HIGH VOLTAGE

Cables 66 - 500kV

Hengtong Cable Australia Pty Ltd

ABN 20 620 520 541
A : Suite 30610, Level 6, Southport Central 3,
Commercial, 9 Lawson Street, Southport
QLD 4215
T : 07 5636 6060
F : 07 5636 6061
M : 0438 099 888
E : [email protected]
W: www.hengtongaustralia.com EXCELLENCE IS JUST THE BEGINNING

Version 1-2021
 Contents

Company Introduction
Introduction 01 - 02

Single Core
38/66kV Copper/Aluminium 03 - 06
76/132kV Copper/Aluminium 07 - 10
87/150kV Copper/Aluminium 11 - 14
127/220kV Copper/Aluminium 15 - 18
160/275kV Copper/Aluminium 19 - 22
190/330kV Copper/Aluminium 23 - 26
220/400kV Copper/Aluminium 27 - 30
290/500kV Copper/Aluminium 31 - 34

Technical Information
Technical Information - Current Ratings 35
Thermal Resistivity of Soil Variation 36

All rights reserved. Any unauthorised usage, redistribution or

reproduction of part or all of the content in any form will constitute an
infringement of copyright. The data is only indicative and should not
be considered a binding representation or warranty from Hengtong
cables concerning a product's properties or usability. The data page is
not exhaustive and should be read in conjunction with Hengtong
cables other product data sheets, whether published or not. Hengtong
cables reserves the right to change the data page without prior notice.
 Company Introduction

Hengtong Cable Australia is part of the Hengtong Group of companies. Founded in 1991, Hengtong Group is an
international company with a diverse range of areas covering, Fibre Optic, Power Cable, Construction and
Maintenance, Financial Services, Capital Investment, Information Technology, and Tourism.

Hengtong Group has 70 wholly-owned companies and holding companies (some are listed on various Stock
Exchanges: Shanghai, Singapore, Hong Kong and Indonesia) with 9 manufacturing facilities based in Europe,
South America, South Africa, South Asia and Southeast Asia, as well as sales offices in over 40 countries and
regions around the world supplying products to over 150 countries.

Hengtong Group is the largest Optical Fibre and Power Cable manufacturer in China and the second largest in
the world. It is also in the top 2 largest Optical Fibre communication producers. Hengtong is implementing and
transforming to intelligent manufacturing, to make it the most advanced cable manufacturer in the world.

Hengtong High Voltage Park, lays claim to the tallest VCV tower in the world, standing at an incredible 180m
high. It currently houses 6 TROESTER VCV extruders.

Committing to innovation and social responsibility is at the heart of Hengtong. Hengtong has donated more
than 700M RMB to local charities.

Hengtong Group has an annual turnover of AUD $24 Billion and employs some 20,000 people. Hengtong Group
has a factory area of 200,000,000m² in China and 400,000m² internationally thus allowing Hengtong Cable
Australia the ability to supply projects of any size and type.

01 02
 38/66kV Single Core Cu/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Cu conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen
95 0.193 0.247 0.247 0.246 13.6 13.6 0.125 1.5 5.1 0.169 0.227 0.183 0.341 0.680
XLPE insulation
120 0.153 0.196 0.196 0.196 17.2 17.2 0.133 1.6 4.9 0.163 0.221 0.177 0.301 0.671
Insulation screen
150 0.124 0.159 0.159 0.159 21.5 21.5 0.149 1.8 5.0 0.155 0.213 0.170 0.272 0.664
Semi conductive water-blocking tape
185 0.0991 0.127 0.127 0.127 26.5 26.5 0.158 1.9 4.9 0.150 0.208 0.165 0.247 0.655
Corrugated aluminium
240 0.0754 0.0972 0.0972 0.0971 34.3 34.3 0.170 2.0 4.7 0.145 0.203 0.159 0.223 0.641

PVC inner sheath 300 0.0601 0.0781 0.0781 0.0778 42.9 42.9 0.195 2.3 4.9 0.138 0.196 0.153 0.208 0.633

HDPE outer sheath 400 0.047 0.0618 0.0618 0.0614 57.2 57.2 0.211 2.5 4.7 0.132 0.191 0.147 0.195 0.621
with graphite coating
500 0.0366 0.0492 0.0492 0.0486 71.5 64.0 0.231 2.8 4.6 0.127 0.185 0.142 0.185 0.607
Properties:
630 0.0283 0.0393 0.0393 0.0385 90.1 64.0 0.250 3.0 4.5 0.123 0.181 0.138 0.176 0.593
Rated voltage 38/66kV
800 0.0221 0.0323 0.0323 0.0312 114.5 64.0 0.294 3.5 4.8 0.118 0.176 0.132 0.170 0.582
Max. operating temperature of conductor 90℃
1000 0.0176 0.0250 0.0250 0.0247 143.1 64.0 0.338 4.0 4.6 0.114 0.172 0.129 0.166 0.560
Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃
Ambient temperature range for operating from - 40℃ to +50℃ 1200 0.0151 0.0222 0.0222 0.0218 171.7 64.0 0.366 4.4 4.5 0.111 0.169 0.126 0.163 0.547

Relative air humidity at temperature lower than +35℃ up to 95% 1600 0.0113 0.0181 0.0181 0.0176 229.0 64.0 0.406 4.8 4.5 0.106 0.165 0.121 0.159 0.531

Min. temperature for installing without preheating +0℃ 2000 0.009 0.0157 0.0157 0.0151 286.2 64.0 0.440 5.3 4.4 0.104 0.162 0.118 0.157 0.517
Standard AS/NZS 1429.2 2500 0.0072 0.0139 0.0139 0.0132 357.8 64.0 0.482 5.8 4.4 0.100 0.158 0.115 0.155 0.503
Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

95 11.6 13 2.0 1.7 1.8 66.2 4284 6.5 1324 993 95 350 380 345 307 316 302 298 296 289

120 13.0 13 2.0 1.7 1.8 67.6 4614 8.2 1352 1014 120 400 436 395 347 359 342 338 336 328

150 14.6 12 2.0 1.7 1.8 67.2 4810 10.2 1344 1008 150 453 497 447 389 403 383 377 377 367

185 16.2 12 2.0 1.7 1.8 68.8 5251 12.6 1376 1032 185 514 567 509 436 455 431 424 425 413

240 18.4 12 2.0 1.7 1.8 72.0 5951 16.3 1440 1080 240 600 665 595 501 526 497 488 493 477

300 20.6 11 2.0 1.7 1.8 72.2 6455 20.4 1444 1083 300 682 764 678 561 594 559 546 555 536

400 23.4 11 2.0 1.7 1.8 75.0 7490 27.2 1500 1125 400 780 885 779 630 676 631 613 632 606

500 26.6 11 2.0 1.7 1.8 78.2 8673 34.0 1564 1173 500 889 1024 892 703 768 711 686 718 683

630 29.9 11 2.0 2.0 2.0 82.5 10281 42.8 1650 1238 630 1006 1177 1016 780 870 795 762 814 765

800 33.6 10 2.0 2.0 2.0 85.2 11934 54.4 1704 1278 800 1123 1346 1142 852 973 877 834 911 844

1000 39.2 10 2.3 2.0 2.0 93.7 14669 68 1874 1406 1000 1269 1555 1314 929 1099 980 914 1031 948

1200 43.4 10 2.3 2.2 2.3 98.9 16939 81.6 1978 1484 1200 1354 1689 1414 974 1175 1036 961 1104 1004

1600 49.6 10 2.3 2.2 2.3 105.1 21022 108.8 2102 1577 1600 1491 1932 1581 1040 1309 1128 1030 1230 1097

2000 55.0 10 2.3 2.5 2.5 111.5 25263 136.0 2230 1673 2000 1592 2121 1708 1087 1411 1194 1080 1328 1164

03 2500 61.5 10 2.3 2.5 2.5 118.0 30227 170.0 2360 1770 2500 1684 2320 1829 1121 1507 1250 1118 1421 1223 04
 38/66kV Single Core Al/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Al conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen
95 0.320 0.411 0.411 0.411 9.0 9.0 0.125 1.5 5.1 0.169 0.227 0.183 0.468 0.680
XLPE insulation
120 0.253 0.325 0.325 0.325 11.3 11.3 0.133 1.6 4.9 0.163 0.221 0.177 0.401 0.671
Insulation screen
150 0.206 0.265 0.265 0.265 14.2 14.2 0.149 1.8 5.0 0.155 0.213 0.170 0.354 0.664
Semi conductive water-blocking tape
185 0.164 0.211 0.211 0.211 17.5 17.5 0.158 1.9 4.9 0.150 0.208 0.165 0.312 0.655
Corrugated aluminium
240 0.125 0.161 0.161 0.161 22.7 22.7 0.170 2.0 4.7 0.145 0.203 0.159 0.273 0.641

PVC inner sheath 300 0.100 0.129 0.129 0.129 28.3 28.3 0.195 2.3 4.9 0.138 0.196 0.153 0.248 0.633

HDPE outer sheath 400 0.0778 0.1009 0.1009 0.1009 37.8 37.8 0.211 2.5 4.7 0.132 0.191 0.147 0.226 0.621
with graphite coating
500 0.0605 0.0791 0.0791 0.0791 47.2 47.2 0.231 2.8 4.6 0.127 0.185 0.142 0.208 0.607
Properties:
630 0.0469 0.0622 0.0622 0.0622 59.5 59.5 0.250 3.0 4.5 0.123 0.181 0.138 0.195 0.593
Rated voltage 38/66kV
800 0.0367 0.0498 0.0498 0.0498 75.6 64.0 0.294 3.5 4.8 0.118 0.176 0.132 0.185 0.582
Max. operating temperature of conductor 90℃
1000 0.0291 0.0375 0.0375 0.0375 94.5 64.0 0.338 4.0 4.6 0.114 0.172 0.129 0.177 0.560
Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃
Ambient temperature range for operating from - 40℃ to +50℃ 1200 0.0247 0.0319 0.0319 0.0318 113.4 64.0 0.366 4.4 4.5 0.111 0.169 0.126 0.173 0.547

Relative air humidity at temperature lower than +35℃ up to 95% 1600 0.0186 0.0241 0.0241 0.0241 151.2 64.0 0.406 4.8 4.5 0.106 0.165 0.121 0.167 0.531

Min. temperature for installing without preheating +0℃ 2000 0.0149 0.0195 0.0195 0.0194 189.0 64.0 0.440 5.3 4.4 0.104 0.162 0.118 0.163 0.517
Standard AS/NZS 1429.2 2500 0.0127 0.0167 0.0167 0.0166 236.3 64.0 0.482 5.8 4.4 0.100 0.158 0.115 0.161 0.503
Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

95 11.6 13 2.0 1.7 1.8 66.2 3714 3.7 1324 993 95 272 294 268 239 245 235 232 230 225

120 13.0 13 2.0 1.7 1.8 67.6 3898 4.7 1352 1014 120 311 338 307 271 279 266 264 261 256

150 14.6 12 2.0 1.7 1.8 67.2 3909 5.9 1344 1008 150 353 385 347 304 313 298 295 293 286

185 16.2 12 2.0 1.7 1.8 68.8 4133 7.2 1376 1032 185 402 441 397 342 354 337 333 331 323

240 18.4 12 2.0 1.7 1.8 72.0 4493 9.4 1440 1080 240 471 518 465 395 410 390 385 384 374

300 20.6 11 2.0 1.7 1.8 72.2 4616 11.7 1444 1083 300 537 595 531 444 464 439 432 434 421

400 23.4 11 2.0 1.7 1.8 75.0 5105 15.6 1500 1125 400 620 693 615 504 531 501 491 497 481

500 26.6 11 2.0 1.7 1.8 78.2 5624 19.5 1564 1173 500 715 808 711 570 608 570 557 569 548

630 29.9 11 2.0 2.0 2.0 82.5 6401 24.6 1650 1238 630 820 936 819 642 695 645 628 650 621

800 33.6 10 2.0 2.0 2.0 85.2 6939 31.2 1704 1278 800 932 1083 936 715 787 723 700 737 697

1000 39.2 10 2.3 2.0 2.0 93.7 8438 39.0 1874 1406 1000 1080 1277 1100 802 908 827 789 852 801

1200 43.4 10 2.3 2.2 2.3 98.9 9515 46.8 1978 1484 1200 1179 1415 1210 859 992 895 848 932 868

1600 49.6 10 2.3 2.2 2.3 105.1 11123 62.4 2102 1577 1600 1348 1674 1406 951 1142 1012 942 1074 984

2000 55.0 10 2.3 2.5 2.5 111.5 12889 78.0 2230 1673 2000 1485 1899 1572 1023 1272 1107 1017 1198 1079

05 2500 61.5 10 2.3 2.5 2.5 118.0 14809 97.5 2360 1770 2500 1594 2100 1710 1070 1374 1176 1067 1296 1151 06
 76/132kV Single Core Cu/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Cu conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen
150 0.124 0.159 0.159 0.159 21.5 21.5 0.115 2.7 7.7 0.167 0.182 0.225 0.272 0.640
XLPE insulation
185 0.0991 0.127 0.127 0.127 26.5 26.5 0.121 2.9 7.5 0.162 0.176 0.220 0.247 0.631
Insulation screen
240 0.0754 0.0972 0.0972 0.0970 34.3 34.3 0.130 3.1 7.2 0.155 0.170 0.213 0.223 0.620
Semi conductive water-blocking tape
300 0.0601 0.0779 0.0779 0.0778 42.9 42.9 0.138 3.3 6.9 0.150 0.164 0.208 0.208 0.610
Corrugated aluminium

PVC inner sheath 400 0.047 0.0617 0.0617 0.0614 57.2 57.2 0.149 3.6 6.7 0.144 0.158 0.202 0.195 0.598

HDPE outer sheath 500 0.0366 0.0489 0.0489 0.0485 71.5 71.5 0.161 3.8 6.4 0.138 0.153 0.196 0.185 0.585

with graphite coating

630 0.0283 0.0390 0.0390 0.0384 90.1 75.0 0.173 4.1 6.2 0.134 0.149 0.192 0.176 0.571
Properties:
800 0.0221 0.0318 0.0318 0.0311 114.5 75.0 0.187 4.5 6.1 0.129 0.144 0.187 0.170 0.559
Rated voltage 76/132kV
Max. operating temperature of conductor 90℃ 1000 0.0176 0.0249 0.0249 0.0247 143.1 75.0 0.212 5.1 5.8 0.125 0.140 0.183 0.166 0.538

Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃ 1200 0.0151 0.0220 0.0220 0.0218 171.7 75.0 0.228 5.4 5.7 0.121 0.135 0.179 0.163 0.527
Ambient temperature range for operating from - 40℃ to +50℃
1600 0.0113 0.0179 0.0179 0.0176 229.0 75.0 0.250 6.0 5.5 0.116 0.130 0.174 0.159 0.512
Relative air humidity at temperature lower than +35℃ up to 95%
Min. temperature for installing without preheating +0℃ 2000 0.009 0.0155 0.0155 0.0151 286.2 75.0 0.270 6.4 5.4 0.113 0.127 0.171 0.157 0.499

Standard AS/NZS 1429.2 2500 0.0072 0.0137 0.0137 0.0132 357.8 75.0 0.293 7.0 5.3 0.109 0.123 0.167 0.155 0.486
Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

150 14.6 18 2.0 2.0 2.0 81.2 6235 10.2 1624 1218 150 448 485 443 386 401 382 379 379 369

185 16.2 18 2.0 2.0 2.0 82.8 6797 12.6 1656 1242 185 508 553 504 433 453 429 425 428 416

240 18.4 18 2.0 2.0 2.0 85.0 7507 16.3 1700 1275 240 592 649 588 497 524 495 488 495 479

300 20.6 18 2.0 2.0 2.0 87.2 8270 20.4 1744 1308 300 672 742 669 555 591 556 546 558 538

400 23.4 18 2.0 2.0 2.0 90.0 9369 27.2 1800 1350 400 768 858 768 623 673 628 613 635 609

500 26.6 18 2.0 2.0 2.0 93.2 10623 34.0 1864 1398 500 874 991 880 695 764 706 685 721 686

630 29.9 18 2.0 2.2 2.3 98.5 12360 42.8 1970 1477 630 989 1137 1001 771 865 790 762 817 768

800 33.6 18 2.0 2.2 2.3 102.2 14312 54.4 2044 1533 800 1103 1295 1125 840 968 871 832 914 849

1000 39.2 18 2.3 2.2 2.3 111.7 17500 68 2234 1676 1000 1243 1493 1289 891 1092 971 912 1034 949

1200 43.4 18 2.3 2.5 2.5 115.9 19697 81.6 2318 1739 1200 1327 1623 1387 958 1167 1026 955 1105 1004

1600 49.6 18 2.3 2.5 2.5 122.1 23937 108.8 2442 1832 1600 1465 1857 1553 1025 1300 1118 1024 1321 1097

2000 55.0 18 2.3 2.5 2.5 128.5 28130 136.0 2570 1928 2000 1565 2040 1679 1070 1402 1183 1073 1329 1164

07 2500 61.5 18 2.3 2.5 2.5 135.0 33295 170.0 2700 2025 2500 1661 2232 1802 1106 1499 1241 1113 1422 1225 08
 76/132kV Single Core Al/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Al conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen
150 0.206 0.264 0.264 0.264 14.2 14.2 0.115 2.7 7.7 0.167 0.182 0.225 0.354 0.640
XLPE insulation
185 0.164 0.211 0.211 0.211 17.5 17.5 0.121 2.9 7.5 0.162 0.176 0.220 0.312 0.631
Insulation screen
240 0.125 0.161 0.161 0.161 22.7 22.7 0.130 3.1 7.2 0.155 0.170 0.213 0.273 0.620
Semi conductive water-blocking tape

Corrugated aluminium 300 0.100 0.129 0.129 0.129 28.3 28.3 0.138 3.3 6.9 0.150 0.164 0.208 0.248 0.610

PVC inner sheath 400 0.0778 0.1008 0.1008 0.1006 37.8 37.8 0.149 3.6 6.7 0.144 0.158 0.202 0.226 0.598

HDPE outer sheath 500 0.0605 0.079 0.079 0.0787 47.2 47.2 0.161 3.8 6.4 0.138 0.153 0.196 0.208 0.585

with graphite coating

630 0.0469 0.062 0.062 0.0616 59.5 59.5 0.173 4.1 6.2 0.134 0.149 0.192 0.195 0.571
Properties:
800 0.0367 0.0495 0.0495 0.0489 75.6 75.0 0.187 4.5 6.1 0.129 0.144 0.187 0.185 0.559
Rated voltage 76/132kV
Max. operating temperature of conductor 90℃ 1000 0.0291 0.0375 0.0375 0.0375 94.5 75.0 0.212 5.1 5.8 0.125 0.140 0.183 0.177 0.538

Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃

1200 0.0247 0.0319 0.0319 0.0318 113.4 75.0 0.228 5.4 5.7 0.121 0.135 0.179 0.173 0.527
Ambient temperature range for operating from - 40℃ to +50℃
1600 0.0186 0.0241 0.0241 0.0241 151.2 75.0 0.250 6.0 5.5 0.116 0.130 0.174 0.167 0.512
Relative air humidity at temperature lower than +35℃ up to 95%
Min. temperature for installing without preheating +0℃ 2000 0.0149 0.0195 0.0195 0.0194 189.0 75.0 0.270 6.4 5.4 0.113 0.127 0.171 0.163 0.499

Standard AS/NZS 1429.2 2500 0.0127 0.0167 0.0167 0.0166 236.3 75.0 0.293 7.0 5.3 0.109 0.123 0.167 0.161 0.486
Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

150 14.6 18 2.0 2.0 2.0 81.2 5424 5.9 1624 1218 150 349 376 344 302 311 297 296 294 287

185 16.2 18 2.0 2.0 2.0 82.8 5679 7.2 1656 1242 185 398 430 393 341 353 336 334 333 325

240 18.4 18 2.0 2.0 2.0 85.0 6049 9.4 1700 1275 240 465 505 460 393 409 388 386 386 376

300 20.6 18 2.0 2.0 2.0 87.2 6432 11.7 1744 1308 300 529 578 524 411 462 437 433 436 423

400 23.4 18 2.0 2.0 2.0 90.0 6983 15.6 1800 1350 400 610 672 606 500 529 498 492 499 483

500 26.6 18 2.0 2.0 2.0 93.2 7574 19.5 1864 1398 500 703 782 701 565 605 566 557 571 550

630 29.9 18 2.0 2.2 2.3 98.5 8480 24.6 1970 1477 630 805 904 806 636 691 641 629 653 624

800 33.6 18 2.0 2.2 2.3 102.2 9318 31.2 2044 1533 800 913 1041 920 707 783 719 699 740 700

1000 39.2 18 2.3 2.2 2.3 111.7 11269 39.0 2234 1676 1000 1055 1224 1076 792 903 820 788 855 802

1200 43.4 18 2.3 2.5 2.5 115.9 12273 46.8 2318 1739 1200 1151 1358 1184 847 985 886 844 933 868

1600 49.6 18 2.3 2.5 2.5 122.1 14038 62.4 2442 1832 1600 1318 1605 1375 937 1135 1001 937 1075 983

2000 55.0 18 2.3 2.5 2.5 128.5 15756 78.0 2570 1928 2000 1453 1832 1537 1006 1270 1094 1009 1204 1077

09 2500 61.5 18 2.3 2.5 2.5 135.0 17828 97.5 2700 2025 2500 1563 2015 1674 1054 1365 1164 1060 1296 1149 10
 87/150kV Single Core Cu/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Cu conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen
185 0.0991 0.127 0.127 0.127 26.5 26.5 0.108 2.9 7.6 0.168 0.182 0.226 0.247 0.620
XLPE insulation

Insulation screen 240 0.0754 0.0971 0.0971 0.0970 34.3 34.3 0.118 3.2 7.5 0.160 0.174 0.218 0.223 0.612

Semi conductive water-blocking tape 300 0.0601 0.0779 0.0779 0.0778 42.9 42.9 0.125 3.4 7.2 0.154 0.169 0.212 0.208 0.601

Corrugated aluminium 400 0.047 0.0616 0.0616 0.0614 57.2 57.2 0.135 3.7 6.9 0.148 0.162 0.206 0.195 0.590

PVC inner sheath

500 0.0366 0.0488 0.0488 0.0485 71.5 71.5 0.145 4.0 6.6 0.143 0.158 0.201 0.185 0.575

HDPE outer sheath

630 0.0283 0.0389 0.0389 0.0384 90.1 80.0 0.156 4.3 6.4 0.138 0.152 0.196 0.176 0.564
with graphite coating
Properties: 800 0.0221 0.0317 0.0317 0.0311 114.5 80.0 0.173 4.7 6.4 0.132 0.147 0.190 0.170 0.553

Rated voltage 87/150kV

1000 0.0176 0.0249 0.0249 0.0247 143.1 80.0 0.196 5.4 6.1 0.127 0.142 0.185 0.166 0.534
Max. operating temperature of conductor 90℃
Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃ 1200 0.0151 0.0220 0.0220 0.0218 171.7 80.0 0.210 5.7 6.0 0.123 0.138 0.181 0.163 0.523

Ambient temperature range for operating from - 40℃ to +50℃

1600 0.0113 0.0179 0.0179 0.0176 229.0 80.0 0.231 6.3 5.8 0.118 0.133 0.177 0.159 0.507
Relative air humidity at temperature lower than +35℃ up to 95%
2000 0.009 0.0155 0.0155 0.0151 286.2 80.0 0.248 6.8 5.7 0.115 0.130 0.173 0.157 0.494
Min. temperature for installing without preheating +0℃
Standard AS/NZS 1429.2 2500 0.0072 0.0137 0.0137 0.0132 357.8 80.0 0.269 7.4 5.6 0.111 0.126 0.169 0.155 0.481

Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

185 16.2 22 2.0 2.0 2.0 90.8 7826 12.6 1816 1362 185 505 546 501 432 452 429 426 429 417

240 18.4 21 2.0 2.0 2.0 91.0 8289 16.3 1820 1365 240 589 642 586 496 523 494 488 496 481

300 20.6 21 2.0 2.0 2.0 93.2 9071 20.4 1864 1398 300 667 734 666 553 590 555 546 559 540

400 23.4 21 2.0 2.0 2.0 96.0 10195 27.2 1920 1440 400 763 848 764 621 671 626 613 636 610

500 26.6 21 2.0 2.2 2.3 101.2 11706 34.0 2024 1518 500 868 977 875 694 763 705 687 723 687

630 29.9 21 2.0 2.2 2.3 104.5 13255 42.8 2090 1567 630 982 1124 996 767 863 789 761 818 770

800 33.6 20 2.4 2.2 2.3 107.0 15324 54.4 2140 1605 800 1089 1284 1117 826 963 864 819 911 844

1000 39.2 20 2.4 2.5 2.5 115.9 18281 68 2318 1739 1000 1235 1519 1283 910 1102 967 906 1045 947

1200 43.4 20 2.4 2.5 2.5 120.1 20506 81.6 2402 1802 1200 1318 1610 1379 950 1164 1021 949 1104 1002

1600 49.6 20 2.4 2.5 2.5 127.3 24832 108.8 2546 1910 1600 1455 1837 1545 1018 1298 1114 1020 1231 1096

2000 55.0 20 2.4 2.5 2.5 133.7 29063 136.0 2674 2006 2000 1555 2019 1670 1063 1399 1180 1069 1328 1163

11 2500 61.5 20 2.4 2.5 2.5 140.2 34272 170.0 2804 2103 2500 1651 2210 1794 1100 1497 1238 1109 1422 1224 12
 87/150kV Single Core Al/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Al conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen
185 0.164 0.211 0.211 0.211 17.5 17.5 0.108 2.9 7.6 0.168 0.182 0.226 0.312 0.620
XLPE insulation

Insulation screen 240 0.125 0.161 0.161 0.161 22.7 22.7 0.118 3.2 7.5 0.160 0.174 0.218 0.273 0.612

Semi conductive water-blocking tape 300 0.100 0.129 0.129 0.129 28.3 28.3 0.125 3.4 7.2 0.154 0.169 0.212 0.248 0.601

Corrugated aluminium 400 0.0778 0.1008 0.1008 0.1006 37.8 37.8 0.135 3.7 6.9 0.148 0.162 0.206 0.226 0.590

PVC inner sheath

500 0.0605 0.0789 0.0789 0.0787 47.2 47.2 0.145 4.0 6.6 0.143 0.158 0.201 0.208 0.575

HDPE outer sheath

630 0.0469 0.0619 0.0619 0.0616 59.5 59.5 0.156 4.3 6.4 0.138 0.152 0.196 0.195 0.564
with graphite coating
Properties: 800 0.0367 0.0494 0.0494 0.0489 75.6 75.6 0.173 4.7 6.4 0.132 0.147 0.190 0.185 0.553

Rated voltage 87/150kV

1000 0.0291 0.0375 0.0375 0.0375 94.5 80.0 0.196 5.4 6.1 0.127 0.142 0.185 0.177 0.534
Max. operating temperature of conductor 90℃
Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃ 1200 0.0247 0.0319 0.0319 0.0318 113.4 80.0 0.210 5.7 6.0 0.123 0.138 0.181 0.173 0.523

Ambient temperature range for operating from - 40℃ to +50℃

1600 0.0186 0.0241 0.0241 0.0241 151.2 80.0 0.231 6.3 5.8 0.118 0.133 0.177 0.167 0.507
Relative air humidity at temperature lower than +35℃ up to 95%
2000 0.0149 0.0194 0.0194 0.0194 189.0 80.0 0.248 6.8 5.7 0.115 0.130 0.173 0.163 0.494
Min. temperature for installing without preheating +0℃
Standard AS/NZS 1429.2 2500 0.0127 0.0167 0.0167 0.0166 236.3 80.0 0.269 7.4 5.6 0.111 0.126 0.169 0.161 0.481

Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

185 16.2 22 2.0 2.0 2.0 90.8 6708 7.2 1816 1362 185 395 425 391 340 352 336 335 334 327

240 18.4 21 2.0 2.0 2.0 91.0 6831 9.4 1820 1365 240 462 500 458 392 408 388 386 387 377

300 20.6 21 2.0 2.0 2.0 93.2 7233 11.7 1864 1398 300 525 572 521 439 461 436 433 437 425

400 23.4 21 2.0 2.0 2.0 96.0 7809 15.6 1920 1440 400 606 665 603 499 528 497 492 500 485

500 26.6 21 2.0 2.2 2.3 101.2 8657 19.5 2024 1518 500 697 770 696 564 605 566 559 573 552

630 29.9 21 2.0 2.2 2.3 104.5 9375 24.6 2090 1567 630 799 893 801 634 690 640 628 654 625

800 33.6 20 2.4 2.2 2.3 107.0 10330 31.2 2140 1605 800 904 1032 914 698 780 715 692 739 698

1000 39.2 20 2.4 2.5 2.5 115.9 12049 39.0 2318 1739 1000 1048 1213 1071 787 901 818 785 855 801

1200 43.4 20 2.4 2.5 2.5 120.1 13082 46.8 2402 1802 1200 1143 1346 1177 841 983 883 840 932 867

1600 49.6 20 2.4 2.5 2.5 127.3 14933 62.4 2546 1910 1600 1308 1588 1367 931 1133 998 933 1075 982

2000 55.0 20 2.4 2.5 2.5 133.7 16689 78.0 2674 2006 2000 1442 1802 1528 1000 1260 1091 1005 1197 1076

13 2500 61.5 20 2.4 2.5 2.5 140.2 18804 97.5 2804 2103 2500 1552 1993 1664 1048 1363 1160 1056 1296 1148 14
 127/220kV Single Core Cu/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Cu conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen

XLPE insulation 400 0.047 0.0615 0.0615 0.0613 57.2 57.2 0.118 4.7 8.5 0.159 0.174 0.217 0.195 0.451

Insulation screen
500 0.0366 0.0487 0.0487 0.0485 71.5 71.5 0.126 5.0 8.2 0.153 0.167 0.211 0.185 0.440
Semi conductive water-blocking tape

Corrugated aluminium 630 0.0283 0.0388 0.0388 0.0384 90.1 90.1 0.138 5.5 8.1 0.146 0.161 0.204 0.176 0.431

PVC inner sheath

800 0.0221 0.0316 0.0316 0.0310 114.5 106 0.151 6.0 8.0 0.140 0.154 0.198 0.170 0.421
HDPE outer sheath
with graphite coating
1000 0.0176 0.0248 0.0248 0.0247 143.1 106 0.172 6.9 7.8 0.133 0.147 0.191 0.166 0.406
Properties:
Rated voltage 127/220kV
1200 0.0151 0.0220 0.0220 0.0218 171.7 106 0.184 7.3 7.6 0.130 0.144 0.188 0.163 0.394
Max. operating temperature of conductor 90℃
Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃ 1600 0.0113 0.0178 0.0178 0.0175 229.0 106 0.201 8.0 7.4 0.124 0.139 0.182 0.159 0.379
Ambient temperature range for operating from - 40℃ to +50℃
Relative air humidity at temperature lower than +35℃ up to 95% 2000 0.009 0.0154 0.0154 0.0151 286.2 106 0.216 8.6 7.2 0.121 0.135 0.179 0.157 0.367

Min. temperature for installing without preheating +0℃

Standard AS/NZS 1429.2 2500 0.0072 0.0135 0.0135 0.0131 357.8 106 0.234 9.3 7.0 0.118 0.133 0.176 0.155 0.351

Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

400 23.4 27 2.4 2.5 2.5 114.5 13209 27.2 2290 1718 400 748 824 752 612 668 621 621 637 609

500 26.6 27 2.4 2.5 2.5 118.0 14584 34.0 2360 1770 500 851 951 860 682 758 698 698 723 685

630 29.9 26 2.4 2.5 2.5 118.9 15825 42.8 2378 1784 630 963 1097 981 753 857 780 780 817 766

800 33.6 25 2.4 2.5 2.5 121.4 17583 54.4 2428 1821 800 1075 1250 1103 821 958 860 860 912 844

1000 39.2 24 2.6 2.5 2.5 126.5 20365 68 2530 1898 1000 1213 1449 1263 888 1079 953 953 1026 941

1200 43.4 24 2.6 2.5 2.5 133.0 22720 81.6 2660 1995 1200 1303 1579 1366 943 1168 1022 1022 1113 1010

1600 49.6 24 2.6 2.5 2.5 139.5 27150 108.8 2790 2093 1600 1431 1795 1522 996 1287 1099 1099 1225 1089

2000 55.0 24 2.8 2.5 2.5 146.5 31742 136.0 2930 2198 2000 1528 1973 1646 1037 1388 1163 1163 1323 1155

2500 61.5 24 2.8 2.5 2.5 157.5 37284 170.0 3150 2363 2500 1626 2147 1769 1082 1492 1228 1228 1424 1223
15 16
 127/220kV Single Core Al/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Al conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen

XLPE insulation 400 0.0778 0.101 0.101 0.101 37.8 37.8 0.118 4.7 8.5 0.159 0.174 0.217 0.226 0.451

Insulation screen
500 0.0605 0.0788 0.0788 0.0787 47.2 47.2 0.126 5.0 8.2 0.153 0.167 0.211 0.208 0.440
Semi conductive water-blocking tape

Corrugated aluminium 630 0.0469 0.0617 0.0617 0.0615 59.5 59.5 0.138 5.5 8.1 0.146 0.161 0.204 0.195 0.431

PVC inner sheath

800 0.0367 0.0491 0.0491 0.0488 75.6 75.6 0.151 6.0 8.0 0.140 0.154 0.198 0.185 0.421
HDPE outer sheath
with graphite coating
1000 0.0291 0.0375 0.0375 0.0375 94.5 94.5 0.172 6.9 7.8 0.133 0.147 0.191 0.177 0.406
Properties:
Rated voltage 127/220kV
1200 0.0247 0.0319 0.0319 0.0318 113.4 106 0.184 7.3 7.6 0.130 0.144 0.188 0.173 0.394
Max. operating temperature of conductor 90℃
Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃ 1600 0.0186 0.0241 0.0241 0.0241 151.2 106 0.201 8.0 7.4 0.124 0.139 0.182 0.167 0.379
Ambient temperature range for operating from - 40℃ to +50℃
Relative air humidity at temperature lower than +35℃ up to 95% 2000 0.0149 0.0194 0.0194 0.0194 189.0 106 0.216 8.6 7.2 0.121 0.135 0.179 0.163 0.367

Min. temperature for installing without preheating +0℃

Standard AS/NZS 1429.2 2500 0.0127 0.0167 0.0167 0.0166 236.3 106 0.234 9.3 7.0 0.118 0.133 0.176 0.161 0.351

Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

400 23.4 27 2.4 2.5 2.5 114.5 10823 15.6 2290 1718 400 595 646 594 494 526 494 492 502 485

500 26.6 27 2.4 2.5 2.5 118.0 11535 19.5 2360 1770 500 684 750 685 557 601 561 556 574 551

630 29.9 26 2.4 2.5 2.5 118.9 11945 24.6 2378 1784 630 785 872 790 625 686 635 624 654 624

800 33.6 25 2.4 2.5 2.5 121.4 12589 31.2 2428 1821 800 891 1005 902 694 777 712 694 739 699

1000 39.2 24 2.6 2.5 2.5 126.5 14133 39.0 2530 1898 1000 1029 1188 1054 772 894 808 773 851 798

1200 43.4 24 2.6 2.5 2.5 133.0 15296 46.8 2660 1995 1200 1129 1319 1165 836 987 885 840 941 875

1600 49.6 24 2.6 2.5 2.5 139.5 17251 62.4 2790 2093 1600 1285 1550 1344 913 1124 986 920 1070 977

2000 55.0 24 2.8 2.5 2.5 146.5 19368 78.0 2930 2198 2000 1414 1759 1502 976 1251 1075 987 1192 1068

2500 61.5 24 2.8 2.5 2.5 157.5 21817 97.5 3150 2363 2500 1522 1932 1634 1029 1357 1148 1045 1296 1144
17 18
 160/275kV Single Core Cu/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Cu conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen

XLPE insulation 400 0.047 0.0615 0.0615 0.0614 57.2 57.2 0.113 5.7 10.3 0.161 0.176 0.219 0.195 0.447

Insulation screen
500 0.0366 0.0487 0.0487 0.0485 71.5 71.5 0.120 6.1 9.8 0.155 0.169 0.213 0.185 0.435
Semi conductive water-blocking tape

Corrugated aluminium 630 0.0283 0.0387 0.0387 0.0384 90.1 90.1 0.131 6.6 9.7 0.148 0.163 0.206 0.176 0.427

PVC inner sheath

800 0.0221 0.0315 0.0315 0.0311 114.5 106 0.144 7.2 9.5 0.142 0.157 0.200 0.170 0.417
HDPE outer sheath
with graphite coating
1000 0.0176 0.0248 0.0248 0.0247 143.1 106 0.163 8.2 9.3 0.136 0.149 0.193 0.166 0.403
Properties:
Rated voltage 160/275kV
1200 0.0151 0.0219 0.0219 0.0218 171.7 106 0.174 8.7 9.1 0.131 0.146 0.190 0.163 0.390
Max. operating temperature of conductor 90℃
Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃ 1600 0.0113 0.0179 0.0179 0.0175 229.0 106 0.189 9.5 8.8 0.126 0.141 0.184 0.159 0.376
Ambient temperature range for operating from - 40℃ to +50℃
Relative air humidity at temperature lower than +35℃ up to 95% 2000 0.009 0.0154 0.0154 0.0151 286.2 106 0.203 10.2 8.6 0.123 0.137 0.181 0.157 0.363

Min. temperature for installing without preheating +0℃

Standard AS/NZS 1429.2 2500 0.0072 0.0135 0.0135 0.0131 357.8 106 0.220 11.0 8.3 0.121 0.135 0.179 0.155 0.346

Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

400 23.4 29 2.4 2.5 2.5 118.5 13840 27.2 2370 1778 400 743 818 747 609 665 617 607 635 607

500 26.6 29 2.4 2.5 2.5 122.0 15234 34.0 2440 1830 500 845 943 855 678 754 694 678 720 683

630 29.9 28 2.4 2.5 2.5 122.9 16481 42.8 2458 1843 630 956 1088 974 748 853 775 749 813 763

800 33.6 27 2.4 2.5 2.5 125.4 18249 54.4 2508 1881 800 1069 1240 1096 815 953 854 816 908 841

1000 39.2 26 2.6 2.5 2.5 130.5 21027 68 2610 1958 1000 1209 1434 1254 890 1073 948 893 1022 936

1200 43.4 26 2.6 2.5 2.5 137.0 23449 81.6 2740 2055 1200 1287 1556 1349 925 1148 1001 931 1094 991

1600 49.6 26 2.6 2.5 2.5 143.5 27880 108.8 2870 2153 1600 1423 1779 1512 989 1279 1093 998 1218 1085

2000 55.0 26 2.8 2.5 2.5 150.5 32545 136.0 3010 2258 2000 1520 1958 1637 1028 1380 1157 1040 1315 1149

2500 61.5 26 2.8 3.0 3.0 163.5 38769 170.0 3270 2453 2500 1620 2121 1761 1080 1488 1223 1099 1422 1219
19 20
 160/275kV Single Core Al/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Al conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen

XLPE insulation 400 0.0778 0.101 0.101 0.101 37.8 37.8 0.113 5.7 10.3 0.159 0.174 0.217 0.226 0.451

Insulation screen
500 0.0605 0.0788 0.0788 0.0787 47.2 47.2 0.120 6.1 9.8 0.153 0.167 0.211 0.208 0.440
Semi conductive water-blocking tape

Corrugated aluminium 630 0.0469 0.0617 0.0617 0.0616 59.5 59.5 0.131 6.6 9.7 0.146 0.161 0.204 0.195 0.431

PVC inner sheath

800 0.0367 0.0491 0.0491 0.0486 75.6 75.6 0.144 7.2 9.5 0.140 0.154 0.198 0.185 0.421
HDPE outer sheath
with graphite coating
1000 0.0291 0.0375 0.0375 0.0375 94.5 94.5 0.163 8.2 9.3 0.133 0.147 0.191 0.177 0.406
Properties:
Rated voltage 160/275kV
1200 0.0247 0.0319 0.0319 0.0318 113.4 106 0.174 8.7 9.1 0.130 0.144 0.188 0.173 0.394
Max. operating temperature of conductor 90℃
Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃ 1600 0.0186 0.0241 0.0241 0.0241 151.2 106 0.189 9.5 8.8 0.124 0.139 0.182 0.167 0.379
Ambient temperature range for operating from - 40℃ to +50℃
Relative air humidity at temperature lower than +35℃ up to 95% 2000 0.0149 0.0194 0.0194 0.0194 189.0 106 0.203 10.2 8.6 0.121 0.135 0.179 0.163 0.367

Min. temperature for installing without preheating +0℃

Standard AS/NZS 1429.2 2500 0.0127 0.0167 0.0167 0.0166 236.3 106 0.220 11.0 8.3 0.118 0.133 0.176 0.161 0.351

Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

400 23.4 29 2.4 2.5 2.5 118.5 11455 15.6 2290 1718 400 591 641 590 491 523 491 490 500 483

500 26.6 29 2.4 2.5 2.5 122.0 12185 19.5 2360 1770 500 680 744 680 554 598 558 554 571 549

630 29.9 28 2.4 2.5 2.5 122.9 12601 24.6 2378 1784 630 778 864 784 621 682 631 622 651 621

800 33.6 27 2.4 2.5 2.5 125.4 13255 31.2 2428 1821 800 895 998 896 689 774 707 690 737 696

1000 39.2 26 2.6 2.5 2.5 130.5 14796 39.0 2530 1898 1000 1025 1175 1046 772 889 803 774 847 794

1200 43.4 26 2.6 2.5 2.5 137.0 16025 46.8 2660 1995 1200 1114 1300 1149 821 970 867 926 925 858

1600 49.6 26 2.6 2.5 2.5 143.5 17981 62.4 2790 2093 1600 1277 1536 1334 907 1117 980 915 1065 972

2000 55.0 26 2.8 2.5 2.5 150.5 20171 78.0 2930 2198 2000 1407 1745 1492 968 1243 1068 979 1185 1062

2500 61.5 26 2.8 3.0 3.0 163.5 23301 97.5 3150 2363 2500 1515 1907 1624 1026 1352 1143 1044 1293 1139
21 22
 190/330kV Single Core Cu/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Cu conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen

XLPE insulation 500 0.0366 0.0487 0.0487 0.0485 71.5 71.5 0.120 7.2 11.7 0.156 0.170 0.214 0.185 0.433

Insulation screen
630 0.0283 0.0387 0.0387 0.0384 90.1 90.1 0.128 7.7 11.2 0.150 0.165 0.208 0.176 0.423
Semi conductive water-blocking tape

Corrugated aluminium
800 0.0221 0.0315 0.0315 0.0311 114.5 106 0.140 8.4 11.1 0.144 0.158 0.202 0.170 0.413
PVC inner sheath

HDPE outer sheath 1000 0.0176 0.0248 0.0248 0.0247 143.1 106 0.159 9.5 10.8 0.136 0.150 0.194 0.166 0.402
with graphite coating
Properties:
1200 0.0151 0.0220 0.0220 0.0218 171.7 106 0.169 10.1 10.5 0.132 0.147 0.190 0.163 0.388
Rated voltage 190/330kV
Max. operating temperature of conductor 90℃
1600 0.0113 0.0178 0.0178 0.0176 229.0 106 0.189 11.3 10.4 0.126 0.141 0.184 0.159 0.376
Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃
Ambient temperature range for operating from - 40℃ to +50℃
2000 0.009 0.0154 0.0154 0.0151 286.2 106 0.203 12.1 10.2 0.123 0.137 0.181 0.157 0.363
Relative air humidity at temperature lower than +35℃ up to 95%
Min. temperature for installing without preheating +0℃
2500 0.0072 0.0136 0.0136 0.0132 357.8 106 0.220 13.1 9.9 0.121 0.135 0.179 0.155 0.346
Standard AS/NZS 1429.2
Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

500 26.6 29 2.4 2.5 2.5 124.0 15432 34.0 2480 1860 500 844 944 852 674 750 690 674 714 678

630 29.9 29 2.4 2.5 2.5 126.9 17077 42.8 2538 1904 630 954 1081 970 744 848 770 745 809 758

800 33.6 28 2.4 2.5 2.5 129.4 18815 54.4 2588 1941 800 1065 1233 1090 810 947 848 811 902 835

1000 39.2 27 2.6 2.5 2.5 132.5 21410 68 2650 1988 1000 1205 1365 1252 883 1023 943 885 974 930

1200 43.4 27 2.6 2.5 2.5 139.0 23844 81.6 2780 2085 1200 1286 1555 1346 922 1141 996 927 1086 983

1600 49.6 26 2.6 2.5 2.5 143.5 27880 108.8 2870 2153 1600 1423 1783 1511 985 1270 1084 992 1207 1072

2000 55.0 26 2.8 2.5 2.5 150.5 32545 136.0 3010 2258 2000 1519 1964 1634 1023 1368 1144 1033 1301 1135

2500 61.5 26 2.8 3.0 3.0 163.5 38769 170.0 3270 2453 2500 1617 2144 1759 1068 1469 1207 1083 1398 1199
23 27
 190/330kV Single Core Al/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Al conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen

XLPE insulation 500 0.0605 0.0788 0.0788 0.0787 47.2 71.5 0.120 7.2 11.7 0.156 0.170 0.214 0.208 0.433

Insulation screen
630 0.0469 0.0617 0.0617 0.0615 59.5 90.1 0.128 7.7 11.2 0.150 0.165 0.208 0.195 0.423
Semi conductive water-blocking tape

Corrugated aluminium
800 0.0367 0.0491 0.0491 0.0488 75.6 106 0.140 8.4 11.1 0.144 0.158 0.202 0.185 0.413
PVC inner sheath

HDPE outer sheath 1000 0.0291 0.0375 0.0375 0.0375 94.5 106 0.159 9.5 10.8 0.136 0.150 0.194 0.177 0.402
with graphite coating
Properties:
1200 0.0247 0.0319 0.0319 0.0319 113.4 106 0.169 10.1 10.5 0.132 0.147 0.190 0.173 0.388
Rated voltage 190/330kV
Max. operating temperature of conductor 90℃
1600 0.0186 0.0241 0.0241 0.0241 151.2 106 0.189 11.3 10.4 0.126 0.141 0.184 0.167 0.376
Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃
Ambient temperature range for operating from - 40℃ to +50℃
2000 0.0149 0.0195 0.0195 0.0194 189.0 106 0.203 12.1 10.2 0.123 0.137 0.181 0.163 0.363
Relative air humidity at temperature lower than +35℃ up to 95%
Min. temperature for installing without preheating +0℃
2500 0.0127 0.0167 0.0167 0.0166 236.3 106 0.220 13.1 9.9 0.121 0.135 0.179 0.161 0.346
Standard AS/NZS 1429.2
Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

500 26.6 29 2.4 2.5 2.5 124.0 12383 19.5 2480 1860 500 678 745 679 551 595 555 551 567 534

630 29.9 29 2.4 2.5 2.5 126.9 13197 24.6 2538 1904 630 777 837 780 618 662 627 618 637 618

800 33.6 28 2.4 2.5 2.5 129.4 13821 31.2 2588 1941 800 882 998 891 685 773 702 686 737 692

1000 39.2 27 2.6 2.5 2.5 132.5 15178 39.0 2650 1988 1000 1017 1167 1043 765 882 798 767 840 788

1200 43.4 27 2.6 2.5 2.5 139.0 16419 46.8 2780 2085 1200 1114 1299 1147 817 964 861 821 918 851

1600 49.6 26 2.6 2.5 2.5 143.5 17981 62.4 2870 2153 1600 1278 1540 1334 903 1109 971 909 1055 961

2000 55.0 26 2.8 2.5 2.5 150.5 20171 78.0 3010 2258 2000 1407 1751 1492 963 1232 1058 971 1173 1049

2500 61.5 26 2.8 3.0 3.0 163.5 23301 97.5 3270 2453 2500 1516 1930 1626 1016 1336 1129 1030 1272 1122
25 26
 220/400kV Single Core Cu/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Cu conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen

XLPE insulation 630 0.0283 0.0386 0.0386 0.0384 90.1 90.1 0.122 8.4 12.2 0.156 0.170 0.214 0.176 0.412

Insulation screen

Semi conductive water-blocking tape 800 0.0221 0.0314 0.0314 0.0310 114.5 114.5 0.132 9.1 12.0 0.149 0.164 0.207 0.170 0.403

Corrugated aluminium

PVC inner sheath 1000 0.0176 0.0248 0.0248 0.0246 143.1 120 0.149 10.3 11.6 0.142 0.156 0.200 0.166 0.389

HDPE outer sheath

with graphite coating
1200 0.0151 0.0219 0.0219 0.0218 171.7 120 0.158 10.9 11.3 0.137 0.152 0.195 0.163 0.379
Properties:
Rated voltage 220/400kV
Max. operating temperature of conductor 90℃ 1600 0.0113 0.0177 0.0177 0.0175 229.0 120 0.176 12.2 11.1 0.131 0.146 0.189 0.159 0.365

Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃

Ambient temperature range for operating from - 40℃ to +50℃ 2000 0.009 0.0153 0.0153 0.0150 286.2 120 0.193 13.4 11.1 0.127 0.142 0.185 0.157 0.354
Relative air humidity at temperature lower than +35℃ up to 95%
Min. temperature for installing without preheating +0℃
2500 0.0072 0.0135 0.0135 0.0131 357.8 120 0.209 14.4 10.8 0.123 0.137 0.181 0.155 0.342
Standard AS/NZS 1429.2
Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

630 29.9 32 2.6 2.5 2.5 138.6 18888 42.8 2772 2079 630 939 1060 957 765 843 765 740 807 757

800 33.6 31 2.6 2.5 2.5 140.3 20634 54.4 2806 2105 800 1049 1208 1077 800 942 842 805 901 834

1000 39.2 30 2.8 2.5 2.5 145.6 23297 68 2912 2184 1000 1186 1398 1234 873 1063 936 881 1015 928

1200 43.4 30 2.8 2.5 2.5 149.8 25648 81.6 2996 2247 1200 1268 1519 1328 912 1136 989 923 1085 982

1600 49.6 29 2.8 3.0 3.0 156.0 30345 108.8 3120 2340 1600 1406 1737 1492 982 1268 1081 997 1211 1074

2000 55.0 28 3.0 3.0 3.0 161.8 34686 136.0 3236 2427 2000 1507 1913 1618 1027 1369 1146 1045 1308 1140

2500 61.5 28 3.0 3.0 3.0 168.3 40129 170.0 3366 2525 2500 1605 2096 1743 1066 1486 1206 1088 1402 1203
27 28
 220/400kV Single Core Al/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Al conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen

XLPE insulation 630 0.0469 0.0616 0.0616 0.0615 59.5 59.5 0.122 8.4 12.2 0.156 0.170 0.214 0.195 0.412

Insulation screen

Semi conductive water-blocking tape 800 0.0367 0.0490 0.0490 0.0488 75.6 75.6 0.132 9.1 12.0 0.149 0.164 0.207 0.185 0.403

Corrugated aluminium

PVC inner sheath 1000 0.0291 0.0375 0.0375 0.0375 94.5 94.5 0.149 10.3 11.6 0.142 0.156 0.200 0.177 0.389

HDPE outer sheath

with graphite coating
1200 0.0247 0.0319 0.0319 0.0318 113.4 113.4 0.158 10.9 11.3 0.137 0.152 0.195 0.173 0.379
Properties:
Rated voltage 220/400kV
Max. operating temperature of conductor 90℃ 1600 0.0186 0.0241 0.0241 0.0241 151.2 120 0.176 12.2 11.1 0.131 0.146 0.189 0.167 0.365

Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃

Ambient temperature range for operating from - 40℃ to +50℃ 2000 0.0149 0.0194 0.0194 0.0194 189.0 120 0.193 13.4 11.1 0.127 0.142 0.185 0.163 0.354
Relative air humidity at temperature lower than +35℃ up to 95%
Min. temperature for installing without preheating +0℃
2500 0.0127 0.0167 0.0167 0.0166 236.3 120 0.209 14.4 10.8 0.123 0.137 0.181 0.161 0.342
Standard AS/NZS 1429.2
Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

630 29.9 32 2.6 2.5 2.5 138.6 15008 24.6 2772 2079 630 764 842 770 612 675 623 615 647 617

800 33.6 31 2.6 2.5 2.5 140.3 15640 31.2 2806 2105 800 867 970 879 678 763 697 682 730 691

1000 39.2 30 2.8 2.5 2.5 145.6 17065 39.0 2912 2184 1000 1004 1144 1027 758 879 793 765 841 786

1200 43.4 30 2.8 2.5 2.5 149.8 18224 46.8 2996 2247 1200 1096 1268 1129 809 959 855 818 917 850

1600 49.6 29 2.8 3.0 3.0 156.0 20446 62.4 3120 2340 1600 1257 1498 1314 898 1105 967 911 1056 961

2000 55.0 28 3.0 3.0 3.0 161.8 22312 78.0 3236 2427 2000 1389 1703 1472 964 1231 1056 981 1176 1051

2500 61.5 28 3.0 3.0 3.0 168.3 24662 97.5 3366 2525 2500 1499 1883 1605 1012 1333 1125 1033 1274 1122
29 30
 290/500kV Single Core Cu/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Cu conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen

XLPE insulation
800 0.0221 0.0313 0.0313 0.0310 114.5 114.5 0.125 11.4 14.9 0.153 0.168 0.211 0.170 0.395
Insulation screen

Semi conductive water-blocking tape

1000 0.0176 0.0247 0.0247 0.0246 143.1 120 0.139 12.7 14.4 0.146 0.160 0.204 0.166 0.381
Corrugated aluminium

PVC inner sheath

HDPE outer sheath 1200 0.0151 0.0219 0.0219 0.0218 171.7 120 0.148 13.5 14.0 0.141 0.156 0.199 0.163 0.370

with graphite coating

Properties:
Rated voltage 290/500kV 1600 0.0113 0.0177 0.0177 0.0175 229.0 120 0.164 15.0 13.7 0.135 0.149 0.193 0.159 0.359

Max. operating temperature of conductor 90℃

Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃
2000 0.009 0.0153 0.0153 0.0150 286.2 120 0.180 16.4 13.6 0.130 0.145 0.188 0.157 0.348
Ambient temperature range for operating from - 40℃ to +50℃
Relative air humidity at temperature lower than +35℃ up to 95%
Min. temperature for installing without preheating +0℃
2500 0.0072 0.0134 0.0134 0.0131 357.8 120 0.194 17.6 13.3 0.126 0.140 0.184 0.155 0.336
Standard AS/NZS 1429.2
Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

800 33.6 34 2.9 3.0 3.0 149.9 22923 54.4 2998 2248 800 1033 1184 1061 786 928 827 795 888 820

1000 39.2 33 3.0 3.0 3.0 155.0 25492 68 3100 2325 1000 1169 1370 1215 859 1046 919 871 1000 912

1200 43.4 33 3.0 3.0 3.0 160.2 28011 81.6 3204 2403 1200 1249 1486 1307 898 1118 971 913 1069 966

1600 49.6 32 3.1 3.0 3.0 164.6 32262 108.8 3292 2469 1600 1385 1704 1469 960 1245 1058 978 1190 1054

2000 55.0 31 3.2 3.0 3.0 170.2 36514 136.0 3404 2553 2000 1486 1876 1594 1005 1344 1121 1027 1284 1119

2500 61.5 31 3.3 3.0 3.0 176.9 42183 170.0 3538 2654 2500 1586 2057 1720 1044 1442 1181 1070 1378 1181

31 32
 290/500kV Single Core Al/XLPE/CAS/PVC/HDPE Electrical Characteristics:
Max. D.C Max. A.C resistance Fault Fault Inductive reactance
resistance of conductor at 90℃ current current at 50Hz and 90℃
Nominal Conductor Charging Maximum Zero Zero
of carrying carrying
conductor to screen current dielectric sequence sequence
conductor of of
area capacitance per phase stress Trefoil Flat Flat resistance reactance
at 20℃ Trefoil Flat Flat conductor screen
Compacted or Milliken Al conductor touching touching spaced for 1 for 1 touching touching spaced at 20℃ at 50Hz
second second
Semi conductive screen tape
mm2 Ω/km Ω/km Ω/km Ω/km kA kA μF/km A/km kV/mm Ω/km Ω/km Ω/km Ω/km Ω/km
and conductor screen

XLPE insulation
800 0.0367 0.0490 0.0490 0.0488 75.6 75.6 0.125 11.4 14.9 0.153 0.168 0.211 0.185 0.395
Insulation screen

Semi conductive water-blocking tape

1000 0.0291 0.0375 0.0375 0.0375 94.5 94.5 0.139 12.7 14.4 0.146 0.160 0.204 0.177 0.381
Corrugated aluminium

PVC inner sheath

HDPE outer sheath 1200 0.0247 0.0319 0.0319 0.0318 113.4 113.4 0.148 13.5 14.0 0.141 0.156 0.199 0.173 0.370

with graphite coating

Properties:
Rated voltage 290/500kV 1600 0.0186 0.0241 0.0241 0.0241 151.2 120 0.164 15.0 13.7 0.135 0.149 0.193 0.167 0.359

Max. operating temperature of conductor 90℃

Max. short-circuit operation temperature of conductor (5s Max. duration) 250℃
2000 0.0149 0.0194 0.0194 0.0194 189.0 120 0.180 16.4 13.6 0.130 0.145 0.188 0.163 0.348
Ambient temperature range for operating from - 40℃ to +50℃
Relative air humidity at temperature lower than +35℃ up to 95%
Min. temperature for installing without preheating +0℃
2500 0.0127 0.0167 0.0167 0.0166 236.3 120 0.194 17.6 13.3 0.126 0.140 0.184 0.161 0.336
Standard AS/NZS 1429.2
Fault Level as per customer requirements

Current Ratings:
Application:
Continuous current-carrying capacity, A
Cables are designed for fixed installation, for laying in the ground, for indoor application and in cable ducts.
In air In ground In underground ducts

Structural Parameters: Nominal D/2 D/2 D/2

conductor
Nominal thickness area D D D
Nominal Approx. Nominal Nominal Approx. Approx. Max. allowable Min. bending Min. bending D D D
of outer sheath D D
conductor diameter thickness thickness overall weight pulling force radius during radius after
area of conductor. of insulation of aluminium diameter of cable of conductor installation installed
Inner layer Outer layer Single point Single point Single point Single point Single point Single point Single point Single point Single point
sheath of cable
bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or bonding or
mm2 mm mm mm mm mm mm kg/km kN mm mm mm2 cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding cross-bonding

800 33.6 34 2.9 3.0 3.0 149.9 17929 31.2 2998 2248 800 853 950 864 666 751 684 673 719 678

1000 39.2 33 3.0 3.0 3.0 155.0 19261 39.0 3100 2325 1000 987 1121 1010 745 864 777 755 827 772

1200 43.4 33 3.0 3.0 3.0 160.2 20586 46.8 3204 2403 1200 1077 1240 1109 795 943 839 808 902 834

1600 49.6 32 3.1 3.0 3.0 164.6 22362 62.4 3292 2469 1600 1237 1468 1291 878 1085 945 894 1037 942

2000 55.0 31 3.2 3.0 3.0 170.2 24140 78.0 3404 2553 2000 1368 1668 1447 943 1207 1032 963 1154 1030

2500 61.5 31 3.3 3.0 3.0 176.9 26715 97.5 3538 2654 2500 1478 1846 1580 990 1308 1100 1015 1250 1101

33 34
 Technical Information - Current Ratings Thermal Resistivity of Soil Variation
Continuous Current Ratings:
The continuous current ratings given in this catalogue have been based on the following standard operating conditions as per IEC 60287:

Maximum conductor temperature 90°C

Cable Laid in Single Way Ducts:
Ambient air temperature 40°C
Nominal Thermal resistivity (°C m/W)
Ambient soil temperature 25°C
conductor area
Soil thermal resistivity 1.2K.m/W mm² 0.7 0.8 0.9 1.0 1.5 2.0 2.5 3.0 3.5 4.0
The ratings are also based on the following standard installation conditions: 95 1.08 1.07 1.05 1.03 0.95 0.89 0.84 0.80 0.75 0.72
• In air, shaded, no wind
120 1.09 1.07 1.05 1.03 0.95 0.89 0.83 0.79 0.75 0.71
• Buried direct with a depth of laying of 0.8m to centre of cable or cable group
• In duct with a depth of laying of 0.8m to centre of duct 150 1.09 1.07 1.05 1.03 0.95 0.88 0.83 0.79 0.74 0.71
185 1.09 1.07 1.05 1.03 0.95 0.88 0.83 0.78 0.74 0.70
Single core cables are laid in the configurations indicated in the current rating tables and the screens are bonded at a single point or cross-bonded.
240 1.10 1.08 1.05 1.04 0.95 0.88 0.82 0.78 0.73 0.70

Emergency Rating: 300 1.10 1.08 1.06 1.04 0.95 0.87 0.82 0.77 0.72 0.69

400 1.11 1.08 1.06 1.04 0.94 0.87 0.82 0.77 0.72 0.68
XLPE insulated cables can operate under emergency conditions with a conductor temperature of 130°C for periods of up to 36 hours to a
maximum of three times per year. 500 1.12 1.08 1.06 1.04 0.94 0.87 0.81 0.76 0.71 0.68

630 1.12 1.09 1.06 1.04 0.94 0.87 0.81 0.76 0.71 0.67
However, due to high volume expansion of XLPE above 100°C, a limit of 105°C for emergency rating has become widely accepted and is
specified in AS/NZS 1429, IEC, and European specifications. A further restriction is evident where metal tape screens are specified; here the 800 1.13 1.10 1.07 1.04 0.94 0.86 0.80 0.75 0.71 0.67
overload temperature may have to be limited to 100°C. The 105°C emergency limit represents the following approximate percentage increase
1000 1.13 1.10 1.07 1.04 0.94 0.86 0.80 0.75 0.70 0.66
over the normal continuous ratings:
Cables in air: +14% 1200 1.13 1.10 1.07 1.05 0.93 0.86 0.80 0.75 0.70 0.66
Cables in ground (laid direct or in ducts): +11% 1600 1.14 1.11 1.08 1.05 0.93 0.85 0.80 0.74 0.70 0.65

2000 1.14 1.11 1.08 1.05 0.93 0.85 0.79 0.74 0.69 0.65
Rating Factors:
2500 1.14 1.12 1.08 1.06 0.92 0.85 0.79 0.74 0.69 0.64
Where it is desired to depart from the standard conditions, the rating correction factors given in the following tables should be applied.

Ambient Air Temperature Variation:

Air temp. (°C) 20 25 35 40 45 50 55
Cable Laid Direct in Ground:
Rating factor 1.18 1.14 1.05 1.00 0.95 0.89 0.84
Nominal Thermal resistivity (°C m/W)
conductor area
Ground Temperature Variation:
mm² 0.7 0.8 0.9 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Cables laid direct in ground or in ducts
95 1.22 1.16 1.12 1.07 0.91 0.81 0.73 0.68 0.63 0.59
Ground temp. (°C) 10 15 20 25 30 35 40
120 1.22 1.16 1.12 1.07 0.91 0.81 0.73 0.68 0.63 0.59
Rating factor 1.11 1.07 1.04 1.00 0.96 0.92 0.88
150 1.22 1.16 1.12 1.07 0.91 0.81 0.73 0.68 0.63 0.59

185 1.22 1.17 1.12 1.07 0.91 0.81 0.73 0.68 0.62 0.59
Depth of Burial Variation:
240 1.23 1.17 1.12 1.07 0.91 0.80 0.73 0.68 0.62 0.59
Cables laid direct in ground Cable laid direct in ducts
Depth of 300 1.23 1.17 1.12 1.07 0.91 0.80 0.73 0.68 0.62 0.59
burial (m) Rating factor Rating factor Rating factor 400 1.23 1.17 1.12 1.07 0.91 0.80 0.73 0.67 0.62 0.58
(up to 300mm2) (above 300mm2) (single core)
500 1.23 1.17 1.12 1.07 0.91 0.80 0.73 0.67 0.62 0.58
0.80 1.00 1.00 1.00
630 1.23 1.17 1.12 1.07 0.91 0.80 0.73 0.67 0.61 0.58
1.00 0.98 0.97 0.98
800 1.23 1.17 1.12 1.07 0.91 0.80 0.72 0.66 0.61 0.58
1.25 0.96 0.95 0.95
1000 1.24 1.18 1.12 1.07 0.91 0.80 0.72 0.66 0.61 0.58
1.50 0.95 0.93 0.94
1.75 0.94 0.91 0.92 1200 1.24 1.18 1.12 1.07 0.91 0.80 0.72 0.65 0.60 0.57

2.00 0.92 0.89 0.91 1600 1.24 1.18 1.12 1.07 0.91 0.80 0.71 0.65 0.60 0.57

2.50 0.91 0.88 0.89 2000 1.24 1.18 1.13 1.07 0.91 0.79 0.71 0.65 0.60 0.57

3.00 0.90 0.86 0.88 2500 1.25 1.18 1.13 1.08 0.92 0.79 0.70 0.64 0.60 0.56

35 36