Scribd
Upload
41 views

CH352 CED Lecture 1

This document provides details about the CH352 Process Equipment Design course offered at the National Institute of Technology Warangal. The course is taught fully online and involves the process design of separation columns, heat transfer equipment, and mechanical design of process equipment. It is a 4-credit course taught over 14 weeks with lectures, tutorials, assignments, tests, and a focus on attaining skills in equipment drawing, design, and achieving defined course outcomes.

Uploaded by

Abhishek Upadhyayula
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
41 views

CH352 CED Lecture 1

This document provides details about the CH352 Process Equipment Design course offered at the National Institute of Technology Warangal. The course is taught fully online and involves the process design of separation columns, heat transfer equipment, and mechanical design of process equipment. It is a 4-credit course taught over 14 weeks with lectures, tutorials, assignments, tests, and a focus on attaining skills in equipment drawing, design, and achieving defined course outcomes.

Uploaded by

Abhishek Upadhyayula
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Department of Chemical Engineering

National Institute of Technology Warangal

Lecture 1: Course Introduction

CH352 Process Equipment Design (Open Book)

Course Instructor: Dr. Raghu Raja Pandiyan Kuppusamy,


Department of Chemical Engineering, NIT Warangal
[email protected]
8002486897
Course Details

 CH352 Process Equipment Design (Open Book)

 4 Credit Course – 3 Lecture Session, 1 Tutorial Session

 Weekly Schedule : Monday 1:30 PM to 2:25 PM


Tuesday 1:30 PM to 2:25 PM
Thursday 10:05 AM to 11 AM
Friday 1:30 PM to 2:25 PM
Saturday (as per instruction)

 Pre-requisites: CH202- Fluid and Particle Mechanics; CH252 - Heat


Transfer; CH301 - Chemical Reaction Engineering-II; CH302 - Mass
Transfer-II

 Online Mode
Detailed Syllabus

Introduction to process design of Separation columns (Distillation,


Absorption, and Extraction): Design variables, general design
considerations, process design methods, Column sizing, Plate and packed
column hydraulics design.

Process design of heat-transfer equipment: Types of heat exchanger,


Process design of shell and tube heat exchanger, Condenser, and reboilers.

Drawing: Drawing of process equipment symbols for fluid handling, heat


transfer, mass transfer, and mechanical operations Detailed drawing of
equipment, Drawing of process flow diagram, Piping and instrumentation
diagram (P&ID), Vessel and piping layout isometrics.

Mechanical Design of Process Equipment: Introduction to mechanical


aspects of chemical equipment design, Design Preliminaries, Design of
cylindrical and spherical vessels under internal pressure, external pressure
and combined loading, Design of heads and closers, Design of tall vessels.
Design of a heat exchanger, Design of an absorber, Design of a distillation
column, Design of evaporator, Design of condenser, Design of a chemical
reactor.
Text Books and Reference Books
1. R.K. Sinnott, Coulson & Richardson's Chemical Engineering, Volume 06,
Elsevier, 3rd Edition, 2005.

2. Robert E. Treybal, Mass Transfer Operations, McGraw Hill Education, 3rd


Edition, 1980.

3. Donald Q. Kern, Process Heat Transfer, Tata McGraw-Hill Education, Indian


Edition, 1stEdition, 2017.

4. Bhattacharya B.C., Introduction to Chemical Equipment Design- Mechanical


Aspects, CBS Publishers and Distributors, 2008.

5. Mahajani V.V. and Umarji S.B., Joshi's process equipment design, Trinity Press,
4th Edition, 2014.

6. Brownell L.E, Process Equipment Design - Vessel Design, Wiley Eastern Ltd.,
1986.

7. Towler G. P. and R. K. Sinnott, Chemical Engineering Design, Principles,


Practice and Economics of Plant and Process Design, Butterworth Heinemann, 2nd
Edition, 2012.

8. Nicholas O Cheremisinoff, Handbook of chemical process equipment,


Butterworth-Heinemann, 2000.
Assessment
Scheme of Evaluation
Mid Semester – 30 Marks,

End Semester – 40 Marks,

Internal – 30 Marks
Minor 1 & Minor 2
(Class Test + Assignment)

Class Representative
Coordinate with the students and teacher
for
Announcements,
Issues related to subject/class
Name:
Email address:
Phone number:
Detailed Lecture Plan

Topic Reference
Module-2: Process Design of Heat Transfer Equipment
Types of heat exchanger (2 hour)
Process design of shell and tube heat exchanger (4 hour) Process Heat
Transfer by DQ
Process design of Condenser (2 hour) Kern
Process design of reboilers (2 hour)

Topic Reference
Module-1: Introduction to process design of Separation columns (Distillation,
Absorption, and Extraction)
Design Variables (1 hour) R.K. Sinnott,
Design of binary and multicomponent columns (6 hour) Coulson &
Richardson's
Column sizing, Plate and packed column. Chemical
(3 hour) Engineering, Vol
hydraulics design(2 hour) 6
Detailed Lecture Plan
Topic Reference
Module-3: Drawing
Drawing of process equipment symbols for fluid handling, heat
transfer, mass transfer, and mechanical operations Detailed drawing All references
of equipment, Drawing of process flow diagram, Piping and sited in text and
instrumentation diagram (P&ID), Vessel and piping layout reference books
isometrics (8 Hours)

Topic Reference
Module-4: Mechanical Design of Process Equipment
Introduction to mechanical aspects of chemical equipment design,
Design Preliminaries (2 hour)
Design of cylindrical and spherical vessels under internal pressure,
Mechanical
external pressure and combined loading, (6 hour)
Design of
Design of heads and closers, Design of tall vessels. (3 Hour)
Equipment's by
Design of a heat exchanger, Design of an absorber, Design of a PV Joshi
distillation column, Design of evaporator, Design of condenser,
Design of a chemical reactor.
(8 hour)
Course Outcomes

At the end of the course, the student will be able to:

CO1 Evaluate the process design considerations of separation


columns and heat transfer equipment

CO2 Draw process flow diagrams and process instrumentation


diagrams

CO3 Apply mechanical design concepts to process equipment

CO4 Design heat exchangers, evaporators, absorbers, distillation


columns, reactors

You might also like