1
COOLED FOR F.F. APPLICATION)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 4
2 50.506.08.000. PLAIN MACHINED WASHER - M8 4

40
TITLE: - FIP FOR 6RTA FIRE FIGHTING
GROUP: - 6H.1134
APPLICATION

3
9
4

5
8

7
6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

Motorpal Pump for 6R1080 TA Engine -
1 6H.1134.01.0.00 1
SPP firefighting pump application
JOINT FOR FUEL PUMP (NON
2 34.016.12.0.00 1
ASBESTOS)
HUB ( FOR MOTORPAL FIP
3 6H.652.02.0.00 1
FITMENT)
FIP GEAR (FOR MOTORPAL PUMP
4 6H.652.01.0.00 1
AND ROTARY PUMP)
OIL CONNECTION FLEXIBLE
5 6H.1134.03.0.00 1
PIPE(CRANKCASE TO FUEL PUMP)
6 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 3
7 34.017.05.0.00 WASHER FOR FUEL PUMP GEAR. 3
8 50.504.04.000. BANJO BOLT - M14X1.5 5
9 50.508.11.000. COPPER WASHER (14X18) 10

41
TITLE: - FLYWHEEL HOUSING (SAE3-144.5) GROUP: - 4H.038

5 14
2
15 1

7
8
6
4
12 3
13

11
10

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.038.01.0.00 FLYWHEEL HOUSING (SAE3 -144.5) 1
2 4H.001.13.0.00 HOLLOW DOWEL (16 DIA) 2
3 50.052.10.030. SET BOLT-M10X30-10.9 10
4 02.024.09.0.00 WASHER 10
5 4H.038.02.0.00 FLANGE FOR STARTER. 1
BLANKING PLATE (FOR
6 4H.038.04.0.00 1
FLYWHEEL HOUSING)
7 50.003.06.012 SET SCREW - M6X1X12 - 8.8 2
8 50.506.06.000 PLAIN MACHINED WASHER - M6 2
9 03.086.02.0.00 COVER FOR FLY WHEEL HSG 1
10 50.003.08.016 SET SCREW - M8X1.25X16 - 8.8 4
11 50.506.08.000 PLAIN MACHINED WASHER - M8 4
12 50.602.16.000 CORE PLUG 16X1.5 1
13 50.508.15.000 COPPER WASHER (17X23) 1
14 F6.016.12.0.00 RUBBER CAP. 1
15 4H.038.05.0.00 SHIPPING PLUG 1

42
TITLE: - FLYWHEEL(C-110 PTO & SP-111 PTO) GROUP: - 04.039

4
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 03.050.02.0.00 FLYWHEEL BOLT (M10X50) 10
CONSISTING
*2 04.039.10.0.00 FLYWHEEL ASSLY 1 OF SR.NO. 3,4
FLYWHEEL
3 04.039.01.0.00 1
(C-110 PTO & SP-111 PTO)
STARTER RING 121 TEETH, 3.175
4 03.035.02.0.00 1
MODULE
5 50.505.10.000. SPRING WASHER - M10 8

43
TITLE: -FRONT COVER S/F VISCOUS DAMPER GROUP: - 6H.357.3

4 4 2
3 7

11
10
4
6

4
4
3
5
12 8 1
4
14
4
13

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.358.11.0.00 FRONT COVER (4CX-EJCB) 1
2 4H.358.04.0.00 JOINT FOR FRONT COVER ( TS 9013 ) 1
3 50.002.08.080 SET BOLT - M8X1.25X80 - 8.8 4
4 50.506.08.000 PLAIN MACHINED WASHER - M8 18
5 50.002.08.030 SET BOLT - M8X1.25X30 - 8.8 4
6 50.003.08.025 SET SCREW - M8X1.25X25 - 8.8 5
7 50.003.08.035 SET SCREW - M8X1.25X35 - 8.8 5
8 4H.358.06.0.00 GEAR END OIL SEAL (80X105X12) 1
TIMING POINTER (S/F 6R 1080
9 6H.357.02.0.00 WITH DOUBLE GR. CRANK 1
PULLEY)
10 50.003.06.012 SET SCREW - M6X1X12 - 8.8 2
11 50.506.06.000 PLAIN MACHINED WASHER - M6 2
12 06.158.01.0.00 SPACER(9X20X9THICK) 1
13 50.003.08.045 SET SCREW - M8X1.25X45 - 8.8 1
14 50.003.08.040 SET SCREW - M8X1.25X40 - 8.8 1

44
TITLE: - FUEL STOP SOLENOID (ELECTRAL
CONTROL MAKE, INDIGENIOUS,
ENERGIZE TO STOP TYPE, 12VDC)
GROUP: - 4H.1357.5
WITH SUITABLE LINKAGE &
HARDWARE FOR FIRE FIGHTING
APPLICATION

4
5
8

2
7

4 5
3
5
6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

FUEL STOP SOLENOID ASSEMBLY
S/F 4RTA & 6RTA ENGINE
(ELECTRAL CONTROL
1 4H.1357.05.0.00 MAKE,INDIGENIOUS, ENERGIZE 1
TO STOP TYPE, 12VDC) WITH
SUITABLE LINKAGE &
HARDWARE
2 4H.1357.03.0.00 BRACKET(FOR STOP SOLENOID) 1
3 50.003.06.020. SET SCREW - M6X1X20 - 8.8 2
4 50.006.06.000. NUT - M6X1 - GR.8.8 3
5 50.506.06.000. PLAIN MACHINED WASHER - M6 6
6 50.003.06.025. SET SCREW - M6X1X25 - 8.8 1
7 02.118.01.0.00 LEVER FOR ENGINE STOPPING 1
8 03.023.02.0.00 SPL. PLAIN WASHER - M6 2

45
TITLE: - FUEL SUPPLY & LEAK-OFF SYSTEM GROUP: - 6H.1154.1

8
6
7
1

9
5 5
10
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.1375.03.0.00 FUEL SUPPLY AND RETUN BLOCK 1
FUEL LEAK OFF PIPE ASSEMBLY
2 6H.1154.30.0.PR 1
FOR 6R1080TA ENGINE
3 50.007.16.000. NUT - M16X1.5 - GR.8 2
ADAPTOR FOR FUEL SUPPLY AND
4 F6.418.04.0.00 2
RETURN BLOCK
5 50.506.16.000. PLAIN MACHINED WASHER - M16 2
FUEL SUPPLY PIPE (FROM SUPPLY
6 6H.1154.02.0.00 1
BLOCK TO FUEL PUMP)
7 50.504.04.000. BANJO BOLT - M14X1.5 1
8 50.508.12.000. COPPER WASHER (14X20) 2
EXTENSION PIPE FOR FUEL
9 4H.1375.06.0.PR 1
SUPPLY
EXTENSION PIPE FOR FUEL
10 4H.1375.07.0.PR 1
RETURN
11 50.002.08.040 SET BOLT - M8X1.25X40 - 8.8 1
12 50.002.08.045 SET BOLT - M8X1.25X45 - 8.8 1

46
TITLE: - GEAR CASING ( FOR FMUL ENGINE ) GROUP: - 6H.311.2

2
3

5
4

10

1
9
7
6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

GEAR CASING ( FOR FMUL
1 6H.311.04.0.00 1
ENGINE )
2 6H.225.02.0.00 JOINT FOR GEAR CASING 1
PRECOATED STUD (FOR FUEL
3 03.001.12.0.00 4
PUMP MOUNTING)
4 03.001.25.0.00 WASHER(FOR FUEL PUMP MTG) 4
5 50.006.10.000. NUT - M10X1.5 - GR.8.8 4
6 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 8
7 50.506.08.000. PLAIN MACHINED WASHER - M8 14
8 34.001.23.0.00 DOWEL FOR GEAR CASING 2
9 50.002.08.065. SET BOLT - M8X1.25X65 - 8.8 2
10 50.002.08.080. SET BOLT - M8X1.25X80 - 8.8 2

47
TITLE: - HEAT EXCHANGER FOR 6R1080TA F.F.
GROUP: - 6H.1145.2
ENGINES

15
23
14 1
13 24
5
4
20 7

10

9
16 6
18 7
10
19

10
17
22
21
5 12
11
3 2 5 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

HEAT EXCHANGER(S/F FRESH
1 F6.982.17.0.00 WATER) FOR 6RTA AND SL90TA 1
F.F. ENGINES
BRACKET FOR HEAT EXCHANGER
2 6H.1145.01.0.00 1
MTG
3 50.003.10.030 SET SCREW - M10X1.5X30 - 8.8 2
4 50.002.10.075 SET BOLT - M10X1.5X75 - 8.8 4
5 50.506.10.000 PLAIN MACHINED WASHER - M10 12
6 F6.982.11.0.00 JOINT FOR HEAT EXCHANGER 2
ADAPTOR WITH FLANGE FOR H.
7 F6.982.08.0.00 2
EXCHANGER
8 50.003.10.025 SET SCREW - M10X1.5X25 - 8.8 6
9 6H.1145.04.0.00 HOSE (THERMOSTAT TO HE) 1
10 4H.1712.24.0.00 HOSE T-BOLT CLAMP (DIA. 55-65) 4
11 4H.225.06.0.00 SPACER FOR BRACKET 1
HOSE (HEAT EXCHANGER TO
12 6H.1145.03.0.00 1
W.PUMP)

48
TITLE: - HEAT EXCHANGER FOR 6R1080TA F.F.
GROUP: - 6H.1145.2
ENGINES

15
23
14 1
13 24
5
4
20 7

10

9
16 6
18 7
10
19

10
17
22
21
5 12
11
3 2 5 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

ADAPTOR FOR VENT PIPE(M14X1.5
13 F6.982.14.0.00 1
TO 1/4")
FLEXIBLE PIPE VENT.CONN.TO
14 F6.557.09.0.00 1
MAKEUP W.TANK
ADAPTOR FOR FUEL INLET (BOTH
15 4H.486.01.0.00 1
END M14X1.5)
RECOVERY TANK WITH PIPE (FOR
16 4H.760.03.0.00 1
4RTA UPTO 200 KVA)
BRACKET FOR WATER RECOVERY
17 F6.982.21.0.PR 1
TANK MTG.
18 50.003.06.022 SET SCREW 2
19 50.506.06.000 PLAIN MACHINED WASHER - M6 4
20 50.006.06.000 NUT - M6X1 - GR.8 2
21 50.508.12.000 COPPER WASHER (14X20) 3
ADAPTOR FOR WATER TEMP.
22 4H.225.32.0.PR 1
SWITCH
HOSE (BETWEEN CAC PIPE AND
23 F6.982.12.0.00 1
H.E.)
24 F6.982.13.0.00 ADAPTOR ON HEAT EXCHANGER 2

49
TITLE: - HEAT SHIELD MOUNTING GROUP: - 6H.1153.1

4
3

7
6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
HEAT SHIELD ASSLY. FOR
*1 6H.1153.10.0.00 1 OF SR. NO.
6R1080TA F.F. APPLICATION 2 TO 7
HEAT SHIELD MTG. FRAME
2 6H.1153.01.0.00 1
(FLYWHEEL END SIDE)
HEAT SHIELD MTG. FRAME
3 6H.1153.02.0.00 1
(GEAR END SIDE)
HEAT SHIELD COVER
4 6H.1153.03.0.00 1
(FRONT SIDE)
HEAT SHIELD COVER
5 6H.1153.04.0.00 1
(ROCKER COVER SIDE)
6 50.003.08.016. SET SCREW - M8X1.25X16 - 8.8 12
7 50.506.08.000. PLAIN MACHINED WASHER - M8 12
8 50.002.10.025. SET BOLT - M10X1.5X25 - 8.8 2
9 50.506.10.000. PLAIN MACHINED WASHER - M10 2

50
TITLE: - HIGH PRESSURE PIPE (SPP) GROUP: - 6H.009.1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

H P PIPE COMPLETE SET 700 MM
1 6H.009.80.0.00 (1.8 - ST52)(Reference part number - 1
6H.009.70.0.00)
2 50.541.02.000. PIPE CLIP. (FOR 3 PIPES) 2
3 50.541.03.000. PIPE CLIP (FOR 4 PIPES) 2
4 02.036.03.0.00 RUBBER SLEEVE 14
5 50.003.06.012. SET SCREW - M6X1X12 - 8.8 4
6 50.006.06.000. NUT - M6X1 - GR.8 4

51
TITLE: INJECTOR & MOUNTING (SPP) GROUP: - 4H.1529

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

INJECTOR FOR 4K1080_125 KVA
1 4H.1529.02.0.00 1
(MICO NO : E 080 1607 00)

52
TITLE: - INLET MANIFOLD (ALUMINIUM) GROUP: - 6H.204.4

6
5

6
4 6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

AIR INLET MANIFOLD FOR FIRE
1 6H.204.02.0.00 1
FIGHTING APPLN.
2 3H.015.11.0.00 JOINT FOR AIR INLET MANIFOLD 2
3 50.002.08.120 SET BOLT - M8X1.25X120 - 8.8 9
4 50.003.08.100 SET BOLT - M8X1.25X100 - 8.8 2
5 50.002.08.085 SET BOLT - M8X1.25X85 - 8.8 1
6 50.506.08.000. PLAIN MACHINED WASHER - M8 12

53
TITLE: - INSTRUMENTAL PANEL WITH
STANDARD REVISION (INDIGENOUS
GROUP: - 6H.1147.4
DEVELOPED, FM/UL TYPE) 12V FOR
FIRE FIGHTING APPLN

6
5

2
26
7

8 27

9
29
10 5 28

30
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

INSTRUMENTAL PANEL
CONSISTING
ASSEMBLY(REVISED
*1 4H.1364.30.0.00 1 OF SR. NO.
SRTANDARD,FM/UL TYPE) 12V 2 TO 25
FOR FIRE FIGHTING APPLICATION
CONTROL PANEL FABRICATED
BOX WITH POWDERCOATING S/F
2 6H.1147.03.0.00 1
FIRE FIGHTING(FM/UL) REVISED
STANDARD
CONTROL WIRING CIRCUIT
DIAGRAM FOR FIREFIGHTING NOT
*3 4H.1364.22.0.00 1
PANEL 12VDC(FM/UL) REVISED ILUSTRATED
STANDARD
ANTI VIBRATION MOUNTING FOR
4 3H.880.02.0.00 CONTROL PANEL TS STANDARD 6
MAKE (20 MM HEIGHT).
5 50.006.08.000. NUT- M8X1.25 - GR.8.8 14
6 50.506.08.000. PLAIN MACHINED WASHER - M8 14

54
TITLE: - INSTRUMENTAL PANEL WITH
STANDARD REVISION (INDIGENOUS
GROUP: - 6H.1147.4
DEVELOPED, FM/UL TYPE) 12V FOR
FIRE FIGHTING APPLN

6
5

2
26
7

8 27

9
29
10 5 28

30
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

DIGITAL RPM METER WITH
HOURMETER(SUPPLY VOLTAGE 8
7 3H.130.05.0.00 TO 32 DC V INDIGENIOUS 1
DEVELOPED) FOR FIRE FIGHTING
APPLICATION
8 46.065.02.0.00 ELEC.WT GAUGE 12 V VDO MAKE 1
ELECTRICAL LUB OIL PRESSURE
9 46.250.01.0.00 GAUGE 0-10BAR, 12 V D.C. VDO 1
MAKE
DC VOLT METER 8 T0 16 V 53 DIA
10 4H.865.06.0.00 2
VDO MAKE
RELAY CARD WITH 3 RELAY (FOR NOT
*11 02.472.25.0.00 1
START STOP) ILUSTRATED
RELAY BOARD (4 RELAY) UL
MAKE CONTACT RAITING 5 NOT
*12 4H.865.01.0.00 1
AMP.12 V DC 2C/O WITH OMRON ILUSTRATED
RELAY.

55
TITLE: - INSTRUMENTAL PANEL WITH
STANDARD REVISION (INDIGENOUS
GROUP: - 6H.1147.4
DEVELOPED, FM/UL TYPE) 12V FOR
FIRE FIGHTING APPLN

6
5

2
26
7

8 27

9
29
10 5 28

30
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

MCB 4A SP MERLINGERIN MAKE NOT
*13 3H.864.03.0.00 2
(C60H1P4AC) ILUSTRATED
INDICATION LAMP LED TYPE NOT
*14 4H.1364.07.0.00 1
12VDC 16MM DIA SUMO MAKE ILUSTRATED
TOGGLE SWITCH ON/OFF
10AMP.WITH RUBBERCAP NOT
*15 4H.1364.09.0.00 1
SWTRONIC MAKE MODEL ILUSTRATED
NO.T902A1-W122-G
TOGGLE SWITCH ON/OFF SPRING
RETURN TYPE 10AMP.WITH NOT
*16 4H.1364.11.0.00 3
RUBBER SEAL CAP SWTRONIC ILUSTRATED
MAKE T902D1-WN22-G
TERMINAL STRIP 16WAY NOT
*17 4H.1364.13.0.00 1
IMPORTED 30AMP. ILUSTRATED
16-PIN CONNECTOR ALLIED MAKE NOT
*18 6H.902.11.0.00 1
MS3102-36-14P (MALE TYPE) ILUSTRATED

56
TITLE: - INSTRUMENTAL PANEL WITH
STANDARD REVISION (INDIGENOUS
GROUP: - 6H.1147.4
DEVELOPED, FM/UL TYPE) 12V FOR
FIRE FIGHTING APPLN

6
5

2
26
7

8 27

9
29
10 5 28

30
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

14-PIN CONNECTOR ALLIED MAKE NOT
*19 6H.902.12.0.00 1
MS3102R-28-20P (MALE TYPE) ILUSTRATED
RECTIFIER DIODE BRIDGE 16AMP NOT
*20 4H.1364.12.0.00 4
HIND MAKE MODEL NO.HB37-02 ILUSTRATED
CONTROL PANEL OPERATING
INSTRUCTION PLATE PRINTED
WHITE BACKGROUND & BLACK NOT
*21 4H.1364.14.0.00 1
LETTER ILUSTRATED
1.6MMTHICK,ALLUMINIUM
SHEET.
DIODE MOUDLE FOR BATTERY
NOT
*22 4H.1364.15.0.00 CHARGING 150AMP,CRYDOM 1 ILUSTRATED
MAKES MODEL NO. F1892CAD400
HEAT SINK FOR BATTERY NOT
*23 4H.1364.16.0.00 1
CHARGING DIODE MODULE ILUSTRATED
THREE WAY TERMINAL BLOCK NOT
*24 4H.1364.17.0.00 1
100AMP,V-CON MAKE MTB100 ILUSTRATED

57
TITLE: - INSTRUMENTAL PANEL WITH
STANDARD REVISION (INDIGENOUS
GROUP: - 6H.1147.4
DEVELOPED, FM/UL TYPE) 12V FOR
FIRE FIGHTING APPLN

6
5

2
26
7

8 27

9
29
10 5 28

30
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

EARTHING CABLE (BRADED) 6MM
DIA. WITH SUITABLE LUG. ALT. NOT
*25 4H.872.03.0.00 1
TO BASE PLATE FOR 50 & 72 KVA ILUSTRATED
SAUDI PROJECT.350MM LENGTH
INSTRUMENT PANEL MOUNTING
26 6H.1147.01.0.00 1
BRACKET
27 04.028.02.0.00 SPACER (11X20X13.8L) 4
28 50.003.10.040. SET SCREW - M10X1.5X40 - 8.8 4
29 50.506.10.000. PLAIN MACHINED WASHER - M10 4

58
TITLE:- INTERMEDIATE GEAR & SUPPORT SF
GROUP:- 6H.267
AUTO TIMER 6R1080 SERIES

7 6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
ASSLY OF INTERMEDIATE GEAR &
*1 2H.038.10.0.00 1 OF SR. NO.
BUSH 2&3
NOT SUPPLIED
2 2H.038.03.0.00 INTERMEDIATE GEAR(FINISH) 1 LOOSE
BUSH FOR INTERMEDIATE
3 2H.004.02.9.00 1
GEAR(S/F)
INTERMEDIATE GEAR SUPPORT SF
4 6H.267.01.0.00 1
AUTO TIMER
5 2H.038.02.0.00 THRUST WASHER 1
RETAINING PLATE FOR INT. GEAR
6 6H.293.01.0.00 1
SUPPORT W/O/AUTOTIMER
7 50.002.08.070. SET BOLT - M8X1.25X70 - 8.8 3

59
TITLE: - LIFTING HOOK GROUP: - 6H.048.1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.048.01.0.00 LIFTING HOOK 2
2 50.002.10.030. SET BOLT - M10X1.5X30 - 8.8 2
3 50.506.10.000. PLAIN MACHINED WASHER - M10 2

60
TITLE: - LUB OIL COOLER AND FILTER
GROUP: - 6H.113...EXP
(FOR JACKET WATER HEATING)

4
3 15

9
10

5
17
14
11
19 8
7

17

16

13
12
6 18

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 6H.113.30.0.00 LUBE OIL COOLER ASSEMBLY 1 OF SR. NO.
2 & 11 TO 17
CONSISTING
*2 6H.113.20.0.00 HEADER AND COOLER ASSEMBLY 1 OF SR. NO.
3 TO 10
HEADER FOR LUB OIL COOLER
3 6H.113.01.0.00 AND FILTER ( S/F JACKET WATER 1
HEATER)
4 F6.358.01.0.00 PLATE TYPE LUB OIL COOLER 1
5 F6.036.11.0.00 JOINT FOR LUB OIL COOLER 1
6 50.011.10.040. CAP SCREW 4
7 3H.007.05.0.00 ADAPTOR FOR SPIN ON FILTER 2
8 50.056.08.000. HEADLESS PIPE PLUG 1"-11.5 NPTF 1
CORE PLUG HEXAGONAL
9 50.610.22.000. 1
SOCKET HEAD(M22x1.5)
10 50.508.23.000. COPPER WASHER (22X27) 1
11 6H.014.11.0.00 JOINT FOR HEADER 1

61
TITLE: - LUB OIL COOLER AND FILTER
GROUP: - 6H.113...EXP
(FOR JACKET WATER HEATING)

4
3 15

9
10

5
17
14
11
19 8
7

17

16

13
12
6 18

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

PRECOATED PLUG
12 34.001.35.0.00 1
(FOR OIL GALLERY)
13 50.508.08.000. COPPER WASHER (10X16) 1
14 50.002.08.060. SET BOLT - M8X1.25X60 - 8.8 2
15 50.002.08.090. SET BOLT - M8X1.25X90 - 8.8 4
16 50.002.08.110. SET BOLT - M8X1.25X110 - 8.8 8
17 50.506.08.000. PLAIN MACHINED WASHER - M8 14
SPIN ON FILTER FOR
18 06.436.01.0.00 2
LUBRICATING OIL
HEADLESS PIPE PLUG
19 50.056.07.000. 1
(NPTF 14-3/4")

62
TITLE: - LUB OIL PUMP GROUP: - 6H.047

13 26 27 22

12
24
11
23
14

27
10
25
5

8 18 20
6
9

7 16
19
17

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
LUB OIL PUMP ASSLY WITH
*1 6H.047.40.0.00 1 OF SR. NO.- 2,
INTERMEDIATE GEAR 19 TO 21 & 24
CONSISTING
*2 6H.047.30.0.00 LUB OIL PUMP ASSLY 1 OF SR. NO.- 3,
15 & 18
CONSISTING
LUB OIL PUMP ASSEMBLY
*3 6H.047.90.0.00 1 OF SR. NO.- 4,
(WITHOUT ROTORS) 7 TO 14
CONSISTING
SUBASSLY OF LUB OIL PUMP
*4 6H.047.20.0.00 1 OF SR. NO.-
BODY & BUSH 5 AND 6
LUB OIL PUMP BODY NOT SUPPLIED
5 6H.047.01.0.00 1
(MACHINING) LOOSE
NOT SUPPLIED
6 03.010.05.0.00 BUSH FOR L.O.PUMP BODY 1
LOOSE
COUNTER SUNK SOCKET HEAD
7 06.010.01.0.00 3
SCREW.
NOT SUPPLIED
8 06.010.02.0.00 COVER PLATE 1
LOOSE
9 03.010.11.0.00 O RING - L.O.PUMP (1.57X65,21508) 1

63
TITLE: - LUB OIL PUMP GROUP: - 6H.047

13 26 27 22

12
24
11
23
14

27
10
25
5

8 18 20
6
9

7 16
19
17

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

LUB.OIL PUMP DRIVING NOT SUPPLIED
10 3H.005.04.0.00 1
GEAR(FINISH) LOOSE
NOT SUPPLIED
11 03.010.13.0.00 RELIEF VALVE 1 LOOSE
NOT SUPPLIED
12 03.010.14.0.00 SPRING FOR RELIEF VALVE 1 LOOSE
NOT SUPPLIED
13 03.010.15.0.00 CUP FOR SPRING 1 LOOSE
14 50.036.07.010. SPLIT COTTER PIN - 1/8"X1-1/2" 1
CONSISTING
*15 6H.047.10.0.00 ROTOR SUBASSLY 1 OF SR. NO.-
16,17
NOT SUPPLIED
16 6H.047.02.0.00 SHAFT FOR INNER ROTOR 1
LOOSE
NOT SUPPLIED
17 6H.047.03.0.00 INNER ROTOR 1
LOOSE
NOT SUPPLIED
18 6H.047.04.0.00 OUTER ROTOR 1 LOOSE
SHAFT FOR LUB OIL PUMP NOT SUPPLIED
19 4H.372.01.0.00 1
(INTERMEDIATE GEAR) LOOSE

64
TITLE: - LUB OIL PUMP GROUP: - 6H.047

13 26 27 22

12
24
11
23
14

27
10
25
5

8 18 20
6
9

7 16
19
17

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

20 4H.372.02.0.00 HARD WASHER ( FOR INT. GEAR) 1
CONSISTING
SUB.ASSLY.OF L.O.PUMP
*21 3H.005.30.0.00 1 OF SR. NO.-
INT.GEAR AND BUSH. 22,23
INTERMEDIATE GEAR NOT SUPPLIED
22 3H.005.03.0.00 1
(FOR L.O.PUMP)(FINISH) LOOSE
23 34.014.12.0.00 BUSH FOR LEVER 1
24 02.024.38.0.00 WASHER(ROCKER LEVER) 1
25 50.002.08.075. SET BOLT – M8X1.25X75 – 8.8 1
26 50.002.08.035. SET BOLT – M8X1.25X35 – 8.8 2
27 50.506.08.000. PLAIN MACHINED WASHER – M8 3

65
TITLE :- LUB OIL SUMP (SHALLOW)
GROUP :- 6H.378
S.F.REDUCED WIDTH GEAR CASING

4
7
5
6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

LUB OIL SUMP ASSLY (SHALLOW) CONSISTING
*1 6H.378.10.0.00 S.F.REDUCED WIDTH GEAR 1 OF SR. NO.-
CASING 2&3
LUB OIL SUMP SHALLOW
2 6H.378.01.0.00 S.F.REDUCED WIDTH GEAR 1
CASING
CONSISTING
*3 2H.035.20.0.00 PLUG WITH MAGNET & 'O'RING. 2 OF SR. NO.-
4&5
4 2H.035.10.0.00 DRAIN PLUG ASSEMBLY. 1
5 F6.024.47.0.00 O – RING 1
6 50.003.08.030 SET SCREW - M8X1.25X30 - 8.8 27
7 10.020.03.0.00 HARD WASHER (F) 27

66
TITLE: - MOUNTING FOR FUEL FILTER
GROUP: - 6H.1146.1
(SPIN ON) & FUEL PIPES

8
4

9 5
6

7 3

9
10

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

MOUNTING BRACKET FOR SPIN
1 6H.1146.01.0.00 1
ON FILTER
2 50.003.08.015. SET SCREW - M8X1.25X15 - 8.8 4
3 50.506.08.000. PLAIN MACHINED WASHER - M8 4
4 50.003.12.040 SET SCREW - M12X1.75X40 - 8.8 2
5 50.506.12.000. PLAIN MACHINED WASHER - M12 2
FUEL PIPE (FROM FEED PUMP TO
6 6H.1146.04.0.PR 1
FUEL FILTER)
FUEL PIPE(FROM FUEL FILTER TO
7 6H.1146.05.0.PR 1
FUEL PUMP)
8 50.504.04.000. BANJO BOLT - M14X1.5 4
9 50.508.12.000. COPPER WASHER (14X20) 8
10 50.006.12.000 NUT - M12X1.75 - GR.8 2

67
TITLE: - OIL FILLING BODY (FMUL) GROUP: - 3H.042.1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 3H.042.04.0.00 OIL FILLING BODY (FMUL) 1
JOINT FOR OIL FILLING BODY PTL
2 3H.042.03.0.00 1
(ARMSTRONG TS13)
3 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 2
4 50.506.08.000. PLAIN MACHINED WASHER - M8 2
5 34.036.50.0.00 PERFORATED DISC. 1
6 34.036.60.0.00 CAP ASSLY 1

68
TITLE: - OIL SEAL HOUSING GROUP: - 6H.045.4

6
5

3
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

PLATE WITH RUBBER MOULDING
1 2H.039.10.0.00 1
(FOR FWE OIL SEAL HSG.)
SUB-ASSLY OF OIL SEAL HOUSING CONSISTING
*2 6H.045.30.0.00 1
F.W.E. OF SR. NO. 3, 4
3 6H.045.01.0.00 OIL SEAL HOUSING (FWE) FINISH 1
4 03.007.06.0.00 OIL SEAL(115X140X12) CR MAKE 1
5 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 10
6 50.506.08.000. PLAIN MACHINED WASHER - M8 10

69
TITLE: - PISTON AND CON ROD ASSEMBLY
GROUP: - 4H.180.1
(TURBO, P.G.40 DIA PIN)

13
12
7

8 16

14
9

3
15

4
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
OF SR. NO. 2,
*1 4H.180.50.0.00 PISTON & CON. ROD ASSLY. 1 10
NOT SUPPLIED
ASSEMBLY
CONSISTING
*2 4H.180.10.0.00 PISTON ASSEMBLY COMPLETE 1 OF SR. NO.
3 TO 6
PISTON - SUITABLE FOR 40 MM NOT SUPPLIED
3 4H.180.01.0.00 1
DIA.PIN LOOSE
4 4H.180.05.0.00 PISTON PIN - 40 MM DIA. 1
5 50.502.40.000. CIRCLIP INTERNAL - 40 MM 2
CONSISTING
*6 2H.009.30.0.00 PISTON RING SET(105 DIA.) 1 OF SR. NO. 7
TO 9
NOT SUPPLIED
7 2H.009.02.0.00 TOP RING (105 DIA) 1 LOOSE
NOT SUPPLIED
8 2H.009.03.0.00 COMPRESSION RING (105 DIA) 1 LOOSE
NOT SUPPLIED
9 2H.009.04.0.00 OIL CONTROL RING (105 DIA) 1 LOOSE

70
TITLE: - PISTON AND CON ROD ASSEMBLY
GROUP: - 4H.180.1
(TURBO, P.G.40 DIA PIN)

13
12
7

8 16

14
9

3
15

4
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
CONNECTING ROD ASSLY. (WITH
*10 04.692.20.0.00 1 OF SR. NO.
LE BEARING) 11, 16
CONSISTING
*11 04.692.10.0.00 CONNECTING ROD ASSEMBLY 1 OF SR. NO.
12 TO 15
12 4H.182.02.0.00 SMALL END BUSH (40 DIA) 1
NOT SUPPLIED
13 04.692.01.0.00 CONNECTING ROD 1
LOOSE
14 04.692.03.0.00 CONNECTING ROD BOLT 2
15 50.401.07.010. D0WEL PIN 2
CONNECTING ROD BIG END NOT SUPPLIED
16 04.692.02.0.00 2
BEARING(TA) LOOSE

71
TITLE:- PULLEY FOR WATER PUMP SPA
GROUP:- 4H.262
SECTION, 2 GR. (120 PCD)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

WATER PUMP PULLEY SPA - 2
1 4H.262.01.0.00 1
GR,120 PCD

72
TITLE: - PUSHROD AND TAPPETS GROUP: - 2H.007.3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 02.024.48.0.00 PUSH ROD (WELDED) 2
2 02.024.01.0.00 VALVE TAPPET 2

73
TITLE: - ROCKER COVER (ALUMINIUM) GROUP: - 6H.222...EXP

13

15
2 8
4
3

14
15

6
10 5
11 7

9
12

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 6H.222.10.0.00 ROCKER COVER ASSEMBLY 1 OF SR. NO. 2 &
12 TO 15
ROCKER COVER (ALLUMINIUM -
2 6H.222.01.0.00 1
SHANTI)
3 6H.024.10.0.PR ADAPTOR (FOR BREATHER PIPE) 1
4 6H.024.11.0.00 JOINT (ADAPTOR FOR BREATHER) 1
5 50.002.08.055. SET BOLT - M8X1.25X55 - 8.8 3
6 50.506.08.000. PLAIN MACHINED WASHER - M8 3
7 6H.013.05.0.00 DEFLECTOR PLATE 2
NOT SUPPLIED
8 6H.013.04.0.00 BREATHER TUBE 1 LOOSE
P K DRIVE SCREW 1/8"X3/8"
9 10.046.02.0.00 12
(RIVET)
BRACKET FOR BRETHER
10 6H.024.07.0.00 1
EXTENSION PIPE
COVER PLATE FOR ROCKER
11 6H.222.02.0.00 1
COVER
ROCKER COVER GASKET (RCS
12 6H.013.15.0.00 1
WITH HALF BEAD)

74
TITLE: - ROCKER COVER (ALUMINIUM) GROUP: - 6H.222...EXP

13

15
2 8
4
3

14
15

6
10 5
11 7

9
12

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

13 50.002.08.120. SET BOLT - M8X1.25X120 - 8.8 6
14 50.002.08.095. SET BOLT - M8X1.25X95 - 8.8 6
15 50.506.08.000. PLAIN MACHINED WASHER - M8 12

75
TITLE:- SPIN ON FUEL FILTER
GROUP:- 3H.132
(MICO NO F002 H20 116)

5
6
6 4
5

4
2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
SPIN ON FUEL FILTER (TWIN
*1 3H.132.10.0.00 1 OF SR. NO.
BOWL, 0.6 LIT.) 2 TO 4
2 3H.132.01.0.00 PRIMARY ELEMENT 1
3 3H.132.02.0.00 SECONDARY ELEMENT 1
4 3H.132.03.0.00 SEALING RING (FUEL FILTER) 2
5 50.504.04.000. BANJO BOLT - M14X1.5 2
6 50.508.12.000. COPPER WASHER (14X20) 4

76
TITLE: -STARTER SOLENOID (DUMORE)
GROUP: - 4H.1347
12V FOR F.F. ENGINES

2
1

5
4
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

STARTER SOLENOID (DUMORE)
1 4H.1347.01.0.00 2
12V FOR F.F. ENGINES
BRACKET FOR STARTER
2 4H.1347.04.0.00 SOLENOID AND ELECTRONIC 1
ACTUATOR MTG.
3 50.003.06.020. SET SCREW - M6X1X20 - 8.8 8
4 50.506.06.000. PLAIN MACHINED WASHER - M6 16
5 50.006.06.000. NUT - M6X1 - GR.8.8 8
6 50.003.10.020. SET SCREW - M10X1.5X20 - 8.8 4
7 50.506.10.000. PLAIN MACHINED WASHER - M10 4

77
TITLE: - STARTER MOTOR MICO MAKE 12V,
3KW, TYPE DE114X2012 V R (3KW) GROUP: - 6H.675
FOR 6R 1040

1
5

6
2
3
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

STARTER MICO MAKE 12V, 3KW ,
1 6H.675.01.0.00 1
TYPE-DE114X20 12V R (3KW)
2 50.003.10.030. SET SCREW - M10X1.5X30 - 8.8 3
3 50.505.10.000. SPRING WASHER - M10 3
4 50.506.10.000. PLAIN MACHINED WASHER - M10 3
5 24.083.01.0.00 RUBBER SLEEVE (20DIA) 1
6 22.118.01.0.00 RUBBER SLEEVE(12DIA) 1

78
TITLE: - STICKERS FOR 6R ENGINES (SPP) GROUP: - 6H.1143

2
1 3 4

5 6 7 8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.1497.01.0.00 STICKER(FOR ENGINE AIR FILTER) 2
STICKER(ENGINE COOLANT
2 6H.1143.02.0.00 1
HEATER, 2000W)
STICKER(FOR ENGINE ROTATING
3 4H.1497.03.0.00 2
PARTS)
4 4H.1497.04.0.00 STICKER(FOR SAFETY) 1
5 4H.1497.05.0.00 STICKER(FOR ENGINE LIFTING) 2
STICKER (FOR H.E. MAX.
6 4H.1497.06.0.00 1
WORKING PRESSURE)
STICKER(FOR ENGINE COOLANT
7 4H.1497.07.0.00 1
MIXTURE)
STICKER(FOR ENGINE
8 4H.1497.08.0.00 1
ALTERNATOR)
9 4H.1497.09.0.00 STICKER(FOR ENGINE FUEL LINE) 1

79
TITLE: - SUCTION TUBE GROUP: - 6H.006

11 8
10

10 3
7
9

13 12 6
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 6H.006.10.0.00 SUCTION TUBE ASSEMBLY. 1 OF SR.NO. 2,6
TO 11
CONSISTING
*2 6H.006.20.0.00 SUCTION TUBE SUB.ASSEMBLY. 1 OF SR.NO. 3 TO
5
3 6H.006.01.0.00 PIPE(FOR SUCTION TUBE) 1
4 04.011.03.0.00 STRAINER BASKET 1
5 06.008.05.0.00 FUNNEL 1
6 06.008.02.0.00 UNION SCREW 1
7 06.008.03.0.00 DOUBLE CONE RING 1
8 06.008.04.0.00 CLAMPING STRAP 2
9 50.003.06.012. SET SCREW - M6X1X12 - 8.8 2
10 50.506.06.000. PLAIN MACHINED WASHER - M6 4
11 50.006.06.000. NUT - M6X1 - GR.8 2
12 50.003.08.016. SET SCREW - M8X1.25X16 - 8.8 2
13 50.506.08.000. PLAIN MACHINED WASHER - M8 2

80
TITLE: -TEMPRATURE SWITCH & SENSORS
GROUP: -F6.906.1
FOR FM/UL ENGINE CE MARK

4
4
4

1 2 3
6 5 7 8

10

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

LOW ENGINE COOLANT
1 F6.906.70.0.PR 1
TEMPERATURE SWITCH
RAW WATER HIGH TEMPRATURE
2 F6.906.71.0.PR 1
SWITCH
ENGINE COOLANT TEMPRATURE
3 F6.906.72.0.PR 1
SWITCH
4 50.508.28.000 COPPER WASHER (24X32) 3
SENSOR UNIT (FOR ELEC TEMP
5 46.085.02.0.00 1
GAUGE)
6 50.508.11.000 COPPER WASHER (14X18) 1
LUBE OIL PRESSURE SENDOR,
(SENSOR + SWITCH), VDO
7 2H.092.11.0.00 SIEMENCE (INDIA), 2 TERMINAL, 1
BODY GROUND WITH IMPORTED
BOBBIN ASSEMBLY
RUBBER SLEEVE 38X10 FOR PR
8 46.252.02.0.00 1
GAUGE SENDOR
RUBBER SLEEVE FOR
9 3H.905.05.0.00 3
TEMP.SWITCH / SENSOR

81
TITLE: -TEMPRATURE SWITCH & SENSORS
GROUP: -F6.906.1
FOR FM/UL ENGINE CE MARK

4
4
4

1 2 3
6 5 7 8

10

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

MAGNETIC PICK_UP DUAL O/P
10 F6.741.14.0.PR 1
FOR CE MARK FM/UL

82
TITLE: - THERMOSTAT AND HOUSING
GROUP: - 4H.096…EXP
ASSEMBLY (USA)

3 6

11 7

10

11

2
12 5
9 13
8

14

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

THERMOSTAT AND HOUSING CONSISTING
OF SR. NO.
*1 4H.096.20.0.00 ASSEMBLY 1 3 TO 7 AND
(NON ASBESTOS JOINT) 10 TO 13
2 4H.053.01.0.00 THERMOSTAT HOUSING 1
THERMOSTAT ELEMENT (74 DEG) -
3 39.040.09.0.00 1
WTIL NO.DEV358
JOINT FOR THERMOSTAT COVER
4 4H.053.08.0.00 1
(METTALIC)
5 4H.096.03.0.00 THERMOSTAT COVER 1
6 50.003.08.025 SET SCREW - M8X1.25X25 - 8.8 4
7 50.506.08.000 PLAIN MACHINED WASHER - M8 4
8 50.602.14.000 PLUG (M14X1.5) 1
9 50.508.12.000. COPPER WASHER (14X20) 1
10 4H.023.02.0.00 THERMOSTAT BYPASS HOSE 1
WORM DRIVE CLAMP ( JUPITOR
11 2H.112.02.0.00 2
JW7B13, 29 TO 45 DIA)
12 50.003.08.025 SET SCREW - M8X1.25X25 - 8.8 4
13 50.506.08.000 PLAIN MACHINED WASHER - M8 4

83
TITLE: - THERMOSTAT AND HOUSING
GROUP: - 4H.096…EXP
ASSEMBLY (USA)

3 6

11 7

10

11

2
12 5
9 13
8

14

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

JOINT FOR THERMOSTAT
14 4H.053.11.0.00 1
HOUSING

84
TITLE: - TOOLS FOR FIRE FIGHTING
GROUP: - 4H.1439
APPLICATION

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

TOOL KIT BOX FOR FIRE
1 4H.1439.10.0.00 1
FIGHTING APPLICATION

85
TITLE: - TURBO LUB OIL PIPING (FOR K27) GROUP:- 6H.141.2

14
1 8
5
4
4
5
13

2 12

13
6
9
7
5
10
11

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 6H.141.10.0.00 LUB OIL INLET PIPE ASSLY.(K27) 1
2 4H.132.02.0.00 ADAPTOR (TURBOCHARGER SIDE) 1
JOINT FOR ADAPTOR
3 4H.132.27.0.00 1
(TURBO SIDE)
4 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 4
5 50.506.08.000. PLAIN MACHINED WASHER - M8 6
6 6H.034.03.0.00 ADAPTOR FOR OIL PIPE 1
7 50.508.14.000. COPPER WASHER (16X22) 2
8 4H.527.30.0.00 LUB OIL DRAIN PIPE ASSEMBLY 1
ADAPTOR ASSEMBLY FOR TURBO
9 4H.132.13.0.00 1
DRAIN (CRANKCASE SIDE)
10 50.002.08.045. SET BOLT - M8X1.25X45 - 8.8 2
JOINT FOR ADAPTOR CRANKCASE
11 4H.132.31.0.00 1
SIDE
HOSE (FOR TURBO DTAIN PIPE 170
12 4H.366.08.0.00 1
MM)
HOSE CLIP (30 MM) For
13 50.519.06.000. 2
48.019.02.0.00, 40.149.02.0.00
14 6H.141.04.0.00 JOINT FOR LUB OIL DRAIN (K27) 1

86
TITLE: - TURBOCHARGER FOR 6RTA SPP
GROUP: - 6H.1135
ENGINE

4
2

3
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 6H.1135.10.0.00 TURBOCHARGER ASSEMBLY 1 OF SR. NO
(6R SPP) 2 TO 7
TURBOCHARGER FOR 6R1080TA
SPP FIREFIGHTING PUMP
2 6H.1135.01.0.00 1
APPLICATION
(K27.2 3371 OLAKE 15.21)
JOINT FOR OIL RETURN PIPE
3 F6.169.31.0.00 TURBOCHARGER 2
(NON ASBESTOS)
4 F6.377.11.0.00 STUD M8 (COPPER COATED) 6
5 50.080.08.000. NUT (SS) - M8x1.25 6
JOINT FOR OIL SUPPLY
6 F6.169.32.0.00 TURBOCHARGER (NON 1
ASBESTOS)
7 F6.377.09.0.00 JOINT FOR TURBO INLET 1

87
TITLE:- V BELT XPA1280 GROUP:- 4H.692

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.692.01.0.00 V BELT XPA 1280 1

88
TITLE: - VALVE ROCKER ASSLY GROUP: - 6H.012.2

5 4
9
16
15
10 12 8
19 7
11

7
8 6
17
23
21 21
18 20 5
20
21 4
21

22

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
ROCKER SHAFT ASSEMBLY
*1 6H.012.140.0.00 1 OF SR. NO. 2 &
(COMPLETE) 20 TO 22
CONSISTING
*2 6H.012.130.0.00 VALVE ROCKER ASSEMBLY 2 OF SR. NO. 3 &
7 TO 13,
CONSISTING
*3 6H.012.120.0.00 ROCKER SHAFT SUBASSLY 1 OF SR. NO. 4
TO 6
ROCKER SHAFT (WITHOUT OIL
4 3H.010.05.0.00 1
GROOVE)
SOCKET HEAD GRUB SCREW -
5 50.022.12.010. 2
M12X10
6 4H.008.04.0.00 GROOVED SOCKET PIN 1
7 2H.022.04.0.00 WASHER(FOR ROCKER ARM) 2
E TYPE CIRCLIP-EXTERNAL(15
8 50.513.15.000. 2
DIA.)
SPRING (FOR VALVE ROCKER
9 4H.1433.05.0.00 2
SHAFT)
10 3H.010.04.0.00 ROCKER SUPPORT (F.W.E.) 1

89
TITLE: - VALVE ROCKER ASSLY GROUP: - 6H.012.2

5 4
9
16
15
10 12 8
19 7
11

7
8 6
17
23
21 21
18 20 5
20
21 4
21

22

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

11 4H.1433.03.0.00 ROCKER SUPPORT 2
12 50.003.08.030. SET SCREW - M8X1.25X30 - 8.8 2
CONSISTING
*13 4H.1433.20.0.00 ROCKER LEVER SUB ASSLY 6 OF SR. NO. 14,
17 TO 19,
CONSISTING
OF SR. NO. 15,
*14 4H.1433.10.0.00 ROCKER LEVER ASSEMBLY 1 16, NOT
SUPPLIED
LOOSE
NOT SUPPLIED
15 4H.1433.01.0.00 ROCKER ARM (FINISH) 1
LOOSE
NOT SUPPLIED
16 02.024.12.9.00 V.R. BUSH (SEMI FINISH) 1
LOOSE
NOT SUPPLIED
17 02.024.15.0.00 V.R.TOE 1
LOOSE
18 02.024.13.0.00 ROCKER-ARM ADJ. SCREW 1
19 02.024.27.0.00 NUT FOR ROCKER ADJ.SCREW 1
20 6H.012.02.0.00 BANJO BOLT 2
21 50.508.10.0.00 COPPER WASHER (12X18) 4

90
TITLE: - VALVE ROCKER ASSLY GROUP: - 6H.012.2

5 4
9
16
15
10 12 8
19 7
11

7
8 6
17
23
21 21
18 20 5
20
21 4
21

22

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

22 6H.012.03.0.00 ASSEMBLY OF ADAPTOR & PIPE 1
23 3H.010.06.0.00 OIL METERING ORIFICE (DIA 8) 1

91
TITLE: - WATER COOLED CAC AND
GROUP: - 6H.1142
MOUNTING FOR F.F. ENGINES

6
16
4 7
3
5 8

10 9
13 11
25
1
14 30
12 17
13 29 22
5 28
2
15 27
26
18
23
21 5
20 24
19

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

WATER COOLED CAC FOR
1 6H.1142.01.0.00 1
6R1080TA ENGINE(FIRE FIGHTING)
2 F6.840.02.0.00 AIR SIDE COVER (FOR CAC IN) 1
3 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 52
4 F6.840.03.0.00 AIR SIDE COVER (FOR CAC OUT) 1
5 50.506.08.000. PLAIN MACHINED WASHER - M8 52
6 6H.1242.02.0.00 AIR INLET BEND(FOR CAC OUT) 1
HOSE(AIR OUTLET COVER TO
7 6H.1142.07.0.00 1
INLET BEND)
8 6H.1142.08.0.00 AIR INLET ADAPTOR 1
9 6H.058.02.0.00 JOINT FOR AIR PIPE 1
10 6H.1142.09.0.00 BRACKET FOR CAC MOUNTING 1
11 50.003.10.030. SET SCREW - M10X1.5X30 - 8.8 8
12 50.506.10.000. PLAIN MACHINED WASHER - M10 20
13 F6.840.06.0.00 JOINT FOR AIR DELIVERY BEND 2
14 6H.1142.12.0.PR RAW WATER PIPE (CAC TO H.E.) 1
JOINT (FOR RAW WATER
15 F6.993.13.0.00 2
INLET/OUTLET)

92
TITLE: - WATER COOLED CAC AND
GROUP: - 6H.1142
MOUNTING FOR F.F. ENGINES

6
16
4 7
3
5 8

10 9
13 11
25
1
14 30
12 17
13 29 22
5 28
2
15 27
26
18
23
21 5
20 24
19

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

JOINT FOR AIR INLET MANIFOLD
16 F6.674.04.0.00 1
OUTLET
17 50.003.10.040. SET SCREW - M10X1.5X40 - 8.8 4
SOCKET HEAD SCREW -
18 50.011.08.025. 12
M8X1.25X25 - 8.8
19 6H.1142.04.0.00 AIR DELIVERY PIPE(T/C TO CAC) 1
HOSE AT CAC IN (100 ID X 100 ID X
20 F6.840.16.0.00 1
80 LENGTH)
JUPITER WORM DRIVE CLAMP,
21 48.305.08.0.00 TYPE JW 7B16, 110 mm DIA(S/F 2
110mm HOSE O.D.)
22 50.006.10.000. NUT - M10X1.5 - GR.8.8 4
23 50.003.08.030. SET SCREW - M8X1.25X30 - 8.8 4
24 50.006.08.000. NUT- M8X1.25 - GR.8.8 2
25 50.003.10.025. SET SCREW - M10X1.5X25 - 8.8 2
26 F6.889.04.0.00 AIR DELIVERY BEND FOR 200 KVA 1
JOINT IN BETWEEN AIR DELIVERY
27 F6.377.15.0.00 1
MAINPIPE AND BEND
28 F6.889.05.0.PR O'RING (FOR K27 TURBO OUTLET) 1

93
TITLE: - WATER COOLED CAC AND
GROUP: - 6H.1142
MOUNTING FOR F.F. ENGINES

6
16
4 7
3
5 8

10 9
13 11
25
1
14 30
12 17
13 29 22
5 28
2
15 27
26
18
23
21 5
20 24
19

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

29 F6.377.04.0.00 V BEND CLAMP 1
JUPITER T -BOLT CLAMP S/F 83MM
30 F6.377.16.0.00 1
O.D

94
TITLE: - WATER HEATER AND MOUNTING
GROUP: - 6H.1144
(KIM HOTSTART)

8
21
20
9
13

11 7 18
16 17

16 3

5
6 1
10
22
12
18 2
14
17 16
18 4
21
15 19
17

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

WATER HEATER(KIM HOTSTART,
1 F6.482.01.0.00 1
TPS202GT12-006, 2.0kW, 240V)
BRACKET (FOR WATER HEATER
2 6H.1144.01.0.00 1
MTG)
3 50.003.06.020. SET SCREW - M6X1X20 - 8.8 8
4 50.006.06.000. NUT - M6X1 - GR.8.8 8
5 50.506.06.000. PLAIN MACHINED WASHER - M6 16
6 6H.1144.03.0.00 WATER INLET PIPE (FOR HEATER) 1
RUBBER HOSE (FOR WATER
7 4H.1355.13.0.PR 1
HEATER)
ADAPTOR ON CYLINDER HEAD
8 4H.1355.12.0.PR 1
(FOR WATER HEATER INLET)
JOINT FOR WATER OUTLET
9 4H.022.11.0.00 1
MANIFOLD
10 4H.1355.08.0.00 CLAMP FOR WATER HEATER PIPE 1
TERMINAL BOX WITH PHONIX
11 F6.984.10.0.00 MAKE UK10 TERMINAL 1
ASSEMBLY FOR WATER HEATER

95
TITLE: - WATER HEATER AND MOUNTING
GROUP: - 6H.1144
(KIM HOTSTART)

8
21
20
9
13

11 7 18
16 17

16 3

5
6 1
10
22
12
18 2
14
17 16
18 4
21
15 19
17

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CLAMPING BRACKET FOR WATER
12 6H.1144.05.0.00 1
HEATER INLET PIPE
BRACKET FOR JUNCTION
13 6H.1144.06.0.00 1
BOX(WATER HEATER S/F 6R)
14 4H.1355.05.0.00 HOSE FOR WATER HEATER PIPE 1
RUBBER BOOT(FOR WATER
15 4H.1355.09.0.00 2
HEATER PIPE CLAMPING BKT)
16 49.097.08.0.00 HOSE CLIP SIZE NO 1 28X30 5
17 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 4
18 50.506.08.000. PLAIN MACHINED WASHER - M8 4
19 50.003.10.030. SET SCREW - M10X1.5X30 - 8.8 2
20 50.003.10.025. SET SCREW - M10X1.5X25 - 8.8 2
21 50.506.10.000. PLAIN MACHINED WASHER - M10 8
22 50.006.10.000. NUT - M10X1.5 - GR.8.8 4

96
TITLE:- WATER PUMP GROUP:- 4H.052…EXP

2 5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 4H.052.12.0.00 JOINT FOR DELIVERY VOLUTE 1
WATER PUMP ASSEMBLY
2 4H.052.95.0.00 1
(HIGHER BEARING SIZE)
3 50.002.10.060. SET BOLT - M10X1.5X60 - 8.8 3
4 50.002.10.070. SET BOLT - M10X1.5X70 - 8.8 2
5 50.506.10.000. PLAIN MACHINED WASHER - M10 5

97
TITLE: - WIRING HARNESS 6R1080TA F.F.SET GROUP: - 6H.902.4

2 1

6
BATTERY 1 OR 2 POSITIVE
CABLE CONNECTION ONLY
9
(REMOVE THIS TAG
4 BEFORE
INSTALLING CABLE)
3
7 11
BATTERY 1 & 2 GROUND
CABLE CONNECTION ONLY
(REMOVE THIS TAG
BEFORE
INSTALLING CABLE) 10

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

PANEL TO PANEL WIRING
HARNESS ASSEMBLY F.F.SET
1 6H.902.80.0.PR (REVISED STANDARD FMUL 1
PROJECT) WITH 16-PIN
CONNECTOR
16-PIN CONNECTOR ALLIED MAKE
2 6H.902.16.0.00 1
MS3106F-36-14S (FEMALE TYPE)
BATTERY STARTER CABLE 6R &
3 F6.927.90.0.PR 1
SL90TA FM/UL CE MARK
WIRING HARNESS ASSEMBLY
6R1080TA F.F.SET (REVISED
4 F6.928.70.0.PR STANDARD FMUL PROJECT) WITH 1
ALTERNATOR & 23-PIN
CONNECTOR
23-PIN CONNECTOR ALLIED
5 6H.902.24.0.00 MAKE MS-3106-E-32-6-S 1
(FE-MALE TYPE PINS)
BATTERY +VE (POSITIVE)
6 6H.902.17.0.00 2
CONNECTION TAG

98
TITLE: - WIRING HARNESS 6R1080TA F.F.SET GROUP: - 6H.902.4

2 1

6
BATTERY 1 OR 2 POSITIVE
CABLE CONNECTION ONLY
9
(REMOVE THIS TAG
4 BEFORE
INSTALLING CABLE)
3
7 11
BATTERY 1 & 2 GROUND
CABLE CONNECTION ONLY
(REMOVE THIS TAG
BEFORE
INSTALLING CABLE) 10

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

BATTERY –VE (NEGATIVE)
7 6H.902.18.0.00 1
CONNECTION TAG
NOT
8 4H.906.11.0.PR RELAY 24VDC,100A BAGLA MAKE 1 ILLUSTRATED
ADAPTOR FOR STARTER
9 F6.483.07.0.PR 1
RELAY(M8 X 1.25-M6 X1)
10 50.003.06.016 SET SCREW - M6X1X16 - 8.8 1
11 50.506.06.000 PLAIN MACHINED WASHER - M6 2

99