Scribd
Upload
51 views14 pages

Dokumen - Tips - Csec Physics Review Introduction To Logic Gates

This document introduces the seven basic logic gates: NOT, AND, OR, NAND, NOR, XOR, and XNOR. It provides a brief definition and truth table for each gate, describing their inputs, outputs, and functions. Specifically, it explains that logic gates are the basic building blocks of digital circuits, having binary inputs of 0 or 1 that represent low and high voltage levels. The output of each gate is determined by the logical combinations of its inputs based on the specific gate.

Uploaded by

Ashley Thomas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views14 pages

Dokumen - Tips - Csec Physics Review Introduction To Logic Gates

This document introduces the seven basic logic gates: NOT, AND, OR, NAND, NOR, XOR, and XNOR. It provides a brief definition and truth table for each gate, describing their inputs, outputs, and functions. Specifically, it explains that logic gates are the basic building blocks of digital circuits, having binary inputs of 0 or 1 that represent low and high voltage levels. The output of each gate is determined by the logical combinations of its inputs based on the specific gate.

Uploaded by

Ashley Thomas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

Introduction To Logic Gates

For CSEC Physics

www.cxctutor.org
What Are Logic Gates
A logic gate is an elementary building block of a digital
circuit.

Most logic gates have two inputs and one output. At any
given moment, every terminal is in one of two Binary
Conditions: Low (0) or High (1), represented by different
voltage levels.

The logic state of a terminal can, and generally does,


change often, as the circuit processes data. In most logic
gates, the low state is approximately zero volts (0 V), while
the high state is approximately five volts positive (+5 V).
There are seven basic Logic
Gates:

NOT, AND, OR, NAND, NOR, XOR and XNOR

We will look at each of them individually.


The ‘NOT’ Gate
• This is the most basic type of
logic gate which only accepts
one input.

• The function of this gate is to


function as a logical inverter,
and hence reverses the logic
state of its input.
The ‘AND’ Gate
This logic gate has two inputs that produces one
output. The output is 1 (High) only when both
inputs are also high. Otherwise the value for the
output is 0 (Low). Below is a table showing the logical
combinations for the AND gate:

Input 1 (A) Input 2 (B) Output (Y)

0 0 0
0 1 0
1 0 0
1 1 1
The ‘OR’ Gate
• This logic gate also has two
inputs and one output.

• The output is 1 (High) if


either or both of the inputs
are high.

• The output is 0 (Low) only if


both outputs are 0 (Low).
The ‘NAND’ Gate
This logic gate operates as an AND gate that is
followed by a NOT gate. The output is 0 (Low) only
when both inputs are also high. Otherwise the
value for the output is 1 (High). Below is a table
showing the logical combinations for the NAND gate:

Input 1 (A) Input 2 (B) Output (Y)

0 0 1
0 1 1
1 0 1
1 1 0
The ‘NOR’ Gate
• This logic gate is a
combination of the OR gate
followed by an inverter or NOT
gate.

• The output is 1 (High) only if


both of the inputs are 0
(Low).

• Otherwise the output is 0


(Low).
The ‘XOR’ Gate
This logic gate acts similar to the OR gate however with the
following exception: The output is 1 (High) if either but
not both inputs are also high. Conversely, the output is 0
(Low) if both inputs are Low or if both inputs are High.
Below is a table showing the logical combinations for the
XOR gate:

Input 1 (A) Input 2 (B) Output (Y)

0 0 0
0 1 1
1 0 1
1 1 0
The ‘XNOR’ Gate
• This logic gate is a
combination of the XOR gate
followed by an inverter or NOT
gate.

• The output is 1 (High) only if


both of the inputs are are
the same.

• Otherwise the output is 0


(Low).
Closing Remark
It is by using combinations of logic gates, that complex
operations can be performed.

In theory, there is no limit to the number of gates than can be


arranged together in a single device, but in practice, there is
always a limit to how many components that can be packed
into a given physical space.

Arrays of logic gates are found in many digital integrated


circuits. As technology advances, the required physical volume
for each individual logic gate decrease and overall digital
devices become smaller and capable of even more
complicated operations at an increased speed.

You might also like