SCOPE OF WORK
The scope of works for the Design of Industrial facility is given below:
Architectural Design Service.
Structure & Civil Engineering Design Service.
Mechanical, Electrical and Plumbing (MEP) Design Service
Huntsman to provide details: Upon signing the service agreement, the client shall provide CAD site surveys, site
context plan, finalized schedule of accommodation (SOA), population, visitor number and operational brief before
commencement of services.
Architectural Design
I. Concept Design
Site Analysis & Design Intents study (Workshop with client team)
Study on surrounding Infrastructure and Land Use plan
Proposed Site level Activity Zoning Plan
Proposed Site level Amenities Location Plan
Proposed Plan for Parking, Vehicular circulation,
Open Space and Pedestrian Circulation
Proposed Form and Massing Details, with depiction of the overall architectural vocabulary
Concept Architectural Layout Plan and drawings
Intent Architectural Materials and Finishes
Sustainability Concepts
Conceptual Statement of Areas
Landscape structures and landscape features design intent
Planting strategy design.
Hardscape and Softscape Strategy and intent materials.
II. Schematic Design
Finalizing conceptual design to enable preparation of complete Schematic/ design development drawings
Identifying all relevant Standards, Code of Practices and Local Government regulations, which will be
required to complete the design
Developing schematic design as appropriate to enable all designers/vendors to commence the detail
design
Coordination with all the engineering discipline
III. Statutory approval drawings and documents
Preparing statutory approval drawings and details in compliance with all local building codes, regulations,
and construction guidelines
Preparing all the relevant documents for obtaining approval from all relevant Authorities
IV. Design Development and Tender drawings
Preparing all the relevant details and design drawings as appropriate to enable Tendering/ contracting
process and to enable vendors/ specific consultant to commence detail design/ work.
Preparing detailed bill of quantity and technical specifications as per the tender drawings/design intent
with recommended make/brands.
V. GFC (Good for Construction) Stage
Provide Final Good for Construction Drawings with stamps and signature.
Providing clarification/advice in resolving design related problems.
Civil & Structural Engineering Design Services
I. Concept Design
Study on feasible structure systems for the proposed architecture design
Concept sketch of the proposed structural system.
II. Schematic Design
- Studying feasible structure systems for the proposed architecture design
- Sketch of the proposed structural system.
Finalizing conceptual design to enable preparation of complete design development drawings.
Identifying all relevant Standards, Code of Practices and Local Government regulations required to
complete the design (according to BNBC).
Developing schematic design as appropriate to commence the detail design.
Updating and finalize the structural scheme/system according to requirements of the Client, local
authorities, and Architect.
Preparing structure general arrangement system.
Basic coordination with all the engineering discipline.
Drawings for site level civil works like roads, drains etc.
Preparing Design Basis Reports (DBR).
III. Statutory approval drawings and documents
Providing all the relevant detailed design inputs for obtaining approval from all relevant Authorities.
Preparing all the relevant documents for obtaining approval from all relevant Authorities
IV. Tender drawings
Analysing structure system for its stability according to the requirements of the Client, local
regulatory bodies & authorities, and Architect.
Drawings for site level civil works like roads, drains etc.
Preparing all the relevant details and design drawings as appropriate to enable Tendering/
contracting process and to enable vendors/ specialized consultant to commence detail design/work.
Preparing detailed bill of quantity and technical specifications as per the tender drawings/ design
intent with recommended make/brands.
V. GFC Stage
Provide Final Good for Construction Drawings with stamp and signature.
Provide Detail Structural Reinforcement Drawings to enable construction.
Providing clarification/advice in resolving design related problems.
Mechanical, Electrical & Plumbing Engineering Design Service
I. Concept Design
Study on various MEP strategy systems.
Conceptual cooling load and power demand calculation.
Conceptual schematic diagrams at building/site level design
Conceptual distribution system.
II. Schematic Design
Finalizing conceptual design to enable the preparation of complete design development
drawings.
Identifying all relevant Standards, Code of Practices and Local Government regulations, which
will be required to complete the design (according to BNBC).
To develop from the approved conceptual design into full system schematics for the various MEP
systems such as:
Electrical & Lightning protection and Earthing system.
Telecommunication system/ IT [Data & Voice] (Only building spine/Passive system)
ACMV airflow and piping systems.
Fire Detection, Alarm & public address system.
Fire protection system.
Building Management System [only back-end]
Landscape Water Reticulation System
Back-up Power System
Plumbing and sanitary system
Storm Water Drainage System
Water storage and distribution System
Rainwater harvesting system
Master Antenna for satellite TV
Making basic coordination with all the engineering disciplines.
Preparing Design Basis Reports (DBR).
III. Statutory approval drawings
Providing all the relevant detailed design drawings for obtaining approval from all relevant
Authorities as required.
Preparing all the relevant documents for obtaining approval from all relevant Authorities
IV. Tender drawings
Coordinating on the detail routing of MEP services and layout of fittings and equipment
Preparing all the relevant details and design drawings as appropriate to enable Tendering/
contracting process and to enable vendors/ specialized consultant to commence detail
design/work
Preparing detailed bill of quantity and technical specifications as per local codes and standard
engineering practices with recommended make/brands.
Preparing type/ list/schedule of equipment
V. GFC Stage
Provide Final Good for Construction Drawings with stamp and signature.
Providing clarification/advice in resolving design related problems.
Initial Environmental Examination (IEE), Environmental Impact Assessment (EIA) and Environmental
Management Plan (EMP) – Optional
Initial Environmental Examination (IEE)
Terms of Reference (ToR) for the EIA
Environmental Impact Assessment (EIA) including Environmental Management Plans
The consultant will conduct these studies following guidelines of the Environment Conservation Rules,
1997 and Environment Conservation Act 1995.
Technical Evaluation of Vendors - Optional
Collection of Technical Proposal as per the BOQ and the Specification
Evaluation of Technical Proposal by the Vendors
For each discipline minimum three vendors
Technical comparison with technical rating
DELIVERABLES
Concept Design
1 D1: 2 Copies of A3 Size Concept design report
D2: 3 Nos. of 3D Perspective View Rendering Images*
Schematic Design
2 D3: 3 Copies of A2 size Schematic Design drawing set
D4: 2 Copies of A3/A4 final DBR
Statutory Approval Drawings and Documents
No. of drawings and documents based on local authorities. IEE Report (Optional)
EIA & EMP Report (Optional)
Design Development and Tender
D5: 2 Copies of A1 Tender/Construction Drawing sets for each discipline.
D6: 1 Copy of A4 Technical Specifications and BOQ
D7: 1 CD containing Tender Drawings, Technical Specifications, BOQ (PDF format)
GFC Stage
D8: 2 copies of Structure Details & Reinforcement drawings and GFC (Good for Construction) Drawings (PDF
format)
D9: Technical Evaluation Report of Three Vendors (Optional)
PROGRAMME: PLEASE INDICATE TIMELINE
Options:
Soil investigation and topographical/ hydrographical survey of the site.
Environmental impact assessments/ studies.
Solid / Industrial Waste disposal system
