TomTom ONEv5 XLv2 en GB
TomTom ONEv5 XLv2 en GB
1.
Installation
Installation
7
2 SEC
180
2.
b EasyPortTM holder
c Car charger
e Documentation pack
f USB cable
3.
Battery notes
The battery in your TomTom ONE/XL/XXL navigation device charges when you connect it to the car charger or to your computer. When you connect your device to a computer, you are asked if you want to connect to the computer. If you select No and then do not tap the screen within three minutes, the device will automatically switch off. This happens so that the battery can charge faster. Note: You should plug the USB connector directly into a USB port on your computer and not into a USB hub or USB port on a keyboard or monitor.
GPS reception
When you first start your TomTom ONE/XL/XXL navigation device, the device may need a few minutes to determine your GPS position and show your current position on the map. In future, your position will be found much faster, usually within a few seconds. To ensure good GPS reception, you should use your device outdoors. Large objects such as tall buildings can sometimes interfere with reception.
4.
Safety
Safety
You can attach the dock to the windscreen, side window or use a Dashboard Mount Disk to attach the dock to your dashboard. TomTom also offers alternative mounting solutions for your TomTom navigation device. For more information about Dashboard Mount Disks and alternative mounting solutions, go to tomtom.com/accessories.
Safety preferences
We recommend using the safety preferences to make your driving as safe as possible. The safety preferences include, for example, the following options: Hide most menu options when driving Show safety reminders Warn when driving faster than allowed
5.
Planning a route with your TomTom ONE/XL/XXL navigation device is easy. To plan a route, follow the steps below. Important: For safety reasons, you should always plan a route before you start your journey. 1. Tap the screen to bring up the Main Menu. Note: The buttons on your navigation device are shown in full colour unless a button is currently unavailable. For example, the button named Find alternative in the Main Menu is not available until you have planned a route. 2. Tap Navigate to...
3. Tap Address.
When you enter an address, you can choose from the following options: City centre - tap this button to set your destination as the centre of a city or town. Street and house number - tap this button to set an exact address as your destination. Postcode - tap this button to enter a postcode as your destination.
Note: You can enter a postcode for any country. In some countries, postcodes are detailed enough to identify a house on their own. In other countries you can enter a postcode to identify a town or area. You will then have to enter a street and house number. Crossing or intersection - tap this button to set your destination as the point where two streets meet. In this example, we will enter an address. 4. Tap Street and house number.
Note: When planning a trip for the first time your navigation device asks you to choose a state or country. Your choice is saved and used for all routes you plan. You can change this setting at any time by tapping the flag. 5. Start to type the name of the town where you want to go.
As you type, the names of the towns that match what you have typed are shown. When your destination appears in the list, tap the name of the town to set the destination. 6. Start to type the street name. Tap the name when it is shown in the list. As with the name of the town, the names of the streets that match what you have typed are shown. When your destination appears in the list, tap the name of the street to set the destination. 7. Enter the house number and then tap Done.
10
8. Your navigation device asks if you need to arrive at a particular time. For this exercise, tap NO. The route is calculated by your device using IQ RoutesTM. IQ Routes is used to plan the best possible route using information about the average speeds measured on the roads. When the route has been calculated, tap Done. Your TomTom ONE/XL/XXL navigation device begins to guide you to your destination.
Arrival times
When you plan a route, your TomTom ONE/XL/XXL asks you if you need to arrive at a particular time. Tap YES to enter a preferred arrival time. Your ONE/XL/XXL calculates your arrival time and shows you whether you will arrive on time. You can also use this information to work out when you need to leave. If your ONE/XL/XXL shows that you will arrive 30 minutes early, you can wait and leave in 30 minutes time, rather than arrive early. Your arrival time is constantly recalculated during your journey. The status bar shows whether you will arrive on time or if you are going to be late, as shown below: You will arrive 55 minutes before the arrival time you entered. If the estimated arrival time is more than five minutes before the time you entered, it is shown in green.
11
You will arrive 3 minutes before the arrival time you entered. If the estimated arrival time is less than 5 minutes before the time you entered, it is shown in yellow. You will arrive 19 minutes late. If the estimated arrival time is later than the time you entered, it is shown in red. Tap Status bar preferences in the Preferences menu, to enable or disable arrival time notifications.
Status bar preferences
Select the required options on the first menu screen and then tap Done. To enable arrival time notifications, select Show leeway to arrival time.
Favourite
Address
Tap this button to select your destination from a list of places you have recently used as destinations.
Recent destination
Point of Interest
Tap this button to select a point on the map as your destination using the map browser.
Point on map
12
Tap this button to enter a destination using latitude and longitude values.
Latitude Longitude
Tap this button to select your last recorded position, as your destination.
Prepare route
3. Select the starting point for your journey in the same way that you would select your destination. 4. Set the destination for your journey. 5. Choose the type of route that should be planned. Fastest route - the route which takes the least time. Eco route - the most fuel-efficient route for your journey. Shortest route - the shortest distance between the locations you set. This may not be the quickest route, especially if the shortest route is through a town or city. Avoid motorways - a route which avoids motorways. Walking route - a route designed for making the journey on foot. Bicycle route - a route designed for making the journey on a bicycle. Limited speed - a route for a vehicle which can only be driven at a limited speed. You have to specify the maximum speed. 6. Choose when you will make the journey you are planning. There are three options:
13
Now Specific date and time - you will be asked to enter the date and time. No specific date and time If you select either Now or Specific date and time, your ONE/XL/XXL uses IQ Routes to work out the best possible route at that time, using the real average speeds measured on roads. In this way you can compare how long a journey takes at different times of day, or on different days of the week. 7. Your TomTom ONE/XL/XXL plans the route between the two locations you selected.
Tap this button to see each turn in the journey. Tap the right and left arrows to move forwards and backwards through the journey.
Browse as images
Tap the screen to turn off the 3D display and view the map from above. Tap this button to see an overview of the route using the map browser.
Tap this button to watch a demo of the journey. You can interrupt the demo at any time by tapping the screen.
Show route demo
View route
14
6.
Driving View
Driving View
When your TomTom ONE/XL/XXL starts, you are shown the Driving View along with detailed information about your current location. Tap the centre of the screen at any time to open the Main Menu. Note: The Driving View is shown in black and white until your ONE/XL/XXL locates your current position.
A Tap + and - to zoom in and out. B Quick menu - switch this on in the Preferences menu. C Your current position. D The name of the next major road or road sign information, if applicable. E Traffic bar - requires an RDS-TMC Traffic Receiver (available as an accessory). F Navigation instruction for the road ahead. Tap this area to repeat the last spoken instruction and to change the volume. G The name of the street you are on. H Information about your journey such as journey time, remaining distance and arrival time. To change the information shown, tap Status bar preferences in the Preferences menu. I GPS signal strength.
15
7.
For other exits and junctions, your ONE/XL/XXL shows the lane you should take in the status bar. To turn this guidance off, tap Change preferences in the Main Menu, then tap Status bar preferences. Clear the checkbox for Show lane guidance.
16
8.
Once you have planned a route, you may want to change something about the route, without changing your destination.
The Find alternative... button is also shown in the route summary screen after you plan a route. Tap this button to calculate an alternative to the route already planned. Your ONE/XL/XXL will look for another route from your current location to your destination. If you decide you would prefer to use the original route after all, tap Recalculate original. Why would I need to do this? Apart from the roads near your position and near your destination, the new route will use totally different roads to reach your destination. This is an easy way of calculating a totally different route. Tap this button if you can see a roadblock or a line of traffic ahead. You then have to choose how much of the route ahead you want to avoid.
Calculate alternative
Avoid roadblock
Choose from the different options: 100m, 500m, 2000m, 5000m. Your ONE/ XL/XXL will recalculate your route avoiding the section of the route for the distance you selected. Dont forget that once a new route is calculated, you may have to turn off the road you are on very soon. If the roadblock suddenly clears, tap Recalculate original to return to your original route.
17
Tap this button to change your route so that it passes a particular location, perhaps to pick someone up on the way. When you do this, a marker is shown on the map for the location you choose the travel via.
Travel via...
You choose the location you want to pass in the same way as you choose a destination. So you can select from all the same options: for example, Address, Favourite, Point of Interest and Point on map. Your ONE/XL/XXL will calculate a new route to your destination that passes the location you chose. Unlike your final destination, your ONE/XL/XXL does not inform you when you pass by this location. Using this button, you can only travel via one location. If you want to pass more than one, use an Itinerary. Tap this button to return to the original route without deviations to avoid roadblocks or travelling via particular locations.
Recalculate original
Tap this button to avoid a part of the route. Use this button if you see that your route includes a road or junction you dont like, or which is wellknown for traffic problems.
Avoid part of route
You then choose the road you want to avoid from a list of the roads on your route.
18
9.
Browse Map
Browse Map
To look at the map in the same way as you might look at a traditional paper map, tap Browse map in the Main Menu. You can move the map by touching the screen and moving your finger across the screen.
A The scale bar B Traffic - current traffic incidents. Use the Options button to select whether traffic information is shown on the map. When traffic information is shown on the map, POIs and Favourites are not shown. C Marker Markers point to your current location, your home location and your destination. The marker shows the distance to the location. Tap a marker to centre the map on the location pointed to by the marker. You can also set your own marker. Tap the cursor button, then tap Set marker position to place a marker at the cursor position. D GPS button Tap this button to centre the map on your current position. E Options F The cursor G The Find button Tap this button to find specific addresses. H The Cursor button
19
Tap this button to navigate to the cursor position, make a Favourite of the cursor position, or find a Point of Interest near the cursor position. I The zoom bar Zoom in and out by moving the slider.
Options
Tap the Options button to set the information shown on the map. You can choose to show the following information: Points of interest. Tap POI below the list of options to select which POIs are shown. Favourites Traffic - when traffic information is shown on the map, POIs and Favourites are not shown. Tap Advanced to show or hide the following information: Names Markers - markers point to your current location, your home location and your destination. The marker shows the distance to the location. Markers are shown when the location they point to are off the screen. Tap a marker to centre the map on the location pointed to by the marker. You can also set your own marker. Tap the cursor button, then tap Set marker position to place a marker at the cursor position. Coordinates
20
10.
With TomTom Map Share, you can correct errors on your map and share those corrections with other people in the TomTom Map Share community, as well as receiving corrections made by others. Note: TomTom Map Share is not available in all regions. For more information, go to tomtom.com/mapshare.
Map corrections
There are two types of map correction: Corrections that are immediately shown on the map. These include, changing the traffic flow of a street, blocking or renaming a street and adding or editing POIs. This type of change is immediately shown on your own map. You can hide these corrections at any time in the Map Share preferences menu. Corrections that are reported to TomTom but not shown immediately on your map. These include, missing streets, errors in motorway entrances and exits and missing roundabouts. This type of correction is investigated by TomTom and once verified, is included in the next map release. These corrections are therefore not shared with the Map Share community.
A list of possible map corrections is shown. 3. Select the type of correction you want to report. Note: If you tap Add missing POI or Report other error you will be asked for some additional information before the next step. 4. Select the method you want to use for selecting the location of the correction. 5. When you have found the location, tap Done. 6. Enter correction or confirmation of correction now.
21
Correction preferences
The correction preferences set the way TomTom Map Share works on your device. You can set the following preferences:
22
Use the trust level slider to choose the types corrections from the Map Share community you want to use on your maps. Decide if you want to share your corrections with others. Show or hide the report button in the Driving View. To set your preferences, Map corrections in the Main Menu. Tip: If you later decide you want to remove corrections from the map, clear the checkbox next to the types of correction you want to remove. If you clear all the checkboxes, your map returns to the original state before the first correction.
There are four levels of corrections that you can choose. The level changes when you move the slider: TomTom - only accept changes made by TomTom. Trusted sources - accept changes made by TomTom and by trusted users who have been verified by TomTom. Many users - accept changes made by TomTom, by trusted users who have been verified by TomTom and changes made by a high number of Map Share community members. Some users - accept changes made by TomTom, by trusted users who have been verified by TomTom and all changes that have been made by Map Share community members.
23
To make a correction to your map, tap Map corrections in the Main Menu then tap Correct a map error. The following types of corrections are shown. Tap this button to block or unblock a street. You can block or unblock the street in one or both directions.
(Un)block street
For example, to correct a street near to your current location, do the following: 1. Tap (Un)block street. 2. Tap Near you to select a street near your current location. You can select a street by name, a street near your Home location or a street on the map. 3. Select the street or section of a street you want to correct by tapping it on the map. The street you select is highlighted and the cursor shows the name of the street. 4. Tap Done. Your device shows the street and whether the traffic is blocked or allowed in each direction.
5. Tap one of the direction buttons to block or unblock the flow of traffic in that direction. 6. Tap Done. The next time you connect your device to TomTom HOME, your corrections are shared with the TomTom Map Share community. Tap this button to correct the traffic direction of a one-way street, where the direction of traffic is different to the direction shown on your map.
Reverse traffic direction
Note: Reverse traffic direction only works for one-way streets. If you select a two-way street you will be given the chance to block/unblock the street rather than changing the direction.
24
Tap this button to change the name of a street on your map. For example, to rename a street near to your current location:
Edit street name
1. Tap Edit street name. 2. Tap Near you. 3. Select the street or section of a street you want to correct by tapping it on the map. The street you select is highlighted and the cursor shows the name of the street. 4. Tap Done. 5. Type the correct street name. 6. Tap Done. Tap this button to change and report incorrect road turn directions.
Tap this button to change and report the road speed limit.
Tap this button to add a new Point of Interest (POI). For example to add a new restaurant near to your current location:
Add missing POI
1. Tap Add missing POI. 2. Tap Restaurant in the list of POI categories. 3. Tap Near you. 4. Select the location of the missing restaurant. You can select the location by entering the address or by selecting the location on the map. Select Near you or Near home to open the map at your current location or at your Home location. 5. Tap Done. 6. Type the name of the restaurant then tap OK. 7. If you know the telephone number of the restaurant you can type it, then tap OK. If you dont know the number, just tap OK without typing a number.
25
Tap this button to edit an existing POI. You can use this button to make the following changes to a POI:
Edit POI
Delete the POI. Rename the POI. Change the telephone number of the POI. Change the category that a POI belongs to. Move the POI on the map. Tap this button to edit an existing street. Once you have selected the street, you can select an error to report. You can select more than one type of error for a street.
Existing street
Tap this button to report a missing street. You have to select the start and end points of the missing street.
Missing street
City
Tap this button to report an error about a city. You can report the following types of error: City is missing Wrong city name Alternative city name Other Tap this button to send a comment about a POI. You must select the POI, and then you can enter your comment.
Comment on POI
Motorway entrance/exit
Postcode
Tap this button to report other types of corrections. These corrections are not immediately applied to your map. Your TomTom ONE/XL/XXL sends a special report to TomTom Map Share. You can report missing streets, errors in motorway entrances and exits and missing roundabouts. If the correction you want to report is not covered by any of these report types, enter a general description then tap Other.
Other
26
11.
Your TomTom ONE/XL/XXL plays the following kinds of sound: Spoken instructions Warnings
Selecting a voice
To change the voice being used by your TomTom ONE/XL/XXL, tap Voices in the Preferences menu, then tap Change voice. Select a voice from the list.
Voice preferences
27
12.
Preferences
Preferences
You can change the way your TomTom ONE/XL/XXL looks and behaves. Tap Change preferences in the Main Menu.
You might want to do this so that only frequently used buttons are shown. When you need to use the buttons that are hidden, you can tap Show ALL menu options in the Preferences menu to show all buttons. Tap this button in the Preferences menu, to show all the buttons available on your TomTom ONE/XL/XXL.
When should I use this? When its dark, it is easier to see the screen if the display on your ONE/XL/ XXL is not brightly lit. To change back to a brighter screen showing brighter colours on the map, tap Use day colours.
28
1. Tap Show POI on map in the Preferences menu. 2. Select the POI categories to display on the map. Tap Find to search for a POI category. 3. Select whether you want to show POIs using the 2D or 3D map view. 4. Tap Done. The POIs you have selected are shown as symbols on the map.
Safety preferences
Tap this button to set the following safety preferences: Show only essential menu options while driving
Safety preferences
Suggest driving breaks Show safety reminders Warn when near places of worship or schools Warn when driving faster than allowed Warn when driving faster than a set speed Warn me not to leave the device in the car Select whether or not your TomTom ONE/XL/XXL should warn you about which side of the road you should be driving on. Decide if you want the map display to be turned off in special circumstances and press Done. What happens when I use the Turn off map display option? When you turn off the map display, instead of seeing your position on a map in the Driving View, you will only see information about the next instruction. Tap the button and select an option for when the map should be turned off. These are the options: Always - The map will not be shown and you will only see information about the next instruction and arrows showing direction. Above a certain speed - you set the speed at which point the map will be turned off. This option is useful for situations when the map might be distracting, such as when you are driving fast. Never - the map is never turned off.
Guided tours
Tap this button to show one of the Guided tours on how to use your TomTom ONE/XL/XXL.
Guided tours
29
Tap this button to turn on sound. When you turn sound on, voice guidance remains off. To turn on voice guidance, tap Turn on voice guidance in the Preferences menu.
Turn on sound
Tips To change the volume, tap Volume preferences in the Preferences menu. To change the volume quickly while you are driving, tap the bottom left-hand section of the Driving View and move the slider. To change the voice being used by your ONE/XL/XXL, tap Change voice in the Voice preferences menu.
Volume preferences
Tap this button and then move the slider to change the volume.
Volume preferences
Manage Favourites
Tap this button to rename or delete Favourites. To find a Favourite, tap Find, then start to type the name of the Favourite. You can select the Favourite when it is shown in the list.
Manage Favourites
Do I need to use my actual home address for the Home location? No. Your Home location can be a place you go often, for example, your office. It can be your actual home address, but it can be any address you like. Why should I set a Home location? Having a Home location means that you have a quick and easy way to navigate there, by tapping the Home button in the Navigate to... menu
30
Change voice
Tap this button to change the voice which gives you instructions.
Change voice
Manage POIs
Tap this button to do the following: Set alerts for when you are near POIs.
Manage POIs
For example, your ONE/XL/XXL can tell you when there is a petrol station nearby. Create your own POI categories and add POIs to them. For example, you could create a category of POIs called Friends, and add all your friends addresses as POIs in the category. You can even add your friends phone numbers with their address so you can call them from your ONE/XL/XXL. The following buttons are available: Add POI - tap this button to add a location to a POI category you have created. Warn when near POI - tap this button to be warned when you approach a POI. You can select the types of POI for which you wish to be warned. Delete POI - tap this button to delete a POI you created. Edit POI - tap this button to edit the details of a POI you created. Add POI category - tap this button to create a new POI category. Delete POI category - tap this button to delete a POI category you created.
Turn on 2D display
31
When should I use this? In some situations, it is easier to see the map from above. Perhaps if the road network is complicated or for times when you are walking while using your ONE/XL/XXL to navigate.
Manage maps
Tap this button to do the following: Download a map - tap this button to download a map you have bought using TomTom HOME. It may not be possible to download maps on all devices. Switch map - tap this button to change the map you are using. Download free map corrections - tap this button to download map corrections provided as part of the Map Share service. Use TomTom HOME to make backups, download, add and delete maps from your navigation device.
Manage maps
You can also download more colour schemes using TomTom HOME.
Change language
Tap this button to change the language used for all the buttons and messages you see on your ONE/XL/XXL.
Change language
You can choose from a wide range of languages. When you change the language, you are also given the opportunity to change the voice.
32
Horizontal - if you choose this option, the status bar is shown at the bottom of the Driving view. Vertical - if you choose this option, the status bar is shown at the righthand side of the Driving view. Current time Speed Show max speed next to speed - only available when speed (above) is also selected. Note: If the speed limit for the road you are on is available, it is shown next to your speed. If you drive faster than the speed limit, your speed is shown in red. Show leeway to arrival time - your ONE/XL/XXL shows how late or early you will arrive, compared with the preferred arrival time that is set during the planning of a route. Direction Arrival time - your estimated arrival time. Remaining time - the estimated time left until you reach your destination. Remaining distance - the distance left until you reach your destination. Show lane guidance - if you choose this option, your ONE/XL/XXL shows the lane you should take in the status bar for some exits and junctions.
33
Show house number before street name Show street names - if you are using a computer voice for spoken instructions and have selected that street names should be read aloud, you do not need to select this option, since the street names will be read aloud even though this option is not selected. Show next street name Show current street name on map
Planning preferences
Tap this button to set the kind of route planned when you select a destination.
Planning preferences
The following options are available: Ask me every time I plan Always plan fastest routes Always plan eco routes Always plan shortest routes Always avoid motorways Always plan walking routes Always plan bicycle routes Always plan for limited speed Then set how your ONE/XL/XXL should handle the following when planning a route: Toll roads on the route Ferry crossings on the route HOV lanes on the route Carpool lanes Unpaved roads You can then set if the route summary screen closes automatically after you have planned a route. If you select No, you have to tap Done to close the route summary screen. Replanning preferences Select whether or not you want your TomTom ONE/XL/XXL to replan your route when a faster route is found while you drive. This might occur due to changes in the traffic situation.
34
Brightness preferences
Tap this button to set the brightness of the screen. Move the sliders to set the brightness separately for day map colours and for night map colours.
Brightness preferences
Set owner
Tap this button to enter your name and address as the owner of your ONE/ XL/XXL and to change or delete a 4-digit password for your ONE/XL/XXL.
Set owner
Note: You can only create a 4-digit password by using TomTom HOME. You can only change or delete a 4-digit password directly on your TomTom ONE/XL/XXL. You can create a 4-digit password for your ONE/XL/XXL using TomTom HOME: 1. Connect your ONE/XL/XXL to your computer. 2. Turn on your GO and then turn on your computer. TomTom HOME starts automatically. 3. Click Operate my device in TomTom HOME. Your ONE/XL/XXL is shown and can now be controlled using TomTom HOME. 4. In the Main Menu on your ONE/XL/XXL, click Change preferences. 5. Click Set Owner. Enter the new 4-digit password which will be used to protect your ONE/ XL/XXL.
Set units
Tap this button to set the type of units that will be shown for the following: Distance
Set units
Operate lefthanded
35
Keyboard preferences
You use the keyboard to enter your destination or to find an item in a list, such as a POI.
Keyboard preferences
Tap this button to select the size of the keys on the keyboard and the keyboard layout. You can select from two sizes: Large keyboard Small keyboard Several keyboard layouts are available: ABCD keyboard QWERTY keyboard AZERTY keyboard QWERTZ keyboard
Set clock
Tap this button to select the time format and to set the time. The easiest way to set the time is by tapping the Sync button. Your ONE/XL/ XXL will then take the time from GPS information. Note: You can only use Sync if you have GPS reception, so you cannot set the clock in this way when you are indoors. After using Sync to set the time, you may have to adjust the hours depending on your time zone. Your ONE/XL/XXL works out your time zone and always keeps the time correct using GPS information.
Set clock
Never dim screen Dim screen between instructions Then select whether or not the Device stays on when external power is lost.
36
13.
Points of Interest
Points of Interest
Points of Interest or POIs are useful places on the map. Here are some examples: Restaurants Hotels Museums Parking garages Petrol stations Note: You can report missing POIs or edit existing POIs using Map Share and share your corrections with the Map Share community.
Creating POIs
Note: You can also download sets of POIs and share the POI sets you create using TomTom HOME. 1. Tap the screen to bring up the Main Menu. 2. Tap Change preferences. 3. Tap Manage POIs.
4. Before you can add a POI, you have to create at least one POI category. Every POI is assigned to a POI category. You can only add POIs to POI categories you have created yourself. Tap Add POI category.
5. Enter a name for your POI category, for example, Friends or Favourite restaurants. Then select a marker for your POI category. 6. Tap Add POI. Tap this button to add a POI.
Add POI
37
7. You are asked to name the POI. 8. Select the POI category in which you want to add the POI. 9. Select the location of your POI from the list below. You can set your Home location as a POI. If you want to change your Home location, you can create a POI of the Home location before you change it. You can create a POI from a Favourite. You can only create a limited number of Favourites. If you want to create more Favourites you have to delete some Favourites first. Before you delete a Favourite, make it into a POI so that you dont lose the address. You can specify an address to be a POI. When you enter an address, you can choose from four options.
Address
Home
Favourite
City centre Street and house number Postcode Crossing or intersection Select a POI location from a list of places you have recently used as destinations.
Recent destination
You can add a Point of Interest (POI) as a POI. For example, if you are creating a category of POIs for your favourite restaurants, use this option instead of entering the addresses of the restaurants.
Point of Interest
Tap this button to add your current position as a POI. For example, if you stop somewhere you like, while you are there you can tap this button to create the POI. Tap this button to create a POI using the map browser. Select the location of the POI using the cursor, then tap Done.
Point on map
My location
Tap this button to create a POI by entering latitude and longitude values.
Latitude Longitude
Tap this button to select your last recorded position as your destination. This may be useful if your ONE/XL/XXL is unable to maintain a strong GPS signal, for example, when you drive through a long tunnel.
38
Note: You can report missing POIs or edit existing POIs using Map Share and share your corrections with the Map Share community.
Navigating to a POI
You can use a POI as your destination. For example, if you are travelling to an unfamiliar city, you could choose a POI to help find a parking garage. 1. Tap the screen to bring up the Main Menu. 2. Tap Navigate to... in the Main Menu. 3. Tap Point of Interest. 4. Narrow your choice of POIs by selecting the area where the POI is located. You can select one of these options: POI near you - to choose from a list of POIs near to your current location. POI in city - to find a POI in a particular town or city. POI near Home - to choose from a list of POIs near to your Home location. You can select from a list of POIs which are along your route or close to your destination. Choose from one of these options: POI along route POI near destination Note: The last POI you viewed is also shown so that you can plan a route there more quickly. 5. Type the name of the town you want to visit and select the town when it appears in the list. 6. Select the category of POI: Tap Any POI category to search for a POI by category name. Tap the category of POI, if it is shown. Tap the arrow to choose from the complete list of categories. Select the category from the list or start to type the name of the category and select it when it appears in the list. 7. Tap Parking garage. 8. From the list of POIs shown, select the POI you want to navigate to. The table below explains the distances listed next to each POI. POI near you POI in city POI near Home POI along route POI near destination Distance from your current location Distance from the city centre Distance from your Home location Distance from your current location Distance from your destination
39
If you know the name of the POI, tap Find and type the name. Select it from the list when it is shown. The next screen shows more detailed information including the location of the POI on the map and the phone number of the POI, if available. Tap Select to confirm you want to plan a route to this POI. Once you have selected a POI, the route to the POI is calculated by your TomTom ONE/XL/XXL.
2. Select the POI categories to display on the map. Tap Find to search for a POI by name. 3. Tap Done. The POIs you have selected are shown as symbols on the map.
4. Select the category of POI you want to be warned about. Select the category from the list or start to type the name of the category and select it when it is shown in the list. 5. Set how close the POI should be when you receive a warning. 6. Choose the warning sound for the category of POI you selected.
Managing POIs
Tap Manage POIs from the Preferences menu.
Manage POIs
You can, for example, do the following: Create your own POI categories and add POIs to them. Set warnings when you get close to POIs.
40
Why would I want to create my own POIs? A POI acts like a shortcut - once you have saved a location as a POI you never have to type the address of that POI again. But when you create a POI you can save more than just the location. Phone number - when you create a POI, you can save a phone number with it. Categories - when you create a POI you have to put it in a category. For example, you could create a category of POIs called Favourite restaurants. With each POI, save their phone number so that you can call them to reserve a table. Note: You can report missing POIs or edit existing POIs using Map Share and share your corrections with the Map Share community.
41
14.
Itinerary Planning
Itinerary Planning
What is an Itinerary?
An Itinerary is a plan for a journey including more locations than your final destination. An Itinerary can include the following items: Destination - a location on your journey where you want to stop. Waypoint - a location on your journey where you want to travel through without stopping.
Creating an Itinerary
1. Tap the screen to bring up the Main Menu.
42
2. Tap Itinerary planning. The Itinerary planning screen opens. At first, there are no items on the Itinerary.
Itinerary planning
3. Tap Add and select a location. Tip: You can add items to your Itinerary in any order and rearrange the order later.
Following an Itinerary
When you use an Itinerary to navigate, the route will be calculated to the first destination on the Itinerary. Your TomTom ONE/XL/XXL calculates the remaining distance and time to the first destination and not for the whole Itinerary. As soon as you start to use an Itinerary, the route is calculated from your current position. You do not need to set a departure point. When you have passed a waypoint or reached a destination, it is marked as visited. Waypoints are shown on the map. Your ONE/XL/XXL will not warn you, when you are approaching a waypoint or when you arrive at a waypoint.
Organising an Itinerary
Tap an item on your Itinerary to open a page of buttons for editing the item. The buttons shown below are available. You can change a destination into a waypoint using this button. Remember that waypoints are points on your journey to your destination that you want to pass and destinations are places where you want to stop. This button is only shown if the item you tapped is a destination. You can change a waypoint into a destination using this button. Remember that destinations are places where you want to stop, and waypoints are points on your journey to your destination that you want to pass. This button is only shown if the item you tapped is a waypoint. Tap this button to miss out part of your Itinerary. Your ONE/XL/XXL will ignore this item and all the items before it in the Itinerary.
Mark visited
Mark as waypoint
Mark as destination
It will navigate you to the next item in the Itinerary. This button is only shown if you are still due to visit this item. Tap this button to repeat part of your Itinerary. Your ONE/XL/XXL will navigate you to this item followed by the rest of the items in the Itinerary.
Mark to visit
This button is only shown if you have already visited this item.
43
Tap this button to move the item up the Itinerary. This button is unavailable if the item is at the top of the Itinerary.
Move item up
Tap this button to move the item down the Itinerary. This button is unavailable if the item is at the bottom of the Itinerary.
Move item down
Tap this button to see the location of the item on the map.
Show on map
Delete item
44
15.
Help me
Help me
Help me provides an easy way to navigate to emergency services centres and other specialist services and contact them by phone. For example, if you are involved in a car accident, you could use Help me to call the nearest hospital and tell them your exact location.
Options
Note: In some countries, information may not be available for all services. Tap this button to find the contact details and location of a service centre.
Drive to help
Walk to help
Tap this button to see your current location on the map. You can then tap Phone for help and select the type of service you want to contact and tell them your exact location.
Where am I?
Tap this button to read the British Red Cross First Aid guide.
Other guides
45
16.
Favourites
Favourites
Home
You cannot create a Favourite from another Favourite. This option will always be unavailable in this menu.
Favourite
To rename a Favourite, tap Manage Favourites in the Preferences menu. You can specify an address to be a Favourite. When you enter an address, you can choose from four options.
Address
City centre Street and house number Postcode Crossing or intersection Select a Favourite location from a list of places you have recently used as destinations.
Recent destination
46
You can add a Point of Interest (POI) as a Favourite. Does it make sense to do this?
Point of Interest
If you visit a POI you particularly like, for example a restaurant, you can add it as a Favourite. To add a POI as a Favourite, tap this button, then do the following: 1. Narrow your choice of POIs by selecting the area where the POI is. You can select one of these options: POI near you - to search from a list of POIs near your current position. POI in city - to choose a POI in a particular town or city. You have to specify a town or city. POI near Home - to search from a list of POIs near your Home location. If you are currently navigating to a destination, you can also select from a list of POIs which are on your route or near your destination. Choose one of these options: POI along route POI near destination 2. Select the category of POI. Tap the category of POI if it is shown or tap the arrow to choose from the complete list. Tap Any POI category to search for a POI by name. Tap this button to add your current position as a Favourite. For example, if you stop somewhere interesting, while you are there you can tap this button to create the Favourite. Tap this button to create a Favourite using the map browser. Select the location of the Favourite using the cursor, then tap Done.
My location
Point on map
Tap this button to create a Favourite by entering latitude and longitude values.
Latitude Longitude
Tap this button to select your last recorded position as your destination.
47
2. Tap Navigate to... 3. Tap Favourite. 4. Select a Favourite from the list. Your ONE/XL/XXL calculates the route for you. 5. When the route is calculated, tap Done. Your ONE/XL/XXL will immediately start guiding you to your destination with spoken instructions and visual instructions on the screen.
48
17.
49
To find the quickest route to your destination, do the following: 1. Tap the Traffic sidebar. 2. Tap Minimise traffic delays. Your device looks for the quickest route to your destination. The new route may also include traffic delays, or may even be the same route as before. 3. Tap Done.
1. Tap the TomTom Traffic button in the Main Menu on your device. 2. Tap Change Traffic preferences. You can change the following preferences: Beep when traffic situation on route changes - if you select this option your device beeps when a new traffic incident occurs on your current route. Tune manually by entering a frequency - if you select this option, the button Tune manually is shown in the Traffic menu. Tap Tune manually to enter the frequency of a particular radio station you want to use for RDSTMC traffic information. 3. Select or clear the check box next to each preference you want to change. 4. Tap Done. 5. Select what should happen if the traffic situation changes when you are driving and a faster route is found. You can choose from these options: Always switch to that route - your route will automatically be updated to the faster route. Ask me if I want that route - you are asked if you want to stay on your current route or switch to the faster route. Never change my route - your route is not changed and you are not asked if you want to change your route. 6. Tap Done.
Traffic incidents
Traffic incidents are displayed both on the Driving View and also on the Traffic sidebar as small symbols. There are two type of symbols: Symbols shown in a red square are traffic incidents. Your navigation device can replan to avoid them. Symbols shown in a red rectangle are weather related. Your device does not replan to avoid these warnings. Traffic incident symbols and their meaning are shown below: Accident
50
Traffic incident
Traffic jam Weather related symbols and their meaning are shown below: Fog
Rain
Wind
Ice
Snow
Note: The incident avoided symbol is shown for any traffic incident that you avoid using TomTom Traffic.
Tune manually
51
Your TomTom device looks for your radio station. If it doesn't find a radio station at the frequency you set, it automatically continues to search for the next available station.
3. Tap Change home-work 4. Set your home location 5. Set your work location. Note: The home location you set here is not the same as your Home location that you set in the Preferences menu and is shown in the Navigate to menu. You can now use the Home to work and Work to home buttons of the Show home-work traffic menu.
For example, to check for delays on your route home, do the following: 1. Tap TomTom Traffic in the Main Menu on your device. 2. Tap Show home-work traffic. 3. Tap Work to home. The Driving view is shown. To see if there is a quicker way home, tap Find alternative and then tap Minimise delays.
1. Tap the TomTom Traffic button in the Main Menu on your device. 2. Tap Browse map.
52
The map browser screen is shown. 3. Tap the blue compass image in the top right of the screen. The map centres itself on you current location, and any traffic incidents in the area are shown as small symbols.
4. Tap on any traffic incident to get more information. A second screen is shown that gives you detailed information about the incident you chose. To display information about surrounding incidents use the left and right arrows at the bottom of this second screen.
Traffic menu
Tap the Traffic sidebar in the Driving View to open the Traffic menu. The following buttons are available: Replans your route based on the latest traffic information.
Minimise delays
Tap this button to show areas of traffic congestion along your current route.
Show traffic on route
Browse map
53
18.
The TomTom Safety Alerts service warns you about a variety of locations including: Safety camera locations. Accident blackspot locations. Mobile safety camera locations. Average speed camera locations. Toll road camera locations. Traffic light camera locations. Important: Regularly connect your navigation device to TomTom HOME to update the list of locations for all types of safety alerts. The locations of mobile cameras are sent directly to your device. When a safety camera location is shown on the map, a warning sound is played to warn you that you are approaching an area where a safety camera is located. If you discover a location that has a safety camera but you receive no warning, you can report the new location to TomTom using your ONE/XL/XXL.
54
You can then set how close you want to be to a safety camera before you are warned and what type of sound will be played. For example, to change the sound that is played when you approach a fixed safety camera, do the following: 1. Tap TomTom Safety Cameras in the Main Menu. 2. Tap Change warning preferences. A list of safety camera types is displayed. A speaker is shown next to the speed camera types that have been set for an alert. 3. Tap Fixed safety cameras. 4. Tap NO to avoid removing the fixed safety camera alerts. 5. Enter the time in seconds for when a warning is given before you reach a camera. Then tap OK. 6. Tap the sound you want to be used for the warning. For example, to select a bugle sound tap on Bugle. Tips: To switch off warning sounds for a camera type, tap Silence instead of Bugle in step 6 above. To record your own warning sound for a camera type, tap Record warning instead of Bugle in step 6 above. 7. Tap YES to save your changes.
Report button
To show the report button in the Driving View, do the following: 1. Tap Services in the Main Menu. 2. Tap Safety Alerts. 3. Tap Enable report button. The report button is shown on left-hand side of the Driving View or if you are already using the quick menu, its added to the buttons available in the quick menu.
55
The locations of cameras you report are reported when you next connect your device to TomTom HOME.
Speed camera
This type of safety camera checks for vehicles breaking traffic rules at traffic lights.
Traffic light camera
56
This type of safety camera checks the average speed of vehicles between two fixed points.
Average speed check
This type of safety camera checks traffic on roads where access is restricted.
Vehicle restriction
All other types of camera that do not fall into any of the above categories.
Other camera
Tap this button to set the safety alerts you will receive and which sounds will be used for each alert.
Change warning preferences
Disable alerts
Tap this button to enable the report button. The report button is shown in the Driving View or in the quick menu.
Enable report button
57
19.
Fuel Prices
Fuel Prices
The Fuel Prices service sends up-to-date information about fuel prices to your device via TomTom HOME when your device is connected to your computer.
58
20.
TomTom HOME is a free application for your computer that helps you manage the contents of your TomTom ONE/XL/XXL navigation device. It is a good idea to frequently connect to HOME to ensure you always have the latest updates on your device. You can, for example, do the following: Manage maps, voices, POIs and more. Buy TomTom services and manage your subscriptions. Update your device automatically with the latest software and services. Make and restore backups. Read the full version of the user manual. Tip: We recommend using a broadband internet connection whenever you connect to HOME. It is a good idea to make regular backups of your navigation device using HOME.
MyTomTom Account
To download content and services using TomTom HOME, you need a MyTomTom account. You can create an account when you start using TomTom HOME.
59
21.
Addendum
Addendum
60
Battery
This product uses a Lithium-Ion battery. Do not use it in a humid, wet and/or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurized container, and do not expose it to temperatures over 60 C (140 F). Failure to follow these guidelines may cause the Lithium-Ion battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will not occur at low (below 0 C/32 F) or high (over 45 C/113 F) temperatures. Temperatures: Standard operation: -10 C (14 F) to +55 C (131 F); short period storage: -20 C (-4 F) to + 60 C (140 F); long period storage: -20 C (-4 F) to +25 C (77 F). Caution: risk of explosion if battery is replaced by an incorrect type. Do not remove or attempt to remove the non-user-replaceable battery. If you have a problem with the battery, please contact TomTom customer support. THE LITHIUM-ION BATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR DISPOSED OF PROPERLY. USE YOUR TOMTOM ONLY WITH THE SUPPLIED DC POWER LEAD (CAR CHARGER/BATTERY CABLE) AND AC ADAPTER (HOME CHARGER) FOR BATTERY CHARGING. Please use this device with the charger provided. For replacement chargers, go to tomtom.com for information about approved chargers for your device. To recycle your TomTom unit please see your local approved TomTom service center. The stated battery life is a maximum possible battery life. The maximum battery life will only be achieved under specific atmospheric conditions. The estimated maximum battery life is based on an average usage profile. For tips on extending the battery life, go to the FAQ listed below for your country: AU: www.tomtom.com/8703 CZ: www.tomtom.com/7509 DE: www.tomtom.com/7508 DK: www.tomtom.com/9298 ES: www.tomtom.com/7507 FI: www.tomtom.com/9299 FR: www.tomtom.com/7506 HU: www.tomtom.com/10251 IT: www.tomtom.com/7505 NL: www.tomtom.com/7504 PL: www.tomtom.com/7503 PT: www.tomtom.com/8029 RU: www.tomtom.com/10250 SE: www.tomtom.com/8704 UK: www.tomtom.com/7502 US: www.tomtom.com/7510
61
CE Marking
This equipment complies with the requirements for CE marking when used in a residential, commercial, vehicular or light industrial environment.
R&TTE directive
Hereby, TomTom declares that this personal navigation device is in compliance with the essential requirements and other relevant provisions of the EU Directive 1999/5/EC. The declaration of conformity can be found here: www.tomtom.com/legal.
WEEE directive
This symbol on the product or its packaging indicates that this product shall not be treated as household waste. In line with EU Directive 2002/96/EC for waste electrical and electronic equipment (WEEE), this electrical product must not be disposed of as unsorted municipal waste. Please dispose of this product by returning it to the point of sale or to your local municipal collection point for recycling.
This Document
Great care was taken in preparing this manual. Constant product development may mean that some information is not entirely up to date. The information in this document is subject to change without notice. TomTom shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the performance or use of this material. This document contains information protected by copyright. No part of this document may be photocopied or reproduced in any form without prior written consent from TomTom N.V.
62
22.
Copyright notices
Copyright notices
2009 TomTom N.V., The Netherlands. TomTom, and the "two hands" logo, among others, are Trademarks owned by TomTom N.V. or one of its subsidiaries. Please see www.tomtom.com/legal for warranties and end user licence agreements applying to this product.
2009 TomTom N.V., Niederlande. TomTom, das 'Zwei Hnde'-Logo usw. sind registrierte Marken von TomTom N.V. oder eines zugehrigen Tochterunternehmens. Die fr dieses Produkt geltenden Garantien und Endnutzerlizenzvereinbarungen finden Sie unter www.tomtom.com/legal.
2009 TomTom N.V., Pays-Bas. TomTom et le logo compos de deux mains , entre autres, font partie des marques commerciales appartenant TomTom N.V. ou l'une de ses filiales. L'utilisation de ce produit est rgie par notre garantie limite et le contrat de licence utilisateur final, que vous pouvez consulter l'adresse suivante : www.tomtom.com/legal
2009 TomTom N.V., Nederland. TomTom en het logo met twee handen zijn onder andere handelsmerken die eigendom zijn van TomTom N.V. of een van haar dochterondernemingen. Ga naar www.tomtom.com/legal voor garanties en licentieovereenkomsten voor eindgebruikers die van toepassing zijn op dit product.
2009 TomTom N.V., The Netherlands TomTom e il logo delle "due mani", fra gli altri, sono marchi registrati di propriet di TomTom N.V. o di una delle sue filiali. Consultare www.tomtom.com/legal per le garanzie e i contratti di licenza per l'utente finale applicabili a questo prodotto.
2009 TomTom NV, Pases Bajos. TomTom y el logotipo "dos manos" son marcas comerciales, aplicaciones o marcas registradas de TomTom NV. Nuestra garanta limitada y nuestro acuerdo de licencia de usuario final para el software integrado son de aplicacin para este producto; puede consultar ambos en www.tomtom.com/legal.
2009 TomTom International BV, Pasos Baixos. TomTom i el logotip amb les "dues mans" formen part de les marques comercials, aplicacions o marques comercials registrades propietat de TomTom International B.V. La nostra garantia limitada i l'acord de llicncia per a usuaris finals per al programari incls sn aplicables a aquest producte. Podeu consultar ambds documents a www.tomtom.com/legal
63
2009 TomTom N.V., Holanda. TomTom e o logtipo das "duas mos", entre outras, so marcas comerciais detidas pela TomTom N.V. ou por uma das suas subsidirias. V a www.tomtom.com/legal para consultar as garantias e o contratos de licena do utilizador final aplicveis a este produto.
2009 TomTom NV, Holland. TomTom og logoet med "de to hnder" er blandt de varemrker, produkter og registrerede varemrker, der tilhrer TomTom International B.V. Vores begrnsede garanti og slutbrugerlicensaftale for indlejret software glder for dette produkt; begge dokumenter findes p www.tomtom.com/legal.
2009 TomTom N.V., Alankomaat. Muun muassa TomTom ja kaksi ktt logo ovat TomTom N.V:n tai sen tytryhtiiden omistamia tavaramerkkej. Katso osoitteesta www.tomtom.com/legal tt tuotetta koskevat takuut ja kyttehtosopimukset.
2009 TomTom N.V., Nederland. TomTom, og de "to hender"-logoen, blant andre, er varemerker eid av TomTom N.V. eller en av deres underleverandrer. Vennligst se www.tomtom.com/legal for gjeldende garantier og lisensavtaler for sluttbrukere for dette produktet.
2009 TomTom NV, Nederlnderna. TomTom och logotypen "tv hnder" tillhr de varumrken, programvaror eller registrerade varumrken som gs av TomTom International B.V. Vr begrnsade garanti och vrt slutanvndarlicensavtal fr inbyggd programvara kan glla fr denna produkt. Du kan lsa dem bda p www.tomtom.com/legal.
2009 TomTom International BV, Nizozemsko. TomTom a logo se dvma dlanmi pat mezi obchodn znaky, aplikace nebo registrovan ochrann znmky ve vlastnictv spolenosti TomTom International B.V. Na tento produkt se vztahuje omezen zruka a smlouva s koncovm uivatelem pro vestavn software; do obou dokument mete nahldnout na www.tomtom.com/legal
2009 TomTom International BV, Hollandia. A TomTom s a "kt kz" emblma is a TomTom International B.V. ltal birtokolt vdjegyek, alkalmazsok s bejegyzett vdjegyek kz tartozik. A korltozott garancia s a benne foglalt szoftver vgfelhasznli licencszerzdse rvnyes erre a termkre; melyeket a kvetkez helyen tekinthet t: www.tomtom.com/legal
2009 TomTom N.V., Holandia. TomTom i logo z dwiema domi, oraz inne, s zarejestrowanymi znakami towarowymi firmy TomTom N.V. lub jednej z jej spek zalenych. Informacje o gwarancjach i umowach licencyjnych dla kocowego uytkownika tego produktu znajduj si na stronie www.tomtom.com/legal.
2009 TomTom International BV, Holandsko. TomTom a logo s "dvoma rukami" patria medzi ochrann znmky, aplikcie alebo registrovan ochrann znmky vlastnen spolonosou TomTom International B.V. Na tento produkt sa vzahuje obmedzen zruka a dohoda s koncovm uvateom pre
64
2009 TomTom International BV, Holland. TomTom ja "kahe ke" logo kuuluvad nende kaubamrkide, rakenduste vi registreeritud kaubamrkide hulka, mille omanikuks on TomTom International B.V. Sellele tootele kehtib meie piiratud garantii ja lppkasutaja litsentsileping manustarkvara jaoks; saad tutvuda mlemaga aadressil www.tomtom.com/legal
2009 TomTom International BV, Nyderlandai. TomTom ir dviej rank logotipas yra TomTom International B.V. vienas i preki enkl, program arba registruotj preks enkl. Ms ribota garantija ir galutinio naudotojo sutartis naudotis dtja programine ranga taikoma iam produktui; galite perirti abu dokumentus svetainje www.tomtom.com/legal
2009 TomTom International BV, Nyderlandai. TomTom ir dviej rank logotipas yra TomTom International B.V. vienas i preki enkl, program arba registruotj preks enkl. Ms ribota garantija ir galutinio naudotojo sutartis naudotis dtja programine ranga taikoma iam produktui; galite perirti abu dokumentus svetainje www.tomtom.com/legal
2009 TomTom International BV, Hollanda. TomTom ve "two hands" logolar TomTom International B.V.'ye ait ticari marka, uygulama veya kaytl ticari markalardr. Snrl garantimiz ve kattrlm yazlmn son kullanc lisans szlemesi bu rn iindir; www.tomtom.com/legal adresinden ikisine de gz atabilirsiniz
2009 TomTom N.V., Holanda. TomTom e o logotipo "duas mos" entre outros, so marcas comerciais de propriedade da TomTom N.V. ou de uma de suas subsidirias. Consulte www.tomtom.com/legal para obter garantias e contratos de licena de usurio final que se aplicam a este produto.
Data Source 2009 Tele Atlas N.V. Based upon: Topografische ondergrond Copyright dienst voor het kadaster en de openbare registers, Apeldoorn 2006. Ordnance Survey of Northern Ireland. IGN France. Swisstopo. BEV, GZ 1368/2003. Geonext/DeAgostini. Norwegian Mapping Authority, Public Roads Administration / Mapsolutions. DAV, violation of these copyrights shall cause legal proceedings. This product includes mapping data licensed from Ordnance Survey with the permission of the Controller of Her Majestys Stationery Office. Crown cop-
65
yright and/or database right 2009. All rights reserved. Licence number 100026920. Roskartographia
Some images are taken from NASAs Earth Observatory. The purpose of NASAs Earth Observatory is to provide a freely-accessible publication on the Internet where the public can obtain new satellite imagery and scientific information about our home planet. The focus is on Earths climate and environmental change: earthobservatory.nasa.gov/
66